Commit 34833558 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: pcl711: tidy up multi line comments

Tidy up the multi line comments to follow the CodingStyle.

Remove the multi line comment about an alternate driver for the
PCL-711. The http address does not work and the driver history
in the comment is unnecessary.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 102e95cd
/*
comedi/drivers/pcl711.c
hardware driver for PC-LabCard PCL-711 and AdSys ACL-8112
and compatibles
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 1998 David A. Schleef <ds@schleef.org>
Janne Jalkanen <jalkanen@cs.hut.fi>
Eric Bunn <ebu@cs.hut.fi>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
* pcl711.c
* Comedi driver for PC-LabCard PCL-711 and AdSys ACL-8112 and compatibles
* Copyright (C) 1998 David A. Schleef <ds@schleef.org>
* Janne Jalkanen <jalkanen@cs.hut.fi>
* Eric Bunn <ebu@cs.hut.fi>
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1998 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
Driver: pcl711
Description: Advantech PCL-711 and 711b, ADLink ACL-8112
Author: ds, Janne Jalkanen <jalkanen@cs.hut.fi>, Eric Bunn <ebu@cs.hut.fi>
Status: mostly complete
Devices: [Advantech] PCL-711 (pcl711), PCL-711B (pcl711b),
[AdLink] ACL-8112HG (acl8112hg), ACL-8112DG (acl8112dg)
Since these boards do not have DMA or FIFOs, only immediate mode is
supported.
*/
/*
Dave Andruczyk <dave@tech.buffalostate.edu> also wrote a
driver for the PCL-711. I used a few ideas from his driver
here. His driver also has more comments, if you are
interested in understanding how this driver works.
http://tech.buffalostate.edu/~dave/driver/
The ACL-8112 driver was hacked from the sources of the PCL-711
driver (the 744 chip used on the 8112 is almost the same as
the 711b chip, but it has more I/O channels) by
Janne Jalkanen (jalkanen@cs.hut.fi) and
Erik Bunn (ebu@cs.hut.fi). Remerged with the PCL-711 driver
by ds.
[acl-8112]
This driver supports both TRIGNOW and TRIGCLK,
but does not yet support DMA transfers. It also supports
both high (HG) and low (DG) versions of the card, though
the HG version has been untested.
* Driver: pcl711
* Description: Advantech PCL-711 and 711b, ADLink ACL-8112
* Devices: (Advantech) PCL-711 [pcl711]
* (Advantech) PCL-711B [pcl711b]
* (AdLink) ACL-8112HG [acl8112hg]
* (AdLink) ACL-8112DG [acl8112dg]
* Author: David A. Schleef <ds@schleef.org>
* Janne Jalkanen <jalkanen@cs.hut.fi>
* Eric Bunn <ebu@cs.hut.fi>
* Updated:
* Status: mostly complete
*
* Configuration Options:
* [0] - I/O port base
* [1] - IRQ, optional
*/
#include <linux/module.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment