Commit 3305642d authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson

arm64: dts: qcom: msm8916-huawei-g7: Add sensors

The Huawei Ascend G7 has 3 sensors, all supported by existing kernel drivers:

  1. Kionix KX023-1025 accelerometer (kxcjk-1023)
  2. Asahi Kasei AK09911 magnetometer (ak8975)
  3. Avago APDS9930 proximity/light sensor (tsl2772)

Add them to the huawei-g7 device tree.
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210514104328.18756-3-stephan@gerhold.netSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 918f24ae
...@@ -85,6 +85,58 @@ usb_id: usb-id { ...@@ -85,6 +85,58 @@ usb_id: usb-id {
}; };
}; };
&blsp_i2c2 {
status = "okay";
magnetometer@c {
compatible = "asahi-kasei,ak09911";
reg = <0x0c>;
vdd-supply = <&pm8916_l17>;
vid-supply = <&pm8916_l6>;
reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mag_reset_default>;
};
accelerometer@1e {
compatible = "kionix,kx023-1025";
reg = <0x1e>;
interrupt-parent = <&msmgpio>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
pinctrl-names = "default";
pinctrl-0 = <&accel_irq_default>;
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "1";
};
proximity@39 {
compatible = "avago,apds9930";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
led-max-microamp = <100000>;
amstaos,proximity-diodes = <1>;
pinctrl-names = "default";
pinctrl-0 = <&prox_irq_default>;
};
};
&blsp_i2c5 { &blsp_i2c5 {
status = "okay"; status = "okay";
...@@ -278,6 +330,14 @@ l18 { ...@@ -278,6 +330,14 @@ l18 {
}; };
&msmgpio { &msmgpio {
accel_irq_default: accel-irq-default {
pins = "gpio115";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default { gpio_keys_default: gpio-keys-default {
pins = "gpio107"; pins = "gpio107";
function = "gpio"; function = "gpio";
...@@ -294,6 +354,22 @@ gpio_leds_default: gpio-leds-default { ...@@ -294,6 +354,22 @@ gpio_leds_default: gpio-leds-default {
bias-disable; bias-disable;
}; };
mag_reset_default: mag-reset-default {
pins = "gpio36";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
prox_irq_default: prox-irq-default {
pins = "gpio113";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdhc2_cd_default: sdhc2-cd-default { sdhc2_cd_default: sdhc2-cd-default {
pins = "gpio56"; pins = "gpio56";
function = "gpio"; function = "gpio";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment