Skip to content

L
linux
Commit 3869f806 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge git://github.com/Jkirsher/net-next

parents f9b491ec 0ccb974d
Hide whitespace changes
Inline Side-by-side
Showing with 358 additions and 227 deletions
drivers/net/ethernet/intel/e1000/e1000_main.c
View file @ 3869f806
......@@ -1814,8 +1814,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
rctl |= E1000_RCTL_BAM | E1000_RCTL_LBM_NO |
E1000_RCTL_RDMTS_HALF |
(hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
if (hw->tbi_compatibility_on == 1)
......@@ -1917,7 +1917,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
/* Enable Receives */
ew32(RCTL, rctl);
ew32(RCTL, rctl | E1000_RCTL_EN);
}
/**
......
drivers/net/ethernet/intel/ixgbe/ixgbe.h
View file @ 3869f806
......@@ -301,26 +301,29 @@ struct ixgbe_ring_container {
*/
struct ixgbe_q_vector {
struct ixgbe_adapter *adapter;
unsigned int v_idx; /* index of q_vector within array, also used for
* finding the bit in EICR and friends that
* represents the vector for this ring */
#ifdef CONFIG_IXGBE_DCA
int cpu; /* CPU for DCA */
#endif
struct napi_struct napi;
u16 v_idx; /* index of q_vector within array, also used for
* finding the bit in EICR and friends that
* represents the vector for this ring */
u16 itr; /* Interrupt throttle rate written to EITR */
struct ixgbe_ring_container rx, tx;
u32 eitr;
struct napi_struct napi;
cpumask_var_t affinity_mask;
char name[IFNAMSIZ + 9];
};
/* Helper macros to switch between ints/sec and what the register uses.
* And yes, it's the same math going both ways. The lowest value
* supported by all of the ixgbe hardware is 8.
/*
* microsecond values for various ITR rates shifted by 2 to fit itr register
* with the first 3 bits reserved 0
*/
#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
#define IXGBE_MIN_RSC_ITR 24
#define IXGBE_100K_ITR 40
#define IXGBE_20K_ITR 200
#define IXGBE_10K_ITR 400
#define IXGBE_8K_ITR 500
static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring)
{
......
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
View file @ 3869f806
......@@ -358,7 +358,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
u32 fctrl_reg;
u32 rmcs_reg;
u32 reg;
u32 rx_pba_size;
u32 link_speed = 0;
bool link_up;
......@@ -461,16 +460,13 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
/* Set up and enable Rx high/low water mark thresholds, enable XON. */
if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
reg = (rx_pba_size - hw->fc.low_water) << 6;
reg = hw->fc.low_water << 6;
if (hw->fc.send_xon)
reg |= IXGBE_FCRTL_XONE;
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg);
reg = (rx_pba_size - hw->fc.high_water) << 6;
reg = hw->fc.high_water[packetbuf_num] << 6;
reg |= IXGBE_FCRTH_FCEN;
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg);
......
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
View file @ 3869f806
......@@ -1932,7 +1932,6 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
s32 ret_val = 0;
u32 mflcn_reg, fccfg_reg;
u32 reg;
u32 rx_pba_size;
u32 fcrtl, fcrth;
#ifdef CONFIG_DCB
......@@ -2012,11 +2011,8 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
fcrth = (rx_pba_size - hw->fc.high_water) << 10;
fcrtl = (rx_pba_size - hw->fc.low_water) << 10;
fcrth = hw->fc.high_water[packetbuf_num] << 10;
fcrtl = hw->fc.low_water << 10;
if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
fcrth |= IXGBE_FCRTH_FCEN;
......@@ -2293,7 +2289,9 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
* Validate the water mark configuration. Zero water marks are invalid
* because it causes the controller to just blast out fc packets.
*/
if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
if (!hw->fc.low_water ||
!hw->fc.high_water[packetbuf_num] ||
!hw->fc.pause_time) {
hw_dbg(hw, "Invalid water mark configuration\n");
ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
goto out;
......
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
View file @ 3869f806
......@@ -36,7 +36,6 @@
#define IXGBE_MAX_PACKET_BUFFERS 8
#define MAX_USER_PRIORITY 8
#define MAX_TRAFFIC_CLASS 8
#define MAX_BW_GROUP 8
#define BW_PERCENT 100
......
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
View file @ 3869f806
......@@ -191,7 +191,7 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
*/
s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
{
u32 reg, rx_pba_size;
u32 reg;
u8 i;
if (pfc_en) {
......@@ -222,9 +222,8 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
*/
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
int enabled = pfc_en & (1 << i);
rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
reg = (rx_pba_size - hw->fc.low_water) << 10;
reg = hw->fc.low_water << 10;
if (enabled == pfc_enabled_tx ||
enabled == pfc_enabled_full)
......@@ -232,7 +231,7 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg);
reg = (rx_pba_size - hw->fc.high_water) << 10;
reg = hw->fc.high_water[i] << 10;
if (enabled == pfc_enabled_tx ||
enabled == pfc_enabled_full)
reg |= IXGBE_FCRTH_FCEN;
......
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
View file @ 3869f806
......@@ -210,21 +210,19 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
*/
s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en)
{
u32 i, reg, rx_pba_size;
u32 i, reg;
/* Configure PFC Tx thresholds per TC */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
int enabled = pfc_en & (1 << i);
rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
reg = (rx_pba_size - hw->fc.low_water) << 10;
reg = hw->fc.low_water << 10;
if (enabled)
reg |= IXGBE_FCRTL_XONE;
IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
reg = (rx_pba_size - hw->fc.high_water) << 10;
reg = hw->fc.high_water[i] << 10;
if (enabled)
reg |= IXGBE_FCRTH_FCEN;
IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
......
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
View file @ 3869f806
......@@ -2026,39 +2026,20 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit;
/* only valid if in constant ITR mode */
switch (adapter->rx_itr_setting) {
case 0:
/* throttling disabled */
ec->rx_coalesce_usecs = 0;
break;
case 1:
/* dynamic ITR mode */
ec->rx_coalesce_usecs = 1;
break;
default:
/* fixed interrupt rate mode */
ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
break;
}
if (adapter->rx_itr_setting <= 1)
ec->rx_coalesce_usecs = adapter->rx_itr_setting;
else
ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
/* if in mixed tx/rx queues per vector mode, report only rx settings */
if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
return 0;
/* only valid if in constant ITR mode */
switch (adapter->tx_itr_setting) {
case 0:
/* throttling disabled */
ec->tx_coalesce_usecs = 0;
break;
case 1:
/* dynamic ITR mode */
ec->tx_coalesce_usecs = 1;
break;
default:
ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
break;
}
if (adapter->tx_itr_setting <= 1)
ec->tx_coalesce_usecs = adapter->tx_itr_setting;
else
ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
return 0;
}
......@@ -2077,10 +2058,9 @@ static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter,
/* if interrupt rate is too high then disable RSC */
if (ec->rx_coalesce_usecs != 1 &&
ec->rx_coalesce_usecs <= 1000000/IXGBE_MAX_RSC_INT_RATE) {
ec->rx_coalesce_usecs <= (IXGBE_MIN_RSC_ITR >> 2)) {
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
e_info(probe, "rx-usecs set too low, "
"disabling RSC\n");
e_info(probe, "rx-usecs set too low, disabling RSC\n");
adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
return true;
}
......@@ -2088,8 +2068,7 @@ static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter,
/* check the feature flag value and enable RSC if necessary */
if ((netdev->features & NETIF_F_LRO) &&
!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
e_info(probe, "rx-usecs set to %d, "
"re-enabling RSC\n",
e_info(probe, "rx-usecs set to %d, re-enabling RSC\n",
ec->rx_coalesce_usecs);
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
return true;
......@@ -2104,97 +2083,59 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_q_vector *q_vector;
int i;
int num_vectors;
u16 tx_itr_param, rx_itr_param;
bool need_reset = false;
/* don't accept tx specific changes if we've got mixed RxTx vectors */
if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count
&& ec->tx_coalesce_usecs)
&& ec->tx_coalesce_usecs)
return -EINVAL;
if (ec->tx_max_coalesced_frames_irq)
adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq;
if (ec->rx_coalesce_usecs > 1) {
/* check the limits */
if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
(1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
return -EINVAL;
/* check the old value and enable RSC if necessary */
need_reset = ixgbe_update_rsc(adapter, ec);
/* store the value in ints/second */
adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) ||
(ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)))
return -EINVAL;
/* static value of interrupt rate */
adapter->rx_itr_setting = adapter->rx_eitr_param;
/* clear the lower bit as its used for dynamic state */
adapter->rx_itr_setting &= ~1;
} else if (ec->rx_coalesce_usecs == 1) {
/* check the old value and enable RSC if necessary */
need_reset = ixgbe_update_rsc(adapter, ec);
/* check the old value and enable RSC if necessary */
need_reset = ixgbe_update_rsc(adapter, ec);
/* 1 means dynamic mode */
adapter->rx_eitr_param = 20000;
adapter->rx_itr_setting = 1;
} else {
/* check the old value and enable RSC if necessary */
need_reset = ixgbe_update_rsc(adapter, ec);
/*
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
adapter->rx_itr_setting = 0;
}
if (ec->rx_coalesce_usecs > 1)
adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
else
adapter->rx_itr_setting = ec->rx_coalesce_usecs;
if (ec->tx_coalesce_usecs > 1) {
/*
* don't have to worry about max_int as above because
* tx vectors don't do hardware RSC (an rx function)
*/
/* check the limits */
if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
(1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
return -EINVAL;
if (adapter->rx_itr_setting == 1)
rx_itr_param = IXGBE_20K_ITR;
else
rx_itr_param = adapter->rx_itr_setting;
/* store the value in ints/second */
adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
if (ec->tx_coalesce_usecs > 1)
adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
else
adapter->tx_itr_setting = ec->tx_coalesce_usecs;
/* static value of interrupt rate */
adapter->tx_itr_setting = adapter->tx_eitr_param;
if (adapter->tx_itr_setting == 1)
tx_itr_param = IXGBE_10K_ITR;
else
tx_itr_param = adapter->tx_itr_setting;
/* clear the lower bit as its used for dynamic state */
adapter->tx_itr_setting &= ~1;
} else if (ec->tx_coalesce_usecs == 1) {
/* 1 means dynamic mode */
adapter->tx_eitr_param = 10000;
adapter->tx_itr_setting = 1;
} else {
adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
adapter->tx_itr_setting = 0;
}
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
else
num_vectors = 1;
/* MSI/MSIx Interrupt Mode */
if (adapter->flags &
(IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) {
int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
for (i = 0; i < num_vectors; i++) {
q_vector = adapter->q_vector[i];
if (q_vector->tx.count && !q_vector->rx.count)
/* tx only */
q_vector->eitr = adapter->tx_eitr_param;
else
/* rx only or mixed */
q_vector->eitr = adapter->rx_eitr_param;
q_vector->tx.work_limit = adapter->tx_work_limit;
ixgbe_write_eitr(q_vector);
}
/* Legacy Interrupt Mode */
} else {
q_vector = adapter->q_vector[0];
q_vector->eitr = adapter->rx_eitr_param;
for (i = 0; i < num_vectors; i++) {
q_vector = adapter->q_vector[i];
q_vector->tx.work_limit = adapter->tx_work_limit;
if (q_vector->tx.count && !q_vector->rx.count)
/* tx only */
q_vector->itr = tx_itr_param;
else
/* rx only or mixed */
q_vector->itr = rx_itr_param;
ixgbe_write_eitr(q_vector);
}
......
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
View file @ 3869f806
......@@ -661,9 +661,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
IXGBE_ETQS_QUEUE_EN |
(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
IXGBE_FCRXCTRL_FCOELLI |
IXGBE_FCRXCTRL_FCCRCBO |
IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, IXGBE_FCRXCTRL_FCCRCBO |
(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
return;
......
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
View file @ 3869f806
......@@ -1500,12 +1500,19 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next)
ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx);
if (q_vector->tx.ring && !q_vector->rx.ring)
/* tx only */
q_vector->eitr = adapter->tx_eitr_param;
else if (q_vector->rx.ring)
/* rx or mixed */
q_vector->eitr = adapter->rx_eitr_param;
if (q_vector->tx.ring && !q_vector->rx.ring) {
/* tx only vector */
if (adapter->tx_itr_setting == 1)
q_vector->itr = IXGBE_10K_ITR;
else
q_vector->itr = adapter->tx_itr_setting;
} else {
/* rx or rx/tx vector */
if (adapter->rx_itr_setting == 1)
q_vector->itr = IXGBE_20K_ITR;
else
q_vector->itr = adapter->rx_itr_setting;
}
ixgbe_write_eitr(q_vector);
}
......@@ -1519,7 +1526,6 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
case ixgbe_mac_X540:
ixgbe_set_ivar(adapter, -1, 1, v_idx);
break;
default:
break;
}
......@@ -1527,12 +1533,10 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
/* set up to autoclear timer, and the vectors */
mask = IXGBE_EIMS_ENABLE_MASK;
if (adapter->num_vfs)
mask &= ~(IXGBE_EIMS_OTHER |
IXGBE_EIMS_MAILBOX |
IXGBE_EIMS_LSC);
else
mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
mask &= ~(IXGBE_EIMS_OTHER |
IXGBE_EIMS_MAILBOX |
IXGBE_EIMS_LSC);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
}
......@@ -1577,7 +1581,7 @@ static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector,
* 100-1249MB/s bulk (8000 ints/s)
*/
/* what was last interrupt timeslice? */
timepassed_us = 1000000/q_vector->eitr;
timepassed_us = q_vector->itr >> 2;
bytes_perint = bytes / timepassed_us; /* bytes/usec */
switch (itr_setting) {
......@@ -1618,7 +1622,7 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
struct ixgbe_adapter *adapter = q_vector->adapter;
struct ixgbe_hw *hw = &adapter->hw;
int v_idx = q_vector->v_idx;
u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
u32 itr_reg = q_vector->itr;
switch (adapter->hw.mac.type) {
case ixgbe_mac_82598EB:
......@@ -1627,15 +1631,6 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
break;
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
/*
* 82599 and X540 can support a value of zero, so allow it for
* max interrupt rate, but there is an errata where it can
* not be zero with RSC
*/
if (itr_reg == 8 &&
!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))
itr_reg = 0;
/*
* set the WDIS bit to not clear the timer bits and cause an
* immediate assertion of the interrupt
......@@ -1650,7 +1645,7 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector)
{
u32 new_itr = q_vector->eitr;
u32 new_itr = q_vector->itr;
u8 current_itr;
ixgbe_update_itr(q_vector, &q_vector->tx);
......@@ -1661,24 +1656,25 @@ static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector)
switch (current_itr) {
/* counts and packets in update_itr are dependent on these numbers */
case lowest_latency:
new_itr = 100000;
new_itr = IXGBE_100K_ITR;
break;
case low_latency:
new_itr = 20000; /* aka hwitr = ~200 */
new_itr = IXGBE_20K_ITR;
break;
case bulk_latency:
new_itr = 8000;
new_itr = IXGBE_8K_ITR;
break;
default:
break;
}
if (new_itr != q_vector->eitr) {
if (new_itr != q_vector->itr) {
/* do an exponential smoothing */
new_itr = ((q_vector->eitr * 9) + new_itr)/10;
new_itr = (10 * new_itr * q_vector->itr) /
((9 * new_itr) + q_vector->itr);
/* save the algorithm value here */
q_vector->eitr = new_itr;
q_vector->itr = new_itr & IXGBE_MAX_EITR;
ixgbe_write_eitr(q_vector);
}
......@@ -1755,6 +1751,39 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
}
}
static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr)
{
if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE))
return;
switch (adapter->hw.mac.type) {
case ixgbe_mac_82599EB:
/*
* Need to check link state so complete overtemp check
* on service task
*/
if (((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)) &&
(!test_bit(__IXGBE_DOWN, &adapter->state))) {
adapter->interrupt_event = eicr;
adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
ixgbe_service_event_schedule(adapter);
return;
}
return;
case ixgbe_mac_X540:
if (!(eicr & IXGBE_EICR_TS))
return;
break;
default:
return;
}
e_crit(drv,
"Network adapter has been stopped because it has over heated. "
"Restart the computer. If the problem persists, "
"power off the system and replace the adapter\n");
}
static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
{
struct ixgbe_hw *hw = &adapter->hw;
......@@ -1858,7 +1887,16 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
mask &= ~IXGBE_EIMS_LSC;
if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
mask |= IXGBE_EIMS_GPI_SDP0;
switch (adapter->hw.mac.type) {
case ixgbe_mac_82599EB:
mask |= IXGBE_EIMS_GPI_SDP0;
break;
case ixgbe_mac_X540:
mask |= IXGBE_EIMS_TS;
break;
default:
break;
}
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
mask |= IXGBE_EIMS_GPI_SDP1;
switch (adapter->hw.mac.type) {
......@@ -1928,14 +1966,7 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
}
}
ixgbe_check_sfp_event(adapter, eicr);
if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
adapter->interrupt_event = eicr;
adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
ixgbe_service_event_schedule(adapter);
}
}
ixgbe_check_overtemp_event(adapter, eicr);
break;
default:
break;
......@@ -2145,14 +2176,12 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
switch (hw->mac.type) {
case ixgbe_mac_82599EB:
ixgbe_check_sfp_event(adapter, eicr);
if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
adapter->interrupt_event = eicr;
adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
ixgbe_service_event_schedule(adapter);
}
}
/* Fall through */
case ixgbe_mac_X540:
if (eicr & IXGBE_EICR_ECC)
e_info(link, "Received unrecoverable ECC err, please "
"reboot\n");
ixgbe_check_overtemp_event(adapter, eicr);
break;
default:
break;
......@@ -2301,10 +2330,15 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
**/
static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
/* rx/tx vector */
if (adapter->rx_itr_setting == 1)
q_vector->itr = IXGBE_20K_ITR;
else
q_vector->itr = adapter->rx_itr_setting;
IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
ixgbe_write_eitr(q_vector);
ixgbe_set_ivar(adapter, 0, 0, 0);
ixgbe_set_ivar(adapter, 1, 0, 0);
......@@ -3350,8 +3384,127 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_RQTC, reg);
}
}
#endif
/* Additional bittime to account for IXGBE framing */
#define IXGBE_ETH_FRAMING 20
/*
* ixgbe_hpbthresh - calculate high water mark for flow control
*
* @adapter: board private structure to calculate for
* @pb - packet buffer to calculate
*/
static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb)
{
struct ixgbe_hw *hw = &adapter->hw;
struct net_device *dev = adapter->netdev;
int link, tc, kb, marker;
u32 dv_id, rx_pba;
/* Calculate max LAN frame size */
tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING;
#ifdef IXGBE_FCOE
/* FCoE traffic class uses FCOE jumbo frames */
if (dev->features & NETIF_F_FCOE_MTU) {
int fcoe_pb = 0;
#ifdef CONFIG_IXGBE_DCB
fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up);
#endif
if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE)
tc = IXGBE_FCOE_JUMBO_FRAME_SIZE;
}
#endif
/* Calculate delay value for device */
switch (hw->mac.type) {
case ixgbe_mac_X540:
dv_id = IXGBE_DV_X540(link, tc);
break;
default:
dv_id = IXGBE_DV(link, tc);
break;
}
/* Loopback switch introduces additional latency */
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
dv_id += IXGBE_B2BT(tc);
/* Delay value is calculated in bit times convert to KB */
kb = IXGBE_BT2KB(dv_id);
rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10;
marker = rx_pba - kb;
/* It is possible that the packet buffer is not large enough
* to provide required headroom. In this case throw an error
* to user and a do the best we can.
*/
if (marker < 0) {
e_warn(drv, "Packet Buffer(%i) can not provide enough"
"headroom to support flow control."
"Decrease MTU or number of traffic classes\n", pb);
marker = tc + 1;
}
return marker;
}
/*
* ixgbe_lpbthresh - calculate low water mark for for flow control
*
* @adapter: board private structure to calculate for
* @pb - packet buffer to calculate
*/
static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct net_device *dev = adapter->netdev;
int tc;
u32 dv_id;
/* Calculate max LAN frame size */
tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
/* Calculate delay value for device */
switch (hw->mac.type) {
case ixgbe_mac_X540:
dv_id = IXGBE_LOW_DV_X540(tc);
break;
default:
dv_id = IXGBE_LOW_DV(tc);
break;
}
/* Delay value is calculated in bit times convert to KB */
return IXGBE_BT2KB(dv_id);
}
/*
* ixgbe_pbthresh_setup - calculate and setup high low water marks
*/
static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
int num_tc = netdev_get_num_tc(adapter->netdev);
int i;
if (!num_tc)
num_tc = 1;
hw->fc.low_water = ixgbe_lpbthresh(adapter);
for (i = 0; i < num_tc; i++) {
hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i);
/* Low water marks must not be larger than high water marks */
if (hw->fc.low_water > hw->fc.high_water[i])
hw->fc.low_water = 0;
}
}
static void ixgbe_configure_pb(struct ixgbe_adapter *adapter)
{
......@@ -3366,6 +3519,7 @@ static void ixgbe_configure_pb(struct ixgbe_adapter *adapter)
hdrm = 0;
hw->mac.ops.set_rxpba(hw, tc, hdrm, PBA_STRATEGY_EQUAL);
ixgbe_pbthresh_setup(adapter);
}
static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
......@@ -3530,8 +3684,18 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
}
/* Enable Thermal over heat sensor interrupt */
if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
gpie |= IXGBE_SDP0_GPIEN;
if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) {
switch (adapter->hw.mac.type) {
case ixgbe_mac_82599EB:
gpie |= IXGBE_SDP0_GPIEN;
break;
case ixgbe_mac_X540:
gpie |= IXGBE_EIMS_TS;
break;
default:
break;
}
}
/* Enable fan failure interrupt */
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
......@@ -4613,12 +4777,6 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
if (!alloc_cpumask_var(&q_vector->affinity_mask, GFP_KERNEL))
goto err_out;
cpumask_set_cpu(v_idx, q_vector->affinity_mask);
if (q_vector->tx.count && !q_vector->rx.count)
q_vector->eitr = adapter->tx_eitr_param;
else
q_vector->eitr = adapter->rx_eitr_param;
netif_napi_add(adapter->netdev, &q_vector->napi,
ixgbe_poll, 64);
adapter->q_vector[v_idx] = q_vector;
......@@ -4774,13 +4932,11 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
struct net_device *dev = adapter->netdev;
unsigned int rss;
#ifdef CONFIG_IXGBE_DCB
int j;
struct tc_configuration *tc;
#endif
int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
/* PCI config space info */
......@@ -4800,8 +4956,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
break;
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
case ixgbe_mac_82599EB:
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
......@@ -4856,17 +5013,14 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
#ifdef CONFIG_DCB
adapter->last_lfc_mode = hw->fc.current_mode;
#endif
hw->fc.high_water = FC_HIGH_WATER(max_frame);
hw->fc.low_water = FC_LOW_WATER(max_frame);
ixgbe_pbthresh_setup(adapter);
hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
hw->fc.send_xon = true;
hw->fc.disable_fc_autoneg = false;
/* enable itr by default in dynamic mode */
adapter->rx_itr_setting = 1;
adapter->rx_eitr_param = 20000;
adapter->tx_itr_setting = 1;
adapter->tx_eitr_param = 10000;
/* set defaults for eitr in MegaBytes */
adapter->eitr_low = 10;
......@@ -5126,9 +5280,6 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
/* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
hw->fc.high_water = FC_HIGH_WATER(max_frame);
hw->fc.low_water = FC_LOW_WATER(max_frame);
if (netif_running(netdev))
ixgbe_reinit_locked(adapter);
......
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
View file @ 3869f806
......@@ -404,6 +404,7 @@
#define IXGBE_WUPL_LENGTH_MASK 0xFFFF
/* DCB registers */
#define MAX_TRAFFIC_CLASS 8
#define IXGBE_RMCS 0x03D00
#define IXGBE_DPMCS 0x07F40
#define IXGBE_PDPMCS 0x0CD00
......@@ -1279,6 +1280,7 @@ enum {
#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */
#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
#define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */
#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */
#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */
......@@ -1313,6 +1315,7 @@ enum {
#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermel Sensor Event */
#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
......@@ -2323,13 +2326,60 @@ typedef u32 ixgbe_physical_layer;
#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
/* Flow Control Macros */
#define PAUSE_RTT 8
#define PAUSE_MTU(MTU) ((MTU + 1024 - 1) / 1024)
/* Flow Control Data Sheet defined values
* Calculation and defines taken from 802.1bb Annex O
*/
/* BitTimes (BT) conversion */
#define IXGBE_BT2KB(BT) ((BT + 1023) / (8 * 1024))
#define IXGBE_B2BT(BT) (BT * 8)
/* Calculate Delay to respond to PFC */
#define IXGBE_PFC_D 672
/* Calculate Cable Delay */
#define IXGBE_CABLE_DC 5556 /* Delay Copper */
#define IXGBE_CABLE_DO 5000 /* Delay Optical */
/* Calculate Interface Delay X540 */
#define IXGBE_PHY_DC 25600 /* Delay 10G BASET */
#define IXGBE_MAC_DC 8192 /* Delay Copper XAUI interface */
#define IXGBE_XAUI_DC (2 * 2048) /* Delay Copper Phy */
#define IXGBE_ID_X540 (IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC)
/* Calculate Interface Delay 82598, 82599 */
#define IXGBE_PHY_D 12800
#define IXGBE_MAC_D 4096
#define IXGBE_XAUI_D (2 * 1024)
#define IXGBE_ID (IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D)
/* Calculate Delay incurred from higher layer */
#define IXGBE_HD 6144
/* Calculate PCI Bus delay for low thresholds */
#define IXGBE_PCI_DELAY 10000
/* Calculate X540 delay value in bit times */
#define IXGBE_FILL_RATE (36 / 25)
#define IXGBE_DV_X540(LINK, TC) (IXGBE_FILL_RATE * \
(IXGBE_B2BT(LINK) + IXGBE_PFC_D + \
(2 * IXGBE_CABLE_DC) + \
(2 * IXGBE_ID_X540) + \
IXGBE_HD + IXGBE_B2BT(TC)))
/* Calculate 82599, 82598 delay value in bit times */
#define IXGBE_DV(LINK, TC) (IXGBE_FILL_RATE * \
(IXGBE_B2BT(LINK) + IXGBE_PFC_D + \
(2 * IXGBE_CABLE_DC) + (2 * IXGBE_ID) + \
IXGBE_HD + IXGBE_B2BT(TC)))
#define FC_HIGH_WATER(MTU) ((((PAUSE_RTT + PAUSE_MTU(MTU)) * 144) + 99) / 100 +\
PAUSE_MTU(MTU))
#define FC_LOW_WATER(MTU) (2 * (2 * PAUSE_MTU(MTU) + PAUSE_RTT))
/* Calculate low threshold delay values */
#define IXGBE_LOW_DV_X540(TC) (2 * IXGBE_B2BT(TC) + \
(IXGBE_FILL_RATE * IXGBE_PCI_DELAY))
#define IXGBE_LOW_DV(TC) (2 * IXGBE_LOW_DV_X540(TC))
/* Software ATR hash keys */
#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2
......@@ -2548,7 +2598,7 @@ struct ixgbe_bus_info {
/* Flow control parameters */
struct ixgbe_fc_info {
u32 high_water; /* Flow Control High-water */
u32 high_water[MAX_TRAFFIC_CLASS]; /* Flow Control High-water */
u32 low_water; /* Flow Control Low-water */
u16 pause_time; /* Flow Control Pause timer */
bool send_xon; /* Flow control send XON */
......
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
View file @ 3869f806
......@@ -293,12 +293,10 @@ static void ixgbevf_receive_skb(struct ixgbevf_q_vector *q_vector,
{
struct ixgbevf_adapter *adapter = q_vector->adapter;
bool is_vlan = (status & IXGBE_RXD_STAT_VP);
u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
if (is_vlan) {
u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
if (is_vlan && test_bit(tag, adapter->active_vlans))
__vlan_hwaccel_put_tag(skb, tag);
}
if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
napi_gro_receive(&q_vector->napi, skb);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7