Merge branch 'topic/huang-d3cold-v7' into next

* topic/huang-d3cold-v7:
  PCI/PM: add PCIe runtime D3cold support
  PCI: do not call pci_set_power_state with PCI_D3cold
  PCI/PM: add runtime PM support to PCIe port
  ACPI/PM: specify lowest allowed state for device sleep state

arch/x86/pci/mrst.c

@@ -264,7 +264,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
 
 static void __devinit mrst_power_off_unused_dev(struct pci_dev *dev)
 {
-	pci_set_power_state(dev, PCI_D3cold);
+	pci_set_power_state(dev, PCI_D3hot);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);

drivers/acpi/sleep.c

@@ -716,8 +716,9 @@ int acpi_suspend(u32 acpi_state)
  *	@dev: device to examine; its driver model wakeup flags control
  *		whether it should be able to wake up the system
  *	@d_min_p: used to store the upper limit of allowed states range
- *	Return value: preferred power state of the device on success, -ENODEV on
- *		failure (ie. if there's no 'struct acpi_device' for @dev)
+ *	@d_max_in: specify the lowest allowed states
+ *	Return value: preferred power state of the device on success, -ENODEV
+ *	(ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
  *
  *	Find the lowest power (highest number) ACPI device power state that
  *	device @dev can be in while the system is in the sleep state represented
@@ -732,13 +733,15 @@ int acpi_suspend(u32 acpi_state)
  *	via @wake.
  */
 
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
 {
 	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
 	struct acpi_device *adev;
 	char acpi_method[] = "_SxD";
 	unsigned long long d_min, d_max;
 
+	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+		return -EINVAL;
 	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 		printk(KERN_DEBUG "ACPI handle has no context!\n");
 		return -ENODEV;
@@ -746,8 +749,10 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
 
 	acpi_method[2] = '0' + acpi_target_sleep_state;
 	/*
-	 * If the sleep state is S0, we will return D3, but if the device has
-	 * _S0W, we will use the value from _S0W
+	 * If the sleep state is S0, the lowest limit from ACPI is D3,
+	 * but if the device has _S0W, we will use the value from _S0W
+	 * as the lowest limit from ACPI.  Finally, we will constrain
+	 * the lowest limit with the specified one.
 	 */
 	d_min = ACPI_STATE_D0;
 	d_max = ACPI_STATE_D3;
@@ -791,8 +796,17 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
 		}
 	}
 
+	if (d_max_in < d_min)
+		return -EINVAL;
 	if (d_min_p)
 		*d_min_p = d_min;
+	/* constrain d_max with specified lowest limit (max number) */
+	if (d_max > d_max_in) {
+		for (d_max = d_max_in; d_max > d_min; d_max--) {
+			if (adev->power.states[d_max].flags.valid)
+				break;
+		}
+	}
 	return d_max;
 }
 #endif /* CONFIG_PM */

drivers/misc/cb710/core.c

@@ -180,7 +180,7 @@ static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	if (state.event & PM_EVENT_SLEEP)
-		pci_set_power_state(pdev, PCI_D3cold);
+		pci_set_power_state(pdev, PCI_D3hot);
 	return 0;
 }
 

drivers/pci/pci-acpi.c

@@ -48,6 +48,12 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
 	if (event != ACPI_NOTIFY_DEVICE_WAKE || !pci_dev)
 		return;
 
+	if (pci_dev->current_state == PCI_D3cold) {
+		pci_wakeup_event(pci_dev);
+		pm_runtime_resume(&pci_dev->dev);
+		return;
+	}
+
 	if (!pci_dev->pm_cap || !pci_dev->pme_support
 	     || pci_check_pme_status(pci_dev)) {
 		if (pci_dev->pme_poll)
@@ -201,9 +207,13 @@ phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
 
 static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
 {
-	int acpi_state;
+	int acpi_state, d_max;
 
-	acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL);
+	if (pdev->no_d3cold)
+		d_max = ACPI_STATE_D3_HOT;
+	else
+		d_max = ACPI_STATE_D3_COLD;
+	acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL, d_max);
 	if (acpi_state < 0)
 		return PCI_POWER_ERROR;
 
@@ -310,7 +320,13 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
 
 static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
 {
-	if (dev->pme_interrupt)
+	/*
+	 * Per PCI Express Base Specification Revision 2.0 section
+	 * 5.3.3.2 Link Wakeup, platform support is needed for D3cold
+	 * waking up to power on the main link even if there is PME
+	 * support for D3cold
+	 */
+	if (dev->pme_interrupt && !dev->runtime_d3cold)
 		return 0;
 
 	if (!acpi_pm_device_run_wake(&dev->dev, enable))

drivers/pci/pci-driver.c

@@ -1019,10 +1019,13 @@ static int pci_pm_runtime_suspend(struct device *dev)
 	if (!pm || !pm->runtime_suspend)
 		return -ENOSYS;
 
+	pci_dev->no_d3cold = false;
 	error = pm->runtime_suspend(dev);
 	suspend_report_result(pm->runtime_suspend, error);
 	if (error)
 		return error;
+	if (!pci_dev->d3cold_allowed)
+		pci_dev->no_d3cold = true;
 
 	pci_fixup_device(pci_fixup_suspend, pci_dev);
 
@@ -1044,6 +1047,7 @@ static int pci_pm_runtime_suspend(struct device *dev)
 
 static int pci_pm_runtime_resume(struct device *dev)
 {
+	int rc;
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
@@ -1054,7 +1058,11 @@ static int pci_pm_runtime_resume(struct device *dev)
 	__pci_enable_wake(pci_dev, PCI_D0, true, false);
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
-	return pm->runtime_resume(dev);
+	rc = pm->runtime_resume(dev);
+
+	pci_dev->runtime_d3cold = false;
+
+	return rc;
 }
 
 static int pci_pm_runtime_idle(struct device *dev)

drivers/pci/pci-sysfs.c

@@ -28,6 +28,7 @@
 #include <linux/pci-aspm.h>
 #include <linux/slab.h>
 #include <linux/vgaarb.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
 static int sysfs_initialized;	/* = 0 */
@@ -378,6 +379,31 @@ dev_bus_rescan_store(struct device *dev, struct device_attribute *attr,
 
 #endif
 
+#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
+static ssize_t d3cold_allowed_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	pdev->d3cold_allowed = !!val;
+	pm_runtime_resume(dev);
+
+	return count;
+}
+
+static ssize_t d3cold_allowed_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	return sprintf (buf, "%u\n", pdev->d3cold_allowed);
+}
+#endif
+
 struct device_attribute pci_dev_attrs[] = {
 	__ATTR_RO(resource),
 	__ATTR_RO(vendor),
@@ -401,6 +427,9 @@ struct device_attribute pci_dev_attrs[] = {
 #ifdef CONFIG_HOTPLUG
 	__ATTR(remove, (S_IWUSR|S_IWGRP), NULL, remove_store),
 	__ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store),
+#endif
+#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
+	__ATTR(d3cold_allowed, 0644, d3cold_allowed_show, d3cold_allowed_store),
 #endif
 	__ATTR_NULL,
 };

drivers/pci/pci.c

@@ -587,7 +587,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		dev_info(&dev->dev, "Refused to change power state, "
 			"currently in D%d\n", dev->current_state);
 
-	/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+	/*
+	 * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
 	 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
 	 * from D3hot to D0 _may_ perform an internal reset, thereby
 	 * going to "D0 Uninitialized" rather than "D0 Initialized".
@@ -619,6 +620,16 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 	if (dev->pm_cap) {
 		u16 pmcsr;
 
+		/*
+		 * Configuration space is not accessible for device in
+		 * D3cold, so just keep or set D3cold for safety
+		 */
+		if (dev->current_state == PCI_D3cold)
+			return;
+		if (state == PCI_D3cold) {
+			dev->current_state = PCI_D3cold;
+			return;
+		}
 		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
 	} else {
@@ -659,8 +670,50 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
  */
 static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
 {
-	if (state == PCI_D0)
+	if (state == PCI_D0) {
 		pci_platform_power_transition(dev, PCI_D0);
+		/*
+		 * Mandatory power management transition delays, see
+		 * PCI Express Base Specification Revision 2.0 Section
+		 * 6.6.1: Conventional Reset.  Do not delay for
+		 * devices powered on/off by corresponding bridge,
+		 * because have already delayed for the bridge.
+		 */
+		if (dev->runtime_d3cold) {
+			msleep(dev->d3cold_delay);
+			/*
+			 * When powering on a bridge from D3cold, the
+			 * whole hierarchy may be powered on into
+			 * D0uninitialized state, resume them to give
+			 * them a chance to suspend again
+			 */
+			pci_wakeup_bus(dev->subordinate);
+		}
+	}
+}
+
+/**
+ * __pci_dev_set_current_state - Set current state of a PCI device
+ * @dev: Device to handle
+ * @data: pointer to state to be set
+ */
+static int __pci_dev_set_current_state(struct pci_dev *dev, void *data)
+{
+	pci_power_t state = *(pci_power_t *)data;
+
+	dev->current_state = state;
+	return 0;
+}
+
+/**
+ * __pci_bus_set_current_state - Walk given bus and set current state of devices
+ * @bus: Top bus of the subtree to walk.
+ * @state: state to be set
+ */
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
+{
+	if (bus)
+		pci_walk_bus(bus, __pci_dev_set_current_state, &state);
 }
 
 /**
@@ -672,8 +725,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
  */
 int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
 {
-	return state >= PCI_D0 ?
-			pci_platform_power_transition(dev, state) : -EINVAL;
+	int ret;
+
+	if (state < PCI_D0)
+		return -EINVAL;
+	ret = pci_platform_power_transition(dev, state);
+	/* Power off the bridge may power off the whole hierarchy */
+	if (!ret && state == PCI_D3cold)
+		__pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
 
@@ -697,8 +757,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	int error;
 
 	/* bound the state we're entering */
-	if (state > PCI_D3hot)
-		state = PCI_D3hot;
+	if (state > PCI_D3cold)
+		state = PCI_D3cold;
 	else if (state < PCI_D0)
 		state = PCI_D0;
 	else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
@@ -713,10 +773,15 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 	/* This device is quirked not to be put into D3, so
 	   don't put it in D3 */
-	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+	if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	error = pci_raw_set_power_state(dev, state);
+	/*
+	 * To put device in D3cold, we put device into D3hot in native
+	 * way, then put device into D3cold with platform ops
+	 */
+	error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
+					PCI_D3hot : state);
 
 	if (!__pci_complete_power_transition(dev, state))
 		error = 0;
@@ -1459,6 +1524,28 @@ void pci_pme_wakeup_bus(struct pci_bus *bus)
 		pci_walk_bus(bus, pci_pme_wakeup, (void *)true);
 }
 
+/**
+ * pci_wakeup - Wake up a PCI device
+ * @dev: Device to handle.
+ * @ign: ignored parameter
+ */
+static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
+{
+	pci_wakeup_event(pci_dev);
+	pm_request_resume(&pci_dev->dev);
+	return 0;
+}
+
+/**
+ * pci_wakeup_bus - Walk given bus and wake up devices on it
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_wakeup_bus(struct pci_bus *bus)
+{
+	if (bus)
+		pci_walk_bus(bus, pci_wakeup, NULL);
+}
+
 /**
  * pci_pme_capable - check the capability of PCI device to generate PME#
  * @dev: PCI device to handle.
@@ -1480,6 +1567,16 @@ static void pci_pme_list_scan(struct work_struct *work)
 	if (!list_empty(&pci_pme_list)) {
 		list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
 			if (pme_dev->dev->pme_poll) {
+				struct pci_dev *bridge;
+
+				bridge = pme_dev->dev->bus->self;
+				/*
+				 * If bridge is in low power state, the
+				 * configuration space of subordinate devices
+				 * may be not accessible
+				 */
+				if (bridge && bridge->current_state != PCI_D0)
+					continue;
 				pci_pme_wakeup(pme_dev->dev, NULL);
 			} else {
 				list_del(&pme_dev->list);
@@ -1706,6 +1803,10 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	/* D3cold during system suspend/hibernate is not supported */
+	if (target_state > PCI_D3hot)
+		target_state = PCI_D3hot;
+
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);
@@ -1743,12 +1844,16 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	dev->runtime_d3cold = target_state == PCI_D3cold;
+
 	__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
 
 	error = pci_set_power_state(dev, target_state);
 
-	if (error)
+	if (error) {
 		__pci_enable_wake(dev, target_state, true, false);
+		dev->runtime_d3cold = false;
+	}
 
 	return error;
 }
@@ -1818,6 +1923,7 @@ void pci_pm_init(struct pci_dev *dev)
 
 	dev->pm_cap = pm;
 	dev->d3_delay = PCI_PM_D3_WAIT;
+	dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
 
 	dev->d1_support = false;
 	dev->d2_support = false;

drivers/pci/pci.h

@@ -70,6 +70,7 @@ extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
 extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern int pci_finish_runtime_suspend(struct pci_dev *dev);
 extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+extern void pci_wakeup_bus(struct pci_bus *bus);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);

drivers/pci/pcie/portdrv_pci.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 #include <linux/init.h>
 #include <linux/pcieport_if.h>
 #include <linux/aer.h>
@@ -99,6 +100,51 @@ static int pcie_port_resume_noirq(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_RUNTIME
+struct d3cold_info {
+	bool no_d3cold;
+	unsigned int d3cold_delay;
+};
+
+static int pci_dev_d3cold_info(struct pci_dev *pdev, void *data)
+{
+	struct d3cold_info *info = data;
+
+	info->d3cold_delay = max_t(unsigned int, pdev->d3cold_delay,
+				   info->d3cold_delay);
+	if (pdev->no_d3cold)
+		info->no_d3cold = true;
+	return 0;
+}
+
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct d3cold_info d3cold_info = {
+		.no_d3cold	= false,
+		.d3cold_delay	= PCI_PM_D3_WAIT,
+	};
+
+	/*
+	 * If any subordinate device disable D3cold, we should not put
+	 * the port into D3cold.  The D3cold delay of port should be
+	 * the max of that of all subordinate devices.
+	 */
+	pci_walk_bus(pdev->subordinate, pci_dev_d3cold_info, &d3cold_info);
+	pdev->no_d3cold = d3cold_info.no_d3cold;
+	pdev->d3cold_delay = d3cold_info.d3cold_delay;
+	return 0;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+#else
+#define pcie_port_runtime_suspend	NULL
+#define pcie_port_runtime_resume	NULL
+#endif
+
 static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.suspend	= pcie_port_device_suspend,
 	.resume		= pcie_port_device_resume,
@@ -107,6 +153,8 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.poweroff	= pcie_port_device_suspend,
 	.restore	= pcie_port_device_resume,
 	.resume_noirq	= pcie_port_resume_noirq,
+	.runtime_suspend = pcie_port_runtime_suspend,
+	.runtime_resume = pcie_port_runtime_resume,
 };
 
 #define PCIE_PORTDRV_PM_OPS	(&pcie_portdrv_pm_ops)
@@ -116,6 +164,14 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 #define PCIE_PORTDRV_PM_OPS	NULL
 #endif /* !PM */
 
+/*
+ * PCIe port runtime suspend is broken for some chipsets, so use a
+ * black list to disable runtime PM for these chipsets.
+ */
+static const struct pci_device_id port_runtime_pm_black_list[] = {
+	{ /* end: all zeroes */ }
+};
+
 /*
  * pcie_portdrv_probe - Probe PCI-Express port devices
  * @dev: PCI-Express port device being probed
@@ -144,12 +200,16 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
 		return status;
 
 	pci_save_state(dev);
+	if (!pci_match_id(port_runtime_pm_black_list, dev))
+		pm_runtime_put_noidle(&dev->dev);
 
 	return 0;
 }
 
 static void pcie_portdrv_remove(struct pci_dev *dev)
 {
+	if (!pci_match_id(port_runtime_pm_black_list, dev))
+		pm_runtime_get_noresume(&dev->dev);
 	pcie_port_device_remove(dev);
 	pci_disable_device(dev);
 }

drivers/pnp/pnpacpi/core.c

@@ -170,8 +170,8 @@ static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
 	}
 
 	if (acpi_bus_power_manageable(handle)) {
-		int power_state = acpi_pm_device_sleep_state(&dev->dev, NULL);
-
+		int power_state = acpi_pm_device_sleep_state(&dev->dev, NULL,
+							     ACPI_STATE_D3);
 		if (power_state < 0)
 			power_state = (state.event == PM_EVENT_ON) ?
 					ACPI_STATE_D0 : ACPI_STATE_D3;

include/acpi/acpi_bus.h

@@ -415,13 +415,13 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
 #ifdef CONFIG_PM
-int acpi_pm_device_sleep_state(struct device *, int *);
+int acpi_pm_device_sleep_state(struct device *, int *, int);
 #else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
 {
 	if (p)
 		*p = ACPI_STATE_D0;
-	return ACPI_STATE_D3;
+	return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
 }
 #endif
 

include/linux/pci.h

@@ -134,6 +134,7 @@ static inline const char *pci_power_name(pci_power_t state)
 
 #define PCI_PM_D2_DELAY		200
 #define PCI_PM_D3_WAIT		10
+#define PCI_PM_D3COLD_WAIT	100
 #define PCI_PM_BUS_WAIT		50
 
 /** The pci_channel state describes connectivity between the CPU and
@@ -278,11 +279,18 @@ struct pci_dev {
 	unsigned int	pme_poll:1;	/* Poll device's PME status bit */
 	unsigned int	d1_support:1;	/* Low power state D1 is supported */
 	unsigned int	d2_support:1;	/* Low power state D2 is supported */
-	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
+	unsigned int	no_d1d2:1;	/* D1 and D2 are forbidden */
+	unsigned int	no_d3cold:1;	/* D3cold is forbidden */
+	unsigned int	d3cold_allowed:1;	/* D3cold is allowed by user */
 	unsigned int	mmio_always_on:1;	/* disallow turning off io/mem
 						   decoding during bar sizing */
 	unsigned int	wakeup_prepared:1;
+	unsigned int	runtime_d3cold:1;	/* whether go through runtime
+						   D3cold, not set for devices
+						   powered on/off by the
+						   corresponding bridge */
 	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
+	unsigned int	d3cold_delay;	/* D3cold->D0 transition time in ms */
 
 #ifdef CONFIG_PCIEASPM
 	struct pcie_link_state	*link_state;	/* ASPM link state. */