Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.

These functions used standards registers in a different page
for both interfaces: copper and fiber.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell.c

@@ -1224,6 +1224,75 @@ static int marvell_read_status(struct phy_device *phydev)
 	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
 	return err;
 }
+
+/* marvell_suspend
+ *
+ * Some Marvell's phys have two modes: fiber and copper.
+ * Both need to be suspended
+ */
+static int marvell_suspend(struct phy_device *phydev)
+{
+	int err;
+
+	/* Suspend the fiber mode first */
+	if (!(phydev->supported & SUPPORTED_FIBRE)) {
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+		if (err < 0)
+			goto error;
+
+		/* With the page set, use the generic suspend */
+		err = genphy_suspend(phydev);
+		if (err < 0)
+			goto error;
+
+		/* Then, the copper link */
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+		if (err < 0)
+			goto error;
+	}
+
+	/* With the page set, use the generic suspend */
+	return genphy_suspend(phydev);
+
+error:
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+	return err;
+}
+
+/* marvell_resume
+ *
+ * Some Marvell's phys have two modes: fiber and copper.
+ * Both need to be resumed
+ */
+static int marvell_resume(struct phy_device *phydev)
+{
+	int err;
+
+	/* Resume the fiber mode first */
+	if (!(phydev->supported & SUPPORTED_FIBRE)) {
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+		if (err < 0)
+			goto error;
+
+		/* With the page set, use the generic resume */
+		err = genphy_resume(phydev);
+		if (err < 0)
+			goto error;
+
+		/* Then, the copper link */
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+		if (err < 0)
+			goto error;
+	}
+
+	/* With the page set, use the generic resume */
+	return genphy_resume(phydev);
+
+error:
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+	return err;
+}
+
 static int marvell_aneg_done(struct phy_device *phydev)
 {
 	int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
@@ -1611,8 +1680,8 @@ static struct phy_driver marvell_drivers[] = {
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
 		.did_interrupt = &m88e1121_did_interrupt,
-		.resume = &genphy_resume,
-		.suspend = &genphy_suspend,
+		.resume = &marvell_resume,
+		.suspend = &marvell_suspend,
 		.get_sset_count = marvell_get_sset_count,
 		.get_strings = marvell_get_strings,
 		.get_stats = marvell_get_stats,