Commit 31473c28 authored by Alexander Shiyan's avatar Alexander Shiyan Committed by Marc Kleine-Budde

can: mcp251x: Check return value of spi_setup()

This patch moves setup of SPI bus a bit earlier and adds check for spi_setup()
result to be sure SPI bus is communicating with the device properly.
Signed-off-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Tested-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 6afc0d7a
...@@ -1032,8 +1032,8 @@ static int mcp251x_can_probe(struct spi_device *spi) ...@@ -1032,8 +1032,8 @@ static int mcp251x_can_probe(struct spi_device *spi)
struct mcp251x_platform_data *pdata = dev_get_platdata(&spi->dev); struct mcp251x_platform_data *pdata = dev_get_platdata(&spi->dev);
struct net_device *net; struct net_device *net;
struct mcp251x_priv *priv; struct mcp251x_priv *priv;
int freq, ret = -ENODEV;
struct clk *clk; struct clk *clk;
int freq, ret;
clk = devm_clk_get(&spi->dev, NULL); clk = devm_clk_get(&spi->dev, NULL);
if (IS_ERR(clk)) { if (IS_ERR(clk)) {
...@@ -1076,6 +1076,18 @@ static int mcp251x_can_probe(struct spi_device *spi) ...@@ -1076,6 +1076,18 @@ static int mcp251x_can_probe(struct spi_device *spi)
priv->net = net; priv->net = net;
priv->clk = clk; priv->clk = clk;
spi_set_drvdata(spi, priv);
/* Configure the SPI bus */
spi->bits_per_word = 8;
if (mcp251x_is_2510(spi))
spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000;
else
spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000;
ret = spi_setup(spi);
if (ret)
goto out_clk;
priv->power = devm_regulator_get(&spi->dev, "vdd"); priv->power = devm_regulator_get(&spi->dev, "vdd");
priv->transceiver = devm_regulator_get(&spi->dev, "xceiver"); priv->transceiver = devm_regulator_get(&spi->dev, "xceiver");
if ((PTR_ERR(priv->power) == -EPROBE_DEFER) || if ((PTR_ERR(priv->power) == -EPROBE_DEFER) ||
...@@ -1088,8 +1100,6 @@ static int mcp251x_can_probe(struct spi_device *spi) ...@@ -1088,8 +1100,6 @@ static int mcp251x_can_probe(struct spi_device *spi)
if (ret) if (ret)
goto out_clk; goto out_clk;
spi_set_drvdata(spi, priv);
priv->spi = spi; priv->spi = spi;
mutex_init(&priv->mcp_lock); mutex_init(&priv->mcp_lock);
...@@ -1134,15 +1144,6 @@ static int mcp251x_can_probe(struct spi_device *spi) ...@@ -1134,15 +1144,6 @@ static int mcp251x_can_probe(struct spi_device *spi)
SET_NETDEV_DEV(net, &spi->dev); SET_NETDEV_DEV(net, &spi->dev);
/* Configure the SPI bus */
spi->mode = spi->mode ? : SPI_MODE_0;
if (mcp251x_is_2510(spi))
spi->max_speed_hz = spi->max_speed_hz ? : 5 * 1000 * 1000;
else
spi->max_speed_hz = spi->max_speed_hz ? : 10 * 1000 * 1000;
spi->bits_per_word = 8;
spi_setup(spi);
/* Here is OK to not lock the MCP, no one knows about it yet */ /* Here is OK to not lock the MCP, no one knows about it yet */
if (!mcp251x_hw_probe(spi)) { if (!mcp251x_hw_probe(spi)) {
ret = -ENODEV; ret = -ENODEV;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment