[PATCH] irq-flags: ide: Use the new IRQF_ constants

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/ide/ide-probe.c

@@ -1004,7 +1004,7 @@ static int ide_init_queue(ide_drive_t *drive)
  * and irq serialization situations.  This is somewhat complex because
  * it handles static as well as dynamic (PCMCIA) IDE interfaces.
  *
- * The SA_INTERRUPT in sa_flags means ide_intr() is always entered with
+ * The IRQF_DISABLED in sa_flags means ide_intr() is always entered with
  * interrupts completely disabled.  This can be bad for interrupt latency,
  * but anything else has led to problems on some machines.  We re-enable
  * interrupts as much as we can safely do in most places.
@@ -1090,15 +1090,15 @@ static int init_irq (ide_hwif_t *hwif)
 	 * Allocate the irq, if not already obtained for another hwif
 	 */
 	if (!match || match->irq != hwif->irq) {
-		int sa = SA_INTERRUPT;
+		int sa = IRQF_DISABLED;
 #if defined(__mc68000__) || defined(CONFIG_APUS)
-		sa = SA_SHIRQ;
+		sa = IRQF_SHARED;
 #endif /* __mc68000__ || CONFIG_APUS */
 
 		if (IDE_CHIPSET_IS_PCI(hwif->chipset)) {
-			sa = SA_SHIRQ;
+			sa = IRQF_SHARED;
 #ifndef CONFIG_IDEPCI_SHARE_IRQ
-			sa |= SA_INTERRUPT;
+			sa |= IRQF_DISABLED;
 #endif /* CONFIG_IDEPCI_SHARE_IRQ */
 		}
 

drivers/ide/legacy/hd.c

@@ -691,7 +691,7 @@ static struct block_device_operations hd_fops = {
 };
 
 /*
- * This is the hard disk IRQ description. The SA_INTERRUPT in sa_flags
+ * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags
  * means we run the IRQ-handler with interrupts disabled:  this is bad for
  * interrupt latency, but anything else has led to problems on some
  * machines.
@@ -806,7 +806,7 @@ static int __init hd_init(void)
 			p->cyl, p->head, p->sect);
 	}
 
-	if (request_irq(HD_IRQ, hd_interrupt, SA_INTERRUPT, "hd", NULL)) {
+	if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) {
 		printk("hd: unable to get IRQ%d for the hard disk driver\n",
 			HD_IRQ);
 		goto out1;