drm/vmwgfx: Implement screen targets

Add support for the screen target device interface.
Add a getparam parameter and bump minor to signal availability.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drivers/gpu/drm/vmwgfx/Makefile

@@ -7,6 +7,6 @@ vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.o vmwgfx_kms.o vmwgfx_drv.o \
 	    vmwgfx_overlay.o vmwgfx_marker.o vmwgfx_gmrid_manager.o \
 	    vmwgfx_fence.o vmwgfx_dmabuf.o vmwgfx_scrn.o vmwgfx_context.o \
 	    vmwgfx_surface.o vmwgfx_prime.o vmwgfx_mob.o vmwgfx_shader.o \
-	    vmwgfx_cmdbuf_res.o vmwgfx_cmdbuf.o \
+	    vmwgfx_cmdbuf_res.o vmwgfx_cmdbuf.o vmwgfx_stdu.o \
 
 obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o

drivers/gpu/drm/vmwgfx/vmwgfx_drv.c

@@ -693,22 +693,28 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 				 SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM);
 		dev_priv->max_mob_size =
 			vmw_read(dev_priv, SVGA_REG_MOB_MAX_SIZE);
+		dev_priv->stdu_max_width =
+			vmw_read(dev_priv, SVGA_REG_SCREENTARGET_MAX_WIDTH);
+		dev_priv->stdu_max_height =
+			vmw_read(dev_priv, SVGA_REG_SCREENTARGET_MAX_HEIGHT);
+
+		vmw_write(dev_priv, SVGA_REG_DEV_CAP,
+			  SVGA3D_DEVCAP_MAX_TEXTURE_WIDTH);
+		dev_priv->texture_max_width = vmw_read(dev_priv,
+						       SVGA_REG_DEV_CAP);
+		vmw_write(dev_priv, SVGA_REG_DEV_CAP,
+			  SVGA3D_DEVCAP_MAX_TEXTURE_HEIGHT);
+		dev_priv->texture_max_height = vmw_read(dev_priv,
+							SVGA_REG_DEV_CAP);
 	} else
 		dev_priv->prim_bb_mem = dev_priv->vram_size;
  
+	vmw_print_capabilities(dev_priv->capabilities);
+
 	ret = vmw_dma_masks(dev_priv);
 	if (unlikely(ret != 0))
 		goto out_err0;
 
-	/*
-	 * Limit back buffer size to VRAM size.  Remove this once
-	 * screen targets are implemented.
-	 */
-	if (dev_priv->prim_bb_mem > dev_priv->vram_size)
-		dev_priv->prim_bb_mem = dev_priv->vram_size;
-
-	vmw_print_capabilities(dev_priv->capabilities);
-
 	if (dev_priv->capabilities & SVGA_CAP_GMR2) {
 		DRM_INFO("Max GMR ids is %u\n",
 			 (unsigned)dev_priv->max_gmr_ids);

drivers/gpu/drm/vmwgfx/vmwgfx_drv.h

@@ -40,17 +40,17 @@
 #include <drm/ttm/ttm_module.h>
 #include "vmwgfx_fence.h"
 
-#define VMWGFX_DRIVER_DATE "20140704"
+#define VMWGFX_DRIVER_DATE "20150626"
 #define VMWGFX_DRIVER_MAJOR 2
-#define VMWGFX_DRIVER_MINOR 6
-#define VMWGFX_DRIVER_PATCHLEVEL 1
+#define VMWGFX_DRIVER_MINOR 7
+#define VMWGFX_DRIVER_PATCHLEVEL 0
 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000
 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
 #define VMWGFX_MAX_RELOCATIONS 2048
 #define VMWGFX_MAX_VALIDATIONS 2048
 #define VMWGFX_MAX_DISPLAYS 16
 #define VMWGFX_CMD_BOUNCE_INIT_SIZE 32768
-#define VMWGFX_ENABLE_SCREEN_TARGET_OTABLE 0
+#define VMWGFX_ENABLE_SCREEN_TARGET_OTABLE 1
 
 /*
  * Perhaps we should have sysfs entries for these.
@@ -337,7 +337,8 @@ struct vmw_ctx_binding_state {
 enum vmw_display_unit_type {
 	vmw_du_invalid = 0,
 	vmw_du_legacy,
-	vmw_du_screen_object
+	vmw_du_screen_object,
+	vmw_du_screen_target
 };
 
 
@@ -402,6 +403,10 @@ struct vmw_private {
 	uint32_t mmio_size;
 	uint32_t fb_max_width;
 	uint32_t fb_max_height;
+	uint32_t texture_max_width;
+	uint32_t texture_max_height;
+	uint32_t stdu_max_width;
+	uint32_t stdu_max_height;
 	uint32_t initial_width;
 	uint32_t initial_height;
 	__le32 __iomem *mmio_virt;

drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c

@@ -105,6 +105,10 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data,
 	case DRM_VMW_PARAM_MAX_MOB_SIZE:
 		param->value = dev_priv->max_mob_size;
 		break;
+	case DRM_VMW_PARAM_SCREEN_TARGET:
+		param->value =
+			(dev_priv->active_display_unit == vmw_du_screen_target);
+		break;
 	default:
 		DRM_ERROR("Illegal vmwgfx get param request: %d\n",
 			  param->param);

drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

@@ -463,6 +463,11 @@ static int vmw_framebuffer_surface_dirty(struct drm_framebuffer *framebuffer,
 						   flags, color,
 						   clips, num_clips,
 						   inc, NULL);
+	else
+		ret = vmw_kms_stdu_do_surface_dirty(dev_priv, file_priv,
+						    &vfbs->base,
+						    clips, num_clips,
+						    inc);
 
 	vmw_fifo_flush(dev_priv, false);
 	ttm_read_unlock(&dev_priv->reservation_sem);
@@ -636,6 +641,11 @@ static int vmw_framebuffer_dmabuf_dirty(struct drm_framebuffer *framebuffer,
 						  flags, color,
 						  clips, num_clips, increment,
 						  NULL);
+	} else {
+		ret = vmw_kms_stdu_do_surface_dirty(dev_priv, file_priv,
+						    &vfbd->base,
+						    clips, num_clips,
+						    increment);
 	}
 
 	vmw_fifo_flush(dev_priv, false);
@@ -999,8 +1009,6 @@ int vmw_kms_generic_present(struct vmw_private *dev_priv,
 			break;
 	}
 
-	vmw_fifo_flush(dev_priv, false);
-
 	kfree(cmd);
 out_free_tmp:
 	kfree(tmp);
@@ -1017,8 +1025,21 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 		    struct drm_vmw_rect *clips,
 		    uint32_t num_clips)
 {
-	return vmw_kms_generic_present(dev_priv, file_priv, vfb, surface, sid,
+	int ret;
+
+	if (dev_priv->active_display_unit == vmw_du_screen_target)
+		ret = vmw_kms_stdu_present(dev_priv, file_priv, vfb, sid,
 					   destX, destY, clips, num_clips);
+	else
+		ret = vmw_kms_generic_present(dev_priv, file_priv, vfb,
+					      surface, sid, destX, destY,
+					      clips, num_clips);
+	if (ret)
+		return ret;
+
+	vmw_fifo_flush(dev_priv, false);
+
+	return 0;
 }
 
 int vmw_kms_readback(struct vmw_private *dev_priv,
@@ -1141,9 +1162,12 @@ int vmw_kms_init(struct vmw_private *dev_priv)
 	dev->mode_config.max_width = 8192;
 	dev->mode_config.max_height = 8192;
 
+	ret = vmw_kms_stdu_init_display(dev_priv);
+	if (ret) {
 		ret = vmw_kms_sou_init_display(dev_priv);
 		if (ret) /* Fallback */
 			ret = vmw_kms_ldu_init_display(dev_priv);
+	}
 
 	return ret;
 }
@@ -1160,6 +1184,8 @@ int vmw_kms_close(struct vmw_private *dev_priv)
 	drm_mode_config_cleanup(dev_priv->dev);
 	if (dev_priv->active_display_unit == vmw_du_screen_object)
 		ret = vmw_kms_sou_close_display(dev_priv);
+	else if (dev_priv->active_display_unit == vmw_du_screen_target)
+		ret = vmw_kms_stdu_close_display(dev_priv);
 	else
 		ret = vmw_kms_ldu_close_display(dev_priv);
 
@@ -1311,7 +1337,9 @@ bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv,
 				uint32_t pitch,
 				uint32_t height)
 {
-	return ((u64) pitch * (u64) height) < (u64) dev_priv->prim_bb_mem;
+	return ((u64) pitch * (u64) height) < (u64)
+		((dev_priv->active_display_unit == vmw_du_screen_target) ?
+		 dev_priv->prim_bb_mem : dev_priv->vram_size);
 }
 
 
@@ -1558,6 +1586,11 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector,
 	if (dev_priv->active_display_unit == vmw_du_screen_object)
 		assumed_bpp = 4;
 
+	if (dev_priv->active_display_unit == vmw_du_screen_target) {
+		max_width  = min(max_width,  dev_priv->stdu_max_width);
+		max_height = min(max_height, dev_priv->stdu_max_height);
+	}
+
 	/* Add preferred mode */
 	mode = drm_mode_duplicate(dev, &prefmode);
 	if (!mode)
@@ -1674,6 +1707,19 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
 			bounding_box.h = rects[i].y + rects[i].h;
 	}
 
+	/*
+	 * For Screen Target Display Unit, all the displays must fit
+	 * inside of maximum texture size.
+	 */
+	if (dev_priv->active_display_unit == vmw_du_screen_target)
+		if (bounding_box.w > dev_priv->texture_max_width ||
+		    bounding_box.h > dev_priv->texture_max_height) {
+			DRM_ERROR("Layout exceeds maximum texture size\n");
+			ret = -EINVAL;
+			goto out_free;
+		}
+
+
 	vmw_du_update_layout(dev_priv, arg->num_outputs, rects);
 
 out_free:

drivers/gpu/drm/vmwgfx/vmwgfx_kms.h

@@ -204,4 +204,24 @@ int vmw_kms_sou_do_dmabuf_dirty(struct drm_file *file_priv,
 				struct drm_clip_rect *clips,
 				unsigned num_clips, int increment,
 				struct vmw_fence_obj **out_fence);
+
+
+/*
+ * Screen Target Display Unit functions - vmwgfx_stdu.c
+ */
+int vmw_kms_stdu_init_display(struct vmw_private *dev_priv);
+int vmw_kms_stdu_close_display(struct vmw_private *dev_priv);
+int vmw_kms_stdu_do_surface_dirty(struct vmw_private *dev_priv,
+				  struct drm_file *file_priv,
+				  struct vmw_framebuffer *framebuffer,
+				  struct drm_clip_rect *clips,
+				  unsigned num_clips, int increment);
+int vmw_kms_stdu_present(struct vmw_private *dev_priv,
+			 struct drm_file *file_priv,
+			 struct vmw_framebuffer *vfb,
+			 uint32_t user_handle,
+			 int32_t dest_x, int32_t dest_y,
+			 struct drm_vmw_rect *clips,
+			 uint32_t num_clips);
+
 #endif

drivers/gpu/drm/vmwgfx/vmwgfx_mob.c

@@ -31,7 +31,8 @@
  * If we set up the screen target otable, screen objects stop working.
  */
 
-#define VMW_OTABLE_SETUP_SUB ((VMWGFX_ENABLE_SCREEN_TARGET_OTABLE) ? 0 : 1)
+#define VMW_OTABLE_SETUP_SUB ((VMWGFX_ENABLE_SCREEN_TARGET_OTABLE &&	\
+			       (dev_priv->capabilities & SVGA_CAP_3D)) ? 0 : 1)
 
 #ifdef CONFIG_64BIT
 #define VMW_PPN_SIZE 8

drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c

+/******************************************************************************
+ *
+ * Copyright © 2014 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ ******************************************************************************/
+
+#include "vmwgfx_kms.h"
+#include "svga3d_surfacedefs.h"
+#include <drm/drm_plane_helper.h>
+
+#define vmw_crtc_to_stdu(x) \
+	container_of(x, struct vmw_screen_target_display_unit, base.crtc)
+#define vmw_encoder_to_stdu(x) \
+	container_of(x, struct vmw_screen_target_display_unit, base.encoder)
+#define vmw_connector_to_stdu(x) \
+	container_of(x, struct vmw_screen_target_display_unit, base.connector)
+
+
+
+enum stdu_content_type {
+	SAME_AS_DISPLAY = 0,
+	SEPARATE_SURFACE,
+	SEPARATE_DMA
+};
+
+
+
+/**
+ * struct vmw_screen_target_display_unit
+ *
+ * @base: VMW specific DU structure
+ * @display_srf: surface to be displayed.  The dimension of this will always
+ *               match the display mode.  If the display mode matches
+ *               content_vfbs dimensions, then this is a pointer into the
+ *               corresponding field in content_vfbs.  If not, then this
+ *               is a separate buffer to which content_vfbs will blit to.
+ * @content_fb: holds the rendered content, can be a surface or DMA buffer
+ * @content_type:  content_fb type
+ * @defined:  true if the current display unit has been initialized
+ */
+struct vmw_screen_target_display_unit {
+	struct vmw_display_unit base;
+
+	struct vmw_surface     *display_srf;
+	struct drm_framebuffer *content_fb;
+
+	enum stdu_content_type content_fb_type;
+
+	bool defined;
+};
+
+
+
+static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu);
+
+
+
+/******************************************************************************
+ * Screen Target Display Unit helper Functions
+ *****************************************************************************/
+
+/**
+ * vmw_stdu_pin_display - pins the resource associated with the display surface
+ *
+ * @stdu: contains the display surface
+ *
+ * Since the display surface can either be a private surface allocated by us,
+ * or it can point to the content surface, we use this function to not pin the
+ * same resource twice.
+ */
+static int vmw_stdu_pin_display(struct vmw_screen_target_display_unit *stdu)
+{
+	return vmw_resource_pin(&stdu->display_srf->res);
+}
+
+
+
+/**
+ * vmw_stdu_unpin_display - unpins the resource associated with display surface
+ *
+ * @stdu: contains the display surface
+ *
+ * If the display surface was privatedly allocated by
+ * vmw_surface_gb_priv_define() and not registered as a framebuffer, then it
+ * won't be automatically cleaned up when all the framebuffers are freed.  As
+ * such, we have to explicitly call vmw_resource_unreference() to get it freed.
+ */
+static void vmw_stdu_unpin_display(struct vmw_screen_target_display_unit *stdu)
+{
+	if (stdu->display_srf) {
+		struct vmw_resource *res = &stdu->display_srf->res;
+
+		vmw_resource_unpin(res);
+
+		if (stdu->content_fb_type != SAME_AS_DISPLAY) {
+			vmw_resource_unreference(&res);
+			stdu->content_fb_type = SAME_AS_DISPLAY;
+		}
+
+		stdu->display_srf = NULL;
+	}
+}
+
+
+
+/******************************************************************************
+ * Screen Target Display Unit CRTC Functions
+ *****************************************************************************/
+
+
+/**
+ * vmw_stdu_crtc_destroy - cleans up the STDU
+ *
+ * @crtc: used to get a reference to the containing STDU
+ */
+static void vmw_stdu_crtc_destroy(struct drm_crtc *crtc)
+{
+	vmw_stdu_destroy(vmw_crtc_to_stdu(crtc));
+}
+
+
+
+/**
+ * vmw_stdu_content_copy - copies an area from the content to display surface
+ *
+ * @dev_priv:  VMW DRM device
+ * @file_priv: Pointer to a drm file private structure
+ * @stdu: STDU whose display surface will be blitted to
+ * @content_x: top/left corner of the content area to blit from
+ * @content_y: top/left corner of the content area to blit from
+ * @width: width of the blit area
+ * @height: height of the blit area
+ * @display_x: top/left corner of the display area to blit to
+ * @display_y: top/left corner of the display area to blit to
+ *
+ * Copies an area from the content surface to the display surface.
+ *
+ * RETURNs:
+ * 0 on success, error code on failure
+ */
+static int vmw_stdu_content_copy(struct vmw_private *dev_priv,
+				 struct drm_file *file_priv,
+				 struct vmw_screen_target_display_unit *stdu,
+				 uint32_t content_x, uint32_t content_y,
+				 uint32_t width, uint32_t height,
+				 uint32_t display_x, uint32_t display_y)
+{
+	size_t fifo_size;
+	int ret;
+	void *cmd;
+
+	struct vmw_surface_dma {
+		SVGA3dCmdHeader     header;
+		SVGA3dCmdSurfaceDMA body;
+		SVGA3dCopyBox       area;
+		SVGA3dCmdSurfaceDMASuffix suffix;
+	} surface_dma_cmd;
+
+	struct {
+		SVGA3dCmdHeader      header;
+		SVGA3dCmdSurfaceCopy body;
+		SVGA3dCopyBox        area;
+	} surface_cpy_cmd;
+
+
+	/*
+	 * Can only copy if content and display surfaces exist and are not
+	 * the same surface
+	 */
+	if (stdu->display_srf == NULL || stdu->content_fb == NULL ||
+	    stdu->content_fb_type == SAME_AS_DISPLAY) {
+		return -EINVAL;
+	}
+
+	if (stdu->content_fb_type == SEPARATE_DMA) {
+		struct vmw_framebuffer *content_vfb;
+		struct vmw_framebuffer_dmabuf *content_vfbd;
+		struct vmw_framebuffer_surface *content_vfbs;
+		struct drm_vmw_size cur_size = {0};
+		const struct svga3d_surface_desc *desc;
+		SVGA3dCmdSurfaceDMASuffix *suffix;
+		SVGAGuestPtr ptr;
+
+		content_vfb  = vmw_framebuffer_to_vfb(stdu->content_fb);
+		content_vfbd = vmw_framebuffer_to_vfbd(stdu->content_fb);
+		content_vfbs = vmw_framebuffer_to_vfbs(stdu->content_fb);
+
+		cur_size.width  = width;
+		cur_size.height = height;
+		cur_size.depth  = 1;
+
+		desc = svga3dsurface_get_desc(content_vfbs->surface->format);
+
+
+		fifo_size = sizeof(surface_dma_cmd);
+
+		memset(&surface_dma_cmd, 0, fifo_size);
+
+		ptr.gmrId  = content_vfb->user_handle;
+		ptr.offset = 0;
+
+		surface_dma_cmd.header.id   = SVGA_3D_CMD_SURFACE_DMA;
+		surface_dma_cmd.header.size = sizeof(surface_dma_cmd.body) +
+					      sizeof(surface_dma_cmd.area) +
+					      sizeof(surface_dma_cmd.suffix);
+
+		surface_dma_cmd.body.guest.ptr   = ptr;
+		surface_dma_cmd.body.guest.pitch = stdu->content_fb->pitches[0];
+		surface_dma_cmd.body.host.sid    = stdu->display_srf->res.id;
+		surface_dma_cmd.body.host.face   = 0;
+		surface_dma_cmd.body.host.mipmap = 0;
+		surface_dma_cmd.body.transfer    = SVGA3D_WRITE_HOST_VRAM;
+
+		surface_dma_cmd.area.srcx = content_x;
+		surface_dma_cmd.area.srcy = content_y;
+		surface_dma_cmd.area.x    = display_x;
+		surface_dma_cmd.area.y    = display_y;
+		surface_dma_cmd.area.d    = 1;
+		surface_dma_cmd.area.w    = width;
+		surface_dma_cmd.area.h    = height;
+
+		suffix = &surface_dma_cmd.suffix;
+
+		suffix->suffixSize    = sizeof(*suffix);
+		suffix->maximumOffset = svga3dsurface_get_image_buffer_size(
+						desc,
+						&cur_size,
+						stdu->content_fb->pitches[0]);
+
+		cmd = (void *) &surface_dma_cmd;
+	} else {
+		struct vmw_framebuffer *content_vfb;
+
+		content_vfb = vmw_framebuffer_to_vfb(stdu->content_fb);
+
+		fifo_size = sizeof(surface_cpy_cmd);
+
+		memset(&surface_cpy_cmd, 0, sizeof(surface_cpy_cmd));
+
+		surface_cpy_cmd.header.id   = SVGA_3D_CMD_SURFACE_COPY;
+		surface_cpy_cmd.header.size = sizeof(surface_cpy_cmd.body) +
+					      sizeof(surface_cpy_cmd.area);
+
+		surface_cpy_cmd.body.src.sid  = content_vfb->user_handle;
+		surface_cpy_cmd.body.dest.sid = stdu->display_srf->res.id;
+
+		surface_cpy_cmd.area.srcx = content_x;
+		surface_cpy_cmd.area.srcy = content_y;
+		surface_cpy_cmd.area.x    = display_x;
+		surface_cpy_cmd.area.y    = display_y;
+		surface_cpy_cmd.area.d    = 1;
+		surface_cpy_cmd.area.w    = width;
+		surface_cpy_cmd.area.h    = height;
+
+		cmd = (void *) &surface_cpy_cmd;
+	}
+
+	ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
+				  fifo_size, 0, VMW_QUIRK_SCREENTARGET,
+				  NULL, NULL);
+
+	return ret;
+}
+
+
+
+/**
+ * vmw_stdu_define_st - Defines a Screen Target
+ *
+ * @dev_priv:  VMW DRM device
+ * @stdu: display unit to create a Screen Target for
+ *
+ * Creates a STDU that we can used later.  This function is called whenever the
+ * framebuffer size changes.
+ *
+ * RETURNs:
+ * 0 on success, error code on failure
+ */
+static int vmw_stdu_define_st(struct vmw_private *dev_priv,
+			      struct vmw_screen_target_display_unit *stdu)
+{
+	struct {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdDefineGBScreenTarget body;
+	} *cmd;
+
+	cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
+
+	if (unlikely(cmd == NULL)) {
+		DRM_ERROR("Out of FIFO space defining Screen Target\n");
+		return -ENOMEM;
+	}
+
+	cmd->header.id   = SVGA_3D_CMD_DEFINE_GB_SCREENTARGET;
+	cmd->header.size = sizeof(cmd->body);
+
+	cmd->body.stid   = stdu->base.unit;
+	cmd->body.width  = stdu->display_srf->base_size.width;
+	cmd->body.height = stdu->display_srf->base_size.height;
+	cmd->body.flags  = (0 == cmd->body.stid) ? SVGA_STFLAG_PRIMARY : 0;
+	cmd->body.dpi    = 0;
+	cmd->body.xRoot  = stdu->base.crtc.x;
+	cmd->body.yRoot  = stdu->base.crtc.y;
+
+	if (!stdu->base.is_implicit) {
+		cmd->body.xRoot  = stdu->base.gui_x;
+		cmd->body.yRoot  = stdu->base.gui_y;
+	}
+
+	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+
+	stdu->defined = true;
+
+	return 0;
+}
+
+
+
+/**
+ * vmw_stdu_bind_st - Binds a surface to a Screen Target
+ *
+ * @dev_priv: VMW DRM device
+ * @stdu: display unit affected
+ * @res: Buffer to bind to the screen target.  Set to NULL to blank screen.
+ *
+ * Binding a surface to a Screen Target the same as flipping
+ */
+static int vmw_stdu_bind_st(struct vmw_private *dev_priv,
+			    struct vmw_screen_target_display_unit *stdu,
+			    struct vmw_resource *res)
+{
+	SVGA3dSurfaceImageId image;
+
+	struct {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdBindGBScreenTarget body;
+	} *cmd;
+
+
+	if (!stdu->defined) {
+		DRM_ERROR("No screen target defined\n");
+		return -EINVAL;
+	}
+
+	/* Set up image using information in vfb */
+	memset(&image, 0, sizeof(image));
+	image.sid = res ? res->id : SVGA3D_INVALID_ID;
+
+	cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
+
+	if (unlikely(cmd == NULL)) {
+		DRM_ERROR("Out of FIFO space binding a screen target\n");
+		return -ENOMEM;
+	}
+
+	cmd->header.id   = SVGA_3D_CMD_BIND_GB_SCREENTARGET;
+	cmd->header.size = sizeof(cmd->body);
+
+	cmd->body.stid   = stdu->base.unit;
+	cmd->body.image  = image;
+
+	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+
+	return 0;
+}
+
+
+
+/**
+ * vmw_stdu_update_st - Updates a Screen Target
+ *
+ * @dev_priv: VMW DRM device
+ * @file_priv: Pointer to a drm file private structure
+ * @stdu: display unit affected
+ * @update_area: area that needs to be updated
+ *
+ * This function needs to be called whenever the content of a screen
+ * target changes.
+ * If the display and content buffers are different, then this function does
+ * a blit first from the content buffer to the display buffer before issuing
+ * the Screen Target update command.
+ *
+ * RETURNS:
+ * 0 on success, error code on failure
+ */
+static int vmw_stdu_update_st(struct vmw_private *dev_priv,
+			      struct drm_file *file_priv,
+			      struct vmw_screen_target_display_unit *stdu,
+			      struct drm_clip_rect *update_area)
+{
+	u32 width, height;
+	u32 display_update_x, display_update_y;
+	unsigned short display_x1, display_y1, display_x2, display_y2;
+
+	struct {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdUpdateGBScreenTarget body;
+	} *cmd;
+
+
+	if (!stdu->defined) {
+		DRM_ERROR("No screen target defined");
+		return -EINVAL;
+	}
+
+	/* Display coordinates relative to its position in content surface */
+	display_x1 = stdu->base.crtc.x;
+	display_y1 = stdu->base.crtc.y;
+	display_x2 = display_x1 + stdu->display_srf->base_size.width;
+	display_y2 = display_y1 + stdu->display_srf->base_size.height;
+
+	/* Do nothing if the update area is outside of the display surface */
+	if (update_area->x2 <= display_x1 || update_area->x1 >= display_x2 ||
+	    update_area->y2 <= display_y1 || update_area->y1 >= display_y2)
+		return 0;
+
+	/* The top-left hand corner of the update area in display surface */
+	display_update_x = max(update_area->x1 - display_x1, 0);
+	display_update_y = max(update_area->y1 - display_y1, 0);
+
+	width  = min(update_area->x2, display_x2) -
+		 max(update_area->x1, display_x1);
+	height = min(update_area->y2, display_y2) -
+		 max(update_area->y1, display_y1);
+
+	if (file_priv && stdu->content_fb_type != SAME_AS_DISPLAY) {
+		int ret;
+
+		ret = vmw_stdu_content_copy(dev_priv, file_priv,
+					    stdu,
+					    max(update_area->x1, display_x1),
+					    max(update_area->y1, display_y1),
+					    width, height,
+					    display_update_x, display_update_y);
+		if (unlikely(ret != 0)) {
+			DRM_ERROR("Failed to blit content\n");
+			return ret;
+		}
+	}
+
+	cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
+
+	if (unlikely(cmd == NULL)) {
+		DRM_ERROR("Out of FIFO space updating a Screen Target\n");
+		return -ENOMEM;
+	}
+
+	cmd->header.id   = SVGA_3D_CMD_UPDATE_GB_SCREENTARGET;
+	cmd->header.size = sizeof(cmd->body);
+
+	cmd->body.stid   = stdu->base.unit;
+	cmd->body.rect.x = display_update_x;
+	cmd->body.rect.y = display_update_y;
+	cmd->body.rect.w = width;
+	cmd->body.rect.h = height;
+
+	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+
+	return 0;
+}
+
+
+
+/**
+ * vmw_stdu_destroy_st - Destroy a Screen Target
+ *
+ * @dev_priv:  VMW DRM device
+ * @stdu: display unit to destroy
+ */
+static int vmw_stdu_destroy_st(struct vmw_private *dev_priv,
+			       struct vmw_screen_target_display_unit *stdu)
+{
+	int    ret;
+
+	struct {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdDestroyGBScreenTarget body;
+	} *cmd;
+
+
+	/* Nothing to do if not successfully defined */
+	if (unlikely(!stdu->defined))
+		return 0;
+
+	cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
+
+	if (unlikely(cmd == NULL)) {
+		DRM_ERROR("Out of FIFO space, screen target not destroyed\n");
+		return -ENOMEM;
+	}
+
+	cmd->header.id   = SVGA_3D_CMD_DESTROY_GB_SCREENTARGET;
+	cmd->header.size = sizeof(cmd->body);
+
+	cmd->body.stid   = stdu->base.unit;
+
+	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+
+	/* Force sync */
+	ret = vmw_fallback_wait(dev_priv, false, true, 0, false, 3*HZ);
+	if (unlikely(ret != 0))
+		DRM_ERROR("Failed to sync with HW");
+
+	stdu->defined = false;
+
+	return ret;
+}
+
+
+
+/**
+ * vmw_stdu_crtc_set_config - Sets a mode
+ *
+ * @set:  mode parameters
+ *
+ * This function is the device-specific portion of the DRM CRTC mode set.
+ * For the SVGA device, we do this by defining a Screen Target, binding a
+ * GB Surface to that target, and finally update the screen target.
+ *
+ * RETURNS:
+ * 0 on success, error code otherwise
+ */
+static int vmw_stdu_crtc_set_config(struct drm_mode_set *set)
+{
+	struct vmw_private *dev_priv;
+	struct vmw_screen_target_display_unit *stdu;
+	struct vmw_framebuffer *vfb;
+	struct vmw_framebuffer_surface *new_vfbs;
+	struct drm_display_mode *mode;
+	struct drm_framebuffer  *new_fb;
+	struct drm_crtc      *crtc;
+	struct drm_encoder   *encoder;
+	struct drm_connector *connector;
+	struct drm_clip_rect update_area = {0};
+	int    ret;
+
+
+	if (!set || !set->crtc)
+		return -EINVAL;
+
+	crtc     = set->crtc;
+	crtc->x  = set->x;
+	crtc->y  = set->y;
+	stdu     = vmw_crtc_to_stdu(crtc);
+	mode     = set->mode;
+	new_fb   = set->fb;
+	dev_priv = vmw_priv(crtc->dev);
+
+
+	if (set->num_connectors > 1) {
+		DRM_ERROR("Too many connectors\n");
+		return -EINVAL;
+	}
+
+	if (set->num_connectors == 1 &&
+	    set->connectors[0] != &stdu->base.connector) {
+		DRM_ERROR("Connectors don't match %p %p\n",
+			set->connectors[0], &stdu->base.connector);
+		return -EINVAL;
+	}
+
+
+	/* Since they always map one to one these are safe */
+	connector = &stdu->base.connector;
+	encoder   = &stdu->base.encoder;
+
+
+	/*
+	 * After this point the CRTC will be considered off unless a new fb
+	 * is bound
+	 */
+	if (stdu->defined) {
+		/* Unbind current surface by binding an invalid one */
+		ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
+		if (unlikely(ret != 0))
+			return ret;
+
+		/* Update Screen Target, display will now be blank */
+		if (crtc->primary->fb) {
+			update_area.x2 = crtc->primary->fb->width;
+			update_area.y2 = crtc->primary->fb->height;
+
+			ret = vmw_stdu_update_st(dev_priv, NULL,
+						 stdu,
+						 &update_area);
+			if (unlikely(ret != 0))
+				return ret;
+		}
+
+		crtc->primary->fb  = NULL;
+		crtc->enabled      = false;
+		encoder->crtc      = NULL;
+		connector->encoder = NULL;
+
+		vmw_stdu_unpin_display(stdu);
+		stdu->content_fb      = NULL;
+		stdu->content_fb_type = SAME_AS_DISPLAY;
+
+		ret = vmw_stdu_destroy_st(dev_priv, stdu);
+		/* The hardware is hung, give up */
+		if (unlikely(ret != 0))
+			return ret;
+	}
+
+
+	/* Any of these conditions means the caller wants CRTC off */
+	if (set->num_connectors == 0 || !mode || !new_fb)
+		return 0;
+
+
+	if (set->x + mode->hdisplay > new_fb->width ||
+	    set->y + mode->vdisplay > new_fb->height) {
+		DRM_ERROR("Set outside of framebuffer\n");
+		return -EINVAL;
+	}
+
+	stdu->content_fb = new_fb;
+	vfb = vmw_framebuffer_to_vfb(stdu->content_fb);
+
+	if (vfb->dmabuf)
+		stdu->content_fb_type = SEPARATE_DMA;
+
+	/*
+	 * If the requested mode is different than the width and height
+	 * of the FB or if the content buffer is a DMA buf, then allocate
+	 * a display FB that matches the dimension of the mode
+	 */
+	if (mode->hdisplay != new_fb->width  ||
+	    mode->vdisplay != new_fb->height ||
+	    stdu->content_fb_type != SAME_AS_DISPLAY) {
+		struct vmw_surface content_srf;
+		struct drm_vmw_size display_base_size = {0};
+		struct vmw_surface *display_srf;
+
+
+		display_base_size.width  = mode->hdisplay;
+		display_base_size.height = mode->vdisplay;
+		display_base_size.depth  = 1;
+
+		/*
+		 * If content buffer is a DMA buf, then we have to construct
+		 * surface info
+		 */
+		if (stdu->content_fb_type == SEPARATE_DMA) {
+
+			switch (new_fb->bits_per_pixel) {
+			case 32:
+				content_srf.format = SVGA3D_X8R8G8B8;
+				break;
+
+			case 16:
+				content_srf.format = SVGA3D_R5G6B5;
+				break;
+
+			case 8:
+				content_srf.format = SVGA3D_P8;
+				break;
+
+			default:
+				DRM_ERROR("Invalid format\n");
+				ret = -EINVAL;
+				goto err_unref_content;
+			}
+
+			content_srf.flags             = 0;
+			content_srf.mip_levels[0]     = 1;
+			content_srf.multisample_count = 0;
+		} else {
+
+			stdu->content_fb_type = SEPARATE_SURFACE;
+
+			new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
+			content_srf = *new_vfbs->surface;
+		}
+
+
+		ret = vmw_surface_gb_priv_define(crtc->dev,
+				0, /* because kernel visible only */
+				content_srf.flags,
+				content_srf.format,
+				true, /* a scanout buffer */
+				content_srf.mip_levels[0],
+				content_srf.multisample_count,
+				display_base_size,
+				&display_srf);
+		if (unlikely(ret != 0)) {
+			DRM_ERROR("Cannot allocate a display FB.\n");
+			goto err_unref_content;
+		}
+
+		stdu->display_srf = display_srf;
+	} else {
+		new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
+		stdu->display_srf = new_vfbs->surface;
+	}
+
+
+	ret = vmw_stdu_pin_display(stdu);
+	if (unlikely(ret != 0)) {
+		stdu->display_srf = NULL;
+		goto err_unref_content;
+	}
+
+	vmw_fb_off(dev_priv);
+	vmw_svga_enable(dev_priv);
+
+	/*
+	 * Steps to displaying a surface, assume surface is already
+	 * bound:
+	 *   1.  define a screen target
+	 *   2.  bind a fb to the screen target
+	 *   3.  update that screen target (this is done later by
+	 *       vmw_kms_stdu_do_surface_dirty_or_present)
+	 */
+	ret = vmw_stdu_define_st(dev_priv, stdu);
+	if (unlikely(ret != 0))
+		goto err_unpin_display_and_content;
+
+	ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res);
+	if (unlikely(ret != 0))
+		goto err_unpin_destroy_st;
+
+
+	connector->encoder = encoder;
+	encoder->crtc      = crtc;
+
+	crtc->mode    = *mode;
+	crtc->primary->fb = new_fb;
+	crtc->enabled = true;
+
+	return ret;
+
+err_unpin_destroy_st:
+	vmw_stdu_destroy_st(dev_priv, stdu);
+err_unpin_display_and_content:
+	vmw_stdu_unpin_display(stdu);
+err_unref_content:
+	stdu->content_fb = NULL;
+	return ret;
+}
+
+
+
+/**
+ * vmw_stdu_crtc_page_flip - Binds a buffer to a screen target
+ *
+ * @crtc: CRTC to attach FB to
+ * @fb: FB to attach
+ * @event: Event to be posted. This event should've been alloced
+ *         using k[mz]alloc, and should've been completely initialized.
+ * @page_flip_flags: Input flags.
+ *
+ * If the STDU uses the same display and content buffers, i.e. a true flip,
+ * this function will replace the existing display buffer with the new content
+ * buffer.
+ *
+ * If the STDU uses different display and content buffers, i.e. a blit, then
+ * only the content buffer will be updated.
+ *
+ * RETURNS:
+ * 0 on success, error code on failure
+ */
+static int vmw_stdu_crtc_page_flip(struct drm_crtc *crtc,
+				   struct drm_framebuffer *new_fb,
+				   struct drm_pending_vblank_event *event,
+				   uint32_t flags)
+
+{
+	struct vmw_private *dev_priv = vmw_priv(crtc->dev);
+	struct vmw_screen_target_display_unit *stdu;
+	struct drm_file *file_priv;
+	struct drm_clip_rect update_area = {0};
+	int ret;
+
+	/*
+	 * Temporarily don't support event == NULL. We need the
+	 * @file_priv pointer!
+	 */
+	if (event == NULL)
+		return -EINVAL;
+
+	if (crtc == NULL)
+		return -EINVAL;
+
+	dev_priv          = vmw_priv(crtc->dev);
+	stdu              = vmw_crtc_to_stdu(crtc);
+	crtc->primary->fb = new_fb;
+	stdu->content_fb  = new_fb;
+
+	if (stdu->display_srf) {
+		update_area.x2 = stdu->display_srf->base_size.width;
+		update_area.y2 = stdu->display_srf->base_size.height;
+
+		/*
+		 * If the display surface is the same as the content surface
+		 * then remove the reference
+		 */
+		if (stdu->content_fb_type == SAME_AS_DISPLAY) {
+			if (stdu->defined) {
+				/* Unbind the current surface */
+				ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
+				if (unlikely(ret != 0))
+					goto err_out;
+			}
+			vmw_stdu_unpin_display(stdu);
+			stdu->display_srf = NULL;
+		}
+	}
+
+
+	if (!new_fb) {
+		/* Blanks the display */
+		(void) vmw_stdu_update_st(dev_priv, NULL, stdu, &update_area);
+
+		return 0;
+	}
+
+
+	if (stdu->content_fb_type == SAME_AS_DISPLAY) {
+		stdu->display_srf = vmw_framebuffer_to_vfbs(new_fb)->surface;
+		ret = vmw_stdu_pin_display(stdu);
+		if (ret) {
+			stdu->display_srf = NULL;
+			goto err_out;
+		}
+
+		/* Bind display surface */
+		ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res);
+		if (unlikely(ret != 0))
+			goto err_unpin_display_and_content;
+	}
+
+	/* Update display surface: after this point everything is bound */
+	update_area.x2 = stdu->display_srf->base_size.width;
+	update_area.y2 = stdu->display_srf->base_size.height;
+
+	file_priv = event->base.file_priv;
+	ret = vmw_stdu_update_st(dev_priv, file_priv, stdu, &update_area);
+	if (unlikely(ret != 0))
+		return ret;
+
+	if (event) {
+		struct vmw_fence_obj *fence = NULL;
+
+		vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL);
+		if (!fence)
+			return -ENOMEM;
+
+		ret = vmw_event_fence_action_queue(file_priv, fence,
+						   &event->base,
+						   &event->event.tv_sec,
+						   &event->event.tv_usec,
+						   true);
+		vmw_fence_obj_unreference(&fence);
+	}
+
+	return ret;
+
+err_unpin_display_and_content:
+	vmw_stdu_unpin_display(stdu);
+err_out:
+	crtc->primary->fb = NULL;
+	stdu->content_fb = NULL;
+	return ret;
+}
+
+
+
+/*
+ *  Screen Target CRTC dispatch table
+ */
+static struct drm_crtc_funcs vmw_stdu_crtc_funcs = {
+	.save = vmw_du_crtc_save,
+	.restore = vmw_du_crtc_restore,
+	.cursor_set = vmw_du_crtc_cursor_set,
+	.cursor_move = vmw_du_crtc_cursor_move,
+	.gamma_set = vmw_du_crtc_gamma_set,
+	.destroy = vmw_stdu_crtc_destroy,
+	.set_config = vmw_stdu_crtc_set_config,
+	.page_flip = vmw_stdu_crtc_page_flip,
+};
+
+
+
+/******************************************************************************
+ * Screen Target Display Unit Encoder Functions
+ *****************************************************************************/
+
+/**
+ * vmw_stdu_encoder_destroy - cleans up the STDU
+ *
+ * @encoder: used the get the containing STDU
+ *
+ * vmwgfx cleans up crtc/encoder/connector all at the same time so technically
+ * this can be a no-op.  Nevertheless, it doesn't hurt of have this in case
+ * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
+ * get called.
+ */
+static void vmw_stdu_encoder_destroy(struct drm_encoder *encoder)
+{
+	vmw_stdu_destroy(vmw_encoder_to_stdu(encoder));
+}
+
+static struct drm_encoder_funcs vmw_stdu_encoder_funcs = {
+	.destroy = vmw_stdu_encoder_destroy,
+};
+
+
+
+/******************************************************************************
+ * Screen Target Display Unit Connector Functions
+ *****************************************************************************/
+
+/**
+ * vmw_stdu_connector_destroy - cleans up the STDU
+ *
+ * @connector: used to get the containing STDU
+ *
+ * vmwgfx cleans up crtc/encoder/connector all at the same time so technically
+ * this can be a no-op.  Nevertheless, it doesn't hurt of have this in case
+ * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
+ * get called.
+ */
+static void vmw_stdu_connector_destroy(struct drm_connector *connector)
+{
+	vmw_stdu_destroy(vmw_connector_to_stdu(connector));
+}
+
+
+
+static struct drm_connector_funcs vmw_stdu_connector_funcs = {
+	.dpms = vmw_du_connector_dpms,
+	.save = vmw_du_connector_save,
+	.restore = vmw_du_connector_restore,
+	.detect = vmw_du_connector_detect,
+	.fill_modes = vmw_du_connector_fill_modes,
+	.set_property = vmw_du_connector_set_property,
+	.destroy = vmw_stdu_connector_destroy,
+};
+
+
+
+/**
+ * vmw_stdu_init - Sets up a Screen Target Display Unit
+ *
+ * @dev_priv: VMW DRM device
+ * @unit: unit number range from 0 to VMWGFX_NUM_DISPLAY_UNITS
+ *
+ * This function is called once per CRTC, and allocates one Screen Target
+ * display unit to represent that CRTC.  Since the SVGA device does not separate
+ * out encoder and connector, they are represented as part of the STDU as well.
+ */
+static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
+{
+	struct vmw_screen_target_display_unit *stdu;
+	struct drm_device *dev = dev_priv->dev;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_crtc *crtc;
+
+
+	stdu = kzalloc(sizeof(*stdu), GFP_KERNEL);
+	if (!stdu)
+		return -ENOMEM;
+
+	stdu->base.unit = unit;
+	crtc = &stdu->base.crtc;
+	encoder = &stdu->base.encoder;
+	connector = &stdu->base.connector;
+
+	stdu->base.pref_active = (unit == 0);
+	stdu->base.pref_width  = dev_priv->initial_width;
+	stdu->base.pref_height = dev_priv->initial_height;
+	stdu->base.pref_mode   = NULL;
+	stdu->base.is_implicit = true;
+
+	drm_connector_init(dev, connector, &vmw_stdu_connector_funcs,
+			   DRM_MODE_CONNECTOR_VIRTUAL);
+	connector->status = vmw_du_connector_detect(connector, false);
+
+	drm_encoder_init(dev, encoder, &vmw_stdu_encoder_funcs,
+			 DRM_MODE_ENCODER_VIRTUAL);
+	drm_mode_connector_attach_encoder(connector, encoder);
+	encoder->possible_crtcs = (1 << unit);
+	encoder->possible_clones = 0;
+
+	(void) drm_connector_register(connector);
+
+	drm_crtc_init(dev, crtc, &vmw_stdu_crtc_funcs);
+
+	drm_mode_crtc_set_gamma_size(crtc, 256);
+
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.dirty_info_property,
+				   1);
+
+	return 0;
+}
+
+
+
+/**
+ *  vmw_stdu_destroy - Cleans up a vmw_screen_target_display_unit
+ *
+ *  @stdu:  Screen Target Display Unit to be destroyed
+ *
+ *  Clean up after vmw_stdu_init
+ */
+static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu)
+{
+	vmw_stdu_unpin_display(stdu);
+
+	vmw_du_cleanup(&stdu->base);
+	kfree(stdu);
+}
+
+
+
+/******************************************************************************
+ * Screen Target Display KMS Functions
+ *
+ * These functions are called by the common KMS code in vmwgfx_kms.c
+ *****************************************************************************/
+
+/**
+ * vmw_kms_stdu_init_display - Initializes a Screen Target based display
+ *
+ * @dev_priv: VMW DRM device
+ *
+ * This function initialize a Screen Target based display device.  It checks
+ * the capability bits to make sure the underlying hardware can support
+ * screen targets, and then creates the maximum number of CRTCs, a.k.a Display
+ * Units, as supported by the display hardware.
+ *
+ * RETURNS:
+ * 0 on success, error code otherwise
+ */
+int vmw_kms_stdu_init_display(struct vmw_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	int i, ret;
+
+
+	/* Do nothing if Screen Target support is turned off */
+	if (!VMWGFX_ENABLE_SCREEN_TARGET_OTABLE)
+		return -ENOSYS;
+
+	if (!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS) ||
+	    !(dev_priv->capabilities & SVGA_CAP_3D))
+		return -ENOSYS;
+
+	ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
+	if (unlikely(ret != 0))
+		return ret;
+
+	ret = drm_mode_create_dirty_info_property(dev);
+	if (unlikely(ret != 0))
+		goto err_vblank_cleanup;
+
+	for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i) {
+		ret = vmw_stdu_init(dev_priv, i);
+
+		if (unlikely(ret != 0)) {
+			DRM_ERROR("Failed to initialize STDU %d", i);
+			goto err_vblank_cleanup;
+		}
+	}
+
+	dev_priv->active_display_unit = vmw_du_screen_target;
+
+	DRM_INFO("Screen Target Display device initialized\n");
+
+	return 0;
+
+err_vblank_cleanup:
+	drm_vblank_cleanup(dev);
+	return ret;
+}
+
+
+
+/**
+ * vmw_kms_stdu_close_display - Cleans up after vmw_kms_stdu_init_display
+ *
+ * @dev_priv: VMW DRM device
+ *
+ * Frees up any resources allocated by vmw_kms_stdu_init_display
+ *
+ * RETURNS:
+ * 0 on success
+ */
+int vmw_kms_stdu_close_display(struct vmw_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	drm_vblank_cleanup(dev);
+
+	return 0;
+}
+
+
+
+/**
+ * vmw_kms_stdu_do_surface_dirty - updates a dirty rectange to SVGA device
+ *
+ * @dev_priv: VMW DRM device
+ * @file_priv: Pointer to a drm file private structure
+ * @framebuffer: FB with the new content to be copied to SVGA device
+ * @clip_rects: array of dirty rectanges
+ * @num_of_clip_rects: number of rectanges in @clips
+ * @increment: increment to the next dirty rect in @clips
+ *
+ * This function sends an Update command to the SVGA device.  This will notify
+ * the device that a region needs to be copied to the screen.  At this time
+ * we are not coalescing clip rects into one large clip rect because the SVGA
+ * device will do it for us.
+ *
+ * RETURNS:
+ * 0 on success, error code otherwise
+ */
+int vmw_kms_stdu_do_surface_dirty(struct vmw_private *dev_priv,
+				  struct drm_file *file_priv,
+				  struct vmw_framebuffer *framebuffer,
+				  struct drm_clip_rect *clip_rects,
+				  unsigned num_of_clip_rects, int increment)
+{
+	struct vmw_screen_target_display_unit *stdu[VMWGFX_NUM_DISPLAY_UNITS];
+	struct drm_clip_rect *cur_rect;
+	struct drm_crtc *crtc;
+
+	unsigned num_of_du = 0, cur_du, count = 0;
+	int      ret = 0;
+
+
+	BUG_ON(!clip_rects || !num_of_clip_rects);
+
+	/* Figure out all the DU affected by this surface */
+	list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list,
+			    head) {
+		if (crtc->primary->fb != &framebuffer->base)
+			continue;
+
+		stdu[num_of_du++] = vmw_crtc_to_stdu(crtc);
+	}
+
+	for (cur_du = 0; cur_du < num_of_du; cur_du++)
+		for (cur_rect = clip_rects, count = 0;
+		     count < num_of_clip_rects && ret == 0;
+		     cur_rect += increment, count++) {
+			ret = vmw_stdu_update_st(dev_priv, file_priv,
+						 stdu[cur_du],
+						 cur_rect);
+		}
+
+	return ret;
+}
+
+
+
+/**
+ * vmw_kms_stdu_present - present a surface to the display surface
+ *
+ * @dev_priv: VMW DRM device
+ * @file_priv: Pointer to a drm file private structure
+ * @vfb: Used to pick which STDU(s) is affected
+ * @user_handle: user handle for the source surface
+ * @dest_x: top/left corner of the display area to blit to
+ * @dest_y: top/left corner of the display area to blit to
+ * @clip_rects: array of dirty rectanges
+ * @num_of_clip_rects: number of rectanges in @clips
+ *
+ * This function copies a surface onto the display surface, and
+ * updates the screen target.  Strech blit is currently not
+ * supported.
+ *
+ * RETURNS:
+ * 0 on success, error code otherwise
+ */
+int vmw_kms_stdu_present(struct vmw_private *dev_priv,
+			 struct drm_file *file_priv,
+			 struct vmw_framebuffer *vfb,
+			 uint32_t user_handle,
+			 int32_t dest_x, int32_t dest_y,
+			 struct drm_vmw_rect *clip_rects,
+			 uint32_t num_of_clip_rects)
+{
+	struct vmw_screen_target_display_unit *stdu[VMWGFX_NUM_DISPLAY_UNITS];
+	struct drm_clip_rect *update_area;
+	struct drm_crtc *crtc;
+	size_t fifo_size;
+	int num_of_du = 0, cur_du, i;
+	int ret = 0;
+	struct vmw_clip_rect src_bb;
+
+	struct {
+		SVGA3dCmdHeader      header;
+		SVGA3dCmdSurfaceCopy body;
+	} *cmd;
+	SVGA3dCopyBox *blits;
+
+
+	BUG_ON(!clip_rects || !num_of_clip_rects);
+
+	list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) {
+		if (crtc->primary->fb != &vfb->base)
+			continue;
+
+		stdu[num_of_du++] = vmw_crtc_to_stdu(crtc);
+	}
+
+
+	update_area = kcalloc(num_of_clip_rects, sizeof(*update_area),
+			      GFP_KERNEL);
+	if (unlikely(update_area == NULL)) {
+		DRM_ERROR("Temporary clip rect memory alloc failed.\n");
+		return -ENOMEM;
+	}
+
+
+	fifo_size = sizeof(*cmd) + sizeof(SVGA3dCopyBox) * num_of_clip_rects;
+
+	cmd = kmalloc(fifo_size, GFP_KERNEL);
+	if (unlikely(cmd == NULL)) {
+		DRM_ERROR("Failed to allocate memory for surface copy.\n");
+		ret = -ENOMEM;
+		goto out_free_update_area;
+	}
+
+	memset(cmd, 0, fifo_size);
+	cmd->header.id = SVGA_3D_CMD_SURFACE_COPY;
+
+	blits = (SVGA3dCopyBox *)&cmd[1];
+
+
+	/* Figure out the source bounding box */
+	src_bb.x1 = clip_rects->x;
+	src_bb.y1 = clip_rects->y;
+	src_bb.x2 = clip_rects->x + clip_rects->w;
+	src_bb.y2 = clip_rects->y + clip_rects->h;
+
+	for (i = 1; i < num_of_clip_rects; i++) {
+		src_bb.x1 = min_t(int, src_bb.x1, clip_rects[i].x);
+		src_bb.x2 = max_t(int, src_bb.x2,
+				  clip_rects[i].x + (int) clip_rects[i].w);
+		src_bb.y1 = min_t(int, src_bb.y1, clip_rects[i].y);
+		src_bb.y2 = max_t(int, src_bb.y2,
+				  clip_rects[i].y + (int) clip_rects[i].h);
+	}
+
+	for (i = 0; i < num_of_clip_rects; i++) {
+		update_area[i].x1 = clip_rects[i].x - src_bb.x1;
+		update_area[i].x2 = update_area[i].x1 + clip_rects[i].w;
+		update_area[i].y1 = clip_rects[i].y - src_bb.y1;
+		update_area[i].y2 = update_area[i].y1 + clip_rects[i].h;
+	}
+
+
+	for (cur_du = 0; cur_du < num_of_du; cur_du++) {
+		struct vmw_clip_rect dest_bb;
+		int num_of_blits;
+
+		crtc = &stdu[cur_du]->base.crtc;
+
+		dest_bb.x1 = src_bb.x1 + dest_x - crtc->x;
+		dest_bb.y1 = src_bb.y1 + dest_y - crtc->y;
+		dest_bb.x2 = src_bb.x2 + dest_x - crtc->x;
+		dest_bb.y2 = src_bb.y2 + dest_y - crtc->y;
+
+		/* Skip any STDU outside of the destination bounding box */
+		if (dest_bb.x1 >= crtc->mode.hdisplay ||
+		    dest_bb.y1 >= crtc->mode.vdisplay ||
+		    dest_bb.x2 <= 0 || dest_bb.y2 <= 0)
+			continue;
+
+		/* Normalize to top-left of src bounding box in dest coord */
+		dest_bb.x2 = crtc->mode.hdisplay - dest_bb.x1;
+		dest_bb.y2 = crtc->mode.vdisplay - dest_bb.y1;
+		dest_bb.x1 = 0 - dest_bb.x1;
+		dest_bb.y1 = 0 - dest_bb.y1;
+
+		for (i = 0, num_of_blits = 0; i < num_of_clip_rects; i++) {
+			int x1 = max_t(int, dest_bb.x1, (int)update_area[i].x1);
+			int y1 = max_t(int, dest_bb.y1, (int)update_area[i].y1);
+			int x2 = min_t(int, dest_bb.x2, (int)update_area[i].x2);
+			int y2 = min_t(int, dest_bb.y2, (int)update_area[i].y2);
+
+			if (x1 >= x2)
+				continue;
+
+			if (y1 >= y2)
+				continue;
+
+			blits[num_of_blits].srcx =  src_bb.x1  + x1;
+			blits[num_of_blits].srcy =  src_bb.y1  + y1;
+			blits[num_of_blits].x    = -dest_bb.x1 + x1;
+			blits[num_of_blits].y    = -dest_bb.y1 + y1;
+			blits[num_of_blits].d    = 1;
+			blits[num_of_blits].w    = x2 - x1;
+			blits[num_of_blits].h    = y2 - y1;
+			num_of_blits++;
+		}
+
+		if (num_of_blits == 0)
+			continue;
+
+		/* Calculate new command size */
+		fifo_size = sizeof(*cmd) + sizeof(SVGA3dCopyBox) * num_of_blits;
+
+		cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
+
+		cmd->body.src.sid  = user_handle;
+		cmd->body.dest.sid = stdu[cur_du]->display_srf->res.id;
+
+		ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
+					  fifo_size, 0, VMW_QUIRK_SCREENTARGET,
+					  NULL, NULL);
+
+		if (unlikely(ret != 0))
+			break;
+
+		for (i = 0; i < num_of_blits; i++) {
+			struct drm_clip_rect blit_area;
+
+			/*
+			 * Add crtc offset because vmw_stdu_update_st expects
+			 * desktop coordinates
+			 */
+			blit_area.x1 = blits[i].x + crtc->x;
+			blit_area.x2 = blit_area.x1 + blits[i].w;
+			blit_area.y1 = blits[i].y + crtc->y;
+			blit_area.y2 = blit_area.y1 + blits[i].h;
+			(void) vmw_stdu_update_st(dev_priv, NULL, stdu[cur_du],
+						  &blit_area);
+		}
+	}
+
+	kfree(cmd);
+
+out_free_update_area:
+	kfree(update_area);
+
+	return ret;
+}

drivers/gpu/drm/vmwgfx/vmwgfx_surface.c

@@ -1486,6 +1486,10 @@ int vmw_surface_gb_priv_define(struct drm_device *dev,
 					srf->mip_levels[0],
 					srf->flags & SVGA3D_SURFACE_CUBEMAP);
 
+	if (dev_priv->active_display_unit == vmw_du_screen_target &&
+	    for_scanout)
+		srf->flags |= SVGA3D_SURFACE_SCREENTARGET;
+
 	/*
 	 * From this point, the generic resource management functions
 	 * destroy the object on failure.

include/uapi/drm/vmwgfx_drm.h

@@ -88,6 +88,7 @@
 #define DRM_VMW_PARAM_3D_CAPS_SIZE     8
 #define DRM_VMW_PARAM_MAX_MOB_MEMORY   9
 #define DRM_VMW_PARAM_MAX_MOB_SIZE     10
+#define DRM_VMW_PARAM_SCREEN_TARGET    11
 
 /**
  * enum drm_vmw_handle_type - handle type for ref ioctls