ASoC: Ux500: Add MSP I2S-driver

Add driver for running I2S with the MSP-block.
Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com>
[Fixed trailing whitespace -- broonie]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/Kconfig

@@ -47,6 +47,7 @@ source "sound/soc/s6000/Kconfig"
 source "sound/soc/sh/Kconfig"
 source "sound/soc/tegra/Kconfig"
 source "sound/soc/txx9/Kconfig"
+source "sound/soc/ux500/Kconfig"
 
 # Supported codecs
 source "sound/soc/codecs/Kconfig"

sound/soc/Makefile

@@ -25,3 +25,4 @@ obj-$(CONFIG_SND_SOC)	+= s6000/
 obj-$(CONFIG_SND_SOC)	+= sh/
 obj-$(CONFIG_SND_SOC)	+= tegra/
 obj-$(CONFIG_SND_SOC)	+= txx9/
+obj-$(CONFIG_SND_SOC)	+= ux500/

sound/soc/ux500/Kconfig

+#
+# Ux500 SoC audio configuration
+#
+menuconfig SND_SOC_UX500
+	tristate "SoC Audio support for Ux500 platform"
+	depends on SND_SOC
+	help
+		Say Y if you want to enable ASoC-support for
+		any of the Ux500 platforms (e.g. U8500).
+
+config SND_SOC_UX500_PLAT_MSP_I2S
+	tristate "Platform - MSP (I2S)"
+	depends on SND_SOC_UX500
+	help
+		Say Y if you want to enable the Ux500 MSP I2S-driver.

sound/soc/ux500/Makefile

+# Ux500 Platform Support
+
+snd-soc-ux500-plat-msp-i2s-objs := ux500_msp_dai.o ux500_msp_i2s.o
+obj-$(CONFIG_SND_SOC_UX500_PLAT_MSP_I2S) += snd-soc-ux500-plat-msp-i2s.o

sound/soc/ux500/ux500_msp_dai.h

+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Ola Lilja <ola.o.lilja@stericsson.com>,
+ *         Roger Nilsson <roger.xr.nilsson@stericsson.com>
+ *         for ST-Ericsson.
+ *
+ * License terms:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef UX500_msp_dai_H
+#define UX500_msp_dai_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include "ux500_msp_i2s.h"
+
+#define UX500_NBR_OF_DAI	4
+
+#define UX500_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |	\
+			SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
+
+#define UX500_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE)
+
+#define FRAME_PER_SINGLE_SLOT_8_KHZ		31
+#define FRAME_PER_SINGLE_SLOT_16_KHZ	124
+#define FRAME_PER_SINGLE_SLOT_44_1_KHZ	63
+#define FRAME_PER_SINGLE_SLOT_48_KHZ	49
+#define FRAME_PER_2_SLOTS				31
+#define FRAME_PER_8_SLOTS				138
+#define FRAME_PER_16_SLOTS				277
+
+#ifndef CONFIG_SND_SOC_UX500_AB5500
+#define UX500_MSP_INTERNAL_CLOCK_FREQ  40000000
+#define UX500_MSP1_INTERNAL_CLOCK_FREQ UX500_MSP_INTERNAL_CLOCK_FREQ
+#else
+#define UX500_MSP_INTERNAL_CLOCK_FREQ 13000000
+#define UX500_MSP1_INTERNAL_CLOCK_FREQ (UX500_MSP_INTERNAL_CLOCK_FREQ * 2)
+#endif
+
+#define UX500_MSP_MIN_CHANNELS		1
+#define UX500_MSP_MAX_CHANNELS		8
+
+#define PLAYBACK_CONFIGURED		1
+#define CAPTURE_CONFIGURED		2
+
+enum ux500_msp_clock_id {
+	UX500_MSP_MASTER_CLOCK,
+};
+
+struct ux500_msp_i2s_drvdata {
+	struct ux500_msp *msp;
+	struct regulator *reg_vape;
+	struct ux500_msp_dma_params playback_dma_data;
+	struct ux500_msp_dma_params capture_dma_data;
+	unsigned int fmt;
+	unsigned int tx_mask;
+	unsigned int rx_mask;
+	int slots;
+	int slot_width;
+	u8 configured;
+	int data_delay;
+
+	/* Clocks */
+	unsigned int master_clk;
+	struct clk *clk;
+
+	/* Regulators */
+	int vape_opp_constraint;
+};
+
+int ux500_msp_dai_set_data_delay(struct snd_soc_dai *dai, int delay);
+
+#endif