Commit 3723c632 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Linus Torvalds

treewide: convert ISO_8859-1 text comments to utf-8

Almost all files in the kernel are either plain text or UTF-8 encoded.  A
couple however are ISO_8859-1, usually just a few characters in a C
comments, for historic reasons.

This converts them all to UTF-8 for consistency.

Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.deSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms@verge.net.au>			[IPVS portion]
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>	[IIO]
Acked-by: Michael Ellerman <mpe@ellerman.id.au>			[powerpc]
Acked-by: default avatarRob Herring <robh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 0edf6813
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
Required properties: Required properties:
- compatible: Should be "nxp,pn544-i2c". - compatible: Should be "nxp,pn544-i2c".
- clock-frequency: IC work frequency. - clock-frequency: I²C work frequency.
- reg: address on the bus - reg: address on the bus
- interrupts: GPIO interrupt to which the chip is connected - interrupts: GPIO interrupt to which the chip is connected
- enable-gpios: Output GPIO pin used for enabling/disabling the PN544 - enable-gpios: Output GPIO pin used for enabling/disabling the PN544
......
/* /*
* Copyright 2014 Open Source Support GmbH * Copyright 2014 Open Source Support GmbH
* *
* David Lanzendrfer <david.lanzendoerfer@o2s.ch> * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
* *
* This file is dual-licensed: you can use it either under the terms * This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual * of the GPL or the X11 license, at your option. Note that this dual
......
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* Glue code for the SHA256 Secure Hash Algorithm assembly implementation * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
* using optimized ARM assembler and NEON instructions. * using optimized ARM assembler and NEON instructions.
* *
* Copyright 2015 Google Inc. * Copyright © 2015 Google Inc.
* *
* This file is based on sha256_ssse3_glue.c: * This file is based on sha256_ssse3_glue.c:
* Copyright (C) 2013 Intel Corporation * Copyright (C) 2013 Intel Corporation
......
...@@ -2,10 +2,10 @@ ...@@ -2,10 +2,10 @@
* Glue code for the SHA256 Secure Hash Algorithm assembly implementation * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
* using NEON instructions. * using NEON instructions.
* *
* Copyright 2015 Google Inc. * Copyright © 2015 Google Inc.
* *
* This file is based on sha512_neon_glue.c: * This file is based on sha512_neon_glue.c:
* Copyright 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free * under the terms of the GNU General Public License as published by the Free
......
...@@ -129,9 +129,9 @@ $code=<<___; ...@@ -129,9 +129,9 @@ $code=<<___;
le?vperm $IN,$IN,$IN,$lemask le?vperm $IN,$IN,$IN,$lemask
vxor $zero,$zero,$zero vxor $zero,$zero,$zero
vpmsumd $Xl,$IN,$Hl # H.loXi.lo vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo
vpmsumd $Xm,$IN,$H # H.hiXi.lo+H.loXi.hi vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi
vpmsumd $Xh,$IN,$Hh # H.hiXi.hi vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi
vpmsumd $t2,$Xl,$xC2 # 1st phase vpmsumd $t2,$Xl,$xC2 # 1st phase
...@@ -187,11 +187,11 @@ $code=<<___; ...@@ -187,11 +187,11 @@ $code=<<___;
.align 5 .align 5
Loop: Loop:
subic $len,$len,16 subic $len,$len,16
vpmsumd $Xl,$IN,$Hl # H.loXi.lo vpmsumd $Xl,$IN,$Hl # H.lo·Xi.lo
subfe. r0,r0,r0 # borrow?-1:0 subfe. r0,r0,r0 # borrow?-1:0
vpmsumd $Xm,$IN,$H # H.hiXi.lo+H.loXi.hi vpmsumd $Xm,$IN,$H # H.hi·Xi.lo+H.lo·Xi.hi
and r0,r0,$len and r0,r0,$len
vpmsumd $Xh,$IN,$Hh # H.hiXi.hi vpmsumd $Xh,$IN,$Hh # H.hi·Xi.hi
add $inp,$inp,r0 add $inp,$inp,r0
vpmsumd $t2,$Xl,$xC2 # 1st phase vpmsumd $t2,$Xl,$xC2 # 1st phase
......
/* /*
* LTC2632 Digital to analog convertors spi driver * LTC2632 Digital to analog convertors spi driver
* *
* Copyright 2017 Maxime Roussin-Blanger * Copyright 2017 Maxime Roussin-Bélanger
* expanded by Silvan Murer <silvan.murer@gmail.com> * expanded by Silvan Murer <silvan.murer@gmail.com>
* *
* Licensed under the GPL-2. * Licensed under the GPL-2.
......
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
* LTC2952 (PowerPath) driver * LTC2952 (PowerPath) driver
* *
* Copyright (C) 2014, Xsens Technologies BV <info@xsens.com> * Copyright (C) 2014, Xsens Technologies BV <info@xsens.com>
* Maintainer: Ren Moll <linux@r-moll.nl> * Maintainer: René Moll <linux@r-moll.nl>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
...@@ -319,6 +319,6 @@ static struct platform_driver ltc2952_poweroff_driver = { ...@@ -319,6 +319,6 @@ static struct platform_driver ltc2952_poweroff_driver = {
module_platform_driver(ltc2952_poweroff_driver); module_platform_driver(ltc2952_poweroff_driver);
MODULE_AUTHOR("Ren Moll <rene.moll@xsens.com>"); MODULE_AUTHOR("René Moll <rene.moll@xsens.com>");
MODULE_DESCRIPTION("LTC PowerPath power-off driver"); MODULE_DESCRIPTION("LTC PowerPath power-off driver");
MODULE_LICENSE("GPL v2"); MODULE_LICENSE("GPL v2");
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
* Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de> * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
* Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar
* Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra
* Copyright 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com> * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
* *
* For licensing details see kernel-base/COPYING * For licensing details see kernel-base/COPYING
*/ */
......
...@@ -296,10 +296,10 @@ config IP_VS_MH_TAB_INDEX ...@@ -296,10 +296,10 @@ config IP_VS_MH_TAB_INDEX
stored in a hash table. This table is assigned by a preference stored in a hash table. This table is assigned by a preference
list of the positions to each destination until all slots in list of the positions to each destination until all slots in
the table are filled. The index determines the prime for size of the table are filled. The index determines the prime for size of
the table as 251, 509, 1021, 2039, 4093, 8191, 16381, 32749, the table as 251, 509, 1021, 2039, 4093, 8191, 16381, 32749,
65521 or 131071. When using weights to allow destinations to 65521 or 131071. When using weights to allow destinations to
receive more connections, the table is assigned an amount receive more connections, the table is assigned an amount
proportional to the weights specified. The table needs to be large proportional to the weights specified. The table needs to be large
enough to effectively fit all the destinations multiplied by their enough to effectively fit all the destinations multiplied by their
respective weights. respective weights.
......
...@@ -5,10 +5,10 @@ ...@@ -5,10 +5,10 @@
* *
*/ */
/* The mh algorithm is to assigna preference list of all the lookup /* The mh algorithm is to assign a preference list of all the lookup
* table positions to each destination and populate the table with * table positions to each destination and populate the table with
* the most-preferred position of destinations. Then it is to select * the most-preferred position of destinations. Then it is to select
* destination with the hash key of source IP addressthrough looking * destination with the hash key of source IP address through looking
* up a the lookup table. * up a the lookup table.
* *
* The algorithm is detailed in: * The algorithm is detailed in:
......
...@@ -323,12 +323,12 @@ msgstr " Hardwarebedingte Grenzen der Taktfrequenz: " ...@@ -323,12 +323,12 @@ msgstr " Hardwarebedingte Grenzen der Taktfrequenz: "
#: utils/cpufreq-info.c:256 #: utils/cpufreq-info.c:256
#, c-format #, c-format
msgid " available frequency steps: " msgid " available frequency steps: "
msgstr " mgliche Taktfrequenzen: " msgstr " mögliche Taktfrequenzen: "
#: utils/cpufreq-info.c:269 #: utils/cpufreq-info.c:269
#, c-format #, c-format
msgid " available cpufreq governors: " msgid " available cpufreq governors: "
msgstr " mgliche Regler: " msgstr " mögliche Regler: "
#: utils/cpufreq-info.c:280 #: utils/cpufreq-info.c:280
#, c-format #, c-format
...@@ -381,7 +381,7 @@ msgstr "Optionen:\n" ...@@ -381,7 +381,7 @@ msgstr "Optionen:\n"
msgid " -e, --debug Prints out debug information [default]\n" msgid " -e, --debug Prints out debug information [default]\n"
msgstr "" msgstr ""
" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n" " -e, --debug Erzeugt detaillierte Informationen, hilfreich\n"
" zum Aufspren von Fehlern\n" " zum Aufspüren von Fehlern\n"
#: utils/cpufreq-info.c:475 #: utils/cpufreq-info.c:475
#, c-format #, c-format
...@@ -424,7 +424,7 @@ msgstr " -p, --policy Findet die momentane Taktik heraus *\n" ...@@ -424,7 +424,7 @@ msgstr " -p, --policy Findet die momentane Taktik heraus *\n"
#: utils/cpufreq-info.c:482 #: utils/cpufreq-info.c:482
#, c-format #, c-format
msgid " -g, --governors Determines available cpufreq governors *\n" msgid " -g, --governors Determines available cpufreq governors *\n"
msgstr " -g, --governors Erzeugt eine Liste mit verfgbaren Reglern *\n" msgstr " -g, --governors Erzeugt eine Liste mit verfügbaren Reglern *\n"
#: utils/cpufreq-info.c:483 #: utils/cpufreq-info.c:483
#, c-format #, c-format
...@@ -450,7 +450,7 @@ msgstr "" ...@@ -450,7 +450,7 @@ msgstr ""
#, c-format #, c-format
msgid " -s, --stats Shows cpufreq statistics if available\n" msgid " -s, --stats Shows cpufreq statistics if available\n"
msgstr "" msgstr ""
" -s, --stats Zeigt, sofern mglich, Statistiken ber cpufreq an.\n" " -s, --stats Zeigt, sofern möglich, Statistiken über cpufreq an.\n"
#: utils/cpufreq-info.c:487 #: utils/cpufreq-info.c:487
#, c-format #, c-format
...@@ -473,9 +473,9 @@ msgid "" ...@@ -473,9 +473,9 @@ msgid ""
"cpufreq\n" "cpufreq\n"
" interface in 2.4. and early 2.6. kernels\n" " interface in 2.4. and early 2.6. kernels\n"
msgstr "" msgstr ""
" -o, --proc Erzeugt Informationen in einem hnlichem Format zu " " -o, --proc Erzeugt Informationen in einem ähnlichem Format zu "
"dem\n" "dem\n"
" der /proc/cpufreq-Datei in 2.4. und frhen 2.6.\n" " der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
" Kernel-Versionen\n" " Kernel-Versionen\n"
#: utils/cpufreq-info.c:491 #: utils/cpufreq-info.c:491
...@@ -491,7 +491,7 @@ msgstr "" ...@@ -491,7 +491,7 @@ msgstr ""
#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 #: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
#, c-format #, c-format
msgid " -h, --help Prints out this screen\n" msgid " -h, --help Prints out this screen\n"
msgstr " -h, --help Gibt diese Kurzbersicht aus\n" msgstr " -h, --help Gibt diese Kurzübersicht aus\n"
#: utils/cpufreq-info.c:495 #: utils/cpufreq-info.c:495
#, c-format #, c-format
...@@ -501,7 +501,7 @@ msgid "" ...@@ -501,7 +501,7 @@ msgid ""
msgstr "" msgstr ""
"Sofern kein anderer Parameter als '-c, --cpu' angegeben wird, liefert " "Sofern kein anderer Parameter als '-c, --cpu' angegeben wird, liefert "
"dieses\n" "dieses\n"
"Programm Informationen, die z.B. zum Berichten von Fehlern ntzlich sind.\n" "Programm Informationen, die z.B. zum Berichten von Fehlern nützlich sind.\n"
#: utils/cpufreq-info.c:497 #: utils/cpufreq-info.c:497
#, c-format #, c-format
...@@ -557,7 +557,7 @@ msgid "" ...@@ -557,7 +557,7 @@ msgid ""
"select\n" "select\n"
msgstr "" msgstr ""
" -d FREQ, --min FREQ neue minimale Taktfrequenz, die der Regler\n" " -d FREQ, --min FREQ neue minimale Taktfrequenz, die der Regler\n"
" auswhlen darf\n" " auswählen darf\n"
#: utils/cpufreq-set.c:28 #: utils/cpufreq-set.c:28
#, c-format #, c-format
...@@ -566,7 +566,7 @@ msgid "" ...@@ -566,7 +566,7 @@ msgid ""
"select\n" "select\n"
msgstr "" msgstr ""
" -u FREQ, --max FREQ neue maximale Taktfrequenz, die der Regler\n" " -u FREQ, --max FREQ neue maximale Taktfrequenz, die der Regler\n"
" auswhlen darf\n" " auswählen darf\n"
#: utils/cpufreq-set.c:29 #: utils/cpufreq-set.c:29
#, c-format #, c-format
...@@ -579,20 +579,20 @@ msgid "" ...@@ -579,20 +579,20 @@ msgid ""
" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" " -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
" governor to be available and loaded\n" " governor to be available and loaded\n"
msgstr "" msgstr ""
" -f FREQ, --freq FREQ setze exakte Taktfrequenz. Bentigt den Regler\n" " -f FREQ, --freq FREQ setze exakte Taktfrequenz. Benötigt den Regler\n"
" 'userspace'.\n" " 'userspace'.\n"
#: utils/cpufreq-set.c:32 #: utils/cpufreq-set.c:32
#, c-format #, c-format
msgid " -r, --related Switches all hardware-related CPUs\n" msgid " -r, --related Switches all hardware-related CPUs\n"
msgstr "" msgstr ""
" -r, --related Setze Werte fr alle CPUs, deren Taktfrequenz\n" " -r, --related Setze Werte für alle CPUs, deren Taktfrequenz\n"
" hardwarebedingt identisch ist.\n" " hardwarebedingt identisch ist.\n"
#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 #: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
#, c-format #, c-format
msgid " -h, --help Prints out this screen\n" msgid " -h, --help Prints out this screen\n"
msgstr " -h, --help Gibt diese Kurzbersicht aus\n" msgstr " -h, --help Gibt diese Kurzübersicht aus\n"
#: utils/cpufreq-set.c:35 #: utils/cpufreq-set.c:35
#, fuzzy, c-format #, fuzzy, c-format
...@@ -618,8 +618,8 @@ msgstr "" ...@@ -618,8 +618,8 @@ msgstr ""
" angenommen\n" " angenommen\n"
"2. Der Parameter -f bzw. --freq kann mit keinem anderen als dem Parameter\n" "2. Der Parameter -f bzw. --freq kann mit keinem anderen als dem Parameter\n"
" -c bzw. --cpu kombiniert werden\n" " -c bzw. --cpu kombiniert werden\n"
"3. FREQuenzen knnen in Hz, kHz (Standard), MHz, GHz oder THz eingegeben\n" "3. FREQuenzen können in Hz, kHz (Standard), MHz, GHz oder THz eingegeben\n"
" werden, indem der Wert und unmittelbar anschlieend (ohne Leerzeichen!)\n" " werden, indem der Wert und unmittelbar anschließend (ohne Leerzeichen!)\n"
" die Einheit angegeben werden. (Bsp: 1GHz )\n" " die Einheit angegeben werden. (Bsp: 1GHz )\n"
" (FREQuenz in kHz =^ MHz * 1000 =^ GHz * 1000000).\n" " (FREQuenz in kHz =^ MHz * 1000 =^ GHz * 1000000).\n"
...@@ -638,7 +638,7 @@ msgid "" ...@@ -638,7 +638,7 @@ msgid ""
msgstr "" msgstr ""
"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n" "Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n"
"- nicht ausreichende Rechte (Administrator)\n" "- nicht ausreichende Rechte (Administrator)\n"
"- der Regler ist nicht verfgbar bzw. nicht geladen\n" "- der Regler ist nicht verfügbar bzw. nicht geladen\n"
"- die angegebene Taktik ist inkorrekt\n" "- die angegebene Taktik ist inkorrekt\n"
"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n" "- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n"
" kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n" " kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n"
...@@ -821,7 +821,7 @@ msgstr "" ...@@ -821,7 +821,7 @@ msgstr ""
#: utils/cpuidle-info.c:48 #: utils/cpuidle-info.c:48
#, fuzzy, c-format #, fuzzy, c-format
msgid "Available idle states:" msgid "Available idle states:"
msgstr " mgliche Taktfrequenzen: " msgstr " mögliche Taktfrequenzen: "
#: utils/cpuidle-info.c:71 #: utils/cpuidle-info.c:71
#, c-format #, c-format
...@@ -924,7 +924,7 @@ msgstr "Aufruf: cpufreq-info [Optionen]\n" ...@@ -924,7 +924,7 @@ msgstr "Aufruf: cpufreq-info [Optionen]\n"
msgid " -s, --silent Only show general C-state information\n" msgid " -s, --silent Only show general C-state information\n"
msgstr "" msgstr ""
" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n" " -e, --debug Erzeugt detaillierte Informationen, hilfreich\n"
" zum Aufspren von Fehlern\n" " zum Aufspüren von Fehlern\n"
#: utils/cpuidle-info.c:150 #: utils/cpuidle-info.c:150
#, fuzzy, c-format #, fuzzy, c-format
...@@ -933,9 +933,9 @@ msgid "" ...@@ -933,9 +933,9 @@ msgid ""
"acpi/processor/*/power\n" "acpi/processor/*/power\n"
" interface in older kernels\n" " interface in older kernels\n"
msgstr "" msgstr ""
" -o, --proc Erzeugt Informationen in einem hnlichem Format zu " " -o, --proc Erzeugt Informationen in einem ähnlichem Format zu "
"dem\n" "dem\n"
" der /proc/cpufreq-Datei in 2.4. und frhen 2.6.\n" " der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
" Kernel-Versionen\n" " Kernel-Versionen\n"
#: utils/cpuidle-info.c:209 #: utils/cpuidle-info.c:209
...@@ -949,7 +949,7 @@ msgstr "" ...@@ -949,7 +949,7 @@ msgstr ""
#~ " -c CPU, --cpu CPU CPU number which information shall be determined " #~ " -c CPU, --cpu CPU CPU number which information shall be determined "
#~ "about\n" #~ "about\n"
#~ msgstr "" #~ msgstr ""
#~ " -c CPU, --cpu CPU Nummer der CPU, ber die Informationen " #~ " -c CPU, --cpu CPU Nummer der CPU, über die Informationen "
#~ "herausgefunden werden sollen\n" #~ "herausgefunden werden sollen\n"
#~ msgid "" #~ msgid ""
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment