brcmsmac: remove si_pmu_spuravoid_pllupdate()

si_pmu_spuravoid_pllupdate() is now replaced by
bcma_pmu_spuravoid_pllupdate() which does the same thing, but supports
more chips.

This function is in my pending patch series for bcma.
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date:   Mon Jun 4 01:31:32 2012 +0200

    bcma: add bcma_pmu_spuravoid_pllupdate()
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c

@@ -21106,6 +21106,7 @@ wlc_phy_chanspec_nphy_setup(struct brcms_phy *pi, u16 chanspec,
 			    const struct nphy_sfo_cfg *ci)
 {
 	u16 val;
+	struct si_info *sii = container_of(pi->sh->sih, struct si_info, pub);
 
 	val = read_phy_reg(pi, 0x09) & NPHY_BandControl_currentBand;
 	if (CHSPEC_IS5G(chanspec) && !val) {
@@ -21189,7 +21190,7 @@ wlc_phy_chanspec_nphy_setup(struct brcms_phy *pi, u16 chanspec,
 			spuravoid = 1;
 
 		wlapi_bmac_core_phypll_ctl(pi->sh->physhim, false);
-		si_pmu_spuravoid_pllupdate(pi->sh->sih, spuravoid);
+		bcma_pmu_spuravoid_pllupdate(&sii->icbus->drv_cc, spuravoid);
 		wlapi_bmac_core_phypll_ctl(pi->sh->physhim, true);
 
 		if ((pi->sh->chip == BCM43224_CHIP_ID) ||

drivers/net/wireless/brcm80211/brcmsmac/pmu.c

@@ -74,16 +74,6 @@
  * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary
  * number to differentiate different PLLs controlled by the same PMU rev.
  */
-/* pllcontrol registers:
- * ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>,
- * p1div, p2div, _bypass_sdmod
- */
-#define PMU1_PLL0_PLLCTL0		0
-#define PMU1_PLL0_PLLCTL1		1
-#define PMU1_PLL0_PLLCTL2		2
-#define PMU1_PLL0_PLLCTL3		3
-#define PMU1_PLL0_PLLCTL4		4
-#define PMU1_PLL0_PLLCTL5		5
 
 /* pmu XtalFreqRatio */
 #define	PMU_XTALFREQ_REG_ILPCTR_MASK	0x00001FFF
@@ -108,80 +98,6 @@
 #define	RES4313_HT_AVAIL_RSRC		14
 #define	RES4313_MACPHY_CLK_AVAIL_RSRC	15
 
-void si_pmu_spuravoid_pllupdate(struct si_pub *sih, u8 spuravoid)
-{
-	u32 tmp = 0;
-	struct si_info *sii = container_of(sih, struct si_info, pub);
-	struct bcma_device *core;
-
-	/* switch to chipc */
-	core = sii->icbus->drv_cc.core;
-
-	switch (ai_get_chip_id(sih)) {
-	case BCM43224_CHIP_ID:
-	case BCM43225_CHIP_ID:
-		if (spuravoid == 1) {
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL0);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x11500010);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL1);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x000C0C06);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL2);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x0F600a08);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL3);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x00000000);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL4);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x2001E920);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL5);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x88888815);
-		} else {
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL0);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x11100010);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL1);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x000c0c06);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL2);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x03000a08);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL3);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x00000000);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL4);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x200005c0);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_addr),
-				     PMU1_PLL0_PLLCTL5);
-			bcma_write32(core, CHIPCREGOFFS(pllcontrol_data),
-				     0x88888815);
-		}
-		tmp = 1 << 10;
-		break;
-
-	default:
-		/* bail out */
-		return;
-	}
-
-	bcma_set32(core, CHIPCREGOFFS(pmucontrol), tmp);
-}
-
 u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
 {
 	uint delay = PMU_MAX_TRANSITION_DLY;

drivers/net/wireless/brcm80211/brcmsmac/pmu.h

@@ -26,7 +26,6 @@ extern u32 si_pmu_chipcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
 extern u32 si_pmu_regcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
 extern u32 si_pmu_alp_clock(struct si_pub *sih);
 extern void si_pmu_pllupd(struct si_pub *sih);
-extern void si_pmu_spuravoid_pllupdate(struct si_pub *sih, u8 spuravoid);
 extern u32 si_pmu_pllcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
 extern u32 si_pmu_measure_alpclk(struct si_pub *sih);