Commit 341deefe authored by Philip Rakity's avatar Philip Rakity Committed by Dmitry Torokhov

Input: tsc2007 - make sure that X plate resistance is specified

Abort driver initialization if X plate resistance was not specified in
platform data as it will cause pressure to be always calculated as 0,
and making userspace ignore touch coordinates.
Signed-off-by: default avatarPhilip Rakity <prakity@marvell.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 550eca7c
...@@ -310,6 +310,12 @@ static int __devinit tsc2007_probe(struct i2c_client *client, ...@@ -310,6 +310,12 @@ static int __devinit tsc2007_probe(struct i2c_client *client,
ts->get_pendown_state = pdata->get_pendown_state; ts->get_pendown_state = pdata->get_pendown_state;
ts->clear_penirq = pdata->clear_penirq; ts->clear_penirq = pdata->clear_penirq;
if (pdata->x_plate_ohms == 0) {
dev_err(&client->dev, "x_plate_ohms is not set up in platform data");
err = -EINVAL;
goto err_free_mem;
}
snprintf(ts->phys, sizeof(ts->phys), snprintf(ts->phys, sizeof(ts->phys),
"%s/input0", dev_name(&client->dev)); "%s/input0", dev_name(&client->dev));
......
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
struct tsc2007_platform_data { struct tsc2007_platform_data {
u16 model; /* 2007. */ u16 model; /* 2007. */
u16 x_plate_ohms; u16 x_plate_ohms; /* must be non-zero value */
u16 max_rt; /* max. resistance above which samples are ignored */ u16 max_rt; /* max. resistance above which samples are ignored */
unsigned long poll_delay; /* delay (in ms) after pen-down event unsigned long poll_delay; /* delay (in ms) after pen-down event
before polling starts */ before polling starts */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment