Commit 32351a28 authored by Paul Mundt's avatar Paul Mundt Committed by Paul Mundt

sh: Add SH7785 Highlander board support (R7785RP).

This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent be782df5
......@@ -197,12 +197,8 @@ config SH_RTS7751R2D
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_R7780RP
bool "R7780RP-1"
select CPU_SUBTYPE_SH7780
help
Select R7780RP-1 if configuring for a Renesas Solutions
HIGHLANDER board.
config SH_HIGHLANDER
bool "Highlander"
config SH_EDOSK7705
bool "EDOSK7705"
......@@ -262,6 +258,10 @@ config SH_UNKNOWN
endchoice
source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
source "arch/sh/mm/Kconfig"
config CF_ENABLER
......@@ -412,8 +412,9 @@ config CPU_HAS_PTEA
endmenu
menu "Timer support"
depends on !GENERIC_TIME
menu "Timer and clock configuration"
if !GENERIC_TIME
config SH_TMU
bool "TMU timer support"
......@@ -436,17 +437,11 @@ config SH_MTU2
help
This enables the use of the MTU2 as the system timer.
endmenu
source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
endif
config SH_TIMER_IRQ
int
default "28" if CPU_SUBTYPE_SH7780
default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
default "16"
......@@ -476,7 +471,8 @@ config SH_PCLK_FREQ
default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206
default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
CPU_SUBTYPE_SH7785
default "60000000" if CPU_SUBTYPE_SH7751
default "66000000" if CPU_SUBTYPE_SH4_202
help
......@@ -491,6 +487,8 @@ config SH_CLK_MD
help
MD2 - MD0 pin setting.
endmenu
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
......@@ -509,21 +507,6 @@ config SH_CPU_FREQ
endmenu
source "arch/sh/drivers/dma/Kconfig"
source "arch/sh/cchips/Kconfig"
config HEARTBEAT
bool "Heartbeat LED"
depends on SH_MPC1211 || SH_SH03 || \
SOLUTION_ENGINE || \
SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
SH_R7780RP
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
source "arch/sh/drivers/Kconfig"
endmenu
......
......@@ -102,7 +102,7 @@ machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip
machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705
machdir-$(CONFIG_SH_R7780RP) := renesas/r7780rp
machdir-$(CONFIG_SH_HIGHLANDER) := renesas/r7780rp
machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw
machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev
machdir-$(CONFIG_SH_LANDISK) := landisk
......
if SH_R7780RP
if SH_HIGHLANDER
menu "R7780RP options"
choice
prompt "Highlander options"
default SH_R7780MP
config SH_R7780RP
bool "R7780RP-1 board support"
select CPU_SUBTYPE_SH7780
config SH_R7780MP
bool "R7780MP board support"
default y
select CPU_SUBTYPE_SH7780
help
Selecting this option will enable support for the mass-production
version of the R7780RP. If in doubt, say Y.
endmenu
config SH_R7785RP
bool "R7785RP board support"
select CPU_SUBTYPE_SH7785
endchoice
endif
#
# Makefile for the R7780RP-1 specific parts of the kernel
#
obj-y := setup.o irq.o
irqinit-y := irq-r7780rp.o
irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o
obj-$(CONFIG_PUSH_SWITCH) += psw.o
obj-y := setup.o irq.o $(irqinit-y)
/*
* Renesas Solutions Highlander R7780RP-1 Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <asm/io.h>
#include <asm/r7780rp.h>
void __init highlander_init_irq(void)
{
int i;
for (i = 0; i < 15; i++)
make_r7780rp_irq(i);
}
/*
* Renesas Solutions Highlander R7780RP-1 Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <asm/io.h>
#include <asm/r7780rp.h>
void __init highlander_init_irq(void)
{
ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
/* Setup the FPGA IRL */
ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */
ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */
ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */
ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */
ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */
make_r7780rp_irq(1); /* CF card */
make_r7780rp_irq(10); /* On-board ethernet */
}
......@@ -14,10 +14,12 @@
#include <linux/io.h>
#include <asm/r7780rp.h>
#ifdef CONFIG_SH_R7780MP
static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
#else
#ifdef CONFIG_SH_R7780RP
static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
#elif defined(CONFIG_SH_R7780MP)
static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
#elif defined(CONFIG_SH_R7785RP)
static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2};
#endif
static void enable_r7780rp_irq(unsigned int irq)
......@@ -40,17 +42,10 @@ static struct irq_chip r7780rp_irq_chip __read_mostly = {
.mask_ack = disable_r7780rp_irq,
};
/*
* Initialize IRQ setting
*/
void __init init_r7780rp_IRQ(void)
void make_r7780rp_irq(unsigned int irq)
{
int i;
for (i = 0; i < 15; i++) {
disable_irq_nosync(i);
set_irq_chip_and_handler_name(i, &r7780rp_irq_chip,
handle_level_irq, "level");
enable_r7780rp_irq(i);
}
disable_irq_nosync(irq);
set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip,
handle_level_irq, "level");
enable_r7780rp_irq(irq);
}
/*
* arch/sh/boards/renesas/r7780rp/setup.c
*
* Renesas Solutions Highlander Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2005 - 2007 Paul Mundt
*
* Renesas Solutions Highlander R7780RP-1 Support.
* This contains support for the R7780RP-1, R7780MP, and R7785RP
* Highlander modules.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
......@@ -18,32 +21,6 @@
#include <asm/clock.h>
#include <asm/io.h>
extern void init_r7780rp_IRQ(void);
static struct resource m66596_usb_host_resources[] = {
[0] = {
.start = 0xa4800000,
.end = 0xa4ffffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 6, /* irq number */
.end = 6,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m66596_usb_host_device = {
.name = "m66596-hcd",
.id = 0,
.dev = {
.dma_mask = NULL, /* don't use dma */
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(m66596_usb_host_resources),
.resource = m66596_usb_host_resources,
};
static struct resource cf_ide_resources[] = {
[0] = {
.start = PA_AREA5_IO + 0x1000,
......@@ -56,10 +33,10 @@ static struct resource cf_ide_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
#ifdef CONFIG_SH_R7780MP
.start = 1,
#else
#ifdef CONFIG_SH_R7780RP
.start = 4,
#else
.start = 1,
#endif
.flags = IORESOURCE_IRQ,
},
......@@ -92,15 +69,18 @@ static struct resource heartbeat_resources[] = {
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
/* R7785RP has a slightly more sensible FPGA.. */
#ifndef CONFIG_SH_R7785RP
.dev = {
.platform_data = heartbeat_bit_pos,
},
#endif
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *r7780rp_devices[] __initdata = {
&m66596_usb_host_device,
&cf_ide_device,
&heartbeat_device,
};
......@@ -110,6 +90,7 @@ static int __init r7780rp_devices_setup(void)
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
device_initcall(r7780rp_devices_setup);
/*
* Platform specific clocks
......@@ -140,22 +121,22 @@ static struct clk *r7780rp_clocks[] = {
static void r7780rp_power_off(void)
{
#ifdef CONFIG_SH_R7780MP
ctrl_outw(0x0001, PA_POFF);
#endif
if (mach_is_r7780mp() || mach_is_r7785rp())
ctrl_outw(0x0001, PA_POFF);
}
/*
* Initialize the board
*/
static void __init r7780rp_setup(char **cmdline_p)
static void __init highlander_setup(char **cmdline_p)
{
u16 ver = ctrl_inw(PA_VERREG);
int i;
device_initcall(r7780rp_devices_setup);
printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
mach_is_r7780rp() ? "R7780RP-1" :
mach_is_r7780mp() ? "R7780MP" :
"R7785RP");
printk(KERN_INFO "Board version: %d (revision %d), "
"FPGA version: %d (revision %d)\n",
......@@ -173,9 +154,10 @@ static void __init r7780rp_setup(char **cmdline_p)
}
ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
#ifndef CONFIG_SH_R7780MP
ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
#endif
if (mach_is_r7780rp())
ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
pm_power_off = r7780rp_power_off;
......@@ -184,10 +166,10 @@ static void __init r7780rp_setup(char **cmdline_p)
/*
* The Machine Vector
*/
struct sh_machine_vector mv_r7780rp __initmv = {
.mv_name = "Highlander R7780RP-1",
.mv_setup = r7780rp_setup,
struct sh_machine_vector mv_highlander __initmv = {
.mv_name = "Highlander",
.mv_nr_irqs = 109,
.mv_init_irq = init_r7780rp_IRQ,
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
};
ALIAS_MV(r7780rp)
ALIAS_MV(highlander)
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc3
# Mon Mar 12 14:26:33 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
# CONFIG_SH_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_HP6XX is not set
# CONFIG_SH_SATURN is not set
# CONFIG_SH_DREAMCAST is not set
# CONFIG_SH_MPC1211 is not set
# CONFIG_SH_SH03 is not set
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_7710VOIPGW is not set
# CONFIG_SH_RTS7751R2D is not set
CONFIG_SH_HIGHLANDER=y
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set
# CONFIG_SH_7206_SOLUTION_ENGINE is not set
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
# CONFIG_SH_UNKNOWN is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_R7780MP is not set
CONFIG_SH_R7785RP=y
#
# Processor selection
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
#
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
#
# SH-2A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
#
# SH-3 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
#
# SH-4 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
#
# ST40 Processor Support
#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
#
# SH-4A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
#
# SH4AL-DSP Processor Support
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
CONFIG_32BIT=y
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
CONFIG_NO_IDLE_HZ=y
CONFIG_SH_PCLK_FREQ=50000000
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# DMA support
#
# CONFIG_SH_DMA is not set
#
# Companion Chips
#
# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
#
CONFIG_HEARTBEAT=y
CONFIG_PUSH_SWITCH=y
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# Bus options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options (EXPERIMENTAL)
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_OBSOLETE_OSS is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SH=y
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_4KSTACKS is not set
# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
source "arch/sh/drivers/dma/Kconfig"
source "arch/sh/cchips/Kconfig"
menu "Additional SuperH Device Drivers"
config HEARTBEAT
bool "Heartbeat LED"
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
config PUSH_SWITCH
tristate "Push switch support"
help
......
......@@ -8,12 +8,13 @@ obj-$(CONFIG_PCI_AUTO) += pci-auto.o
obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
dma-dreamcast.o
obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o
obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o
obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o
obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o
obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o
obj-$(CONFIG_SH_TITAN) += ops-titan.o
obj-$(CONFIG_SH_LANDISK) += ops-landisk.o
......@@ -17,18 +17,35 @@
#include <asm/io.h>
#include "pci-sh4.h"
static char r7780rp_irq_tab[] __initdata = {
0, 1, 2, 3,
};
static char r7780mp_irq_tab[] __initdata = {
65, 66, 67, 68,
};
static char r7785rp_irq_tab[][4] __initdata = {
{ 65, 66, 67, 68 }, /* INT ABCD */
{ 66, 67, 68, 65 }, /* INT BCDA */
{ 67, 68, 65, 66 }, /* INT CDAB */
{ 68, 65, 66, 67 }, /* INT DABC */
{ 64, 64, 64, 64 }, /* PCI Host */
};
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
switch (slot) {
case 0: return IRQ_PCISLOT1; /* PCI Interrupt #1 */
case 1: return IRQ_PCISLOT2; /* PCI Interrupt #2 */
case 2: return IRQ_PCISLOT3; /* PCI Interrupt #3 */
case 3: return IRQ_PCISLOT4; /* PCI Interrupt E4 */
default:
printk(KERN_ERR "PCI: Bad IRQ mapping "
"request for slot %d, func %d\n", slot, pin-1);
return -1;
}
if (mach_is_r7780rp())
return r7780rp_irq_tab[slot];
if (mach_is_r7780mp())
return r7780mp_irq_tab[slot];
if (mach_is_r7785rp())
return r7785rp_irq_tab[slot][pin];
printk(KERN_ERR "PCI: Bad IRQ mapping "
"request for slot %d, func %d\n", slot, pin-1);
return -1;
}
static struct resource sh7780_io_resource = {
......
#ifndef __PCI_SH4_H
#define __PCI_SH4_H
#ifdef CONFIG_CPU_SUBTYPE_SH7780
#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
#include "pci-sh7780.h"
#else
#include "pci-sh7751.h"
......
......@@ -48,7 +48,7 @@
static int __init sh7780_pci_init(void)
{
unsigned int id;
int ret;
int ret, match = 0;
pr_debug("PCI: Starting intialization.\n");
......@@ -56,8 +56,17 @@ static int __init sh7780_pci_init(void)
/* check for SH7780/SH7780R hardware */
id = pci_read_reg(SH7780_PCIVID);
if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
(id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
if ((id & 0xffff) == SH7780_VENDOR_ID) {
switch ((id >> 16) & 0xffff) {
case SH7780_DEVICE_ID:
case SH7781_DEVICE_ID:
case SH7785_DEVICE_ID:
match = 1;
break;
}
}
if (unlikely(!match)) {
printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
return -ENODEV;
}
......@@ -138,7 +147,7 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
* DMA interrupts...
*/
#ifdef CONFIG_SH_R7780RP
#ifdef CONFIG_SH_HIGHLANDER
pci_fixup_pcic();
#endif
......
......@@ -14,8 +14,9 @@
/* Platform Specific Values */
#define SH7780_VENDOR_ID 0x1912
#define SH7780_DEVICE_ID 0x0002
#define SH7781_DEVICE_ID 0x0001
#define SH7780_DEVICE_ID 0x0002
#define SH7785_DEVICE_ID 0x0007
/* SH7780 Control Registers */
#define SH7780_PCI_VCR0 0xFE000000
......
......@@ -18,7 +18,8 @@
#define INTC2_BASE 0xfe080000
#define INTC2_INTMSK (INTC2_BASE + 0x40)
#define INTC2_INTMSKCLR (INTC2_BASE + 0x60)
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define INTC2_BASE 0xffd40000
#define INTC2_INTMSK (INTC2_BASE + 0x38)
#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c)
......
......@@ -124,6 +124,14 @@ int __init detect_cpu_and_cache_system(void)
current_cpu_data.dcache.ways = 4;
current_cpu_data.flags |= CPU_HAS_LLSC;
break;
case 0x3004:
case 0x3007:
current_cpu_data.type = CPU_SH7785;
current_cpu_data.icache.ways = 4;
current_cpu_data.dcache.ways = 4;
current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
CPU_HAS_LLSC;
break;
case 0x3008:
if (prr == 0xa0) {
current_cpu_data.type = CPU_SH7722;
......
......@@ -5,6 +5,7 @@
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
......@@ -13,6 +14,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7343.o
......
/*
* arch/sh/kernel/cpu/sh4a/clock-sh7785.c
*
* SH7785 support for the clock framework
*
* Copyright (C) 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/clock.h>
#include <asm/freq.h>
#include <asm/io.h>
static int ifc_divisors[] = { 1, 2, 4, 6 };
static int ufc_divisors[] = { 1, 1, 4, 6 };
static int sfc_divisors[] = { 1, 1, 4, 6 };
static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18,
24, 32, 36, 48, 1, 1, 1, 1 };
static int mfc_divisors[] = { 1, 1, 4, 6 };
static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18,
24, 32, 36, 48, 1, 1, 1, 1 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= 36;
}
static struct clk_ops sh7785_master_clk_ops = {
.init = master_clk_init,
};
static void module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQMR1) & 0x000f);
clk->rate = clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7785_module_clk_ops = {
.recalc = module_clk_recalc,
};
static void bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
clk->rate = clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops sh7785_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
static void cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
clk->rate = clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7785_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
static struct clk_ops *sh7785_clk_ops[] = {
&sh7785_master_clk_ops,
&sh7785_module_clk_ops,
&sh7785_bus_clk_ops,
&sh7785_cpu_clk_ops,
};
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (idx < ARRAY_SIZE(sh7785_clk_ops))
*ops = sh7785_clk_ops[idx];
}
static void shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
clk->rate = clk->parent->rate / sfc_divisors[idx];
}
static struct clk_ops sh7785_shyway_clk_ops = {
.recalc = shyway_clk_recalc,
};
static struct clk sh7785_shyway_clk = {
.name = "shyway_clk",
.flags = CLK_ALWAYS_ENABLED,
.ops = &sh7785_shyway_clk_ops,
};
static void ddr_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
clk->rate = clk->parent->rate / mfc_divisors[idx];
}
static struct clk_ops sh7785_ddr_clk_ops = {
.recalc = ddr_clk_recalc,
};
static struct clk sh7785_ddr_clk = {
.name = "ddr_clk",
.flags = CLK_ALWAYS_ENABLED,
.ops = &sh7785_ddr_clk_ops,
};
static void ram_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 24) & 0x0003);
clk->rate = clk->parent->rate / ufc_divisors[idx];
}
static struct clk_ops sh7785_ram_clk_ops = {
.recalc = ram_clk_recalc,
};
static struct clk sh7785_ram_clk = {
.name = "ram_clk",
.flags = CLK_ALWAYS_ENABLED,
.ops = &sh7785_ram_clk_ops,
};
/*
* Additional SH7785-specific on-chip clocks that aren't already part of the
* clock framework
*/
static struct clk *sh7785_onchip_clocks[] = {
&sh7785_shyway_clk,
&sh7785_ddr_clk,
&sh7785_ram_clk,
};
static int __init sh7785_clk_init(void)
{
struct clk *clk = clk_get(NULL, "master_clk");
int i;
for (i = 0; i < ARRAY_SIZE(sh7785_onchip_clocks); i++) {
struct clk *clkp = sh7785_onchip_clocks[i];
clkp->parent = clk;
clk_register(clkp);
clk_enable(clkp);
}
/*
* Now that we have the rest of the clocks registered, we need to
* force the parent clock to propagate so that these clocks will
* automatically figure out their rate. We cheat by handing the
* parent clock its current rate and forcing child propagation.
*/
clk_set_rate(clk, clk_get_rate(clk));
clk_put(clk);
return 0;
}
arch_initcall(sh7785_clk_init);
/*
* SH7785 Setup
*
* Copyright (C) 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffea0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 40, 41, 43, 42 },
}, {
.mapbase = 0xffeb0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 44, 45, 47, 46 },
},
/*
* The rest of these all have multiplexed IRQs
*/
{
.mapbase = 0xffec0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 60, 60, 60, 60 },
}, {
.mapbase = 0xffed0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 61, 61, 61, 61 },
}, {
.mapbase = 0xffee0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 62, 62, 62, 62 },
}, {
.mapbase = 0xffef0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 63, 63, 63, 63 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7785_devices[] __initdata = {
&sci_device,
};
static int __init sh7785_devices_setup(void)
{
return platform_add_devices(sh7785_devices,
ARRAY_SIZE(sh7785_devices));
}
__initcall(sh7785_devices_setup);
static struct intc2_data intc2_irq_table[] = {
{ 28, 0, 24, 0, 0, 2 }, /* TMU0 */
{ 40, 8, 24, 0, 3, 3 }, /* SCIF0 ERI */
{ 41, 8, 24, 0, 3, 3 }, /* SCIF0 RXI */
{ 42, 8, 24, 0, 3, 3 }, /* SCIF0 BRI */
{ 43, 8, 24, 0, 3, 3 }, /* SCIF0 TXI */
{ 76, 8, 16, 0, 4, 3 }, /* SCIF1 ERI */
{ 77, 8, 16, 0, 4, 3 }, /* SCIF1 RXI */
{ 78, 8, 16, 0, 4, 3 }, /* SCIF1 BRI */
{ 79, 8, 16, 0, 4, 3 }, /* SCIF1 TXI */
{ 64, 0x14, 8, 0, 14, 2 }, /* PCIC0 */
{ 65, 0x14, 0, 0, 15, 2 }, /* PCIC1 */
{ 66, 0x18, 24, 0, 16, 2 }, /* PCIC2 */
{ 67, 0x18, 16, 0, 17, 2 }, /* PCIC3 */
{ 68, 0x18, 8, 0, 18, 2 }, /* PCIC4 */
};
void __init init_IRQ_intc2(void)
{
make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
}
......@@ -148,7 +148,9 @@ static int tmu_timer_init(void)
/* Start TMU0 */
tmu_timer_stop();
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
!defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
......
......@@ -26,6 +26,7 @@ SH03 SH_SH03
LANDISK SH_LANDISK
R7780RP SH_R7780RP
R7780MP SH_R7780MP
R7785RP SH_R7785RP
TITAN SH_TITAN
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW
......
......@@ -62,7 +62,7 @@ struct sci_port {
unsigned int type;
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
unsigned int irqs[SCIx_NR_IRQS];
unsigned int irqs[SCIx_NR_IRQS];
/* Port pin configuration */
void (*init_pins)(struct uart_port *port,
......@@ -351,7 +351,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
/* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
......@@ -361,7 +361,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
}
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
static inline int scif_txroom(struct uart_port *port)
{
return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
......@@ -1368,9 +1370,19 @@ static int __devinit sci_probe(struct platform_device *dev)
struct plat_sci_port *p = dev->dev.platform_data;
int i;
for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) {
for (i = 0; p && p->flags != 0; p++, i++) {
struct sci_port *sciport = &sci_ports[i];
/* Sanity check */
if (unlikely(i == SCI_NPORTS)) {
dev_notice(&dev->dev, "Attempting to register port "
"%d when only %d are available.\n",
i+1, SCI_NPORTS);
dev_notice(&dev->dev, "Consider bumping "
"CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
break;
}
sciport->port.mapbase = p->mapbase;
/*
......
......@@ -140,6 +140,16 @@
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
# define SCSPTR2 0xffec0024 /* 16 bit SCIF */
# define SCSPTR3 0xffed0024 /* 16 bit SCIF */
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_OPER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
......@@ -163,7 +173,10 @@
#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
#define SCI_CTRL_FLAGS_TE 0x20 /* all */
#define SCI_CTRL_FLAGS_RE 0x10 /* all */
#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7780)
#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#else
#define SCI_CTRL_FLAGS_REIE 0
......@@ -385,7 +398,9 @@ SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8)
SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8)
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
......@@ -576,6 +591,23 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffea0000)
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffeb0000)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffec0000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffed0000)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffee0000)
return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffef0000)
return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
static inline int sci_rxd_in(struct uart_port *port)
{
......@@ -634,7 +666,9 @@ static inline int sci_rxd_in(struct uart_port *port)
* -- Mitch Davis - 15 Jul 2000
*/
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7780)
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
......
......@@ -14,6 +14,10 @@
#define FRQCR 0xa4150000
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
#define FRQCR0 0xffc80000
#define FRQCR1 0xffc80004
#define FRQMR1 0xffc80014
#else
#define FRQCR 0xffc00000
#endif
......
......@@ -35,7 +35,7 @@ extern struct pci_channel board_pci_channels[];
/*
* I/O routine helpers
*/
#ifdef CONFIG_CPU_SUBTYPE_SH7780
#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
#define PCI_IO_AREA 0xFE400000
#define PCI_IO_SIZE 0x00400000
#else
......
#ifndef __ASM_SH_RENESAS_R7780RP_H
#define __ASM_SH_RENESAS_R7780RP_H
/*
* linux/include/asm-sh/r7780rp.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Solutions Highlander R7780RP support
*/
/* Box specific addresses. */
#if defined(CONFIG_SH_R7780MP)
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_SDPOW (-1)
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
......@@ -70,18 +64,12 @@
#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
#define PA_PMR (PA_BCR+0x0900) /* */
#define PA_AX88796L 0xa4100400 /* AX88796L Area */
#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
// #define IRQ_CFINST 0 /* CF Card Insert IRQ */
#define IRQ_TP 2 /* Touch Panel IRQ */
#define IRQ_SCI1 3 /* SCI1 IRQ */
#define IRQ_SCI0 4 /* SCI0 IRQ */
......@@ -95,7 +83,7 @@
#define IRQ_ONETH 13 /* On board Ethernet IRQ */
#define IRQ_PSW 14 /* Push Switch IRQ */
#else /* R7780RP */
#elif defined(CONFIG_SH_R7780RP)
#define PA_BCR 0xa5000000 /* FPGA */
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
......@@ -163,7 +151,55 @@
#define IRQ_PSW 13 /* Push Switch IRQ */
#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */
#endif /* CONFIG_SH_R7780MP */
#elif defined(CONFIG_SH_R7785RP)
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_SDPOW (-1)
#define PA_PCISCR (PA_BCR+0x0000)
#define PA_IRLPRA (PA_BCR+0x0002)
#define PA_IRLPRB (PA_BCR+0x0004)
#define PA_IRLPRC (PA_BCR+0x0006)
#define PA_IRLPRD (PA_BCR+0x0008)
#define IRLCNTR1 (PA_BCR+0x0010)
#define PA_IRLPRE (PA_BCR+0x000a)
#define PA_IRLPRF (PA_BCR+0x000c)
#define PA_EXIRLCR (PA_BCR+0x000e)
#define PA_IRLMCR1 (PA_BCR+0x0010)
#define PA_IRLMCR2 (PA_BCR+0x0012)
#define PA_IRLSSR1 (PA_BCR+0x0014)
#define PA_IRLSSR2 (PA_BCR+0x0016)
#define PA_CFTCR (PA_BCR+0x0100)
#define PA_CFPCR (PA_BCR+0x0102)
#define PA_PCICR (PA_BCR+0x0110)
#define PA_IVDRCTL (PA_BCR+0x0112)
#define PA_IVDRSR (PA_BCR+0x0114)
#define PA_PDRSTCR (PA_BCR+0x0116)
#define PA_POFF (PA_BCR+0x0120)
#define PA_LCDCR (PA_BCR+0x0130)
#define PA_TPCR (PA_BCR+0x0140)
#define PA_TPCKCR (PA_BCR+0x0142)
#define PA_TPRSTR (PA_BCR+0x0144)
#define PA_TPXPDR (PA_BCR+0x0146)
#define PA_TPYPDR (PA_BCR+0x0148)
#define PA_GPIOPFR (PA_BCR+0x0150)
#define PA_GPIODR (PA_BCR+0x0152)
#define PA_OBLED (PA_BCR+0x0154)
#define PA_SWSR (PA_BCR+0x0156)
#define PA_VERREG (PA_BCR+0x0158)
#define PA_SMCR (PA_BCR+0x0200)
#define PA_SMSMADR (PA_BCR+0x0202)
#define PA_SMMR (PA_BCR+0x0204)
#define PA_SMSADR1 (PA_BCR+0x0206)
#define PA_SMSADR32 (PA_BCR+0x0244)
#define PA_SMTRDR1 (PA_BCR+0x0246)
#define PA_SMTRDR16 (PA_BCR+0x0264)
#define PA_CU3MDR (PA_BCR+0x0300)
#define PA_CU5MDR (PA_BCR+0x0302)
#define PA_MMSR (PA_BCR+0x0400)
#endif
void make_r7780rp_irq(unsigned int irq);
void highlander_init_irq(void);
#define __IO_PREFIX r7780rp
#include <asm/io_generic.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment