net: piggy back on the memory barrier in bql when waking queues

Drivers call netdev_tx_completed_queue() right before
netif_txq_maybe_wake(). If BQL is enabled netdev_tx_completed_queue()
should issue a memory barrier, so we can depend on that separating
the stop check from the consumer index update, instead of adding
another barrier in netif_txq_maybe_wake().

This matters more than the barriers on the xmit path, because
the wake condition is almost always true. So we issue the
consumer side barrier often.

Wrap netdev_tx_completed_queue() in a local helper to issue
the barrier even if BQL is disabled. Keep the same semantics
as netdev_tx_completed_queue() (barrier only if bytes != 0)
to make it clear that the barrier is conditional.

Plus since macro gets pkt/byte counts as arguments now -
we can skip waking if there were no packets completed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/broadcom/bnxt/bnxt.c

@@ -688,10 +688,10 @@ static void bnxt_tx_int(struct bnxt *bp, struct bnxt_napi *bnapi, int nr_pkts)
 		dev_kfree_skb_any(skb);
 	}
 
-	netdev_tx_completed_queue(txq, nr_pkts, tx_bytes);
 	txr->tx_cons = cons;
 
-	__netif_txq_maybe_wake(txq, bnxt_tx_avail(bp, txr), bp->tx_wake_thresh,
+	__netif_txq_completed_wake(txq, nr_pkts, tx_bytes,
+				   bnxt_tx_avail(bp, txr), bp->tx_wake_thresh,
 				   READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING);
 }
 

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -1251,14 +1251,12 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 	if (ring_is_xdp(tx_ring))
 		return !!budget;
 
-	netdev_tx_completed_queue(txring_txq(tx_ring),
-				  total_packets, total_bytes);
-
 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
 	txq = netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index);
-	if (total_packets && netif_carrier_ok(tx_ring->netdev) &&
-	    !__netif_txq_maybe_wake(txq, ixgbe_desc_unused(tx_ring),
+	if (!__netif_txq_completed_wake(txq, total_packets, total_bytes,
+					ixgbe_desc_unused(tx_ring),
 					TX_WAKE_THRESHOLD,
+					netif_carrier_ok(tx_ring->netdev) &&
 					test_bit(__IXGBE_DOWN, &adapter->state)))
 		++tx_ring->tx_stats.restart_queue;
 

include/linux/netdevice.h

@@ -3532,7 +3532,7 @@ static inline void netdev_tx_completed_queue(struct netdev_queue *dev_queue,
 	 * netdev_tx_sent_queue will miss the update and cause the queue to
 	 * be stopped forever
 	 */
-	smp_mb();
+	smp_mb(); /* NOTE: netdev_txq_completed_mb() assumes this exists */
 
 	if (unlikely(dql_avail(&dev_queue->dql) < 0))
 		return;

include/net/netdev_queues.h

@@ -38,7 +38,7 @@
 		netif_tx_stop_queue(txq);				\
 		/* Producer index and stop bit must be visible		\
 		 * to consumer before we recheck.			\
-		 * Pairs with a barrier in __netif_txq_maybe_wake().	\
+		 * Pairs with a barrier in __netif_txq_completed_wake(). \
 		 */							\
 		smp_mb__after_atomic();					\
 									\
@@ -82,10 +82,24 @@
 		_res;							\
 	})								\
 
+/* Variant of netdev_tx_completed_queue() which guarantees smp_mb() if
+ * @bytes != 0, regardless of kernel config.
+ */
+static inline void
+netdev_txq_completed_mb(struct netdev_queue *dev_queue,
+			unsigned int pkts, unsigned int bytes)
+{
+	if (IS_ENABLED(CONFIG_BQL))
+		netdev_tx_completed_queue(dev_queue, pkts, bytes);
+	else if (bytes)
+		smp_mb();
+}
 
 /**
- * __netif_txq_maybe_wake() - locklessly wake a Tx queue, if needed
+ * __netif_txq_completed_wake() - locklessly wake a Tx queue, if needed
  * @txq:	struct netdev_queue to stop/start
+ * @pkts:	number of packets completed
+ * @bytes:	number of bytes completed
  * @get_desc:	get current number of free descriptors (see requirements below!)
  * @start_thrs:	minimal number of descriptors to re-enable the queue
  * @down_cond:	down condition, predicate indicating that the queue should
@@ -94,22 +108,27 @@
  * All arguments may be evaluated multiple times.
  * @get_desc must be a formula or a function call, it must always
  * return up-to-date information when evaluated!
+ * Reports completed pkts/bytes to BQL.
  *
  * Returns:
  *	 0 if the queue was woken up
  *	 1 if the queue was already enabled (or disabled but @down_cond is true)
  *	-1 if the queue was left unchanged (@start_thrs not reached)
  */
-#define __netif_txq_maybe_wake(txq, get_desc, start_thrs, down_cond)	\
+#define __netif_txq_completed_wake(txq, pkts, bytes,			\
+				   get_desc, start_thrs, down_cond)	\
 	({								\
 		int _res;						\
 									\
-		_res = -1;						\
-		if (likely(get_desc > start_thrs)) {			\
-			/* Make sure that anybody stopping the queue after \
-			 * this sees the new next_to_clean.		\
+		/* Report to BQL and piggy back on its barrier.		\
+		 * Barrier makes sure that anybody stopping the queue	\
+		 * after this point sees the new consumer index.	\
+		 * Pairs with barrier in netif_txq_try_stop().		\
 		 */							\
-			smp_mb();					\
+		netdev_txq_completed_mb(txq, pkts, bytes);		\
+									\
+		_res = -1;						\
+		if (pkts && likely(get_desc > start_thrs)) {		\
 			_res = 1;					\
 			if (unlikely(netif_tx_queue_stopped(txq)) &&	\
 			    !(down_cond)) {				\
@@ -120,8 +139,8 @@
 		_res;							\
 	})
 
-#define netif_txq_maybe_wake(txq, get_desc, start_thrs)		\
-	__netif_txq_maybe_wake(txq, get_desc, start_thrs, false)
+#define netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs) \
+	__netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs, false)
 
 /* subqueue variants follow */