Skip to content

L
linux
Commit 355d1ef1 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt 

The i.MX device tree changes for 4.4:
 - Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D.
 - Add a few low power mode related devices and touch controller for
   i.MX6UL.
 - Add a number of devices for i.MX7D SDB board support, USB, Dual FEC,
   and eMMC5.0.
 - i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya
   LCD, touch and wifi support, add new boards Nitrogen6_Lite and
   Nitrogen6_Max.
 - Enable touch screen and NAND Flash controller for a few Vybrid
   devices.
 - Some random and small updates on LS1021A and MXS support.

* tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: ls1021a: Add quirk for Erratum A009116
  ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property
  ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names"
  ARM: dts: imx6: change the core clock of spdif
  ARM: dts: vf-colibri: enable NAND flash controller
  ARM: dts: vf610twr: add NAND flash controller peripherial
  ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
  ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
  ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
  ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
  of: Add Boundary Devices Inc. vendor prefix
  ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
  ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
  ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
  ARM: dts: imx6dql-nitrogen6x: add touchscreen support
  ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
  ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
  ARM: dts: vf500-colibri: Add device tree node for touchscreen support
  ARM: dts: i.MX35: fix cpu compatible value
  ARM: dts: i.MX31: fix cpu compatible value
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents de0b2a54 607e266c
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2963 additions and 114 deletions
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ 355d1ef1
......@@ -34,6 +34,7 @@ avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
buffalo Buffalo, Inc.
calxeda Calxeda
......
arch/arm/boot/dts/Makefile
View file @ 355d1ef1
......@@ -292,6 +292,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-hummingboard.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-pbab01.dtb \
imx6dl-rex-basic.dtb \
......@@ -321,6 +322,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
......
arch/arm/boot/dts/imx23.dtsi
View file @ 355d1ef1
......@@ -383,9 +383,11 @@ pxp@8002a000 {
};
ocotp@8002c000 {
compatible = "fsl,ocotp";
compatible = "fsl,imx23-ocotp", "fsl,ocotp";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x8002c000 0x2000>;
status = "disabled";
clocks = <&clks 15>;
};
axi-ahb@8002e000 {
......
arch/arm/boot/dts/imx28-evk.dts
View file @ 355d1ef1
......@@ -57,7 +57,7 @@ ssp2: ssp@80014000 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf016b";
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx28-m28evk.dts
View file @ 355d1ef1
......@@ -41,7 +41,7 @@ ssp2: ssp@80014000 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx28.dtsi
View file @ 355d1ef1
......@@ -936,9 +936,11 @@ pxp: pxp@8002a000 {
};
ocotp: ocotp@8002c000 {
compatible = "fsl,ocotp";
compatible = "fsl,imx28-ocotp", "fsl,ocotp";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x8002c000 0x2000>;
status = "disabled";
clocks = <&clks 25>;
};
axi-ahb@8002e000 {
......
arch/arm/boot/dts/imx31.dtsi
View file @ 355d1ef1
......@@ -25,7 +25,7 @@ cpus {
#size-cells = <0>;
cpu {
compatible = "arm,arm1136";
compatible = "arm,arm1136jf-s";
device_type = "cpu";
};
};
......
arch/arm/boot/dts/imx35.dtsi
View file @ 355d1ef1
......@@ -29,7 +29,7 @@ cpus {
#size-cells = <0>;
cpu {
compatible = "arm,arm1136";
compatible = "arm,arm1136jf-s";
device_type = "cpu";
};
};
......
arch/arm/boot/dts/imx50-evk.dts
View file @ 355d1ef1
......@@ -33,7 +33,7 @@ &cspi {
flash: m25p32@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p32", "m25p80";
compatible = "m25p32", "jedec,spi-nor";
spi-max-frequency = <25000000>;
reg = <1>;
......
arch/arm/boot/dts/imx53-smd.dts
View file @ 355d1ef1
......@@ -76,7 +76,7 @@ zigbee: mc1323@0 {
flash: m25p32@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "st,m25p";
compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
......
arch/arm/boot/dts/imx6dl-nit6xlite.dts 0 → 100644
View file @ 355d1ef1
/*
* Copyright 2015 Boundary Devices, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-nit6xlite.dtsi"
/ {
model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
};
arch/arm/boot/dts/imx6dl-nitrogen6x.dts
View file @ 355d1ef1
......@@ -3,12 +3,42 @@
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -16,6 +46,6 @@
#include "imx6qdl-nitrogen6x.dtsi"
/ {
model = "Freescale i.MX6 DualLite Nitrogen6x Board";
compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
};
arch/arm/boot/dts/imx6dl-rex-basic.dts
View file @ 355d1ef1
......@@ -23,7 +23,7 @@ memory {
&ecspi3 {
flash: m25p80@0 {
compatible = "sst,sst25vf016b";
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6dl-sabrelite.dts
View file @ 355d1ef1
......@@ -2,12 +2,42 @@
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
View file @ 355d1ef1
......@@ -109,7 +109,7 @@ &ecspi5 {
status = "okay";
flash: m25p80@0 {
compatible = "m25p80";
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6q-gw5400-a.dts
View file @ 355d1ef1
......@@ -145,7 +145,7 @@ &ecspi1 {
status = "okay";
flash: m25p80@0 {
compatible = "sst,w25q256";
compatible = "sst,w25q256", "jedec,spi-nor";
spi-max-frequency = <30000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6q-nitrogen6_max.dts 0 → 100644
View file @ 355d1ef1
/*
* Copyright 2015 Boundary Devices, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-nitrogen6_max.dtsi"
/ {
model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
};
&sata {
status = "okay";
};
arch/arm/boot/dts/imx6q-nitrogen6x.dts
View file @ 355d1ef1
......@@ -3,12 +3,42 @@
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -16,8 +46,8 @@
#include "imx6qdl-nitrogen6x.dtsi"
/ {
model = "Freescale i.MX6 Quad Nitrogen6x Board";
compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
};
&sata {
......
arch/arm/boot/dts/imx6q-rex-pro.dts
View file @ 355d1ef1
......@@ -23,7 +23,7 @@ memory {
&ecspi3 {
flash: m25p80@0 {
compatible = "sst,sst25vf032b";
compatible = "sst,sst25vf032b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6q-sabrelite.dts
View file @ 355d1ef1
......@@ -2,12 +2,42 @@
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
View file @ 355d1ef1
......@@ -109,7 +109,7 @@ &ecspi4 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11";
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
View file @ 355d1ef1
......@@ -141,7 +141,7 @@ &ecspi4 {
flash: m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11";
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
};
......
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
View file @ 355d1ef1
......@@ -38,7 +38,7 @@ &ecspi3 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf040b", "m25p80";
compatible = "sst,sst25vf040b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi 0 → 100644
View file @ 355d1ef1
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi 0 → 100644
View file @ 355d1ef1
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
View file @ 355d1ef1
......@@ -3,12 +3,42 @@
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
......@@ -65,6 +95,19 @@ reg_can_xcvr: regulator@3 {
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_wlan_vmmc: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan_vmmc>;
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
};
gpio-keys {
......@@ -124,7 +167,7 @@ sound {
mux-ext-port = <3>;
};
backlight_lcd {
backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
......@@ -142,6 +185,43 @@ backlight_lvds: backlight_lvds {
status = "okay";
};
lcd_display: display@di0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_j15>;
status = "okay";
port@0 {
reg = <0>;
lcd_display_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
lcd_display_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
};
};
};
lcd_panel {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcd_display_out>;
};
};
};
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
......@@ -182,7 +262,7 @@ &ecspi1 {
status = "okay";
flash: m25p80@0 {
compatible = "sst,sst25vf016b";
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......@@ -247,6 +327,21 @@ &i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
touchscreen@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
touchscreen@38 {
compatible = "edt,edt-ft5x06";
reg = <0x38>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
};
};
&iomuxc {
......@@ -258,6 +353,7 @@ pinctrl_hog: hoggrp {
fsl,pins = <
/* SGTL5000 sys_mclk */
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
>;
};
......@@ -354,6 +450,39 @@ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_j15: j15grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
......@@ -395,6 +524,18 @@ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
......@@ -418,9 +559,22 @@ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
>;
};
pinctrl_wlan_vmmc: wlan_vmmcgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0
MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
>;
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&lcd_display_in>;
};
&ldb {
status = "okay";
......@@ -489,6 +643,27 @@ &usbotg {
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wlan_vmmc>;
cap-power-off-card;
keep-power-in-suspend;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio6>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
ref-clock-frequency = <38400000>;
};
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
......
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
View file @ 355d1ef1
......@@ -12,7 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Phytec phyFLEX-i.MX6 Ouad";
model = "Phytec phyFLEX-i.MX6 Quad";
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory {
......@@ -80,7 +80,7 @@ &ecspi3 {
cs-gpios = <&gpio4 24 0>;
flash@0 {
compatible = "m25p80";
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......@@ -373,7 +373,7 @@ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
};
&pcie {
pinctrl-name = "default";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio4 17 0>;
status = "disabled";
......
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
View file @ 355d1ef1
......@@ -133,7 +133,7 @@ &ecspi1 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32";
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
View file @ 355d1ef1
......@@ -2,12 +2,42 @@
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
......@@ -123,7 +153,7 @@ sound {
mux-ext-port = <4>;
};
backlight_lcd {
backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
......@@ -141,6 +171,43 @@ backlight_lvds: backlight_lvds {
status = "okay";
};
lcd_display: display@di0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_j15>;
status = "okay";
port@0 {
reg = <0>;
lcd_display_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
lcd_display_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
};
};
};
lcd_panel {
compatible = "okaya,rs800480t-7x0gp";
backlight = <&backlight_lcd>;
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcd_display_out>;
};
};
};
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
......@@ -181,7 +248,7 @@ &ecspi1 {
status = "okay";
flash: m25p80@0 {
compatible = "sst,sst25vf016b";
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......@@ -348,6 +415,39 @@ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_j15: j15grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
......@@ -416,6 +516,10 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&lcd_display_in>;
};
&ldb {
status = "okay";
......
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View file @ 355d1ef1
......@@ -158,7 +158,7 @@ &ecspi1 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32";
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6qdl.dtsi
View file @ 355d1ef1
......@@ -218,16 +218,16 @@ spdif: spdif@02004000 {
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
<&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
<&clks IMX6QDL_CLK_DUMMY>;
clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
<&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
<&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7";
"rxtx7", "dma";
status = "disabled";
};
......
arch/arm/boot/dts/imx6sl-evk.dts
View file @ 355d1ef1
......@@ -126,7 +126,7 @@ &ecspi1 {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32";
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
};
......
arch/arm/boot/dts/imx6sl.dtsi
View file @ 355d1ef1
......@@ -135,8 +135,24 @@ spba: spba-bus@02000000 {
ranges;
spdif: spdif@02004000 {
compatible = "fsl,imx6sl-spdif",
"fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
<&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
<&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
<&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
<&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7", "dma";
status = "disabled";
};
ecspi1: ecspi@02008000 {
......@@ -670,8 +686,11 @@ lcdif: lcdif@020f8000 {
};
dcp: dcp@020fc000 {
compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
reg = <0x020fc000 0x4000>;
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
<0 100 IRQ_TYPE_LEVEL_HIGH>,
<0 101 IRQ_TYPE_LEVEL_HIGH>;
};
};
......
arch/arm/boot/dts/imx6sx-sdb-reva.dts
View file @ 355d1ef1
......@@ -129,7 +129,7 @@ flash0: s25fl128s@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl128s";
compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
......@@ -137,7 +137,7 @@ flash1: s25fl128s@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl128s";
compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
};
arch/arm/boot/dts/imx6sx-sdb.dts
View file @ 355d1ef1
......@@ -130,7 +130,7 @@ &qspi2 {
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <0>;
};
......@@ -138,7 +138,7 @@ flash0: n25q256a@0 {
flash1: n25q256a@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <1>;
};
......
arch/arm/boot/dts/imx6sx-sdb.dtsi
View file @ 355d1ef1
......@@ -114,7 +114,7 @@ reg_peri_3v3: regulator@5 {
regulator-name = "peri_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
......
arch/arm/boot/dts/imx6sx.dtsi
View file @ 355d1ef1
......@@ -211,7 +211,7 @@ spdif: spdif@02004000 {
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SX_CLK_SPDIF>,
clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
<&clks IMX6SX_CLK_OSC>,
<&clks IMX6SX_CLK_SPDIF>,
<&clks 0>, <&clks 0>, <&clks 0>,
......
arch/arm/boot/dts/imx6ul-14x14-evk.dts
View file @ 355d1ef1
......@@ -87,6 +87,19 @@ flash0: n25q256a@0 {
};
};
&snvs_poweroff {
status = "okay";
};
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xfff>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
......@@ -277,6 +290,15 @@ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008
>;
};
pinctrl_tsc: tscgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
......
arch/arm/boot/dts/imx6ul.dtsi
View file @ 355d1ef1
......@@ -135,6 +135,11 @@ pmu {
status = "disabled";
};
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
};
aips1: aips-bus@02000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
......@@ -424,6 +429,14 @@ snvs_rtc: snvs-rtc-lp {
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs_poweroff: snvs-poweroff {
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
mask = <0x60>;
status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
......@@ -571,6 +584,17 @@ fec1: ethernet@02188000 {
status = "disabled";
};
tsc: tsc@02040000 {
compatible = "fsl,imx6ul-tsc";
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_ADC2>;
clock-names = "tsc", "adc";
status = "disabled";
};
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
......@@ -625,6 +649,11 @@ i2c3: i2c@021a8000 {
status = "disabled";
};
mmdc: mmdc@021b0000 {
compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
qspi: qspi@021e0000 {
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx7d-pinfunc.h
View file @ 355d1ef1
This diff is collapsed.
arch/arm/boot/dts/imx7d-sdb.dts
View file @ 355d1ef1
......@@ -101,6 +101,45 @@ &cpu0 {
arm-supply = <&sw1a_reg>;
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
<&clks IMX7D_ENET2_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
fsl,magic-packet;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
......@@ -231,6 +270,17 @@ &uart1 {
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_otg2_vbus>;
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
......@@ -241,11 +291,60 @@ &usdhc1 {
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
non-removable;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx7d-sdb {
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
......@@ -281,7 +380,6 @@ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
......
arch/arm/boot/dts/imx7d.dtsi
View file @ 355d1ef1
......@@ -446,6 +446,12 @@ wdog4: wdog@302b0000 {
status = "disabled";
};
iomuxc_lpsr: iomuxc-lpsr@302c0000 {
compatible = "fsl,imx7d-iomuxc-lpsr";
reg = <0x302c0000 0x10000>;
fsl,input-sel = <&iomuxc>;
};
gpt1: gpt@302d0000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302d0000 0x10000>;
......@@ -570,6 +576,58 @@ src: src@30390000 {
};
};
aips2: aips-bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30400000 0x400000>;
ranges;
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
<&clks IMX7D_PWM1_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm2: pwm@30670000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30670000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
<&clks IMX7D_PWM2_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm3: pwm@30680000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30680000 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
<&clks IMX7D_PWM3_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm4: pwm@30690000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30690000 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
<&clks IMX7D_PWM4_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
};
aips3: aips-bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
......@@ -694,6 +752,77 @@ uart7: serial@30a90000 {
status = "disabled";
};
usbotg1: usb@30b10000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b10000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
phy-clkgate-delay-us = <400>;
status = "disabled";
};
usbotg2: usb@30b20000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b20000 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
phy-clkgate-delay-us = <400>;
status = "disabled";
};
usbh: usb@30b30000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b30000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop3>;
fsl,usbmisc = <&usbmisc3 0>;
phy_type = "hsic";
dr_mode = "host";
phy-clkgate-delay-us = <400>;
status = "disabled";
};
usbmisc1: usbmisc@30b10200 {
#index-cells = <1>;
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x30b10200 0x200>;
};
usbmisc2: usbmisc@30b20200 {
#index-cells = <1>;
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x30b20200 0x200>;
};
usbmisc3: usbmisc@30b30200 {
#index-cells = <1>;
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x30b30200 0x200>;
};
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_PHY1_CLK>;
clock-names = "main_clk";
};
usbphynop2: usbphynop2 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_PHY2_CLK>;
clock-names = "main_clk";
};
usbphynop3: usbphynop3 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
clock-names = "main_clk";
};
usdhc1: usdhc@30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
......@@ -729,6 +858,42 @@ usdhc3: usdhc@30b60000 {
bus-width = <4>;
status = "disabled";
};
fec1: ethernet@30be0000 {
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
status = "disabled";
};
fec2: ethernet@30bf0000 {
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
reg = <0x30bf0000 0x10000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
status = "disabled";
};
};
};
};
arch/arm/boot/dts/ls1021a-twr.dts
View file @ 355d1ef1
......@@ -144,6 +144,19 @@ &enet2 {
&i2c0 {
status = "okay";
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
&i2c1 {
......
arch/arm/boot/dts/ls1021a.dtsi
View file @ 355d1ef1
......@@ -53,6 +53,7 @@ / {
interrupt-parent = <&gic>;
aliases {
crypto = &crypto;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
......@@ -148,6 +149,45 @@ scfg: scfg@1570000 {
big-endian;
};
crypto: crypto@1700000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <7>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x1700000 0x0 0x100000>;
ranges = <0x0 0x0 0x1700000 0x100000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
};
clockgen: clocking@1ee1000 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -405,6 +445,7 @@ enet0: ethernet@2d10000 {
model = "eTSEC";
fsl,magic-packet;
ranges;
dma-coherent;
queue-group@2d10000 {
#address-cells = <2>;
......@@ -433,6 +474,7 @@ enet1: ethernet@2d50000 {
interrupt-parent = <&gic>;
model = "eTSEC";
ranges;
dma-coherent;
queue-group@2d50000 {
#address-cells = <2>;
......@@ -461,6 +503,7 @@ enet2: ethernet@2d90000 {
interrupt-parent = <&gic>;
model = "eTSEC";
ranges;
dma-coherent;
queue-group@2d90000 {
#address-cells = <2>;
......@@ -494,6 +537,7 @@ usb3@3100000 {
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
};
};
arch/arm/boot/dts/vf-colibri.dtsi
View file @ 355d1ef1
......@@ -52,6 +52,26 @@ &i2c0 {
pinctrl-0 = <&pinctrl_i2c0>;
};
&nfc {
assigned-clocks = <&clks VF610_CLK_NFC>;
assigned-clock-rates = <33000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
status = "okay";
nand@0 {
compatible = "fsl,vf610-nfc-nandcs";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-ecc-strength = <32>;
nand-ecc-step-size = <2048>;
nand-on-flash-bbt;
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
......@@ -156,6 +176,25 @@ VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
VF610_PAD_PTD23__NF_IO7 0x28df
VF610_PAD_PTD22__NF_IO6 0x28df
VF610_PAD_PTD21__NF_IO5 0x28df
VF610_PAD_PTD20__NF_IO4 0x28df
VF610_PAD_PTD19__NF_IO3 0x28df
VF610_PAD_PTD18__NF_IO2 0x28df
VF610_PAD_PTD17__NF_IO1 0x28df
VF610_PAD_PTD16__NF_IO0 0x28df
VF610_PAD_PTB24__NF_WE_B 0x28c2
VF610_PAD_PTB25__NF_CE0_B 0x28c2
VF610_PAD_PTB27__NF_RE_B 0x28c2
VF610_PAD_PTC26__NF_RB_B 0x283d
VF610_PAD_PTC27__NF_ALE 0x28c2
VF610_PAD_PTC28__NF_CLE 0x28c2
>;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1182
......
arch/arm/boot/dts/vf500-colibri-eval-v3.dts
View file @ 355d1ef1
......@@ -15,3 +15,8 @@ / {
model = "Toradex Colibri VF50 on Colibri Evaluation Board";
compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
};
&touchscreen {
vf50-ts-min-pressure = <200>;
status = "okay";
};
arch/arm/boot/dts/vf500-colibri.dtsi
View file @ 355d1ef1
......@@ -17,4 +17,51 @@ / {
memory {
reg = <0x80000000 0x8000000>;
};
touchscreen: vf50-touchscreen {
compatible = "toradex,vf50-touchscreen";
io-channels = <&adc1 0>,<&adc0 0>,
<&adc0 1>,<&adc1 2>;
xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gpio0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "idle","default","gpios";
pinctrl-0 = <&pinctrl_touchctrl_idle>;
pinctrl-1 = <&pinctrl_touchctrl_default>;
pinctrl-2 = <&pinctrl_touchctrl_gpios>;
vf50-ts-min-pressure = <200>;
status = "disabled";
};
};
&iomuxc {
vf610-colibri {
pinctrl_touchctrl_idle: touchctrl_idle {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x006d
VF610_PAD_PTA19__GPIO_9 0x006c
>;
};
pinctrl_touchctrl_default: touchctrl_default {
fsl,pins = <
VF610_PAD_PTA18__ADC0_SE0 0x0040
VF610_PAD_PTA19__ADC0_SE1 0x0040
VF610_PAD_PTA16__ADC1_SE0 0x0040
VF610_PAD_PTB2__ADC1_SE2 0x0040
>;
};
pinctrl_touchctrl_gpios: touchctrl_gpios {
fsl,pins = <
VF610_PAD_PTA23__GPIO_13 0x22e9
VF610_PAD_PTB23__GPIO_93 0x22e9
VF610_PAD_PTA22__GPIO_12 0x22e9
VF610_PAD_PTA11__GPIO_4 0x22e9
>;
};
};
};
arch/arm/boot/dts/vf610-twr.dts
View file @ 355d1ef1
......@@ -237,6 +237,33 @@ VF610_PAD_PTB15__I2C0_SDA 0x30d3
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
VF610_PAD_PTD31__NF_IO15 0x28df
VF610_PAD_PTD30__NF_IO14 0x28df
VF610_PAD_PTD29__NF_IO13 0x28df
VF610_PAD_PTD28__NF_IO12 0x28df
VF610_PAD_PTD27__NF_IO11 0x28df
VF610_PAD_PTD26__NF_IO10 0x28df
VF610_PAD_PTD25__NF_IO9 0x28df
VF610_PAD_PTD24__NF_IO8 0x28df
VF610_PAD_PTD23__NF_IO7 0x28df
VF610_PAD_PTD22__NF_IO6 0x28df
VF610_PAD_PTD21__NF_IO5 0x28df
VF610_PAD_PTD20__NF_IO4 0x28df
VF610_PAD_PTD19__NF_IO3 0x28df
VF610_PAD_PTD18__NF_IO2 0x28df
VF610_PAD_PTD17__NF_IO1 0x28df
VF610_PAD_PTD16__NF_IO0 0x28df
VF610_PAD_PTB24__NF_WE_B 0x28c2
VF610_PAD_PTB25__NF_CE0_B 0x28c2
VF610_PAD_PTB27__NF_RE_B 0x28c2
VF610_PAD_PTC26__NF_RB_B 0x283d
VF610_PAD_PTC27__NF_ALE 0x28c2
VF610_PAD_PTC28__NF_CLE 0x28c2
>;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1582
......@@ -274,6 +301,26 @@ VF610_PAD_PTB7__UART2_RX 0x21a1
};
};
&nfc {
assigned-clocks = <&clks VF610_CLK_NFC>;
assigned-clock-rates = <33000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
status = "okay";
nand@0 {
compatible = "fsl,vf610-nfc-nandcs";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-ecc-strength = <24>;
nand-ecc-step-size = <2048>;
nand-on-flash-bbt;
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
......
arch/arm/boot/dts/vfxxx.dtsi
View file @ 355d1ef1
......@@ -564,6 +564,17 @@ can1: flexcan@400d4000 {
status = "disabled";
};
nfc: nand@400e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-nfc";
reg = <0x400e0000 0x4000>;
interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_NFC>;
clock-names = "nfc";
status = "disabled";
};
i2c2: i2c@400e6000 {
#address-cells = <1>;
#size-cells = <0>;
......
drivers/clk/imx/clk-imx25.c
View file @ 355d1ef1
......@@ -86,6 +86,16 @@ enum mx25_clks {
static struct clk *clk[clk_max];
static struct clk ** const uart_clks[] __initconst = {
&clk[uart_ipg_per],
&clk[uart1_ipg],
&clk[uart2_ipg],
&clk[uart3_ipg],
&clk[uart4_ipg],
&clk[uart5_ipg],
NULL
};
static int __init __mx25_clocks_init(unsigned long osc_rate,
void __iomem *ccm_base)
{
......@@ -233,6 +243,8 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
*/
clk_set_parent(clk[cko_sel], clk[ipg]);
imx_register_uart_clocks(uart_clks);
return 0;
}
......
drivers/clk/imx/clk-imx27.c
View file @ 355d1ef1
......@@ -47,6 +47,17 @@ static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
static struct clk ** const uart_clks[] __initconst = {
&clk[IMX27_CLK_PER1_GATE],
&clk[IMX27_CLK_UART1_IPG_GATE],
&clk[IMX27_CLK_UART2_IPG_GATE],
&clk[IMX27_CLK_UART3_IPG_GATE],
&clk[IMX27_CLK_UART4_IPG_GATE],
&clk[IMX27_CLK_UART5_IPG_GATE],
&clk[IMX27_CLK_UART6_IPG_GATE],
NULL
};
static void __init _mx27_clocks_init(unsigned long fref)
{
BUG_ON(!ccm);
......@@ -163,6 +174,8 @@ static void __init _mx27_clocks_init(unsigned long fref)
clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
imx_register_uart_clocks(uart_clks);
imx_print_silicon_rev("i.MX27", mx27_revision());
}
......
drivers/clk/imx/clk-imx31.c
View file @ 355d1ef1
......@@ -62,7 +62,17 @@ enum mx31_clks {
static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
int __init mx31_clocks_init(unsigned long fref)
static struct clk ** const uart_clks[] __initconst = {
&clk[ipg],
&clk[uart1_gate],
&clk[uart2_gate],
&clk[uart3_gate],
&clk[uart4_gate],
&clk[uart5_gate],
NULL
};
static void __init _mx31_clocks_init(unsigned long fref)
{
void __iomem *base;
struct device_node *np;
......@@ -132,6 +142,12 @@ int __init mx31_clocks_init(unsigned long fref)
imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_set_parent(clk[csi], clk[upll]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[iim_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
if (np) {
......@@ -139,6 +155,13 @@ int __init mx31_clocks_init(unsigned long fref)
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
}
int __init mx31_clocks_init(void)
{
u32 fref = 26000000; /* default */
_mx31_clocks_init(fref);
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
......@@ -194,12 +217,8 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
clk_set_parent(clk[csi], clk[upll]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[iim_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
imx_register_uart_clocks(uart_clks);
mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
return 0;
......@@ -218,5 +237,7 @@ int __init mx31_clocks_init_dt(void)
break;
}
return mx31_clocks_init(fref);
_mx31_clocks_init(fref);
return 0;
}
drivers/clk/imx/clk-imx35.c
View file @ 355d1ef1
......@@ -84,7 +84,15 @@ enum mx35_clks {
static struct clk *clk[clk_max];
int __init mx35_clocks_init(void)
static struct clk ** const uart_clks[] __initconst = {
&clk[ipg],
&clk[uart1_gate],
&clk[uart2_gate],
&clk[uart3_gate],
NULL
};
static void __init _mx35_clocks_init(void)
{
void __iomem *base;
u32 pdr0, consumer_sel, hsp_sel;
......@@ -220,6 +228,32 @@ int __init mx35_clocks_init(void)
imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_prepare_enable(clk[spba_gate]);
clk_prepare_enable(clk[gpio1_gate]);
clk_prepare_enable(clk[gpio2_gate]);
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[max_gate]);
clk_prepare_enable(clk[iomuxc_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
* before conversion to common clk also enabled UART1 (which isn't
* handled here and not needed for mmc) and IIM (which is enabled
* unconditionally above).
*/
clk_prepare_enable(clk[scc_gate]);
imx_register_uart_clocks(uart_clks);
imx_print_silicon_rev("i.MX35", mx35_revision());
}
int __init mx35_clocks_init(void)
{
_mx35_clocks_init();
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
......@@ -279,25 +313,6 @@ int __init mx35_clocks_init(void)
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_register_clkdev(clk[admux_gate], "audmux", NULL);
clk_prepare_enable(clk[spba_gate]);
clk_prepare_enable(clk[gpio1_gate]);
clk_prepare_enable(clk[gpio2_gate]);
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
clk_prepare_enable(clk[max_gate]);
clk_prepare_enable(clk[iomuxc_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
* before conversion to common clk also enabled UART1 (which isn't
* handled here and not needed for mmc) and IIM (which is enabled
* unconditionally above).
*/
clk_prepare_enable(clk[scc_gate]);
imx_print_silicon_rev("i.MX35", mx35_revision());
mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31);
return 0;
......@@ -305,10 +320,10 @@ int __init mx35_clocks_init(void)
static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
{
_mx35_clocks_init();
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
mx35_clocks_init();
}
CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
drivers/clk/imx/clk-imx51-imx53.c
View file @ 355d1ef1
......@@ -130,6 +130,20 @@ static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
static struct clk ** const uart_clks[] __initconst = {
&clk[IMX5_CLK_UART1_IPG_GATE],
&clk[IMX5_CLK_UART1_PER_GATE],
&clk[IMX5_CLK_UART2_IPG_GATE],
&clk[IMX5_CLK_UART2_PER_GATE],
&clk[IMX5_CLK_UART3_IPG_GATE],
&clk[IMX5_CLK_UART3_PER_GATE],
&clk[IMX5_CLK_UART4_IPG_GATE],
&clk[IMX5_CLK_UART4_PER_GATE],
&clk[IMX5_CLK_UART5_IPG_GATE],
&clk[IMX5_CLK_UART5_PER_GATE],
NULL
};
static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
......@@ -310,6 +324,8 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
imx_register_uart_clocks(uart_clks);
}
static void __init mx50_clocks_init(struct device_node *np)
......
drivers/clk/imx/clk-imx6q.c
View file @ 355d1ef1
......@@ -119,6 +119,7 @@ static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
static unsigned int share_count_mipi_core_cfg;
static unsigned int share_count_spdif;
static inline int clk_on_imx6q(void)
{
......@@ -130,6 +131,12 @@ static inline int clk_on_imx6dl(void)
return of_machine_is_compatible("fsl,imx6dl");
}
static struct clk ** const uart_clks[] __initconst = {
&clk[IMX6QDL_CLK_UART_IPG],
&clk[IMX6QDL_CLK_UART_SERIAL],
NULL
};
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
......@@ -456,7 +463,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ahb", base + 0x7c, 4);
clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_spdif);
clk[IMX6QDL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif);
clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
......@@ -541,5 +549,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
drivers/clk/imx/clk-imx6sl.c
View file @ 355d1ef1
......@@ -97,6 +97,7 @@ static struct clk_div_table video_div_table[] = {
static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
static unsigned int share_count_spdif;
static struct clk *clks[IMX6SL_CLK_END];
static struct clk_onecell_data clk_data;
......@@ -184,6 +185,12 @@ void imx6sl_set_wait_clk(bool enter)
imx6sl_enable_pll_arm(false);
}
static struct clk ** const uart_clks[] __initconst = {
&clks[IMX6SL_CLK_UART],
&clks[IMX6SL_CLK_UART_SERIAL],
NULL
};
static void __init imx6sl_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
......@@ -391,7 +398,8 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6);
clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14);
clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif0_podf", base + 0x7c, 14, &share_count_spdif);
clks[IMX6SL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif);
clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
......@@ -439,5 +447,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
clks[IMX6SL_CLK_PLL2_PFD2]);
imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
drivers/clk/imx/clk-imx6sx.c
View file @ 355d1ef1
......@@ -135,6 +135,12 @@ static u32 share_count_ssi1;
static u32 share_count_ssi2;
static u32 share_count_ssi3;
static struct clk ** const uart_clks[] __initconst = {
&clks[IMX6SX_CLK_UART_IPG],
&clks[IMX6SX_CLK_UART_SERIAL],
NULL
};
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
......@@ -454,6 +460,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
......@@ -557,5 +564,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
drivers/clk/imx/clk-imx6ul.c
View file @ 355d1ef1
......@@ -407,6 +407,24 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
/*
* Lower the AHB clock rate before changing the parent clock source,
* as AHB clock rate can NOT be higher than 133MHz, but its parent
* will be switched from 396MHz PFD to 528MHz PLL in order to increase
* AXI clock rate, so we need to lower AHB rate first to make sure at
* any time, AHB rate is <= 133MHz.
*/
clk_set_rate(clks[IMX6UL_CLK_AHB], 99000000);
/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_CLK2]);
clk_set_parent(clks[IMX6UL_CLK_PERIPH_PRE], clks[IMX6UL_CLK_PLL2_BUS]);
clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_PRE]);
/* Make sure AHB rate is 132MHz */
clk_set_rate(clks[IMX6UL_CLK_AHB], 132000000);
/* set perclk to from OSC */
clk_set_parent(clks[IMX6UL_CLK_PERCLK_SEL], clks[IMX6UL_CLK_OSC]);
......
drivers/clk/imx/clk-imx7d.c
View file @ 355d1ef1
......@@ -363,6 +363,17 @@ static const char *pll_video_bypass_sel[] = { "pll_video_main", "pll_video_main_
static struct clk_onecell_data clk_data;
static struct clk ** const uart_clks[] __initconst = {
&clks[IMX7D_UART1_ROOT_CLK],
&clks[IMX7D_UART2_ROOT_CLK],
&clks[IMX7D_UART3_ROOT_CLK],
&clks[IMX7D_UART4_ROOT_CLK],
&clks[IMX7D_UART5_ROOT_CLK],
&clks[IMX7D_UART6_ROOT_CLK],
&clks[IMX7D_UART7_ROOT_CLK],
NULL
};
static void __init imx7d_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
......@@ -818,6 +829,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate2("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate2("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate2("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
clks[IMX7D_ADC_ROOT_CLK] = imx_clk_gate2("adc_root_clk", "ipg_root_clk", base + 0x4200, 0);
clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
......@@ -856,5 +868,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
/* set uart module clock's parent clock source that must be great then 80MHz */
clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
imx_register_uart_clocks(uart_clks);
}
CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
drivers/clk/imx/clk-vf610.c
View file @ 355d1ef1
......@@ -387,6 +387,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24);
clk[VF610_CLK_OCOTP] = imx_clk_gate("ocotp", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(5));
imx_check_clocks(clk, ARRAY_SIZE(clk));
......
drivers/clk/imx/clk.c
View file @ 355d1ef1
......@@ -73,3 +73,41 @@ void imx_cscmr1_fixup(u32 *val)
*val ^= CSCMR1_FIXUP;
return;
}
static int imx_keep_uart_clocks __initdata;
static struct clk ** const *imx_uart_clocks __initdata;
static int __init imx_keep_uart_clocks_param(char *str)
{
imx_keep_uart_clocks = 1;
return 0;
}
__setup_param("earlycon", imx_keep_uart_earlycon,
imx_keep_uart_clocks_param, 0);
__setup_param("earlyprintk", imx_keep_uart_earlyprintk,
imx_keep_uart_clocks_param, 0);
void __init imx_register_uart_clocks(struct clk ** const clks[])
{
if (imx_keep_uart_clocks) {
int i;
imx_uart_clocks = clks;
for (i = 0; imx_uart_clocks[i]; i++)
clk_prepare_enable(*imx_uart_clocks[i]);
}
}
static int __init imx_clk_disable_uart(void)
{
if (imx_keep_uart_clocks && imx_uart_clocks) {
int i;
for (i = 0; imx_uart_clocks[i]; i++)
clk_disable_unprepare(*imx_uart_clocks[i]);
}
return 0;
}
late_initcall_sync(imx_clk_disable_uart);
drivers/clk/imx/clk.h
View file @ 355d1ef1
......@@ -7,6 +7,7 @@
extern spinlock_t imx_ccm_lock;
void imx_check_clocks(struct clk *clks[], unsigned int count);
void imx_register_uart_clocks(struct clk ** const clks[]);
extern void imx_cscmr1_fixup(u32 *val);
......
include/dt-bindings/clock/imx6qdl-clock.h
View file @ 355d1ef1
......@@ -254,6 +254,7 @@
#define IMX6QDL_CLK_CAAM_MEM 241
#define IMX6QDL_CLK_CAAM_ACLK 242
#define IMX6QDL_CLK_CAAM_IPG 243
#define IMX6QDL_CLK_END 244
#define IMX6QDL_CLK_SPDIF_GCLK 244
#define IMX6QDL_CLK_END 245
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
include/dt-bindings/clock/imx6sl-clock.h
View file @ 355d1ef1
......@@ -174,6 +174,7 @@
#define IMX6SL_CLK_SSI1_IPG 161
#define IMX6SL_CLK_SSI2_IPG 162
#define IMX6SL_CLK_SSI3_IPG 163
#define IMX6SL_CLK_END 164
#define IMX6SL_CLK_SPDIF_GCLK 164
#define IMX6SL_CLK_END 165
#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
include/dt-bindings/clock/imx6sx-clock.h
View file @ 355d1ef1
......@@ -274,6 +274,7 @@
#define IMX6SX_PLL5_BYPASS 261
#define IMX6SX_PLL6_BYPASS 262
#define IMX6SX_PLL7_BYPASS 263
#define IMX6SX_CLK_CLK_END 264
#define IMX6SX_CLK_SPDIF_GCLK 264
#define IMX6SX_CLK_CLK_END 265
#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
include/dt-bindings/clock/imx7d-clock.h
View file @ 355d1ef1
......@@ -446,5 +446,6 @@
#define IMX7D_MU_ROOT_CLK 433
#define IMX7D_SEMA4_HS_ROOT_CLK 434
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_CLK_END 436
#define IMX7D_ADC_ROOT_CLK 436
#define IMX7D_CLK_END 437
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
include/dt-bindings/clock/vf610-clock.h
View file @ 355d1ef1
......@@ -194,6 +194,7 @@
#define VF610_PLL7_BYPASS 181
#define VF610_CLK_SNVS 182
#define VF610_CLK_DAP 183
#define VF610_CLK_END 184
#define VF610_CLK_OCOTP 184
#define VF610_CLK_END 185
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7