Commit 34c09578 authored by Bart Westgeest's avatar Bart Westgeest Committed by Greg Kroah-Hartman

staging: usbip: removed #if 0'd out code

Signed-off-by: default avatarBart Westgeest <bart@elbrys.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ac2b41ac
...@@ -367,15 +367,6 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir) ...@@ -367,15 +367,6 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir)
} }
epd = &ep->desc; epd = &ep->desc;
#if 0
/* epnum 0 is always control */
if (epnum == 0) {
if (dir == USBIP_DIR_OUT)
return usb_sndctrlpipe(udev, 0);
else
return usb_rcvctrlpipe(udev, 0);
}
#endif
if (usb_endpoint_xfer_control(epd)) { if (usb_endpoint_xfer_control(epd)) {
if (dir == USBIP_DIR_OUT) if (dir == USBIP_DIR_OUT)
return usb_sndctrlpipe(udev, epnum); return usb_sndctrlpipe(udev, epnum);
......
...@@ -386,29 +386,6 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, ...@@ -386,29 +386,6 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
dum->port_status[rhport] |= dum->port_status[rhport] |=
USB_PORT_STAT_ENABLE; USB_PORT_STAT_ENABLE;
} }
#if 0
if (dum->driver) {
dum->port_status[rhport] |=
USB_PORT_STAT_ENABLE;
/* give it the best speed we agree on */
dum->gadget.speed = dum->driver->speed;
dum->gadget.ep0->maxpacket = 64;
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
dum->port_status[rhport] |=
USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->gadget.ep0->maxpacket = 8;
dum->port_status[rhport] |=
USB_PORT_STAT_LOW_SPEED;
break;
default:
dum->gadget.speed = USB_SPEED_FULL;
break;
}
}
#endif
} }
((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]); ((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
((u16 *) buf)[1] = cpu_to_le16(dum->port_status[rhport] >> 16); ((u16 *) buf)[1] = cpu_to_le16(dum->port_status[rhport] >> 16);
...@@ -425,15 +402,6 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, ...@@ -425,15 +402,6 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case USB_PORT_FEAT_SUSPEND: case USB_PORT_FEAT_SUSPEND:
usbip_dbg_vhci_rh(" SetPortFeature: " usbip_dbg_vhci_rh(" SetPortFeature: "
"USB_PORT_FEAT_SUSPEND\n"); "USB_PORT_FEAT_SUSPEND\n");
#if 0
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_SUSPEND);
if (dum->driver->suspend) {
spin_unlock(&dum->lock);
dum->driver->suspend(&dum->gadget);
spin_lock(&dum->lock);
}
#endif
break; break;
case USB_PORT_FEAT_RESET: case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(" SetPortFeature: " usbip_dbg_vhci_rh(" SetPortFeature: "
...@@ -444,13 +412,6 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, ...@@ -444,13 +412,6 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
~(USB_PORT_STAT_ENABLE | ~(USB_PORT_STAT_ENABLE |
USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_LOW_SPEED |
USB_PORT_STAT_HIGH_SPEED); USB_PORT_STAT_HIGH_SPEED);
#if 0
if (dum->driver) {
dev_dbg(hardware, "disconnect\n");
stop_activity(dum, dum->driver);
}
#endif
/* FIXME test that code path! */ /* FIXME test that code path! */
} }
/* 50msec reset signaling */ /* 50msec reset signaling */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment