Merge branches 'consolidate.2019.08.01b', 'fixes.2019.08.12a',...

Merge branches 'consolidate.2019.08.01b', 'fixes.2019.08.12a', 'lists.2019.08.13a' and 'torture.2019.08.01b' into HEAD

consolidate.2019.08.01b: Further consolidation cleanups
fixes.2019.08.12a: Miscellaneous fixes
lists.2019.08.13a: Optional lockdep arguments for RCU list macros
torture.2019.08.01b: Torture-test updates

Documentation/RCU/Design/Requirements/Requirements.html

@@ -2129,6 +2129,8 @@ Some of the relevant points of interest are as follows:
 <li>	<a href="#Hotplug CPU">Hotplug CPU</a>.
 <li>	<a href="#Scheduler and RCU">Scheduler and RCU</a>.
 <li>	<a href="#Tracing and RCU">Tracing and RCU</a>.
+<li>	<a href="#Accesses to User Memory and RCU">
+Accesses to User Memory and RCU</a>.
 <li>	<a href="#Energy Efficiency">Energy Efficiency</a>.
 <li>	<a href="#Scheduling-Clock Interrupts and RCU">
 	Scheduling-Clock Interrupts and RCU</a>.
@@ -2512,7 +2514,7 @@ disabled across the entire RCU read-side critical section.
 <p>
 It is possible to use tracing on RCU code, but tracing itself
 uses RCU.
-For this reason, <tt>rcu_dereference_raw_notrace()</tt>
+For this reason, <tt>rcu_dereference_raw_check()</tt>
 is provided for use by tracing, which avoids the destructive
 recursion that could otherwise ensue.
 This API is also used by virtualization in some architectures,
@@ -2521,6 +2523,75 @@ cannot be used.
 The tracing folks both located the requirement and provided the
 needed fix, so this surprise requirement was relatively painless.
 
+<h3><a name="Accesses to User Memory and RCU">
+Accesses to User Memory and RCU</a></h3>
+
+<p>
+The kernel needs to access user-space memory, for example, to access
+data referenced by system-call parameters.
+The <tt>get_user()</tt> macro does this job.
+
+<p>
+However, user-space memory might well be paged out, which means
+that <tt>get_user()</tt> might well page-fault and thus block while
+waiting for the resulting I/O to complete.
+It would be a very bad thing for the compiler to reorder
+a <tt>get_user()</tt> invocation into an RCU read-side critical
+section.
+For example, suppose that the source code looked like this:
+
+<blockquote>
+<pre>
+ 1 rcu_read_lock();
+ 2 p = rcu_dereference(gp);
+ 3 v = p-&gt;value;
+ 4 rcu_read_unlock();
+ 5 get_user(user_v, user_p);
+ 6 do_something_with(v, user_v);
+</pre>
+</blockquote>
+
+<p>
+The compiler must not be permitted to transform this source code into
+the following:
+
+<blockquote>
+<pre>
+ 1 rcu_read_lock();
+ 2 p = rcu_dereference(gp);
+ 3 get_user(user_v, user_p); // BUG: POSSIBLE PAGE FAULT!!!
+ 4 v = p-&gt;value;
+ 5 rcu_read_unlock();
+ 6 do_something_with(v, user_v);
+</pre>
+</blockquote>
+
+<p>
+If the compiler did make this transformation in a
+<tt>CONFIG_PREEMPT=n</tt> kernel build, and if <tt>get_user()</tt> did
+page fault, the result would be a quiescent state in the middle
+of an RCU read-side critical section.
+This misplaced quiescent state could result in line&nbsp;4 being
+a use-after-free access, which could be bad for your kernel's
+actuarial statistics.
+Similar examples can be constructed with the call to <tt>get_user()</tt>
+preceding the <tt>rcu_read_lock()</tt>.
+
+<p>
+Unfortunately, <tt>get_user()</tt> doesn't have any particular
+ordering properties, and in some architectures the underlying <tt>asm</tt>
+isn't even marked <tt>volatile</tt>.
+And even if it was marked <tt>volatile</tt>, the above access to
+<tt>p-&gt;value</tt> is not volatile, so the compiler would not have any
+reason to keep those two accesses in order.
+
+<p>
+Therefore, the Linux-kernel definitions of <tt>rcu_read_lock()</tt>
+and <tt>rcu_read_unlock()</tt> must act as compiler barriers,
+at least for outermost instances of <tt>rcu_read_lock()</tt> and
+<tt>rcu_read_unlock()</tt> within a nested set of RCU read-side critical
+sections.
+
 <h3><a name="Energy Efficiency">Energy Efficiency</a></h3>
 
 <p>

Documentation/RCU/stallwarn.txt

@@ -57,6 +57,12 @@ o	A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
 	CONFIG_PREEMPT_RCU case, you might see stall-warning
 	messages.
 
+	You can use the rcutree.kthread_prio kernel boot parameter to
+	increase the scheduling priority of RCU's kthreads, which can
+	help avoid this problem.  However, please note that doing this
+	can increase your system's context-switch rate and thus degrade
+	performance.
+
 o	A periodic interrupt whose handler takes longer than the time
 	interval between successive pairs of interrupts.  This can
 	prevent RCU's kthreads and softirq handlers from running.

Documentation/admin-guide/kernel-parameters.txt

@@ -4047,6 +4047,10 @@
 	rcutorture.verbose= [KNL]
 			Enable additional printk() statements.
 
+	rcupdate.rcu_cpu_stall_ftrace_dump= [KNL]
+			Dump ftrace buffer after reporting RCU CPU
+			stall warning.
+
 	rcupdate.rcu_cpu_stall_suppress= [KNL]
 			Suppress RCU CPU stall warning messages.
 

MAINTAINERS

@@ -9326,7 +9326,7 @@ F:	drivers/misc/lkdtm/*
 
 LINUX KERNEL MEMORY CONSISTENCY MODEL (LKMM)
 M:	Alan Stern <stern@rowland.harvard.edu>
-M:	Andrea Parri <andrea.parri@amarulasolutions.com>
+M:	Andrea Parri <parri.andrea@gmail.com>
 M:	Will Deacon <will@kernel.org>
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Boqun Feng <boqun.feng@gmail.com>

arch/arm/kernel/smp.c

@@ -264,15 +264,13 @@ int __cpu_disable(void)
 	return 0;
 }
 
-static DECLARE_COMPLETION(cpu_died);
-
 /*
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
 void __cpu_die(unsigned int cpu)
 {
-	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
+	if (!cpu_wait_death(cpu, 5)) {
 		pr_err("CPU%u: cpu didn't die\n", cpu);
 		return;
 	}
@@ -319,7 +317,7 @@ void arch_cpu_idle_dead(void)
 	 * this returns, power and/or clocks can be removed at any point
 	 * from this CPU and its cache by platform_cpu_kill().
 	 */
-	complete(&cpu_died);
+	(void)cpu_report_death();
 
 	/*
 	 * Ensure that the cache lines associated with that completion are

arch/powerpc/include/asm/kvm_book3s_64.h

@@ -535,7 +535,7 @@ static inline void note_hpte_modification(struct kvm *kvm,
  */
 static inline struct kvm_memslots *kvm_memslots_raw(struct kvm *kvm)
 {
-	return rcu_dereference_raw_notrace(kvm->memslots[0]);
+	return rcu_dereference_raw_check(kvm->memslots[0]);
 }
 
 extern void kvmppc_mmu_debugfs_init(struct kvm *kvm);

arch/x86/pci/mmconfig-shared.c

@@ -29,6 +29,7 @@
 static bool pci_mmcfg_running_state;
 static bool pci_mmcfg_arch_init_failed;
 static DEFINE_MUTEX(pci_mmcfg_lock);
+#define pci_mmcfg_lock_held() lock_is_held(&(pci_mmcfg_lock).dep_map)
 
 LIST_HEAD(pci_mmcfg_list);
 
@@ -54,7 +55,7 @@ static void list_add_sorted(struct pci_mmcfg_region *new)
 	struct pci_mmcfg_region *cfg;
 
 	/* keep list sorted by segment and starting bus number */
-	list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list) {
+	list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list, pci_mmcfg_lock_held()) {
 		if (cfg->segment > new->segment ||
 		    (cfg->segment == new->segment &&
 		     cfg->start_bus >= new->start_bus)) {
@@ -118,7 +119,7 @@ struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus)
 {
 	struct pci_mmcfg_region *cfg;
 
-	list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
+	list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list, pci_mmcfg_lock_held())
 		if (cfg->segment == segment &&
 		    cfg->start_bus <= bus && bus <= cfg->end_bus)
 			return cfg;

drivers/acpi/osl.c

@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/highmem.h>
+#include <linux/lockdep.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/kmod.h>
@@ -80,6 +81,7 @@ struct acpi_ioremap {
 
 static LIST_HEAD(acpi_ioremaps);
 static DEFINE_MUTEX(acpi_ioremap_lock);
+#define acpi_ioremap_lock_held() lock_is_held(&acpi_ioremap_lock.dep_map)
 
 static void __init acpi_request_region (struct acpi_generic_address *gas,
 	unsigned int length, char *desc)
@@ -206,7 +208,7 @@ acpi_map_lookup(acpi_physical_address phys, acpi_size size)
 {
 	struct acpi_ioremap *map;
 
-	list_for_each_entry_rcu(map, &acpi_ioremaps, list)
+	list_for_each_entry_rcu(map, &acpi_ioremaps, list, acpi_ioremap_lock_held())
 		if (map->phys <= phys &&
 		    phys + size <= map->phys + map->size)
 			return map;
@@ -249,7 +251,7 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
 {
 	struct acpi_ioremap *map;
 
-	list_for_each_entry_rcu(map, &acpi_ioremaps, list)
+	list_for_each_entry_rcu(map, &acpi_ioremaps, list, acpi_ioremap_lock_held())
 		if (map->virt <= virt &&
 		    virt + size <= map->virt + map->size)
 			return map;

drivers/base/base.h

@@ -165,6 +165,7 @@ static inline int devtmpfs_init(void) { return 0; }
 /* Device links support */
 extern int device_links_read_lock(void);
 extern void device_links_read_unlock(int idx);
+extern int device_links_read_lock_held(void);
 extern int device_links_check_suppliers(struct device *dev);
 extern void device_links_driver_bound(struct device *dev);
 extern void device_links_driver_cleanup(struct device *dev);

drivers/base/core.c

@@ -68,6 +68,11 @@ void device_links_read_unlock(int idx)
 {
 	srcu_read_unlock(&device_links_srcu, idx);
 }
+
+int device_links_read_lock_held(void)
+{
+	return srcu_read_lock_held(&device_links_srcu);
+}
 #else /* !CONFIG_SRCU */
 static DECLARE_RWSEM(device_links_lock);
 
@@ -91,6 +96,13 @@ void device_links_read_unlock(int not_used)
 {
 	up_read(&device_links_lock);
 }
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+int device_links_read_lock_held(void)
+{
+	return lockdep_is_held(&device_links_lock);
+}
+#endif
 #endif /* !CONFIG_SRCU */
 
 /**

drivers/base/power/runtime.c

@@ -287,7 +287,8 @@ static int rpm_get_suppliers(struct device *dev)
 {
 	struct device_link *link;
 
-	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) {
+	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+				device_links_read_lock_held()) {
 		int retval;
 
 		if (!(link->flags & DL_FLAG_PM_RUNTIME) ||
@@ -309,7 +310,8 @@ static void rpm_put_suppliers(struct device *dev)
 {
 	struct device_link *link;
 
-	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node) {
+	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+				device_links_read_lock_held()) {
 		if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND)
 			continue;
 
@@ -1640,7 +1642,8 @@ void pm_runtime_clean_up_links(struct device *dev)
 
 	idx = device_links_read_lock();
 
-	list_for_each_entry_rcu(link, &dev->links.consumers, s_node) {
+	list_for_each_entry_rcu(link, &dev->links.consumers, s_node,
+				device_links_read_lock_held()) {
 		if (link->flags & DL_FLAG_STATELESS)
 			continue;
 
@@ -1662,7 +1665,8 @@ void pm_runtime_get_suppliers(struct device *dev)
 
 	idx = device_links_read_lock();
 
-	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node)
+	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+				device_links_read_lock_held())
 		if (link->flags & DL_FLAG_PM_RUNTIME) {
 			link->supplier_preactivated = true;
 			refcount_inc(&link->rpm_active);
@@ -1683,7 +1687,8 @@ void pm_runtime_put_suppliers(struct device *dev)
 
 	idx = device_links_read_lock();
 
-	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node)
+	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
+				device_links_read_lock_held())
 		if (link->supplier_preactivated) {
 			link->supplier_preactivated = false;
 			if (refcount_dec_not_one(&link->rpm_active))

include/linux/rcu_sync.h

@@ -31,9 +31,7 @@ struct rcu_sync {
  */
 static inline bool rcu_sync_is_idle(struct rcu_sync *rsp)
 {
-	RCU_LOCKDEP_WARN(!rcu_read_lock_held() &&
-			 !rcu_read_lock_bh_held() &&
-			 !rcu_read_lock_sched_held(),
+	RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),
 			 "suspicious rcu_sync_is_idle() usage");
 	return !READ_ONCE(rsp->gp_state); /* GP_IDLE */
 }

include/linux/rculist.h

@@ -40,6 +40,24 @@ static inline void INIT_LIST_HEAD_RCU(struct list_head *list)
  */
 #define list_next_rcu(list)	(*((struct list_head __rcu **)(&(list)->next)))
 
+/*
+ * Check during list traversal that we are within an RCU reader
+ */
+
+#define check_arg_count_one(dummy)
+
+#ifdef CONFIG_PROVE_RCU_LIST
+#define __list_check_rcu(dummy, cond, extra...)				\
+	({								\
+	check_arg_count_one(extra);					\
+	RCU_LOCKDEP_WARN(!cond && !rcu_read_lock_any_held(),		\
+			 "RCU-list traversed in non-reader section!");	\
+	 })
+#else
+#define __list_check_rcu(dummy, cond, extra...)				\
+	({ check_arg_count_one(extra); })
+#endif
+
 /*
  * Insert a new entry between two known consecutive entries.
  *
@@ -343,14 +361,16 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_head within the struct.
+ * @cond:	optional lockdep expression if called from non-RCU protection.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as list_add_rcu()
  * as long as the traversal is guarded by rcu_read_lock().
  */
-#define list_for_each_entry_rcu(pos, head, member) \
-	for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
-		&pos->member != (head); \
+#define list_for_each_entry_rcu(pos, head, member, cond...)		\
+	for (__list_check_rcu(dummy, ## cond, 0),			\
+	     pos = list_entry_rcu((head)->next, typeof(*pos), member);	\
+		&pos->member != (head);					\
 		pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
 
 /**
@@ -616,13 +636,15 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
+ * @cond:	optional lockdep expression if called from non-RCU protection.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as hlist_add_head_rcu()
  * as long as the traversal is guarded by rcu_read_lock().
  */
-#define hlist_for_each_entry_rcu(pos, head, member)			\
-	for (pos = hlist_entry_safe (rcu_dereference_raw(hlist_first_rcu(head)),\
+#define hlist_for_each_entry_rcu(pos, head, member, cond...)		\
+	for (__list_check_rcu(dummy, ## cond, 0),			\
+	     pos = hlist_entry_safe(rcu_dereference_raw(hlist_first_rcu(head)),\
 			typeof(*(pos)), member);			\
 		pos;							\
 		pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\
@@ -642,10 +664,10 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
  * not do any RCU debugging or tracing.
  */
 #define hlist_for_each_entry_rcu_notrace(pos, head, member)			\
-	for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\
+	for (pos = hlist_entry_safe(rcu_dereference_raw_check(hlist_first_rcu(head)),\
 			typeof(*(pos)), member);			\
 		pos;							\
-		pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\
+		pos = hlist_entry_safe(rcu_dereference_raw_check(hlist_next_rcu(\
 			&(pos)->member)), typeof(*(pos)), member))
 
 /**

include/linux/rcupdate.h

@@ -221,6 +221,7 @@ int debug_lockdep_rcu_enabled(void);
 int rcu_read_lock_held(void);
 int rcu_read_lock_bh_held(void);
 int rcu_read_lock_sched_held(void);
+int rcu_read_lock_any_held(void);
 
 #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
@@ -241,6 +242,12 @@ static inline int rcu_read_lock_sched_held(void)
 {
 	return !preemptible();
 }
+
+static inline int rcu_read_lock_any_held(void)
+{
+	return !preemptible();
+}
+
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
 #ifdef CONFIG_PROVE_RCU
@@ -476,7 +483,7 @@ do {									      \
  * The no-tracing version of rcu_dereference_raw() must not call
  * rcu_read_lock_held().
  */
-#define rcu_dereference_raw_notrace(p) __rcu_dereference_check((p), 1, __rcu)
+#define rcu_dereference_raw_check(p) __rcu_dereference_check((p), 1, __rcu)
 
 /**
  * rcu_dereference_protected() - fetch RCU pointer when updates prevented

kernel/locking/lockdep.c

@@ -620,7 +620,7 @@ static void print_lock(struct held_lock *hlock)
 		return;
 	}
 
-	printk(KERN_CONT "%p", hlock->instance);
+	printk(KERN_CONT "%px", hlock->instance);
 	print_lock_name(lock);
 	printk(KERN_CONT ", at: %pS\n", (void *)hlock->acquire_ip);
 }

kernel/rcu/Kconfig.debug

@@ -8,6 +8,17 @@ menu "RCU Debugging"
 config PROVE_RCU
 	def_bool PROVE_LOCKING
 
+config PROVE_RCU_LIST
+	bool "RCU list lockdep debugging"
+	depends on PROVE_RCU && RCU_EXPERT
+	default n
+	help
+	  Enable RCU lockdep checking for list usages. By default it is
+	  turned off since there are several list RCU users that still
+	  need to be converted to pass a lockdep expression. To prevent
+	  false-positive splats, we keep it default disabled but once all
+	  users are converted, we can remove this config option.
+
 config TORTURE_TEST
 	tristate
 	default n

kernel/rcu/rcu.h

@@ -227,6 +227,7 @@ static inline bool __rcu_reclaim(const char *rn, struct rcu_head *head)
 
 #ifdef CONFIG_RCU_STALL_COMMON
 
+extern int rcu_cpu_stall_ftrace_dump;
 extern int rcu_cpu_stall_suppress;
 extern int rcu_cpu_stall_timeout;
 int rcu_jiffies_till_stall_check(void);

kernel/rcu/rcu_segcblist.h

@@ -76,27 +76,6 @@ static inline bool rcu_segcblist_restempty(struct rcu_segcblist *rsclp, int seg)
 	return !*rsclp->tails[seg];
 }
 
-/*
- * Interim function to return rcu_segcblist head pointer.  Longer term, the
- * rcu_segcblist will be used more pervasively, removing the need for this
- * function.
- */
-static inline struct rcu_head *rcu_segcblist_head(struct rcu_segcblist *rsclp)
-{
-	return rsclp->head;
-}
-
-/*
- * Interim function to return rcu_segcblist head pointer.  Longer term, the
- * rcu_segcblist will be used more pervasively, removing the need for this
- * function.
- */
-static inline struct rcu_head **rcu_segcblist_tail(struct rcu_segcblist *rsclp)
-{
-	WARN_ON_ONCE(rcu_segcblist_empty(rsclp));
-	return rsclp->tails[RCU_NEXT_TAIL];
-}
-
 void rcu_segcblist_init(struct rcu_segcblist *rsclp);
 void rcu_segcblist_disable(struct rcu_segcblist *rsclp);
 bool rcu_segcblist_ready_cbs(struct rcu_segcblist *rsclp);

kernel/rcu/rcuperf.c

@@ -89,7 +89,7 @@ torture_param(int, writer_holdoff, 0, "Holdoff (us) between GPs, zero to disable
 
 static char *perf_type = "rcu";
 module_param(perf_type, charp, 0444);
-MODULE_PARM_DESC(perf_type, "Type of RCU to performance-test (rcu, rcu_bh, ...)");
+MODULE_PARM_DESC(perf_type, "Type of RCU to performance-test (rcu, srcu, ...)");
 
 static int nrealreaders;
 static int nrealwriters;
@@ -375,6 +375,14 @@ rcu_perf_writer(void *arg)
 	if (holdoff)
 		schedule_timeout_uninterruptible(holdoff * HZ);
 
+	/*
+	 * Wait until rcu_end_inkernel_boot() is called for normal GP tests
+	 * so that RCU is not always expedited for normal GP tests.
+	 * The system_state test is approximate, but works well in practice.
+	 */
+	while (!gp_exp && system_state != SYSTEM_RUNNING)
+		schedule_timeout_uninterruptible(1);
+
 	t = ktime_get_mono_fast_ns();
 	if (atomic_inc_return(&n_rcu_perf_writer_started) >= nrealwriters) {
 		t_rcu_perf_writer_started = t;

kernel/rcu/rcutorture.c

@@ -161,6 +161,7 @@ static atomic_long_t n_rcu_torture_timers;
 static long n_barrier_attempts;
 static long n_barrier_successes; /* did rcu_barrier test succeed? */
 static struct list_head rcu_torture_removed;
+static unsigned long shutdown_jiffies;
 
 static int rcu_torture_writer_state;
 #define RTWS_FIXED_DELAY	0
@@ -228,6 +229,15 @@ static u64 notrace rcu_trace_clock_local(void)
 }
 #endif /* #else #ifdef CONFIG_RCU_TRACE */
 
+/*
+ * Stop aggressive CPU-hog tests a bit before the end of the test in order
+ * to avoid interfering with test shutdown.
+ */
+static bool shutdown_time_arrived(void)
+{
+	return shutdown_secs && time_after(jiffies, shutdown_jiffies - 30 * HZ);
+}
+
 static unsigned long boost_starttime;	/* jiffies of next boost test start. */
 static DEFINE_MUTEX(boost_mutex);	/* protect setting boost_starttime */
 					/*  and boost task create/destroy. */
@@ -1713,12 +1723,14 @@ static void rcu_torture_fwd_cb_cr(struct rcu_head *rhp)
 }
 
 // Give the scheduler a chance, even on nohz_full CPUs.
-static void rcu_torture_fwd_prog_cond_resched(void)
+static void rcu_torture_fwd_prog_cond_resched(unsigned long iter)
 {
 	if (IS_ENABLED(CONFIG_PREEMPT) && IS_ENABLED(CONFIG_NO_HZ_FULL)) {
-		if (need_resched())
+		// Real call_rcu() floods hit userspace, so emulate that.
+		if (need_resched() || (iter & 0xfff))
 			schedule();
 	} else {
+		// No userspace emulation: CB invocation throttles call_rcu()
 		cond_resched();
 	}
 }
@@ -1746,7 +1758,7 @@ static unsigned long rcu_torture_fwd_prog_cbfree(void)
 		spin_unlock_irqrestore(&rcu_fwd_lock, flags);
 		kfree(rfcp);
 		freed++;
-		rcu_torture_fwd_prog_cond_resched();
+		rcu_torture_fwd_prog_cond_resched(freed);
 	}
 	return freed;
 }
@@ -1785,15 +1797,17 @@ static void rcu_torture_fwd_prog_nr(int *tested, int *tested_tries)
 	WRITE_ONCE(rcu_fwd_startat, jiffies);
 	stopat = rcu_fwd_startat + dur;
 	while (time_before(jiffies, stopat) &&
+	       !shutdown_time_arrived() &&
 	       !READ_ONCE(rcu_fwd_emergency_stop) && !torture_must_stop()) {
 		idx = cur_ops->readlock();
 		udelay(10);
 		cur_ops->readunlock(idx);
 		if (!fwd_progress_need_resched || need_resched())
-			rcu_torture_fwd_prog_cond_resched();
+			rcu_torture_fwd_prog_cond_resched(1);
 	}
 	(*tested_tries)++;
 	if (!time_before(jiffies, stopat) &&
+	    !shutdown_time_arrived() &&
 	    !READ_ONCE(rcu_fwd_emergency_stop) && !torture_must_stop()) {
 		(*tested)++;
 		cver = READ_ONCE(rcu_torture_current_version) - cver;
@@ -1852,6 +1866,7 @@ static void rcu_torture_fwd_prog_cr(void)
 	gps = cur_ops->get_gp_seq();
 	rcu_launder_gp_seq_start = gps;
 	while (time_before(jiffies, stopat) &&
+	       !shutdown_time_arrived() &&
 	       !READ_ONCE(rcu_fwd_emergency_stop) && !torture_must_stop()) {
 		rfcp = READ_ONCE(rcu_fwd_cb_head);
 		rfcpn = NULL;
@@ -1875,7 +1890,7 @@ static void rcu_torture_fwd_prog_cr(void)
 			rfcp->rfc_gps = 0;
 		}
 		cur_ops->call(&rfcp->rh, rcu_torture_fwd_cb_cr);
-		rcu_torture_fwd_prog_cond_resched();
+		rcu_torture_fwd_prog_cond_resched(n_launders + n_max_cbs);
 	}
 	stoppedat = jiffies;
 	n_launders_cb_snap = READ_ONCE(n_launders_cb);
@@ -1884,7 +1899,8 @@ static void rcu_torture_fwd_prog_cr(void)
 	cur_ops->cb_barrier(); /* Wait for callbacks to be invoked. */
 	(void)rcu_torture_fwd_prog_cbfree();
 
-	if (!torture_must_stop() && !READ_ONCE(rcu_fwd_emergency_stop)) {
+	if (!torture_must_stop() && !READ_ONCE(rcu_fwd_emergency_stop) &&
+	    !shutdown_time_arrived()) {
 		WARN_ON(n_max_gps < MIN_FWD_CBS_LAUNDERED);
 		pr_alert("%s Duration %lu barrier: %lu pending %ld n_launders: %ld n_launders_sa: %ld n_max_gps: %ld n_max_cbs: %ld cver %ld gps %ld\n",
 			 __func__,
@@ -2465,6 +2481,7 @@ rcu_torture_init(void)
 			goto unwind;
 		rcutor_hp = firsterr;
 	}
+	shutdown_jiffies = jiffies + shutdown_secs * HZ;
 	firsterr = torture_shutdown_init(shutdown_secs, rcu_torture_cleanup);
 	if (firsterr)
 		goto unwind;

kernel/rcu/srcutree.c

@@ -1279,8 +1279,9 @@ void srcu_torture_stats_print(struct srcu_struct *ssp, char *tt, char *tf)
 
 		c0 = l0 - u0;
 		c1 = l1 - u1;
-		pr_cont(" %d(%ld,%ld %1p)",
-			cpu, c0, c1, rcu_segcblist_head(&sdp->srcu_cblist));
+		pr_cont(" %d(%ld,%ld %c)",
+			cpu, c0, c1,
+			"C."[rcu_segcblist_empty(&sdp->srcu_cblist)]);
 		s0 += c0;
 		s1 += c1;
 	}

kernel/rcu/tree_exp.h

@@ -781,7 +781,7 @@ static int rcu_print_task_exp_stall(struct rcu_node *rnp)
  * other hand, if the CPU is not in an RCU read-side critical section,
  * the IPI handler reports the quiescent state immediately.
  *
- * Although this is a greate improvement over previous expedited
+ * Although this is a great improvement over previous expedited
  * implementations, it is still unfriendly to real-time workloads, so is
  * thus not recommended for any sort of common-case code.  In fact, if
  * you are using synchronize_rcu_expedited() in a loop, please restructure
@@ -792,6 +792,7 @@ static int rcu_print_task_exp_stall(struct rcu_node *rnp)
  */
 void synchronize_rcu_expedited(void)
 {
+	bool boottime = (rcu_scheduler_active == RCU_SCHEDULER_INIT);
 	struct rcu_exp_work rew;
 	struct rcu_node *rnp;
 	unsigned long s;
@@ -817,7 +818,7 @@ void synchronize_rcu_expedited(void)
 		return;  /* Someone else did our work for us. */
 
 	/* Ensure that load happens before action based on it. */
-	if (unlikely(rcu_scheduler_active == RCU_SCHEDULER_INIT)) {
+	if (unlikely(boottime)) {
 		/* Direct call during scheduler init and early_initcalls(). */
 		rcu_exp_sel_wait_wake(s);
 	} else {
@@ -835,5 +836,8 @@ void synchronize_rcu_expedited(void)
 
 	/* Let the next expedited grace period start. */
 	mutex_unlock(&rcu_state.exp_mutex);
+
+	if (likely(!boottime))
+		destroy_work_on_stack(&rew.rew_work);
 }
 EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);

kernel/rcu/tree_plugin.h

@@ -288,7 +288,6 @@ void rcu_note_context_switch(bool preempt)
 	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
 	struct rcu_node *rnp;
 
-	barrier(); /* Avoid RCU read-side critical sections leaking down. */
 	trace_rcu_utilization(TPS("Start context switch"));
 	lockdep_assert_irqs_disabled();
 	WARN_ON_ONCE(!preempt && t->rcu_read_lock_nesting > 0);
@@ -331,7 +330,6 @@ void rcu_note_context_switch(bool preempt)
 	if (rdp->exp_deferred_qs)
 		rcu_report_exp_rdp(rdp);
 	trace_rcu_utilization(TPS("End context switch"));
-	barrier(); /* Avoid RCU read-side critical sections leaking up. */
 }
 EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 
@@ -815,11 +813,6 @@ static void rcu_qs(void)
  * dyntick-idle quiescent state visible to other CPUs, which will in
  * some cases serve for expedited as well as normal grace periods.
  * Either way, register a lightweight quiescent state.
- *
- * The barrier() calls are redundant in the common case when this is
- * called externally, but just in case this is called from within this
- * file.
- *
  */
 void rcu_all_qs(void)
 {
@@ -834,14 +827,12 @@ void rcu_all_qs(void)
 		return;
 	}
 	this_cpu_write(rcu_data.rcu_urgent_qs, false);
-	barrier(); /* Avoid RCU read-side critical sections leaking down. */
 	if (unlikely(raw_cpu_read(rcu_data.rcu_need_heavy_qs))) {
 		local_irq_save(flags);
 		rcu_momentary_dyntick_idle();
 		local_irq_restore(flags);
 	}
 	rcu_qs();
-	barrier(); /* Avoid RCU read-side critical sections leaking up. */
 	preempt_enable();
 }
 EXPORT_SYMBOL_GPL(rcu_all_qs);
@@ -851,7 +842,6 @@ EXPORT_SYMBOL_GPL(rcu_all_qs);
  */
 void rcu_note_context_switch(bool preempt)
 {
-	barrier(); /* Avoid RCU read-side critical sections leaking down. */
 	trace_rcu_utilization(TPS("Start context switch"));
 	rcu_qs();
 	/* Load rcu_urgent_qs before other flags. */
@@ -864,7 +854,6 @@ void rcu_note_context_switch(bool preempt)
 		rcu_tasks_qs(current);
 out:
 	trace_rcu_utilization(TPS("End context switch"));
-	barrier(); /* Avoid RCU read-side critical sections leaking up. */
 }
 EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 
@@ -1121,7 +1110,7 @@ static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
  * already exist.  We only create this kthread for preemptible RCU.
  * Returns zero if all is well, a negated errno otherwise.
  */
-static int rcu_spawn_one_boost_kthread(struct rcu_node *rnp)
+static void rcu_spawn_one_boost_kthread(struct rcu_node *rnp)
 {
 	int rnp_index = rnp - rcu_get_root();
 	unsigned long flags;
@@ -1129,25 +1118,27 @@ static int rcu_spawn_one_boost_kthread(struct rcu_node *rnp)
 	struct task_struct *t;
 
 	if (!IS_ENABLED(CONFIG_PREEMPT_RCU))
-		return 0;
+		return;
 
 	if (!rcu_scheduler_fully_active || rcu_rnp_online_cpus(rnp) == 0)
-		return 0;
+		return;
 
 	rcu_state.boost = 1;
+
 	if (rnp->boost_kthread_task != NULL)
-		return 0;
+		return;
+
 	t = kthread_create(rcu_boost_kthread, (void *)rnp,
 			   "rcub/%d", rnp_index);
-	if (IS_ERR(t))
-		return PTR_ERR(t);
+	if (WARN_ON_ONCE(IS_ERR(t)))
+		return;
+
 	raw_spin_lock_irqsave_rcu_node(rnp, flags);
 	rnp->boost_kthread_task = t;
 	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
 	sp.sched_priority = kthread_prio;
 	sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
 	wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
-	return 0;
 }
 
 /*
@@ -1188,7 +1179,7 @@ static void __init rcu_spawn_boost_kthreads(void)
 	struct rcu_node *rnp;
 
 	rcu_for_each_leaf_node(rnp)
-		(void)rcu_spawn_one_boost_kthread(rnp);
+		rcu_spawn_one_boost_kthread(rnp);
 }
 
 static void rcu_prepare_kthreads(int cpu)
@@ -1198,7 +1189,7 @@ static void rcu_prepare_kthreads(int cpu)
 
 	/* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
 	if (rcu_scheduler_fully_active)
-		(void)rcu_spawn_one_boost_kthread(rnp);
+		rcu_spawn_one_boost_kthread(rnp);
 }
 
 #else /* #ifdef CONFIG_RCU_BOOST */

kernel/rcu/tree_stall.h

@@ -527,6 +527,8 @@ static void check_cpu_stall(struct rcu_data *rdp)
 
 		/* We haven't checked in, so go dump stack. */
 		print_cpu_stall();
+		if (rcu_cpu_stall_ftrace_dump)
+			rcu_ftrace_dump(DUMP_ALL);
 
 	} else if (rcu_gp_in_progress() &&
 		   ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY) &&
@@ -534,6 +536,8 @@ static void check_cpu_stall(struct rcu_data *rdp)
 
 		/* They had a few time units to dump stack, so complain. */
 		print_other_cpu_stall(gs2);
+		if (rcu_cpu_stall_ftrace_dump)
+			rcu_ftrace_dump(DUMP_ALL);
 	}
 }
 

kernel/rcu/update.c

@@ -61,9 +61,15 @@ module_param(rcu_normal_after_boot, int, 0);
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 /**
- * rcu_read_lock_sched_held() - might we be in RCU-sched read-side critical section?
+ * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
+ * @ret:	Best guess answer if lockdep cannot be relied on
  *
- * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an
+ * Returns true if lockdep must be ignored, in which case *ret contains
+ * the best guess described below.  Otherwise returns false, in which
+ * case *ret tells the caller nothing and the caller should instead
+ * consult lockdep.
+ *
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, set *ret to nonzero iff in an
  * RCU-sched read-side critical section.  In absence of
  * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
  * critical section unless it can prove otherwise.  Note that disabling
@@ -75,35 +81,45 @@ module_param(rcu_normal_after_boot, int, 0);
  * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
  * and while lockdep is disabled.
  *
- * Note that if the CPU is in the idle loop from an RCU point of
- * view (ie: that we are in the section between rcu_idle_enter() and
- * rcu_idle_exit()) then rcu_read_lock_held() returns false even if the CPU
- * did an rcu_read_lock().  The reason for this is that RCU ignores CPUs
- * that are in such a section, considering these as in extended quiescent
- * state, so such a CPU is effectively never in an RCU read-side critical
- * section regardless of what RCU primitives it invokes.  This state of
- * affairs is required --- we need to keep an RCU-free window in idle
- * where the CPU may possibly enter into low power mode. This way we can
- * notice an extended quiescent state to other CPUs that started a grace
- * period. Otherwise we would delay any grace period as long as we run in
- * the idle task.
+ * Note that if the CPU is in the idle loop from an RCU point of view (ie:
+ * that we are in the section between rcu_idle_enter() and rcu_idle_exit())
+ * then rcu_read_lock_held() sets *ret to false even if the CPU did an
+ * rcu_read_lock().  The reason for this is that RCU ignores CPUs that are
+ * in such a section, considering these as in extended quiescent state,
+ * so such a CPU is effectively never in an RCU read-side critical section
+ * regardless of what RCU primitives it invokes.  This state of affairs is
+ * required --- we need to keep an RCU-free window in idle where the CPU may
+ * possibly enter into low power mode. This way we can notice an extended
+ * quiescent state to other CPUs that started a grace period. Otherwise
+ * we would delay any grace period as long as we run in the idle task.
  *
- * Similarly, we avoid claiming an SRCU read lock held if the current
+ * Similarly, we avoid claiming an RCU read lock held if the current
  * CPU is offline.
  */
+static bool rcu_read_lock_held_common(bool *ret)
+{
+	if (!debug_lockdep_rcu_enabled()) {
+		*ret = 1;
+		return true;
+	}
+	if (!rcu_is_watching()) {
+		*ret = 0;
+		return true;
+	}
+	if (!rcu_lockdep_current_cpu_online()) {
+		*ret = 0;
+		return true;
+	}
+	return false;
+}
+
 int rcu_read_lock_sched_held(void)
 {
-	int lockdep_opinion = 0;
+	bool ret;
 
-	if (!debug_lockdep_rcu_enabled())
-		return 1;
-	if (!rcu_is_watching())
-		return 0;
-	if (!rcu_lockdep_current_cpu_online())
-		return 0;
-	if (debug_locks)
-		lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
-	return lockdep_opinion || !preemptible();
+	if (rcu_read_lock_held_common(&ret))
+		return ret;
+	return lock_is_held(&rcu_sched_lock_map) || !preemptible();
 }
 EXPORT_SYMBOL(rcu_read_lock_sched_held);
 #endif
@@ -136,8 +152,7 @@ static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
  */
 bool rcu_gp_is_expedited(void)
 {
-	return rcu_expedited || atomic_read(&rcu_expedited_nesting) ||
-	       rcu_scheduler_active == RCU_SCHEDULER_INIT;
+	return rcu_expedited || atomic_read(&rcu_expedited_nesting);
 }
 EXPORT_SYMBOL_GPL(rcu_gp_is_expedited);
 
@@ -261,12 +276,10 @@ NOKPROBE_SYMBOL(debug_lockdep_rcu_enabled);
  */
 int rcu_read_lock_held(void)
 {
-	if (!debug_lockdep_rcu_enabled())
-		return 1;
-	if (!rcu_is_watching())
-		return 0;
-	if (!rcu_lockdep_current_cpu_online())
-		return 0;
+	bool ret;
+
+	if (rcu_read_lock_held_common(&ret))
+		return ret;
 	return lock_is_held(&rcu_lock_map);
 }
 EXPORT_SYMBOL_GPL(rcu_read_lock_held);
@@ -288,16 +301,28 @@ EXPORT_SYMBOL_GPL(rcu_read_lock_held);
  */
 int rcu_read_lock_bh_held(void)
 {
-	if (!debug_lockdep_rcu_enabled())
-		return 1;
-	if (!rcu_is_watching())
-		return 0;
-	if (!rcu_lockdep_current_cpu_online())
-		return 0;
+	bool ret;
+
+	if (rcu_read_lock_held_common(&ret))
+		return ret;
 	return in_softirq() || irqs_disabled();
 }
 EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
 
+int rcu_read_lock_any_held(void)
+{
+	bool ret;
+
+	if (rcu_read_lock_held_common(&ret))
+		return ret;
+	if (lock_is_held(&rcu_lock_map) ||
+	    lock_is_held(&rcu_bh_lock_map) ||
+	    lock_is_held(&rcu_sched_lock_map))
+		return 1;
+	return !preemptible();
+}
+EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);
+
 #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
 /**
@@ -437,6 +462,8 @@ EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity);
 #endif
 
 #ifdef CONFIG_RCU_STALL_COMMON
+int rcu_cpu_stall_ftrace_dump __read_mostly;
+module_param(rcu_cpu_stall_ftrace_dump, int, 0644);
 int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
 module_param(rcu_cpu_stall_suppress, int, 0644);

kernel/sched/core.c

@@ -3486,8 +3486,36 @@ void scheduler_tick(void)
 
 struct tick_work {
 	int			cpu;
+	atomic_t		state;
 	struct delayed_work	work;
 };
+/* Values for ->state, see diagram below. */
+#define TICK_SCHED_REMOTE_OFFLINE	0
+#define TICK_SCHED_REMOTE_OFFLINING	1
+#define TICK_SCHED_REMOTE_RUNNING	2
+
+/*
+ * State diagram for ->state:
+ *
+ *
+ *          TICK_SCHED_REMOTE_OFFLINE
+ *                    |   ^
+ *                    |   |
+ *                    |   | sched_tick_remote()
+ *                    |   |
+ *                    |   |
+ *                    +--TICK_SCHED_REMOTE_OFFLINING
+ *                    |   ^
+ *                    |   |
+ * sched_tick_start() |   | sched_tick_stop()
+ *                    |   |
+ *                    V   |
+ *          TICK_SCHED_REMOTE_RUNNING
+ *
+ *
+ * Other transitions get WARN_ON_ONCE(), except that sched_tick_remote()
+ * and sched_tick_start() are happy to leave the state in RUNNING.
+ */
 
 static struct tick_work __percpu *tick_work_cpu;
 
@@ -3500,6 +3528,7 @@ static void sched_tick_remote(struct work_struct *work)
 	struct task_struct *curr;
 	struct rq_flags rf;
 	u64 delta;
+	int os;
 
 	/*
 	 * Handle the tick only if it appears the remote CPU is running in full
@@ -3513,7 +3542,7 @@ static void sched_tick_remote(struct work_struct *work)
 
 	rq_lock_irq(rq, &rf);
 	curr = rq->curr;
-	if (is_idle_task(curr))
+	if (is_idle_task(curr) || cpu_is_offline(cpu))
 		goto out_unlock;
 
 	update_rq_clock(rq);
@@ -3533,13 +3562,18 @@ static void sched_tick_remote(struct work_struct *work)
 	/*
 	 * Run the remote tick once per second (1Hz). This arbitrary
 	 * frequency is large enough to avoid overload but short enough
-	 * to keep scheduler internal stats reasonably up to date.
+	 * to keep scheduler internal stats reasonably up to date.  But
+	 * first update state to reflect hotplug activity if required.
 	 */
-	queue_delayed_work(system_unbound_wq, dwork, HZ);
+	os = atomic_fetch_add_unless(&twork->state, -1, TICK_SCHED_REMOTE_RUNNING);
+	WARN_ON_ONCE(os == TICK_SCHED_REMOTE_OFFLINE);
+	if (os == TICK_SCHED_REMOTE_RUNNING)
+		queue_delayed_work(system_unbound_wq, dwork, HZ);
 }
 
 static void sched_tick_start(int cpu)
 {
+	int os;
 	struct tick_work *twork;
 
 	if (housekeeping_cpu(cpu, HK_FLAG_TICK))
@@ -3548,15 +3582,20 @@ static void sched_tick_start(int cpu)
 	WARN_ON_ONCE(!tick_work_cpu);
 
 	twork = per_cpu_ptr(tick_work_cpu, cpu);
-	twork->cpu = cpu;
-	INIT_DELAYED_WORK(&twork->work, sched_tick_remote);
-	queue_delayed_work(system_unbound_wq, &twork->work, HZ);
+	os = atomic_xchg(&twork->state, TICK_SCHED_REMOTE_RUNNING);
+	WARN_ON_ONCE(os == TICK_SCHED_REMOTE_RUNNING);
+	if (os == TICK_SCHED_REMOTE_OFFLINE) {
+		twork->cpu = cpu;
+		INIT_DELAYED_WORK(&twork->work, sched_tick_remote);
+		queue_delayed_work(system_unbound_wq, &twork->work, HZ);
+	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
 static void sched_tick_stop(int cpu)
 {
 	struct tick_work *twork;
+	int os;
 
 	if (housekeeping_cpu(cpu, HK_FLAG_TICK))
 		return;
@@ -3564,7 +3603,10 @@ static void sched_tick_stop(int cpu)
 	WARN_ON_ONCE(!tick_work_cpu);
 
 	twork = per_cpu_ptr(tick_work_cpu, cpu);
-	cancel_delayed_work_sync(&twork->work);
+	/* There cannot be competing actions, but don't rely on stop-machine. */
+	os = atomic_xchg(&twork->state, TICK_SCHED_REMOTE_OFFLINING);
+	WARN_ON_ONCE(os != TICK_SCHED_REMOTE_RUNNING);
+	/* Don't cancel, as this would mess up the state machine. */
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -3572,7 +3614,6 @@ int __init sched_tick_offload_init(void)
 {
 	tick_work_cpu = alloc_percpu(struct tick_work);
 	BUG_ON(!tick_work_cpu);
-
 	return 0;
 }
 

kernel/sched/idle.c

@@ -241,13 +241,14 @@ static void do_idle(void)
 		check_pgt_cache();
 		rmb();
 
+		local_irq_disable();
+
 		if (cpu_is_offline(cpu)) {
-			tick_nohz_idle_stop_tick_protected();
+			tick_nohz_idle_stop_tick();
 			cpuhp_report_idle_dead();
 			arch_cpu_idle_dead();
 		}
 
-		local_irq_disable();
 		arch_cpu_idle_enter();
 
 		/*

kernel/torture.c

@@ -263,7 +263,6 @@ static void torture_onoff_cleanup(void)
 	onoff_task = NULL;
 #endif /* #ifdef CONFIG_HOTPLUG_CPU */
 }
-EXPORT_SYMBOL_GPL(torture_onoff_cleanup);
 
 /*
  * Print online/offline testing statistics.
@@ -449,7 +448,6 @@ static void torture_shuffle_cleanup(void)
 	}
 	shuffler_task = NULL;
 }
-EXPORT_SYMBOL_GPL(torture_shuffle_cleanup);
 
 /*
  * Variables for auto-shutdown.  This allows "lights out" torture runs

kernel/trace/ftrace_internal.h

@@ -6,22 +6,22 @@
 
 /*
  * Traverse the ftrace_global_list, invoking all entries.  The reason that we
- * can use rcu_dereference_raw_notrace() is that elements removed from this list
+ * can use rcu_dereference_raw_check() is that elements removed from this list
  * are simply leaked, so there is no need to interact with a grace-period
- * mechanism.  The rcu_dereference_raw_notrace() calls are needed to handle
+ * mechanism.  The rcu_dereference_raw_check() calls are needed to handle
  * concurrent insertions into the ftrace_global_list.
  *
  * Silly Alpha and silly pointer-speculation compiler optimizations!
  */
 #define do_for_each_ftrace_op(op, list)			\
-	op = rcu_dereference_raw_notrace(list);			\
+	op = rcu_dereference_raw_check(list);			\
 	do
 
 /*
  * Optimized for just a single item in the list (as that is the normal case).
  */
 #define while_for_each_ftrace_op(op)				\
-	while (likely(op = rcu_dereference_raw_notrace((op)->next)) &&	\
+	while (likely(op = rcu_dereference_raw_check((op)->next)) &&	\
 	       unlikely((op) != &ftrace_list_end))
 
 extern struct ftrace_ops __rcu *ftrace_ops_list;

kernel/trace/trace.c

@@ -2642,10 +2642,10 @@ static void ftrace_exports(struct ring_buffer_event *event)
 
 	preempt_disable_notrace();
 
-	export = rcu_dereference_raw_notrace(ftrace_exports_list);
+	export = rcu_dereference_raw_check(ftrace_exports_list);
 	while (export) {
 		trace_process_export(export, event);
-		export = rcu_dereference_raw_notrace(export->next);
+		export = rcu_dereference_raw_check(export->next);
 	}
 
 	preempt_enable_notrace();

net/ipv4/fib_frontend.c

@@ -124,7 +124,8 @@ struct fib_table *fib_get_table(struct net *net, u32 id)
 	h = id & (FIB_TABLE_HASHSZ - 1);
 
 	head = &net->ipv4.fib_table_hash[h];
-	hlist_for_each_entry_rcu(tb, head, tb_hlist) {
+	hlist_for_each_entry_rcu(tb, head, tb_hlist,
+				 lockdep_rtnl_is_held()) {
 		if (tb->tb_id == id)
 			return tb;
 	}

tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh

@@ -227,7 +227,7 @@ then
 			must_continue=yes
 		fi
 		last_ts="`tail $resdir/console.log | grep '^\[ *[0-9]\+\.[0-9]\+]' | tail -1 | sed -e 's/^\[ *//' -e 's/\..*$//'`"
-		if test -z "last_ts"
+		if test -z "$last_ts"
 		then
 			last_ts=0
 		fi

tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot

@@ -3,3 +3,4 @@ rcutree.gp_preinit_delay=12
 rcutree.gp_init_delay=3
 rcutree.gp_cleanup_delay=3
 rcutree.kthread_prio=2
+threadirqs