Merge branch 'r8152-fix-autosuspend'

Hayes Wang says:

====================
r8152: fix autosuspend issue

Avoid rx is split into two parts when runtime suspend occurs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/r8152.c

@@ -3576,39 +3576,87 @@ static bool delay_autosuspend(struct r8152 *tp)
 		return false;
 }
 
-static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+static int rtl8152_rumtime_suspend(struct r8152 *tp)
 {
-	struct r8152 *tp = usb_get_intfdata(intf);
 	struct net_device *netdev = tp->netdev;
 	int ret = 0;
 
-	mutex_lock(&tp->control);
+	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
+		u32 rcr = 0;
 
-	if (PMSG_IS_AUTO(message)) {
-		if (netif_running(netdev) && delay_autosuspend(tp)) {
+		if (delay_autosuspend(tp)) {
 			ret = -EBUSY;
 			goto out1;
 		}
 
-		set_bit(SELECTIVE_SUSPEND, &tp->flags);
-	} else {
-		netif_device_detach(netdev);
+		if (netif_carrier_ok(netdev)) {
+			u32 ocp_data;
+
+			rcr = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+			ocp_data = rcr & ~RCR_ACPT_ALL;
+			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+			rxdy_gated_en(tp, true);
+			ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA,
+						 PLA_OOB_CTRL);
+			if (!(ocp_data & RXFIFO_EMPTY)) {
+				rxdy_gated_en(tp, false);
+				ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+				ret = -EBUSY;
+				goto out1;
+			}
+		}
+
+		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
+
+		tp->rtl_ops.autosuspend_en(tp, true);
+
+		if (netif_carrier_ok(netdev)) {
+			napi_disable(&tp->napi);
+			rtl_stop_rx(tp);
+			rxdy_gated_en(tp, false);
+			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+			napi_enable(&tp->napi);
+		}
 	}
 
+	set_bit(SELECTIVE_SUSPEND, &tp->flags);
+
+out1:
+	return ret;
+}
+
+static int rtl8152_system_suspend(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	int ret = 0;
+
+	netif_device_detach(netdev);
+
 	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
 		clear_bit(WORK_ENABLE, &tp->flags);
 		usb_kill_urb(tp->intr_urb);
 		napi_disable(&tp->napi);
-		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
-			rtl_stop_rx(tp);
-			tp->rtl_ops.autosuspend_en(tp, true);
-		} else {
-			cancel_delayed_work_sync(&tp->schedule);
-			tp->rtl_ops.down(tp);
-		}
+		cancel_delayed_work_sync(&tp->schedule);
+		tp->rtl_ops.down(tp);
 		napi_enable(&tp->napi);
 	}
-out1:
+
+	return ret;
+}
+
+static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	int ret;
+
+	mutex_lock(&tp->control);
+
+	if (PMSG_IS_AUTO(message))
+		ret = rtl8152_rumtime_suspend(tp);
+	else
+		ret = rtl8152_system_suspend(tp);
+
 	mutex_unlock(&tp->control);
 
 	return ret;