Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "Most of these are for MMP (seeing a bunch of cleanups and refactorings
  for the first time in a while), and for OMAP (a bunch of cleanups and
  added support for voltage controller on OMAP4430)"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
  ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
  OMAP2: fixup doc comments in omap_device
  ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED
  ARM: imx: use generic function to exit coherency
  ARM: tegra: Use WFE for power-gating on Tegra30
  ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()
  ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS
  ARM: s3c: Rename s5p_usb_phy functions
  ARM: s3c: Rename s3c64xx_spi_setname() function
  ARM: imx: Add serial number support for i.MX6/7 SoCs
  ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
  arm64: Introduce config for S32
  ARM: hisi: drop useless depend on ARCH_MULTI_V7
  arm64: realtek: Select reset controller
  ARM: shmobile: rcar-gen2: Drop legacy DT clock support
  ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c
  ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")
  MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support
  ...

MAINTAINERS

@@ -2200,6 +2200,7 @@ F:	Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
 ARM/REALTEK ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-realtek-soc@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/realtek/
 F:	Documentation/devicetree/bindings/arm/realtek.yaml
@@ -11059,9 +11060,11 @@ F:	drivers/media/radio/radio-miropcm20*
 MMP SUPPORT
 R:	Lubomir Rintel <lkundrak@v3.sk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp.git
 S:	Odd Fixes
 F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
+F:	linux/soc/mmp/
 
 MMU GATHER AND TLB INVALIDATION
 M:	Will Deacon <will@kernel.org>
@@ -11908,6 +11911,8 @@ F:	arch/arm/boot/dts/*am3*
 F:	arch/arm/boot/dts/*am4*
 F:	arch/arm/boot/dts/*am5*
 F:	arch/arm/boot/dts/*dra7*
+F:	arch/arm/boot/dts/logicpd-som-lv*
+F:	arch/arm/boot/dts/logicpd-torpedo*
 
 OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
 L:	linux-omap@vger.kernel.org

arch/arm/Kconfig

@@ -1357,7 +1357,7 @@ config ARCH_NR_GPIO
 	int
 	default 2048 if ARCH_SOCFPGA
 	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
-		ARCH_ZYNQ
+		ARCH_ZYNQ || ARCH_ASPEED
 	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
 		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
 	default 416 if ARCH_SUNXI

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -118,6 +118,8 @@
 #define L310_AUX_CTRL_STORE_LIMITATION		BIT(11)	/* R2P0+ */
 #define L310_AUX_CTRL_EXCLUSIVE_CACHE		BIT(12)
 #define L310_AUX_CTRL_ASSOCIATIVITY_16		BIT(16)
+#define L310_AUX_CTRL_FWA_SHIFT			23
+#define L310_AUX_CTRL_FWA_MASK			(3 << 23)
 #define L310_AUX_CTRL_CACHE_REPLACE_RR		BIT(25)	/* R2P0+ */
 #define L310_AUX_CTRL_NS_LOCKDOWN		BIT(26)
 #define L310_AUX_CTRL_NS_INT_CTRL		BIT(27)

arch/arm/mach-bcm/Kconfig

@@ -161,6 +161,8 @@ config ARCH_BCM2835
 	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
+	select ARM_GIC if ARCH_MULTI_V7
+	select ZONE_DMA if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select TIMER_OF
@@ -169,7 +171,7 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	select MFD_CORE
 	help
-	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This enables support for the Broadcom BCM2711 and BCM283x SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.
 
 config ARCH_BCM_53573

arch/arm/mach-bcm/Makefile

@@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
 
 # BCM2835
-obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-y				+= board_bcm2835.o
+obj-y				+= bcm2711.o
 ifeq ($(CONFIG_ARM),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif

arch/arm/mach-bcm/bcm2711.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Wahren
+ */
+
+#include <linux/of_address.h>
+
+#include <asm/mach/arch.h>
+
+#include "platsmp.h"
+
+static const char * const bcm2711_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2711",
+#endif
+};
+
+DT_MACHINE_START(BCM2711, "BCM2711")
+#ifdef CONFIG_ZONE_DMA
+	.dma_zone_size	= SZ_1G,
+#endif
+	.dt_compat = bcm2711_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
+MACHINE_END

arch/arm/mach-bcm/bcm_kona_smc.c

@@ -140,7 +140,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys)
 static void __bcm_kona_smc(void *info)
 {
 	struct bcm_kona_smc_data *data = info;
-	u32 *args = bcm_smc_buffer;
+	u32 __iomem *args = bcm_smc_buffer;
 
 	BUG_ON(smp_processor_id() != 0);
 	BUG_ON(!args);

arch/arm/mach-bcm/platsmp.c

@@ -22,6 +22,8 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
+#include "platsmp.h"
+
 /* Size of mapped Cortex A9 SCU address space */
 #define CORTEX_A9_SCU_SIZE	0x58
 

arch/arm/mach-exynos/Kconfig

@@ -13,6 +13,7 @@ menuconfig ARCH_EXYNOS
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
+	select EXYNOS_ASV
 	select EXYNOS_CHIPID
 	select EXYNOS_THERMAL
 	select EXYNOS_PMU

arch/arm/mach-hisi/Kconfig

@@ -15,7 +15,6 @@ menu "Hisilicon platform type"
 
 config ARCH_HI3xxx
 	bool "Hisilicon Hi36xx family"
-	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -25,17 +24,15 @@ config ARCH_HI3xxx
 	  Support for Hisilicon Hi36xx SoC family
 
 config ARCH_HIP01
-       bool "Hisilicon HIP01 family"
-       depends on ARCH_MULTI_V7
-       select HAVE_ARM_SCU if SMP
-       select HAVE_ARM_TWD if SMP
-       select ARM_GLOBAL_TIMER
-       help
-         Support for Hisilicon HIP01 SoC family
+	bool "Hisilicon HIP01 family"
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select ARM_GLOBAL_TIMER
+	help
+	  Support for Hisilicon HIP01 SoC family
 
 config ARCH_HIP04
 	bool "Hisilicon HiP04 Cortex A15 family"
-	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
@@ -46,7 +43,6 @@ config ARCH_HIP04
 
 config ARCH_HIX5HD2
 	bool "Hisilicon X5HD2 family"
-	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP

arch/arm/mach-imx/anatop.c

@@ -19,8 +19,6 @@
 #define ANADIG_REG_2P5		0x130
 #define ANADIG_REG_CORE		0x140
 #define ANADIG_ANA_MISC0	0x150
-#define ANADIG_USB1_CHRG_DETECT	0x1b0
-#define ANADIG_USB2_CHRG_DETECT	0x210
 #define ANADIG_DIGPROG		0x260
 #define ANADIG_DIGPROG_IMX6SL	0x280
 #define ANADIG_DIGPROG_IMX7D	0x800
@@ -33,8 +31,6 @@
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	0x1000
 /* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */
 #define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS	0x2000
-#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x80000
-#define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x100000
 
 static struct regmap *anatop;
 
@@ -96,16 +92,6 @@ void imx_anatop_post_resume(void)
 
 }
 
-static void imx_anatop_usb_chrg_detect_disable(void)
-{
-	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
-		BM_ANADIG_USB_CHRG_DETECT_EN_B
-		| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-	regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
-		BM_ANADIG_USB_CHRG_DETECT_EN_B |
-		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-}
-
 void __init imx_init_revision_from_anatop(void)
 {
 	struct device_node *np;
@@ -171,10 +157,6 @@ void __init imx_init_revision_from_anatop(void)
 void __init imx_anatop_init(void)
 {
 	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
-	if (IS_ERR(anatop)) {
+	if (IS_ERR(anatop))
 		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
-		return;
-	}
-
-	imx_anatop_usb_chrg_detect_disable();
 }

arch/arm/mach-imx/cpu.c

 // SPDX-License-Identifier: GPL-2.0
 #include <linux/err.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 
 #include "hardware.h"
 #include "common.h"
 
+#define OCOTP_UID_H	0x420
+#define OCOTP_UID_L	0x410
+
 unsigned int __mxc_cpu_type;
 static unsigned int imx_soc_revision;
 
@@ -76,9 +81,13 @@ void __init imx_aips_allow_unprivileged_access(
 struct device * __init imx_soc_device_init(void)
 {
 	struct soc_device_attribute *soc_dev_attr;
+	const char *ocotp_compat = NULL;
 	struct soc_device *soc_dev;
 	struct device_node *root;
+	struct regmap *ocotp;
 	const char *soc_id;
+	u64 soc_uid = 0;
+	u32 val;
 	int ret;
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
@@ -119,30 +128,39 @@ struct device * __init imx_soc_device_init(void)
 		soc_id = "i.MX53";
 		break;
 	case MXC_CPU_IMX6SL:
+		ocotp_compat = "fsl,imx6sl-ocotp";
 		soc_id = "i.MX6SL";
 		break;
 	case MXC_CPU_IMX6DL:
+		ocotp_compat = "fsl,imx6q-ocotp";
 		soc_id = "i.MX6DL";
 		break;
 	case MXC_CPU_IMX6SX:
+		ocotp_compat = "fsl,imx6sx-ocotp";
 		soc_id = "i.MX6SX";
 		break;
 	case MXC_CPU_IMX6Q:
+		ocotp_compat = "fsl,imx6q-ocotp";
 		soc_id = "i.MX6Q";
 		break;
 	case MXC_CPU_IMX6UL:
+		ocotp_compat = "fsl,imx6ul-ocotp";
 		soc_id = "i.MX6UL";
 		break;
 	case MXC_CPU_IMX6ULL:
+		ocotp_compat = "fsl,imx6ul-ocotp";
 		soc_id = "i.MX6ULL";
 		break;
 	case MXC_CPU_IMX6ULZ:
+		ocotp_compat = "fsl,imx6ul-ocotp";
 		soc_id = "i.MX6ULZ";
 		break;
 	case MXC_CPU_IMX6SLL:
+		ocotp_compat = "fsl,imx6sll-ocotp";
 		soc_id = "i.MX6SLL";
 		break;
 	case MXC_CPU_IMX7D:
+		ocotp_compat = "fsl,imx7d-ocotp";
 		soc_id = "i.MX7D";
 		break;
 	case MXC_CPU_IMX7ULP:
@@ -153,18 +171,36 @@ struct device * __init imx_soc_device_init(void)
 	}
 	soc_dev_attr->soc_id = soc_id;
 
+	if (ocotp_compat) {
+		ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
+		if (IS_ERR(ocotp))
+			pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
+
+		regmap_read(ocotp, OCOTP_UID_H, &val);
+		soc_uid = val;
+		regmap_read(ocotp, OCOTP_UID_L, &val);
+		soc_uid <<= 32;
+		soc_uid |= val;
+	}
+
 	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
 					   (imx_soc_revision >> 4) & 0xf,
 					   imx_soc_revision & 0xf);
 	if (!soc_dev_attr->revision)
 		goto free_soc;
 
+	soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
+	if (!soc_dev_attr->serial_number)
+		goto free_rev;
+
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev))
-		goto free_rev;
+		goto free_serial_number;
 
 	return soc_device_to_device(soc_dev);
 
+free_serial_number:
+	kfree(soc_dev_attr->serial_number);
 free_rev:
 	kfree(soc_dev_attr->revision);
 free_soc:

arch/arm/mach-imx/hotplug.c

@@ -6,32 +6,12 @@
 
 #include <linux/errno.h>
 #include <linux/jiffies.h>
+#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/proc-fns.h>
 
 #include "common.h"
 
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -39,7 +19,7 @@ static inline void cpu_enter_lowpower(void)
  */
 void imx_cpu_die(unsigned int cpu)
 {
-	cpu_enter_lowpower();
+	v7_exit_coherency_flush(louis);
 	/*
 	 * We use the cpu jumping argument register to sync with
 	 * imx_cpu_kill() which is running on cpu0 and waiting for

arch/arm/mach-mmp/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
+	bool "Marvell PXA168/910/MMP2/MMP3"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
 	select GPIO_PXA
 	select GPIOLIB
 	select PINCTRL
 	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+	  Support for Marvell's PXA168/PXA910(MMP), MMP2, and MMP3 processor lines.
 
 if ARCH_MMP
 
@@ -129,6 +129,24 @@ config MACH_MMP2_DT
 	  Include support for Marvell MMP2 based platforms using
 	  the device tree.
 
+config MACH_MMP3_DT
+	bool "Support MMP3 (ARMv7) platforms"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select CACHE_L2X0
+	select PINCTRL
+	select PINCTRL_SINGLE
+	select ARCH_HAS_RESET_CONTROLLER
+	select CPU_PJ4B
+	select PM_GENERIC_DOMAINS if PM
+	select PM_GENERIC_DOMAINS_OF if PM && OF
+	help
+	  Say 'Y' here if you want to include support for platforms
+	  with Marvell MMP3 processor, also known as PXA2128 or
+	  Armada 620.
+
 endmenu
 
 config CPU_PXA168

arch/arm/mach-mmp/Makefile

@@ -22,6 +22,9 @@ ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
 obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
 endif
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
+endif
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
@@ -34,5 +37,6 @@ obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
+obj-$(CONFIG_MACH_MMP3_DT)	+= mmp3.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
 obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o

arch/arm/mach-mmp/addr-map.h

@@ -20,6 +20,10 @@
 #define AXI_VIRT_BASE		IOMEM(0xfe200000)
 #define AXI_PHYS_SIZE		0x00200000
 
+#define PGU_PHYS_BASE		0xe0000000
+#define PGU_VIRT_BASE		IOMEM(0xfe400000)
+#define PGU_PHYS_SIZE		0x00100000
+
 /* Static Memory Controller - Chip Select 0 and 1 */
 #define SMC_CS0_PHYS_BASE	0x80000000
 #define SMC_CS0_PHYS_SIZE	0x10000000
@@ -38,4 +42,7 @@
 #define CIU_VIRT_BASE		(AXI_VIRT_BASE + 0x82c00)
 #define CIU_REG(x)		(CIU_VIRT_BASE + (x))
 
+#define SCU_VIRT_BASE		(PGU_VIRT_BASE)
+#define SCU_REG(x)		(SCU_VIRT_BASE + (x))
+
 #endif /* __ASM_MACH_ADDR_MAP_H */

arch/arm/mach-mmp/common.c

@@ -13,11 +13,11 @@
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include "addr-map.h"
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 
 #include "common.h"
 
-#define MMP_CHIPID	(AXI_VIRT_BASE + 0x82c00)
+#define MMP_CHIPID	CIU_REG(0x00)
 
 unsigned int mmp_chip_id;
 EXPORT_SYMBOL(mmp_chip_id);
@@ -36,6 +36,15 @@ static struct map_desc standard_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc mmp2_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(PGU_PHYS_BASE),
+		.virtual	= (unsigned long)PGU_VIRT_BASE,
+		.length		= PGU_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 void __init mmp_map_io(void)
 {
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
@@ -44,6 +53,12 @@ void __init mmp_map_io(void)
 	mmp_chip_id = __raw_readl(MMP_CHIPID);
 }
 
+void __init mmp2_map_io(void)
+{
+	mmp_map_io();
+	iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc));
+}
+
 void mmp_restart(enum reboot_mode mode, const char *cmd)
 {
 	soft_restart(0);

arch/arm/mach-mmp/common.h

@@ -5,4 +5,5 @@
 extern void mmp_timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
+extern void __init mmp2_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);

arch/arm/mach-mmp/devices.c

@@ -11,7 +11,7 @@
 #include <asm/irq.h>
 #include "irqs.h"
 #include "devices.h"
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "regs-usb.h"
 
 int __init pxa_register_device(struct pxa_device_desc *desc,

arch/arm/mach-mmp/mmp-dt.c

@@ -9,14 +9,13 @@
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
+#include <linux/clocksource.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-tauros2.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_init_timer(void);
-
 static const char *const pxa168_dt_board_compat[] __initconst = {
 	"mrvl,pxa168-aspenite",
 	NULL,
@@ -32,8 +31,8 @@ static void __init mmp_init_time(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	mmp_dt_init_timer();
 	of_clk_init(NULL);
+	timer_probe();
 }
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")

arch/arm/mach-mmp/mmp2-dt.c

@@ -10,21 +10,20 @@
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
+#include <linux/clocksource.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-tauros2.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_init_timer(void);
-
 static void __init mmp_init_time(void)
 {
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
 	of_clk_init(NULL);
-	mmp_dt_init_timer();
+	timer_probe();
 }
 
 static const char *const mmp2_dt_board_compat[] __initconst = {
@@ -33,7 +32,7 @@ static const char *const mmp2_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
-	.map_io		= mmp_map_io,
+	.map_io		= mmp2_map_io,
 	.init_time	= mmp_init_time,
 	.dt_compat	= mmp2_dt_board_compat,
 MACHINE_END

arch/arm/mach-mmp/mmp2.c

@@ -20,7 +20,7 @@
 #include <asm/mach/time.h>
 #include "addr-map.h"
 #include "regs-apbc.h"
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "irqs.h"
 #include "mfp.h"
 #include "devices.h"

arch/arm/mach-mmp/mmp3.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Marvell MMP3 aka PXA2128 aka 88AP2128 support
+ *
+ *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "common.h"
+
+static const char *const mmp3_dt_board_compat[] __initconst = {
+	"marvell,mmp3",
+	NULL,
+};
+
+DT_MACHINE_START(MMP2_DT, "Marvell MMP3")
+	.map_io		= mmp2_map_io,
+	.dt_compat	= mmp3_dt_board_compat,
+	.l2c_aux_val	= 1 << L310_AUX_CTRL_FWA_SHIFT |
+			  L310_AUX_CTRL_DATA_PREFETCH |
+			  L310_AUX_CTRL_INSTR_PREFETCH,
+	.l2c_aux_mask	= 0xc20fffff,
+MACHINE_END

arch/arm/mach-mmp/platsmp.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/smp.h>
+#include "addr-map.h"
+
+#define SW_BRANCH_VIRT_ADDR	CIU_REG(0x24)
+
+static int mmp3_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/*
+	 * Apparently, the boot ROM on the second core spins on this
+	 * register becoming non-zero and then jumps to the address written
+	 * there. No IPIs involved.
+	 */
+	__raw_writel(__pa_symbol(secondary_startup), SW_BRANCH_VIRT_ADDR);
+	return 0;
+}
+
+static void mmp3_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(SCU_VIRT_BASE);
+}
+
+static const struct smp_operations mmp3_smp_ops __initconst = {
+	.smp_prepare_cpus	= mmp3_smp_prepare_cpus,
+	.smp_boot_secondary	= mmp3_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mmp3_smp, "marvell,mmp3-smp", &mmp3_smp_ops);

arch/arm/mach-mmp/pm-mmp2.c

@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <asm/mach-types.h>
 
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "addr-map.h"
 #include "pm-mmp2.h"
 #include "regs-icu.h"

arch/arm/mach-mmp/pm-pxa910.c

@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/outercache.h>
 
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "addr-map.h"
 #include "pm-pxa910.h"
 #include "regs-icu.h"

arch/arm/mach-mmp/pxa168.c

@@ -21,7 +21,7 @@
 #include "addr-map.h"
 #include "clock.h"
 #include "common.h"
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "devices.h"
 #include "irqs.h"
 #include "mfp.h"

arch/arm/mach-mmp/pxa910.c

@@ -18,7 +18,7 @@
 #include <asm/mach/time.h>
 #include "addr-map.h"
 #include "regs-apbc.h"
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "irqs.h"
 #include "mfp.h"
 #include "devices.h"

arch/arm/mach-mmp/regs-usb.h

@@ -121,100 +121,6 @@
 
 #define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
 
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0		0x4
-#define USB2_PLL_REG1		0x8
-#define USB2_TX_REG0		0x10
-#define USB2_TX_REG1		0x14
-#define USB2_TX_REG2		0x18
-#define USB2_RX_REG0		0x20
-#define USB2_RX_REG1		0x24
-#define USB2_RX_REG2		0x28
-#define USB2_ANA_REG0		0x30
-#define USB2_ANA_REG1		0x34
-#define USB2_ANA_REG2		0x38
-#define USB2_DIG_REG0		0x3C
-#define USB2_DIG_REG1		0x40
-#define USB2_DIG_REG2		0x44
-#define USB2_DIG_REG3		0x48
-#define USB2_TEST_REG0		0x4C
-#define USB2_TEST_REG1		0x50
-#define USB2_TEST_REG2		0x54
-#define USB2_CHARGER_REG0	0x58
-#define USB2_OTG_REG0		0x5C
-#define USB2_PHY_MON0		0x60
-#define USB2_RESETVE_REG0	0x64
-#define USB2_ICID_REG0		0x78
-#define USB2_ICID_REG1		0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3		0
-#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3		8
-#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3		12
-#define USB2_PLL_VDD18_SHIFT_MMP3		14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3		0
-#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3		4
-#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3			8
-#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
-#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3		13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3			4
-#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3		8
-#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT		10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
-#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
-
 /* fsic registers */
 #define FSIC_MISC			0x4
 #define FSIC_INT			0x28

arch/arm/mach-mmp/time.c

@@ -33,7 +33,7 @@
 #include "regs-timers.h"
 #include "regs-apbc.h"
 #include "irqs.h"
-#include "cputype.h"
+#include <linux/soc/mmp/cputype.h>
 #include "clock.h"
 
 #define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
@@ -155,7 +155,8 @@ static void __init timer_config(void)
 
 	__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
 
-	ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+	ccr &= (cpu_is_mmp2() || cpu_is_mmp3()) ?
+		(TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
 		(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
 	__raw_writel(ccr, mmp_timer_base + TMR_CCR);
 
@@ -195,30 +196,17 @@ void __init mmp_timer_init(int irq, unsigned long rate)
 	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
 }
 
-#ifdef CONFIG_OF
-static const struct of_device_id mmp_timer_dt_ids[] = {
-	{ .compatible = "mrvl,mmp-timer", },
-	{}
-};
-
-void __init mmp_dt_init_timer(void)
+static int __init mmp_dt_init_timer(struct device_node *np)
 {
-	struct device_node *np;
 	struct clk *clk;
 	int irq, ret;
 	unsigned long rate;
 
-	np = of_find_matching_node(NULL, mmp_timer_dt_ids);
-	if (!np) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	clk = of_clk_get(np, 0);
 	if (!IS_ERR(clk)) {
 		ret = clk_prepare_enable(clk);
 		if (ret)
-			goto out;
+			return ret;
 		rate = clk_get_rate(clk) / 2;
 	} else if (cpu_is_pj4()) {
 		rate = 6500000;
@@ -227,18 +215,15 @@ void __init mmp_dt_init_timer(void)
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!irq)
+		return -EINVAL;
+
 	mmp_timer_base = of_iomap(np, 0);
-	if (!mmp_timer_base) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!mmp_timer_base)
+		return -ENOMEM;
+
 	mmp_timer_init(irq, rate);
-	return;
-out:
-	pr_err("Failed to get timer from device tree with error:%d\n", ret);
+	return 0;
 }
-#endif
+
+TIMER_OF_DECLARE(mmp_timer, "mrvl,mmp-timer", mmp_dt_init_timer);

arch/arm/mach-omap1/Kconfig

@@ -4,30 +4,25 @@ if ARCH_OMAP1
 menu "TI OMAP1 specific features"
 
 comment "OMAP Core Type"
-	depends on ARCH_OMAP1
 
 config ARCH_OMAP730
-	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP850
-	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 
 config ARCH_OMAP15XX
-	depends on ARCH_OMAP1
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
-	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
@@ -35,7 +30,6 @@ config ARCH_OMAP16XX
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
-	depends on ARCH_OMAP
 	default y
 	help
 	  Pin multiplexing support for OMAP boards. If your bootloader
@@ -60,25 +54,24 @@ config OMAP_MUX_WARNINGS
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP1
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
 
 config MACH_OMAP_H2
 	bool "TI H2 Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H3
 	bool "TI H3 Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
@@ -91,7 +84,7 @@ config MACH_HERALD
 
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
@@ -106,21 +99,21 @@ config OMAP_OSK_MISTRAL
 
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP730
     	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP730
     	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	help
 	  Support for the Palm Tungsten E PDA.  To boot the kernel, you'll
 	  need a PalmOS compatible bootloader; check out
@@ -129,7 +122,7 @@ config MACH_OMAP_PALMTE
 
 config MACH_OMAP_PALMZ71
 	bool "Palm Zire71"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	help
 	 Support for the Palm Zire71 PDA. To boot the kernel,
 	 you'll need a PalmOS compatible bootloader; check out
@@ -138,7 +131,7 @@ config MACH_OMAP_PALMZ71
 
 config MACH_OMAP_PALMTT
 	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	help
 	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
 	  need a PalmOS compatible bootloader (Garux); check out
@@ -147,7 +140,7 @@ config MACH_OMAP_PALMTT
 
 config MACH_SX1
 	bool "Siemens SX1"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	select I2C
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,
@@ -159,14 +152,14 @@ config MACH_SX1
 
 config MACH_NOKIA770
 	bool "Nokia 770"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX
 	help
 	  Support for the Nokia 770 Internet Tablet. Say Y here if you
 	  have such a device.
 
 config MACH_AMS_DELTA
 	bool "Amstrad E3 (Delta)"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	depends on ARCH_OMAP15XX
 	select FIQ
 	select GPIO_GENERIC_PLATFORM
 	select LEDS_GPIO_REGISTER
@@ -178,7 +171,7 @@ config MACH_AMS_DELTA
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -110,7 +110,7 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip,
 
 		/*
 		 * FIQ handler takes full control over serio data and clk GPIO
-		 * pins.  Initiaize them and keep requested so nobody can
+		 * pins.  Initialize them and keep requested so nobody can
 		 * interfere.  Fail if any of those two couldn't be requested.
 		 */
 		switch (i) {

arch/arm/mach-omap2/Makefile

@@ -29,6 +29,11 @@ obj-y += mcbsp.o
 endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+
+ifneq ($(CONFIG_MFD_CPCAP),)
+obj-y 					+= pmic-cpcap.o
+endif
+
 obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4

arch/arm/mach-omap2/clockdomain.c

@@ -1147,7 +1147,21 @@ void clkdm_del_autodeps(struct clockdomain *clkdm)
 
 /* Clockdomain-to-clock/hwmod framework interface code */
 
-static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
+/**
+ * clkdm_clk_enable - add an enabled downstream clock to this clkdm
+ * @clkdm: struct clockdomain *
+ * @clk: struct clk * of the enabled downstream clock
+ *
+ * Increment the usecount of the clockdomain @clkdm and ensure that it
+ * is awake before @clk is enabled.  Intended to be called by
+ * clk_enable() code.  If the clockdomain is in software-supervised
+ * idle mode, force the clockdomain to wake.  If the clockdomain is in
+ * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
+ * ensure that devices in the clockdomain can be read from/written to
+ * by on-chip processors.  Returns -EINVAL if passed null pointers;
+ * returns 0 upon success or if the clockdomain is in hwsup idle mode.
+ */
+int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *unused)
 {
 	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
 		return -EINVAL;
@@ -1174,33 +1188,6 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
 	return 0;
 }
 
-/**
- * clkdm_clk_enable - add an enabled downstream clock to this clkdm
- * @clkdm: struct clockdomain *
- * @clk: struct clk * of the enabled downstream clock
- *
- * Increment the usecount of the clockdomain @clkdm and ensure that it
- * is awake before @clk is enabled.  Intended to be called by
- * clk_enable() code.  If the clockdomain is in software-supervised
- * idle mode, force the clockdomain to wake.  If the clockdomain is in
- * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
- * ensure that devices in the clockdomain can be read from/written to
- * by on-chip processors.  Returns -EINVAL if passed null pointers;
- * returns 0 upon success or if the clockdomain is in hwsup idle mode.
- */
-int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
-{
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream clocks for debugging purposes?
-	 */
-
-	if (!clk)
-		return -EINVAL;
-
-	return _clkdm_clk_hwmod_enable(clkdm);
-}
-
 /**
  * clkdm_clk_disable - remove an enabled downstream clock from this clkdm
  * @clkdm: struct clockdomain *
@@ -1216,13 +1203,13 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
  */
 int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 {
-	if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
 		return -EINVAL;
 
 	pwrdm_lock(clkdm->pwrdm.ptr);
 
 	/* corner case: disabling unused clocks */
-	if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0)
+	if (clk && (__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0)
 		goto ccd_exit;
 
 	if (clkdm->usecount == 0) {
@@ -1277,7 +1264,7 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	return _clkdm_clk_hwmod_enable(clkdm);
+	return clkdm_clk_enable(clkdm, NULL);
 }
 
 /**
@@ -1300,35 +1287,10 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
 		return 0;
 
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream hwmods for debugging purposes?
-	 */
-
-	if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+	if (!oh)
 		return -EINVAL;
 
-	pwrdm_lock(clkdm->pwrdm.ptr);
-
-	if (clkdm->usecount == 0) {
-		pwrdm_unlock(clkdm->pwrdm.ptr);
-		WARN_ON(1); /* underflow */
-		return -ERANGE;
-	}
-
-	clkdm->usecount--;
-	if (clkdm->usecount > 0) {
-		pwrdm_unlock(clkdm->pwrdm.ptr);
-		return 0;
-	}
-
-	arch_clkdm->clkdm_clk_disable(clkdm);
-	pwrdm_state_switch_nolock(clkdm->pwrdm.ptr);
-	pwrdm_unlock(clkdm->pwrdm.ptr);
-
-	pr_debug("clockdomain: %s: disabled\n", clkdm->name);
-
-	return 0;
+	return clkdm_clk_disable(clkdm, NULL);
 }
 
 /**

arch/arm/mach-omap2/control.c

@@ -684,7 +684,7 @@ static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)];
  *
  * Save the wkup domain registers
  */
-void am43xx_control_save_context(void)
+static void am43xx_control_save_context(void)
 {
 	int i;
 
@@ -698,7 +698,7 @@ void am43xx_control_save_context(void)
  *
  * Restore the wkup domain registers
  */
-void am43xx_control_restore_context(void)
+static void am43xx_control_restore_context(void)
 {
 	int i;
 

arch/arm/mach-omap2/control.h

@@ -195,6 +195,7 @@
 #define OMAP44XX_CONTROL_FUSE_MPU_OPP100	0x243
 #define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO	0x246
 #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO	0x249
+#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB	0x24C
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP50	0x254
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100	0x257
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV	0x25A

arch/arm/mach-omap2/display.c

@@ -265,6 +265,7 @@ static int __init omapdss_init_of(void)
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
+		put_device(&pdev->dev);
 		return r;
 	}
 

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -227,7 +227,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
 	unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
-	unsigned int wakeup_cpu;
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		return -ENXIO;
@@ -292,7 +291,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	 * secure devices, CPUx does WFI which can result in
 	 * domain transition
 	 */
-	wakeup_cpu = smp_processor_id();
 	pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
 
 	pwrdm_post_transition(NULL);

arch/arm/mach-omap2/omap_device.c

@@ -119,11 +119,7 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od,
 
 /**
  * omap_device_build_from_dt - build an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
+ * @pdev: The platform device to update.
  *
  * Function for building an omap_device already registered from device-tree
  *
@@ -292,7 +288,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od)
 
 /**
  * omap_device_get_context_loss_count - get lost context count
- * @od: struct omap_device *
+ * @pdev: The platform device to update.
  *
  * Using the primary hwmod, query the context loss count for this
  * device.
@@ -321,9 +317,8 @@ int omap_device_get_context_loss_count(struct platform_device *pdev)
 /**
  * omap_device_alloc - allocate an omap_device
  * @pdev: platform_device that will be included in this omap_device
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
+ * @ohs: ptr to the omap_hwmod for this omap_device
+ * @oh_cnt: the size of the ohs list
  *
  * Convenience function for allocating an omap_device structure and filling
  * hwmods, and resources.
@@ -649,7 +644,7 @@ struct dev_pm_domain omap_device_pm_domain = {
 
 /**
  * omap_device_register - register an omap_device with one omap_hwmod
- * @od: struct omap_device * to register
+ * @pdev: the platform device (omap_device) to register.
  *
  * Register the omap_device structure.  This currently just calls
  * platform_device_register() on the underlying platform_device.
@@ -668,7 +663,7 @@ int omap_device_register(struct platform_device *pdev)
 
 /**
  * omap_device_enable - fully activate an omap_device
- * @od: struct omap_device * to activate
+ * @pdev: the platform device to activate
  *
  * Do whatever is necessary for the hwmods underlying omap_device @od
  * to be accessible and ready to operate.  This generally involves
@@ -702,7 +697,7 @@ int omap_device_enable(struct platform_device *pdev)
 
 /**
  * omap_device_idle - idle an omap_device
- * @od: struct omap_device * to idle
+ * @pdev: The platform_device (omap_device) to idle
  *
  * Idle omap_device @od.  Device drivers call this function indirectly
  * via pm_runtime_put*().  Returns -EINVAL if the omap_device is not

arch/arm/mach-omap2/omap_hwmod.c

@@ -623,39 +623,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
-/**
- * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
- * @oh: struct omap_hwmod *
- *
- * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
- * upon error or 0 upon success.
- */
-static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
-{
-	if (!oh->class->sysc ||
-	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
-	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
-	      (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
-		*v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
-
-	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
-	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
-
-	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
-
-	return 0;
-}
-
 static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
 {
 	struct clk_hw_omap *clk;
@@ -3867,70 +3834,6 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
  * for context save/restore operations?
  */
 
-/**
- * omap_hwmod_enable_wakeup - allow device to wake up the system
- * @oh: struct omap_hwmod *
- *
- * Sets the module OCP socket ENAWAKEUP bit to allow the module to
- * send wakeups to the PRCM, and enable I/O ring wakeup events for
- * this IP block if it has dynamic mux entries.  Eventually this
- * should set PRCM wakeup registers to cause the PRCM to receive
- * wakeup events from the module.  Does not set any wakeup routing
- * registers beyond this point - if the module is to wake up any other
- * module or subsystem, that must be set separately.  Called by
- * omap_device code.  Returns -EINVAL on error or 0 upon success.
- */
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-	u32 v;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->class->sysc &&
-	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
-		v = oh->_sysc_cache;
-		_enable_wakeup(oh, &v);
-		_write_sysconfig(v, oh);
-	}
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_disable_wakeup - prevent device from waking the system
- * @oh: struct omap_hwmod *
- *
- * Clears the module OCP socket ENAWAKEUP bit to prevent the module
- * from sending wakeups to the PRCM, and disable I/O ring wakeup
- * events for this IP block if it has dynamic mux entries.  Eventually
- * this should clear PRCM wakeup registers to cause the PRCM to ignore
- * wakeup events from the module.  Does not set any wakeup routing
- * registers beyond this point - if the module is to wake up any other
- * module or subsystem, that must be set separately.  Called by
- * omap_device code.  Returns -EINVAL on error or 0 upon success.
- */
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-	u32 v;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->class->sysc &&
-	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
-		v = oh->_sysc_cache;
-		_disable_wakeup(oh, &v);
-		_write_sysconfig(v, oh);
-	}
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
 /**
  * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
  * contained in the hwmod module.

arch/arm/mach-omap2/omap_hwmod.h

@@ -646,9 +646,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
 int omap_hwmod_for_each_by_class(const char *classname,
 				 int (*fn)(struct omap_hwmod *oh,
 					   void *user),

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -790,7 +790,7 @@ static struct omap_hwmod_class omap44xx_sha0_hwmod_class = {
 	.sysc		= &omap44xx_sha0_sysc,
 };
 
-struct omap_hwmod omap44xx_sha0_hwmod = {
+static struct omap_hwmod omap44xx_sha0_hwmod = {
 	.name		= "sham",
 	.class		= &omap44xx_sha0_hwmod_class,
 	.clkdm_name	= "l4_secure_clkdm",
@@ -974,7 +974,7 @@ static struct omap_hwmod omap44xx_des_hwmod = {
 	},
 };
 
-struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_des_hwmod,
 	.clk		= "l3_div_ck",

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -683,7 +683,7 @@ static struct omap_hwmod_class dra7xx_sha0_hwmod_class = {
 	.sysc		= &dra7xx_sha0_sysc,
 };
 
-struct omap_hwmod dra7xx_sha0_hwmod = {
+static struct omap_hwmod dra7xx_sha0_hwmod = {
 	.name		= "sham",
 	.class		= &dra7xx_sha0_hwmod_class,
 	.clkdm_name	= "l4sec_clkdm",

arch/arm/mach-omap2/omap_twl.c

@@ -36,11 +36,6 @@
 #define OMAP4_VDD_CORE_SR_VOLT_REG	0x61
 #define OMAP4_VDD_CORE_SR_CMD_REG	0x62
 
-#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
-#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
-#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
-#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
-
 static bool is_offset_valid;
 static u8 smps_offset;
 
@@ -219,7 +214,8 @@ int __init omap4_twl_init(void)
 {
 	struct voltagedomain *voltdm;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap44xx() ||
+	    of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
 		return -ENODEV;
 
 	voltdm = voltdm_lookup("mpu");

arch/arm/mach-omap2/opp4xxx_data.c

@@ -32,20 +32,22 @@
 
 #define OMAP4430_VDD_MPU_OPP50_UV		1025000
 #define OMAP4430_VDD_MPU_OPP100_UV		1200000
-#define OMAP4430_VDD_MPU_OPPTURBO_UV		1313000
-#define OMAP4430_VDD_MPU_OPPNITRO_UV		1375000
+#define OMAP4430_VDD_MPU_OPPTURBO_UV		1325000
+#define OMAP4430_VDD_MPU_OPPNITRO_UV		1388000
+#define OMAP4430_VDD_MPU_OPPNITROSB_UV		1398000
 
 struct omap_volt_data omap443x_vdd_mpu_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27),
 	VOLT_DATA_DEFINE(0, 0, 0, 0),
 };
 
-#define OMAP4430_VDD_IVA_OPP50_UV		1013000
-#define OMAP4430_VDD_IVA_OPP100_UV		1188000
-#define OMAP4430_VDD_IVA_OPPTURBO_UV		1300000
+#define OMAP4430_VDD_IVA_OPP50_UV		 950000
+#define OMAP4430_VDD_IVA_OPP100_UV		1114000
+#define OMAP4430_VDD_IVA_OPPTURBO_UV		1291000
 
 struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
@@ -54,8 +56,8 @@ struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
 	VOLT_DATA_DEFINE(0, 0, 0, 0),
 };
 
-#define OMAP4430_VDD_CORE_OPP50_UV		1025000
-#define OMAP4430_VDD_CORE_OPP100_UV		1200000
+#define OMAP4430_VDD_CORE_OPP50_UV		 962000
+#define OMAP4430_VDD_CORE_OPP100_UV		1127000
 
 struct omap_volt_data omap443x_vdd_core_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),

arch/arm/mach-omap2/pdata-quirks.c

@@ -10,7 +10,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
@@ -144,53 +143,6 @@ static void __init omap3_sbc_t3530_legacy_init(void)
 	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
 }
 
-static struct ti_st_plat_data wilink_pdata = {
-	.nshutdown_gpio = 137,
-	.dev_name = "/dev/ttyO1",
-	.flow_cntrl = 1,
-	.baud_rate = 300000,
-};
-
-static struct platform_device wl18xx_device = {
-	.name	= "kim",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wilink_pdata,
-	}
-};
-
-static struct ti_st_plat_data wilink7_pdata = {
-	.nshutdown_gpio = 162,
-	.dev_name = "/dev/ttyO1",
-	.flow_cntrl = 1,
-	.baud_rate = 3000000,
-};
-
-static struct platform_device wl128x_device = {
-	.name	= "kim",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wilink7_pdata,
-	}
-};
-
-static struct platform_device btwilink_device = {
-	.name	= "btwilink",
-	.id	= -1,
-};
-
-static void __init omap3_igep0020_rev_f_legacy_init(void)
-{
-	platform_device_register(&wl18xx_device);
-	platform_device_register(&btwilink_device);
-}
-
-static void __init omap3_igep0030_rev_g_legacy_init(void)
-{
-	platform_device_register(&wl18xx_device);
-	platform_device_register(&btwilink_device);
-}
-
 static void __init omap3_evm_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
@@ -293,8 +245,6 @@ static void __init omap3_tao3530_legacy_init(void)
 static void __init omap3_logicpd_torpedo_init(void)
 {
 	omap3_gpio126_127_129();
-	platform_device_register(&wl128x_device);
-	platform_device_register(&btwilink_device);
 }
 
 /* omap3pandora legacy devices */
@@ -575,8 +525,6 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
-	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
-	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
 	{ "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },

arch/arm/mach-omap2/pm.c

@@ -148,6 +148,7 @@ int __init omap2_common_pm_late_init(void)
 	/* Init the voltage layer */
 	omap3_twl_init();
 	omap4_twl_init();
+	omap4_cpcap_init();
 	omap_voltage_late_init();
 
 	/* Smartreflex device init */

arch/arm/mach-omap2/pm.h

@@ -107,6 +107,11 @@ extern u16 pm44xx_errata;
 #define IS_PM44XX_ERRATUM(id)		0
 #endif
 
+#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
+#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
+#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
+#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
+
 #ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
 extern void omap_enable_smartreflex_on_init(void);
@@ -134,6 +139,15 @@ static inline int omap4_twl_init(void)
 }
 #endif
 
+#if IS_ENABLED(CONFIG_MFD_CPCAP)
+extern int omap4_cpcap_init(void);
+#else
+static inline int omap4_cpcap_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 #ifdef CONFIG_PM
 extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
 extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);

arch/arm/mach-omap2/pm44xx.c

@@ -128,18 +128,9 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 		return 0;
 	}
 
-	/*
-	 * Bootloader or kexec boot may have LOGICRETSTATE cleared
-	 * for some domains. This is the case when kexec booting from
-	 * Android kernels that support off mode for example.
-	 * Make sure it's set at least for core and per, otherwise
-	 * we currently will see lost GPIO interrupts for wlcore and
-	 * smsc911x at least if per hits retention during idle.
-	 */
 	if (!strncmp(pwrdm->name, "core", 4) ||
-	    !strncmp(pwrdm->name, "l4per", 5) ||
-	    !strncmp(pwrdm->name, "wkup", 4))
-		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_RET);
+	    !strncmp(pwrdm->name, "l4per", 5))
+		pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF);
 
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)

arch/arm/mach-omap2/pmic-cpcap.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pmic-cpcap.c - CPCAP-specific functions for the OPP code
+ *
+ * Adapted from Motorola Mapphone Android Linux kernel
+ * Copyright (C) 2011 Motorola, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "soc.h"
+#include "pm.h"
+#include "voltage.h"
+
+#include <linux/init.h>
+#include "vc.h"
+
+/**
+ * omap_cpcap_vsel_to_vdc - convert CPCAP VSEL value to microvolts DC
+ * @vsel: CPCAP VSEL value to convert
+ *
+ * Returns the microvolts DC that the CPCAP PMIC should generate when
+ * programmed with @vsel.
+ */
+static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
+{
+	if (vsel > 0x44)
+		vsel = 0x44;
+	return (((vsel * 125) + 6000)) * 100;
+}
+
+/**
+ * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the CPCAP PMIC to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv)
+{
+	if (uv < 600000)
+		uv = 600000;
+	else if (uv > 1450000)
+		uv = 1450000;
+	return DIV_ROUND_UP(uv - 600000, 12500);
+}
+
+static struct omap_voltdm_pmic omap_cpcap_core = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 900000,
+	.vddmax = 1350000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x02,
+	.volt_reg_addr = 0x00,
+	.cmd_reg_addr = 0x01,
+	.i2c_high_speed = false,
+	.vsel_to_uv = omap_cpcap_vsel_to_uv,
+	.uv_to_vsel = omap_cpcap_uv_to_vsel,
+};
+
+static struct omap_voltdm_pmic omap_cpcap_iva = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 900000,
+	.vddmax = 1350000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x44,
+	.volt_reg_addr = 0x0,
+	.cmd_reg_addr = 0x01,
+	.i2c_high_speed = false,
+	.vsel_to_uv = omap_cpcap_vsel_to_uv,
+	.uv_to_vsel = omap_cpcap_uv_to_vsel,
+};
+
+/**
+ * omap_max8952_vsel_to_vdc - convert MAX8952 VSEL value to microvolts DC
+ * @vsel: MAX8952 VSEL value to convert
+ *
+ * Returns the microvolts DC that the MAX8952 Regulator should generate when
+ * programmed with @vsel.
+ */
+static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
+{
+	if (vsel > 0x3F)
+		vsel = 0x3F;
+	return (((vsel * 100) + 7700)) * 100;
+}
+
+/**
+ * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+static unsigned char omap_max8952_uv_to_vsel(unsigned long uv)
+{
+	if (uv < 770000)
+		uv = 770000;
+	else if (uv > 1400000)
+		uv = 1400000;
+	return DIV_ROUND_UP(uv - 770000, 10000);
+}
+
+static struct omap_voltdm_pmic omap443x_max8952_mpu = {
+	.slew_rate = 16000,
+	.step_size = 10000,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 900000,
+	.vddmax = 1400000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x60,
+	.volt_reg_addr = 0x03,
+	.cmd_reg_addr = 0x03,
+	.i2c_high_speed = false,
+	.vsel_to_uv = omap_max8952_vsel_to_uv,
+	.uv_to_vsel = omap_max8952_uv_to_vsel,
+};
+
+/**
+ * omap_fan5355_vsel_to_vdc - convert FAN535503 VSEL value to microvolts DC
+ * @vsel: FAN535503 VSEL value to convert
+ *
+ * Returns the microvolts DC that the FAN535503 Regulator should generate when
+ * programmed with @vsel.
+ */
+static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
+{
+	/* Extract bits[5:0] */
+	vsel &= 0x3F;
+
+	return (((vsel * 125) + 7500)) * 100;
+}
+
+/**
+ * omap_fan535508_vsel_to_vdc - convert FAN535508 VSEL value to microvolts DC
+ * @vsel: FAN535508 VSEL value to convert
+ *
+ * Returns the microvolts DC that the FAN535508 Regulator should generate when
+ * programmed with @vsel.
+ */
+static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
+{
+	/* Extract bits[5:0] */
+	vsel &= 0x3F;
+
+	if (vsel > 0x37)
+		vsel = 0x37;
+	return (((vsel * 125) + 7500)) * 100;
+}
+
+
+/**
+ * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
+{
+	unsigned char vsel;
+	if (uv < 750000)
+		uv = 750000;
+	else if (uv > 1537500)
+		uv = 1537500;
+
+	vsel = DIV_ROUND_UP(uv - 750000, 12500);
+	return vsel | 0xC0;
+}
+
+/**
+ * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value
+ * @uv: microvolts DC to convert
+ *
+ * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * generate an output voltage equal to or greater than @uv microvolts DC.
+ */
+static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv)
+{
+	unsigned char vsel;
+	if (uv < 750000)
+		uv = 750000;
+	else if (uv > 1437500)
+		uv = 1437500;
+
+	vsel = DIV_ROUND_UP(uv - 750000, 12500);
+	return vsel | 0xC0;
+}
+
+/* fan5335-core */
+static struct omap_voltdm_pmic omap4_fan_core = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 850000,
+	.vddmax = 1375000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x4A,
+	.i2c_high_speed = false,
+	.volt_reg_addr = 0x01,
+	.cmd_reg_addr = 0x01,
+	.vsel_to_uv = omap_fan535508_vsel_to_uv,
+	.uv_to_vsel = omap_fan535508_uv_to_vsel,
+};
+
+/* fan5335 iva */
+static struct omap_voltdm_pmic omap4_fan_iva = {
+	.slew_rate = 4000,
+	.step_size = 12500,
+	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vddmin = 850000,
+	.vddmax = 1375000,
+	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr = 0x48,
+	.volt_reg_addr = 0x01,
+	.cmd_reg_addr = 0x01,
+	.i2c_high_speed = false,
+	.vsel_to_uv = omap_fan535503_vsel_to_uv,
+	.uv_to_vsel = omap_fan535503_uv_to_vsel,
+};
+
+int __init omap4_cpcap_init(void)
+{
+	struct voltagedomain *voltdm;
+
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return -ENODEV;
+
+	voltdm = voltdm_lookup("mpu");
+	omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
+
+	if (of_machine_is_compatible("motorola,droid-bionic")) {
+		voltdm = voltdm_lookup("mpu");
+		omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
+
+		voltdm = voltdm_lookup("mpu");
+		omap_voltage_register_pmic(voltdm, &omap_cpcap_iva);
+	} else {
+		voltdm = voltdm_lookup("core");
+		omap_voltage_register_pmic(voltdm, &omap4_fan_core);
+
+		voltdm = voltdm_lookup("iva");
+		omap_voltage_register_pmic(voltdm, &omap4_fan_iva);
+	}
+
+	return 0;
+}
+
+static int __init cpcap_late_init(void)
+{
+	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+
+	return 0;
+}
+omap_late_initcall(cpcap_late_init);

arch/arm/mach-omap2/prm44xx.c

@@ -745,7 +745,7 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 
 static int omap44xx_prm_late_init(void);
 
-void prm_save_context(void)
+static void prm_save_context(void)
 {
 	omap_prm_context.irq_enable =
 			omap4_prm_read_inst_reg(AM43XX_PRM_OCP_SOCKET_INST,
@@ -756,7 +756,7 @@ void prm_save_context(void)
 						omap4_prcm_irq_setup.pm_ctrl);
 }
 
-void prm_restore_context(void)
+static void prm_restore_context(void)
 {
 	omap4_prm_write_inst_reg(omap_prm_context.irq_enable,
 				 OMAP4430_PRM_OCP_SOCKET_INST,

arch/arm/mach-omap2/vc.c

@@ -26,6 +26,31 @@
 #include "scrm44xx.h"
 #include "control.h"
 
+#define OMAP4430_VDD_IVA_I2C_DISABLE		BIT(14)
+#define OMAP4430_VDD_MPU_I2C_DISABLE		BIT(13)
+#define OMAP4430_VDD_CORE_I2C_DISABLE		BIT(12)
+#define OMAP4430_VDD_IVA_PRESENCE		BIT(9)
+#define OMAP4430_VDD_MPU_PRESENCE		BIT(8)
+#define OMAP4430_AUTO_CTRL_VDD_IVA(x)		((x) << 4)
+#define OMAP4430_AUTO_CTRL_VDD_MPU(x)		((x) << 2)
+#define OMAP4430_AUTO_CTRL_VDD_CORE(x)		((x) << 0)
+#define OMAP4430_AUTO_CTRL_VDD_RET		2
+
+#define OMAP4430_VDD_I2C_DISABLE_MASK	\
+	(OMAP4430_VDD_IVA_I2C_DISABLE | \
+	 OMAP4430_VDD_MPU_I2C_DISABLE | \
+	 OMAP4430_VDD_CORE_I2C_DISABLE)
+
+#define OMAP4_VDD_DEFAULT_VAL	\
+	(OMAP4430_VDD_I2C_DISABLE_MASK | \
+	 OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \
+	 OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \
+	 OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \
+	 OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET))
+
+#define OMAP4_VDD_RET_VAL	\
+	(OMAP4_VDD_DEFAULT_VAL & ~OMAP4430_VDD_I2C_DISABLE_MASK)
+
 /**
  * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
  * @sa: bit for slave address
@@ -280,6 +305,26 @@ void omap3_vc_set_pmic_signaling(int core_next_state)
 	}
 }
 
+void omap4_vc_set_pmic_signaling(int core_next_state)
+{
+	struct voltagedomain *vd = vc.vd;
+	u32 val;
+
+	if (!vd)
+		return;
+
+	switch (core_next_state) {
+	case PWRDM_POWER_RET:
+		val = OMAP4_VDD_RET_VAL;
+		break;
+	default:
+		val = OMAP4_VDD_DEFAULT_VAL;
+		break;
+	}
+
+	vd->write(val, OMAP4_PRM_VOLTCTRL_OFFSET);
+}
+
 /*
  * Configure signal polarity for sys_clkreq and sys_off_mode pins
  * as the default values are wrong and can cause the system to hang
@@ -542,9 +587,19 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode)
 	writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME);
 }
 
+static void __init omap4_vc_init_pmic_signaling(struct voltagedomain *voltdm)
+{
+	if (vc.vd)
+		return;
+
+	vc.vd = voltdm;
+	voltdm->write(OMAP4_VDD_DEFAULT_VAL, OMAP4_PRM_VOLTCTRL_OFFSET);
+}
+
 /* OMAP4 specific voltage init functions */
 static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
 {
+	omap4_vc_init_pmic_signaling(voltdm);
 	omap4_set_timings(voltdm, true);
 	omap4_set_timings(voltdm, false);
 }
@@ -615,7 +670,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm)
 	const struct i2c_init_data *i2c_data;
 
 	if (!voltdm->pmic->i2c_high_speed) {
-		pr_warn("%s: only high speed supported!\n", __func__);
+		pr_info("%s: using bootloader low-speed timings\n", __func__);
 		return;
 	}
 

arch/arm/mach-omap2/vc.h

@@ -117,7 +117,7 @@ extern struct omap_vc_param omap4_iva_vc_data;
 extern struct omap_vc_param omap4_core_vc_data;
 
 void omap3_vc_set_pmic_signaling(int core_next_state);
-
+void omap4_vc_set_pmic_signaling(int core_next_state);
 
 void omap_vc_init_channel(struct voltagedomain *voltdm);
 int omap_vc_pre_scale(struct voltagedomain *voltdm,

arch/arm/mach-s3c24xx/s3c2416.c

@@ -113,7 +113,7 @@ void __init s3c2416_map_io(void)
 	/* initialize device information early */
 	s3c2416_default_sdhci0();
 	s3c2416_default_sdhci1();
-	s3c64xx_spi_setname("s3c2443-spi");
+	s3c24xx_spi_setname("s3c2443-spi");
 
 	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
 }

arch/arm/mach-s3c24xx/s3c2443.c

@@ -91,7 +91,7 @@ void __init s3c2443_map_io(void)
 	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
 	/* initialize device information early */
-	s3c64xx_spi_setname("s3c2443-spi");
+	s3c24xx_spi_setname("s3c2443-spi");
 
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }

arch/arm/mach-s3c24xx/spi-core.h

@@ -11,7 +11,7 @@
  */
 
 /* re-define device name depending on support. */
-static inline void s3c64xx_spi_setname(char *name)
+static inline void s3c24xx_spi_setname(char *name)
 {
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 	s3c64xx_device_spi0.name = name;

arch/arm/mach-s3c64xx/setup-usb-phy.c

@@ -73,7 +73,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev)
 	return 0;
 }
 
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
+int s3c_usb_phy_init(struct platform_device *pdev, int type)
 {
 	if (type == USB_PHY_TYPE_DEVICE)
 		return s3c_usb_otgphy_init(pdev);
@@ -81,7 +81,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type)
 	return -EINVAL;
 }
 
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+int s3c_usb_phy_exit(struct platform_device *pdev, int type)
 {
 	if (type == USB_PHY_TYPE_DEVICE)
 		return s3c_usb_otgphy_exit(pdev);

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -24,7 +24,6 @@
 #include "rcar-gen2.h"
 
 static const struct of_device_id cpg_matches[] __initconst = {
-	{ .compatible = "renesas,rcar-gen2-cpg-clocks", },
 	{ .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" },
 	{ .compatible = "renesas,r8a7744-cpg-mssr", .data = "extal" },
 	{ .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" },

arch/arm/mach-tegra/reset-handler.S

@@ -44,16 +44,16 @@ ENTRY(tegra_resume)
 	cmp	r6, #TEGRA20
 	beq	1f				@ Yes
 	/* Clear the flow controller flags for this CPU. */
-	cpu_to_csr_reg r1, r0
+	cpu_to_csr_reg r3, r0
 	mov32	r2, TEGRA_FLOW_CTRL_BASE
-	ldr	r1, [r2, r1]
+	ldr	r1, [r2, r3]
 	/* Clear event & intr flag */
 	orr	r1, r1, \
 		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
 	movw	r0, #0x3FFD	@ enable, cluster_switch, immed, bitmaps
 				@ & ext flags for CPU power mgnt
 	bic	r1, r1, r0
-	str	r1, [r2]
+	str	r1, [r2, r3]
 1:
 
 	mov32	r9, 0xc09

arch/arm/mach-tegra/sleep-tegra30.S

@@ -682,10 +682,12 @@ tegra30_enter_sleep:
 	dsb
 	ldr	r0, [r6, r2] /* memory barrier */
 
+	cmp	r10, #TEGRA30
 halted:
 	isb
 	dsb
-	wfi	/* CPU should be power gated here */
+	wfine	/* CPU should be power gated here */
+	wfeeq
 
 	/* !!!FIXME!!! Implement halt failure handler */
 	b	halted

arch/arm/mm/Kconfig

@@ -1044,7 +1044,7 @@ endif
 
 config CACHE_TAUROS2
 	bool "Enable the Tauros2 L2 cache controller"
-	depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
+	depends on (CPU_MOHAWK || CPU_PJ4)
 	default y
 	select OUTER_CACHE
 	help

arch/arm/plat-samsung/devs.c

@@ -1010,9 +1010,9 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
 	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_usb_hsotg);
 
 	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
+		npd->phy_init = s3c_usb_phy_init;
 	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
+		npd->phy_exit = s3c_usb_phy_exit;
 }
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 

arch/arm/plat-samsung/include/plat/usb-phy.h

@@ -7,7 +7,7 @@
 #ifndef __PLAT_SAMSUNG_USB_PHY_H
 #define __PLAT_SAMSUNG_USB_PHY_H __FILE__
 
-extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
-extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+extern int s3c_usb_phy_init(struct platform_device *pdev, int type);
+extern int s3c_usb_phy_exit(struct platform_device *pdev, int type);
 
 #endif /* __PLAT_SAMSUNG_USB_PHY_H */

arch/arm64/Kconfig.platforms

@@ -37,11 +37,12 @@ config ARCH_BCM2835
 	select PINCTRL
 	select PINCTRL_BCM2835
 	select ARM_AMBA
+	select ARM_GIC
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	help
-	  This enables support for the Broadcom BCM2837 SoC.
-	  This SoC is used in the Raspberry Pi 3 device.
+	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
+	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
 
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
@@ -188,6 +189,7 @@ config ARCH_QCOM
 
 config ARCH_REALTEK
 	bool "Realtek Platforms"
+	select RESET_CONTROLLER
 	help
 	  This enables support for the ARMv8 based Realtek chipsets,
 	  like the RTD1295.
@@ -212,6 +214,11 @@ config ARCH_ROCKCHIP
 	  This enables support for the ARMv8 based Rockchip chipsets,
 	  like the RK3368.
 
+config ARCH_S32
+	bool "NXP S32 SoC Family"
+	help
+	  This enables support for the NXP S32 family of processors.
+
 config ARCH_SEATTLE
 	bool "AMD Seattle SoC Family"
 	help

drivers/clk/Kconfig

@@ -299,6 +299,11 @@ config COMMON_CLK_STM32H7
 	help
 	  Support for stm32h7 SoC family clocks
 
+config COMMON_CLK_MMP2
+	def_bool COMMON_CLK && (MACH_MMP2_DT || MACH_MMP3_DT)
+	help
+	  Support for Marvell MMP2 and MMP3 SoC clocks
+
 config COMMON_CLK_BD718XX
 	tristate "Clock driver for ROHM BD718x7 PMIC"
 	depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528

drivers/clk/mmp/Makefile

@@ -8,7 +8,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
 obj-$(CONFIG_RESET_CONTROLLER) += reset.o
 
 obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
-obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
+obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o
 
 obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o

drivers/soc/tegra/flowctrl.c

@@ -91,8 +91,23 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
-		/* pwr gating on wfi */
-		reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+
+		if (tegra_get_chip_id() == TEGRA30) {
+			/*
+			 * The wfi doesn't work well on Tegra30 because
+			 * CPU hangs under some odd circumstances after
+			 * power-gating (like memory running off PLLP),
+			 * hence use wfe that is working perfectly fine.
+			 * Note that Tegra30 TRM doc clearly stands that
+			 * wfi should be used for the "Cluster Switching",
+			 * while wfe for the power-gating, just like it
+			 * is done on Tegra20.
+			 */
+			reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
+		} else {
+			/* pwr gating on wfi */
+			reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+		}
 		break;
 	}
 	reg |= FLOW_CTRL_CSR_INTR_FLAG;			/* clear intr flag */

arch/arm/mach-mmp/cputype.h → include/linux/soc/mmp/cputype.h

@@ -18,6 +18,8 @@
  * MMP2	     Z0	   0x560f5811   0x00F00410
  * MMP2      Z1    0x560f5811   0x00E00410
  * MMP2      A0    0x560f5811   0x00A0A610
+ * MMP3      A0    0x562f5842   0x00A02128
+ * MMP3      B0    0x562f5842   0x00B02128
  */
 
 extern unsigned int mmp_chip_id;
@@ -55,4 +57,29 @@ static inline int cpu_is_mmp2(void)
 #define cpu_is_mmp2()	(0)
 #endif
 
+#ifdef CONFIG_MACH_MMP3_DT
+static inline int cpu_is_mmp3(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58) &&
+		((mmp_chip_id & 0xffff) == 0x2128);
+}
+
+static inline int cpu_is_mmp3_a0(void)
+{
+	return (cpu_is_mmp3() &&
+		((mmp_chip_id & 0x00ff0000) == 0x00a00000));
+}
+
+static inline int cpu_is_mmp3_b0(void)
+{
+	return (cpu_is_mmp3() &&
+		((mmp_chip_id & 0x00ff0000) == 0x00b00000));
+}
+
+#else
+#define cpu_is_mmp3()		(0)
+#define cpu_is_mmp3_a0()	(0)
+#define cpu_is_mmp3_b0()	(0)
+#endif
+
 #endif /* __ASM_MACH_CPUTYPE_H */