Commit 30bb75d7 authored by Michal Malý's avatar Michal Malý Committed by Jiri Kosina

HID: lg4ff - Add range setting support and sysfs interface

Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force
Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25
and G27 all use a common command, DFP uses another one.  Range can be set from
userspace by writing to
"/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list
to store range of each connected wheel; it's not possible to use driver_data in
hid_device struct as it's already b hig-lg driver.
Signed-off-by: default avatarMichal Malý <madcatxster@gmail.com>
Signed-off-by: default avatarSimon Wood <simon@mungewell.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 96440c8a
......@@ -406,6 +406,15 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
return ret;
}
static void lg_remove(struct hid_device *hdev)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
if(quirks & LG_FF4)
lg4ff_deinit(hdev);
hid_hw_stop(hdev);
}
static const struct hid_device_id lg_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
.driver_data = LG_RDESC | LG_WIRELESS },
......@@ -481,6 +490,7 @@ static struct hid_driver lg_driver = {
.input_mapped = lg_input_mapped,
.event = lg_event,
.probe = lg_probe,
.remove = lg_remove,
};
static int __init lg_init(void)
......
......@@ -21,8 +21,10 @@ static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
#ifdef CONFIG_LOGIWII_FF
int lg4ff_init(struct hid_device *hdev);
int lg4ff_deinit(struct hid_device *hdev);
#else
static inline int lg4ff_init(struct hid_device *hdev) { return -1; }
static inline int lg4ff_deinit(struct hid_device *hdev) { return -1; }
#endif
#endif
......@@ -42,6 +42,29 @@
#define G27_REV_MAJ 0x12
#define G27_REV_MIN 0x38
#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range);
static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range);
static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf);
static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count);
static DEVICE_ATTR(range, S_IRWXU | S_IRWXG | S_IRWXO, lg4ff_range_show, lg4ff_range_store);
static bool list_inited;
struct lg4ff_device_entry {
char *device_id; /* Use name in respective kobject structure's address as the ID */
__u16 range;
__u16 min_range;
__u16 max_range;
__u8 leds;
struct list_head list;
void (*set_range)(struct hid_device *hid, u16 range);
};
static struct lg4ff_device_entry device_list;
static const signed short lg4ff_wheel_effects[] = {
FF_CONSTANT,
FF_AUTOCENTER,
......@@ -53,17 +76,18 @@ struct lg4ff_wheel {
const signed short *ff_effects;
const __u16 min_range;
const __u16 max_range;
void (*set_range)(struct hid_device *hid, u16 range);
};
static const struct lg4ff_wheel lg4ff_devices[] = {
{USB_DEVICE_ID_LOGITECH_WHEEL, lg4ff_wheel_effects, 40, 270},
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL, lg4ff_wheel_effects, 40, 270},
{USB_DEVICE_ID_LOGITECH_DFP_WHEEL, lg4ff_wheel_effects, 40, 900},
{USB_DEVICE_ID_LOGITECH_G25_WHEEL, lg4ff_wheel_effects, 40, 900},
{USB_DEVICE_ID_LOGITECH_DFGT_WHEEL, lg4ff_wheel_effects, 40, 900},
{USB_DEVICE_ID_LOGITECH_G27_WHEEL, lg4ff_wheel_effects, 40, 900},
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270},
{USB_DEVICE_ID_LOGITECH_WII_WHEEL, lg4ff_wheel_effects, 40, 270}
{USB_DEVICE_ID_LOGITECH_WHEEL, lg4ff_wheel_effects, 40, 270, NULL},
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL, lg4ff_wheel_effects, 40, 270, NULL},
{USB_DEVICE_ID_LOGITECH_DFP_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_dfp},
{USB_DEVICE_ID_LOGITECH_G25_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
{USB_DEVICE_ID_LOGITECH_DFGT_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
{USB_DEVICE_ID_LOGITECH_G27_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270, NULL},
{USB_DEVICE_ID_LOGITECH_WII_WHEEL, lg4ff_wheel_effects, 40, 270, NULL}
};
struct lg4ff_native_cmd {
......@@ -106,8 +130,7 @@ static const struct lg4ff_usb_revision lg4ff_revs[] = {
{G27_REV_MAJ, G27_REV_MIN, &native_g27}, /* G27 */
};
static int hid_lg4ff_play(struct input_dev *dev, void *data,
struct ff_effect *effect)
static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
{
struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
......@@ -151,6 +174,77 @@ static void hid_lg4ff_set_autocenter(struct input_dev *dev, u16 magnitude)
usbhid_submit_report(hid, report, USB_DIR_OUT);
}
/* Sends command to set range compatible with G25/G27/Driving Force GT */
static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range)
{
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
dbg_hid("G25/G27/DFGT: setting range to %u\n", range);
report->field[0]->value[0] = 0xf8;
report->field[0]->value[1] = 0x81;
report->field[0]->value[2] = range & 0x00ff;
report->field[0]->value[3] = (range & 0xff00) >> 8;
report->field[0]->value[4] = 0x00;
report->field[0]->value[5] = 0x00;
report->field[0]->value[6] = 0x00;
usbhid_submit_report(hid, report, USB_DIR_OUT);
}
/* Sends commands to set range compatible with Driving Force Pro wheel */
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
{
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
int start_left, start_right, full_range;
dbg_hid("Driving Force Pro: setting range to %u\n", range);
/* Prepare "coarse" limit command */
report->field[0]->value[0] = 0xf8;
report->field[0]->value[1] = 0x00; /* Set later */
report->field[0]->value[2] = 0x00;
report->field[0]->value[3] = 0x00;
report->field[0]->value[4] = 0x00;
report->field[0]->value[5] = 0x00;
report->field[0]->value[6] = 0x00;
if (range > 200) {
report->field[0]->value[1] = 0x03;
full_range = 900;
} else {
report->field[0]->value[1] = 0x02;
full_range = 200;
}
usbhid_submit_report(hid, report, USB_DIR_OUT);
/* Prepare "fine" limit command */
report->field[0]->value[0] = 0x81;
report->field[0]->value[1] = 0x0b;
report->field[0]->value[2] = 0x00;
report->field[0]->value[3] = 0x00;
report->field[0]->value[4] = 0x00;
report->field[0]->value[5] = 0x00;
report->field[0]->value[6] = 0x00;
if (range == 200 || range == 900) { /* Do not apply any fine limit */
usbhid_submit_report(hid, report, USB_DIR_OUT);
return;
}
/* Construct fine limit command */
start_left = (((full_range - range + 1) * 2047) / full_range);
start_right = 0xfff - start_left;
report->field[0]->value[2] = start_left >> 4;
report->field[0]->value[3] = start_right >> 4;
report->field[0]->value[4] = 0xff;
report->field[0]->value[5] = (start_right & 0xe) << 4 | (start_left & 0xe);
report->field[0]->value[6] = 0xff;
usbhid_submit_report(hid, report, USB_DIR_OUT);
}
static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_native_cmd *cmd)
{
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
......@@ -166,6 +260,60 @@ static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_n
}
}
/* Read current range and display it in terminal */
static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lg4ff_device_entry *entry = 0;
struct list_head *h;
struct hid_device *hid = to_hid_device(dev);
size_t count;
list_for_each(h, &device_list.list) {
entry = list_entry(h, struct lg4ff_device_entry, list);
if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
break;
}
if (h == &device_list.list) {
dbg_hid("Device not found!");
return 0;
}
count = scnprintf(buf, PAGE_SIZE, "%u\n", entry->range);
return count;
}
/* Set range to user specified value, call appropriate function
* according to the type of the wheel */
static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct lg4ff_device_entry *entry = 0;
struct list_head *h;
struct hid_device *hid = to_hid_device(dev);
__u16 range = simple_strtoul(buf, NULL, 10);
list_for_each(h, &device_list.list) {
entry = list_entry(h, struct lg4ff_device_entry, list);
if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
break;
}
if (h == &device_list.list) {
dbg_hid("Device not found!");
return count;
}
if (range == 0)
range = entry->max_range;
/* Check if the wheel supports range setting
* and that the range is within limits for the wheel */
if (entry->set_range != NULL && range >= entry->min_range && range <= entry->max_range) {
entry->set_range(hid, range);
entry->range = range;
}
return count;
}
int lg4ff_init(struct hid_device *hid)
{
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
......@@ -173,7 +321,8 @@ int lg4ff_init(struct hid_device *hid)
struct input_dev *dev = hidinput->input;
struct hid_report *report;
struct hid_field *field;
struct usb_device_descriptor *udesc = 0;
struct lg4ff_device_entry *entry;
struct usb_device_descriptor *udesc;
int error, i, j;
__u16 bcdDevice, rev_maj, rev_min;
......@@ -195,7 +344,7 @@ int lg4ff_init(struct hid_device *hid)
hid_err(hid, "NULL field\n");
return -1;
}
/* Check what wheel has been connected */
for (i = 0; i < ARRAY_SIZE(lg4ff_devices); i++) {
if (hid->product == lg4ff_devices[i].product_id) {
......@@ -244,7 +393,66 @@ int lg4ff_init(struct hid_device *hid)
if (test_bit(FF_AUTOCENTER, dev->ffbit))
dev->ff->set_autocenter = hid_lg4ff_set_autocenter;
/* Initialize device_list if this is the first device to handle by lg4ff */
if (!list_inited) {
INIT_LIST_HEAD(&device_list.list);
list_inited = 1;
}
/* Add the device to device_list */
entry = (struct lg4ff_device_entry *)kzalloc(sizeof(struct lg4ff_device_entry), GFP_KERNEL);
if (!entry) {
hid_err(hid, "Cannot add device, insufficient memory.\n");
return -ENOMEM;
}
entry->device_id = (char *)kzalloc(strlen((&hid->dev)->kobj.name) + 1, GFP_KERNEL);
if (!entry->device_id) {
hid_err(hid, "Cannot set device_id, insufficient memory.\n");
return -ENOMEM;
}
strcpy(entry->device_id, (&hid->dev)->kobj.name);
entry->min_range = lg4ff_devices[i].min_range;
entry->max_range = lg4ff_devices[i].max_range;
entry->set_range = lg4ff_devices[i].set_range;
list_add(&entry->list, &device_list.list);
/* Create sysfs interface */
error = device_create_file(&hid->dev, &dev_attr_range);
if (error)
return error;
dbg_hid("sysfs interface created\n");
/* Set the maximum range to start with */
entry->range = entry->max_range;
if (entry->set_range != NULL)
entry->set_range(hid, entry->range);
hid_info(hid, "Force feedback for Logitech Speed Force Wireless by Simon Wood <simon@mungewell.org>\n");
return 0;
}
int lg4ff_deinit(struct hid_device *hid)
{
bool found = 0;
struct lg4ff_device_entry *entry;
struct list_head *h, *g;
list_for_each_safe(h, g, &device_list.list) {
entry = list_entry(h, struct lg4ff_device_entry, list);
if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0) {
list_del(h);
kfree(entry->device_id);
kfree(entry);
found = 1;
break;
}
}
if (!found) {
dbg_hid("Device entry not found!\n");
return -1;
}
device_remove_file(&hid->dev, &dev_attr_range);
dbg_hid("Device successfully unregistered\n");
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment