Merge tag 'imx-fixes-6.2' of...

Merge tag 'imx-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.2:

- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
  clock error.
- Fix mach-imx cpu code to add missing of_node_put() call.
- A couple of verdin-imx8mm DT fixes for audio playback support.
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees.
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
  eMMC CMD8 CRC error in HS400ES/HS400 mode.
- A couple of imx8mp-blk-ctrl driver fixes from Lucas Stach, enabling
  pixclk with HDMI_TX_PHY PD, dropping power device name setting.
- Fix the error check for of_clk_get_by_name() in soc-imx8m driver.
- Other various DT fixes and cleanups.

* tag 'imx-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
  soc: imx8m: Fix incorrect check for of_clk_get_by_name()
  arm64: dts: imx8mm-venice-gw7901: fix USB2 controller OC polarity
  arm64: dts: imx8mp-evk: pcie0-refclk cosmetic cleanup
  arm64: dts: imx8mp: Fix power-domain typo
  arm64: dts: imx8mp: Fix missing GPC Interrupt
  soc: imx: imx8mp-blk-ctrl: don't set power device name
  arm64: dts: imx8mm: Drop xtal clock specifier from eDM SBC
  ARM: imx: add missing of_node_put()
  arm64: dts: imx93-11x11-evk: correct clock and strobe pad setting
  arm64: dts: verdin-imx8mm: fix dev board audio playback
  arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI
  arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux
  arm64: dts: freescale: Fix pca954x i2c-mux node names
  ARM: dts: vf610: Fix pca9548 i2c-mux node names
  ARM: dts: imx: Fix pca9547 i2c-mux node name
  arm64: dts: verdin-imx8mm: fix dahlia audio playback
  ARM: dts: imx6qdl-gw560x: Remove incorrect 'uart-has-rtscts'
  ARM: dts: imx7d-pico: Use 'clock-frequency'
  ARM: dts: imx6ul-pico-dwarf: Use 'clock-frequency'
  arm64: dts: imx8mp-phycore-som: Remove invalid PMIC property
  ...

Link: https://lore.kernel.org/r/20230102132016.GA10699@T480Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx53-ppd.dts

@@ -488,7 +488,7 @@ &i2c1 {
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/imx6qdl-gw560x.dtsi

@@ -632,7 +632,6 @@ &ssi1 {
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6ul-pico-dwarf.dts

@@ -32,7 +32,7 @@ sys_mclk: clock-sys-mclk {
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

arch/arm/boot/dts/imx7d-pico-dwarf.dts

@@ -32,7 +32,7 @@ sys_mclk: clock-sys-mclk {
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -52,7 +52,7 @@ pressure-sensor@60 {
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";

arch/arm/boot/dts/imx7d-pico-nymph.dts

@@ -43,7 +43,7 @@ sys_mclk: clock-sys-mclk {
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -64,7 +64,7 @@ adc@52 {
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -345,7 +345,7 @@ gpio6: io-expander@22 {
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";

arch/arm/boot/dts/vf610-zii-dev-rev-c.dts

@@ -340,7 +340,7 @@ eeprom@50 {
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";

arch/arm/mach-imx/cpu-imx25.c

@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);

arch/arm/mach-imx/cpu-imx27.c

@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need

arch/arm/mach-imx/cpu-imx31.c

@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */

arch/arm/mach-imx/cpu-imx35.c

@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);

arch/arm/mach-imx/cpu-imx5.c

@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;

arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts

@@ -110,7 +110,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts

@@ -89,7 +89,7 @@ fpga: board-control@2,0 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts

@@ -88,7 +88,7 @@ &duart1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts

@@ -53,7 +53,7 @@ flash@2 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts

@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts

@@ -245,7 +245,7 @@ rx8035: rtc@32 {
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi

@@ -103,7 +103,7 @@ mdio0_phy15: mdio-phy3@1f {
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi

@@ -44,7 +44,7 @@ cpld@3,0 {
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi

@@ -54,7 +54,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi

@@ -120,7 +120,7 @@ &csi {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -316,7 +316,7 @@ pinctrl_espi2: espi2grp {
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts

@@ -275,7 +275,7 @@ pmic: pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
 		#clock-cells = <0>;
-		clocks = <&clk_xtal32k 0>;
+		clocks = <&clk_xtal32k>;
 		clock-output-names = "clk-32k-out";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;

arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts

@@ -214,7 +214,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts

@@ -771,6 +771,7 @@ &usbotg1 {
 &usbotg2 {
 	dr_mode = "host";
 	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi

@@ -9,6 +9,7 @@ sound_card: sound-card {
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",

arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi

@@ -11,6 +11,7 @@ sound_card: sound-card {
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",

arch/arm64/boot/dts/freescale/imx8mp-evk.dts

@@ -36,8 +36,8 @@ memory@40000000 {
 
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
 	};
 
 	reg_can1_stby: regulator-can1-stby {

arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi

@@ -99,7 +99,6 @@ pmic: pmic@25 {
 
 		regulators {
 			buck1: BUCK1 {
-				regulator-compatible = "BUCK1";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -108,7 +107,6 @@ buck1: BUCK1 {
 			};
 
 			buck2: BUCK2 {
-				regulator-compatible = "BUCK2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <2187500>;
 				regulator-boot-on;
@@ -119,7 +117,6 @@ buck2: BUCK2 {
 			};
 
 			buck4: BUCK4 {
-				regulator-compatible = "BUCK4";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -127,7 +124,6 @@ buck4: BUCK4 {
 			};
 
 			buck5: BUCK5 {
-				regulator-compatible = "BUCK5";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -135,7 +131,6 @@ buck5: BUCK5 {
 			};
 
 			buck6: BUCK6 {
-				regulator-compatible = "BUCK6";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <3400000>;
 				regulator-boot-on;
@@ -143,7 +138,6 @@ buck6: BUCK6 {
 			};
 
 			ldo1: LDO1 {
-				regulator-compatible = "LDO1";
 				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -151,7 +145,6 @@ ldo1: LDO1 {
 			};
 
 			ldo2: LDO2 {
-				regulator-compatible = "LDO2";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
@@ -159,7 +152,6 @@ ldo2: LDO2 {
 			};
 
 			ldo3: LDO3 {
-				regulator-compatible = "LDO3";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -167,13 +159,11 @@ ldo3: LDO3 {
 			};
 
 			ldo4: LDO4 {
-				regulator-compatible = "LDO4";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5: LDO5 {
-				regulator-compatible = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -524,6 +524,7 @@ gpc: gpc@303a0000 {
 				compatible = "fsl,imx8mp-gpc";
 				reg = <0x303a0000 0x1000>;
 				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
 
@@ -590,7 +591,7 @@ pgc_mipi_phy2: power-domain@16 {
 						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_hsiomix: power-domains@17 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
 						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -1297,7 +1298,7 @@ usb3_0: usb@32f10100 {
 			reg = <0x32f10100 0x8>,
 			      <0x381f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1310,9 +1311,9 @@ usb3_0: usb@32f10100 {
 			usb_dwc3_0: usb@38100000 {
 				compatible = "snps,dwc3";
 				reg = <0x38100000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
@@ -1339,7 +1340,7 @@ usb3_1: usb@32f10108 {
 			reg = <0x32f10108 0x8>,
 			      <0x382f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1352,9 +1353,9 @@ usb3_1: usb@32f10108 {
 			usb_dwc3_1: usb@38200000 {
 				compatible = "snps,dwc3";
 				reg = <0x38200000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;

arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts

@@ -133,7 +133,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;

arch/arm64/boot/dts/freescale/imx8mq-thor96.dts

@@ -339,7 +339,7 @@ &usdhc1 {
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@ &usdhc2 {
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8qxp-mek.dts

@@ -61,7 +61,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts

@@ -74,7 +74,7 @@ MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
 
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17fe
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
 			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
 			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
 			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
@@ -84,7 +84,7 @@ MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
 			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
 			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
 			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
-			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
 
@@ -102,7 +102,7 @@ MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
 			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
 			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
 			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe

drivers/soc/imx/imx8mp-blk-ctrl.c

@@ -212,7 +212,7 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 		break;
 	case IMX8MP_HDMIBLK_PD_LCDIF:
 		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
-				BIT(7) | BIT(16) | BIT(17) | BIT(18) |
+				BIT(16) | BIT(17) | BIT(18) |
 				BIT(19) | BIT(20));
 		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
 		regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
@@ -241,6 +241,7 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
 		regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(1));
 		break;
 	case IMX8MP_HDMIBLK_PD_HDMI_TX_PHY:
+		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(7));
 		regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
 		regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
 		regmap_clear_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
@@ -270,7 +271,7 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 				  BIT(4) | BIT(5) | BIT(6));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
-				  BIT(7) | BIT(16) | BIT(17) | BIT(18) |
+				  BIT(16) | BIT(17) | BIT(18) |
 				  BIT(19) | BIT(20));
 		break;
 	case IMX8MP_HDMIBLK_PD_PAI:
@@ -298,6 +299,7 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
 	case IMX8MP_HDMIBLK_PD_HDMI_TX_PHY:
 		regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
+		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(7));
 		regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
 		break;
 	case IMX8MP_HDMIBLK_PD_HDCP:
@@ -590,7 +592,6 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
 			ret = PTR_ERR(domain->power_dev);
 			goto cleanup_pds;
 		}
-		dev_set_name(domain->power_dev, "%s", data->name);
 
 		domain->genpd.name = data->name;
 		domain->genpd.power_on = imx8mp_blk_ctrl_power_on;

drivers/soc/imx/soc-imx8m.c

@@ -66,8 +66,8 @@ static u32 __init imx8mq_soc_revision(void)
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
 	clk = of_clk_get_by_name(np, NULL);
-	if (!clk) {
-		WARN_ON(!clk);
+	if (IS_ERR(clk)) {
+		WARN_ON(IS_ERR(clk));
 		return 0;
 	}