Commit 32bb477f authored by Kumaravel Thiagarajan's avatar Kumaravel Thiagarajan Committed by Greg Kroah-Hartman

serial: 8250_pci1xxxx: Add driver for quad-uart support

pci1xxxx is a PCIe switch with a multi-function endpoint on one of
its downstream ports. Quad-uart is one of the functions in the
multi-function endpoint. This driver loads for the quad-uart and
enumerates single or multiple instances of uart based on the PCIe
subsystem device ID.
Co-developed-by: default avatarTharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Signed-off-by: default avatarTharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Signed-off-by: default avatarKumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230207164814.3104605-3-kumaravel.thiagarajan@microchip.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0348386d
...@@ -13799,6 +13799,13 @@ L: linux-i2c@vger.kernel.org ...@@ -13799,6 +13799,13 @@ L: linux-i2c@vger.kernel.org
S: Maintained S: Maintained
F: drivers/i2c/busses/i2c-mchp-pci1xxxx.c F: drivers/i2c/busses/i2c-mchp-pci1xxxx.c
MICROCHIP PCIe UART DRIVER
M: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
M: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/8250/8250_pci1xxxx.c
MICROCHIP PWM DRIVER MICROCHIP PWM DRIVER
M: Claudiu Beznea <claudiu.beznea@microchip.com> M: Claudiu Beznea <claudiu.beznea@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
// SPDX-License-Identifier: GPL-2.0
/*
* Probe module for 8250/16550-type MCHP PCI serial ports.
*
* Based on drivers/tty/serial/8250/8250_pci.c,
*
* Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved.
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/units.h>
#include <linux/tty.h>
#include <asm/byteorder.h>
#include "8250.h"
#include "8250_pcilib.h"
#define PCI_DEVICE_ID_EFAR_PCI12000 0xa002
#define PCI_DEVICE_ID_EFAR_PCI11010 0xa012
#define PCI_DEVICE_ID_EFAR_PCI11101 0xa022
#define PCI_DEVICE_ID_EFAR_PCI11400 0xa032
#define PCI_DEVICE_ID_EFAR_PCI11414 0xa042
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p 0x0001
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012 0x0002
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013 0x0003
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023 0x0004
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123 0x0005
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01 0x0006
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02 0x0007
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03 0x0008
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12 0x0009
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13 0x000a
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23 0x000b
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0 0x000c
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1 0x000d
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2 0x000e
#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 0x000f
#define PCI_SUBDEVICE_ID_EFAR_PCI12000 PCI_DEVICE_ID_EFAR_PCI12000
#define PCI_SUBDEVICE_ID_EFAR_PCI11010 PCI_DEVICE_ID_EFAR_PCI11010
#define PCI_SUBDEVICE_ID_EFAR_PCI11101 PCI_DEVICE_ID_EFAR_PCI11101
#define PCI_SUBDEVICE_ID_EFAR_PCI11400 PCI_DEVICE_ID_EFAR_PCI11400
#define PCI_SUBDEVICE_ID_EFAR_PCI11414 PCI_DEVICE_ID_EFAR_PCI11414
#define UART_ACTV_REG 0x11
#define UART_BLOCK_SET_ACTIVE BIT(0)
#define UART_PCI_CTRL_REG 0x80
#define UART_PCI_CTRL_SET_MULTIPLE_MSI BIT(4)
#define UART_PCI_CTRL_D3_CLK_ENABLE BIT(0)
#define ADCL_CFG_REG 0x40
#define ADCL_CFG_POL_SEL BIT(2)
#define ADCL_CFG_PIN_SEL BIT(1)
#define ADCL_CFG_EN BIT(0)
#define UART_BIT_SAMPLE_CNT 16
#define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8)
#define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8)
#define UART_CLOCK_DEFAULT (62500 * HZ_PER_KHZ)
#define UART_WAKE_REG 0x8C
#define UART_WAKE_MASK_REG 0x90
#define UART_WAKE_N_PIN BIT(2)
#define UART_WAKE_NCTS BIT(1)
#define UART_WAKE_INT BIT(0)
#define UART_WAKE_SRCS \
(UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT)
#define UART_BAUD_CLK_DIVISOR_REG 0x54
#define UART_RESET_REG 0x94
#define UART_RESET_D3_RESET_DISABLE BIT(16)
#define MAX_PORTS 4
#define PORT_OFFSET 0x100
static const int logical_to_physical_port_idx[][MAX_PORTS] = {
{0, 1, 2, 3}, /* PCI12000, PCI11010, PCI11101, PCI11400, PCI11414 */
{0, 1, 2, 3}, /* PCI4p */
{0, 1, 2, -1}, /* PCI3p012 */
{0, 1, 3, -1}, /* PCI3p013 */
{0, 2, 3, -1}, /* PCI3p023 */
{1, 2, 3, -1}, /* PCI3p123 */
{0, 1, -1, -1}, /* PCI2p01 */
{0, 2, -1, -1}, /* PCI2p02 */
{0, 3, -1, -1}, /* PCI2p03 */
{1, 2, -1, -1}, /* PCI2p12 */
{1, 3, -1, -1}, /* PCI2p13 */
{2, 3, -1, -1}, /* PCI2p23 */
{0, -1, -1, -1}, /* PCI1p0 */
{1, -1, -1, -1}, /* PCI1p1 */
{2, -1, -1, -1}, /* PCI1p2 */
{3, -1, -1, -1}, /* PCI1p3 */
};
struct pci1xxxx_8250 {
unsigned int nr;
void __iomem *membase;
int line[];
};
static int pci1xxxx_get_num_ports(struct pci_dev *dev)
{
switch (dev->subsystem_device) {
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3:
case PCI_SUBDEVICE_ID_EFAR_PCI12000:
case PCI_SUBDEVICE_ID_EFAR_PCI11010:
case PCI_SUBDEVICE_ID_EFAR_PCI11101:
case PCI_SUBDEVICE_ID_EFAR_PCI11400:
default:
return 1;
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23:
return 2;
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013:
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023:
return 3;
case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p:
case PCI_SUBDEVICE_ID_EFAR_PCI11414:
return 4;
}
}
static unsigned int pci1xxxx_get_divisor(struct uart_port *port,
unsigned int baud, unsigned int *frac)
{
unsigned int quot;
/*
* Calculate baud rate sampling period in nanoseconds.
* Fractional part x denotes x/255 parts of a nanosecond.
*/
quot = NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT);
*frac = (NSEC_PER_SEC - quot * baud * UART_BIT_SAMPLE_CNT) *
255 / UART_BIT_SAMPLE_CNT / baud;
return quot;
}
static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud,
unsigned int quot, unsigned int frac)
{
writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac,
port->membase + UART_BAUD_CLK_DIVISOR_REG);
}
static int pci1xxxx_setup(struct pci_dev *pdev,
struct uart_8250_port *port, int port_idx)
{
int ret;
port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST;
port->port.type = PORT_MCHP16550A;
port->port.set_termios = serial8250_do_set_termios;
port->port.get_divisor = pci1xxxx_get_divisor;
port->port.set_divisor = pci1xxxx_set_divisor;
ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0);
if (ret < 0)
return ret;
writeb(UART_BLOCK_SET_ACTIVE, port->port.membase + UART_ACTV_REG);
writeb(UART_WAKE_SRCS, port->port.membase + UART_WAKE_REG);
writeb(UART_WAKE_N_PIN, port->port.membase + UART_WAKE_MASK_REG);
return 0;
}
static unsigned int pci1xxxx_get_max_port(int subsys_dev)
{
unsigned int i = MAX_PORTS;
if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx))
while (i--) {
if (logical_to_physical_port_idx[subsys_dev][i] != -1)
return logical_to_physical_port_idx[subsys_dev][i] + 1;
}
if (subsys_dev == PCI_SUBDEVICE_ID_EFAR_PCI11414)
return 4;
return 1;
}
static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
{
if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx))
return logical_to_physical_port_idx[subsys_dev][port];
return logical_to_physical_port_idx[0][port];
}
static int pci1xxxx_serial_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct device *dev = &pdev->dev;
struct pci1xxxx_8250 *priv;
struct uart_8250_port uart;
unsigned int max_vec_reqd;
unsigned int nr_ports, i;
int num_vectors;
int subsys_dev;
int port_idx;
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
nr_ports = pci1xxxx_get_num_ports(pdev);
priv = devm_kzalloc(dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->membase = pci_ioremap_bar(pdev, 0);
if (!priv->membase)
return -ENOMEM;
pci_set_master(pdev);
priv->nr = nr_ports;
subsys_dev = pdev->subsystem_device;
max_vec_reqd = pci1xxxx_get_max_port(subsys_dev);
num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd, PCI_IRQ_ALL_TYPES);
if (num_vectors < 0) {
pci_iounmap(pdev, priv->membase);
return num_vectors;
}
memset(&uart, 0, sizeof(uart));
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
uart.port.uartclk = UART_CLOCK_DEFAULT;
uart.port.dev = dev;
if (num_vectors == max_vec_reqd)
writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI, priv->membase + UART_PCI_CTRL_REG);
for (i = 0; i < nr_ports; i++) {
priv->line[i] = -ENODEV;
port_idx = pci1xxxx_logical_to_physical_port_translate(subsys_dev, i);
if (num_vectors == max_vec_reqd)
uart.port.irq = pci_irq_vector(pdev, port_idx);
else
uart.port.irq = pci_irq_vector(pdev, 0);
rc = pci1xxxx_setup(pdev, &uart, port_idx);
if (rc) {
dev_warn(dev, "Failed to setup port %u\n", i);
continue;
}
priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
dev_warn(dev,
"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
uart.port.iobase, uart.port.irq, uart.port.iotype,
priv->line[i]);
}
}
pci_set_drvdata(pdev, priv);
return 0;
}
static void pci1xxxx_serial_remove(struct pci_dev *dev)
{
struct pci1xxxx_8250 *priv = pci_get_drvdata(dev);
unsigned int i;
for (i = 0; i < priv->nr; i++) {
if (priv->line[i] >= 0)
serial8250_unregister_port(priv->line[i]);
}
pci_free_irq_vectors(dev);
pci_iounmap(dev, priv->membase);
}
static const struct pci_device_id pci1xxxx_pci_tbl[] = {
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11010) },
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11101) },
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11400) },
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11414) },
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI12000) },
{}
};
MODULE_DEVICE_TABLE(pci, pci1xxxx_pci_tbl);
static struct pci_driver pci1xxxx_pci_driver = {
.name = "pci1xxxx serial",
.probe = pci1xxxx_serial_probe,
.remove = pci1xxxx_serial_remove,
.id_table = pci1xxxx_pci_tbl,
};
module_pci_driver(pci1xxxx_pci_driver);
static_assert((ARRAY_SIZE(logical_to_physical_port_idx) == PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 + 1));
MODULE_IMPORT_NS(SERIAL_8250_PCI);
MODULE_DESCRIPTION("Microchip Technology Inc. PCIe to UART module");
MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
MODULE_AUTHOR("Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>");
MODULE_LICENSE("GPL");
...@@ -313,6 +313,14 @@ static const struct serial8250_config uart_config[] = { ...@@ -313,6 +313,14 @@ static const struct serial8250_config uart_config[] = {
.rxtrig_bytes = {1, 4, 8, 14}, .rxtrig_bytes = {1, 4, 8, 14},
.flags = UART_CAP_FIFO, .flags = UART_CAP_FIFO,
}, },
[PORT_MCHP16550A] = {
.name = "MCHP16550A",
.fifo_size = 256,
.tx_loadsz = 256,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
.rxtrig_bytes = {2, 66, 130, 194},
.flags = UART_CAP_FIFO,
},
}; };
/* Uart divisor latch read */ /* Uart divisor latch read */
......
...@@ -295,6 +295,17 @@ config SERIAL_8250_HUB6 ...@@ -295,6 +295,17 @@ config SERIAL_8250_HUB6
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called 8250_hub6. will be called 8250_hub6.
config SERIAL_8250_PCI1XXXX
tristate "Microchip 8250 based serial port"
depends on SERIAL_8250 && PCI
select SERIAL_8250_PCILIB
default SERIAL_8250
help
Select this option if you have a setup with Microchip PCIe
Switch with serial port enabled and wish to enable 8250
serial driver for the serial interface. This driver support
will ensure to support baud rates upto 1.5Mpbs.
# #
# Misc. options/drivers. # Misc. options/drivers.
# #
......
...@@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o ...@@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_PCI1XXXX) += 8250_pci1xxxx.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DFL) += 8250_dfl.o obj-$(CONFIG_SERIAL_8250_DFL) += 8250_dfl.o
......
...@@ -207,6 +207,9 @@ ...@@ -207,6 +207,9 @@
/* Atheros AR933X SoC */ /* Atheros AR933X SoC */
#define PORT_AR933X 99 #define PORT_AR933X 99
/* MCHP 16550A UART with 256 byte FIFOs */
#define PORT_MCHP16550A 100
/* ARC (Synopsys) on-chip UART */ /* ARC (Synopsys) on-chip UART */
#define PORT_ARC 101 #define PORT_ARC 101
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment