hwmon:change sht15_reverse()

This change sht15_reverse() to be generic bitrev8().
Signed-off-by: yalin wang <yalin.wang2010@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/sht15.c

@@ -33,6 +33,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/atomic.h>
+#include <linux/bitrev.h>
 
 /* Commands */
 #define SHT15_MEASURE_TEMP		0x03
@@ -172,19 +173,6 @@ struct sht15_data {
 	atomic_t			interrupt_handled;
 };
 
-/**
- * sht15_reverse() - reverse a byte
- * @byte:    byte to reverse.
- */
-static u8 sht15_reverse(u8 byte)
-{
-	u8 i, c;
-
-	for (c = 0, i = 0; i < 8; i++)
-		c |= (!!(byte & (1 << i))) << (7 - i);
-	return c;
-}
-
 /**
  * sht15_crc8() - compute crc8
  * @data:	sht15 specific data.
@@ -196,7 +184,7 @@ static u8 sht15_crc8(struct sht15_data *data,
 		const u8 *value,
 		int len)
 {
-	u8 crc = sht15_reverse(data->val_status & 0x0F);
+	u8 crc = bitrev8(data->val_status & 0x0F);
 
 	while (len--) {
 		crc = sht15_crc8_table[*value ^ crc];
@@ -477,7 +465,7 @@ static int sht15_update_status(struct sht15_data *data)
 
 		if (data->checksumming) {
 			sht15_ack(data);
-			dev_checksum = sht15_reverse(sht15_read_byte(data));
+			dev_checksum = bitrev8(sht15_read_byte(data));
 			checksum_vals[0] = SHT15_READ_STATUS;
 			checksum_vals[1] = status;
 			data->checksum_ok = (sht15_crc8(data, checksum_vals, 2)
@@ -864,7 +852,7 @@ static void sht15_bh_read_data(struct work_struct *work_s)
 		 */
 		if (sht15_ack(data))
 			goto wakeup;
-		dev_checksum = sht15_reverse(sht15_read_byte(data));
+		dev_checksum = bitrev8(sht15_read_byte(data));
 		checksum_vals[0] = (data->state == SHT15_READING_TEMP) ?
 			SHT15_MEASURE_TEMP : SHT15_MEASURE_RH;
 		checksum_vals[1] = (u8) (val >> 8);