Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/gregkh-2.5

drivers/usb/host/uhci-debug.c

@@ -513,7 +513,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
 }
 
 #ifdef CONFIG_PROC_FS
-#define MAX_OUTPUT	(PAGE_SIZE * 16)
+#define MAX_OUTPUT	(64 * 1024)
 
 static struct proc_dir_entry *uhci_proc_root = NULL;
 

drivers/usb/net/cdc-ether.h

-// Portions of this file taken from 
-// Petko Manolov - Petkan (petkan@dce.bg)
-// from his driver pegasus.h
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-#define CS_INTERFACE			0x24
-
-#define	CDC_ETHER_MAX_MTU		1536
-
-#define	CDC_ETHER_PRESENT		0x00000001
-#define	CDC_ETHER_RUNNING		0x00000002
-#define	CDC_ETHER_TX_BUSY		0x00000004
-#define	CDC_ETHER_RX_BUSY		0x00000008
-#define	CDC_ETHER_UNPLUG		0x00000040
-
-#define	CDC_ETHER_TX_TIMEOUT	(HZ*10)
-
-#define	TX_UNDERRUN				0x80
-#define	EXCESSIVE_COL			0x40
-#define	LATE_COL				0x20
-#define	NO_CARRIER				0x10
-#define	LOSS_CARRIER			0x08
-#define	JABBER_TIMEOUT			0x04
-
-#define	CDC_ETHER_REQT_READ		0xc0
-#define	CDC_ETHER_REQT_WRITE	0x40
-#define	CDC_ETHER_REQ_GET_REGS	0xf0
-#define	CDC_ETHER_REQ_SET_REGS	0xf1
-#define	CDC_ETHER_REQ_SET_REG	PIPERIDER_REQ_SET_REGS
-#define	L1_ALIGN(x)		x __attribute__((aligned(L1_CACHE_BYTES)))
-
-#define MODE_FLAG_PROMISCUOUS   (1<<0)
-#define MODE_FLAG_ALL_MULTICAST (1<<1)
-#define MODE_FLAG_DIRECTED      (1<<2)
-#define MODE_FLAG_BROADCAST     (1<<3)
-#define MODE_FLAG_MULTICAST     (1<<4)
-
-#define SET_ETHERNET_MULTICAST_FILTER    0x40
-#define SET_ETHERNET_PACKET_FILTER       0x43
-
-typedef struct _ether_dev_t {
-	struct usb_device	*usb;
-	struct net_device	*net;
-	struct net_device_stats	stats;
-	unsigned		flags;
-	int			configuration_num;
-	int			bConfigurationValue;
-	int			comm_interface;
-	int			comm_bInterfaceNumber;
-	int			comm_interface_altset_num;
-	int			comm_bAlternateSetting;
-	int			comm_ep_in;
-	int			data_interface;
-	int			data_bInterfaceNumber;
-	int			data_interface_altset_num_with_traffic;
-	int			data_bAlternateSetting_with_traffic;
-	int			data_interface_altset_num_without_traffic;
-	int			data_bAlternateSetting_without_traffic;
-	int			data_ep_in;
-	int			data_ep_out;
-	int			data_ep_out_size;
-	__u16			bcdCDC;
-	__u8			iMACAddress;
-	__u32			bmEthernetStatistics;
-	__u16			wMaxSegmentSize;
-	__u16                   mode_flags;
-	__u16			wNumberMCFilters;
-	__u8			bNumberPowerFilters;
-	int			intr_interval;
-	struct urb		*rx_urb, *tx_urb, *intr_urb;
-	unsigned char		L1_ALIGN(rx_buff[CDC_ETHER_MAX_MTU]);
-	unsigned char		L1_ALIGN(tx_buff[CDC_ETHER_MAX_MTU]);
-	unsigned char		L1_ALIGN(intr_buff[8]);
-} ether_dev_t;
-
-#define REQ_HDR_FUNC_DESCR	0x0001
-#define REQ_UNION_FUNC_DESCR	0x0002
-#define REQ_ETH_FUNC_DESCR	0x0004
-#define REQUIREMENTS_TOTAL	0x0007
-
-
-

drivers/usb/net/kaweth.c

@@ -56,9 +56,11 @@
 #include <linux/usb.h>
 #include <linux/types.h>
 #include <linux/ethtool.h>
+#include <linux/pci.h>
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <asm/byteorder.h>
+#include <asm/dma-mapping.h>
 
 #define DEBUG
 
@@ -215,8 +217,10 @@ struct kaweth_device
 	__u32 status;
 	int end;
 	int removed;
-	int suspend_lowmem;
+	int suspend_lowmem_rx;
+	int suspend_lowmem_ctrl;
 	int linkstate;
+	struct work_struct lowmem_work;
 
 	struct usb_device *dev;
 	struct net_device *net;
@@ -475,14 +479,29 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *, int);
 /****************************************************************
 	int_callback
 *****************************************************************/
+
+static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, int mf)
+{
+	int status;
+
+	status = usb_submit_urb (kaweth->irq_urb, mf);
+	if (unlikely(status == -ENOMEM)) {
+		kaweth->suspend_lowmem_ctrl = 1;
+		schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+	} else {
+		kaweth->suspend_lowmem_ctrl = 0;
+	}
+
+	if (status)
+		err ("can't resubmit intr, %s-%s, status %d",
+				kaweth->dev->bus->bus_name,
+				kaweth->dev->devpath, status);
+}
+
 static void int_callback(struct urb *u, struct pt_regs *regs)
 {
 	struct kaweth_device *kaweth = u->context;
-	int act_state, status;
-
-	/* we abuse the interrupt urb for rebsubmitting under low memory saving a timer */
-	if (kaweth->suspend_lowmem)
-		kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+	int act_state;
 
 	switch (u->status) {
 	case 0:			/* success */
@@ -506,13 +525,24 @@ static void int_callback(struct urb *u, struct pt_regs *regs)
 		kaweth->linkstate = act_state;
 	}
 resubmit:
-	status = usb_submit_urb (u, SLAB_ATOMIC);
-	if (status)
-		err ("can't resubmit intr, %s-%s, status %d",
-				kaweth->dev->bus->bus_name,
-				kaweth->dev->devpath, status);
+	kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
+}
+
+static void kaweth_resubmit_tl(void *d)
+{
+	struct kaweth_device *kaweth = (struct kaweth_device *)d;
+
+	if (kaweth->status | KAWETH_STATUS_CLOSING)
+		return;
+
+	if (kaweth->suspend_lowmem_rx)
+		kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+
+	if (kaweth->suspend_lowmem_ctrl)
+		kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
 }
 
+
 /****************************************************************
  *     kaweth_resubmit_rx_urb
  ****************************************************************/
@@ -532,11 +562,13 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
 	kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
 
 	if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
-		if (result == -ENOMEM)
-			kaweth->suspend_lowmem = 1;
+		if (result == -ENOMEM) {
+			kaweth->suspend_lowmem_rx = 1;
+			schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+		}
 		kaweth_err("resubmitting rx_urb %d failed", result);
 	} else {
-		kaweth->suspend_lowmem = 0;
+		kaweth->suspend_lowmem_rx = 0;
 	}
 
 	return result;
@@ -665,6 +697,13 @@ static int kaweth_close(struct net_device *net)
 	usb_unlink_urb(kaweth->irq_urb);
 	usb_unlink_urb(kaweth->rx_urb);
 
+	flush_scheduled_work();
+
+	/* a scheduled work may have resubmitted,
+	   we hit them again */
+	usb_unlink_urb(kaweth->irq_urb);
+	usb_unlink_urb(kaweth->rx_urb);
+
 	kaweth->status &= ~KAWETH_STATUS_CLOSING;
 
 	return 0;
@@ -1075,10 +1114,15 @@ static int kaweth_probe(
 
 	memset(&kaweth->stats, 0, sizeof(kaweth->stats));
 
+	INIT_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl, (void *)kaweth);
+
 	SET_MODULE_OWNER(netdev);
 
 	usb_set_intfdata(intf, kaweth);
 
+	if (dma_supported (&intf->dev, 0xffffffffffffffffULL))
+		kaweth->net->features |= NETIF_F_HIGHDMA;
+
 	if (register_netdev(netdev) != 0) {
 		kaweth_err("Error calling init_etherdev.");
 		goto err_intfdata;
@@ -1092,7 +1136,6 @@ static int kaweth_probe(
 
 err_intfdata:
 	usb_set_intfdata(intf, NULL);
-err_all:
 	usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
 err_all_but_rxbuf:
 	usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);

drivers/usb/serial/io_edgeport.c

@@ -412,6 +412,7 @@ struct divisor_table_entry {
 // MCR.7 = 0.
 //
 static struct divisor_table_entry divisor_table[] = {
+	{   50,		4608},  
 	{   75,		3072},  
 	{   110,	2095},		/* 2094.545455 => 230450   => .0217 % over */
 	{   134,	1713},		/* 1713.011152 => 230398.5 => .00065% under */
@@ -2591,7 +2592,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor)
 	// We have tried all of the standard baud rates
 	// lets try to calculate the divisor for this baud rate
 	// Make sure the baud rate is reasonable
-	if (baudrate > 75 &&  baudrate < 230400) {
+	if (baudrate < 230400) {
 		// get divisor
 		custom = (__u16)(230400L  / baudrate);
 

drivers/usb/serial/pl2303.c

@@ -537,16 +537,20 @@ static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file)
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
+	unsigned int status;
 	unsigned int result;
 
 	dbg("%s (%d)", __FUNCTION__, port->number);
 
 	spin_lock_irqsave (&priv->lock, flags);
 	mcr = priv->line_control;
+	status = priv->line_status;
 	spin_unlock_irqrestore (&priv->lock, flags);
 
 	result = ((mcr & CONTROL_DTR)		? TIOCM_DTR : 0)
-		  | ((mcr & CONTROL_RTS)	? TIOCM_RTS : 0);
+		  | ((mcr & CONTROL_RTS)	? TIOCM_RTS : 0)
+		  | ((status & UART_CTS)	? TIOCM_CTS : 0)
+		  | ((status & UART_DSR)	? TIOCM_DSR : 0);
 
 	dbg("%s - result = %x", __FUNCTION__, result);
 

drivers/usb/serial/visor.c

@@ -12,6 +12,10 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
+ * (06/03/2003) Judd Montgomery <judd at jpilot.org>
+ *     Added support for module parameter options for untested/unknown
+ *     devices.
+ *
  * (03/09/2003) gkh
  *	Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
  *	<brachtl@redgrep.cz> for the information.
@@ -188,6 +192,9 @@ static int  treo_attach		(struct usb_serial *serial);
 static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id);
 static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id);
 
+/* Parameters that may be passed into the module. */
+static int vendor = -1;
+static int product = -1;
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
@@ -223,6 +230,7 @@ static struct usb_device_id id_table [] = {
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ },					/* optional parameter entry */
 	{ }					/* Terminating entry */
 };
 
@@ -250,6 +258,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
+	{ },					/* optional parameter entry */
 	{ }					/* Terminating entry */
 };
 
@@ -942,6 +951,33 @@ static void visor_set_termios (struct usb_serial_port *port, struct termios *old
 
 static int __init visor_init (void)
 {
+	int i;
+	/* Only if parameters were passed to us */
+	if ((vendor>0) && (product>0)) {
+		struct usb_device_id usb_dev_temp[]=
+			{{USB_DEVICE(vendor, product),
+			.driver_info = (kernel_ulong_t)&palm_os_4_probe }};
+
+		/* Find the last entry in id_table */
+		for (i=0; ; i++) {
+			if (id_table[i].idVendor==0) {
+				id_table[i] = usb_dev_temp[0];
+				break;
+			}
+		}
+		/* Find the last entry in id_table_combined */
+		for (i=0; ; i++) {
+			if (id_table_combined[i].idVendor==0) {
+				id_table_combined[i] = usb_dev_temp[0];
+				break;
+			}
+		}
+		info("Untested USB device specified at time of module insertion");
+		info("Warning: This is not guaranteed to work");
+		info("Using a newer kernel is preferred to this method");
+		info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
+			vendor, product);
+	}
 	usb_serial_register (&handspring_device);
 	usb_serial_register (&clie_3_5_device);
 	usb_register (&visor_driver);
@@ -969,3 +1005,7 @@ MODULE_LICENSE("GPL");
 MODULE_PARM(debug, "i");
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
+MODULE_PARM(vendor, "i");
+MODULE_PARM_DESC(vendor, "User specified vendor ID");
+MODULE_PARM(product, "i");
+MODULE_PARM_DESC(product, "User specified product ID");

drivers/usb/storage/initializers.c

@@ -41,6 +41,7 @@
 #include <linux/errno.h>
 #include "initializers.h"
 #include "debug.h"
+#include "transport.h"
 
 /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
  * mode */
@@ -59,4 +60,50 @@ int usb_stor_euscsi_init(struct us_data *us)
 	return 0;
 }
 
+/* This function is required to activate all four slots on the UCR-61S2B
+ * flash reader */
 
+int usb_stor_ucr61s2b_init(struct us_data *us)
+{
+	struct bulk_cb_wrap *bcb;
+	struct bulk_cs_wrap *bcs;
+	int res, partial;
+
+	bcb = kmalloc(sizeof *bcb, in_interrupt() ? GFP_ATOMIC : GFP_NOIO);
+	if (!bcb) {
+		return(-1);
+	}
+	bcs = kmalloc(sizeof *bcs, in_interrupt() ? GFP_ATOMIC : GFP_NOIO);
+	if (!bcs) {
+		kfree(bcb);
+		return(-1);
+	}
+
+	US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
+
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->Tag = 0;
+	bcb->DataTransferLength = cpu_to_le32(0);
+	bcb->Flags = bcb->Lun = 0;
+	bcb->Length = sizeof(UCR61S2B_INIT);
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, UCR61S2B_INIT, sizeof(UCR61S2B_INIT));
+
+	res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
+			US_BULK_CB_WRAP_LEN, &partial);
+	US_DEBUGP("-- result is %d\n", res);
+	kfree(bcb);
+
+	if(res) {
+		kfree(bcs);
+		return(res);
+	}
+
+	res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
+			US_BULK_CS_WRAP_LEN, &partial);
+	US_DEBUGP("-- result of status read is %d\n", res);
+
+	kfree(bcs);
+
+	return(res ? -1 : 0);
+}

drivers/usb/storage/initializers.h

@@ -48,3 +48,9 @@ int usb_stor_euscsi_init(struct us_data *us);
 #ifdef CONFIG_USB_STORAGE_SDDR09
 int sddr09_init(struct us_data *us);
 #endif
+
+#define UCR61S2B_INIT "\xec\x0a\x06\x00$PCCHIPS"
+
+/* This function is required to activate all four slots on the UCR-61S2B
+ * flash reader */
+int usb_stor_ucr61s2b_init(struct us_data *us);

drivers/usb/storage/unusual_devs.h

@@ -595,6 +595,16 @@ UNUSUAL_DEV(  0x0a16, 0x8888, 0x0100, 0x0100,
 		US_SC_SCSI, US_PR_BULK, NULL,
 		US_FL_FIX_INQUIRY ),
 		
+/* Pentax Optio S digital camera
+ * adapted from http://www2.goldfisch.at/knowledge/233
+ * (Peter Pilsl <pilsl@goldfisch.at>)
+ * by Christoph Weidemann <cweidema@indiana.edu> */
+UNUSUAL_DEV(  0x0a17, 0x0006, 0x0000, 0xffff,
+		"Pentax",
+		"Optio S",
+		US_SC_8070, US_PR_CB, NULL,
+		US_FL_MODE_XLATE|US_FL_FIX_INQUIRY),
+
 #ifdef CONFIG_USB_STORAGE_ISD200
 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
 		"ATI",
@@ -610,6 +620,16 @@ UNUSUAL_DEV(  0x1065, 0x2136, 0x0000, 0x0001,
 		US_SC_SCSI, US_PR_BULK, NULL,
 		US_FL_MODE_XLATE | US_FL_FIX_INQUIRY ),
 
+/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+ * Tested on hardware version 1.10.
+ * Entry is needed only for the initializer function override.
+ */
+UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x9999,
+		"Desknote",
+		"UCR-61S2B",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
+		0 ),
+
 /* Reported by Dan Pilone <pilone@slac.com>
  * The device needs the flags only.
  * Also reported by Brian Hall <brihall@pcisys.net>, again for flags.

include/linux/usb_gadget.h

@@ -10,11 +10,6 @@
  * All Rights Reserved.
  *
  * This software is licensed under the GNU GPL version 2.
- *
- * ALTERNATIVELY, the kernel API documentation which is included in this
- * software may also be licenced under the "GNU Free Documentation
- * License" (version 1.2 or, at your choice, any later version), when
- * used as part of the "USB Gadget API for Linux" documentation.
  */
 
 #ifndef __LINUX_USB_GADGET_H