Commit 2eb2a436 authored by Paul Mundt's avatar Paul Mundt

sh: SH7786 SMP support.

SH7786 is roughly identical to SH-X3 proto SMP, though there are only 2
CPUs. This just wraps in to the existing SH-X3 SMP code with some minor
changes for SH7786, including wiring up the IPIs properly, enabling
IRQ_PER_CPU, and so forth.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent b29fa1fb
...@@ -71,6 +71,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ ...@@ -71,6 +71,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
config GENERIC_IRQ_PROBE config GENERIC_IRQ_PROBE
def_bool y def_bool y
config IRQ_PER_CPU
def_bool y
config GENERIC_GPIO config GENERIC_GPIO
def_bool n def_bool n
...@@ -414,6 +417,8 @@ config CPU_SUBTYPE_SH7786 ...@@ -414,6 +417,8 @@ config CPU_SUBTYPE_SH7786
select CPU_HAS_PTEAEX select CPU_HAS_PTEAEX
select ARCH_SPARSEMEM_ENABLE select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
config CPU_SUBTYPE_SHX3 config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor" bool "Support SH-X3 processor"
...@@ -651,7 +656,7 @@ config NR_CPUS ...@@ -651,7 +656,7 @@ config NR_CPUS
int "Maximum number of CPUs (2-32)" int "Maximum number of CPUs (2-32)"
range 2 32 range 2 32
depends on SMP depends on SMP
default "4" if CPU_SHX3 default "4" if CPU_SUBTYPE_SHX3
default "2" default "2"
help help
This allows you to specify the maximum number of CPUs which this This allows you to specify the maximum number of CPUs which this
......
...@@ -16,7 +16,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o ...@@ -16,7 +16,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# SMP setup # SMP setup
smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o smp-$(CONFIG_CPU_SHX3) := smp-shx3.o
# Primary on-chip clocks (common) # Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o
......
...@@ -595,9 +595,8 @@ enum { ...@@ -595,9 +595,8 @@ enum {
HSPI, HSPI,
GPIO0, GPIO1, GPIO0, GPIO1,
Thermal, Thermal,
INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7, INTICI0, INTICI1, INTICI2, INTICI3,
INTICI4, INTICI5, INTICI6, INTICI7,
/* interrupt groups */
}; };
static struct intc_vect vectors[] __initdata = { static struct intc_vect vectors[] __initdata = {
...@@ -638,10 +637,12 @@ static struct intc_vect vectors[] __initdata = { ...@@ -638,10 +637,12 @@ static struct intc_vect vectors[] __initdata = {
INTC_VECT(HSPI, 0xe80), INTC_VECT(HSPI, 0xe80),
INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0), INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
INTC_VECT(Thermal, 0xee0), INTC_VECT(Thermal, 0xee0),
INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
}; };
/* FIXME: Main CPU support only now */
#if 1 /* Main CPU */
#define CnINTMSK0 0xfe410030 #define CnINTMSK0 0xfe410030
#define CnINTMSK1 0xfe410040 #define CnINTMSK1 0xfe410040
#define CnINTMSKCLR0 0xfe410050 #define CnINTMSKCLR0 0xfe410050
...@@ -654,21 +655,6 @@ static struct intc_vect vectors[] __initdata = { ...@@ -654,21 +655,6 @@ static struct intc_vect vectors[] __initdata = {
#define CnINT2MSKCR1 0xfe410a34 #define CnINT2MSKCR1 0xfe410a34
#define CnINT2MSKCR2 0xfe410a38 #define CnINT2MSKCR2 0xfe410a38
#define CnINT2MSKCR3 0xfe410a3c #define CnINT2MSKCR3 0xfe410a3c
#else /* Sub CPU */
#define CnINTMSK0 0xfe410034
#define CnINTMSK1 0xfe410044
#define CnINTMSKCLR0 0xfe410054
#define CnINTMSKCLR1 0xfe410064
#define CnINT2MSKR0 0xfe410b20
#define CnINT2MSKR1 0xfe410b24
#define CnINT2MSKR2 0xfe410b28
#define CnINT2MSKR3 0xfe410b2c
#define CnINT2MSKCR0 0xfe410b30
#define CnINT2MSKCR1 0xfe410b34
#define CnINT2MSKCR2 0xfe410b38
#define CnINT2MSKCR3 0xfe410b3c
#endif
#define INTMSK2 0xfe410068 #define INTMSK2 0xfe410068
#define INTMSKCLR2 0xfe41006c #define INTMSKCLR2 0xfe41006c
...@@ -753,6 +739,9 @@ static struct intc_prio_reg prio_registers[] __initdata = { ...@@ -753,6 +739,9 @@ static struct intc_prio_reg prio_registers[] __initdata = {
GPIO1, Thermal } }, GPIO1, Thermal } },
{ 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } }, { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
{ 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } }, { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
{ 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
{ INTICI7, INTICI6, INTICI5, INTICI4,
INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
}; };
static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL, static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment