Commit 31fae7c8 authored by Vignesh Raghavendra's avatar Vignesh Raghavendra Committed by Greg Kroah-Hartman

serial: 8250: 8250_omap: Fix possible interrupt storm

It is possible that RX TIMEOUT is signalled after RX FIFO has been
drained, in which case a dummy read of RX FIFO is required to clear RX
TIMEOUT condition. Otherwise, RX TIMEOUT condition is not cleared
leading to an interrupt storm

Cc: stable@vger.kernel.org
Reported-by: default avatarJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20210511151955.28071-1-vigneshr@ti.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 1f06f571
......@@ -104,6 +104,9 @@
#define UART_OMAP_EFR2 0x23
#define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6)
/* RX FIFO occupancy indicator */
#define UART_OMAP_RX_LVL 0x64
struct omap8250_priv {
int line;
u8 habit;
......@@ -625,6 +628,15 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
serial8250_rpm_get(up);
iir = serial_port_in(port, UART_IIR);
ret = serial8250_handle_irq(port, iir);
/*
* It is possible that RX TIMEOUT is signalled after FIFO
* has been drained, in which case a dummy read of RX FIFO is
* required to clear RX TIMEOUT condition.
*/
if ((iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT) {
if (serial_port_in(port, UART_OMAP_RX_LVL) == 0)
serial_port_in(port, UART_RX);
}
serial8250_rpm_put(up);
return IRQ_RETVAL(ret);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment