ARM: EXYNOS: add support for EXYNOS5440 SoC

This patch adds support for EXYNOS5440 SoC which is including
ARM Cortex-A15 Quad cores.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-exynos/Kconfig

@@ -67,6 +67,15 @@ config SOC_EXYNOS5250
 	help
 	  Enable EXYNOS5250 SoC support
 
+config SOC_EXYNOS5440
+	bool "SAMSUNG EXYNOS5440"
+	default y
+	depends on ARCH_EXYNOS5
+	select ARM_ARCH_TIMER
+	select AUTO_ZRELADDR
+	help
+	  Enable EXYNOS5440 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
@@ -417,9 +426,9 @@ config MACH_EXYNOS4_DT
 
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	default y
 	depends on ARCH_EXYNOS5
 	select ARM_AMBA
-	select SOC_EXYNOS5250
 	select USE_OF
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.

arch/arm/mach-exynos/Makefile

@@ -14,9 +14,9 @@ obj-				:=
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
-obj-$(CONFIG_ARCH_EXYNOS5)	+= clock-exynos5.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
+obj-$(CONFIG_SOC_EXYNOS5250)	+= clock-exynos5.o
 
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o

arch/arm/mach-exynos/common.c

@@ -58,9 +58,11 @@ static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
 static const char name_exynos5250[] = "EXYNOS5250";
+static const char name_exynos5440[] = "EXYNOS5440";
 
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
+static void exynos5440_map_io(void);
 static void exynos4_init_clocks(int xtal);
 static void exynos5_init_clocks(int xtal);
 static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
@@ -99,6 +101,12 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init_uarts	= exynos_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos5250,
+	}, {
+		.idcode		= EXYNOS5440_SOC_ID,
+		.idmask		= EXYNOS5_SOC_MASK,
+		.map_io		= exynos5440_map_io,
+		.init		= exynos_init,
+		.name		= name_exynos5440,
 	},
 };
 
@@ -113,6 +121,15 @@ static struct map_desc exynos_iodesc[] __initdata = {
 	},
 };
 
+static struct map_desc exynos5440_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(EXYNOS5440_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S3C_VA_SYS,
@@ -279,6 +296,15 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	},
 };
 
+static struct map_desc exynos5440_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(EXYNOS5440_PA_UART0),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	},
+};
+
 void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -286,11 +312,29 @@ void exynos4_restart(char mode, const char *cmd)
 
 void exynos5_restart(char mode, const char *cmd)
 {
-	__raw_writel(0x1, EXYNOS_SWRESET);
+	u32 val;
+	void __iomem *addr;
+
+	if (of_machine_is_compatible("samsung,exynos5250")) {
+		val = 0x1;
+		addr = EXYNOS_SWRESET;
+	} else if (of_machine_is_compatible("samsung,exynos5440")) {
+		val = (0x10 << 20) | (0x1 << 16);
+		addr = EXYNOS5440_SWRESET;
+	} else {
+		pr_err("%s: cannot support non-DT\n", __func__);
+		return;
+	}
+
+	__raw_writel(val, addr);
 }
 
 void __init exynos_init_late(void)
 {
+	if (of_machine_is_compatible("samsung,exynos5440"))
+		/* to be supported later */
+		return;
+
 	exynos_pm_late_initcall();
 }
 
@@ -303,7 +347,11 @@ void __init exynos_init_late(void)
 void __init exynos_init_io(struct map_desc *mach_desc, int size)
 {
 	/* initialize the io descriptors we need for initialization */
+	if (of_machine_is_compatible("samsung,exynos5440"))
+		iotable_init(exynos5440_iodesc, ARRAY_SIZE(exynos5440_iodesc));
+	else
 		iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+
 	if (mach_desc)
 		iotable_init(mach_desc, size);
 
@@ -389,6 +437,11 @@ static void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
+static void __init exynos5440_map_io(void)
+{
+	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
+}
+
 static void __init exynos5_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -604,8 +657,9 @@ int __init combiner_of_init(struct device_node *np, struct device_node *parent)
 	return 0;
 }
 
-static const struct of_device_id exynos4_dt_irq_match[] = {
+static const struct of_device_id exynos_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
 	{ .compatible = "samsung,exynos4210-combiner",
 			.data = combiner_of_init, },
 	{},
@@ -622,7 +676,7 @@ void __init exynos4_init_irq(void)
 		gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
 #ifdef CONFIG_OF
 	else
-		of_irq_init(exynos4_dt_irq_match);
+		of_irq_init(exynos_dt_irq_match);
 #endif
 
 	if (!of_have_populated_dt())
@@ -639,7 +693,7 @@ void __init exynos4_init_irq(void)
 void __init exynos5_init_irq(void)
 {
 #ifdef CONFIG_OF
-	of_irq_init(exynos4_dt_irq_match);
+	of_irq_init(exynos_dt_irq_match);
 #endif
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
@@ -669,7 +723,7 @@ static int __init exynos4_l2x0_cache_init(void)
 {
 	int ret;
 
-	if (soc_is_exynos5250())
+	if (soc_is_exynos5250() || soc_is_exynos5440())
 		return 0;
 
 	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
@@ -1010,6 +1064,8 @@ static int __init exynos_init_irq_eint(void)
 		}
 	}
 #endif
+	if (soc_is_exynos5440())
+		return 0;
 
 	if (soc_is_exynos5250())
 		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);

arch/arm/mach-exynos/include/mach/irqs.h

@@ -333,6 +333,11 @@
 #define EXYNOS5_IRQ_FIMC_LITE1		IRQ_SPI(126)
 #define EXYNOS5_IRQ_RP_TIMER		IRQ_SPI(127)
 
+/* EXYNOS5440 */
+
+#define EXYNOS5440_IRQ_UART0		IRQ_SPI(2)
+#define EXYNOS5440_IRQ_UART1		IRQ_SPI(3)
+
 #define EXYNOS5_IRQ_PMU			COMBINER_IRQ(1, 2)
 
 #define EXYNOS5_IRQ_SYSMMU_GSC0_0	COMBINER_IRQ(2, 0)

arch/arm/mach-exynos/include/mach/map.h

@@ -53,6 +53,7 @@
 #define EXYNOS4_PA_ONENAND_DMA		0x0C600000
 
 #define EXYNOS_PA_CHIPID		0x10000000
+#define EXYNOS5440_PA_CHIPID		0x00160000
 
 #define EXYNOS4_PA_SYSCON		0x10010000
 #define EXYNOS5_PA_SYSCON		0x10050100
@@ -281,6 +282,10 @@
 #define EXYNOS5_PA_UART3		0x12C30000
 #define EXYNOS5_SZ_UART			SZ_256
 
+#define EXYNOS5440_PA_UART0		0x000B0000
+#define EXYNOS5440_PA_UART1		0x000C0000
+#define EXYNOS5440_SZ_UART		SZ_256
+
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-exynos/include/mach/regs-pmu.h

@@ -31,6 +31,7 @@
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 #define EXYNOS_SWRESET				S5P_PMUREG(0x0400)
+#define EXYNOS5440_SWRESET			S5P_PMUREG(0x00C4)
 
 #define S5P_WAKEUP_STAT				S5P_PMUREG(0x0600)
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -75,20 +75,33 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 	{},
 };
 
-static void __init exynos5250_dt_map_io(void)
+static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
+				"exynos4210-uart.0", NULL),
+	{},
+};
+
+static void __init exynos5_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
+
+	if (of_machine_is_compatible("samsung,exynos5250"))
 		s3c24xx_init_clocks(24000000);
 }
 
-static void __init exynos5250_dt_machine_init(void)
+static void __init exynos5_dt_machine_init(void)
 {
+	if (of_machine_is_compatible("samsung,exynos5250"))
 		of_platform_populate(NULL, of_default_bus_match_table,
 				     exynos5250_auxdata_lookup, NULL);
+	else if (of_machine_is_compatible("samsung,exynos5440"))
+		of_platform_populate(NULL, of_default_bus_match_table,
+				     exynos5440_auxdata_lookup, NULL);
 }
 
-static char const *exynos5250_dt_compat[] __initdata = {
+static char const *exynos5_dt_compat[] __initdata = {
 	"samsung,exynos5250",
+	"samsung,exynos5440",
 	NULL
 };
 
@@ -96,11 +109,11 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.init_irq	= exynos5_init_irq,
 	.smp		= smp_ops(exynos_smp_ops),
-	.map_io		= exynos5250_dt_map_io,
+	.map_io		= exynos5_dt_map_io,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= exynos5250_dt_machine_init,
+	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
-	.dt_compat	= exynos5250_dt_compat,
+	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 MACHINE_END

arch/arm/mach-exynos/mct.c

@@ -19,7 +19,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/percpu.h>
+#include <linux/of.h>
 
+#include <asm/arch_timer.h>
 #include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 
@@ -476,8 +478,13 @@ static void __init exynos4_timer_resources(void)
 #endif /* CONFIG_LOCAL_TIMERS */
 }
 
-static void __init exynos4_timer_init(void)
+static void __init exynos_timer_init(void)
 {
+	if (soc_is_exynos5440()) {
+		arch_timer_of_register();
+		return;
+	}
+
 	if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
 		mct_int_type = MCT_INT_SPI;
 	else
@@ -489,5 +496,5 @@ static void __init exynos4_timer_init(void)
 }
 
 struct sys_timer exynos4_timer = {
-	.init		= exynos4_timer_init,
+	.init		= exynos_timer_init,
 };

arch/arm/mach-exynos/setup-i2c0.c

@@ -20,7 +20,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	if (soc_is_exynos5250())
+	if (soc_is_exynos5250() || soc_is_exynos5440())
 		/* will be implemented with gpio function */
 		return;
 

arch/arm/plat-samsung/include/plat/cpu.h

@@ -43,6 +43,7 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5440_SOC_ID	0x54400000
 #define EXYNOS5_SOC_MASK	0xFFFFF000
 
 #define IS_SAMSUNG_CPU(name, id, mask)		\
@@ -62,6 +63,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -130,6 +132,12 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos5250()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5440)
+# define soc_is_exynos5440()	is_samsung_exynos5440()
+#else
+# define soc_is_exynos5440()	0
+#endif
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ

drivers/tty/serial/samsung.c

@@ -1646,7 +1646,8 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 #endif
 
 #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
-	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
+	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \
+	defined(CONFIG_SOC_EXYNOS5440)
 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
 	.info = &(struct s3c24xx_uart_info) {
 		.name		= "Samsung Exynos4 UART",