Skip to content

L
linux
Commit 331bbcfc authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Mark Brown
Browse files
Options

spi: remove the older/duplicated bcm53xx driver 

This driver was added by commit 0fc6a323 ("spi: bcm53xx: driver for
SPI controller on Broadcom bcma SoC") back in 2014. It was needed to
provide a minimal support for SPI controller on BCM5301X (AKA Northstar)
devices.

An alternative driver was added by Kamal in commit fa236a7e ("spi:
bcm-qspi: Add Broadcom MSPI driver") 2 years later. It supports the same
hardware but for some reason a new driver has been developed for it.

At this point the new driver supports: more modes, setting a speed,
setting bits per word and uses IRQs instead of polling. DTS file for
BCM5301X has also been updated in the commit 1c8f4065 ("ARM: dts:
BCM5301X: convert to iProc QSPI") - over a year ago.

That explained I see no reason to keep the old driver alive.
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 62bbc864
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 433 deletions
drivers/spi/spi-bcm53xx.c deleted 100644 → 0
View file @ 62bbc864
/*
* Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/bcma/bcma.h>
#include <linux/spi/spi.h>
#include "spi-bcm53xx.h"
#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */
#define BCM53XXSPI_FLASH_WINDOW SZ_32M
/* The longest observed required wait was 19 ms */
#define BCM53XXSPI_SPE_TIMEOUT_MS 80
struct bcm53xxspi {
struct bcma_device *core;
struct spi_master *master;
void __iomem *mmio_base;
bool bspi; /* Boot SPI mode with memory mapping */
};
static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
{
return bcma_read32(b53spi->core, offset);
}
static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
u32 value)
{
bcma_write32(b53spi->core, offset, value);
}
static void bcm53xxspi_disable_bspi(struct bcm53xxspi *b53spi)
{
struct device *dev = &b53spi->core->dev;
unsigned long deadline;
u32 tmp;
if (!b53spi->bspi)
return;
tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
if (tmp & 0x1)
return;
deadline = jiffies + usecs_to_jiffies(200);
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_BUSY_STATUS);
if (!(tmp & 0x1)) {
bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL,
0x1);
ndelay(200);
b53spi->bspi = false;
return;
}
udelay(1);
} while (!time_after_eq(jiffies, deadline));
dev_warn(dev, "Timeout disabling BSPI\n");
}
static void bcm53xxspi_enable_bspi(struct bcm53xxspi *b53spi)
{
u32 tmp;
if (b53spi->bspi)
return;
tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
if (!(tmp & 0x1))
return;
bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, 0x0);
b53spi->bspi = true;
}
static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
{
/* Do some magic calculation based on length and buad. Add 10% and 1. */
return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
}
static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
{
unsigned long deadline;
u32 tmp;
/* SPE bit has to be 0 before we read MSPI STATUS */
deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS);
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
break;
udelay(5);
} while (!time_after_eq(jiffies, deadline));
if (tmp & B53SPI_MSPI_SPCR2_SPE)
goto spi_timeout;
/* Check status */
deadline = jiffies + msecs_to_jiffies(timeout_ms);
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
return 0;
}
cpu_relax();
udelay(100);
} while (!time_after_eq(jiffies, deadline));
spi_timeout:
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
pr_err("Timeout waiting for SPI to be ready!\n");
return -EBUSY;
}
static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
size_t len, bool cont)
{
u32 tmp;
int i;
for (i = 0; i < len; i++) {
/* Transmit Register File MSB */
bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
(unsigned int)w_buf[i]);
}
for (i = 0; i < len; i++) {
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
B53SPI_CDRAM_PCS_DSCK;
if (!cont && i == len - 1)
tmp &= ~B53SPI_CDRAM_CONT;
tmp &= ~0x1;
/* Command Register File */
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
}
/* Set queue pointers */
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
if (cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
/* Start SPI transfer */
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
tmp |= B53SPI_MSPI_SPCR2_SPE;
if (cont)
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
/* Wait for SPI to finish */
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
if (!cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
}
static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
size_t len, bool cont)
{
u32 tmp;
int i;
for (i = 0; i < len; i++) {
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
B53SPI_CDRAM_PCS_DSCK;
if (!cont && i == len - 1)
tmp &= ~B53SPI_CDRAM_CONT;
tmp &= ~0x1;
/* Command Register File */
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
}
/* Set queue pointers */
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
if (cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
/* Start SPI transfer */
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
tmp |= B53SPI_MSPI_SPCR2_SPE;
if (cont)
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
/* Wait for SPI to finish */
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
if (!cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
for (i = 0; i < len; ++i) {
u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
/* Data stored in the transmit register file LSB */
r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
}
}
static int bcm53xxspi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *t)
{
struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
u8 *buf;
size_t left;
bcm53xxspi_disable_bspi(b53spi);
if (t->tx_buf) {
buf = (u8 *)t->tx_buf;
left = t->len;
while (left) {
size_t to_write = min_t(size_t, 16, left);
bool cont = !spi_transfer_is_last(master, t) ||
left - to_write > 0;
bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
left -= to_write;
buf += to_write;
}
}
if (t->rx_buf) {
buf = (u8 *)t->rx_buf;
left = t->len;
while (left) {
size_t to_read = min_t(size_t, 16, left);
bool cont = !spi_transfer_is_last(master, t) ||
left - to_read > 0;
bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
left -= to_read;
buf += to_read;
}
}
return 0;
}
static int bcm53xxspi_flash_read(struct spi_device *spi,
struct spi_flash_read_message *msg)
{
struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master);
int ret = 0;
if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW)
return -EINVAL;
bcm53xxspi_enable_bspi(b53spi);
memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len);
msg->retlen = msg->len;
return ret;
}
/**************************************************
* BCMA
**************************************************/
static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
{},
};
MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
static int bcm53xxspi_bcma_probe(struct bcma_device *core)
{
struct device *dev = &core->dev;
struct bcm53xxspi *b53spi;
struct spi_master *master;
int err;
if (core->bus->drv_cc.core->id.rev != 42) {
pr_err("SPI on SoC with unsupported ChipCommon rev\n");
return -ENOTSUPP;
}
master = spi_alloc_master(dev, sizeof(*b53spi));
if (!master)
return -ENOMEM;
b53spi = spi_master_get_devdata(master);
b53spi->master = master;
b53spi->core = core;
if (core->addr_s[0])
b53spi->mmio_base = devm_ioremap(dev, core->addr_s[0],
BCM53XXSPI_FLASH_WINDOW);
b53spi->bspi = true;
bcm53xxspi_disable_bspi(b53spi);
master->dev.of_node = dev->of_node;
master->transfer_one = bcm53xxspi_transfer_one;
if (b53spi->mmio_base)
master->spi_flash_read = bcm53xxspi_flash_read;
bcma_set_drvdata(core, b53spi);
err = devm_spi_register_master(dev, master);
if (err) {
spi_master_put(master);
bcma_set_drvdata(core, NULL);
return err;
}
return 0;
}
static struct bcma_driver bcm53xxspi_bcma_driver = {
.name = KBUILD_MODNAME,
.id_table = bcm53xxspi_bcma_tbl,
.probe = bcm53xxspi_bcma_probe,
};
/**************************************************
* Init & exit
**************************************************/
static int __init bcm53xxspi_module_init(void)
{
int err = 0;
err = bcma_driver_register(&bcm53xxspi_bcma_driver);
if (err)
pr_err("Failed to register bcma driver: %d\n", err);
return err;
}
static void __exit bcm53xxspi_module_exit(void)
{
bcma_driver_unregister(&bcm53xxspi_bcma_driver);
}
module_init(bcm53xxspi_module_init);
module_exit(bcm53xxspi_module_exit);
MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
MODULE_LICENSE("GPL v2");
drivers/spi/spi-bcm53xx.h deleted 100644 → 0
View file @ 62bbc864
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef SPI_BCM53XX_H
#define SPI_BCM53XX_H
#define B53SPI_BSPI_REVISION_ID 0x000
#define B53SPI_BSPI_SCRATCH 0x004
#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008
#define B53SPI_BSPI_BUSY_STATUS 0x00c
#define B53SPI_BSPI_INTR_STATUS 0x010
#define B53SPI_BSPI_B0_STATUS 0x014
#define B53SPI_BSPI_B0_CTRL 0x018
#define B53SPI_BSPI_B1_STATUS 0x01c
#define B53SPI_BSPI_B1_CTRL 0x020
#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024
#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028
#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c
#define B53SPI_BSPI_BITS_PER_PHASE 0x030
#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034
#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c
#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040
#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044
#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048
#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c
/* RAF */
#define B53SPI_RAF_START_ADDR 0x100
#define B53SPI_RAF_NUM_WORDS 0x104
#define B53SPI_RAF_CTRL 0x108
#define B53SPI_RAF_FULLNESS 0x10c
#define B53SPI_RAF_WATERMARK 0x110
#define B53SPI_RAF_STATUS 0x114
#define B53SPI_RAF_READ_DATA 0x118
#define B53SPI_RAF_WORD_CNT 0x11c
#define B53SPI_RAF_CURR_ADDR 0x120
/* MSPI */
#define B53SPI_MSPI_SPCR0_LSB 0x200
#define B53SPI_MSPI_SPCR0_MSB 0x204
#define B53SPI_MSPI_SPCR1_LSB 0x208
#define B53SPI_MSPI_SPCR1_MSB 0x20c
#define B53SPI_MSPI_NEWQP 0x210
#define B53SPI_MSPI_ENDQP 0x214
#define B53SPI_MSPI_SPCR2 0x218
#define B53SPI_MSPI_SPCR2_SPE 0x00000040
#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
#define B53SPI_MSPI_MSPI_STATUS 0x220
#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001
#define B53SPI_MSPI_CPTQP 0x224
#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */
#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */
#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */
#define B53SPI_CDRAM_PCS_PCS0 0x00000001
#define B53SPI_CDRAM_PCS_PCS1 0x00000002
#define B53SPI_CDRAM_PCS_PCS2 0x00000004
#define B53SPI_CDRAM_PCS_PCS3 0x00000008
#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f
#define B53SPI_CDRAM_PCS_DSCK 0x00000010
#define B53SPI_CDRAM_BITSE 0x00000040
#define B53SPI_CDRAM_CONT 0x00000080
#define B53SPI_MSPI_WRITE_LOCK 0x380
#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384
/* Interrupt */
#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0
#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4
#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8
#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac
#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0
#define B53SPI_INTR_MSPI_DONE 0x3b4
#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
#endif /* SPI_BCM53XX_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7