Commit 3811c915 authored by Vicente Bergas's avatar Vicente Bergas Committed by Heiko Stuebner

arm64: dts: rockchip: move rk3399-sapphire pwr_btn to daughterboard

The power button is located on the daughterboard.
Signed-off-by: default avatarVicente Bergas <vicencb@gmail.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 43798872
......@@ -41,7 +41,6 @@
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3399-sapphire.dtsi"
/ {
......@@ -95,22 +94,6 @@ panel_in_edp: endpoint {
};
};
keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
linux,input-type = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_btn>;
wakeup-source;
};
};
rt5651-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "realtek,rt5651-codec";
......@@ -208,12 +191,6 @@ &i2s0 {
};
&pinctrl {
buttons {
pwr_btn: pwr-btn {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
......
......@@ -41,6 +41,7 @@
*/
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/input/input.h"
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
......@@ -102,6 +103,22 @@ dc_12v: dc-12v {
regulator-max-microvolt = <12000000>;
};
keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
linux,input-type = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_btn>;
wakeup-source;
};
};
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
......@@ -475,6 +492,12 @@ &pmu_io_domains {
};
&pinctrl {
buttons {
pwr_btn: pwr-btn {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment