Merge tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux

Pull clock framework update from Michael Turquette:
 "The common clock framework changes for 3.10 include many fixes for
  existing platforms, as well as adoption of the framework by new
  platforms and devices.

  Some long-needed fixes to the core framework are here as well as new
  features such as improved initialization of clocks from DT as well as
  framework reentrancy for nested clock operations."

* tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux: (44 commits)
  clk: add clk_ignore_unused option to keep boot clocks on
  clk: ux500: fix mismatched types
  clk: vexpress: Add separate SP810 driver
  clk: si5351: make clk-si5351 depend on CONFIG_OF
  clk: export __clk_get_flags for modular clock providers
  clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.
  clk: sunxi: Unify oscillator clock
  clk: composite: allow fixed rates & fixed dividers
  clk: composite: rename 'div' references to 'rate'
  clk: add si5351 i2c common clock driver
  clk: add device tree fixed-factor-clock binding support
  clk: Properly handle notifier return values
  clk: ux500: abx500: Define clock tree for ab850x
  clk: ux500: Add support for sysctrl clocks
  clk: mvebu: Fix valid value range checking for cpu_freq_select
  clk: Fixup locking issues for clk_set_parent
  clk: Fixup errorhandling for clk_set_parent
  clk: Restructure code for __clk_reparent
  clk: sunxi: drop an unnecesary kmalloc
  clk: sunxi: drop CLK_IGNORE_UNUSED
  ...

Documentation/arm/sunxi/clocks.txt

+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+   system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+   carelessly the system would stop functioning, but with the right
+   steps, one can gate it and keep the system running. Consider this
+   simplified suspend example:
+
+   While the system is operational, you would see something like
+
+      24MHz         32kHz
+       |
+      PLL1
+       \
+        \_ CPU Mux
+             |
+           [CPU]
+
+   When you are about to suspend, you switch the CPU Mux to the 32kHz
+   oscillator:
+
+      24Mhz         32kHz
+       |              |
+      PLL1            |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+    Finally you can gate the main oscillator
+
+                    32kHz
+                      |
+                      |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+   you can find it at
+
+        http://linux-sunxi.org/A10/CCM
+
+   The authoritative source for information at this time is the ccmu driver
+   released by Allwinner, you can find it at
+
+        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu

Documentation/clk.txt

@@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw)
 };
 
 Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock.  A cell marked as "y" means
+hardware capabilities of that clock.  A cell marked as "y" means
 mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary.  Empty cells are either
+callback is invalid or otherwise unnecessary.  Empty cells are either
 optional or must be evaluated on a case-by-case basis.
 
                            clock hardware characteristics
@@ -231,3 +231,14 @@ To better enforce this policy, always follow this simple rule: any
 statically initialized clock data MUST be defined in a separate file
 from the logic that implements its ops.  Basically separate the logic
 from the data and all is well.
+
+	Part 6 - Disabling clock gating of unused clocks
+
+Sometimes during development it can be useful to be able to bypass the
+default disabling of unused clocks. For example, if drivers aren't enabling
+clocks properly but rely on them being on from the bootloader, bypassing
+the disabling means that the driver will remain functional while the issues
+are sorted out.
+
+To bypass this disabling, include "clk_ignore_unused" in the bootargs to the
+kernel.

Documentation/devicetree/bindings/clock/axi-clkgen.txt

+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock@0xff000000 {
+		compatible = "adi,axi-clkgen";
+		#clock-cells = <0>;
+		reg = <0xff000000 0x1000>;
+		clocks = <&osc 1>;
+	};

Documentation/devicetree/bindings/clock/fixed-factor-clock.txt

+Binding for simple fixed factor rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-div: fixed divider.
+- clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		div = <2>;
+		mult = <1>;
+	};

Documentation/devicetree/bindings/clock/silabs,si5351.txt

+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with upto 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be xtal reference clock or xtal and clkin for
+  si5351c only.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+  to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+  0 = multisynth N
+  1 = multisynth 0 for output clocks 0-3, else multisynth4
+  2 = xtal
+  3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+  divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+	/* Si5351a msop10 i2c clock generator */
+	si5351a: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		/*
+		 * overwrite clkout0 configuration with:
+		 * - 8mA output drive strength
+		 * - pll0 as clock source of multisynth0
+		 * - multisynth0 as clock source of output divider
+		 * - multisynth0 can change pll0
+		 * - set initial clock frequency of 74.25MHz
+		 */
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+			clock-frequency = <74250000>;
+		};
+
+		/*
+		 * overwrite clkout1 configuration with:
+		 * - 4mA output drive strength
+		 * - pll1 as clock source of multisynth1
+		 * - multisynth1 as clock source of output divider
+		 * - multisynth1 can change pll1
+		 */
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <4>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			pll-master;
+		};
+
+		/*
+		 * overwrite clkout2 configuration with:
+		 * - xtal as clock source of output divider
+		 */
+		clkout2 {
+			reg = <2>;
+			silabs,clock-source = <2>;
+		};
+	};
+};

Documentation/devicetree/bindings/clock/sunxi.txt

+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"allwinner,sun4i-osc-clk" - for a gatable oscillator
+	"allwinner,sun4i-pll1-clk" - for the main PLL clock
+	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+	"allwinner,sun4i-axi-clk" - for the AXI clock
+	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
+	"allwinner,sun4i-ahb-clk" - for the AHB clock
+	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
+	"allwinner,sun4i-apb0-clk" - for the APB0 clock
+	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
+	"allwinner,sun4i-apb1-clk" - for the APB1 clock
+	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0 except for
+	"allwinner,sun4i-*-gates-clk" where it shall be set to 1
+
+Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
+- clock-output-names : the corresponding gate names that the clock controls
+
+For example:
+
+osc24M: osc24M@01c20050 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-osc-clk";
+	reg = <0x01c20050 0x4>;
+	clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-pll1-clk";
+	reg = <0x01c20000 0x4>;
+	clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-cpu-clk";
+	reg = <0x01c20054 0x4>;
+	clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
+
+
+
+Gate clock outputs
+
+The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
+their corresponding offsets as present on sun4i are listed below. Note that
+some of these gates are not present on sun5i.
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM                                                                0
+
+  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
+
+    USB0                                                                0
+    EHCI0                                                               1
+    OHCI0                                                               2*
+    EHCI1                                                               3
+    OHCI1                                                               4*
+    SS                                                                  5
+    DMA                                                                 6
+    BIST                                                                7
+    MMC0                                                                8
+    MMC1                                                                9
+    MMC2                                                                10
+    MMC3                                                                11
+    MS                                                                  12**
+    NAND                                                                13
+    SDRAM                                                               14
+
+    ACE                                                                 16
+    EMAC                                                                17
+    TS                                                                  18
+
+    SPI0                                                                20
+    SPI1                                                                21
+    SPI2                                                                22
+    SPI3                                                                23
+    PATA                                                                24
+    SATA                                                                25**
+    GPS                                                                 26*
+
+    VE                                                                  32
+    TVD                                                                 33
+    TVE0                                                                34
+    TVE1                                                                35
+    LCD0                                                                36
+    LCD1                                                                37
+
+    CSI0                                                                40
+    CSI1                                                                41
+
+    HDMI                                                                43
+    DE_BE0                                                              44
+    DE_BE1                                                              45
+    DE_FE0                                                              46
+    DE_FE1                                                              47
+
+    MP                                                                  50
+
+    MALI400                                                             52
+
+  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
+
+    CODEC                                                               0
+    SPDIF                                                               1*
+    AC97                                                                2
+    IIS                                                                 3
+
+    PIO                                                                 5
+    IR0                                                                 6
+    IR1                                                                 7
+
+    KEYPAD                                                              10
+
+  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
+
+    I2C0                                                                0
+    I2C1                                                                1
+    I2C2                                                                2
+
+    CAN                                                                 4
+    SCR                                                                 5
+    PS20                                                                6
+    PS21                                                                7
+
+    UART0                                                               16
+    UART1                                                               17
+    UART2                                                               18
+    UART3                                                               19
+    UART4                                                               20
+    UART5                                                               21
+    UART6                                                               22
+    UART7                                                               23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -49,6 +49,7 @@ samsung	Samsung Semiconductor
 sbs	Smart Battery System
 schindler	Schindler
 sil	Silicon Image
+silabs	Silicon Laboratories
 simtek
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.

Documentation/kernel-parameters.txt

@@ -44,6 +44,7 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
+	CLK	Common clock infrastructure is enabled.
 	DRM	Direct Rendering Management support is enabled.
 	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
@@ -472,6 +473,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	cio_ignore=	[S390]
 			See Documentation/s390/CommonIO for details.
+	clk_ignore_unused
+			[CLK]
+			Keep all clocks already enabled by bootloader on,
+			even if no driver has claimed them. This is useful
+			for debug and development, but should not be
+			needed on a platform with proper driver support.
+			For more information, see Documentation/clk.txt.
 
 	clock=		[BUGS=X86-32, HW] gettimeofday clocksource override.
 			[Deprecated]

arch/arm/mach-imx/clk-busy.c

@@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 
 	busy->mux.reg = reg;
 	busy->mux.shift = shift;
-	busy->mux.width = width;
+	busy->mux.mask = BIT(width) - 1;
 	busy->mux.lock = &imx_ccm_lock;
 	busy->mux_ops = &clk_mux_ops;
 

arch/arm/mach-vexpress/v2m.c

@@ -21,6 +21,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/vexpress.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 
 #include <asm/arch_timer.h>
 #include <asm/mach-types.h>
@@ -433,7 +435,7 @@ static void __init v2m_dt_timer_init(void)
 {
 	struct device_node *node = NULL;
 
-	vexpress_clk_of_init();
+	of_clk_init(NULL);
 
 	do {
 		node = of_find_compatible_node(node, NULL, "arm,sp804");
@@ -441,6 +443,10 @@ static void __init v2m_dt_timer_init(void)
 	if (node) {
 		pr_info("Using SP804 '%s' as a clock & events source\n",
 				node->full_name);
+		WARN_ON(clk_register_clkdev(of_clk_get_by_name(node,
+				"timclken1"), "v2m-timer0", "sp804"));
+		WARN_ON(clk_register_clkdev(of_clk_get_by_name(node,
+				"timclken2"), "v2m-timer1", "sp804"));
 		v2m_sp804_init(of_iomap(node, 0),
 				irq_of_parse_and_map(node, 0));
 	}

drivers/clk/Kconfig

@@ -55,6 +55,16 @@ config COMMON_CLK_MAX77686
 	---help---
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
+config COMMON_CLK_SI5351
+	tristate "Clock driver for SiLabs 5351A/B/C"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	select RATIONAL
+	---help---
+	  This driver supports Silicon Labs 5351A/B/C programmable clock
+	  generators.
+
 config CLK_TWL6040
 	tristate "External McPDM functional clock from twl6040"
 	depends on TWL6040_CORE
@@ -63,6 +73,14 @@ config CLK_TWL6040
 	  McPDM. McPDM module is using the external bit clock on the McPDM bus
 	  as functional clock.
 
+config COMMON_CLK_AXI_CLKGEN
+	tristate "AXI clkgen driver"
+	depends on ARCH_ZYNQ || MICROBLAZE
+	help
+	---help---
+	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
+	  FPGAs. It is commonly used in Analog Devices' reference designs.
+
 endmenu
 
 source "drivers/clk/mvebu/Kconfig"

drivers/clk/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 
 # SoCs specific
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
@@ -23,6 +24,7 @@ ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)		+= mmp/
 endif
 obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
+obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
 obj-$(CONFIG_ARCH_ZYNQ)		+= clk-zynq.o
@@ -31,6 +33,8 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_X86)		+= x86/
 
 # Chip specific
+obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
+obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
 obj-$(CONFIG_CLK_TWL6040)	+= clk-twl6040.o

drivers/clk/clk-axi-clkgen.c

+/*
+ * AXI clkgen driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define AXI_CLKGEN_REG_UPDATE_ENABLE	0x04
+#define AXI_CLKGEN_REG_CLK_OUT1		0x08
+#define AXI_CLKGEN_REG_CLK_OUT2		0x0c
+#define AXI_CLKGEN_REG_CLK_DIV		0x10
+#define AXI_CLKGEN_REG_CLK_FB1		0x14
+#define AXI_CLKGEN_REG_CLK_FB2		0x18
+#define AXI_CLKGEN_REG_LOCK1		0x1c
+#define AXI_CLKGEN_REG_LOCK2		0x20
+#define AXI_CLKGEN_REG_LOCK3		0x24
+#define AXI_CLKGEN_REG_FILTER1		0x28
+#define AXI_CLKGEN_REG_FILTER2		0x2c
+
+struct axi_clkgen {
+	void __iomem *base;
+	struct clk_hw clk_hw;
+};
+
+static uint32_t axi_clkgen_lookup_filter(unsigned int m)
+{
+	switch (m) {
+	case 0:
+		return 0x01001990;
+	case 1:
+		return 0x01001190;
+	case 2:
+		return 0x01009890;
+	case 3:
+		return 0x01001890;
+	case 4:
+		return 0x01008890;
+	case 5 ... 8:
+		return 0x01009090;
+	case 9 ... 11:
+		return 0x01000890;
+	case 12:
+		return 0x08009090;
+	case 13 ... 22:
+		return 0x01001090;
+	case 23 ... 36:
+		return 0x01008090;
+	case 37 ... 46:
+		return 0x08001090;
+	default:
+		return 0x08008090;
+	}
+}
+
+static const uint32_t axi_clkgen_lock_table[] = {
+	0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8,
+	0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8,
+	0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339,
+	0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271,
+	0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4,
+	0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190,
+	0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e,
+	0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c,
+	0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113,
+};
+
+static uint32_t axi_clkgen_lookup_lock(unsigned int m)
+{
+	if (m < ARRAY_SIZE(axi_clkgen_lock_table))
+		return axi_clkgen_lock_table[m];
+	return 0x1f1f00fa;
+}
+
+static const unsigned int fpfd_min = 10000;
+static const unsigned int fpfd_max = 300000;
+static const unsigned int fvco_min = 600000;
+static const unsigned int fvco_max = 1200000;
+
+static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+	unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
+{
+	unsigned long d, d_min, d_max, _d_min, _d_max;
+	unsigned long m, m_min, m_max;
+	unsigned long f, dout, best_f, fvco;
+
+	fin /= 1000;
+	fout /= 1000;
+
+	best_f = ULONG_MAX;
+	*best_d = 0;
+	*best_m = 0;
+	*best_dout = 0;
+
+	d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
+	d_max = min_t(unsigned long, fin / fpfd_min, 80);
+
+	m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1);
+	m_max = min_t(unsigned long, fvco_max * d_max / fin, 64);
+
+	for (m = m_min; m <= m_max; m++) {
+		_d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max));
+		_d_max = min(d_max, fin * m / fvco_min);
+
+		for (d = _d_min; d <= _d_max; d++) {
+			fvco = fin * m / d;
+
+			dout = DIV_ROUND_CLOSEST(fvco, fout);
+			dout = clamp_t(unsigned long, dout, 1, 128);
+			f = fvco / dout;
+			if (abs(f - fout) < abs(best_f - fout)) {
+				best_f = f;
+				*best_d = d;
+				*best_m = m;
+				*best_dout = dout;
+				if (best_f == fout)
+					return;
+			}
+		}
+	}
+}
+
+static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low,
+	unsigned int *high, unsigned int *edge, unsigned int *nocount)
+{
+	if (divider == 1)
+		*nocount = 1;
+	else
+		*nocount = 0;
+
+	*high = divider / 2;
+	*edge = divider % 2;
+	*low = divider - *high;
+}
+
+static void axi_clkgen_write(struct axi_clkgen *axi_clkgen,
+	unsigned int reg, unsigned int val)
+{
+	writel(val, axi_clkgen->base + reg);
+}
+
+static void axi_clkgen_read(struct axi_clkgen *axi_clkgen,
+	unsigned int reg, unsigned int *val)
+{
+	*val = readl(axi_clkgen->base + reg);
+}
+
+static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw)
+{
+	return container_of(clk_hw, struct axi_clkgen, clk_hw);
+}
+
+static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
+	unsigned long rate, unsigned long parent_rate)
+{
+	struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+	unsigned int d, m, dout;
+	unsigned int nocount;
+	unsigned int high;
+	unsigned int edge;
+	unsigned int low;
+	uint32_t filter;
+	uint32_t lock;
+
+	if (parent_rate == 0 || rate == 0)
+		return -EINVAL;
+
+	axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+
+	if (d == 0 || dout == 0 || m == 0)
+		return -EINVAL;
+
+	filter = axi_clkgen_lookup_filter(m - 1);
+	lock = axi_clkgen_lookup_lock(m - 1);
+
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0);
+
+	axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1,
+		(high << 6) | low);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2,
+		(edge << 7) | (nocount << 6));
+
+	axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV,
+		(edge << 13) | (nocount << 12) | (high << 6) | low);
+
+	axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1,
+		(high << 6) | low);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2,
+		(edge << 7) | (nocount << 6));
+
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2,
+		(((lock >> 16) & 0x1f) << 10) | 0x1);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3,
+		(((lock >> 24) & 0x1f) << 10) | 0x3e9);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter);
+
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1);
+
+	return 0;
+}
+
+static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
+	unsigned long *parent_rate)
+{
+	unsigned int d, m, dout;
+
+	axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+
+	if (d == 0 || dout == 0 || m == 0)
+		return -EINVAL;
+
+	return *parent_rate / d * m / dout;
+}
+
+static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
+	unsigned long parent_rate)
+{
+	struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+	unsigned int d, m, dout;
+	unsigned int reg;
+	unsigned long long tmp;
+
+	axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, &reg);
+	dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, &reg);
+	d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, &reg);
+	m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+	if (d == 0 || dout == 0)
+		return 0;
+
+	tmp = (unsigned long long)(parent_rate / d) * m;
+	do_div(tmp, dout);
+
+	if (tmp > ULONG_MAX)
+		return ULONG_MAX;
+
+	return tmp;
+}
+
+static const struct clk_ops axi_clkgen_ops = {
+	.recalc_rate = axi_clkgen_recalc_rate,
+	.round_rate = axi_clkgen_round_rate,
+	.set_rate = axi_clkgen_set_rate,
+};
+
+static int axi_clkgen_probe(struct platform_device *pdev)
+{
+	struct axi_clkgen *axi_clkgen;
+	struct clk_init_data init;
+	const char *parent_name;
+	const char *clk_name;
+	struct resource *mem;
+	struct clk *clk;
+
+	axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
+	if (!axi_clkgen)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(axi_clkgen->base))
+		return PTR_ERR(axi_clkgen->base);
+
+	parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
+	if (!parent_name)
+		return -EINVAL;
+
+	clk_name = pdev->dev.of_node->name;
+	of_property_read_string(pdev->dev.of_node, "clock-output-names",
+		&clk_name);
+
+	init.name = clk_name;
+	init.ops = &axi_clkgen_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	axi_clkgen->clk_hw.init = &init;
+	clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+				    clk);
+}
+
+static int axi_clkgen_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	return 0;
+}
+
+static const struct of_device_id axi_clkgen_ids[] = {
+	{ .compatible = "adi,axi-clkgen-1.00.a" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
+
+static struct platform_driver axi_clkgen_driver = {
+	.driver = {
+		.name = "adi-axi-clkgen",
+		.owner = THIS_MODULE,
+		.of_match_table = axi_clkgen_ids,
+	},
+	.probe = axi_clkgen_probe,
+	.remove = axi_clkgen_remove,
+};
+module_platform_driver(axi_clkgen_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator");

drivers/clk/clk-composite.c

+/*
+ * Copyright (c) 2013 NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+
+static u8 clk_composite_get_parent(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *mux_ops = composite->mux_ops;
+	struct clk_hw *mux_hw = composite->mux_hw;
+
+	mux_hw->clk = hw->clk;
+
+	return mux_ops->get_parent(mux_hw);
+}
+
+static int clk_composite_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *mux_ops = composite->mux_ops;
+	struct clk_hw *mux_hw = composite->mux_hw;
+
+	mux_hw->clk = hw->clk;
+
+	return mux_ops->set_parent(mux_hw, index);
+}
+
+static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *rate_ops = composite->rate_ops;
+	struct clk_hw *rate_hw = composite->rate_hw;
+
+	rate_hw->clk = hw->clk;
+
+	return rate_ops->recalc_rate(rate_hw, parent_rate);
+}
+
+static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *prate)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *rate_ops = composite->rate_ops;
+	struct clk_hw *rate_hw = composite->rate_hw;
+
+	rate_hw->clk = hw->clk;
+
+	return rate_ops->round_rate(rate_hw, rate, prate);
+}
+
+static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *rate_ops = composite->rate_ops;
+	struct clk_hw *rate_hw = composite->rate_hw;
+
+	rate_hw->clk = hw->clk;
+
+	return rate_ops->set_rate(rate_hw, rate, parent_rate);
+}
+
+static int clk_composite_is_enabled(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *gate_ops = composite->gate_ops;
+	struct clk_hw *gate_hw = composite->gate_hw;
+
+	gate_hw->clk = hw->clk;
+
+	return gate_ops->is_enabled(gate_hw);
+}
+
+static int clk_composite_enable(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *gate_ops = composite->gate_ops;
+	struct clk_hw *gate_hw = composite->gate_hw;
+
+	gate_hw->clk = hw->clk;
+
+	return gate_ops->enable(gate_hw);
+}
+
+static void clk_composite_disable(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *gate_ops = composite->gate_ops;
+	struct clk_hw *gate_hw = composite->gate_hw;
+
+	gate_hw->clk = hw->clk;
+
+	gate_ops->disable(gate_hw);
+}
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+			const char **parent_names, int num_parents,
+			struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+			struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
+			struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+			unsigned long flags)
+{
+	struct clk *clk;
+	struct clk_init_data init;
+	struct clk_composite *composite;
+	struct clk_ops *clk_composite_ops;
+
+	composite = kzalloc(sizeof(*composite), GFP_KERNEL);
+	if (!composite) {
+		pr_err("%s: could not allocate composite clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.flags = flags | CLK_IS_BASIC;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	clk_composite_ops = &composite->ops;
+
+	if (mux_hw && mux_ops) {
+		if (!mux_ops->get_parent || !mux_ops->set_parent) {
+			clk = ERR_PTR(-EINVAL);
+			goto err;
+		}
+
+		composite->mux_hw = mux_hw;
+		composite->mux_ops = mux_ops;
+		clk_composite_ops->get_parent = clk_composite_get_parent;
+		clk_composite_ops->set_parent = clk_composite_set_parent;
+	}
+
+	if (rate_hw && rate_ops) {
+		if (!rate_ops->recalc_rate) {
+			clk = ERR_PTR(-EINVAL);
+			goto err;
+		}
+
+		/* .round_rate is a prerequisite for .set_rate */
+		if (rate_ops->round_rate) {
+			clk_composite_ops->round_rate = clk_composite_round_rate;
+			if (rate_ops->set_rate) {
+				clk_composite_ops->set_rate = clk_composite_set_rate;
+			}
+		} else {
+			WARN(rate_ops->set_rate,
+				"%s: missing round_rate op is required\n",
+				__func__);
+		}
+
+		composite->rate_hw = rate_hw;
+		composite->rate_ops = rate_ops;
+		clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
+	}
+
+	if (gate_hw && gate_ops) {
+		if (!gate_ops->is_enabled || !gate_ops->enable ||
+		    !gate_ops->disable) {
+			clk = ERR_PTR(-EINVAL);
+			goto err;
+		}
+
+		composite->gate_hw = gate_hw;
+		composite->gate_ops = gate_ops;
+		clk_composite_ops->is_enabled = clk_composite_is_enabled;
+		clk_composite_ops->enable = clk_composite_enable;
+		clk_composite_ops->disable = clk_composite_disable;
+	}
+
+	init.ops = clk_composite_ops;
+	composite->hw.init = &init;
+
+	clk = clk_register(dev, &composite->hw);
+	if (IS_ERR(clk))
+		goto err;
+
+	if (composite->mux_hw)
+		composite->mux_hw->clk = clk;
+
+	if (composite->rate_hw)
+		composite->rate_hw->clk = clk;
+
+	if (composite->gate_hw)
+		composite->gate_hw->clk = clk;
+
+	return clk;
+
+err:
+	kfree(composite);
+	return clk;
+}

drivers/clk/clk-divider.c

@@ -109,7 +109,8 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 
 	div = _get_div(divider, val);
 	if (!div) {
-		WARN(1, "%s: Invalid divisor for clock %s\n", __func__,
+		WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
+			"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
 			__clk_get_name(hw->clk));
 		return parent_rate;
 	}

drivers/clk/clk-fixed-factor.c

@@ -11,6 +11,7 @@
 #include <linux/clk-provider.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/of.h>
 
 /*
  * DOC: basic fixed multiplier and divider clock that cannot gate
@@ -96,3 +97,38 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
 
 	return clk;
 }
+#ifdef CONFIG_OF
+/**
+ * of_fixed_factor_clk_setup() - Setup function for simple fixed factor clock
+ */
+void __init of_fixed_factor_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 div, mult;
+
+	if (of_property_read_u32(node, "clock-div", &div)) {
+		pr_err("%s Fixed factor clock <%s> must have a clock-div property\n",
+			__func__, node->name);
+		return;
+	}
+
+	if (of_property_read_u32(node, "clock-mult", &mult)) {
+		pr_err("%s Fixed factor clock <%s> must have a clokc-mult property\n",
+			__func__, node->name);
+		return;
+	}
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
+					mult, div);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+EXPORT_SYMBOL_GPL(of_fixed_factor_clk_setup);
+CLK_OF_DECLARE(fixed_factor_clk, "fixed-factor-clock",
+		of_fixed_factor_clk_setup);
+#endif

drivers/clk/clk-mux.c

@@ -32,6 +32,7 @@
 static u8 clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
+	int num_parents = __clk_get_num_parents(hw->clk);
 	u32 val;
 
 	/*
@@ -42,7 +43,16 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	 * val = 0x4 really means "bit 2, index starts at bit 0"
 	 */
 	val = readl(mux->reg) >> mux->shift;
-	val &= (1 << mux->width) - 1;
+	val &= mux->mask;
+
+	if (mux->table) {
+		int i;
+
+		for (i = 0; i < num_parents; i++)
+			if (mux->table[i] == val)
+				return i;
+		return -EINVAL;
+	}
 
 	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
 		val = ffs(val) - 1;
@@ -50,7 +60,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
 		val--;
 
-	if (val >= __clk_get_num_parents(hw->clk))
+	if (val >= num_parents)
 		return -EINVAL;
 
 	return val;
@@ -62,17 +72,22 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	u32 val;
 	unsigned long flags = 0;
 
+	if (mux->table)
+		index = mux->table[index];
+
+	else {
 		if (mux->flags & CLK_MUX_INDEX_BIT)
 			index = (1 << ffs(index));
 
 		if (mux->flags & CLK_MUX_INDEX_ONE)
 			index++;
+	}
 
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);
 
 	val = readl(mux->reg);
-	val &= ~(((1 << mux->width) - 1) << mux->shift);
+	val &= ~(mux->mask << mux->shift);
 	val |= index << mux->shift;
 	writel(val, mux->reg);
 
@@ -88,10 +103,10 @@ const struct clk_ops clk_mux_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
-struct clk *clk_register_mux(struct device *dev, const char *name,
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
-		void __iomem *reg, u8 shift, u8 width,
-		u8 clk_mux_flags, spinlock_t *lock)
+		void __iomem *reg, u8 shift, u32 mask,
+		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
 {
 	struct clk_mux *mux;
 	struct clk *clk;
@@ -113,9 +128,10 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 	/* struct clk_mux assignments */
 	mux->reg = reg;
 	mux->shift = shift;
-	mux->width = width;
+	mux->mask = mask;
 	mux->flags = clk_mux_flags;
 	mux->lock = lock;
+	mux->table = table;
 	mux->hw.init = &init;
 
 	clk = clk_register(dev, &mux->hw);
@@ -125,3 +141,15 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 
 	return clk;
 }
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+		const char **parent_names, u8 num_parents, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_mux_flags, spinlock_t *lock)
+{
+	u32 mask = BIT(width) - 1;
+
+	return clk_register_mux_table(dev, name, parent_names, num_parents,
+				      flags, reg, shift, mask, clk_mux_flags,
+				      NULL, lock);
+}

drivers/clk/clk-prima2.c

@@ -1113,7 +1113,7 @@ void __init sirfsoc_of_clk_init(void)
 
 	for (i = pll1; i < maxclk; i++) {
 		prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
-		BUG_ON(!prima2_clks[i]);
+		BUG_ON(IS_ERR(prima2_clks[i]));
 	}
 	clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
 	clk_register_clkdev(prima2_clks[io],  NULL, "io");

drivers/clk/clk-si5351.h

+/*
+ * clk-si5351.h: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _CLK_SI5351_H_
+#define _CLK_SI5351_H_
+
+#define SI5351_BUS_BASE_ADDR			0x60
+
+#define SI5351_PLL_VCO_MIN			600000000
+#define SI5351_PLL_VCO_MAX			900000000
+#define SI5351_MULTISYNTH_MIN_FREQ		1000000
+#define SI5351_MULTISYNTH_DIVBY4_FREQ		150000000
+#define SI5351_MULTISYNTH_MAX_FREQ		160000000
+#define SI5351_MULTISYNTH67_MAX_FREQ		SI5351_MULTISYNTH_DIVBY4_FREQ
+#define SI5351_CLKOUT_MIN_FREQ			8000
+#define SI5351_CLKOUT_MAX_FREQ			SI5351_MULTISYNTH_MAX_FREQ
+#define SI5351_CLKOUT67_MAX_FREQ		SI5351_MULTISYNTH67_MAX_FREQ
+
+#define SI5351_PLL_A_MIN			15
+#define SI5351_PLL_A_MAX			90
+#define SI5351_PLL_B_MAX			(SI5351_PLL_C_MAX-1)
+#define SI5351_PLL_C_MAX			1048575
+#define SI5351_MULTISYNTH_A_MIN			6
+#define SI5351_MULTISYNTH_A_MAX			1800
+#define SI5351_MULTISYNTH67_A_MAX		254
+#define SI5351_MULTISYNTH_B_MAX			(SI5351_MULTISYNTH_C_MAX-1)
+#define SI5351_MULTISYNTH_C_MAX			1048575
+#define SI5351_MULTISYNTH_P1_MAX		((1<<18)-1)
+#define SI5351_MULTISYNTH_P2_MAX		((1<<20)-1)
+#define SI5351_MULTISYNTH_P3_MAX		((1<<20)-1)
+
+#define SI5351_DEVICE_STATUS			0
+#define SI5351_INTERRUPT_STATUS			1
+#define SI5351_INTERRUPT_MASK			2
+#define  SI5351_STATUS_SYS_INIT			(1<<7)
+#define  SI5351_STATUS_LOL_B			(1<<6)
+#define  SI5351_STATUS_LOL_A			(1<<5)
+#define  SI5351_STATUS_LOS			(1<<4)
+#define SI5351_OUTPUT_ENABLE_CTRL		3
+#define SI5351_OEB_PIN_ENABLE_CTRL		9
+#define SI5351_PLL_INPUT_SOURCE			15
+#define  SI5351_CLKIN_DIV_MASK			(3<<6)
+#define  SI5351_CLKIN_DIV_1			(0<<6)
+#define  SI5351_CLKIN_DIV_2			(1<<6)
+#define  SI5351_CLKIN_DIV_4			(2<<6)
+#define  SI5351_CLKIN_DIV_8			(3<<6)
+#define  SI5351_PLLB_SOURCE			(1<<3)
+#define  SI5351_PLLA_SOURCE			(1<<2)
+
+#define SI5351_CLK0_CTRL			16
+#define SI5351_CLK1_CTRL			17
+#define SI5351_CLK2_CTRL			18
+#define SI5351_CLK3_CTRL			19
+#define SI5351_CLK4_CTRL			20
+#define SI5351_CLK5_CTRL			21
+#define SI5351_CLK6_CTRL			22
+#define SI5351_CLK7_CTRL			23
+#define  SI5351_CLK_POWERDOWN			(1<<7)
+#define  SI5351_CLK_INTEGER_MODE		(1<<6)
+#define  SI5351_CLK_PLL_SELECT			(1<<5)
+#define  SI5351_CLK_INVERT			(1<<4)
+#define  SI5351_CLK_INPUT_MASK			(3<<2)
+#define  SI5351_CLK_INPUT_XTAL			(0<<2)
+#define  SI5351_CLK_INPUT_CLKIN			(1<<2)
+#define  SI5351_CLK_INPUT_MULTISYNTH_0_4	(2<<2)
+#define  SI5351_CLK_INPUT_MULTISYNTH_N		(3<<2)
+#define  SI5351_CLK_DRIVE_STRENGTH_MASK		(3<<0)
+#define  SI5351_CLK_DRIVE_STRENGTH_2MA		(0<<0)
+#define  SI5351_CLK_DRIVE_STRENGTH_4MA		(1<<0)
+#define  SI5351_CLK_DRIVE_STRENGTH_6MA		(2<<0)
+#define  SI5351_CLK_DRIVE_STRENGTH_8MA		(3<<0)
+
+#define SI5351_CLK3_0_DISABLE_STATE		24
+#define SI5351_CLK7_4_DISABLE_STATE		25
+#define  SI5351_CLK_DISABLE_STATE_LOW		0
+#define  SI5351_CLK_DISABLE_STATE_HIGH		1
+#define  SI5351_CLK_DISABLE_STATE_FLOAT		2
+#define  SI5351_CLK_DISABLE_STATE_NEVER		3
+
+#define SI5351_PARAMETERS_LENGTH		8
+#define SI5351_PLLA_PARAMETERS			26
+#define SI5351_PLLB_PARAMETERS			34
+#define SI5351_CLK0_PARAMETERS			42
+#define SI5351_CLK1_PARAMETERS			50
+#define SI5351_CLK2_PARAMETERS			58
+#define SI5351_CLK3_PARAMETERS			66
+#define SI5351_CLK4_PARAMETERS			74
+#define SI5351_CLK5_PARAMETERS			82
+#define SI5351_CLK6_PARAMETERS			90
+#define SI5351_CLK7_PARAMETERS			91
+#define SI5351_CLK6_7_OUTPUT_DIVIDER		92
+#define  SI5351_OUTPUT_CLK_DIV_MASK		(7 << 4)
+#define  SI5351_OUTPUT_CLK6_DIV_MASK		(7 << 0)
+#define  SI5351_OUTPUT_CLK_DIV_SHIFT		4
+#define  SI5351_OUTPUT_CLK_DIV6_SHIFT		0
+#define  SI5351_OUTPUT_CLK_DIV_1		0
+#define  SI5351_OUTPUT_CLK_DIV_2		1
+#define  SI5351_OUTPUT_CLK_DIV_4		2
+#define  SI5351_OUTPUT_CLK_DIV_8		3
+#define  SI5351_OUTPUT_CLK_DIV_16		4
+#define  SI5351_OUTPUT_CLK_DIV_32		5
+#define  SI5351_OUTPUT_CLK_DIV_64		6
+#define  SI5351_OUTPUT_CLK_DIV_128		7
+#define  SI5351_OUTPUT_CLK_DIVBY4		(3<<2)
+
+#define SI5351_SSC_PARAM0			149
+#define SI5351_SSC_PARAM1			150
+#define SI5351_SSC_PARAM2			151
+#define SI5351_SSC_PARAM3			152
+#define SI5351_SSC_PARAM4			153
+#define SI5351_SSC_PARAM5			154
+#define SI5351_SSC_PARAM6			155
+#define SI5351_SSC_PARAM7			156
+#define SI5351_SSC_PARAM8			157
+#define SI5351_SSC_PARAM9			158
+#define SI5351_SSC_PARAM10			159
+#define SI5351_SSC_PARAM11			160
+#define SI5351_SSC_PARAM12			161
+
+#define SI5351_VXCO_PARAMETERS_LOW		162
+#define SI5351_VXCO_PARAMETERS_MID		163
+#define SI5351_VXCO_PARAMETERS_HIGH		164
+
+#define SI5351_CLK0_PHASE_OFFSET		165
+#define SI5351_CLK1_PHASE_OFFSET		166
+#define SI5351_CLK2_PHASE_OFFSET		167
+#define SI5351_CLK3_PHASE_OFFSET		168
+#define SI5351_CLK4_PHASE_OFFSET		169
+#define SI5351_CLK5_PHASE_OFFSET		170
+
+#define SI5351_PLL_RESET			177
+#define  SI5351_PLL_RESET_B			(1<<7)
+#define  SI5351_PLL_RESET_A			(1<<5)
+
+#define SI5351_CRYSTAL_LOAD			183
+#define  SI5351_CRYSTAL_LOAD_MASK		(3<<6)
+#define  SI5351_CRYSTAL_LOAD_6PF		(1<<6)
+#define  SI5351_CRYSTAL_LOAD_8PF		(2<<6)
+#define  SI5351_CRYSTAL_LOAD_10PF		(3<<6)
+
+#define SI5351_FANOUT_ENABLE			187
+#define  SI5351_CLKIN_ENABLE			(1<<7)
+#define  SI5351_XTAL_ENABLE			(1<<6)
+#define  SI5351_MULTISYNTH_ENABLE		(1<<4)
+
+#endif

drivers/clk/clk-vt8500.c

@@ -488,6 +488,7 @@ static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	case PLL_TYPE_WM8750:
 		wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2);
 		pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
+		break;
 	default:
 		pr_err("%s: invalid pll type\n", __func__);
 		return 0;
@@ -523,6 +524,7 @@ static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 	case PLL_TYPE_WM8750:
 		wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
 		round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
+		break;
 	default:
 		round_rate = 0;
 	}

drivers/clk/clk-zynq.c

@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/zynq.h>
 
 static void __iomem *slcr_base;
 

drivers/clk/mvebu/clk-core.c

@@ -156,7 +156,7 @@ static u32 __init armada_370_get_cpu_freq(void __iomem *sar)
 
 	cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) &
 			   SARL_A370_PCLK_FREQ_OPT_MASK);
-	if (cpu_freq_select > ARRAY_SIZE(armada_370_cpu_frequencies)) {
+	if (cpu_freq_select >= ARRAY_SIZE(armada_370_cpu_frequencies)) {
 		pr_err("CPU freq select unsuported %d\n", cpu_freq_select);
 		cpu_freq = 0;
 	} else
@@ -278,7 +278,7 @@ static u32 __init armada_xp_get_cpu_freq(void __iomem *sar)
 	cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) &
 			     SARH_AXP_PCLK_FREQ_OPT_MASK)
 			    << SARH_AXP_PCLK_FREQ_OPT_SHIFT);
-	if (cpu_freq_select > ARRAY_SIZE(armada_xp_cpu_frequencies)) {
+	if (cpu_freq_select >= ARRAY_SIZE(armada_xp_cpu_frequencies)) {
 		pr_err("CPU freq select unsuported: %d\n", cpu_freq_select);
 		cpu_freq = 0;
 	} else

drivers/clk/mvebu/clk-cpu.c

@@ -16,7 +16,6 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/delay.h>
-#include "clk-cpu.h"
 
 #define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET    0x0
 #define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET   0xC
@@ -173,17 +172,5 @@ void __init of_cpu_clk_setup(struct device_node *node)
 	kfree(cpuclk);
 }
 
-static const __initconst struct of_device_id clk_cpu_match[] = {
-	{
-		.compatible = "marvell,armada-xp-cpu-clock",
-		.data = of_cpu_clk_setup,
-	},
-	{
-		/* sentinel */
-	},
-};
-
-void __init mvebu_cpu_clk_init(void)
-{
-	of_clk_init(clk_cpu_match);
-}
+CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
+					 of_cpu_clk_setup);

drivers/clk/mvebu/clk-cpu.h

-/*
- * Marvell MVEBU CPU clock handling.
- *
- * Copyright (C) 2012 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MVEBU_CLK_CPU_H
-#define __MVEBU_CLK_CPU_H
-
-#ifdef CONFIG_MVEBU_CLK_CPU
-void __init mvebu_cpu_clk_init(void);
-#else
-static inline void mvebu_cpu_clk_init(void) {}
-#endif
-
-#endif

drivers/clk/mvebu/clk.c

@@ -10,18 +10,14 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/clk/mvebu.h>
 #include <linux/of.h>
 #include "clk-core.h"
-#include "clk-cpu.h"
 #include "clk-gating-ctrl.h"
 
 void __init mvebu_clocks_init(void)
 {
 	mvebu_core_clk_init();
 	mvebu_gating_clk_init();
-	mvebu_cpu_clk_init();
+	of_clk_init(NULL);
 }

drivers/clk/mxs/clk.c

@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/spinlock.h>
+#include "clk.h"
 
 DEFINE_SPINLOCK(mxs_lock);
 

drivers/clk/spear/spear1340_clock.c

@@ -960,47 +960,47 @@ void __init spear1340_clk_init(void)
 			SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "d0100000.spdif-in");
 
-	clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
+	clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "acp_clk");
 
-	clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
+	clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "e2800000.gpio");
 
-	clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
+	clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "video_dec");
 
-	clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
+	clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "video_enc");
 
-	clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
+	clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "spear_vip");
 
-	clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
+	clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0200000.cam0");
 
-	clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
+	clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0300000.cam1");
 
-	clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
+	clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0400000.cam2");
 
-	clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
+	clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0500000.cam3");

drivers/clk/sunxi/Makefile

+#
+# Makefile for sunxi specific clk
+#
+
+obj-y += clk-sunxi.o clk-factors.o

drivers/clk/sunxi/clk-factors.c

+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <linux/delay.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ *        clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+struct clk_factors {
+	struct clk_hw hw;
+	void __iomem *reg;
+	struct clk_factors_config *config;
+	void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+	spinlock_t *lock;
+};
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define SETMASK(len, pos)		(((-1U) >> (31-len))  << (pos))
+#define CLRMASK(len, pos)		(~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg)	(((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+	(((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	u8 n = 1, k = 0, p = 0, m = 0;
+	u32 reg;
+	unsigned long rate;
+	struct clk_factors *factors = to_clk_factors(hw);
+	struct clk_factors_config *config = factors->config;
+
+	/* Fetch the register value */
+	reg = readl(factors->reg);
+
+	/* Get each individual factor if applicable */
+	if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		n = FACTOR_GET(config->nshift, config->nwidth, reg);
+	if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		k = FACTOR_GET(config->kshift, config->kwidth, reg);
+	if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		m = FACTOR_GET(config->mshift, config->mwidth, reg);
+	if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+	/* Calculate the rate */
+	rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+
+	return rate;
+}
+
+static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct clk_factors *factors = to_clk_factors(hw);
+	factors->get_factors((u32 *)&rate, (u32)*parent_rate,
+			     NULL, NULL, NULL, NULL);
+
+	return rate;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	u8 n, k, m, p;
+	u32 reg;
+	struct clk_factors *factors = to_clk_factors(hw);
+	struct clk_factors_config *config = factors->config;
+	unsigned long flags = 0;
+
+	factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+
+	if (factors->lock)
+		spin_lock_irqsave(factors->lock, flags);
+
+	/* Fetch the register value */
+	reg = readl(factors->reg);
+
+	/* Set up the new factors - macros do not do anything if width is 0 */
+	reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
+	reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
+	reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
+	reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+
+	/* Apply them now */
+	writel(reg, factors->reg);
+
+	/* delay 500us so pll stabilizes */
+	__delay((rate >> 20) * 500 / 2);
+
+	if (factors->lock)
+		spin_unlock_irqrestore(factors->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+	.recalc_rate = clk_factors_recalc_rate,
+	.round_rate = clk_factors_round_rate,
+	.set_rate = clk_factors_set_rate,
+};
+
+/**
+ * clk_register_factors - register a factors clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust factors
+ * @config: shift and width of factors n, k, m and p
+ * @get_factors: function to calculate the factors for a given frequency
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_factors(struct device *dev, const char *name,
+				 const char *parent_name,
+				 unsigned long flags, void __iomem *reg,
+				 struct clk_factors_config *config,
+				 void (*get_factors)(u32 *rate, u32 parent,
+						     u8 *n, u8 *k, u8 *m, u8 *p),
+				 spinlock_t *lock)
+{
+	struct clk_factors *factors;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the factors */
+	factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+	if (!factors) {
+		pr_err("%s: could not allocate factors clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &clk_factors_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_factors assignments */
+	factors->reg = reg;
+	factors->config = config;
+	factors->lock = lock;
+	factors->hw.init = &init;
+	factors->get_factors = get_factors;
+
+	/* register the clock */
+	clk = clk_register(dev, &factors->hw);
+
+	if (IS_ERR(clk))
+		kfree(factors);
+
+	return clk;
+}

drivers/clk/sunxi/clk-factors.h

+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE	(0)
+
+struct clk_factors_config {
+	u8 nshift;
+	u8 nwidth;
+	u8 kshift;
+	u8 kwidth;
+	u8 mshift;
+	u8 mwidth;
+	u8 pshift;
+	u8 pwidth;
+};
+
+struct clk *clk_register_factors(struct device *dev, const char *name,
+				 const char *parent_name,
+				 unsigned long flags, void __iomem *reg,
+				 struct clk_factors_config *config,
+				 void (*get_factors) (u32 *rate, u32 parent_rate,
+						      u8 *n, u8 *k, u8 *m, u8 *p),
+				 spinlock_t *lock);
+#endif

drivers/clk/tegra/clk.h

@@ -355,15 +355,16 @@ struct clk *tegra_clk_register_periph_nodiv(const char *name,
 		struct tegra_clk_periph *periph, void __iomem *clk_base,
 		u32 offset);
 
-#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags,		\
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags,		\
 			 _div_shift, _div_width, _div_frac_width,	\
 			 _div_flags, _clk_num, _enb_refcnt, _regs,	\
-			 _gate_flags)					\
+			 _gate_flags, _table)				\
 	{								\
 		.mux = {						\
 			.flags = _mux_flags,				\
 			.shift = _mux_shift,				\
-			.width = _mux_width,				\
+			.mask = _mux_mask,				\
+			.table = _table,				\
 		},							\
 		.divider = {						\
 			.flags = _div_flags,				\
@@ -393,26 +394,36 @@ struct tegra_periph_init_data {
 	const char *dev_id;
 };
 
-#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
-			_mux_shift, _mux_width, _mux_flags, _div_shift,	\
+#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+			_mux_shift, _mux_mask, _mux_flags, _div_shift,	\
 			_div_width, _div_frac_width, _div_flags, _regs,	\
-			_clk_num, _enb_refcnt, _gate_flags, _clk_id)	\
+			_clk_num, _enb_refcnt, _gate_flags, _clk_id, _table) \
 	{								\
 		.name = _name,						\
 		.clk_id = _clk_id,					\
 		.parent_names = _parent_names,				\
 		.num_parents = ARRAY_SIZE(_parent_names),		\
-		.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width,	\
+		.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask,	\
 					   _mux_flags, _div_shift,	\
 					   _div_width, _div_frac_width,	\
 					   _div_flags, _clk_num,	\
 					   _enb_refcnt, _regs,		\
-					   _gate_flags),		\
+					   _gate_flags, _table),	\
 		.offset = _offset,					\
 		.con_id = _con_id,					\
 		.dev_id = _dev_id,					\
 	}
 
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
+			_mux_shift, _mux_width, _mux_flags, _div_shift,	\
+			_div_width, _div_frac_width, _div_flags, _regs,	\
+			_clk_num, _enb_refcnt, _gate_flags, _clk_id)	\
+	TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+			_mux_shift, BIT(_mux_width) - 1, _mux_flags,	\
+			_div_shift, _div_width, _div_frac_width, _div_flags, \
+			_regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
+			NULL)
+
 /**
  * struct clk_super_mux - super clock
  *

drivers/clk/ux500/Makefile

@@ -5,6 +5,7 @@
 # Clock types
 obj-y += clk-prcc.o
 obj-y += clk-prcmu.o
+obj-y += clk-sysctrl.o
 
 # Clock definitions
 obj-y += u8500_clk.o

drivers/clk/ux500/abx500-clk.c

@@ -12,13 +12,78 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/abx500/ab8500.h>
-
-/* TODO: Add clock implementations here */
-
+#include <linux/mfd/abx500/ab8500-sysctrl.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include "clk.h"
 
 /* Clock definitions for ab8500 */
 static int ab8500_reg_clks(struct device *dev)
 {
+	int ret;
+	struct clk *clk;
+
+	const char *intclk_parents[] = {"ab8500_sysclk", "ulpclk"};
+	u16 intclk_reg_sel[] = {0 , AB8500_SYSULPCLKCTRL1};
+	u8 intclk_reg_mask[] = {0 , AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK};
+	u8 intclk_reg_bits[] = {
+		0 ,
+		(1 << AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT)
+	};
+
+	dev_info(dev, "register clocks for ab850x\n");
+
+	/* Enable SWAT */
+	ret = ab8500_sysctrl_set(AB8500_SWATCTRL, AB8500_SWATCTRL_SWATENABLE);
+	if (ret)
+		return ret;
+
+	/* ab8500_sysclk */
+	clk = clk_reg_prcmu_gate("ab8500_sysclk", NULL, PRCMU_SYSCLK,
+				CLK_IS_ROOT);
+	clk_register_clkdev(clk, "sysclk", "ab8500-usb.0");
+	clk_register_clkdev(clk, "sysclk", "ab-iddet.0");
+	clk_register_clkdev(clk, "sysclk", "ab85xx-codec.0");
+	clk_register_clkdev(clk, "sysclk", "shrm_bus");
+
+	/* ab8500_sysclk2 */
+	clk = clk_reg_sysctrl_gate(dev , "ab8500_sysclk2", "ab8500_sysclk",
+		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ,
+		AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ, 0, 0);
+	clk_register_clkdev(clk, "sysclk", "0-0070");
+
+	/* ab8500_sysclk3 */
+	clk = clk_reg_sysctrl_gate(dev , "ab8500_sysclk3", "ab8500_sysclk",
+		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ,
+		AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ, 0, 0);
+	clk_register_clkdev(clk, "sysclk", "cg1960_core.0");
+
+	/* ab8500_sysclk4 */
+	clk = clk_reg_sysctrl_gate(dev , "ab8500_sysclk4", "ab8500_sysclk",
+		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ,
+		AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ, 0, 0);
+
+	/* ab_ulpclk */
+	clk = clk_reg_sysctrl_gate_fixed_rate(dev, "ulpclk", NULL,
+		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_ULPCLKREQ,
+		AB8500_SYSULPCLKCTRL1_ULPCLKREQ,
+		38400000, 9000, CLK_IS_ROOT);
+	clk_register_clkdev(clk, "ulpclk", "ab85xx-codec.0");
+
+	/* ab8500_intclk */
+	clk = clk_reg_sysctrl_set_parent(dev , "intclk", intclk_parents, 2,
+		intclk_reg_sel, intclk_reg_mask, intclk_reg_bits, 0);
+	clk_register_clkdev(clk, "intclk", "ab85xx-codec.0");
+	clk_register_clkdev(clk, NULL, "ab8500-pwm.1");
+
+	/* ab8500_audioclk */
+	clk = clk_reg_sysctrl_gate(dev , "audioclk", "intclk",
+		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_AUDIOCLKENA,
+		AB8500_SYSULPCLKCTRL1_AUDIOCLKENA, 0, 0);
+	clk_register_clkdev(clk, "audioclk", "ab85xx-codec.0");
+
 	return 0;
 }
 

drivers/clk/ux500/clk-prcmu.c

@@ -20,15 +20,23 @@
 struct clk_prcmu {
 	struct clk_hw hw;
 	u8 cg_sel;
+	int is_prepared;
 	int is_enabled;
+	int opp_requested;
 };
 
 /* PRCMU clock operations. */
 
 static int clk_prcmu_prepare(struct clk_hw *hw)
 {
+	int ret;
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
-	return prcmu_request_clock(clk->cg_sel, true);
+
+	ret = prcmu_request_clock(clk->cg_sel, true);
+	if (!ret)
+		clk->is_prepared = 1;
+
+	return ret;;
 }
 
 static void clk_prcmu_unprepare(struct clk_hw *hw)
@@ -36,7 +44,15 @@ static void clk_prcmu_unprepare(struct clk_hw *hw)
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 	if (prcmu_request_clock(clk->cg_sel, false))
 		pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
-			hw->init->name);
+			__clk_get_name(hw->clk));
+	else
+		clk->is_prepared = 0;
+}
+
+static int clk_prcmu_is_prepared(struct clk_hw *hw)
+{
+	struct clk_prcmu *clk = to_clk_prcmu(hw);
+	return clk->is_prepared;
 }
 
 static int clk_prcmu_enable(struct clk_hw *hw)
@@ -79,58 +95,52 @@ static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate,
 	return prcmu_set_clock_rate(clk->cg_sel, rate);
 }
 
-static int request_ape_opp100(bool enable)
-{
-	static int reqs;
-	int err = 0;
-
-	if (enable) {
-		if (!reqs)
-			err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
-							"clock", 100);
-		if (!err)
-			reqs++;
-	} else {
-		reqs--;
-		if (!reqs)
-			prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
-						"clock");
-	}
-	return err;
-}
-
 static int clk_prcmu_opp_prepare(struct clk_hw *hw)
 {
 	int err;
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	err = request_ape_opp100(true);
+	if (!clk->opp_requested) {
+		err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+						(char *)__clk_get_name(hw->clk),
+						100);
 		if (err) {
-		pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
-			__func__, hw->init->name);
+			pr_err("clk_prcmu: %s fail req APE OPP for %s.\n",
+				__func__, __clk_get_name(hw->clk));
 			return err;
 		}
+		clk->opp_requested = 1;
+	}
 
 	err = prcmu_request_clock(clk->cg_sel, true);
-	if (err)
-		request_ape_opp100(false);
-
+	if (err) {
+		prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+					(char *)__clk_get_name(hw->clk));
+		clk->opp_requested = 0;
 		return err;
+	}
+
+	clk->is_prepared = 1;
+	return 0;
 }
 
 static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
 {
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	if (prcmu_request_clock(clk->cg_sel, false))
-		goto out_error;
-	if (request_ape_opp100(false))
-		goto out_error;
+	if (prcmu_request_clock(clk->cg_sel, false)) {
+		pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+			__clk_get_name(hw->clk));
 		return;
+	}
 
-out_error:
-	pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
-		hw->init->name);
+	if (clk->opp_requested) {
+		prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+					(char *)__clk_get_name(hw->clk));
+		clk->opp_requested = 0;
+	}
+
+	clk->is_prepared = 0;
 }
 
 static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
@@ -138,38 +148,49 @@ static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
 	int err;
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
+	if (!clk->opp_requested) {
 		err = prcmu_request_ape_opp_100_voltage(true);
 		if (err) {
-		pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
-			__func__, hw->init->name);
+			pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n",
+				__func__, __clk_get_name(hw->clk));
 			return err;
 		}
+		clk->opp_requested = 1;
+	}
 
 	err = prcmu_request_clock(clk->cg_sel, true);
-	if (err)
+	if (err) {
 		prcmu_request_ape_opp_100_voltage(false);
-
+		clk->opp_requested = 0;
 		return err;
+	}
+
+	clk->is_prepared = 1;
+	return 0;
 }
 
 static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
 {
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	if (prcmu_request_clock(clk->cg_sel, false))
-		goto out_error;
-	if (prcmu_request_ape_opp_100_voltage(false))
-		goto out_error;
+	if (prcmu_request_clock(clk->cg_sel, false)) {
+		pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+			__clk_get_name(hw->clk));
 		return;
+	}
 
-out_error:
-	pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
-		hw->init->name);
+	if (clk->opp_requested) {
+		prcmu_request_ape_opp_100_voltage(false);
+		clk->opp_requested = 0;
+	}
+
+	clk->is_prepared = 0;
 }
 
 static struct clk_ops clk_prcmu_scalable_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -181,6 +202,7 @@ static struct clk_ops clk_prcmu_scalable_ops = {
 static struct clk_ops clk_prcmu_gate_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -202,6 +224,7 @@ static struct clk_ops clk_prcmu_rate_ops = {
 static struct clk_ops clk_prcmu_opp_gate_ops = {
 	.prepare = clk_prcmu_opp_prepare,
 	.unprepare = clk_prcmu_opp_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -211,6 +234,7 @@ static struct clk_ops clk_prcmu_opp_gate_ops = {
 static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
 	.prepare = clk_prcmu_opp_volt_prepare,
 	.unprepare = clk_prcmu_opp_volt_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -242,7 +266,9 @@ static struct clk *clk_reg_prcmu(const char *name,
 	}
 
 	clk->cg_sel = cg_sel;
+	clk->is_prepared = 1;
 	clk->is_enabled = 1;
+	clk->opp_requested = 0;
 	/* "rate" can be used for changing the initial frequency */
 	if (rate)
 		prcmu_set_clock_rate(cg_sel, rate);

drivers/clk/ux500/clk-sysctrl.c

+/*
+ * Sysctrl clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2013 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/abx500/ab8500-sysctrl.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define SYSCTRL_MAX_NUM_PARENTS 4
+
+#define to_clk_sysctrl(_hw) container_of(_hw, struct clk_sysctrl, hw)
+
+struct clk_sysctrl {
+	struct clk_hw hw;
+	struct device *dev;
+	u8 parent_index;
+	u16 reg_sel[SYSCTRL_MAX_NUM_PARENTS];
+	u8 reg_mask[SYSCTRL_MAX_NUM_PARENTS];
+	u8 reg_bits[SYSCTRL_MAX_NUM_PARENTS];
+	unsigned long rate;
+	unsigned long enable_delay_us;
+};
+
+/* Sysctrl clock operations. */
+
+static int clk_sysctrl_prepare(struct clk_hw *hw)
+{
+	int ret;
+	struct clk_sysctrl *clk = to_clk_sysctrl(hw);
+
+	ret = ab8500_sysctrl_write(clk->reg_sel[0], clk->reg_mask[0],
+				clk->reg_bits[0]);
+
+	if (!ret && clk->enable_delay_us)
+		usleep_range(clk->enable_delay_us, clk->enable_delay_us);
+
+	return ret;
+}
+
+static void clk_sysctrl_unprepare(struct clk_hw *hw)
+{
+	struct clk_sysctrl *clk = to_clk_sysctrl(hw);
+	if (ab8500_sysctrl_clear(clk->reg_sel[0], clk->reg_mask[0]))
+		dev_err(clk->dev, "clk_sysctrl: %s fail to clear %s.\n",
+			__func__, __clk_get_name(hw->clk));
+}
+
+static unsigned long clk_sysctrl_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk_sysctrl *clk = to_clk_sysctrl(hw);
+	return clk->rate;
+}
+
+static int clk_sysctrl_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_sysctrl *clk = to_clk_sysctrl(hw);
+	u8 old_index = clk->parent_index;
+	int ret = 0;
+
+	if (clk->reg_sel[old_index]) {
+		ret = ab8500_sysctrl_clear(clk->reg_sel[old_index],
+					clk->reg_mask[old_index]);
+		if (ret)
+			return ret;
+	}
+
+	if (clk->reg_sel[index]) {
+		ret = ab8500_sysctrl_write(clk->reg_sel[index],
+					clk->reg_mask[index],
+					clk->reg_bits[index]);
+		if (ret) {
+			if (clk->reg_sel[old_index])
+				ab8500_sysctrl_write(clk->reg_sel[old_index],
+						clk->reg_mask[old_index],
+						clk->reg_bits[old_index]);
+			return ret;
+		}
+	}
+	clk->parent_index = index;
+
+	return ret;
+}
+
+static u8 clk_sysctrl_get_parent(struct clk_hw *hw)
+{
+	struct clk_sysctrl *clk = to_clk_sysctrl(hw);
+	return clk->parent_index;
+}
+
+static struct clk_ops clk_sysctrl_gate_ops = {
+	.prepare = clk_sysctrl_prepare,
+	.unprepare = clk_sysctrl_unprepare,
+};
+
+static struct clk_ops clk_sysctrl_gate_fixed_rate_ops = {
+	.prepare = clk_sysctrl_prepare,
+	.unprepare = clk_sysctrl_unprepare,
+	.recalc_rate = clk_sysctrl_recalc_rate,
+};
+
+static struct clk_ops clk_sysctrl_set_parent_ops = {
+	.set_parent = clk_sysctrl_set_parent,
+	.get_parent = clk_sysctrl_get_parent,
+};
+
+static struct clk *clk_reg_sysctrl(struct device *dev,
+				const char *name,
+				const char **parent_names,
+				u8 num_parents,
+				u16 *reg_sel,
+				u8 *reg_mask,
+				u8 *reg_bits,
+				unsigned long rate,
+				unsigned long enable_delay_us,
+				unsigned long flags,
+				struct clk_ops *clk_sysctrl_ops)
+{
+	struct clk_sysctrl *clk;
+	struct clk_init_data clk_sysctrl_init;
+	struct clk *clk_reg;
+	int i;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	if (!name || (num_parents > SYSCTRL_MAX_NUM_PARENTS)) {
+		dev_err(dev, "clk_sysctrl: invalid arguments passed\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	clk = devm_kzalloc(dev, sizeof(struct clk_sysctrl), GFP_KERNEL);
+	if (!clk) {
+		dev_err(dev, "clk_sysctrl: could not allocate clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	for (i = 0; i < num_parents; i++) {
+		clk->reg_sel[i] = reg_sel[i];
+		clk->reg_bits[i] = reg_bits[i];
+		clk->reg_mask[i] = reg_mask[i];
+	}
+
+	clk->parent_index = 0;
+	clk->rate = rate;
+	clk->enable_delay_us = enable_delay_us;
+	clk->dev = dev;
+
+	clk_sysctrl_init.name = name;
+	clk_sysctrl_init.ops = clk_sysctrl_ops;
+	clk_sysctrl_init.flags = flags;
+	clk_sysctrl_init.parent_names = parent_names;
+	clk_sysctrl_init.num_parents = num_parents;
+	clk->hw.init = &clk_sysctrl_init;
+
+	clk_reg = devm_clk_register(clk->dev, &clk->hw);
+	if (IS_ERR(clk_reg))
+		dev_err(dev, "clk_sysctrl: clk_register failed\n");
+
+	return clk_reg;
+}
+
+struct clk *clk_reg_sysctrl_gate(struct device *dev,
+				const char *name,
+				const char *parent_name,
+				u16 reg_sel,
+				u8 reg_mask,
+				u8 reg_bits,
+				unsigned long enable_delay_us,
+				unsigned long flags)
+{
+	const char **parent_names = (parent_name ? &parent_name : NULL);
+	u8 num_parents = (parent_name ? 1 : 0);
+
+	return clk_reg_sysctrl(dev, name, parent_names, num_parents,
+			&reg_sel, &reg_mask, &reg_bits, 0, enable_delay_us,
+			flags, &clk_sysctrl_gate_ops);
+}
+
+struct clk *clk_reg_sysctrl_gate_fixed_rate(struct device *dev,
+					const char *name,
+					const char *parent_name,
+					u16 reg_sel,
+					u8 reg_mask,
+					u8 reg_bits,
+					unsigned long rate,
+					unsigned long enable_delay_us,
+					unsigned long flags)
+{
+	const char **parent_names = (parent_name ? &parent_name : NULL);
+	u8 num_parents = (parent_name ? 1 : 0);
+
+	return clk_reg_sysctrl(dev, name, parent_names, num_parents,
+			&reg_sel, &reg_mask, &reg_bits,
+			rate, enable_delay_us, flags,
+			&clk_sysctrl_gate_fixed_rate_ops);
+}
+
+struct clk *clk_reg_sysctrl_set_parent(struct device *dev,
+				const char *name,
+				const char **parent_names,
+				u8 num_parents,
+				u16 *reg_sel,
+				u8 *reg_mask,
+				u8 *reg_bits,
+				unsigned long flags)
+{
+	return clk_reg_sysctrl(dev, name, parent_names, num_parents,
+			reg_sel, reg_mask, reg_bits, 0, 0, flags,
+			&clk_sysctrl_set_parent_ops);
+}

drivers/clk/versatile/Makefile

@@ -3,5 +3,5 @@ obj-$(CONFIG_ICST)		+= clk-icst.o
 obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)	+= clk-impd1.o
 obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
-obj-$(CONFIG_ARCH_VEXPRESS)	+= clk-vexpress.o
+obj-$(CONFIG_ARCH_VEXPRESS)	+= clk-vexpress.o clk-sp810.o
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= clk-vexpress-osc.o