Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:
 - HID battery handling cleanup by David Herrmann
 - ELO 4000/4500 driver, which has been finally ported to be proper HID
   driver by Jiri Slaby
 - ps3remote driver functionality is now provided by generic sony
   driver, by Jiri Kosina
 - PS2/3 Buzz controllers support, by Colin Leitner
 - rework of wiimote driver including full extensions hotpluggin
   support, sub-device modularization and speaker support by David
   Herrmann

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
  HID: wacom: Intuos4 battery charging changes
  HID: i2c-hid: support sending HID output reports using the output register
  HID: kye: Add report fixup for Genius Gila Gaming mouse
  HID: wiimote: support Nintendo Wii U Pro Controller
  Input: make gamepad API keycodes more clear
  input: document gamepad API and add extra keycodes
  HID: explain out-of-range check better
  HID: fix false positive out of range values
  HID: wiimote: fix coccinelle warnings
  HID: roccat: check cdev_add return value
  HID: fold ps3remote driver into generic Sony driver
  HID: hyperv: convert alloc+memcpy to memdup
  HID: core: fix reporting of raw events
  HID: wiimote: discard invalid EXT data reports
  HID: wiimote: fix classic controller parsing
  HID: wiimote: init EXT/MP during device detection
  HID: wiimote: fix DRM debug-attr to correctly parse input
  HID: wiimote: add MP quirks
  HID: wiimote: remove old static extension support
  HID: wiimote: add "bboard_calib" attribute
  ...

Documentation/ABI/testing/sysfs-driver-hid-wiimote

@@ -12,7 +12,7 @@ Description:	Make it possible to set/get current led state. Reading from it
 What:		/sys/bus/hid/drivers/wiimote/<dev>/extension
 Date:		August 2011
 KernelVersion:	3.2
-Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Contact:	David Herrmann <dh.herrmann@gmail.com>
 Description:	This file contains the currently connected and initialized
 		extensions. It can be one of: none, motionp, nunchuck, classic,
 		motionp+nunchuck, motionp+classic
@@ -20,3 +20,40 @@ Description:	This file contains the currently connected and initialized
 		the official Nintendo Nunchuck extension and classic is the
 		Nintendo Classic Controller extension. The motionp extension can
 		be combined with the other two.
+		Starting with kernel-version 3.11 Motion Plus hotplugging is
+		supported and if detected, it's no longer reported as static
+		extension. You will get uevent notifications for the motion-plus
+		device then.
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/devtype
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	While a device is initialized by the wiimote driver, we perform
+		a device detection and signal a "change" uevent after it is
+		done. This file shows the detected device type. "pending" means
+		that the detection is still ongoing, "unknown" means, that the
+		device couldn't be detected or loaded. "generic" means, that the
+		device couldn't be detected but supports basic Wii Remote
+		features and can be used.
+		Other strings for each device-type are available and may be
+		added if new device-specific detections are added.
+		Currently supported are:
+			gen10: First Wii Remote generation
+			gen20: Second Wii Remote Plus generation (builtin MP)
+			balanceboard: Wii Balance Board
+
+What:		/sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
+Date:		May 2013
+KernelVersion:	3.11
+Contact:	David Herrmann <dh.herrmann@gmail.com>
+Description:	This attribute is only provided if the device was detected as a
+		balance board. It provides a single line with 3 calibration
+		values for all 4 sensors. The values are separated by colons and
+		are each 2 bytes long (encoded as 4 digit hexadecimal value).
+		First, 0kg values for all 4 sensors are written, followed by the
+		17kg values for all 4 sensors and last the 34kg values for all 4
+		sensors.
+		Calibration data is already applied by the kernel to all input
+		values but may be used by user-space to perform other
+		transformations.

drivers/hid/Kconfig

@@ -217,6 +217,13 @@ config HID_ELECOM
 	---help---
 	Support for the ELECOM BM084 (bluetooth mouse).
 
+config HID_ELO
+	tristate "ELO USB 4000/4500 touchscreen"
+	depends on USB_HID
+	---help---
+	Support for the ELO USB 4000/4500 touchscreens. Note that this is for
+	different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+
 config HID_EZKEY
 	tristate "Ezkey BTC 8193 keyboard" if EXPERT
 	depends on HID
@@ -231,6 +238,9 @@ config HID_HOLTEK
 	Support for Holtek based devices:
 	  - Holtek On Line Grip based game controller
 	  - Trust GXT 18 Gaming Keyboard
+	  - Sharkoon Drakonia / Perixx MX-2000 gaming mice
+	  - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
+	    Zalman ZM-GM1
 
 config HOLTEK_FF
 	bool "Holtek On Line Grip force feedback support"
@@ -240,6 +250,12 @@ config HOLTEK_FF
 	  Say Y here if you have a Holtek On Line Grip based game controller
 	  and want to have force feedback support for it.
 
+config HID_HUION
+	tristate "Huion tablets"
+	depends on USB_HID
+	---help---
+	Support for Huion 580 tablet.
+
 config HID_KEYTOUCH
 	tristate "Keytouch HID devices"
 	depends on HID
@@ -561,15 +577,6 @@ config HID_PRIMAX
 	Support for Primax devices that are not fully compliant with the
 	HID standard.
 
-config HID_PS3REMOTE
-	tristate "Sony PS3 BD Remote Control"
-	depends on HID
-	---help---
-	Support for the Sony PS3 Blue-ray Disk Remote Control and Logitech
-	Harmony Adapter for PS3, which connect over Bluetooth.
-
-	Support for the 6-axis controllers is provided by HID_SONY.
-
 config HID_ROCCAT
 	tristate "Roccat device support"
 	depends on USB_HID
@@ -594,12 +601,17 @@ config HID_SAMSUNG
 	Support for Samsung InfraRed remote control or keyboards.
 
 config HID_SONY
-	tristate "Sony PS3 controller"
+	tristate "Sony PS2/3 accessories"
 	depends on USB_HID
+	depends on NEW_LEDS
+	depends on LEDS_CLASS
 	---help---
-	Support for Sony PS3 6-axis controllers.
+	Support for
 
-	Support for the Sony PS3 BD Remote is provided by HID_PS3REMOTE.
+	  * Sony PS3 6-axis controllers
+	  * Buzz controllers
+	  * Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
+	  * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)
 
 config HID_SPEEDLINK
 	tristate "Speedlink VAD Cezanne mouse support"
@@ -707,22 +719,29 @@ config HID_WACOM
 	Support for Wacom Graphire Bluetooth and Intuos4 WL tablets.
 
 config HID_WIIMOTE
-	tristate "Nintendo Wii Remote support"
+	tristate "Nintendo Wii / Wii U peripherals"
 	depends on HID
 	depends on LEDS_CLASS
 	select POWER_SUPPLY
 	select INPUT_FF_MEMLESS
 	---help---
-	Support for the Nintendo Wii Remote bluetooth device.
+	Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
+	devices are the Wii Remote and its extension devices, but also devices
+	based on the Wii Remote like the Wii U Pro Controller or the
+	Wii Balance Board.
 
-config HID_WIIMOTE_EXT
-	bool "Nintendo Wii Remote Extension support"
-	depends on HID_WIIMOTE
-	default HID_WIIMOTE
-	---help---
-	Support for extension controllers of the Nintendo Wii Remote. Say yes
-	here if you want to use the Nintendo Motion+, Nunchuck or Classic
-	extension controllers with your Wii Remote.
+	Support for all official Nintendo extensions is available, however, 3rd
+	party extensions might not be supported. Please report these devices to:
+	  http://github.com/dvdhrm/xwiimote/issues
+
+	Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
+	the Wii U Gamepad) might be supported in the future. But currently
+	support is limited to Bluetooth based devices.
+
+	If unsure, say N.
+
+	To compile this driver as a module, choose M here: the
+	module will be called hid-wiimote.
 
 config HID_ZEROPLUS
 	tristate "Zeroplus based game controller support"

drivers/hid/Makefile

@@ -28,10 +28,7 @@ ifdef CONFIG_LOGIWHEELS_FF
 	hid-logitech-y	+= hid-lg4ff.o
 endif
 
-hid-wiimote-y		:= hid-wiimote-core.o
-ifdef CONFIG_HID_WIIMOTE_EXT
-	hid-wiimote-y	+= hid-wiimote-ext.o
-endif
+hid-wiimote-y		:= hid-wiimote-core.o hid-wiimote-modules.o
 ifdef CONFIG_DEBUG_FS
 	hid-wiimote-y	+= hid-wiimote-debug.o
 endif
@@ -48,10 +45,13 @@ obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
 obj-$(CONFIG_HID_DRAGONRISE)	+= hid-dr.o
 obj-$(CONFIG_HID_EMS_FF)	+= hid-emsff.o
 obj-$(CONFIG_HID_ELECOM)	+= hid-elecom.o
+obj-$(CONFIG_HID_ELO)		+= hid-elo.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-kbd.o
+obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-mouse.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtekff.o
+obj-$(CONFIG_HID_HUION)		+= hid-huion.o
 obj-$(CONFIG_HID_HYPERV_MOUSE)	+= hid-hyperv.o
 obj-$(CONFIG_HID_ICADE)		+= hid-icade.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
@@ -92,7 +92,6 @@ hid-picolcd-y			+= hid-picolcd_debugfs.o
 endif
 
 obj-$(CONFIG_HID_PRIMAX)	+= hid-primax.o
-obj-$(CONFIG_HID_PS3REMOTE)	+= hid-ps3remote.o
 obj-$(CONFIG_HID_ROCCAT)	+= hid-roccat.o hid-roccat-common.o \
 	hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
 	hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \

drivers/hid/hid-core.c

@@ -1293,7 +1293,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
 
 	if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) {
 		ret = hdrv->raw_event(hid, report, data, size);
-		if (ret != 0) {
+		if (ret < 0) {
 			ret = ret < 0 ? ret : 0;
 			goto unlock;
 		}
@@ -1573,6 +1573,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
@@ -1584,10 +1586,14 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
@@ -1680,6 +1686,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) },
@@ -2042,6 +2050,8 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_SPEAK_410) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_SPEAK_510) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) },

drivers/hid/hid-elo.c

+/*
+ * HID driver for ELO usb touchscreen 4000/4500
+ *
+ * Copyright (c) 2013 Jiri Slaby
+ *
+ * Data parsing taken from elousb driver by Vojtech Pavlik.
+ *
+ * This driver is licensed under the terms of GPLv2.
+ */
+
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#include "hid-ids.h"
+
+#define ELO_PERIODIC_READ_INTERVAL	HZ
+#define ELO_SMARTSET_CMD_TIMEOUT	2000 /* msec */
+
+/* Elo SmartSet commands */
+#define ELO_FLUSH_SMARTSET_RESPONSES	0x02 /* Flush all pending smartset responses */
+#define ELO_SEND_SMARTSET_COMMAND	0x05 /* Send a smartset command */
+#define ELO_GET_SMARTSET_RESPONSE	0x06 /* Get a smartset response */
+#define ELO_DIAG			0x64 /* Diagnostics command */
+#define ELO_SMARTSET_PACKET_SIZE	8
+
+struct elo_priv {
+	struct usb_device *usbdev;
+	struct delayed_work work;
+	unsigned char buffer[ELO_SMARTSET_PACKET_SIZE];
+};
+
+static struct workqueue_struct *wq;
+static bool use_fw_quirk = true;
+module_param(use_fw_quirk, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fw_quirk, "Do periodic pokes for broken M firmwares (default = true)");
+
+static void elo_input_configured(struct hid_device *hdev,
+		struct hid_input *hidinput)
+{
+	struct input_dev *input = hidinput->input;
+
+	set_bit(BTN_TOUCH, input->keybit);
+	set_bit(ABS_PRESSURE, input->absbit);
+	input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0);
+}
+
+static void elo_process_data(struct input_dev *input, const u8 *data, int size)
+{
+	int press;
+
+	input_report_abs(input, ABS_X, (data[3] << 8) | data[2]);
+	input_report_abs(input, ABS_Y, (data[5] << 8) | data[4]);
+
+	press = 0;
+	if (data[1] & 0x80)
+		press = (data[7] << 8) | data[6];
+	input_report_abs(input, ABS_PRESSURE, press);
+
+	if (data[1] & 0x03) {
+		input_report_key(input, BTN_TOUCH, 1);
+		input_sync(input);
+	}
+
+	if (data[1] & 0x04)
+		input_report_key(input, BTN_TOUCH, 0);
+
+	input_sync(input);
+}
+
+static int elo_raw_event(struct hid_device *hdev, struct hid_report *report,
+	 u8 *data, int size)
+{
+	struct hid_input *hidinput;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT) || list_empty(&hdev->inputs))
+		return 0;
+
+	hidinput = list_first_entry(&hdev->inputs, struct hid_input, list);
+
+	switch (report->id) {
+	case 0:
+		if (data[0] == 'T') {	/* Mandatory ELO packet marker */
+			elo_process_data(hidinput->input, data, size);
+			return 1;
+		}
+		break;
+	default:	/* unknown report */
+		/* Unknown report type; pass upstream */
+		hid_info(hdev, "unknown report type %d\n", report->id);
+		break;
+	}
+
+	return 0;
+}
+
+static int elo_smartset_send_get(struct usb_device *dev, u8 command,
+		void *data)
+{
+	unsigned int pipe;
+	u8 dir;
+
+	if (command == ELO_SEND_SMARTSET_COMMAND) {
+		pipe = usb_sndctrlpipe(dev, 0);
+		dir = USB_DIR_OUT;
+	} else if (command == ELO_GET_SMARTSET_RESPONSE) {
+		pipe = usb_rcvctrlpipe(dev, 0);
+		dir = USB_DIR_IN;
+	} else
+		return -EINVAL;
+
+	return usb_control_msg(dev, pipe, command,
+			dir | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			0, 0, data, ELO_SMARTSET_PACKET_SIZE,
+			ELO_SMARTSET_CMD_TIMEOUT);
+}
+
+static int elo_flush_smartset_responses(struct usb_device *dev)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			ELO_FLUSH_SMARTSET_RESPONSES,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static void elo_work(struct work_struct *work)
+{
+	struct elo_priv *priv = container_of(work, struct elo_priv, work.work);
+	struct usb_device *dev = priv->usbdev;
+	unsigned char *buffer = priv->buffer;
+	int ret;
+
+	ret = elo_flush_smartset_responses(dev);
+	if (ret < 0) {
+		dev_err(&dev->dev, "initial FLUSH_SMARTSET_RESPONSES failed, error %d\n",
+				ret);
+		goto fail;
+	}
+
+	/* send Diagnostics command */
+	*buffer = ELO_DIAG;
+	ret = elo_smartset_send_get(dev, ELO_SEND_SMARTSET_COMMAND, buffer);
+	if (ret < 0) {
+		dev_err(&dev->dev, "send Diagnostics Command failed, error %d\n",
+				ret);
+		goto fail;
+	}
+
+	/* get the result */
+	ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE, buffer);
+	if (ret < 0) {
+		dev_err(&dev->dev, "get Diagnostics Command response failed, error %d\n",
+				ret);
+		goto fail;
+	}
+
+	/* read the ack */
+	if (*buffer != 'A') {
+		ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE,
+				buffer);
+		if (ret < 0) {
+			dev_err(&dev->dev, "get acknowledge response failed, error %d\n",
+					ret);
+			goto fail;
+		}
+	}
+
+fail:
+	ret = elo_flush_smartset_responses(dev);
+	if (ret < 0)
+		dev_err(&dev->dev, "final FLUSH_SMARTSET_RESPONSES failed, error %d\n",
+				ret);
+	queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
+}
+
+/*
+ * Not all Elo devices need the periodic HID descriptor reads.
+ * Only firmware version M needs this.
+ */
+static bool elo_broken_firmware(struct usb_device *dev)
+{
+	return use_fw_quirk && le16_to_cpu(dev->descriptor.bcdDevice) == 0x10d;
+}
+
+static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	struct elo_priv *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&priv->work, elo_work);
+	priv->usbdev = interface_to_usbdev(to_usb_interface(hdev->dev.parent));
+
+	hid_set_drvdata(hdev, priv);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err_free;
+	}
+
+	if (elo_broken_firmware(priv->usbdev)) {
+		hid_info(hdev, "broken firmware found, installing workaround\n");
+		queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
+	}
+
+	return 0;
+err_free:
+	kfree(priv);
+	return ret;
+}
+
+static void elo_remove(struct hid_device *hdev)
+{
+	struct elo_priv *priv = hid_get_drvdata(hdev);
+
+	hid_hw_stop(hdev);
+	flush_workqueue(wq);
+	kfree(priv);
+}
+
+static const struct hid_device_id elo_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009), },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030), },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, elo_devices);
+
+static struct hid_driver elo_driver = {
+	.name = "elo",
+	.id_table = elo_devices,
+	.probe = elo_probe,
+	.remove = elo_remove,
+	.raw_event = elo_raw_event,
+	.input_configured = elo_input_configured,
+};
+
+static int __init elo_driver_init(void)
+{
+	int ret;
+
+	wq = create_singlethread_workqueue("elousb");
+	if (!wq)
+		return -ENOMEM;
+
+	ret = hid_register_driver(&elo_driver);
+	if (ret)
+		destroy_workqueue(wq);
+
+	return ret;
+}
+module_init(elo_driver_init);
+
+static void __exit elo_driver_exit(void)
+{
+	hid_unregister_driver(&elo_driver);
+	destroy_workqueue(wq);
+}
+module_exit(elo_driver_exit);
+
+MODULE_AUTHOR("Jiri Slaby <jslaby@suse.cz>");
+MODULE_LICENSE("GPL");

drivers/hid/hid-holtek-mouse.c

+/*
+ * HID driver for Holtek gaming mice
+ * Copyright (c) 2013 Christian Ohm
+ * Heavily inspired by various other HID drivers that adjust the report
+ * descriptor.
+*/
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+/*
+ * The report descriptor of some Holtek based gaming mice specifies an
+ * excessively large number of consumer usages (2^15), which is more than
+ * HID_MAX_USAGES. This prevents proper parsing of the report descriptor.
+ *
+ * This driver fixes the report descriptor for:
+ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000
+ * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200
+ *   and Zalman ZM-GM1
+ */
+
+static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
+		/* Change usage maximum and logical maximum from 0x7fff to
+		 * 0x2fff, so they don't exceed HID_MAX_USAGES */
+		switch (hdev->product) {
+		case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067:
+			if (*rsize >= 122 && rdesc[115] == 0xff && rdesc[116] == 0x7f
+					&& rdesc[120] == 0xff && rdesc[121] == 0x7f) {
+				hid_info(hdev, "Fixing up report descriptor\n");
+				rdesc[116] = rdesc[121] = 0x2f;
+			}
+			break;
+		case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A:
+			if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f
+					&& rdesc[111] == 0xff && rdesc[112] == 0x7f) {
+				hid_info(hdev, "Fixing up report descriptor\n");
+				rdesc[107] = rdesc[112] = 0x2f;
+			}
+			break;
+		}
+
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id holtek_mouse_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+			USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+			USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, holtek_mouse_devices);
+
+static struct hid_driver holtek_mouse_driver = {
+	.name = "holtek_mouse",
+	.id_table = holtek_mouse_devices,
+	.report_fixup = holtek_mouse_report_fixup,
+};
+
+module_hid_driver(holtek_mouse_driver);
+MODULE_LICENSE("GPL");

drivers/hid/hid-huion.c

+/*
+ *  HID driver for Huion devices not fully compliant with HID standard
+ *
+ *  Copyright (c) 2013 Martin Rusko
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+
+#include "hid-ids.h"
+
+/* Original Huion 580 report descriptor size */
+#define HUION_580_RDESC_ORIG_SIZE	177
+
+/* Fixed Huion 580 report descriptor */
+static __u8 huion_580_rdesc_fixed[] = {
+	0x05, 0x0D,         /*  Usage Page (Digitizer),             */
+	0x09, 0x02,         /*  Usage (Pen),                        */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x07,         /*      Report ID (7),                  */
+	0x09, 0x20,         /*      Usage (Stylus),                 */
+	0xA0,               /*      Collection (Physical),          */
+	0x14,               /*          Logical Minimum (0),        */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x75, 0x01,         /*          Report Size (1),            */
+	0x09, 0x42,         /*          Usage (Tip Switch),         */
+	0x09, 0x44,         /*          Usage (Barrel Switch),      */
+	0x09, 0x46,         /*          Usage (Tablet Pick),        */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x09, 0x32,         /*          Usage (In Range),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x75, 0x10,         /*          Report Size (16),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0xA4,               /*          Push,                       */
+	0x05, 0x01,         /*          Usage Page (Desktop),       */
+	0x65, 0x13,         /*          Unit (Inch),                */
+	0x55, 0xFD,         /*          Unit Exponent (-3),         */
+	0x34,               /*          Physical Minimum (0),       */
+	0x09, 0x30,         /*          Usage (X),                  */
+	0x46, 0x40, 0x1F,   /*          Physical Maximum (8000),    */
+	0x26, 0x00, 0x7D,   /*          Logical Maximum (32000),    */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x09, 0x31,         /*          Usage (Y),                  */
+	0x46, 0x88, 0x13,   /*          Physical Maximum (5000),    */
+	0x26, 0x20, 0x4E,   /*          Logical Maximum (20000),    */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xB4,               /*          Pop,                        */
+	0x09, 0x30,         /*          Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x07,   /*          Logical Maximum (2047),     */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xC0,               /*      End Collection,                 */
+	0xC0                /*  End Collection                      */
+};
+
+static __u8 *huion_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	switch (hdev->product) {
+	case USB_DEVICE_ID_HUION_580:
+		if (*rsize == HUION_580_RDESC_ORIG_SIZE) {
+			rdesc = huion_580_rdesc_fixed;
+			*rsize = sizeof(huion_580_rdesc_fixed);
+		}
+		break;
+	}
+	return rdesc;
+}
+
+/**
+ * Enable fully-functional tablet mode by reading special string
+ * descriptor.
+ *
+ * @hdev:	HID device
+ *
+ * The specific string descriptor and data were discovered by sniffing
+ * the Windows driver traffic.
+ */
+static int huion_tablet_enable(struct hid_device *hdev)
+{
+	int rc;
+	char buf[22];
+
+	rc = usb_string(hid_to_usb_dev(hdev), 0x64, buf, sizeof(buf));
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int huion_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+	/* Ignore interfaces 1 (mouse) and 2 (keyboard) for Huion 580 tablet,
+	 * as they are not used
+	 */
+	switch (id->product) {
+	case USB_DEVICE_ID_HUION_580:
+		if (intf->cur_altsetting->desc.bInterfaceNumber != 0x00)
+			return -ENODEV;
+		break;
+	}
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err;
+	}
+
+	switch (id->product) {
+	case USB_DEVICE_ID_HUION_580:
+		ret = huion_tablet_enable(hdev);
+		if (ret) {
+			hid_err(hdev, "tablet enabling failed\n");
+			goto enabling_err;
+		}
+		break;
+	}
+
+	return 0;
+enabling_err:
+	hid_hw_stop(hdev);
+err:
+	return ret;
+}
+
+static int huion_raw_event(struct hid_device *hdev, struct hid_report *report,
+			u8 *data, int size)
+{
+	/* If this is a pen input report then invert the in-range bit */
+	if (report->type == HID_INPUT_REPORT && report->id == 0x07 && size >= 2)
+		data[1] ^= 0x40;
+
+	return 0;
+}
+
+static const struct hid_device_id huion_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, huion_devices);
+
+static struct hid_driver huion_driver = {
+	.name = "huion",
+	.id_table = huion_devices,
+	.probe = huion_probe,
+	.report_fixup = huion_report_fixup,
+	.raw_event = huion_raw_event,
+};
+module_hid_driver(huion_driver);
+
+MODULE_AUTHOR("Martin Rusko");
+MODULE_DESCRIPTION("Huion HID driver");
+MODULE_LICENSE("GPL");

drivers/hid/hid-hyperv.c

@@ -199,13 +199,11 @@ static void mousevsc_on_receive_device_info(struct mousevsc_dev *input_device,
 	if (desc->bLength == 0)
 		goto cleanup;
 
-	input_device->hid_desc = kzalloc(desc->bLength, GFP_ATOMIC);
+	input_device->hid_desc = kmemdup(desc, desc->bLength, GFP_ATOMIC);
 
 	if (!input_device->hid_desc)
 		goto cleanup;
 
-	memcpy(input_device->hid_desc, desc, desc->bLength);
-
 	input_device->report_desc_size = desc->desc[0].wDescriptorLength;
 	if (input_device->report_desc_size == 0) {
 		input_device->dev_info_status = -EINVAL;

drivers/hid/hid-ids.h

@@ -248,6 +248,9 @@
 #define USB_DEVICE_ID_CYPRESS_BARCODE_4	0xed81
 #define USB_DEVICE_ID_CYPRESS_TRUETOUCH	0xc001
 
+#define USB_VENDOR_ID_DATA_MODUL	0x7374
+#define USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH	0x1201
+
 #define USB_VENDOR_ID_DEALEXTREAME	0x10c5
 #define USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701	0x819a
 
@@ -272,16 +275,15 @@
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E	0x725e
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262	0x7262
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B	0x726b
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA	0x72aa
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1	0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA	0x72aa
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4	0x72c4
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0	0x72d0
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA	0x72fa
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302	0x7302
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349	0x7349
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7	0x73f7
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001	0xa001
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224      0x7224
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0      0x72d0
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4      0x72c4
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
@@ -425,6 +427,9 @@
 #define USB_DEVICE_ID_UGCI_FLYING	0x0020
 #define USB_DEVICE_ID_UGCI_FIGHTING	0x0030
 
+#define USB_VENDOR_ID_HUION		0x256c
+#define USB_DEVICE_ID_HUION_580		0x006e
+
 #define USB_VENDOR_ID_IDEACOM		0x1cb6
 #define USB_DEVICE_ID_IDEACOM_IDC6650	0x6650
 #define USB_DEVICE_ID_IDEACOM_IDC6651	0x6651
@@ -440,6 +445,8 @@
 
 #define USB_VENDOR_ID_HOLTEK_ALT		0x04d9
 #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD	0xa055
+#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067	0xa067
+#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A	0xa04a
 
 #define USB_VENDOR_ID_IMATION		0x0718
 #define USB_DEVICE_ID_DISC_STAKKA	0xd000
@@ -447,6 +454,10 @@
 #define USB_VENDOR_ID_IRTOUCHSYSTEMS	0x6615
 #define USB_DEVICE_ID_IRTOUCH_INFRARED_USB	0x0070
 
+#define USB_VENDOR_ID_JABRA		0x0b0e
+#define USB_DEVICE_ID_JABRA_SPEAK_410	0x0412
+#define USB_DEVICE_ID_JABRA_SPEAK_510	0x0420
+
 #define USB_VENDOR_ID_JESS		0x0c45
 #define USB_DEVICE_ID_JESS_YUREX	0x1010
 
@@ -467,6 +478,7 @@
 
 #define USB_VENDOR_ID_KYE		0x0458
 #define USB_DEVICE_ID_KYE_ERGO_525V	0x0087
+#define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE	0x0138
 #define USB_DEVICE_ID_KYE_GPEN_560	0x5003
 #define USB_DEVICE_ID_KYE_EASYPEN_I405X	0x5010
 #define USB_DEVICE_ID_KYE_MOUSEPEN_I608X	0x5011
@@ -734,6 +746,8 @@
 #define USB_DEVICE_ID_SONY_PS3_BDREMOTE		0x0306
 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER	0x0268
 #define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER	0x042f
+#define USB_DEVICE_ID_SONY_BUZZ_CONTROLLER		0x0002
+#define USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER	0x1000
 
 #define USB_VENDOR_ID_SOUNDGRAPH	0x15c2
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST	0x0034

drivers/hid/hid-input.c

@@ -354,10 +354,10 @@ static int hidinput_get_battery_property(struct power_supply *psy,
 					      dev->battery_report_type);
 
 		if (ret != 2) {
-			if (ret >= 0)
-				ret = -EINVAL;
+			ret = -ENODATA;
 			break;
 		}
+		ret = 0;
 
 		if (dev->battery_min < dev->battery_max &&
 		    buf[1] >= dev->battery_min &&
@@ -1042,9 +1042,14 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	/*
 	 * Ignore out-of-range values as per HID specification,
-	 * section 5.10 and 6.2.25
+	 * section 5.10 and 6.2.25.
+	 *
+	 * The logical_minimum < logical_maximum check is done so that we
+	 * don't unintentionally discard values sent by devices which
+	 * don't specify logical min and max.
 	 */
 	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+	    (field->logical_minimum < field->logical_maximum) &&
 	    (value < field->logical_minimum ||
 	     value > field->logical_maximum)) {
 		dbg_hid("Ignoring out-of-range value %x\n", value);

drivers/hid/hid-kye.c

@@ -314,6 +314,25 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 			*rsize = sizeof(easypen_m610x_rdesc_fixed);
 		}
 		break;
+	case USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE:
+		/*
+		 * the fixup that need to be done:
+		 *   - change Usage Maximum in the Comsumer Control
+		 *     (report ID 3) to a reasonable value
+		 */
+		if (*rsize >= 135 &&
+			/* Usage Page (Consumer Devices) */
+			rdesc[104] == 0x05 && rdesc[105] == 0x0c &&
+			/* Usage (Consumer Control) */
+			rdesc[106] == 0x09 && rdesc[107] == 0x01 &&
+			/*   Usage Maximum > 12287 */
+			rdesc[114] == 0x2a && rdesc[116] > 0x2f) {
+			hid_info(hdev,
+				 "fixing up Genius Gila Gaming Mouse "
+				 "report descriptor\n");
+			rdesc[116] = 0x2f;
+		}
+		break;
 	}
 	return rdesc;
 }
@@ -407,6 +426,8 @@ static const struct hid_device_id kye_devices[] = {
 				USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
 				USB_DEVICE_ID_KYE_EASYPEN_M610X) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+				USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, kye_devices);

drivers/hid/hid-multitouch.c

@@ -1111,6 +1111,11 @@ static const struct hid_device_id mt_devices[] = {
 		HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS,
 			USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
 
+	/* Data Modul easyMaxTouch */
+	{ .driver_data = MT_CLS_DEFAULT,
+		MT_USB_DEVICE(USB_VENDOR_ID_DATA_MODUL,
+			USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH) },
+
 	/* eGalax devices (resistive) */
 	{ .driver_data = MT_CLS_EGALAX,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
@@ -1120,33 +1125,39 @@ static const struct hid_device_id mt_devices[] = {
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
 
 	/* eGalax devices (capacitive) */
-	{ .driver_data = MT_CLS_EGALAX,
-		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207) },
-	{ .driver_data = MT_CLS_EGALAX_SERIAL,
+	{ .driver_data = MT_CLS_EGALAX,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_722A) },
-	{ .driver_data = MT_CLS_EGALAX,
+	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262) },
+	{ .driver_data = MT_CLS_EGALAX,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
 	{ .driver_data = MT_CLS_EGALAX,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA) },
+	{ .driver_data = MT_CLS_EGALAX,
+		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4) },
+	{ .driver_data = MT_CLS_EGALAX,
+		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0) },
 	{ .driver_data = MT_CLS_EGALAX,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA) },
@@ -1162,15 +1173,6 @@ static const struct hid_device_id mt_devices[] = {
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
-	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
-	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0) },
-	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4) },
 
 	/* Elo TouchSystems IntelliTouch Plus panel */
 	{ .driver_data = MT_CLS_DUAL_CONTACT_ID,

drivers/hid/hid-ps3remote.c

-/*
- * HID driver for Sony PS3 BD Remote Control
- *
- * Copyright (c) 2012 David Dillow <dave@thedillows.org>
- * Based on a blend of the bluez fakehid user-space code by Marcel Holtmann
- * and other kernel HID drivers.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
- * a Bluetooth host, the key combination Start+Enter has to be kept pressed
- * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
- *
- * There will be no PIN request from the device.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-
-#include "hid-ids.h"
-
-static __u8 ps3remote_rdesc[] = {
-	0x05, 0x01,          /* GUsagePage Generic Desktop */
-	0x09, 0x05,          /* LUsage 0x05 [Game Pad] */
-	0xA1, 0x01,          /* MCollection Application (mouse, keyboard) */
-
-	 /* Use collection 1 for joypad buttons */
-	 0xA1, 0x02,         /* MCollection Logical (interrelated data) */
-
-	  /* Ignore the 1st byte, maybe it is used for a controller
-	   * number but it's not needed for correct operation */
-	  0x75, 0x08,        /* GReportSize 0x08 [8] */
-	  0x95, 0x01,        /* GReportCount 0x01 [1] */
-	  0x81, 0x01,        /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
-
-	  /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
-	   * buttons multiple keypresses are allowed */
-	  0x05, 0x09,        /* GUsagePage Button */
-	  0x19, 0x01,        /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
-	  0x29, 0x18,        /* LUsageMaximum 0x18 [Button 24] */
-	  0x14,              /* GLogicalMinimum [0] */
-	  0x25, 0x01,        /* GLogicalMaximum 0x01 [1] */
-	  0x75, 0x01,        /* GReportSize 0x01 [1] */
-	  0x95, 0x18,        /* GReportCount 0x18 [24] */
-	  0x81, 0x02,        /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
-
-	  0xC0,              /* MEndCollection */
-
-	 /* Use collection 2 for remote control buttons */
-	 0xA1, 0x02,         /* MCollection Logical (interrelated data) */
-
-	  /* 5th byte is used for remote control buttons */
-	  0x05, 0x09,        /* GUsagePage Button */
-	  0x18,              /* LUsageMinimum [No button pressed] */
-	  0x29, 0xFE,        /* LUsageMaximum 0xFE [Button 254] */
-	  0x14,              /* GLogicalMinimum [0] */
-	  0x26, 0xFE, 0x00,  /* GLogicalMaximum 0x00FE [254] */
-	  0x75, 0x08,        /* GReportSize 0x08 [8] */
-	  0x95, 0x01,        /* GReportCount 0x01 [1] */
-	  0x80,              /* MInput  */
-
-	  /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
-	   * 0xff and 11th is for press indication */
-	  0x75, 0x08,        /* GReportSize 0x08 [8] */
-	  0x95, 0x06,        /* GReportCount 0x06 [6] */
-	  0x81, 0x01,        /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
-
-	  /* 12th byte is for battery strength */
-	  0x05, 0x06,        /* GUsagePage Generic Device Controls */
-	  0x09, 0x20,        /* LUsage 0x20 [Battery Strength] */
-	  0x14,              /* GLogicalMinimum [0] */
-	  0x25, 0x05,        /* GLogicalMaximum 0x05 [5] */
-	  0x75, 0x08,        /* GReportSize 0x08 [8] */
-	  0x95, 0x01,        /* GReportCount 0x01 [1] */
-	  0x81, 0x02,        /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
-
-	  0xC0,              /* MEndCollection */
-
-	 0xC0                /* MEndCollection [Game Pad] */
-};
-
-static const unsigned int ps3remote_keymap_joypad_buttons[] = {
-	[0x01] = KEY_SELECT,
-	[0x02] = BTN_THUMBL,		/* L3 */
-	[0x03] = BTN_THUMBR,		/* R3 */
-	[0x04] = BTN_START,
-	[0x05] = KEY_UP,
-	[0x06] = KEY_RIGHT,
-	[0x07] = KEY_DOWN,
-	[0x08] = KEY_LEFT,
-	[0x09] = BTN_TL2,		/* L2 */
-	[0x0a] = BTN_TR2,		/* R2 */
-	[0x0b] = BTN_TL,		/* L1 */
-	[0x0c] = BTN_TR,		/* R1 */
-	[0x0d] = KEY_OPTION,		/* options/triangle */
-	[0x0e] = KEY_BACK,		/* back/circle */
-	[0x0f] = BTN_0,			/* cross */
-	[0x10] = KEY_SCREEN,		/* view/square */
-	[0x11] = KEY_HOMEPAGE,		/* PS button */
-	[0x14] = KEY_ENTER,
-};
-static const unsigned int ps3remote_keymap_remote_buttons[] = {
-	[0x00] = KEY_1,
-	[0x01] = KEY_2,
-	[0x02] = KEY_3,
-	[0x03] = KEY_4,
-	[0x04] = KEY_5,
-	[0x05] = KEY_6,
-	[0x06] = KEY_7,
-	[0x07] = KEY_8,
-	[0x08] = KEY_9,
-	[0x09] = KEY_0,
-	[0x0e] = KEY_ESC,		/* return */
-	[0x0f] = KEY_CLEAR,
-	[0x16] = KEY_EJECTCD,
-	[0x1a] = KEY_MENU,		/* top menu */
-	[0x28] = KEY_TIME,
-	[0x30] = KEY_PREVIOUS,
-	[0x31] = KEY_NEXT,
-	[0x32] = KEY_PLAY,
-	[0x33] = KEY_REWIND,		/* scan back */
-	[0x34] = KEY_FORWARD,		/* scan forward */
-	[0x38] = KEY_STOP,
-	[0x39] = KEY_PAUSE,
-	[0x40] = KEY_CONTEXT_MENU,	/* pop up/menu */
-	[0x60] = KEY_FRAMEBACK,		/* slow/step back */
-	[0x61] = KEY_FRAMEFORWARD,	/* slow/step forward */
-	[0x63] = KEY_SUBTITLE,
-	[0x64] = KEY_AUDIO,
-	[0x65] = KEY_ANGLE,
-	[0x70] = KEY_INFO,		/* display */
-	[0x80] = KEY_BLUE,
-	[0x81] = KEY_RED,
-	[0x82] = KEY_GREEN,
-	[0x83] = KEY_YELLOW,
-};
-
-static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
-			     unsigned int *rsize)
-{
-	*rsize = sizeof(ps3remote_rdesc);
-	return ps3remote_rdesc;
-}
-
-static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
-			     struct hid_field *field, struct hid_usage *usage,
-			     unsigned long **bit, int *max)
-{
-	unsigned int key = usage->hid & HID_USAGE;
-
-	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
-		return -1;
-
-	switch (usage->collection_index) {
-	case 1:
-		if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
-			return -1;
-
-		key = ps3remote_keymap_joypad_buttons[key];
-		if (!key)
-			return -1;
-		break;
-	case 2:
-		if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
-			return -1;
-
-		key = ps3remote_keymap_remote_buttons[key];
-		if (!key)
-			return -1;
-		break;
-	default:
-		return -1;
-	}
-
-	hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
-	return 1;
-}
-
-static const struct hid_device_id ps3remote_devices[] = {
-	/* PS3 BD Remote Control */
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) },
-	/* Logitech Harmony Adapter for PS3 */
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) },
-	{ }
-};
-MODULE_DEVICE_TABLE(hid, ps3remote_devices);
-
-static struct hid_driver ps3remote_driver = {
-	.name          = "ps3_remote",
-	.id_table      = ps3remote_devices,
-	.report_fixup  = ps3remote_fixup,
-	.input_mapping = ps3remote_mapping,
-};
-module_hid_driver(ps3remote_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Dillow <dave@thedillows.org>, Antonio Ospite <ospite@studenti.unina.it>");

drivers/hid/hid-roccat.c

@@ -426,13 +426,23 @@ static int __init roccat_init(void)
 
 	if (retval < 0) {
 		pr_warn("can't get major number\n");
-		return retval;
+		goto error;
 	}
 
 	cdev_init(&roccat_cdev, &roccat_ops);
-	cdev_add(&roccat_cdev, dev_id, ROCCAT_MAX_DEVICES);
+	retval = cdev_add(&roccat_cdev, dev_id, ROCCAT_MAX_DEVICES);
 
+	if (retval < 0) {
+		pr_warn("cannot add cdev\n");
+		goto cleanup_alloc_chrdev_region;
+	}
 	return 0;
+
+
+ cleanup_alloc_chrdev_region:
+	unregister_chrdev_region(dev_id, ROCCAT_MAX_DEVICES);
+ error:
+	return retval;
 }
 
 static void __exit roccat_exit(void)

drivers/hid/hid-wacom.c

@@ -46,6 +46,7 @@ struct wacom_data {
 	__u8 battery_capacity;
 	__u8 power_raw;
 	__u8 ps_connected;
+	__u8 bat_charging;
 	struct power_supply battery;
 	struct power_supply ac;
 	__u8 led_selector;
@@ -62,6 +63,7 @@ static enum power_supply_property wacom_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_STATUS,
 };
 
 static enum power_supply_property wacom_ac_props[] = {
@@ -287,6 +289,15 @@ static int wacom_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CAPACITY:
 		val->intval = wdata->battery_capacity;
 		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (wdata->bat_charging)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			if (wdata->battery_capacity == 100 && wdata->ps_connected)
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -727,7 +738,8 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 			if (power_raw != wdata->power_raw) {
 				wdata->power_raw = power_raw;
 				wdata->battery_capacity = batcap_i4[power_raw & 0x07];
-				wdata->ps_connected = power_raw & 0x08;
+				wdata->bat_charging = (power_raw & 0x08) ? 1 : 0;
+				wdata->ps_connected = (power_raw & 0x10) ? 1 : 0;
 			}
 
 			break;

drivers/hid/hid-wiimote-debug.c

 /*
- * Debug support for HID Nintendo Wiimote devices
- * Copyright (c) 2011 David Herrmann
+ * Debug support for HID Nintendo Wii / Wii U peripherals
+ * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
  */
 
 /*
@@ -127,7 +127,8 @@ static int wiidebug_drm_open(struct inode *i, struct file *f)
 static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
 							size_t s, loff_t *off)
 {
-	struct wiimote_debug *dbg = f->private_data;
+	struct seq_file *sf = f->private_data;
+	struct wiimote_debug *dbg = sf->private;
 	unsigned long flags;
 	char buf[16];
 	ssize_t len;
@@ -140,7 +141,7 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
 	if (copy_from_user(buf, u, len))
 		return -EFAULT;
 
-	buf[15] = 0;
+	buf[len] = 0;
 
 	for (i = 0; i < WIIPROTO_REQ_MAX; ++i) {
 		if (!wiidebug_drmmap[i])
@@ -150,10 +151,13 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
 	}
 
 	if (i == WIIPROTO_REQ_MAX)
-		i = simple_strtoul(buf, NULL, 10);
+		i = simple_strtoul(buf, NULL, 16);
 
 	spin_lock_irqsave(&dbg->wdata->state.lock, flags);
+	dbg->wdata->state.flags &= ~WIIPROTO_FLAG_DRM_LOCKED;
 	wiiproto_req_drm(dbg->wdata, (__u8) i);
+	if (i != WIIPROTO_REQ_NULL)
+		dbg->wdata->state.flags |= WIIPROTO_FLAG_DRM_LOCKED;
 	spin_unlock_irqrestore(&dbg->wdata->state.lock, flags);
 
 	return len;

drivers/hid/i2c-hid/i2c-hid.c

@@ -108,6 +108,7 @@ static const struct i2c_hid_cmd hid_reset_cmd =		{ I2C_HID_CMD(0x01),
 static const struct i2c_hid_cmd hid_get_report_cmd =	{ I2C_HID_CMD(0x02) };
 static const struct i2c_hid_cmd hid_set_report_cmd =	{ I2C_HID_CMD(0x03) };
 static const struct i2c_hid_cmd hid_set_power_cmd =	{ I2C_HID_CMD(0x08) };
+static const struct i2c_hid_cmd hid_no_cmd =		{ .length = 0 };
 
 /*
  * These definitions are not used here, but are defined by the spec.
@@ -259,8 +260,11 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
 {
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	u8 *args = ihid->argsbuf;
+	const struct i2c_hid_cmd * hidcmd = &hid_set_report_cmd;
 	int ret;
 	u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
+	u16 outputRegister = le16_to_cpu(ihid->hdesc.wOutputRegister);
+	u16 maxOutputLength = le16_to_cpu(ihid->hdesc.wMaxOutputLength);
 
 	/* hidraw already checked that data_len < HID_MAX_BUFFER_SIZE */
 	u16 size =	2			/* size */ +
@@ -278,8 +282,18 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
 		reportID = 0x0F;
 	}
 
+	/*
+	 * use the data register for feature reports or if the device does not
+	 * support the output register
+	 */
+	if (reportType == 0x03 || maxOutputLength == 0) {
 		args[index++] = dataRegister & 0xFF;
 		args[index++] = dataRegister >> 8;
+	} else {
+		args[index++] = outputRegister & 0xFF;
+		args[index++] = outputRegister >> 8;
+		hidcmd = &hid_no_cmd;
+	}
 
 	args[index++] = size & 0xFF;
 	args[index++] = size >> 8;
@@ -289,7 +303,7 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
 
 	memcpy(&args[index], buf, data_len);
 
-	ret = __i2c_hid_command(client, &hid_set_report_cmd, reportID,
+	ret = __i2c_hid_command(client, hidcmd, reportID,
 		reportType, args, args_len, NULL, 0);
 	if (ret) {
 		dev_err(&client->dev, "failed to set a report to device.\n");

include/uapi/linux/input.h

@@ -506,11 +506,15 @@ struct input_keymap_entry {
 #define BTN_DEAD		0x12f
 
 #define BTN_GAMEPAD		0x130
-#define BTN_A			0x130
-#define BTN_B			0x131
+#define BTN_SOUTH		0x130
+#define BTN_A			BTN_SOUTH
+#define BTN_EAST		0x131
+#define BTN_B			BTN_EAST
 #define BTN_C			0x132
-#define BTN_X			0x133
-#define BTN_Y			0x134
+#define BTN_NORTH		0x133
+#define BTN_X			BTN_NORTH
+#define BTN_WEST		0x134
+#define BTN_Y			BTN_WEST
 #define BTN_Z			0x135
 #define BTN_TL			0x136
 #define BTN_TR			0x137
@@ -707,6 +711,11 @@ struct input_keymap_entry {
 #define KEY_ATTENDANT_TOGGLE	0x21d	/* Attendant call on or off */
 #define KEY_LIGHTS_TOGGLE	0x21e	/* Reading light on or off */
 
+#define BTN_DPAD_UP		0x220
+#define BTN_DPAD_DOWN		0x221
+#define BTN_DPAD_LEFT		0x222
+#define BTN_DPAD_RIGHT		0x223
+
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
 #define BTN_TRIGGER_HAPPY2		0x2c1

net/bluetooth/hidp/core.c

@@ -850,6 +850,29 @@ static void hidp_session_dev_del(struct hidp_session *session)
 		input_unregister_device(session->input);
 }
 
+/*
+ * Asynchronous device registration
+ * HID device drivers might want to perform I/O during initialization to
+ * detect device types. Therefore, call device registration in a separate
+ * worker so the HIDP thread can schedule I/O operations.
+ * Note that this must be called after the worker thread was initialized
+ * successfully. This will then add the devices and increase session state
+ * on success, otherwise it will terminate the session thread.
+ */
+static void hidp_session_dev_work(struct work_struct *work)
+{
+	struct hidp_session *session = container_of(work,
+						    struct hidp_session,
+						    dev_init);
+	int ret;
+
+	ret = hidp_session_dev_add(session);
+	if (!ret)
+		atomic_inc(&session->state);
+	else
+		hidp_session_terminate(session);
+}
+
 /*
  * Create new session object
  * Allocate session object, initialize static fields, copy input data into the
@@ -897,6 +920,7 @@ static int hidp_session_new(struct hidp_session **out, const bdaddr_t *bdaddr,
 	session->idle_to = req->idle_to;
 
 	/* device management */
+	INIT_WORK(&session->dev_init, hidp_session_dev_work);
 	setup_timer(&session->timer, hidp_idle_timeout,
 		    (unsigned long)session);
 
@@ -1035,8 +1059,8 @@ static void hidp_session_terminate(struct hidp_session *session)
  * Probe HIDP session
  * This is called from the l2cap_conn core when our l2cap_user object is bound
  * to the hci-connection. We get the session via the \user object and can now
- * start the session thread, register the HID/input devices and link it into
- * the global session list.
+ * start the session thread, link it into the global session list and
+ * schedule HID/input device registration.
  * The global session-list owns its own reference to the session object so you
  * can drop your own reference after registering the l2cap_user object.
  */
@@ -1058,21 +1082,30 @@ static int hidp_session_probe(struct l2cap_conn *conn,
 		goto out_unlock;
 	}
 
-	ret = hidp_session_start_sync(session);
+	if (session->input) {
+		ret = hidp_session_dev_add(session);
 		if (ret)
 			goto out_unlock;
+	}
 
-	ret = hidp_session_dev_add(session);
+	ret = hidp_session_start_sync(session);
 	if (ret)
-		goto out_stop;
+		goto out_del;
+
+	/* HID device registration is async to allow I/O during probe */
+	if (session->input)
+		atomic_inc(&session->state);
+	else
+		schedule_work(&session->dev_init);
 
 	hidp_session_get(session);
 	list_add(&session->list, &hidp_session_list);
 	ret = 0;
 	goto out_unlock;
 
-out_stop:
-	hidp_session_terminate(session);
+out_del:
+	if (session->input)
+		hidp_session_dev_del(session);
 out_unlock:
 	up_write(&hidp_session_sem);
 	return ret;
@@ -1102,7 +1135,12 @@ static void hidp_session_remove(struct l2cap_conn *conn,
 	down_write(&hidp_session_sem);
 
 	hidp_session_terminate(session);
+
+	cancel_work_sync(&session->dev_init);
+	if (session->input ||
+	    atomic_read(&session->state) > HIDP_SESSION_PREPARING)
 		hidp_session_dev_del(session);
+
 	list_del(&session->list);
 
 	up_write(&hidp_session_sem);

net/bluetooth/hidp/hidp.h

@@ -128,6 +128,7 @@ int hidp_get_conninfo(struct hidp_conninfo *ci);
 
 enum hidp_session_state {
 	HIDP_SESSION_IDLING,
+	HIDP_SESSION_PREPARING,
 	HIDP_SESSION_RUNNING,
 };
 
@@ -156,6 +157,7 @@ struct hidp_session {
 	unsigned long idle_to;
 
 	/* device management */
+	struct work_struct dev_init;
 	struct input_dev *input;
 	struct hid_device *hid;
 	struct timer_list timer;