Commit 36b2f61a authored by Govindarajulu Varadarajan's avatar Govindarajulu Varadarajan Committed by David S. Miller

net: handle 802.1P vlan 0 packets properly

When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4],
vlan_do_receive() returns false if it does not find vlan_dev. Later
__netif_receive_skb_core() fails to find packet type handler for
skb->protocol 801.1AD and drops the packet.

801.1P header with vlan id 0 should be handled as untagged packets.
This patch fixes it by checking if vlan_id is 0 and processes next vlan
header.
Signed-off-by: default avatarGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1eb4169c
...@@ -4923,8 +4923,36 @@ static int __netif_receive_skb_core(struct sk_buff *skb, bool pfmemalloc, ...@@ -4923,8 +4923,36 @@ static int __netif_receive_skb_core(struct sk_buff *skb, bool pfmemalloc,
} }
if (unlikely(skb_vlan_tag_present(skb))) { if (unlikely(skb_vlan_tag_present(skb))) {
if (skb_vlan_tag_get_id(skb)) check_vlan_id:
if (skb_vlan_tag_get_id(skb)) {
/* Vlan id is non 0 and vlan_do_receive() above couldn't
* find vlan device.
*/
skb->pkt_type = PACKET_OTHERHOST; skb->pkt_type = PACKET_OTHERHOST;
} else if (skb->protocol == cpu_to_be16(ETH_P_8021Q) ||
skb->protocol == cpu_to_be16(ETH_P_8021AD)) {
/* Outer header is 802.1P with vlan 0, inner header is
* 802.1Q or 802.1AD and vlan_do_receive() above could
* not find vlan dev for vlan id 0.
*/
__vlan_hwaccel_clear_tag(skb);
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
if (vlan_do_receive(&skb))
/* After stripping off 802.1P header with vlan 0
* vlan dev is found for inner header.
*/
goto another_round;
else if (unlikely(!skb))
goto out;
else
/* We have stripped outer 802.1P vlan 0 header.
* But could not find vlan dev.
* check again for vlan id to set OTHERHOST.
*/
goto check_vlan_id;
}
/* Note: we might in the future use prio bits /* Note: we might in the future use prio bits
* and set skb->priority like in vlan_do_receive() * and set skb->priority like in vlan_do_receive()
* For the time being, just ignore Priority Code Point * For the time being, just ignore Priority Code Point
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment