OPP: decouple dt properties in opp_parse_supplies()

The opp-microwatt property was added with the intention of providing
platforms a way to specify a precise value for the power consumption
of a device at a given OPP to enable better energy-aware scheduling
decisions by informing the kernel of the total static and dynamic
power of a device at a given OPP, removing the reliance on the EM
subsystem's often flawed estimations. This property is parsed by
opp_parse_supplies(), which creates a hard dependency on the
opp-microvolt property.

Some platforms, such as Apple Silicon, do not describe their device's
voltage regulators in the DT as they cannot be controlled by the kernel
and/or rely on opaque firmware algorithms to control their voltage and
current characteristics at runtime. We can, however, experimentally
determine the power consumption of a given device at a given OPP, taking
advantage of opp-microwatt to provide EAS on such devices as was
initially intended.

Allow platforms to specify and consume any subset of opp-microvolt,
opp-microamp, or opp-microwatt without a hard dependency on
opp-microvolt to enable this functionality on such platforms.
Tested-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

drivers/opp/of.c

@@ -654,9 +654,12 @@ static u32 *opp_parse_microvolt(struct dev_pm_opp *opp, struct device *dev,
 		/*
 		 * Missing property isn't a problem, but an invalid
 		 * entry is. This property isn't optional if regulator
-		 * information is provided.
+		 * information is provided. Check only for the first OPP, as
+		 * regulator_count may get initialized after that to a valid
+		 * value.
 		 */
-		if (opp_table->regulator_count > 0) {
+		if (list_empty(&opp_table->opp_list) &&
+		    opp_table->regulator_count > 0) {
 			dev_err(dev, "%s: opp-microvolt missing although OPP managing regulators\n",
 				__func__);
 			return ERR_PTR(-EINVAL);
@@ -674,7 +677,7 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 	bool triplet;
 
 	microvolt = opp_parse_microvolt(opp, dev, opp_table, &triplet);
-	if (IS_ERR_OR_NULL(microvolt))
+	if (IS_ERR(microvolt))
 		return PTR_ERR(microvolt);
 
 	microamp = _parse_named_prop(opp, dev, opp_table, "microamp", NULL);
@@ -689,7 +692,17 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 		goto free_microamp;
 	}
 
+	/*
+	 * Initialize regulator_count if it is uninitialized and no properties
+	 * are found.
+	 */
+	if (unlikely(opp_table->regulator_count == -1)) {
+		opp_table->regulator_count = 0;
+		return 0;
+	}
+
 	for (i = 0, j = 0; i < opp_table->regulator_count; i++) {
+		if (microvolt) {
 			opp->supplies[i].u_volt = microvolt[j++];
 
 			if (triplet) {
@@ -699,6 +712,7 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 				opp->supplies[i].u_volt_min = opp->supplies[i].u_volt;
 				opp->supplies[i].u_volt_max = opp->supplies[i].u_volt;
 			}
+		}
 
 		if (microamp)
 			opp->supplies[i].u_amp = microamp[i];