Merge series "spi: Add FSI-attached SPI controller driver" from Eddie James...

Merge series "spi: Add FSI-attached SPI controller driver" from Eddie James <eajames@linux.ibm.com>:

This series adds a dts binding and a driver for a new SPI controller that is
accessed over FSI bus.

Eddie James (2):
  dt-bindings: fsi: Add FSI2SPI bindings
  spi: Add FSI-attached SPI controller driver

 .../devicetree/bindings/fsi/ibm,fsi2spi.yaml  |  36 ++
 MAINTAINERS                                   |   7 +
 drivers/spi/Kconfig                           |   7 +
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-fsi.c                         | 558 ++++++++++++++++++
 5 files changed, 609 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
 create mode 100644 drivers/spi/spi-fsi.c

--
2.24.0

Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml

+# SPDX-License-Identifier: (GPL-2.0-or-later)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI controllers
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
+  node will always be a child of an FSI CFAM node; see fsi.txt for details on
+  FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
+  SPI controllers.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2spi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    fsi2spi@1c00 {
+        compatible = "ibm,fsi2spi";
+        reg = <0x1c00 0x400>;
+    };

MAINTAINERS

@@ -6861,6 +6861,13 @@ S:	Maintained
 F:	drivers/i2c/busses/i2c-fsi.c
 F:	Documentation/devicetree/bindings/i2c/i2c-fsi.txt
 
+FSI-ATTACHED SPI DRIVER
+M:	Eddie James <eajames@linux.ibm.com>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	drivers/spi/spi-fsi.c
+F:	Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+
 FSNOTIFY: FILESYSTEM NOTIFICATION INFRASTRUCTURE
 M:	Jan Kara <jack@suse.cz>
 R:	Amir Goldstein <amir73il@gmail.com>

drivers/spi/Kconfig

@@ -271,6 +271,13 @@ config SPI_FALCON
 	  has only been tested with m25p80 type chips. The hardware has no
 	  support for other types of SPI peripherals.
 
+config SPI_FSI
+	tristate "FSI SPI driver"
+	depends on FSI
+	help
+	  This enables support for the driver for FSI bus attached SPI
+	  controllers.
+
 config SPI_FSL_LPSPI
 	tristate "Freescale i.MX LPSPI controller"
 	depends on ARCH_MXC || COMPILE_TEST

drivers/spi/Makefile

@@ -42,6 +42,7 @@ spi-dw-midpci-objs			:= spi-dw-pci.o spi-dw-mid.o
 obj-$(CONFIG_SPI_EFM32)			+= spi-efm32.o
 obj-$(CONFIG_SPI_EP93XX)		+= spi-ep93xx.o
 obj-$(CONFIG_SPI_FALCON)		+= spi-falcon.o
+obj-$(CONFIG_SPI_FSI)			+= spi-fsi.o
 obj-$(CONFIG_SPI_FSL_CPM)		+= spi-fsl-cpm.o
 obj-$(CONFIG_SPI_FSL_DSPI)		+= spi-fsl-dspi.o
 obj-$(CONFIG_SPI_FSL_LIB)		+= spi-fsl-lib.o

drivers/spi/spi-fsi.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (C) IBM Corporation 2020
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/fsi.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+#define FSI_ENGID_SPI			0x23
+#define FSI_MBOX_ROOT_CTRL_8		0x2860
+
+#define FSI2SPI_DATA0			0x00
+#define FSI2SPI_DATA1			0x04
+#define FSI2SPI_CMD			0x08
+#define  FSI2SPI_CMD_WRITE		 BIT(31)
+#define FSI2SPI_RESET			0x18
+#define FSI2SPI_STATUS			0x1c
+#define  FSI2SPI_STATUS_ANY_ERROR	 BIT(31)
+#define FSI2SPI_IRQ			0x20
+
+#define SPI_FSI_BASE			0x70000
+#define SPI_FSI_INIT_TIMEOUT_MS		1000
+#define SPI_FSI_MAX_TRANSFER_SIZE	2048
+
+#define SPI_FSI_ERROR			0x0
+#define SPI_FSI_COUNTER_CFG		0x1
+#define  SPI_FSI_COUNTER_CFG_LOOPS(x)	 (((u64)(x) & 0xffULL) << 32)
+#define SPI_FSI_CFG1			0x2
+#define SPI_FSI_CLOCK_CFG		0x3
+#define  SPI_FSI_CLOCK_CFG_MM_ENABLE	 BIT_ULL(32)
+#define  SPI_FSI_CLOCK_CFG_ECC_DISABLE	 (BIT_ULL(35) | BIT_ULL(33))
+#define  SPI_FSI_CLOCK_CFG_RESET1	 (BIT_ULL(36) | BIT_ULL(38))
+#define  SPI_FSI_CLOCK_CFG_RESET2	 (BIT_ULL(37) | BIT_ULL(39))
+#define  SPI_FSI_CLOCK_CFG_MODE		 (BIT_ULL(41) | BIT_ULL(42))
+#define  SPI_FSI_CLOCK_CFG_SCK_RECV_DEL	 GENMASK_ULL(51, 44)
+#define   SPI_FSI_CLOCK_CFG_SCK_NO_DEL	  BIT_ULL(51)
+#define  SPI_FSI_CLOCK_CFG_SCK_DIV	 GENMASK_ULL(63, 52)
+#define SPI_FSI_MMAP			0x4
+#define SPI_FSI_DATA_TX			0x5
+#define SPI_FSI_DATA_RX			0x6
+#define SPI_FSI_SEQUENCE		0x7
+#define  SPI_FSI_SEQUENCE_STOP		 0x00
+#define  SPI_FSI_SEQUENCE_SEL_SLAVE(x)	 (0x10 | ((x) & 0xf))
+#define  SPI_FSI_SEQUENCE_SHIFT_OUT(x)	 (0x30 | ((x) & 0xf))
+#define  SPI_FSI_SEQUENCE_SHIFT_IN(x)	 (0x40 | ((x) & 0xf))
+#define  SPI_FSI_SEQUENCE_COPY_DATA_TX	 0xc0
+#define  SPI_FSI_SEQUENCE_BRANCH(x)	 (0xe0 | ((x) & 0xf))
+#define SPI_FSI_STATUS			0x8
+#define  SPI_FSI_STATUS_ERROR		 \
+	(GENMASK_ULL(31, 21) | GENMASK_ULL(15, 12))
+#define  SPI_FSI_STATUS_SEQ_STATE	 GENMASK_ULL(55, 48)
+#define   SPI_FSI_STATUS_SEQ_STATE_IDLE	  BIT_ULL(48)
+#define  SPI_FSI_STATUS_TDR_UNDERRUN	 BIT_ULL(57)
+#define  SPI_FSI_STATUS_TDR_OVERRUN	 BIT_ULL(58)
+#define  SPI_FSI_STATUS_TDR_FULL	 BIT_ULL(59)
+#define  SPI_FSI_STATUS_RDR_UNDERRUN	 BIT_ULL(61)
+#define  SPI_FSI_STATUS_RDR_OVERRUN	 BIT_ULL(62)
+#define  SPI_FSI_STATUS_RDR_FULL	 BIT_ULL(63)
+#define  SPI_FSI_STATUS_ANY_ERROR	 \
+	(SPI_FSI_STATUS_ERROR | SPI_FSI_STATUS_TDR_UNDERRUN | \
+	 SPI_FSI_STATUS_TDR_OVERRUN | SPI_FSI_STATUS_RDR_UNDERRUN | \
+	 SPI_FSI_STATUS_RDR_OVERRUN)
+#define SPI_FSI_PORT_CTRL		0x9
+
+struct fsi_spi {
+	struct device *dev;	/* SPI controller device */
+	struct fsi_device *fsi;	/* FSI2SPI CFAM engine device */
+	u32 base;
+};
+
+struct fsi_spi_sequence {
+	int bit;
+	u64 data;
+};
+
+static int fsi_spi_check_status(struct fsi_spi *ctx)
+{
+	int rc;
+	u32 sts;
+	__be32 sts_be;
+
+	rc = fsi_device_read(ctx->fsi, FSI2SPI_STATUS, &sts_be,
+			     sizeof(sts_be));
+	if (rc)
+		return rc;
+
+	sts = be32_to_cpu(sts_be);
+	if (sts & FSI2SPI_STATUS_ANY_ERROR) {
+		dev_err(ctx->dev, "Error with FSI2SPI interface: %08x.\n", sts);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int fsi_spi_read_reg(struct fsi_spi *ctx, u32 offset, u64 *value)
+{
+	int rc;
+	__be32 cmd_be;
+	__be32 data_be;
+	u32 cmd = offset + ctx->base;
+
+	*value = 0ULL;
+
+	if (cmd & FSI2SPI_CMD_WRITE)
+		return -EINVAL;
+
+	cmd_be = cpu_to_be32(cmd);
+	rc = fsi_device_write(ctx->fsi, FSI2SPI_CMD, &cmd_be, sizeof(cmd_be));
+	if (rc)
+		return rc;
+
+	rc = fsi_spi_check_status(ctx);
+	if (rc)
+		return rc;
+
+	rc = fsi_device_read(ctx->fsi, FSI2SPI_DATA0, &data_be,
+			     sizeof(data_be));
+	if (rc)
+		return rc;
+
+	*value |= (u64)be32_to_cpu(data_be) << 32;
+
+	rc = fsi_device_read(ctx->fsi, FSI2SPI_DATA1, &data_be,
+			     sizeof(data_be));
+	if (rc)
+		return rc;
+
+	*value |= (u64)be32_to_cpu(data_be);
+	dev_dbg(ctx->dev, "Read %02x[%016llx].\n", offset, *value);
+
+	return 0;
+}
+
+static int fsi_spi_write_reg(struct fsi_spi *ctx, u32 offset, u64 value)
+{
+	int rc;
+	__be32 cmd_be;
+	__be32 data_be;
+	u32 cmd = offset + ctx->base;
+
+	if (cmd & FSI2SPI_CMD_WRITE)
+		return -EINVAL;
+
+	dev_dbg(ctx->dev, "Write %02x[%016llx].\n", offset, value);
+
+	data_be = cpu_to_be32(upper_32_bits(value));
+	rc = fsi_device_write(ctx->fsi, FSI2SPI_DATA0, &data_be,
+			      sizeof(data_be));
+	if (rc)
+		return rc;
+
+	data_be = cpu_to_be32(lower_32_bits(value));
+	rc = fsi_device_write(ctx->fsi, FSI2SPI_DATA1, &data_be,
+			      sizeof(data_be));
+	if (rc)
+		return rc;
+
+	cmd_be = cpu_to_be32(cmd | FSI2SPI_CMD_WRITE);
+	rc = fsi_device_write(ctx->fsi, FSI2SPI_CMD, &cmd_be, sizeof(cmd_be));
+	if (rc)
+		return rc;
+
+	return fsi_spi_check_status(ctx);
+}
+
+static int fsi_spi_data_in(u64 in, u8 *rx, int len)
+{
+	int i;
+	int num_bytes = min(len, 8);
+
+	for (i = 0; i < num_bytes; ++i)
+		rx[i] = (u8)(in >> (8 * ((num_bytes - 1) - i)));
+
+	return num_bytes;
+}
+
+static int fsi_spi_data_out(u64 *out, const u8 *tx, int len)
+{
+	int i;
+	int num_bytes = min(len, 8);
+	u8 *out_bytes = (u8 *)out;
+
+	/* Unused bytes of the tx data should be 0. */
+	*out = 0ULL;
+
+	for (i = 0; i < num_bytes; ++i)
+		out_bytes[8 - (i + 1)] = tx[i];
+
+	return num_bytes;
+}
+
+static int fsi_spi_reset(struct fsi_spi *ctx)
+{
+	int rc;
+
+	dev_dbg(ctx->dev, "Resetting SPI controller.\n");
+
+	rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
+			       SPI_FSI_CLOCK_CFG_RESET1);
+	if (rc)
+		return rc;
+
+	return fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
+				 SPI_FSI_CLOCK_CFG_RESET2);
+}
+
+static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
+{
+	/*
+	 * Add the next byte of instruction to the 8-byte sequence register.
+	 * Then decrement the counter so that the next instruction will go in
+	 * the right place. Return the number of "slots" left in the sequence
+	 * register.
+	 */
+	seq->data |= (u64)val << seq->bit;
+	seq->bit -= 8;
+
+	return ((64 - seq->bit) / 8) - 2;
+}
+
+static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
+{
+	seq->bit = 56;
+	seq->data = 0ULL;
+}
+
+static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
+				     struct fsi_spi_sequence *seq,
+				     struct spi_transfer *transfer)
+{
+	int loops;
+	int idx;
+	int rc;
+	u8 len = min(transfer->len, 8U);
+	u8 rem = transfer->len % len;
+
+	loops = transfer->len / len;
+
+	if (transfer->tx_buf) {
+		idx = fsi_spi_sequence_add(seq,
+					   SPI_FSI_SEQUENCE_SHIFT_OUT(len));
+		if (rem)
+			rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem);
+	} else if (transfer->rx_buf) {
+		idx = fsi_spi_sequence_add(seq,
+					   SPI_FSI_SEQUENCE_SHIFT_IN(len));
+		if (rem)
+			rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem);
+	} else {
+		return -EINVAL;
+	}
+
+	if (loops > 1) {
+		fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
+
+		if (rem)
+			fsi_spi_sequence_add(seq, rem);
+
+		rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG,
+				       SPI_FSI_COUNTER_CFG_LOOPS(loops - 1));
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int fsi_spi_transfer_data(struct fsi_spi *ctx,
+				 struct spi_transfer *transfer)
+{
+	int rc = 0;
+	u64 status = 0ULL;
+
+	if (transfer->tx_buf) {
+		int nb;
+		int sent = 0;
+		u64 out = 0ULL;
+		const u8 *tx = transfer->tx_buf;
+
+		while (transfer->len > sent) {
+			nb = fsi_spi_data_out(&out, &tx[sent],
+					      (int)transfer->len - sent);
+
+			rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, out);
+			if (rc)
+				return rc;
+
+			do {
+				rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
+						      &status);
+				if (rc)
+					return rc;
+
+				if (status & SPI_FSI_STATUS_ANY_ERROR) {
+					rc = fsi_spi_reset(ctx);
+					if (rc)
+						return rc;
+
+					return -EREMOTEIO;
+				}
+			} while (status & SPI_FSI_STATUS_TDR_FULL);
+
+			sent += nb;
+		}
+	} else if (transfer->rx_buf) {
+		int recv = 0;
+		u64 in = 0ULL;
+		u8 *rx = transfer->rx_buf;
+
+		while (transfer->len > recv) {
+			do {
+				rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
+						      &status);
+				if (rc)
+					return rc;
+
+				if (status & SPI_FSI_STATUS_ANY_ERROR) {
+					rc = fsi_spi_reset(ctx);
+					if (rc)
+						return rc;
+
+					return -EREMOTEIO;
+				}
+			} while (!(status & SPI_FSI_STATUS_RDR_FULL));
+
+			rc = fsi_spi_read_reg(ctx, SPI_FSI_DATA_RX, &in);
+			if (rc)
+				return rc;
+
+			recv += fsi_spi_data_in(in, &rx[recv],
+						(int)transfer->len - recv);
+		}
+	}
+
+	return 0;
+}
+
+static int fsi_spi_transfer_init(struct fsi_spi *ctx)
+{
+	int rc;
+	bool reset = false;
+	unsigned long end;
+	u64 seq_state;
+	u64 clock_cfg = 0ULL;
+	u64 status = 0ULL;
+	u64 wanted_clock_cfg = SPI_FSI_CLOCK_CFG_ECC_DISABLE |
+		SPI_FSI_CLOCK_CFG_SCK_NO_DEL |
+		FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 4);
+
+	end = jiffies + msecs_to_jiffies(SPI_FSI_INIT_TIMEOUT_MS);
+	do {
+		if (time_after(jiffies, end))
+			return -ETIMEDOUT;
+
+		rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS, &status);
+		if (rc)
+			return rc;
+
+		seq_state = status & SPI_FSI_STATUS_SEQ_STATE;
+
+		if (status & (SPI_FSI_STATUS_ANY_ERROR |
+			      SPI_FSI_STATUS_TDR_FULL |
+			      SPI_FSI_STATUS_RDR_FULL)) {
+			if (reset)
+				return -EIO;
+
+			rc = fsi_spi_reset(ctx);
+			if (rc)
+				return rc;
+
+			reset = true;
+			continue;
+		}
+	} while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE));
+
+	rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg);
+	if (rc)
+		return rc;
+
+	if ((clock_cfg & (SPI_FSI_CLOCK_CFG_MM_ENABLE |
+			  SPI_FSI_CLOCK_CFG_ECC_DISABLE |
+			  SPI_FSI_CLOCK_CFG_MODE |
+			  SPI_FSI_CLOCK_CFG_SCK_RECV_DEL |
+			  SPI_FSI_CLOCK_CFG_SCK_DIV)) != wanted_clock_cfg)
+		rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
+				       wanted_clock_cfg);
+
+	return rc;
+}
+
+static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
+					struct spi_message *mesg)
+{
+	int rc = 0;
+	u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1);
+	struct spi_transfer *transfer;
+	struct fsi_spi *ctx = spi_controller_get_devdata(ctlr);
+
+	list_for_each_entry(transfer, &mesg->transfers, transfer_list) {
+		struct fsi_spi_sequence seq;
+		struct spi_transfer *next = NULL;
+
+		/* Sequencer must do shift out (tx) first. */
+		if (!transfer->tx_buf ||
+		    transfer->len > SPI_FSI_MAX_TRANSFER_SIZE) {
+			rc = -EINVAL;
+			goto error;
+		}
+
+		dev_dbg(ctx->dev, "Start tx of %d bytes.\n", transfer->len);
+
+		rc = fsi_spi_transfer_init(ctx);
+		if (rc < 0)
+			goto error;
+
+		fsi_spi_sequence_init(&seq);
+		fsi_spi_sequence_add(&seq, seq_slave);
+
+		rc = fsi_spi_sequence_transfer(ctx, &seq, transfer);
+		if (rc)
+			goto error;
+
+		if (!list_is_last(&transfer->transfer_list,
+				  &mesg->transfers)) {
+			next = list_next_entry(transfer, transfer_list);
+
+			/* Sequencer can only do shift in (rx) after tx. */
+			if (next->rx_buf) {
+				if (next->len > SPI_FSI_MAX_TRANSFER_SIZE) {
+					rc = -EINVAL;
+					goto error;
+				}
+
+				dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n",
+					next->len);
+
+				rc = fsi_spi_sequence_transfer(ctx, &seq,
+							       next);
+				if (rc)
+					goto error;
+			} else {
+				next = NULL;
+			}
+		}
+
+		fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SEL_SLAVE(0));
+
+		rc = fsi_spi_write_reg(ctx, SPI_FSI_SEQUENCE, seq.data);
+		if (rc)
+			goto error;
+
+		rc = fsi_spi_transfer_data(ctx, transfer);
+		if (rc)
+			goto error;
+
+		if (next) {
+			rc = fsi_spi_transfer_data(ctx, next);
+			if (rc)
+				goto error;
+
+			transfer = next;
+		}
+	}
+
+error:
+	mesg->status = rc;
+	spi_finalize_current_message(ctlr);
+
+	return rc;
+}
+
+static size_t fsi_spi_max_transfer_size(struct spi_device *spi)
+{
+	return SPI_FSI_MAX_TRANSFER_SIZE;
+}
+
+static int fsi_spi_probe(struct device *dev)
+{
+	int rc;
+	u32 root_ctrl_8;
+	struct device_node *np;
+	int num_controllers_registered = 0;
+	struct fsi_device *fsi = to_fsi_dev(dev);
+
+	/*
+	 * Check the SPI mux before attempting to probe. If the mux isn't set
+	 * then the SPI controllers can't access their slave devices.
+	 */
+	rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8,
+			    sizeof(root_ctrl_8));
+	if (rc)
+		return rc;
+
+	if (!root_ctrl_8) {
+		dev_dbg(dev, "SPI mux not set, aborting probe.\n");
+		return -ENODEV;
+	}
+
+	for_each_available_child_of_node(dev->of_node, np) {
+		u32 base;
+		struct fsi_spi *ctx;
+		struct spi_controller *ctlr;
+
+		if (of_property_read_u32(np, "reg", &base))
+			continue;
+
+		ctlr = spi_alloc_master(dev, sizeof(*ctx));
+		if (!ctlr)
+			break;
+
+		ctlr->dev.of_node = np;
+		ctlr->num_chipselect = of_get_available_child_count(np) ?: 1;
+		ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX;
+		ctlr->max_transfer_size = fsi_spi_max_transfer_size;
+		ctlr->transfer_one_message = fsi_spi_transfer_one_message;
+
+		ctx = spi_controller_get_devdata(ctlr);
+		ctx->dev = &ctlr->dev;
+		ctx->fsi = fsi;
+		ctx->base = base + SPI_FSI_BASE;
+
+		rc = devm_spi_register_controller(dev, ctlr);
+		if (rc)
+			spi_controller_put(ctlr);
+		else
+			num_controllers_registered++;
+	}
+
+	if (!num_controllers_registered)
+		return -ENODEV;
+
+	return 0;
+}
+
+static const struct fsi_device_id fsi_spi_ids[] = {
+	{ FSI_ENGID_SPI, FSI_VERSION_ANY },
+	{ }
+};
+MODULE_DEVICE_TABLE(fsi, fsi_spi_ids);
+
+static struct fsi_driver fsi_spi_driver = {
+	.id_table = fsi_spi_ids,
+	.drv = {
+		.name = "spi-fsi",
+		.bus = &fsi_bus_type,
+		.probe = fsi_spi_probe,
+	},
+};
+module_fsi_driver(fsi_spi_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("FSI attached SPI controller");
+MODULE_LICENSE("GPL");