Merge tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - add wireless type
   - properly document current direction

  Battery/charger driver changes:
   - new fuel-gauge/charger driver for RN5T618/RN5T619
   - new charger driver for BQ25980, BQ25975 and BQ25960
   - bq27xxx-battery: add support for TI bq34z100
   - gpio-charger: convert to GPIO descriptors
   - gpio-charger: add optional support for charge current limiting
   - max17040: add support for max17041, max17043, max17044
   - max17040: add support for max17048, max17049, max17058, max17059
   - smb347-charger: add DT support
   - smb247-charger: add SMB345 and SMB358 support
   - simple-battery: add temperature properties
   - lots of minor fixes, cleanups and DT binding YAML conversions

  Reset drivers:
   - ocelot: Add support for Sparx5"

* tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits)
  power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5
  power: supply: bq25980: Fix uninitialized wd_reg_val and overrun
  power: supply: ltc2941: Fix ptr to enum cast
  power: supply: test-power: revise parameter printing to use sprintf
  power: supply: charger-manager: fix incorrect check on charging_duration_ms
  power: supply: max17040: Fix ptr to enum cast
  power: supply: bq25980: Fix uninitialized wd_reg_val
  power: supply: bq25980: remove redundant zero check on ret
  power: reset: ocelot: Add support for Sparx5
  dt-bindings: reset: ocelot: Add Sparx5 support
  power: supply: sbs-battery: keep error code when get_property() fails
  power: supply: bq25980: Add support for the BQ259xx family
  dt-binding: bq25980: Add the bq25980 flash charger
  power: supply: fix spelling mistake "unprecise" -> "imprecise"
  power: supply: test_power: add missing newlines when printing parameters by sysfs
  power: supply: pm2301: drop duplicated i2c_device_id
  power: supply: charger-manager: drop unused charger assignment
  power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI
  power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI
  power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI
  ...

Documentation/ABI/testing/sysfs-class-power

@@ -34,7 +34,7 @@ Description:
 		Describes the main type of the supply.
 
 		Access: Read
-		Valid values: "Battery", "UPS", "Mains", "USB"
+		Valid values: "Battery", "UPS", "Mains", "USB", "Wireless"
 
 ===== Battery Properties =====
 
@@ -108,7 +108,8 @@ Description:
 		which they average readings to smooth out the reported value.
 
 		Access: Read
-		Valid values: Represented in microamps
+		Valid values: Represented in microamps. Negative values are used
+		for discharging batteries, positive values for charging batteries.
 
 What:		/sys/class/power_supply/<supply_name>/current_max
 Date:		October 2010
@@ -127,7 +128,8 @@ Description:
 		This value is not averaged/smoothed.
 
 		Access: Read
-		Valid values: Represented in microamps
+		Valid values: Represented in microamps. Negative values are used
+		for discharging batteries, positive values for charging batteries.
 
 What:		/sys/class/power_supply/<supply_name>/charge_control_limit
 Date:		Oct 2012

Documentation/devicetree/bindings/power/reset/ocelot-reset.txt

 Microsemi Ocelot reset controller
 
 The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
-SoC MIPS core.
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.
 
 Required Properties:
- - compatible: "mscc,ocelot-chip-reset"
+ - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset"
 
 Example:
 	reset@1070008 {

Documentation/devicetree/bindings/power/reset/reboot-mode.txt

-Generic reboot mode core map driver
-
-This driver get reboot mode arguments and call the write
-interface to store the magic value in special register
-or ram. Then the bootloader can read it and take different
-action according to the argument stored.
-
-All mode properties are vendor specific, it is a indication to tell
-the bootloader what to do when the system reboots, and should be named
-as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value).
-
-For example modes common on Android platform:
-- mode-normal: Normal reboot mode, system reboot with command "reboot".
-- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image.
-- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
-- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
-	       usually used in development.
-
-Example:
-	reboot-mode {
-		mode-normal = <BOOT_NORMAL>;
-		mode-recovery = <BOOT_RECOVERY>;
-		mode-bootloader = <BOOT_FASTBOOT>;
-		mode-loader = <BOOT_BL_DOWNLOAD>;
-	}

Documentation/devicetree/bindings/power/reset/reboot-mode.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic reboot mode core map
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  This driver get reboot mode arguments and call the write
+  interface to store the magic value in special register
+  or ram. Then the bootloader can read it and take different
+  action according to the argument stored.
+
+  All mode properties are vendor specific, it is a indication to tell
+  the bootloader what to do when the system reboots, and should be named
+  as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value).
+
+  For example, modes common Android platform are:
+    - normal: Normal reboot mode, system reboot with command "reboot".
+    - recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+    - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+    - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+              usually used in development.
+
+properties:
+  mode-normal:
+      $ref: /schemas/types.yaml#/definitions/uint32
+      description: |
+        Default value to set on a reboot if no command was provided.
+
+patternProperties:
+  "^mode-.*$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+examples:
+  - |
+    reboot-mode {
+      mode-normal = <0>;
+      mode-recovery = <1>;
+      mode-bootloader = <2>;
+      mode-loader = <3>;
+    };
+...

Documentation/devicetree/bindings/power/supply/battery.yaml

@@ -82,6 +82,27 @@ properties:
       An array containing the temperature in degree Celsius,
       for each of the battery capacity lookup table.
 
+  operating-range-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
 required:
   - compatible
 
@@ -130,6 +151,9 @@ examples:
         /* table for 10 degree Celsius */
         ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
         resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
       };
 
       charger@11 {

Documentation/devicetree/bindings/power/supply/bq25890.txt

@@ -33,6 +33,10 @@ Optional properties:
 - ti,thermal-regulation-threshold: integer, temperature above which the charge
     current is lowered, to avoid overheating (in degrees Celsius). If omitted,
     the default setting will be used (120 degrees);
+- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with
+    the battery;
+- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due
+    to expected voltage drop on in-series resistor;
 
 Example:
 

Documentation/devicetree/bindings/power/supply/bq25980.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+
+description: |
+  The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+  for use in high-power density portable electronics. These inductorless
+  switching chargers can provide over 97% efficiency by making use of the
+  switched capacitor architecture.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25980
+      - ti,bq25975
+      - ti,bq25960
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    description: |
+      Watchdog timer in milli seconds. 0 disables the watchdog.
+    default: 0
+    minimum: 0
+    maximum: 300000
+    enum: [ 0, 5000, 10000, 50000, 300000]
+
+  ti,sc-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 100000 micro volt step.
+    default: 17800000
+    minimum: 14000000
+    maximum: 22000000
+
+  ti,sc-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 50000 micro volt step.
+    minimum: 7000000
+    maximum: 12750000
+
+  ti,bypass-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-enable:
+    type: boolean
+    description: Enables bypass mode at boot time
+
+  interrupts:
+    description: |
+      Indicates that the device state has changed.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <4000000>;
+      constant-charge-voltage-max-microvolt = <8400000>;
+      precharge-current-microamp = <160000>;
+      charge-term-current-microamp = <160000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25980: charger@65 {
+          compatible = "ti,bq25980";
+          reg = <0x65>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+          ti,watchdog-timer = <0>;
+          ti,sc-ocp-limit-microamp = <2000000>;
+          ti,sc-ovp-limit-microvolt = <17800000>;
+          monitored-battery = <&bat>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/power/supply/bq27xxx.yaml

@@ -51,6 +51,7 @@ properties:
       - ti,bq27621
       - ti,bq27z561
       - ti,bq28z610
+      - ti,bq34z100
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/power/supply/charger-manager.txt

@@ -3,24 +3,32 @@ charger-manager bindings
 
 Required properties :
  - compatible : "charger-manager"
- - <>-supply : for regulator consumer
- - cm-num-chargers : number of chargers
+ - <>-supply : for regulator consumer, named according to cm-regulator-name
  - cm-chargers : name of chargers
  - cm-fuel-gauge : name of battery fuel gauge
  - subnode <regulator> :
 	- cm-regulator-name : name of charger regulator
 	- subnode <cable> :
-		- cm-cable-name : name of charger cable
+		- cm-cable-name : name of charger cable - one of USB, USB-HOST,
+			SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
+			PD, DOCK, JIG, or MECHANICAL
 		- cm-cable-extcon : name of extcon dev
 (optional)	- cm-cable-min : minimum current of cable
 (optional)	- cm-cable-max : maximum current of cable
 
 Optional properties :
  - cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode (enum polling_modes)
- - cm-poll-interval : polling interval
- - cm-battery-stat : battery status (enum data_source)
- - cm-fullbatt-* : data for full battery checking
+ - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
+	external power is connected, or 3 for when charging.  If not present,
+	then polling is disabled
+ - cm-poll-interval : polling interval (in ms)
+ - cm-battery-stat : battery status - 0 for battery always present, 1 for no
+	battery, 2 to check presence via fuel gauge, or 3 to check presence
+	via charger
+ - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
+ - cm-fullbatt-voltage : voltage (in uV) of full battery
+ - cm-fullbatt-soc : state of charge to consider as full battery
+ - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
  - cm-thermal-zone : name of external thermometer's thermal zone
  - cm-battery-* : threshold battery temperature for charging
 	-cold : critical cold temperature of battery for charging
@@ -29,6 +37,10 @@ Optional properties :
 	-temp-diff : temperature difference to allow recharging
  - cm-dis/charging-max = limits of charging duration
 
+Deprecated properties:
+ - cm-num-chargers
+ - cm-fullbatt-vchkdrop-ms
+
 Example :
 	charger-manager@0 {
 		compatible = "charger-manager";
@@ -39,13 +51,11 @@ Example :
 		cm-poll-mode = <1>;
 		cm-poll-interval = <30000>;
 
-		cm-fullbatt-vchkdrop-ms = <30000>;
 		cm-fullbatt-vchkdrop-volt = <150000>;
 		cm-fullbatt-soc = <100>;
 
 		cm-battery-stat = <3>;
 
-		cm-num-chargers = <3>;
 		cm-chargers = "charger0", "charger1", "charger2";
 
 		cm-fuel-gauge = "fuelgauge0";
@@ -71,7 +81,7 @@ Example :
 				cm-cable-max = <500000>;
 			};
 			cable@1 {
-				cm-cable-name = "TA";
+				cm-cable-name = "SDP";
 				cm-cable-extcon = "extcon-dev.0";
 				cm-cable-min = <650000>;
 				cm-cable-max = <675000>;

Documentation/devicetree/bindings/power/supply/gpio-charger.yaml

@@ -39,6 +39,25 @@ properties:
     maxItems: 1
     description: GPIO indicating the charging status
 
+  charge-current-limit-gpios:
+    minItems: 1
+    maxItems: 32
+    description: GPIOs used for current limiting
+
+  charge-current-limit-mapping:
+    description: List of tuples with current in uA and a GPIO bitmap (in
+      this order). The tuples must be provided in descending order of the
+      current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            Current limit in uA
+        - description:
+            Encoded GPIO setting. Bit 0 represents last GPIO from the
+            charge-current-limit-gpios property. Bit 1 second to last
+            GPIO and so on.
+
 required:
   - compatible
 
@@ -47,6 +66,12 @@ anyOf:
       - gpios
   - required:
       - charge-status-gpios
+  - required:
+      - charge-current-limit-gpios
+
+dependencies:
+  charge-current-limit-gpios: [ charge-current-limit-mapping ]
+  charge-current-limit-mapping: [ charge-current-limit-gpios ]
 
 additionalProperties: false
 
@@ -60,4 +85,10 @@ examples:
 
       gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
       charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+      charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+                                   <&gpioA 12 GPIO_ACTIVE_HIGH>;
+      charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+                                     <700000 0x01>, // 700 mA => GPIO A.12 high
+                                     <0 0x02>; // 0 mA => GPIO A.11 high
     };

Documentation/devicetree/bindings/power/supply/ingenic,battery.txt

-* Ingenic JZ47xx battery bindings
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-battery".
-- io-channels: phandle and IIO specifier pair to the IIO device.
-  Format described in iio-bindings.txt.
-- monitored-battery: phandle to a "simple-battery" compatible node.
-
-The "monitored-battery" property must be a phandle to a node using the format
-described in battery.txt, with the following properties being required:
-
-- voltage-min-design-microvolt: Drained battery voltage.
-- voltage-max-design-microvolt: Fully charged battery voltage.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-simple_battery: battery {
-	compatible = "simple-battery";
-	voltage-min-design-microvolt = <3600000>;
-	voltage-max-design-microvolt = <4200000>;
-};
-
-ingenic_battery {
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	monitored-battery = <&simple_battery>;
-};

Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx battery bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ingenic,jz4740-battery
+      - items:
+        - enum:
+          - ingenic,jz4725b-battery
+          - ingenic,jz4770-battery
+        - const: ingenic,jz4740-battery
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: battery
+
+  monitored-battery:
+    description: >
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - voltage-min-design-microvolt: drained battery voltage,
+      - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    simple_battery: battery {
+            compatible = "simple-battery";
+            voltage-min-design-microvolt = <3600000>;
+            voltage-max-design-microvolt = <4200000>;
+    };
+
+    ingenic-battery {
+            compatible = "ingenic,jz4740-battery";
+            io-channels = <&adc INGENIC_ADC_BATTERY>;
+            io-channel-names = "battery";
+            monitored-battery = <&simple_battery>;
+    };

Documentation/devicetree/bindings/power/supply/max17040_battery.txt

@@ -2,7 +2,9 @@ max17040_battery
 ~~~~~~~~~~~~~~~~
 
 Required properties :
- - compatible : "maxim,max17040" or "maxim,max77836-battery"
+ - compatible : "maxim,max17040", "maxim,max17041", "maxim,max17043",
+		"maxim,max17044", "maxim,max17048", "maxim,max17049",
+		"maxim,max17058", "maxim,max17059" or "maxim,max77836-battery"
  - reg: i2c slave address
 
 Optional properties :
@@ -11,6 +13,15 @@ Optional properties :
 				generated. Can be configured from 1 up to 32
 				(%). If skipped the power up default value of
 				4 (%) will be used.
+- maxim,double-soc : 		Certain devices return double the capacity.
+				Specify this boolean property to divide the
+				reported value in 2 and thus normalize it.
+				SOC == State of Charge == Capacity.
+- maxim,rcomp :			A value to compensate readings for various
+				battery chemistries and operating temperatures.
+				max17040,41 have 2 byte rcomp, default to
+				0x97 0x00. All other devices have one byte
+				rcomp, default to 0x97.
 - interrupts : 			Interrupt line see Documentation/devicetree/
 				bindings/interrupt-controller/interrupts.txt
 - wakeup-source :		This device has wakeup capabilities. Use this
@@ -31,3 +42,11 @@ Example:
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		wakeup-source;
 	};
+
+	battery-fuel-gauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+		maxim,rcomp = /bits/ 8 <0x56>;
+		maxim,alert-low-soc-level = <10>;
+		maxim,double-soc;
+	};

Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000,  500000,  700000, 1000000,
+                 1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000,  500000,  700000, 1000000,
+                 1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000,  500000,  700000,  900000, 1200000,
+                 1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000,  500000,  700000,  900000, 1200000,
+                 1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };

MAINTAINERS

@@ -5231,7 +5231,6 @@ F:	kernel/dma/
 
 DMA-BUF HEAPS FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
-R:	Andrew F. Davis <afd@ti.com>
 R:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
 R:	Liam Mark <lmark@codeaurora.org>
 R:	Laura Abbott <labbott@redhat.com>
@@ -11605,6 +11604,7 @@ M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/mips/mscc.txt
+F:	Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
 F:	arch/mips/boot/dts/mscc/
 F:	arch/mips/configs/generic/board-ocelot.config
 F:	arch/mips/generic/board-ocelot.c
@@ -17391,7 +17391,7 @@ S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
 TI BQ27XXX POWER SUPPLY DRIVER
-R:	Andrew F. Davis <afd@ti.com>
+R:	Dan Murphy <dmurphy@ti.com>
 F:	drivers/power/supply/bq27xxx_battery.c
 F:	drivers/power/supply/bq27xxx_battery_i2c.c
 F:	include/linux/power/bq27xxx_battery.h

arch/arm/mach-pxa/tosa.c

@@ -369,6 +369,15 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 /*
  * Tosa AC IN
  */
+static struct gpiod_lookup_table tosa_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static char *tosa_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
@@ -378,8 +387,6 @@ static char *tosa_ac_supplied_to[] = {
 static struct gpio_charger_platform_data tosa_power_data = {
 	.name			= "charger",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.gpio			= TOSA_GPIO_AC_IN,
-	.gpio_active_low	= 1,
 	.supplied_to		= tosa_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
 };
@@ -951,6 +958,7 @@ static void __init tosa_init(void)
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
 
 	gpiod_add_lookup_table(&tosa_udc_gpiod_table);
+	gpiod_add_lookup_table(&tosa_power_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-sa1100/collie.c

@@ -30,6 +30,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/power/gpio-charger.h>
 
 #include <video/sa1100fb.h>
@@ -131,16 +132,23 @@ static struct irda_platform_data collie_ir_data = {
 /*
  * Collie AC IN
  */
+static struct gpiod_lookup_table collie_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static char *collie_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
 };
 
-
 static struct gpio_charger_platform_data collie_power_data = {
 	.name			= "charger",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.gpio			= COLLIE_GPIO_AC_IN,
 	.supplied_to		= collie_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
 };
@@ -386,6 +394,8 @@ static void __init collie_init(void)
 
 	platform_scoop_config = &collie_pcmcia_config;
 
+	gpiod_add_lookup_table(&collie_power_gpiod_table);
+
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret) {
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");

drivers/power/reset/Kconfig

@@ -129,10 +129,10 @@ config POWER_RESET_QCOM_PON
 
 config POWER_RESET_OCELOT_RESET
 	bool "Microsemi Ocelot reset driver"
-	depends on MSCC_OCELOT || COMPILE_TEST
+	depends on MSCC_OCELOT || ARCH_SPARX5 || COMPILE_TEST
 	select MFD_SYSCON
 	help
-	  This driver supports restart for Microsemi Ocelot SoC.
+	  This driver supports restart for Microsemi Ocelot SoC and similar.
 
 config POWER_RESET_OXNAS
 	bool "OXNAS SoC restart driver"

drivers/power/reset/ocelot-reset.c

@@ -15,15 +15,20 @@
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 
+struct reset_props {
+	const char *syscon;
+	u32 protect_reg;
+	u32 vcore_protect;
+	u32 if_si_owner_bit;
+};
+
 struct ocelot_reset_context {
 	void __iomem *base;
 	struct regmap *cpu_ctrl;
+	const struct reset_props *props;
 	struct notifier_block restart_handler;
 };
 
-#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
-#define CORE_RST_PROTECT BIT(2)
-
 #define SOFT_CHIP_RST BIT(0)
 
 #define ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
@@ -31,7 +36,6 @@ struct ocelot_reset_context {
 #define IF_SI_OWNER_SISL			0
 #define IF_SI_OWNER_SIBM			1
 #define IF_SI_OWNER_SIMC			2
-#define IF_SI_OWNER_OFFSET			4
 
 static int ocelot_restart_handle(struct notifier_block *this,
 				 unsigned long mode, void *cmd)
@@ -39,15 +43,18 @@ static int ocelot_restart_handle(struct notifier_block *this,
 	struct ocelot_reset_context *ctx = container_of(this, struct
 							ocelot_reset_context,
 							restart_handler);
+	u32 if_si_owner_bit = ctx->props->if_si_owner_bit;
 
 	/* Make sure the core is not protected from reset */
-	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
-			   CORE_RST_PROTECT, 0);
+	regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+			   ctx->props->vcore_protect, 0);
 
 	/* Make the SI back to boot mode */
 	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
-			   IF_SI_OWNER_MASK << IF_SI_OWNER_OFFSET,
-			   IF_SI_OWNER_SIBM << IF_SI_OWNER_OFFSET);
+			   IF_SI_OWNER_MASK << if_si_owner_bit,
+			   IF_SI_OWNER_SIBM << if_si_owner_bit);
+
+	pr_emerg("Resetting SoC\n");
 
 	writel(SOFT_CHIP_RST, ctx->base);
 
@@ -72,9 +79,13 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	if (IS_ERR(ctx->base))
 		return PTR_ERR(ctx->base);
 
-	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
-	if (IS_ERR(ctx->cpu_ctrl))
+	ctx->props = device_get_match_data(dev);
+
+	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible(ctx->props->syscon);
+	if (IS_ERR(ctx->cpu_ctrl)) {
+		dev_err(dev, "No syscon map: %s\n", ctx->props->syscon);
 		return PTR_ERR(ctx->cpu_ctrl);
+	}
 
 	ctx->restart_handler.notifier_call = ocelot_restart_handle;
 	ctx->restart_handler.priority = 192;
@@ -85,9 +96,29 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	return err;
 }
 
+static const struct reset_props reset_props_ocelot = {
+	.syscon		 = "mscc,ocelot-cpu-syscon",
+	.protect_reg     = 0x20,
+	.vcore_protect   = BIT(2),
+	.if_si_owner_bit = 4,
+};
+
+static const struct reset_props reset_props_sparx5 = {
+	.syscon		 = "microchip,sparx5-cpu-syscon",
+	.protect_reg     = 0x84,
+	.vcore_protect   = BIT(10),
+	.if_si_owner_bit = 6,
+};
+
 static const struct of_device_id ocelot_reset_of_match[] = {
-	{ .compatible = "mscc,ocelot-chip-reset" },
-	{}
+	{
+		.compatible = "mscc,ocelot-chip-reset",
+		.data = &reset_props_ocelot
+	}, {
+		.compatible = "microchip,sparx5-chip-reset",
+		.data = &reset_props_sparx5
+	},
+	{ /*sentinel*/ }
 };
 
 static struct platform_driver ocelot_reset_driver = {

drivers/power/supply/Kconfig

@@ -164,7 +164,7 @@ config BATTERY_DS2782
 
 config BATTERY_LEGO_EV3
 	tristate "LEGO MINDSTORMS EV3 battery"
-	depends on OF && IIO && GPIOLIB
+	depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
 	help
 	  Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
 
@@ -367,10 +367,15 @@ config AXP288_FUEL_GAUGE
 config BATTERY_MAX17040
 	tristate "Maxim MAX17040 Fuel Gauge"
 	depends on I2C
+	select REGMAP_I2C
 	help
-	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
-	  in handheld and portable equipment. The MAX17040 is configured
-	  to operate with a single lithium cell
+	  Maxim models with ModelGauge are fuel-gauge systems for lithium-ion
+	  (Li+) batteries in handheld and portable equipment, including
+	  max17040, max17041, max17043, max17044, max17048, max17049, max17058,
+	  max17059. It is also included in some batteries like max77836.
+
+	  Driver supports reporting SOC (State of Charge, i.e capacity),
+	  voltage and configurable low-SOC wakeup interrupt.
 
 config BATTERY_MAX17042
 	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
@@ -631,13 +636,22 @@ config CHARGER_BQ25890
 	help
 	  Say Y to enable support for the TI BQ25890 battery charger.
 
+config CHARGER_BQ25980
+	tristate "TI BQ25980 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ25980, BQ25975 and BQ25960
+	  series of fast battery chargers.
+
 config CHARGER_SMB347
-	tristate "Summit Microelectronics SMB347 Battery Charger"
+	tristate "Summit Microelectronics SMB3XX Battery Charger"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	  Say Y to include support for Summit Microelectronics SMB347
-	  Battery Charger.
+	  Say Y to include support for Summit Microelectronics SMB345,
+	  SMB347 or SMB358 Battery Charger.
 
 config CHARGER_TPS65090
 	tristate "TPS65090 battery charger driver"
@@ -752,4 +766,12 @@ config CHARGER_WILCO
 	  information can be found in
 	  Documentation/ABI/testing/sysfs-class-power-wilco
 
+config RN5T618_POWER
+	tristate "RN5T618 charger/fuel gauge support"
+	depends on MFD_RN5T618
+	help
+	  Say Y here to have support for RN5T618 PMIC family fuel gauge and charger.
+	  This driver can also be built as a module. If so, the module will be
+	  called rn5t618_power.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

@@ -84,6 +84,7 @@ obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
 obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
 obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
 obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
+obj-$(CONFIG_CHARGER_BQ25980)	+= bq25980_charger.o
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
 obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
@@ -96,3 +97,4 @@ obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
 obj-$(CONFIG_CHARGER_BD70528)	+= bd70528-charger.o
 obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
 obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o
+obj-$(CONFIG_RN5T618_POWER)	+= rn5t618_power.o

drivers/power/supply/ab8500_fg.c

@@ -653,7 +653,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
 
 	/*
 	 * negative value for Discharging
-	 * convert 2's compliment into decimal
+	 * convert 2's complement into decimal
 	 */
 	if (high & 0x10)
 		val = (low | (high << 8) | 0xFFFFE000);
@@ -781,7 +781,7 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
 	if (ret < 0)
 		goto exit;
 
-	/* Check for sign bit in case of negative value, 2's compliment */
+	/* Check for sign bit in case of negative value, 2's complement */
 	if (high & 0x10)
 		val = (low | (med << 8) | (high << 16) | 0xFFE00000);
 	else

drivers/power/supply/bq24257_charger.c

@@ -1152,6 +1152,7 @@ static const struct of_device_id bq24257_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, bq24257_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id bq24257_acpi_match[] = {
 	{ "BQ242500", BQ24250 },
 	{ "BQ242510", BQ24251 },
@@ -1159,6 +1160,7 @@ static const struct acpi_device_id bq24257_acpi_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
+#endif
 
 static struct i2c_driver bq24257_driver = {
 	.driver = {

drivers/power/supply/bq2515x_charger.c

@@ -168,7 +168,7 @@ enum bq2515x_id {
  * @device_id: value of device_id
  * @mains_online: boolean value indicating power supply online
  *
- * @bq2515x_init_data init_data: charger initialization data structure
+ * @init_data: charger initialization data structure
  */
 struct bq2515x_device {
 	struct power_supply *mains;
@@ -188,7 +188,7 @@ struct bq2515x_device {
 	struct bq2515x_init_data init_data;
 };
 
-static struct reg_default bq25150_reg_defaults[] = {
+static const struct reg_default bq25150_reg_defaults[] = {
 	{BQ2515X_FLAG0, 0x0},
 	{BQ2515X_FLAG1, 0x0},
 	{BQ2515X_FLAG2, 0x0},
@@ -227,7 +227,7 @@ static struct reg_default bq25150_reg_defaults[] = {
 	{BQ2515X_DEVICE_ID, 0x20},
 };
 
-static struct reg_default bq25155_reg_defaults[] = {
+static const struct reg_default bq25155_reg_defaults[] = {
 	{BQ2515X_FLAG0, 0x0},
 	{BQ2515X_FLAG1, 0x0},
 	{BQ2515X_FLAG2, 0x0},
@@ -886,14 +886,14 @@ static int bq2515x_battery_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static enum power_supply_property bq2515x_battery_properties[] = {
+static const enum power_supply_property bq2515x_battery_properties[] = {
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 };
 
-static enum power_supply_property bq2515x_mains_properties[] = {
+static const enum power_supply_property bq2515x_mains_properties[] = {
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_HEALTH,
@@ -905,7 +905,7 @@ static enum power_supply_property bq2515x_mains_properties[] = {
 	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
 };
 
-static struct power_supply_desc bq2515x_mains_desc = {
+static const struct power_supply_desc bq2515x_mains_desc = {
 	.name			= "bq2515x-mains",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
 	.get_property		= bq2515x_mains_get_property,
@@ -915,7 +915,7 @@ static struct power_supply_desc bq2515x_mains_desc = {
 	.property_is_writeable	= bq2515x_power_supply_property_is_writeable,
 };
 
-static struct power_supply_desc bq2515x_battery_desc = {
+static const struct power_supply_desc bq2515x_battery_desc = {
 	.name			= "bq2515x-battery",
 	.type			= POWER_SUPPLY_TYPE_BATTERY,
 	.get_property		= bq2515x_battery_get_property,

drivers/power/supply/bq25890_charger.c

@@ -83,6 +83,8 @@ struct bq25890_init_data {
 	u8 boostf;	/* boost frequency		*/
 	u8 ilim_en;	/* enable ILIM pin		*/
 	u8 treg;	/* thermal regulation threshold */
+	u8 rbatcomp;	/* IBAT sense resistor value    */
+	u8 vclamp;	/* IBAT compensation voltage limit */
 };
 
 struct bq25890_state {
@@ -258,6 +260,8 @@ enum bq25890_table_ids {
 	TBL_VREG,
 	TBL_BOOSTV,
 	TBL_SYSVMIN,
+	TBL_VBATCOMP,
+	TBL_RBATCOMP,
 
 	/* lookup tables */
 	TBL_TREG,
@@ -299,6 +303,8 @@ static const union {
 	[TBL_VREG] =	{ .rt = {3840000, 4608000, 16000} },	 /* uV */
 	[TBL_BOOSTV] =	{ .rt = {4550000, 5510000, 64000} },	 /* uV */
 	[TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} },	 /* uV */
+	[TBL_VBATCOMP] ={ .rt = {0,        224000, 32000} },	 /* uV */
+	[TBL_RBATCOMP] ={ .rt = {0,        140000, 20000} },	 /* uOhm */
 
 	/* lookup tables */
 	[TBL_TREG] =	{ .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
@@ -648,7 +654,9 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 		{F_BOOSTI,	 bq->init_data.boosti},
 		{F_BOOSTF,	 bq->init_data.boostf},
 		{F_EN_ILIM,	 bq->init_data.ilim_en},
-		{F_TREG,	 bq->init_data.treg}
+		{F_TREG,	 bq->init_data.treg},
+		{F_BATCMP,	 bq->init_data.rbatcomp},
+		{F_VCLAMP,	 bq->init_data.vclamp},
 	};
 
 	ret = bq25890_chip_reset(bq);
@@ -859,11 +867,14 @@ static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
 		{"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
 
 		/* optional properties */
-		{"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg}
+		{"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg},
+		{"ti,ibatcomp-micro-ohms", true, TBL_RBATCOMP, &init->rbatcomp},
+		{"ti,ibatcomp-clamp-microvolt", true, TBL_VBATCOMP, &init->vclamp},
 	};
 
 	/* initialize data for optional properties */
 	init->treg = 3; /* 120 degrees Celsius */
+	init->rbatcomp = init->vclamp = 0; /* IBAT compensation disabled */
 
 	for (i = 0; i < ARRAY_SIZE(props); i++) {
 		ret = device_property_read_u32(bq->dev, props[i].name,
@@ -1073,11 +1084,13 @@ static const struct of_device_id bq25890_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, bq25890_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id bq25890_acpi_match[] = {
 	{"BQ258900", 0},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
+#endif
 
 static struct i2c_driver bq25890_driver = {
 	.driver = {

drivers/power/supply/bq25980_charger.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ */
+
+#ifndef BQ25980_CHARGER_H
+#define BQ25980_CHARGER_H
+
+#define BQ25980_MANUFACTURER "Texas Instruments"
+
+#define BQ25980_BATOVP			0x0
+#define BQ25980_BATOVP_ALM		0x1
+#define BQ25980_BATOCP			0x2
+#define BQ25980_BATOCP_ALM		0x3
+#define BQ25980_BATUCP_ALM		0x4
+#define BQ25980_CHRGR_CTRL_1	0x5
+#define BQ25980_BUSOVP			0x6
+#define BQ25980_BUSOVP_ALM		0x7
+#define BQ25980_BUSOCP			0x8
+#define BQ25980_BUSOCP_ALM		0x9
+#define BQ25980_TEMP_CONTROL		0xA
+#define BQ25980_TDIE_ALM		0xB
+#define BQ25980_TSBUS_FLT		0xC
+#define BQ25980_TSBAT_FLG		0xD
+#define BQ25980_VAC_CONTROL		0xE
+#define BQ25980_CHRGR_CTRL_2	0xF
+#define BQ25980_CHRGR_CTRL_3	0x10
+#define BQ25980_CHRGR_CTRL_4	0x11
+#define BQ25980_CHRGR_CTRL_5	0x12
+#define BQ25980_STAT1			0x13
+#define BQ25980_STAT2			0x14
+#define BQ25980_STAT3			0x15
+#define BQ25980_STAT4			0x16
+#define BQ25980_STAT5			0x17
+#define BQ25980_FLAG1			0x18
+#define BQ25980_FLAG2			0x19
+#define BQ25980_FLAG3			0x1A
+#define BQ25980_FLAG4			0x1B
+#define BQ25980_FLAG5			0x1C
+#define BQ25980_MASK1			0x1D
+#define BQ25980_MASK2			0x1E
+#define BQ25980_MASK3			0x1F
+#define BQ25980_MASK4			0x20
+#define BQ25980_MASK5			0x21
+#define BQ25980_DEVICE_INFO		0x22
+#define BQ25980_ADC_CONTROL1		0x23
+#define BQ25980_ADC_CONTROL2		0x24
+#define BQ25980_IBUS_ADC_MSB		0x25
+#define BQ25980_IBUS_ADC_LSB		0x26
+#define BQ25980_VBUS_ADC_MSB		0x27
+#define BQ25980_VBUS_ADC_LSB		0x28
+#define BQ25980_VAC1_ADC_MSB		0x29
+#define BQ25980_VAC1_ADC_LSB		0x2A
+#define BQ25980_VAC2_ADC_MSB		0x2B
+#define BQ25980_VAC2_ADC_LSB		0x2C
+#define BQ25980_VOUT_ADC_MSB		0x2D
+#define BQ25980_VOUT_ADC_LSB		0x2E
+#define BQ25980_VBAT_ADC_MSB		0x2F
+#define BQ25980_VBAT_ADC_LSB		0x30
+#define BQ25980_IBAT_ADC_MSB		0x31
+#define BQ25980_IBAT_ADC_LSB		0x32
+#define BQ25980_TSBUS_ADC_MSB		0x33
+#define BQ25980_TSBUS_ADC_LSB		0x34
+#define BQ25980_TSBAT_ADC_MSB		0x35
+#define BQ25980_TSBAT_ADC_LSB		0x36
+#define BQ25980_TDIE_ADC_MSB		0x37
+#define BQ25980_TDIE_ADC_LSB		0x38
+#define BQ25980_DEGLITCH_TIME		0x39
+#define BQ25980_CHRGR_CTRL_6	0x3A
+
+#define BQ25980_BUSOCP_STEP_uA		250000
+#define BQ25980_BUSOCP_OFFSET_uA	1000000
+
+#define BQ25980_BUSOCP_DFLT_uA		4250000
+#define BQ25975_BUSOCP_DFLT_uA		4250000
+#define BQ25960_BUSOCP_DFLT_uA		3250000
+
+#define BQ25980_BUSOCP_MIN_uA		1000000
+
+#define BQ25980_BUSOCP_SC_MAX_uA	5750000
+#define BQ25975_BUSOCP_SC_MAX_uA	5750000
+#define BQ25960_BUSOCP_SC_MAX_uA	3750000
+
+#define BQ25980_BUSOCP_BYP_MAX_uA	8500000
+#define BQ25975_BUSOCP_BYP_MAX_uA	8500000
+#define BQ25960_BUSOCP_BYP_MAX_uA	5750000
+
+#define BQ25980_BUSOVP_SC_STEP_uV	100000
+#define BQ25975_BUSOVP_SC_STEP_uV	50000
+#define BQ25960_BUSOVP_SC_STEP_uV	50000
+#define BQ25980_BUSOVP_SC_OFFSET_uV	14000000
+#define BQ25975_BUSOVP_SC_OFFSET_uV	7000000
+#define BQ25960_BUSOVP_SC_OFFSET_uV	7000000
+
+#define BQ25980_BUSOVP_BYP_STEP_uV	50000
+#define BQ25975_BUSOVP_BYP_STEP_uV	25000
+#define BQ25960_BUSOVP_BYP_STEP_uV	25000
+#define BQ25980_BUSOVP_BYP_OFFSET_uV	7000000
+#define BQ25975_BUSOVP_BYP_OFFSET_uV	3500000
+#define BQ25960_BUSOVP_BYP_OFFSET_uV	3500000
+
+#define BQ25980_BUSOVP_DFLT_uV		17800000
+#define BQ25980_BUSOVP_BYPASS_DFLT_uV	8900000
+#define BQ25975_BUSOVP_DFLT_uV		8900000
+#define BQ25975_BUSOVP_BYPASS_DFLT_uV	4450000
+#define BQ25960_BUSOVP_DFLT_uV		8900000
+
+#define BQ25980_BUSOVP_SC_MIN_uV	14000000
+#define BQ25975_BUSOVP_SC_MIN_uV	7000000
+#define BQ25960_BUSOVP_SC_MIN_uV	7000000
+#define BQ25980_BUSOVP_BYP_MIN_uV	7000000
+#define BQ25975_BUSOVP_BYP_MIN_uV	3500000
+#define BQ25960_BUSOVP_BYP_MIN_uV	3500000
+
+#define BQ25980_BUSOVP_SC_MAX_uV	22000000
+#define BQ25975_BUSOVP_SC_MAX_uV	12750000
+#define BQ25960_BUSOVP_SC_MAX_uV	12750000
+
+#define BQ25980_BUSOVP_BYP_MAX_uV	12750000
+#define BQ25975_BUSOVP_BYP_MAX_uV	6500000
+#define BQ25960_BUSOVP_BYP_MAX_uV	6500000
+
+#define BQ25980_BATOVP_STEP_uV		20000
+#define BQ25975_BATOVP_STEP_uV		10000
+#define BQ25960_BATOVP_STEP_uV		10000
+
+#define BQ25980_BATOVP_OFFSET_uV	7000000
+#define BQ25975_BATOVP_OFFSET_uV	3500000
+#define BQ25960_BATOVP_OFFSET_uV	3500000
+
+#define BQ25980_BATOVP_DFLT_uV		14000000
+#define BQ25975_BATOVP_DFLT_uV		8900000
+#define BQ25960_BATOVP_DFLT_uV		8900000
+
+#define BQ25980_BATOVP_MIN_uV		7000000
+#define BQ25975_BATOVP_MIN_uV		3500000
+#define BQ25960_BATOVP_MIN_uV		3500000
+
+#define BQ25980_BATOVP_MAX_uV		9540000
+#define BQ25975_BATOVP_MAX_uV		4770000
+#define BQ25960_BATOVP_MAX_uV		4770000
+
+#define BQ25980_BATOCP_STEP_uA		100000
+
+#define BQ25980_BATOCP_MASK		GENMASK(6, 0)
+
+#define BQ25980_BATOCP_DFLT_uA		8100000
+#define BQ25960_BATOCP_DFLT_uA		6100000
+
+#define BQ25980_BATOCP_MIN_uA		2000000
+
+#define BQ25980_BATOCP_MAX_uA		11000000
+#define BQ25975_BATOCP_MAX_uA		11000000
+#define BQ25960_BATOCP_MAX_uA		7000000
+
+#define BQ25980_ENABLE_HIZ		0xff
+#define BQ25980_DISABLE_HIZ		0x0
+#define BQ25980_EN_BYPASS		BIT(3)
+#define BQ25980_STAT1_OVP_MASK		(BIT(6) | BIT(5) | BIT(0))
+#define BQ25980_STAT3_OVP_MASK		(BIT(7) | BIT(6))
+#define BQ25980_STAT1_OCP_MASK		BIT(3)
+#define BQ25980_STAT2_OCP_MASK		(BIT(6) | BIT(1))
+#define BQ25980_STAT4_TFLT_MASK		GENMASK(5, 1)
+#define BQ25980_WD_STAT			BIT(0)
+#define BQ25980_PRESENT_MASK		GENMASK(4, 2)
+#define BQ25980_CHG_EN			BIT(4)
+#define BQ25980_EN_HIZ			BIT(6)
+#define BQ25980_ADC_EN			BIT(7)
+
+#define BQ25980_ADC_VOLT_STEP_uV        1000
+#define BQ25980_ADC_CURR_STEP_uA        1000
+#define BQ25980_ADC_POLARITY_BIT	BIT(7)
+
+#define BQ25980_WATCHDOG_MASK	GENMASK(4, 3)
+#define BQ25980_WATCHDOG_DIS	BIT(2)
+#define BQ25980_WATCHDOG_MAX	300000
+#define BQ25980_WATCHDOG_MIN	0
+#define BQ25980_NUM_WD_VAL	4
+
+#endif /* BQ25980_CHARGER_H */

drivers/power/supply/bq27xxx_battery.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * BQ27xxx battery driver
  *
@@ -9,14 +10,6 @@
  *
  * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
  *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
  * Datasheets:
  * https://www.ti.com/product/bq27000
  * https://www.ti.com/product/bq27200
@@ -45,6 +38,7 @@
  * https://www.ti.com/product/bq27621-g1
  * https://www.ti.com/product/bq27z561
  * https://www.ti.com/product/bq28z610
+ * https://www.ti.com/product/bq34z100-g1
  */
 
 #include <linux/device.h>
@@ -483,6 +477,26 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x22,
 		BQ27XXX_DM_REG_ROWS,
+	},
+	bq34z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x0c,
+		[BQ27XXX_REG_INT_TEMP] = 0x2a,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x0a,
+		[BQ27XXX_REG_FLAGS] = 0x0e,
+		[BQ27XXX_REG_TTE] = 0x18,
+		[BQ27XXX_REG_TTF] = 0x1a,
+		[BQ27XXX_REG_TTES] = 0x1e,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x06,
+		[BQ27XXX_REG_CYCT] = 0x2c,
+		[BQ27XXX_REG_AE] = 0x24,
+		[BQ27XXX_REG_SOC] = 0x02,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
 	};
 
 static enum power_supply_property bq27000_props[] = {
@@ -757,6 +771,27 @@ static enum power_supply_property bq28z610_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq34z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -854,13 +889,17 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 
 #define bq27z561_dm_regs 0
 #define bq28z610_dm_regs 0
-
-#define BQ27XXX_O_ZERO	0x00000001
-#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
-#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
-#define BQ27XXX_O_CFGUP	0x00000008
-#define BQ27XXX_O_RAM	0x00000010
-#define BQ27Z561_O_BITS	0x00000020
+#define bq34z100_dm_regs 0
+
+#define BQ27XXX_O_ZERO		BIT(0)
+#define BQ27XXX_O_OTDC		BIT(1) /* has OTC/OTD overtemperature flags */
+#define BQ27XXX_O_UTOT		BIT(2) /* has OT overtemperature flag */
+#define BQ27XXX_O_CFGUP		BIT(3)
+#define BQ27XXX_O_RAM		BIT(4)
+#define BQ27Z561_O_BITS		BIT(5)
+#define BQ27XXX_O_SOC_SI	BIT(6) /* SoC is single register */
+#define BQ27XXX_O_HAS_CI	BIT(7) /* has Capacity Inaccurate flag */
+#define BQ27XXX_O_MUL_CHEM	BIT(8) /* multiple chemistries supported */
 
 #define BQ27XXX_DATA(ref, key, opt) {		\
 	.opts = (opt),				\
@@ -878,8 +917,8 @@ static struct {
 	enum power_supply_property *props;
 	size_t props_size;
 } bq27xxx_chip_data[] = {
-	[BQ27000]   = BQ27XXX_DATA(bq27000,   0         , BQ27XXX_O_ZERO),
-	[BQ27010]   = BQ27XXX_DATA(bq27010,   0         , BQ27XXX_O_ZERO),
+	[BQ27000]   = BQ27XXX_DATA(bq27000,   0         , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
+	[BQ27010]   = BQ27XXX_DATA(bq27010,   0         , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
 	[BQ2750X]   = BQ27XXX_DATA(bq2750x,   0         , BQ27XXX_O_OTDC),
 	[BQ2751X]   = BQ27XXX_DATA(bq2751x,   0         , BQ27XXX_O_OTDC),
 	[BQ2752X]   = BQ27XXX_DATA(bq2752x,   0         , BQ27XXX_O_OTDC),
@@ -907,6 +946,8 @@ static struct {
 	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27Z561]  = BQ27XXX_DATA(bq27z561,  0         , BQ27Z561_O_BITS),
 	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
+	[BQ34Z100]  = BQ27XXX_DATA(bq34z100,  0         , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
+							  BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -1426,7 +1467,7 @@ static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
 {
 	int soc;
 
-	if (di->opts & BQ27XXX_O_ZERO)
+	if (di->opts & BQ27XXX_O_SOC_SI)
 		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true);
 	else
 		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
@@ -1664,7 +1705,7 @@ static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
 void bq27xxx_battery_update(struct bq27xxx_device_info *di)
 {
 	struct bq27xxx_reg_cache cache = {0, };
-	bool has_ci_flag = di->opts & BQ27XXX_O_ZERO;
+	bool has_ci_flag = di->opts & BQ27XXX_O_HAS_CI;
 	bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
 
 	cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
@@ -1772,8 +1813,6 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
 			status = POWER_SUPPLY_STATUS_CHARGING;
-		else if (power_supply_am_i_supplied(di->bat) > 0)
-			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
 	} else if (di->opts & BQ27Z561_O_BITS) {
@@ -1792,6 +1831,10 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_CHARGING;
 	}
 
+	if ((status == POWER_SUPPLY_STATUS_DISCHARGING) &&
+	    (power_supply_am_i_supplied(di->bat) > 0))
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
 	val->intval = status;
 
 	return 0;
@@ -1916,6 +1959,9 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
 		ret = bq27xxx_simple_value(di->cache.time_to_full, val);
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		if (di->opts & BQ27XXX_O_MUL_CHEM)
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		else
 			val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
@@ -1992,13 +2038,9 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 	psy_desc->external_power_changed = bq27xxx_external_power_changed;
 
 	di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
-	if (IS_ERR(di->bat)) {
-		if (PTR_ERR(di->bat) == -EPROBE_DEFER)
-			dev_dbg(di->dev, "failed to register battery, deferring probe\n");
-		else
-			dev_err(di->dev, "failed to register battery\n");
-		return PTR_ERR(di->bat);
-	}
+	if (IS_ERR(di->bat))
+		return dev_err_probe(di->dev, PTR_ERR(di->bat),
+				     "failed to register battery\n");
 
 	bq27xxx_battery_settings(di);
 	bq27xxx_battery_update(di);

drivers/power/supply/bq27xxx_battery_hdq.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * BQ27xxx battery monitor HDQ/1-wire driver
  *
  * Copyright (C) 2007-2017 Texas Instruments Incorporated - https://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>

drivers/power/supply/bq27xxx_battery_i2c.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * BQ27xxx battery monitor I2C driver
  *
  * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/i2c.h>
@@ -255,6 +247,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27621", BQ27621 },
 	{ "bq27z561", BQ27Z561 },
 	{ "bq28z610", BQ28Z610 },
+	{ "bq34z100", BQ34Z100 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -290,6 +283,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27621" },
 	{ .compatible = "ti,bq27z561" },
 	{ .compatible = "ti,bq28z610" },
+	{ .compatible = "ti,bq34z100" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);

drivers/power/supply/cpcap-battery.c

@@ -747,11 +747,8 @@ static int cpcap_battery_init_iio(struct cpcap_battery_ddata *ddata)
 	return 0;
 
 out_err:
-	if (error != -EPROBE_DEFER)
-		dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
-			error);
-
-	return error;
+	return dev_err_probe(ddata->dev, error,
+			     "could not initialize VBUS or ID IIO\n");
 }
 
 /* Calibrate coulomb counter */

drivers/power/supply/ds2780_battery.c

@@ -160,7 +160,7 @@ static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
 
 	/*
 	 * The voltage value is located in 10 bits across the voltage MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the voltage value is in bit 7 of the voltage MSB register
 	 * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
 	 * voltage MSB register
@@ -188,7 +188,7 @@ static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
 
 	/*
 	 * The temperature value is located in 10 bits across the temperature
-	 * MSB and LSB registers in two's compliment form
+	 * MSB and LSB registers in two's complement form
 	 * Sign bit of the temperature value is in bit 7 of the temperature
 	 * MSB register
 	 * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
@@ -241,7 +241,7 @@ static int ds2780_get_current(struct ds2780_device_info *dev_info,
 
 	/*
 	 * The current value is located in 16 bits across the current MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the current value is in bit 7 of the current MSB register
 	 * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
 	 * MSB register

drivers/power/supply/ds2781_battery.c

@@ -168,7 +168,7 @@ static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
 		return ret;
 	/*
 	 * The voltage value is located in 10 bits across the voltage MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the voltage value is in bit 7 of the voltage MSB register
 	 * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
 	 * voltage MSB register
@@ -197,7 +197,7 @@ static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
 		return ret;
 	/*
 	 * The temperature value is located in 10 bits across the temperature
-	 * MSB and LSB registers in two's compliment form
+	 * MSB and LSB registers in two's complement form
 	 * Sign bit of the temperature value is in bit 7 of the temperature
 	 * MSB register
 	 * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
@@ -242,7 +242,7 @@ static int ds2781_get_current(struct ds2781_device_info *dev_info,
 
 	/*
 	 * The current value is located in 16 bits across the current MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the current value is in bit 7 of the current MSB register
 	 * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
 	 * MSB register

drivers/power/supply/goldfish_battery.c

@@ -266,11 +266,13 @@ static const struct of_device_id goldfish_battery_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, goldfish_battery_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id goldfish_battery_acpi_match[] = {
 	{ "GFSH0001", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, goldfish_battery_acpi_match);
+#endif
 
 static struct platform_driver goldfish_battery_device = {
 	.probe		= goldfish_battery_probe,

drivers/power/supply/gpio-charger.c

@@ -5,7 +5,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/gpio.h> /* For legacy platform data */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -18,7 +17,13 @@
 
 #include <linux/power/gpio-charger.h>
 
+struct gpio_mapping {
+	u32 limit_ua;
+	u32 gpiodata;
+} __packed;
+
 struct gpio_charger {
+	struct device *dev;
 	unsigned int irq;
 	unsigned int charge_status_irq;
 	bool wakeup_enabled;
@@ -27,6 +32,11 @@ struct gpio_charger {
 	struct power_supply_desc charger_desc;
 	struct gpio_desc *gpiod;
 	struct gpio_desc *charge_status;
+
+	struct gpio_descs *current_limit_gpios;
+	struct gpio_mapping *current_limit_map;
+	u32 current_limit_map_size;
+	u32 charge_current_limit;
 };
 
 static irqreturn_t gpio_charger_irq(int irq, void *devid)
@@ -43,6 +53,35 @@ static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
 	return power_supply_get_drvdata(psy);
 }
 
+static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val)
+{
+	struct gpio_mapping mapping;
+	int ndescs = gpio_charger->current_limit_gpios->ndescs;
+	struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc;
+	int i;
+
+	if (!gpio_charger->current_limit_map_size)
+		return -EINVAL;
+
+	for (i = 0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua <= val)
+			break;
+	}
+	mapping = gpio_charger->current_limit_map[i];
+
+	for (i = 0; i < ndescs; i++) {
+		bool val = (mapping.gpiodata >> i) & 1;
+		gpiod_set_value_cansleep(gpios[ndescs-i-1], val);
+	}
+
+	gpio_charger->charge_current_limit = mapping.limit_ua;
+
+	dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n",
+		gpio_charger->charge_current_limit, val);
+
+	return 0;
+}
+
 static int gpio_charger_get_property(struct power_supply *psy,
 		enum power_supply_property psp, union power_supply_propval *val)
 {
@@ -58,6 +97,9 @@ static int gpio_charger_get_property(struct power_supply *psy,
 		else
 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = gpio_charger->charge_current_limit;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -65,6 +107,34 @@ static int gpio_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int gpio_charger_set_property(struct power_supply *psy,
+	enum power_supply_property psp, const union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return set_charge_current_limit(gpio_charger, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gpio_charger_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static enum power_supply_type gpio_charger_get_type(struct device *dev)
 {
 	const char *chargetype;
@@ -112,6 +182,61 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
 	return irq;
 }
 
+static int init_charge_current_limit(struct device *dev,
+				    struct gpio_charger *gpio_charger)
+{
+	int i, len;
+	u32 cur_limit = U32_MAX;
+
+	gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
+		"charge-current-limit", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio_charger->current_limit_gpios)) {
+		dev_err(dev, "error getting current-limit GPIOs\n");
+		return PTR_ERR(gpio_charger->current_limit_gpios);
+	}
+
+	if (!gpio_charger->current_limit_gpios)
+		return 0;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		NULL, 0);
+	if (len < 0)
+		return len;
+
+	if (len == 0 || len % 2) {
+		dev_err(dev, "invalid charge-current-limit-mapping length\n");
+		return -EINVAL;
+	}
+
+	gpio_charger->current_limit_map = devm_kmalloc_array(dev,
+		len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL);
+	if (!gpio_charger->current_limit_map)
+		return -ENOMEM;
+
+	gpio_charger->current_limit_map_size = len / 2;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		(u32*) gpio_charger->current_limit_map, len);
+	if (len < 0)
+		return len;
+
+	for (i=0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
+			dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n");
+			return -EINVAL;
+		}
+
+		cur_limit = gpio_charger->current_limit_map[i].limit_ua;
+	}
+
+	/* default to smallest current limitation for safety reasons */
+	len = gpio_charger->current_limit_map_size - 1;
+	set_charge_current_limit(gpio_charger,
+		gpio_charger->current_limit_map[len].limit_ua);
+
+	return 0;
+}
+
 /*
  * The entries will be overwritten by driver's probe routine depending
  * on the available features. This list ensures, that the array is big
@@ -120,6 +245,7 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
 static enum power_supply_property gpio_charger_properties[] = {
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 };
 
 static int gpio_charger_probe(struct platform_device *pdev)
@@ -131,7 +257,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	struct power_supply_desc *charger_desc;
 	struct gpio_desc *charge_status;
 	int charge_status_irq;
-	unsigned long flags;
 	int ret;
 	int num_props = 0;
 
@@ -143,40 +268,17 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
 	if (!gpio_charger)
 		return -ENOMEM;
+	gpio_charger->dev = dev;
 
 	/*
 	 * This will fetch a GPIO descriptor from device tree, ACPI or
 	 * boardfile descriptor tables. It's good to try this first.
 	 */
 	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
-
-	/*
-	 * Fallback to legacy platform data method, if no GPIO is specified
-	 * using boardfile descriptor tables.
-	 */
-	if (!gpio_charger->gpiod && pdata) {
-		/* Non-DT: use legacy GPIO numbers */
-		if (!gpio_is_valid(pdata->gpio)) {
-			dev_err(dev, "Invalid gpio pin in pdata\n");
-			return -EINVAL;
-		}
-		flags = GPIOF_IN;
-		if (pdata->gpio_active_low)
-			flags |= GPIOF_ACTIVE_LOW;
-		ret = devm_gpio_request_one(dev, pdata->gpio, flags,
-					    dev_name(dev));
-		if (ret) {
-			dev_err(dev, "Failed to request gpio pin: %d\n", ret);
-			return ret;
-		}
-		/* Then convert this to gpiod for now */
-		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
-	} else if (IS_ERR(gpio_charger->gpiod)) {
+	if (IS_ERR(gpio_charger->gpiod)) {
 		/* Just try again if this happens */
-		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		dev_err(dev, "error getting GPIO descriptor\n");
-		return PTR_ERR(gpio_charger->gpiod);
+		return dev_err_probe(dev, PTR_ERR(gpio_charger->gpiod),
+				     "error getting GPIO descriptor\n");
 	}
 
 	if (gpio_charger->gpiod) {
@@ -193,10 +295,22 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		num_props++;
 	}
 
+	ret = init_charge_current_limit(dev, gpio_charger);
+	if (ret < 0)
+		return ret;
+	if (gpio_charger->current_limit_map) {
+		gpio_charger_properties[num_props] =
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+		num_props++;
+	}
+
 	charger_desc = &gpio_charger->charger_desc;
 	charger_desc->properties = gpio_charger_properties;
 	charger_desc->num_properties = num_props;
 	charger_desc->get_property = gpio_charger_get_property;
+	charger_desc->set_property = gpio_charger_set_property;
+	charger_desc->property_is_writeable =
+					gpio_charger_property_is_writeable;
 
 	psy_cfg.of_node = dev->of_node;
 	psy_cfg.drv_data = gpio_charger;

drivers/power/supply/ingenic-battery.c

@@ -147,11 +147,9 @@ static int ingenic_battery_probe(struct platform_device *pdev)
 	psy_cfg.of_node = dev->of_node;
 
 	bat->battery = devm_power_supply_register(dev, desc, &psy_cfg);
-	if (IS_ERR(bat->battery)) {
-		if (PTR_ERR(bat->battery) != -EPROBE_DEFER)
-			dev_err(dev, "Unable to register battery\n");
-		return PTR_ERR(bat->battery);
-	}
+	if (IS_ERR(bat->battery))
+		return dev_err_probe(dev, PTR_ERR(bat->battery),
+				     "Unable to register battery\n");
 
 	ret = power_supply_get_battery_info(bat->battery, &bat->info);
 	if (ret) {

drivers/power/supply/lego_ev3_battery.c

@@ -166,27 +166,21 @@ static int lego_ev3_battery_probe(struct platform_device *pdev)
 
 	batt->iio_v = devm_iio_channel_get(dev, "voltage");
 	err = PTR_ERR_OR_ZERO(batt->iio_v);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get voltage iio channel\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get voltage iio channel\n");
 
 	batt->iio_i = devm_iio_channel_get(dev, "current");
 	err = PTR_ERR_OR_ZERO(batt->iio_i);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get current iio channel\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get current iio channel\n");
 
 	batt->rechargeable_gpio = devm_gpiod_get(dev, "rechargeable", GPIOD_IN);
 	err = PTR_ERR_OR_ZERO(batt->rechargeable_gpio);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get rechargeable gpio\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get rechargeable gpio\n");
 
 	/*
 	 * The rechargeable battery indication switch cannot be changed without

drivers/power/supply/ltc2941-battery-gauge.c

@@ -473,7 +473,8 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 
 	np = of_node_get(client->dev.of_node);
 
-	info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
+	info->id = (enum ltc294x_id) (uintptr_t) of_device_get_match_data(
+							&client->dev);
 	info->supply_desc.name = np->name;
 
 	/* r_sense can be negative, when sense+ is connected to the battery

drivers/power/supply/pm2301_charger.c

@@ -104,11 +104,6 @@ static int pm2xxx_charger_current_map[] = {
 	3000,
 };
 
-static const struct i2c_device_id pm2xxx_ident[] = {
-	{ "pm2301", 0 },
-	{ }
-};
-
 static void set_lpn_pin(struct pm2xxx_charger *pm2)
 {
 	if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) {
@@ -396,7 +391,7 @@ static int pm2_int_reg3(void *pm2_data, int val)
 
 	if (val & (PM2XXX_INT4_ITCHARGINGON)) {
 		dev_dbg(pm2->dev ,
-			"chargind operation has started\n");
+			"charging operation has started\n");
 	}
 
 	if (val & (PM2XXX_INT4_ITVRESUME)) {

drivers/power/supply/power_supply_core.c

@@ -579,6 +579,12 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	info->charge_term_current_ua         = -EINVAL;
 	info->constant_charge_current_max_ua = -EINVAL;
 	info->constant_charge_voltage_max_uv = -EINVAL;
+	info->temp_ambient_alert_min         = INT_MIN;
+	info->temp_ambient_alert_max         = INT_MAX;
+	info->temp_alert_min                 = INT_MIN;
+	info->temp_alert_max                 = INT_MAX;
+	info->temp_min                       = INT_MIN;
+	info->temp_max                       = INT_MAX;
 	info->factory_internal_resistance_uohm  = -EINVAL;
 	info->resist_table = NULL;
 
@@ -639,6 +645,19 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	of_property_read_u32(battery_np, "factory-internal-resistance-micro-ohms",
 			     &info->factory_internal_resistance_uohm);
 
+	of_property_read_u32_index(battery_np, "ambient-celsius",
+				   0, &info->temp_ambient_alert_min);
+	of_property_read_u32_index(battery_np, "ambient-celsius",
+				   1, &info->temp_ambient_alert_max);
+	of_property_read_u32_index(battery_np, "alert-celsius",
+				   0, &info->temp_alert_min);
+	of_property_read_u32_index(battery_np, "alert-celsius",
+				   1, &info->temp_alert_max);
+	of_property_read_u32_index(battery_np, "operating-range-celsius",
+				   0, &info->temp_min);
+	of_property_read_u32_index(battery_np, "operating-range-celsius",
+				   1, &info->temp_max);
+
 	len = of_property_count_u32_elems(battery_np, "ocv-capacity-celsius");
 	if (len < 0 && len != -EINVAL) {
 		err = len;

drivers/power/supply/power_supply_sysfs.c

@@ -56,6 +56,7 @@ static const char * const POWER_SUPPLY_TYPE_TEXT[] = {
 	[POWER_SUPPLY_TYPE_USB_PD]		= "USB_PD",
 	[POWER_SUPPLY_TYPE_USB_PD_DRP]		= "USB_PD_DRP",
 	[POWER_SUPPLY_TYPE_APPLE_BRICK_ID]	= "BrickID",
+	[POWER_SUPPLY_TYPE_WIRELESS]		= "Wireless",
 };
 
 static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = {

drivers/power/supply/rt9455_charger.c

@@ -1731,11 +1731,13 @@ static const struct of_device_id rt9455_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rt9455_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id rt9455_i2c_acpi_match[] = {
 	{ "RT945500", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
+#endif
 
 static struct i2c_driver rt9455_driver = {
 	.probe		= rt9455_probe,

drivers/power/supply/sbs-battery.c

@@ -193,7 +193,6 @@ struct sbs_info {
 	struct power_supply		*power_supply;
 	bool				is_present;
 	struct gpio_desc		*gpio_detect;
-	bool				enable_detection;
 	bool				charger_broadcasts;
 	int				last_state;
 	int				poll_time;
@@ -480,37 +479,6 @@ static bool sbs_bat_needs_calibration(struct i2c_client *client)
 	return !!(ret & BIT(7));
 }
 
-static int sbs_get_battery_presence_and_health(
-	struct i2c_client *client, enum power_supply_property psp,
-	union power_supply_propval *val)
-{
-	int ret;
-
-	/* Dummy command; if it succeeds, battery is present. */
-	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
-
-	if (ret < 0) { /* battery not present*/
-		if (psp == POWER_SUPPLY_PROP_PRESENT) {
-			val->intval = 0;
-			return 0;
-		}
-		return ret;
-	}
-
-	if (psp == POWER_SUPPLY_PROP_PRESENT)
-		val->intval = 1; /* battery present */
-	else { /* POWER_SUPPLY_PROP_HEALTH */
-		if (sbs_bat_needs_calibration(client)) {
-			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
-		} else {
-			/* SBS spec doesn't have a general health command. */
-			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
-		}
-	}
-
-	return 0;
-}
-
 static int sbs_get_ti_battery_presence_and_health(
 	struct i2c_client *client, enum power_supply_property psp,
 	union power_supply_propval *val)
@@ -569,6 +537,41 @@ static int sbs_get_ti_battery_presence_and_health(
 	return 0;
 }
 
+static int sbs_get_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
+		return sbs_get_ti_battery_presence_and_health(client, psp, val);
+
+	/* Dummy command; if it succeeds, battery is present. */
+	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+	if (ret < 0) { /* battery not present*/
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = 0;
+			return 0;
+		}
+		return ret;
+	}
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT)
+		val->intval = 1; /* battery present */
+	else { /* POWER_SUPPLY_PROP_HEALTH */
+		if (sbs_bat_needs_calibration(client)) {
+			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+		} else {
+			/* SBS spec doesn't have a general health command. */
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	return 0;
+}
+
 static int sbs_get_battery_property(struct i2c_client *client,
 	int reg_offset, enum power_supply_property psp,
 	union power_supply_propval *val)
@@ -871,12 +874,7 @@ static int sbs_get_property(struct power_supply *psy,
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
 	case POWER_SUPPLY_PROP_HEALTH:
-		if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
-			ret = sbs_get_ti_battery_presence_and_health(client,
-								     psp, val);
-		else
-			ret = sbs_get_battery_presence_and_health(client, psp,
-								  val);
+		ret = sbs_get_battery_presence_and_health(client, psp, val);
 
 		/* this can only be true if no gpio is used */
 		if (psp == POWER_SUPPLY_PROP_PRESENT)
@@ -967,12 +965,15 @@ static int sbs_get_property(struct power_supply *psy,
 		return -EINVAL;
 	}
 
-	if (!chip->enable_detection)
-		goto done;
+	if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
+		bool old_present = chip->is_present;
+		union power_supply_propval val;
+		int err = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+
+		sbs_update_presence(chip, !err && val.intval);
 
-	if (!chip->gpio_detect &&
-		chip->is_present != (ret >= 0)) {
-		sbs_update_presence(chip, (ret >= 0));
+		if (old_present != chip->is_present)
 			power_supply_changed(chip->power_supply);
 	}
 
@@ -980,19 +981,14 @@ static int sbs_get_property(struct power_supply *psy,
 	if (!ret) {
 		/* Convert units to match requirements for power supply class */
 		sbs_unit_adjustment(client, psp, val);
-	}
-
 		dev_dbg(&client->dev,
-		"%s: property = %d, value = %x\n", __func__, psp, val->intval);
-
-	if (ret && chip->is_present)
-		return ret;
-
+			"%s: property = %d, value = %x\n", __func__,
+			psp, val->intval);
+	} else if (!chip->is_present)  {
 		/* battery not present, so return NODATA for properties */
-	if (ret)
-		return -ENODATA;
-
-	return 0;
+		ret = -ENODATA;
+	}
+	return ret;
 }
 
 static void sbs_supply_changed(struct sbs_info *chip)
@@ -1098,7 +1094,6 @@ static int sbs_probe(struct i2c_client *client)
 
 	chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
 	chip->client = client;
-	chip->enable_detection = false;
 	psy_cfg.of_node = client->dev.of_node;
 	psy_cfg.drv_data = chip;
 	chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
@@ -1159,15 +1154,19 @@ static int sbs_probe(struct i2c_client *client)
 	 * to the battery.
 	 */
 	if (!(force_load || chip->gpio_detect)) {
-		rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+		union power_supply_propval val;
 
-		if (rc < 0) {
-			dev_err(&client->dev, "%s: Failed to get device status\n",
-				__func__);
+		rc = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+		if (rc < 0 || !val.intval) {
+			dev_err(&client->dev, "Failed to get present status\n");
+			rc = -ENODEV;
 			goto exit_psupply;
 		}
 	}
 
+	INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+
 	chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
 						   &psy_cfg);
 	if (IS_ERR(chip->power_supply)) {
@@ -1180,10 +1179,6 @@ static int sbs_probe(struct i2c_client *client)
 	dev_info(&client->dev,
 		"%s: battery gas gauge device registered\n", client->name);
 
-	INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
-
-	chip->enable_detection = true;
-
 	return 0;
 
 exit_psupply:

include/dt-bindings/power/summit,smb347-charger.h

+/* SPDX-License-Identifier: (GPL-2.0-or-later or MIT) */
+/*
+ * Author: David Heidelberg <david@ixit.cz>
+ */
+
+#ifndef _DT_BINDINGS_SMB347_CHARGER_H
+#define _DT_BINDINGS_SMB347_CHARGER_H
+
+/* Charging compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_NONE	0
+#define SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT	1
+#define SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE	2
+
+/* Charging enable control */
+#define SMB3XX_CHG_ENABLE_SW			0
+#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW	1
+#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH	2
+
+#endif

include/linux/power/bq27xxx_battery.h

@@ -32,6 +32,7 @@ enum bq27xxx_chip {
 	BQ27621,
 	BQ27Z561,
 	BQ28Z610,
+	BQ34Z100,
 };
 
 struct bq27xxx_device_info;

include/linux/power/gpio-charger.h

@@ -13,18 +13,12 @@
  * struct gpio_charger_platform_data - platform_data for gpio_charger devices
  * @name:		Name for the chargers power_supply device
  * @type:		Type of the charger
- * @gpio:		GPIO which is used to indicate the chargers status
- * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
  * @supplied_to:	Array of battery names to which this chargers supplies power
  * @num_supplicants:	Number of entries in the supplied_to array
  */
 struct gpio_charger_platform_data {
 	const char *name;
 	enum power_supply_type type;
-
-	int gpio;
-	int gpio_active_low;
-
 	char **supplied_to;
 	size_t num_supplicants;
 };