pinctrl: add lpc18xx pinctrl driver

Pinctrl driver for the System Control Unit (SCU) found on NXP
LPC18xx/43xx devices.

Driver uses the generic pinctrl DT bindings for multiplexing
and property settings.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/Kconfig

@@ -88,6 +88,15 @@ config PINCTRL_LANTIQ
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_LPC18XX
+	bool "NXP LPC18XX/43XX SCU pinctrl driver"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	default ARCH_LPC18XX
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
+
 config PINCTRL_FALCON
 	bool
 	depends on SOC_FALCON

drivers/pinctrl/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
+obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o

drivers/pinctrl/pinctrl-lpc18xx.c

+/*
+ * Pinctrl driver for NXP LPC18xx/LPC43xx System Control Unit (SCU)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "core.h"
+#include "pinctrl-utils.h"
+
+/* LPC18XX SCU analog function registers */
+#define LPC18XX_SCU_REG_ENAIO0		0xc88
+#define LPC18XX_SCU_REG_ENAIO1		0xc8c
+#define LPC18XX_SCU_REG_ENAIO2		0xc90
+#define LPC18XX_SCU_REG_ENAIO2_DAC	BIT(0)
+
+/* LPC18XX SCU pin register definitions */
+#define LPC18XX_SCU_PIN_MODE_MASK	0x7
+#define LPC18XX_SCU_PIN_EPD		BIT(3)
+#define LPC18XX_SCU_PIN_EPUN		BIT(4)
+#define LPC18XX_SCU_PIN_EHS		BIT(5)
+#define LPC18XX_SCU_PIN_EZI		BIT(6)
+#define LPC18XX_SCU_PIN_ZIF		BIT(7)
+#define LPC18XX_SCU_PIN_EHD_MASK	0x300
+#define LPC18XX_SCU_PIN_EHD_POS		8
+
+#define LPC18XX_SCU_I2C0_EFP		BIT(0)
+#define LPC18XX_SCU_I2C0_EHD		BIT(2)
+#define LPC18XX_SCU_I2C0_EZI		BIT(3)
+#define LPC18XX_SCU_I2C0_ZIF		BIT(7)
+#define LPC18XX_SCU_I2C0_SCL_SHIFT	0
+#define LPC18XX_SCU_I2C0_SDA_SHIFT	8
+
+#define LPC18XX_SCU_FUNC_PER_PIN	8
+
+struct lpc18xx_scu_data {
+	struct pinctrl_dev *pctl;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+/* LPC18xx pin types */
+enum {
+	TYPE_ND,	/* Normal-drive */
+	TYPE_HD,	/* High-drive */
+	TYPE_HS,	/* High-speed */
+	TYPE_I2C0,
+	TYPE_USB1,
+};
+
+/* LPC18xx pin functions */
+enum {
+	FUNC_R,		/* Reserved */
+	FUNC_ADC,
+	FUNC_ADCTRIG,
+	FUNC_CAN0,
+	FUNC_CAN1,
+	FUNC_CGU_OUT,
+	FUNC_CLKIN,
+	FUNC_CLKOUT,
+	FUNC_CTIN,
+	FUNC_CTOUT,
+	FUNC_DAC,
+	FUNC_EMC,
+	FUNC_EMC_ALT,
+	FUNC_ENET,
+	FUNC_ENET_ALT,
+	FUNC_GPIO,
+	FUNC_I2C0,
+	FUNC_I2C1,
+	FUNC_I2S0_RX_MCLK,
+	FUNC_I2S0_RX_SCK,
+	FUNC_I2S0_RX_SDA,
+	FUNC_I2S0_RX_WS,
+	FUNC_I2S0_TX_MCLK,
+	FUNC_I2S0_TX_SCK,
+	FUNC_I2S0_TX_SDA,
+	FUNC_I2S0_TX_WS,
+	FUNC_I2S1,
+	FUNC_LCD,
+	FUNC_LCD_ALT,
+	FUNC_MCTRL,
+	FUNC_NMI,
+	FUNC_QEI,
+	FUNC_SDMMC,
+	FUNC_SGPIO,
+	FUNC_SPI,
+	FUNC_SPIFI,
+	FUNC_SSP0,
+	FUNC_SSP0_ALT,
+	FUNC_SSP1,
+	FUNC_TIMER0,
+	FUNC_TIMER1,
+	FUNC_TIMER2,
+	FUNC_TIMER3,
+	FUNC_TRACE,
+	FUNC_UART0,
+	FUNC_UART1,
+	FUNC_UART2,
+	FUNC_UART3,
+	FUNC_USB0,
+	FUNC_USB1,
+};
+
+static const char *const lpc18xx_function_names[] = {
+	[FUNC_R]		= "",
+	[FUNC_ADC]		= "adc",
+	[FUNC_ADCTRIG]		= "adctrig",
+	[FUNC_CAN0]		= "can0",
+	[FUNC_CAN1]		= "can1",
+	[FUNC_CGU_OUT]		= "cgu_out",
+	[FUNC_CLKIN]		= "clkin",
+	[FUNC_CLKOUT]		= "clkout",
+	[FUNC_CTIN]		= "ctin",
+	[FUNC_CTOUT]		= "ctout",
+	[FUNC_DAC]		= "dac",
+	[FUNC_EMC]		= "emc",
+	[FUNC_EMC_ALT]		= "emc_alt",
+	[FUNC_ENET]		= "enet",
+	[FUNC_ENET_ALT]		= "enet_alt",
+	[FUNC_GPIO]		= "gpio",
+	[FUNC_I2C0]		= "i2c0",
+	[FUNC_I2C1]		= "i2c1",
+	[FUNC_I2S0_RX_MCLK]	= "i2s0_rx_mclk",
+	[FUNC_I2S0_RX_SCK]	= "i2s0_rx_sck",
+	[FUNC_I2S0_RX_SDA]	= "i2s0_rx_sda",
+	[FUNC_I2S0_RX_WS]	= "i2s0_rx_ws",
+	[FUNC_I2S0_TX_MCLK]	= "i2s0_tx_mclk",
+	[FUNC_I2S0_TX_SCK]	= "i2s0_tx_sck",
+	[FUNC_I2S0_TX_SDA]	= "i2s0_tx_sda",
+	[FUNC_I2S0_TX_WS]	= "i2s0_tx_ws",
+	[FUNC_I2S1]		= "i2s1",
+	[FUNC_LCD]		= "lcd",
+	[FUNC_LCD_ALT]		= "lcd_alt",
+	[FUNC_MCTRL]		= "mctrl",
+	[FUNC_NMI]		= "nmi",
+	[FUNC_QEI]		= "qei",
+	[FUNC_SDMMC]		= "sdmmc",
+	[FUNC_SGPIO]		= "sgpio",
+	[FUNC_SPI]		= "spi",
+	[FUNC_SPIFI]		= "spifi",
+	[FUNC_SSP0]		= "ssp0",
+	[FUNC_SSP0_ALT]		= "ssp0_alt",
+	[FUNC_SSP1]		= "ssp1",
+	[FUNC_TIMER0]		= "timer0",
+	[FUNC_TIMER1]		= "timer1",
+	[FUNC_TIMER2]		= "timer2",
+	[FUNC_TIMER3]		= "timer3",
+	[FUNC_TRACE]		= "trace",
+	[FUNC_UART0]		= "uart0",
+	[FUNC_UART1]		= "uart1",
+	[FUNC_UART2]		= "uart2",
+	[FUNC_UART3]		= "uart3",
+	[FUNC_USB0]		= "usb0",
+	[FUNC_USB1]		= "usb1",
+};
+
+struct lpc18xx_pin_caps {
+	unsigned int offset;
+	unsigned char functions[LPC18XX_SCU_FUNC_PER_PIN];
+	unsigned char analog;
+	unsigned char type;
+};
+
+/* Analog pins are required to have both bias and input disabled */
+#define LPC18XX_SCU_ANALOG_PIN_CFG	0x10
+
+/* Macros to maniupluate analog member in lpc18xx_pin_caps */
+#define LPC18XX_ANALOG_PIN		BIT(7)
+#define LPC18XX_ANALOG_ADC(a)		((a >> 5) & 0x3)
+#define LPC18XX_ANALOG_BIT_MASK		0x1f
+#define ADC0				(LPC18XX_ANALOG_PIN | (0x00 << 5))
+#define ADC1				(LPC18XX_ANALOG_PIN | (0x01 << 5))
+#define DAC				LPC18XX_ANALOG_PIN
+
+#define LPC_P(port, pin, f0, f1, f2, f3, f4, f5, f6, f7, a, t)	\
+static struct lpc18xx_pin_caps lpc18xx_pin_p##port##_##pin = {	\
+	.offset = 0x##port * 32 * 4 + pin * 4,			\
+	.functions = {						\
+			FUNC_##f0, FUNC_##f1, FUNC_##f2,	\
+			FUNC_##f3, FUNC_##f4, FUNC_##f5,	\
+			FUNC_##f6, FUNC_##f7,			\
+	},							\
+	.analog = a,						\
+	.type = TYPE_##t,					\
+}
+
+#define LPC_N(pname, off, f0, f1, f2, f3, f4, f5, f6, f7, a, t)	\
+static struct lpc18xx_pin_caps lpc18xx_pin_##pname = {		\
+	.offset = off,						\
+	.functions = {						\
+			FUNC_##f0, FUNC_##f1, FUNC_##f2,	\
+			FUNC_##f3, FUNC_##f4, FUNC_##f5,	\
+			FUNC_##f6, FUNC_##f7,			\
+	},							\
+	.analog = a,						\
+	.type = TYPE_##t,					\
+}
+
+
+/* Pinmuxing table taken from data sheet */
+/*    Pin    FUNC0  FUNC1  FUNC2  FUNC3   FUNC4   FUNC5   FUNC6    FUNC7 ANALOG TYPE */
+LPC_P(0,0,   GPIO,  SSP1,  ENET,  SGPIO,      R,      R, I2S0_TX_WS,I2S1,     0, ND);
+LPC_P(0,1,   GPIO,  SSP1,ENET_ALT,SGPIO,      R,      R,   ENET,    I2S1,     0, ND);
+LPC_P(1,0,   GPIO,  CTIN,   EMC,      R,      R,   SSP0,  SGPIO,       R,     0, ND);
+LPC_P(1,1,   GPIO, CTOUT,   EMC,  SGPIO,      R,   SSP0,      R,       R,     0, ND);
+LPC_P(1,2,   GPIO, CTOUT,   EMC,  SGPIO,      R,   SSP0,      R,       R,     0, ND);
+LPC_P(1,3,   GPIO, CTOUT, SGPIO,    EMC,   USB0,   SSP1,      R,   SDMMC,     0, ND);
+LPC_P(1,4,   GPIO, CTOUT, SGPIO,    EMC,   USB0,   SSP1,      R,   SDMMC,     0, ND);
+LPC_P(1,5,   GPIO, CTOUT,     R,    EMC,   USB0,   SSP1,  SGPIO,   SDMMC,     0, ND);
+LPC_P(1,6,   GPIO,  CTIN,     R,    EMC,      R,      R,  SGPIO,   SDMMC,     0, ND);
+LPC_P(1,7,   GPIO, UART1, CTOUT,    EMC,   USB0,      R,      R,       R,     0, ND);
+LPC_P(1,8,   GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
+LPC_P(1,9,   GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
+LPC_P(1,10,  GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
+LPC_P(1,11,  GPIO, UART1, CTOUT,    EMC,      R,      R,      R,   SDMMC,     0, ND);
+LPC_P(1,12,  GPIO, UART1,     R,    EMC, TIMER0,      R,  SGPIO,   SDMMC,     0, ND);
+LPC_P(1,13,  GPIO, UART1,     R,    EMC, TIMER0,      R,  SGPIO,   SDMMC,     0, ND);
+LPC_P(1,14,  GPIO, UART1,     R,    EMC, TIMER0,      R,  SGPIO,       R,     0, ND);
+LPC_P(1,15,  GPIO, UART2, SGPIO,   ENET, TIMER0,      R,      R,       R,     0, ND);
+LPC_P(1,16,  GPIO, UART2, SGPIO,ENET_ALT,TIMER0,      R,      R,    ENET,     0, ND);
+LPC_P(1,17,  GPIO, UART2,     R,   ENET, TIMER0,   CAN1,  SGPIO,       R,     0, HD);
+LPC_P(1,18,  GPIO, UART2,     R,   ENET, TIMER0,   CAN1,  SGPIO,       R,     0, ND);
+LPC_P(1,19,  ENET,  SSP1,     R,      R, CLKOUT,      R, I2S0_RX_MCLK,I2S1,   0, ND);
+LPC_P(1,20,  GPIO,  SSP1,     R,   ENET, TIMER0,      R,  SGPIO,       R,     0, ND);
+LPC_P(2,0,  SGPIO, UART0,   EMC,   USB0,   GPIO,      R, TIMER3,    ENET,     0, ND);
+LPC_P(2,1,  SGPIO, UART0,   EMC,   USB0,   GPIO,      R, TIMER3,       R,     0, ND);
+LPC_P(2,2,  SGPIO, UART0,   EMC,   USB0,   GPIO,   CTIN, TIMER3,       R,     0, ND);
+LPC_P(2,3,  SGPIO,  I2C1, UART3,   CTIN,   GPIO,      R, TIMER3,    USB0,     0, HD);
+LPC_P(2,4,  SGPIO,  I2C1, UART3,   CTIN,   GPIO,      R, TIMER3,    USB0,     0, HD);
+LPC_P(2,5,  SGPIO,  CTIN,  USB1, ADCTRIG,  GPIO,      R, TIMER3,    USB0,     0, HD);
+LPC_P(2,6,  SGPIO, UART0,   EMC,   USB0,   GPIO,   CTIN, TIMER3,       R,     0, ND);
+LPC_P(2,7,   GPIO, CTOUT, UART3,    EMC,      R,      R, TIMER3,       R,     0, ND);
+LPC_P(2,8,  SGPIO, CTOUT, UART3,    EMC,   GPIO,      R,      R,       R,     0, ND);
+LPC_P(2,9,   GPIO, CTOUT, UART3,    EMC,      R,      R,      R,       R,     0, ND);
+LPC_P(2,10,  GPIO, CTOUT, UART2,    EMC,      R,      R,      R,       R,     0, ND);
+LPC_P(2,11,  GPIO, CTOUT, UART2,    EMC,      R,      R,      R,       R,     0, ND);
+LPC_P(2,12,  GPIO, CTOUT,     R,    EMC,      R,      R,      R,   UART2,     0, ND);
+LPC_P(2,13,  GPIO,  CTIN,     R,    EMC,      R,      R,      R,   UART2,     0, ND);
+LPC_P(3,0,  I2S0_RX_SCK, I2S0_RX_MCLK, I2S0_TX_SCK, I2S0_TX_MCLK,SSP0,R,R,R,  0, ND);
+LPC_P(3,1,  I2S0_TX_WS, I2S0_RX_WS,CAN0,USB1,GPIO,    R,    LCD,       R,     0, ND);
+LPC_P(3,2,  I2S0_TX_SDA, I2S0_RX_SDA,CAN0,USB1,GPIO,  R,    LCD,      R,      0, ND);
+LPC_P(3,3,      R,   SPI,  SSP0,  SPIFI, CGU_OUT,R, I2S0_TX_MCLK,  I2S1,      0, HS);
+LPC_P(3,4,   GPIO,     R,     R,  SPIFI,  UART1, I2S0_TX_WS, I2S1,  LCD,      0, ND);
+LPC_P(3,5,   GPIO,     R,     R,  SPIFI,  UART1, I2S0_TX_SDA,I2S1,  LCD,      0, ND);
+LPC_P(3,6,   GPIO,   SPI,  SSP0,  SPIFI,      R,  SSP0_ALT,   R,      R,      0, ND);
+LPC_P(3,7,      R,   SPI,  SSP0,  SPIFI,   GPIO,  SSP0_ALT,   R,      R,      0, ND);
+LPC_P(3,8,      R,   SPI,  SSP0,  SPIFI,   GPIO,  SSP0_ALT,   R,      R,      0, ND);
+LPC_P(4,0,   GPIO, MCTRL,   NMI,      R,      R,    LCD,  UART3,      R,      0, ND);
+LPC_P(4,1,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,   ENET, ADC0|1, ND);
+LPC_P(4,2,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,  SGPIO,      0, ND);
+LPC_P(4,3,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,  SGPIO, ADC0|0, ND);
+LPC_P(4,4,   GPIO, CTOUT,   LCD,      R,      R, LCD_ALT, UART3,  SGPIO,    DAC, ND);
+LPC_P(4,5,   GPIO, CTOUT,   LCD,      R,      R,      R,      R,  SGPIO,      0, ND);
+LPC_P(4,6,   GPIO, CTOUT,   LCD,      R,      R,      R,      R,  SGPIO,      0, ND);
+LPC_P(4,7,    LCD, CLKIN,     R,      R,      R,      R,   I2S1,I2S0_TX_SCK,  0, ND);
+LPC_P(4,8,      R,  CTIN,   LCD,      R,   GPIO, LCD_ALT,  CAN1,  SGPIO,      0, ND);
+LPC_P(4,9,      R,  CTIN,   LCD,      R,   GPIO, LCD_ALT,  CAN1,  SGPIO,      0, ND);
+LPC_P(4,10,     R,  CTIN,   LCD,      R,   GPIO, LCD_ALT,     R,  SGPIO,      0, ND);
+LPC_P(5,0,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,1,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,2,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,3,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,4,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,5,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,6,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(5,7,   GPIO, MCTRL,   EMC,      R,  UART1, TIMER1,      R,      R,      0, ND);
+LPC_P(6,0,      R, I2S0_RX_MCLK,R,    R, I2S0_RX_SCK, R,      R,      R,      0, ND);
+LPC_P(6,1,   GPIO,   EMC, UART0, I2S0_RX_WS,  R, TIMER2,      R,      R,      0, ND);
+LPC_P(6,2,   GPIO,   EMC, UART0, I2S0_RX_SDA, R, TIMER2,      R,      R,      0, ND);
+LPC_P(6,3,   GPIO,  USB0, SGPIO,    EMC,      R, TIMER2,      R,      R,      0, ND);
+LPC_P(6,4,   GPIO,  CTIN, UART0,    EMC,      R,      R,      R,      R,      0, ND);
+LPC_P(6,5,   GPIO, CTOUT, UART0,    EMC,      R,      R,      R,      R,      0, ND);
+LPC_P(6,6,   GPIO,   EMC, SGPIO,   USB0,      R, TIMER2,      R,      R,      0, ND);
+LPC_P(6,7,      R,   EMC, SGPIO,   USB0,   GPIO, TIMER2,      R,      R,      0, ND);
+LPC_P(6,8,      R,   EMC, SGPIO,   USB0,   GPIO, TIMER2,      R,      R,      0, ND);
+LPC_P(6,9,   GPIO,     R,     R,    EMC,      R, TIMER2,      R,      R,      0, ND);
+LPC_P(6,10,  GPIO, MCTRL,     R,    EMC,      R,      R,      R,      R,      0, ND);
+LPC_P(6,11,  GPIO,     R,     R,    EMC,      R, TIMER2,      R,      R,      0, ND);
+LPC_P(6,12,  GPIO, CTOUT,     R,    EMC,      R,      R,      R,      R,      0, ND);
+LPC_P(7,0,   GPIO, CTOUT,     R,    LCD,      R,      R,      R,  SGPIO,      0, ND);
+LPC_P(7,1,   GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT,      R,  UART2,  SGPIO,      0, ND);
+LPC_P(7,2,   GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT,      R,  UART2,  SGPIO,      0, ND);
+LPC_P(7,3,   GPIO, CTIN,      R,    LCD,LCD_ALT,      R,      R,      R,      0, ND);
+LPC_P(7,4,   GPIO, CTOUT,     R,    LCD,LCD_ALT,  TRACE,      R,      R, ADC0|4, ND);
+LPC_P(7,5,   GPIO, CTOUT,     R,    LCD,LCD_ALT,  TRACE,      R,      R, ADC0|3, ND);
+LPC_P(7,6,   GPIO, CTOUT,     R,    LCD,      R,  TRACE,      R,      R,      0, ND);
+LPC_P(7,7,   GPIO, CTOUT,     R,    LCD,      R,  TRACE,   ENET,  SGPIO, ADC1|6, ND);
+LPC_P(8,0,   GPIO,  USB0,     R,  MCTRL,  SGPIO,      R,      R, TIMER0,      0, HD);
+LPC_P(8,1,   GPIO,  USB0,     R,  MCTRL,  SGPIO,      R,      R, TIMER0,      0, HD);
+LPC_P(8,2,   GPIO,  USB0,     R,  MCTRL,  SGPIO,      R,      R, TIMER0,      0, HD);
+LPC_P(8,3,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
+LPC_P(8,4,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
+LPC_P(8,5,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
+LPC_P(8,6,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
+LPC_P(8,7,   GPIO,  USB1,     R,    LCD, LCD_ALT,     R,      R, TIMER0,      0, ND);
+LPC_P(8,8,      R,  USB1,     R,      R,      R,      R,CGU_OUT,   I2S1,      0, ND);
+LPC_P(9,0,   GPIO, MCTRL,     R,      R,      R,   ENET,  SGPIO,   SSP0,      0, ND);
+LPC_P(9,1,   GPIO, MCTRL,     R,      R, I2S0_TX_WS,ENET, SGPIO,   SSP0,      0, ND);
+LPC_P(9,2,   GPIO, MCTRL,     R,      R, I2S0_TX_SDA,ENET,SGPIO,   SSP0,      0, ND);
+LPC_P(9,3,   GPIO, MCTRL,  USB1,      R,      R,   ENET,  SGPIO,  UART3,      0, ND);
+LPC_P(9,4,      R, MCTRL,  USB1,      R,   GPIO,   ENET,  SGPIO,  UART3,      0, ND);
+LPC_P(9,5,      R, MCTRL,  USB1,      R,   GPIO,   ENET,  SGPIO,  UART0,      0, ND);
+LPC_P(9,6,   GPIO, MCTRL,  USB1,      R,      R,   ENET,  SGPIO,  UART0,      0, ND);
+LPC_P(a,0,      R,     R,     R,      R,      R,   I2S1, CGU_OUT,     R,      0, ND);
+LPC_P(a,1,   GPIO,   QEI,     R,  UART2,      R,      R,      R,      R,      0, HD);
+LPC_P(a,2,   GPIO,   QEI,     R,  UART2,      R,      R,      R,      R,      0, HD);
+LPC_P(a,3,   GPIO,   QEI,     R,      R,      R,      R,      R,      R,      0, HD);
+LPC_P(a,4,      R, CTOUT,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(b,0,      R, CTOUT,   LCD,      R,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(b,1,      R,  USB1,   LCD,      R,   GPIO,  CTOUT,      R,      R,      0, ND);
+LPC_P(b,2,      R,  USB1,   LCD,      R,   GPIO,  CTOUT,      R,      R,      0, ND);
+LPC_P(b,3,      R,  USB1,   LCD,      R,   GPIO,  CTOUT,      R,      R,      0, ND);
+LPC_P(b,4,      R,  USB1,   LCD,      R,   GPIO,   CTIN,      R,      R,      0, ND);
+LPC_P(b,5,      R,  USB1,   LCD,      R,   GPIO,   CTIN, LCD_ALT,     R,      0, ND);
+LPC_P(b,6,      R,  USB1,   LCD,      R,   GPIO,   CTIN, LCD_ALT,     R, ADC0|6, ND);
+LPC_P(c,0,      R,  USB1,     R,   ENET,    LCD,      R,      R,  SDMMC, ADC1|1, ND);
+LPC_P(c,1,   USB1,     R, UART1,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,2,   USB1,     R, UART1,   ENET,   GPIO,      R,      R,  SDMMC,      0, ND);
+LPC_P(c,3,   USB1,     R, UART1,   ENET,   GPIO,      R,      R,  SDMMC, ADC1|0, ND);
+LPC_P(c,4,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,5,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,6,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,7,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,8,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,9,      R,  USB1,     R,   ENET,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,10,     R,  USB1, UART1,      R,   GPIO,      R, TIMER3,  SDMMC,      0, ND);
+LPC_P(c,11,     R,  USB1, UART1,      R,   GPIO,      R,      R,  SDMMC,      0, ND);
+LPC_P(c,12,     R,     R, UART1,      R,   GPIO,  SGPIO, I2S0_TX_SDA,SDMMC,   0, ND);
+LPC_P(c,13,     R,     R, UART1,      R,   GPIO,  SGPIO, I2S0_TX_WS, SDMMC,   0, ND);
+LPC_P(c,14,     R,     R, UART1,      R,   GPIO,  SGPIO,   ENET,  SDMMC,      0, ND);
+LPC_P(d,0,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,1,      R,     R,   EMC,      R,   GPIO,  SDMMC,      R,  SGPIO,      0, ND);
+LPC_P(d,2,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,3,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,4,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,5,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,6,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,7,      R,  CTIN,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,8,      R,  CTIN,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,9,      R, CTOUT,   EMC,      R,   GPIO,      R,      R,  SGPIO,      0, ND);
+LPC_P(d,10,     R,  CTIN,   EMC,      R,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(d,11,     R,     R,   EMC,      R,   GPIO,   USB1,  CTOUT,      R,      0, ND);
+LPC_P(d,12,     R,     R,   EMC,      R,   GPIO,      R,  CTOUT,      R,      0, ND);
+LPC_P(d,13,     R,  CTIN,   EMC,      R,   GPIO,      R,  CTOUT,      R,      0, ND);
+LPC_P(d,14,     R,     R,   EMC,      R,   GPIO,      R,  CTOUT,      R,      0, ND);
+LPC_P(d,15,     R,     R,   EMC,      R,   GPIO,  SDMMC,  CTOUT,      R,      0, ND);
+LPC_P(d,16,     R,     R,   EMC,      R,   GPIO,  SDMMC,  CTOUT,      R,      0, ND);
+LPC_P(e,0,      R,     R,     R,    EMC,   GPIO,   CAN1,      R,      R,      0, ND);
+LPC_P(e,1,      R,     R,     R,    EMC,   GPIO,   CAN1,      R,      R,      0, ND);
+LPC_P(e,2,ADCTRIG,  CAN0,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,3,      R,  CAN0,ADCTRIG,   EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,4,      R,   NMI,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,5,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,6,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,7,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,8,      R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,9,      R,  CTIN, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,10,     R,  CTIN, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,11,     R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,12,     R, CTOUT, UART1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,13,     R, CTOUT,  I2C1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,14,     R,     R,     R,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(e,15,     R, CTOUT,  I2C1,    EMC,   GPIO,      R,      R,      R,      0, ND);
+LPC_P(f,0,   SSP0, CLKIN,     R,      R,      R,      R,      R,   I2S1,      0, ND);
+LPC_P(f,1,      R,     R,  SSP0,      R,   GPIO,      R,  SGPIO,      R,      0, ND);
+LPC_P(f,2,      R, UART3,  SSP0,      R,   GPIO,      R,  SGPIO,      R,      0, ND);
+LPC_P(f,3,      R, UART3,  SSP0,      R,   GPIO,      R,  SGPIO,      R,      0, ND);
+LPC_P(f,4,   SSP1, CLKIN, TRACE,      R,      R, R, I2S0_TX_MCLK,I2S0_RX_SCK, 0, ND);
+LPC_P(f,5,      R, UART3,  SSP1,  TRACE,   GPIO,      R,  SGPIO,      R, ADC1|4, ND);
+LPC_P(f,6,      R, UART3,  SSP1,  TRACE,   GPIO,      R,  SGPIO,   I2S1, ADC1|3, ND);
+LPC_P(f,7,      R, UART3,  SSP1,  TRACE,   GPIO,      R,  SGPIO,   I2S1, ADC1|7, ND);
+LPC_P(f,8,      R, UART0,  CTIN,  TRACE,   GPIO,      R,  SGPIO,      R, ADC0|2, ND);
+LPC_P(f,9,      R, UART0, CTOUT,      R,   GPIO,      R,  SGPIO,      R, ADC1|2, ND);
+LPC_P(f,10,     R, UART0,     R,      R,   GPIO,      R,  SDMMC,      R, ADC0|5, ND);
+LPC_P(f,11,     R, UART0,     R,      R,   GPIO,      R,  SDMMC,      R, ADC1|5, ND);
+
+/*    Pin      Offset FUNC0  FUNC1  FUNC2  FUNC3  FUNC4    FUNC5   FUNC6      FUNC7 ANALOG TYPE */
+LPC_N(clk0,     0xc00, EMC, CLKOUT,   R,     R,  SDMMC,   EMC_ALT,  SSP1,      ENET,  0, HS);
+LPC_N(clk1,     0xc04, EMC, CLKOUT,   R,     R,      R,   CGU_OUT,   R,        I2S1,  0, HS);
+LPC_N(clk2,     0xc08, EMC, CLKOUT,   R,     R,  SDMMC,   EMC_ALT,I2S0_TX_MCLK,I2S1,  0, HS);
+LPC_N(clk3,     0xc0c, EMC, CLKOUT,   R,     R,      R,   CGU_OUT,   R,        I2S1,  0, HS);
+LPC_N(usb1_dm,  0xc80, R,      R,     R,     R,      R,      R,      R,          R,   0, USB1);
+LPC_N(usb1_dp,  0xc80, R,      R,     R,     R,      R,      R,      R,          R,   0, USB1);
+LPC_N(i2c0_scl, 0xc84, R,      R,     R,     R,      R,      R,      R,          R,   0, I2C0);
+LPC_N(i2c0_sda, 0xc84, R,      R,     R,     R,      R,      R,      R,          R,   0, I2C0);
+
+#define LPC18XX_PIN_P(port, pin) {			\
+	.number = 0x##port * 32 + pin,			\
+	.name = "p"#port"_"#pin,			\
+	.drv_data = &lpc18xx_pin_p##port##_##pin 	\
+}
+
+/* Pin numbers for special pins */
+enum {
+	PIN_CLK0 = 600,
+	PIN_CLK1,
+	PIN_CLK2,
+	PIN_CLK3,
+	PIN_USB1_DM,
+	PIN_USB1_DP,
+	PIN_I2C0_SCL,
+	PIN_I2C0_SDA,
+};
+
+#define LPC18XX_PIN(pname, n) {				\
+	.number = n,					\
+	.name = #pname,					\
+	.drv_data = &lpc18xx_pin_##pname 		\
+}
+
+static const struct pinctrl_pin_desc lpc18xx_pins[] = {
+	LPC18XX_PIN_P(0,0),
+	LPC18XX_PIN_P(0,1),
+	LPC18XX_PIN_P(1,0),
+	LPC18XX_PIN_P(1,1),
+	LPC18XX_PIN_P(1,2),
+	LPC18XX_PIN_P(1,3),
+	LPC18XX_PIN_P(1,4),
+	LPC18XX_PIN_P(1,5),
+	LPC18XX_PIN_P(1,6),
+	LPC18XX_PIN_P(1,7),
+	LPC18XX_PIN_P(1,8),
+	LPC18XX_PIN_P(1,9),
+	LPC18XX_PIN_P(1,10),
+	LPC18XX_PIN_P(1,11),
+	LPC18XX_PIN_P(1,12),
+	LPC18XX_PIN_P(1,13),
+	LPC18XX_PIN_P(1,14),
+	LPC18XX_PIN_P(1,15),
+	LPC18XX_PIN_P(1,16),
+	LPC18XX_PIN_P(1,17),
+	LPC18XX_PIN_P(1,18),
+	LPC18XX_PIN_P(1,19),
+	LPC18XX_PIN_P(1,20),
+	LPC18XX_PIN_P(2,0),
+	LPC18XX_PIN_P(2,1),
+	LPC18XX_PIN_P(2,2),
+	LPC18XX_PIN_P(2,3),
+	LPC18XX_PIN_P(2,4),
+	LPC18XX_PIN_P(2,5),
+	LPC18XX_PIN_P(2,6),
+	LPC18XX_PIN_P(2,7),
+	LPC18XX_PIN_P(2,8),
+	LPC18XX_PIN_P(2,9),
+	LPC18XX_PIN_P(2,10),
+	LPC18XX_PIN_P(2,11),
+	LPC18XX_PIN_P(2,12),
+	LPC18XX_PIN_P(2,13),
+	LPC18XX_PIN_P(3,0),
+	LPC18XX_PIN_P(3,1),
+	LPC18XX_PIN_P(3,2),
+	LPC18XX_PIN_P(3,3),
+	LPC18XX_PIN_P(3,4),
+	LPC18XX_PIN_P(3,5),
+	LPC18XX_PIN_P(3,6),
+	LPC18XX_PIN_P(3,7),
+	LPC18XX_PIN_P(3,8),
+	LPC18XX_PIN_P(4,0),
+	LPC18XX_PIN_P(4,1),
+	LPC18XX_PIN_P(4,2),
+	LPC18XX_PIN_P(4,3),
+	LPC18XX_PIN_P(4,4),
+	LPC18XX_PIN_P(4,5),
+	LPC18XX_PIN_P(4,6),
+	LPC18XX_PIN_P(4,7),
+	LPC18XX_PIN_P(4,8),
+	LPC18XX_PIN_P(4,9),
+	LPC18XX_PIN_P(4,10),
+	LPC18XX_PIN_P(5,0),
+	LPC18XX_PIN_P(5,1),
+	LPC18XX_PIN_P(5,2),
+	LPC18XX_PIN_P(5,3),
+	LPC18XX_PIN_P(5,4),
+	LPC18XX_PIN_P(5,5),
+	LPC18XX_PIN_P(5,6),
+	LPC18XX_PIN_P(5,7),
+	LPC18XX_PIN_P(6,0),
+	LPC18XX_PIN_P(6,1),
+	LPC18XX_PIN_P(6,2),
+	LPC18XX_PIN_P(6,3),
+	LPC18XX_PIN_P(6,4),
+	LPC18XX_PIN_P(6,5),
+	LPC18XX_PIN_P(6,6),
+	LPC18XX_PIN_P(6,7),
+	LPC18XX_PIN_P(6,8),
+	LPC18XX_PIN_P(6,9),
+	LPC18XX_PIN_P(6,10),
+	LPC18XX_PIN_P(6,11),
+	LPC18XX_PIN_P(6,12),
+	LPC18XX_PIN_P(7,0),
+	LPC18XX_PIN_P(7,1),
+	LPC18XX_PIN_P(7,2),
+	LPC18XX_PIN_P(7,3),
+	LPC18XX_PIN_P(7,4),
+	LPC18XX_PIN_P(7,5),
+	LPC18XX_PIN_P(7,6),
+	LPC18XX_PIN_P(7,7),
+	LPC18XX_PIN_P(8,0),
+	LPC18XX_PIN_P(8,1),
+	LPC18XX_PIN_P(8,2),
+	LPC18XX_PIN_P(8,3),
+	LPC18XX_PIN_P(8,4),
+	LPC18XX_PIN_P(8,5),
+	LPC18XX_PIN_P(8,6),
+	LPC18XX_PIN_P(8,7),
+	LPC18XX_PIN_P(8,8),
+	LPC18XX_PIN_P(9,0),
+	LPC18XX_PIN_P(9,1),
+	LPC18XX_PIN_P(9,2),
+	LPC18XX_PIN_P(9,3),
+	LPC18XX_PIN_P(9,4),
+	LPC18XX_PIN_P(9,5),
+	LPC18XX_PIN_P(9,6),
+	LPC18XX_PIN_P(a,0),
+	LPC18XX_PIN_P(a,1),
+	LPC18XX_PIN_P(a,2),
+	LPC18XX_PIN_P(a,3),
+	LPC18XX_PIN_P(a,4),
+	LPC18XX_PIN_P(b,0),
+	LPC18XX_PIN_P(b,1),
+	LPC18XX_PIN_P(b,2),
+	LPC18XX_PIN_P(b,3),
+	LPC18XX_PIN_P(b,4),
+	LPC18XX_PIN_P(b,5),
+	LPC18XX_PIN_P(b,6),
+	LPC18XX_PIN_P(c,0),
+	LPC18XX_PIN_P(c,1),
+	LPC18XX_PIN_P(c,2),
+	LPC18XX_PIN_P(c,3),
+	LPC18XX_PIN_P(c,4),
+	LPC18XX_PIN_P(c,5),
+	LPC18XX_PIN_P(c,6),
+	LPC18XX_PIN_P(c,7),
+	LPC18XX_PIN_P(c,8),
+	LPC18XX_PIN_P(c,9),
+	LPC18XX_PIN_P(c,10),
+	LPC18XX_PIN_P(c,11),
+	LPC18XX_PIN_P(c,12),
+	LPC18XX_PIN_P(c,13),
+	LPC18XX_PIN_P(c,14),
+	LPC18XX_PIN_P(d,0),
+	LPC18XX_PIN_P(d,1),
+	LPC18XX_PIN_P(d,2),
+	LPC18XX_PIN_P(d,3),
+	LPC18XX_PIN_P(d,4),
+	LPC18XX_PIN_P(d,5),
+	LPC18XX_PIN_P(d,6),
+	LPC18XX_PIN_P(d,7),
+	LPC18XX_PIN_P(d,8),
+	LPC18XX_PIN_P(d,9),
+	LPC18XX_PIN_P(d,10),
+	LPC18XX_PIN_P(d,11),
+	LPC18XX_PIN_P(d,12),
+	LPC18XX_PIN_P(d,13),
+	LPC18XX_PIN_P(d,14),
+	LPC18XX_PIN_P(d,15),
+	LPC18XX_PIN_P(d,16),
+	LPC18XX_PIN_P(e,0),
+	LPC18XX_PIN_P(e,1),
+	LPC18XX_PIN_P(e,2),
+	LPC18XX_PIN_P(e,3),
+	LPC18XX_PIN_P(e,4),
+	LPC18XX_PIN_P(e,5),
+	LPC18XX_PIN_P(e,6),
+	LPC18XX_PIN_P(e,7),
+	LPC18XX_PIN_P(e,8),
+	LPC18XX_PIN_P(e,9),
+	LPC18XX_PIN_P(e,10),
+	LPC18XX_PIN_P(e,11),
+	LPC18XX_PIN_P(e,12),
+	LPC18XX_PIN_P(e,13),
+	LPC18XX_PIN_P(e,14),
+	LPC18XX_PIN_P(e,15),
+	LPC18XX_PIN_P(f,0),
+	LPC18XX_PIN_P(f,1),
+	LPC18XX_PIN_P(f,2),
+	LPC18XX_PIN_P(f,3),
+	LPC18XX_PIN_P(f,4),
+	LPC18XX_PIN_P(f,5),
+	LPC18XX_PIN_P(f,6),
+	LPC18XX_PIN_P(f,7),
+	LPC18XX_PIN_P(f,8),
+	LPC18XX_PIN_P(f,9),
+	LPC18XX_PIN_P(f,10),
+	LPC18XX_PIN_P(f,11),
+
+	LPC18XX_PIN(clk0, PIN_CLK0),
+	LPC18XX_PIN(clk1, PIN_CLK1),
+	LPC18XX_PIN(clk2, PIN_CLK2),
+	LPC18XX_PIN(clk3, PIN_CLK3),
+	LPC18XX_PIN(usb1_dm,  PIN_USB1_DM),
+	LPC18XX_PIN(usb1_dp,  PIN_USB1_DP),
+	LPC18XX_PIN(i2c0_scl, PIN_I2C0_SCL),
+	LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA),
+};
+
+static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg)
+{
+	/* TODO */
+	return -ENOTSUPP;
+}
+
+static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg,
+				  unsigned pin)
+{
+	u8 shift;
+
+	if (pin == PIN_I2C0_SCL)
+		shift = LPC18XX_SCU_I2C0_SCL_SHIFT;
+	else
+		shift = LPC18XX_SCU_I2C0_SDA_SHIFT;
+
+	switch (param) {
+	case PIN_CONFIG_INPUT_ENABLE:
+		if (reg & (LPC18XX_SCU_I2C0_EZI << shift))
+			*arg = 1;
+		else
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_SLEW_RATE:
+		if (reg & (LPC18XX_SCU_I2C0_EHD << shift))
+			*arg = 1;
+		else
+			*arg = 0;
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT:
+		if (reg & (LPC18XX_SCU_I2C0_EFP << shift))
+			*arg = 3;
+		else
+			*arg = 50;
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		if (reg & (LPC18XX_SCU_I2C0_ZIF << shift))
+			return -EINVAL;
+		else
+			*arg = 1;
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int lpc18xx_pconf_get_pin(enum pin_config_param param, int *arg, u32 reg,
+				 struct lpc18xx_pin_caps *pin_cap)
+{
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		if ((!(reg & LPC18XX_SCU_PIN_EPD)) && (reg & LPC18XX_SCU_PIN_EPUN))
+			;
+		else
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (reg & LPC18XX_SCU_PIN_EPUN)
+			return -EINVAL;
+		else
+			*arg = 1;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		if (reg & LPC18XX_SCU_PIN_EPD)
+			*arg = 1;
+		else
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_INPUT_ENABLE:
+		if (reg & LPC18XX_SCU_PIN_EZI)
+			*arg = 1;
+		else
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_SLEW_RATE:
+		if (pin_cap->type == TYPE_HD)
+			return -ENOTSUPP;
+
+		if (reg & LPC18XX_SCU_PIN_EHS)
+			*arg = 1;
+		else
+			*arg = 0;
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		if (reg & LPC18XX_SCU_PIN_ZIF)
+			return -EINVAL;
+		else
+			*arg = 1;
+		break;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		if (pin_cap->type != TYPE_HD)
+			return -ENOTSUPP;
+
+		*arg = (reg & LPC18XX_SCU_PIN_EHD_MASK) >> LPC18XX_SCU_PIN_EHD_POS;
+		switch (*arg) {
+		case 3: *arg += 5;
+		case 2: *arg += 5;
+		case 1: *arg += 3;
+		case 0: *arg += 4;
+		}
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int lpc18xx_pconf_get(struct pinctrl_dev *pctldev, unsigned pin,
+			     unsigned long *config)
+{
+	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	struct lpc18xx_pin_caps *pin_cap;
+	int ret, arg = 0;
+	u32 reg;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) {
+		if (lpc18xx_pins[i].number == pin)
+			pin = i;
+	}
+
+	pin_cap = lpc18xx_pins[pin].drv_data;
+	reg = readl(scu->base + pin_cap->offset);
+
+	if (pin_cap->type == TYPE_I2C0)
+		ret = lpc18xx_pconf_get_i2c0(param, &arg, reg, pin);
+	else if (pin_cap->type == TYPE_USB1)
+		ret = lpc18xx_pconf_get_usb1(param, &arg, reg);
+	else
+		ret = lpc18xx_pconf_get_pin(param, &arg, reg, pin_cap);
+
+	if (ret < 0)
+		return ret;
+
+	*config = pinconf_to_config_packed(param, (u16)arg);
+
+	return 0;
+}
+
+static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev,
+				  enum pin_config_param param,
+				  u16 param_val, u32 *reg)
+{
+	/* TODO */
+	return -ENOTSUPP;
+}
+
+static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev,
+				  enum pin_config_param param,
+				  u16 param_val, u32 *reg,
+				  unsigned pin)
+{
+	u8 shift;
+
+	if (pin == PIN_I2C0_SCL)
+		shift = LPC18XX_SCU_I2C0_SCL_SHIFT;
+	else
+		shift = LPC18XX_SCU_I2C0_SDA_SHIFT;
+
+	switch (param) {
+	case PIN_CONFIG_INPUT_ENABLE:
+		if (param_val)
+			*reg |= (LPC18XX_SCU_I2C0_EZI << shift);
+		else
+			*reg &= ~(LPC18XX_SCU_I2C0_EZI << shift);
+		break;
+
+	case PIN_CONFIG_SLEW_RATE:
+		if (param_val)
+			*reg |= (LPC18XX_SCU_I2C0_EHD << shift);
+		else
+			*reg &= ~(LPC18XX_SCU_I2C0_EHD << shift);
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT:
+		if (param_val == 3)
+			*reg |= (LPC18XX_SCU_I2C0_EFP << shift);
+		else if (param_val == 50)
+			*reg &= ~(LPC18XX_SCU_I2C0_EFP << shift);
+		else
+			return -ENOTSUPP;
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		if (param)
+			*reg &= ~(LPC18XX_SCU_I2C0_ZIF << shift);
+		else
+			*reg |= (LPC18XX_SCU_I2C0_ZIF << shift);
+		break;
+
+	default:
+		dev_err(pctldev->dev, "Property not supported\n");
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int lpc18xx_pconf_set_pin(struct pinctrl_dev *pctldev,
+				 enum pin_config_param param,
+				 u16 param_val, u32 *reg,
+				 struct lpc18xx_pin_caps *pin_cap)
+{
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		*reg &= ~LPC18XX_SCU_PIN_EPD;
+		*reg |= LPC18XX_SCU_PIN_EPUN;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*reg &= ~LPC18XX_SCU_PIN_EPUN;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*reg |= LPC18XX_SCU_PIN_EPD;
+		break;
+
+	case PIN_CONFIG_INPUT_ENABLE:
+		if (param_val)
+			*reg |= LPC18XX_SCU_PIN_EZI;
+		else
+			*reg &= ~LPC18XX_SCU_PIN_EZI;
+		break;
+
+	case PIN_CONFIG_SLEW_RATE:
+		if (pin_cap->type == TYPE_HD) {
+			dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n");
+			return -ENOTSUPP;
+		}
+
+		if (param_val == 0)
+			*reg &= ~LPC18XX_SCU_PIN_EHS;
+		else
+			*reg |= LPC18XX_SCU_PIN_EHS;
+		break;
+
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		if (param)
+			*reg &= ~LPC18XX_SCU_PIN_ZIF;
+		else
+			*reg |= LPC18XX_SCU_PIN_ZIF;
+		break;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		if (pin_cap->type != TYPE_HD) {
+			dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n");
+			return -ENOTSUPP;
+		}
+		*reg &= ~LPC18XX_SCU_PIN_EHD_MASK;
+
+		switch (param_val) {
+		case 20: param_val -= 5;
+		case 14: param_val -= 5;
+		case  8: param_val -= 3;
+		case  4: param_val -= 4;
+			 break;
+		default:
+			dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val);
+			return -ENOTSUPP;
+		}
+		*reg |= param_val << LPC18XX_SCU_PIN_EHD_POS;
+		break;
+
+	default:
+		dev_err(pctldev->dev, "Property not supported\n");
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int lpc18xx_pconf_set(struct pinctrl_dev *pctldev, unsigned pin,
+			     unsigned long *configs, unsigned num_configs)
+{
+	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
+	struct lpc18xx_pin_caps *pin_cap;
+	enum pin_config_param param;
+	u16 param_val;
+	u32 reg;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) {
+		if (lpc18xx_pins[i].number == pin)
+			break;
+	}
+
+	pin_cap = lpc18xx_pins[i].drv_data;
+	reg = readl(scu->base + pin_cap->offset);
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		param_val = pinconf_to_config_argument(configs[i]);
+
+		if (pin_cap->type == TYPE_I2C0)
+			ret = lpc18xx_pconf_set_i2c0(pctldev, param, param_val, &reg, pin);
+		else if (pin_cap->type == TYPE_USB1)
+			ret = lpc18xx_pconf_set_usb1(pctldev, param, param_val, &reg);
+		else
+			ret = lpc18xx_pconf_set_pin(pctldev, param, param_val, &reg, pin_cap);
+
+		if (ret)
+			return ret;
+	}
+
+	writel(reg, scu->base + pin_cap->offset);
+
+	return 0;
+}
+
+static const struct pinconf_ops lpc18xx_pconf_ops = {
+	.is_generic	= true,
+	.pin_config_get	= lpc18xx_pconf_get,
+	.pin_config_set	= lpc18xx_pconf_set,
+};
+
+static int lpc18xx_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(lpc18xx_function_names);
+}
+
+static const char *lpc18xx_pmx_get_func_name(struct pinctrl_dev *pctldev,
+					     unsigned function)
+{
+	return lpc18xx_function_names[function];
+}
+
+static int lpc18xx_pmx_get_func_groups(struct pinctrl_dev *pctldev,
+				       unsigned function,
+				       const char *const **groups,
+				       unsigned *const num_groups)
+{
+	return 0;
+}
+
+static int lpc18xx_pmx_set(struct pinctrl_dev *pctldev, unsigned function,
+			   unsigned group)
+{
+	struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev);
+	struct lpc18xx_pin_caps *pin = lpc18xx_pins[group].drv_data;
+	int func;
+	u32 reg;
+
+	/* Dedicated USB1 and I2C0 pins doesn't support muxing */
+	if (pin->type == TYPE_USB1) {
+		if (function == FUNC_USB1)
+			return 0;
+
+		goto fail;
+	}
+
+	if (pin->type == TYPE_I2C0) {
+		if (function == FUNC_I2C0)
+			return 0;
+
+		goto fail;
+	}
+
+	if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) {
+		u32 offset;
+
+		writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset);
+
+		if (LPC18XX_ANALOG_ADC(pin->analog) == 0)
+			offset = LPC18XX_SCU_REG_ENAIO0;
+		else
+			offset = LPC18XX_SCU_REG_ENAIO1;
+
+		reg = readl(scu->base + offset);
+		reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK;
+		writel(reg, scu->base + offset);
+
+		return 0;
+	}
+
+	if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) {
+		writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset);
+
+		reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2);
+		reg |= LPC18XX_SCU_REG_ENAIO2_DAC;
+		writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2);
+
+		return 0;
+	}
+
+	for (func = 0; func < LPC18XX_SCU_FUNC_PER_PIN; func++) {
+		if (function == pin->functions[func])
+			break;
+	}
+
+	if (func >= LPC18XX_SCU_FUNC_PER_PIN)
+		goto fail;
+
+	reg = readl(scu->base + pin->offset);
+	reg &= ~LPC18XX_SCU_PIN_MODE_MASK;
+	writel(reg | func, scu->base + pin->offset);
+
+	return 0;
+fail:
+	dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name,
+						      lpc18xx_function_names[function]);
+	return -EINVAL;
+}
+
+static const struct pinmux_ops lpc18xx_pmx_ops = {
+	.get_functions_count	= lpc18xx_pmx_get_funcs_count,
+	.get_function_name	= lpc18xx_pmx_get_func_name,
+	.get_function_groups	= lpc18xx_pmx_get_func_groups,
+	.set_mux		= lpc18xx_pmx_set,
+};
+
+static int lpc18xx_pctl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(lpc18xx_pins);
+}
+
+static const char *lpc18xx_pctl_get_group_name(struct pinctrl_dev *pctldev,
+					       unsigned group)
+{
+	return lpc18xx_pins[group].name;
+}
+
+static int lpc18xx_pctl_get_group_pins(struct pinctrl_dev *pctldev,
+				       unsigned group,
+				       const unsigned **pins,
+				       unsigned *num_pins)
+{
+	*pins = &lpc18xx_pins[group].number;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static const struct pinctrl_ops lpc18xx_pctl_ops = {
+	.get_groups_count	= lpc18xx_pctl_get_groups_count,
+	.get_group_name		= lpc18xx_pctl_get_group_name,
+	.get_group_pins		= lpc18xx_pctl_get_group_pins,
+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map		= pinctrl_utils_dt_free_map,
+};
+
+static struct pinctrl_desc lpc18xx_scu_desc = {
+	.name = "lpc18xx/43xx-scu",
+	.pins = lpc18xx_pins,
+	.npins = ARRAY_SIZE(lpc18xx_pins),
+	.pctlops = &lpc18xx_pctl_ops,
+	.pmxops = &lpc18xx_pmx_ops,
+	.confops = &lpc18xx_pconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static int lpc18xx_scu_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_scu_data *scu;
+	struct resource *res;
+	int ret;
+
+	scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL);
+	if (!scu)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	scu->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(scu->base))
+		return PTR_ERR(scu->base);
+
+	scu->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(scu->clk)) {
+		dev_err(&pdev->dev, "Input clock not found.\n");
+		return PTR_ERR(scu->clk);
+	}
+
+	ret = clk_prepare_enable(scu->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, scu);
+
+	scu->pctl = pinctrl_register(&lpc18xx_scu_desc, &pdev->dev, scu);
+	if (!scu->pctl) {
+		dev_err(&pdev->dev, "Could not register pinctrl driver\n");
+		clk_disable_unprepare(scu->clk);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lpc18xx_scu_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_scu_data *scu = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(scu->pctl);
+	clk_disable_unprepare(scu->clk);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_scu_match[] = {
+	{ .compatible = "nxp,lpc1850-scu" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_scu_match);
+
+static struct platform_driver lpc18xx_scu_driver = {
+	.probe		= lpc18xx_scu_probe,
+	.remove		= lpc18xx_scu_remove,
+	.driver = {
+		.name		= "lpc18xx-scu",
+		.of_match_table	= lpc18xx_scu_match,
+	},
+};
+module_platform_driver(lpc18xx_scu_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Pinctrl driver for NXP LPC18xx/43xx SCU");
+MODULE_LICENSE("GPL v2");