ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board

Based on an i.MX6 Solo with 512MB DDR3.

http://boundarydevices.com/product/nitrogen6_lite/Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/Makefile

@@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
 	imx6dl-rex-basic.dtb \

arch/arm/boot/dts/imx6dl-nit6xlite.dts

+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};

arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi

+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	bt_rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_rfkill>;
+		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		name = "bt_rfkill";
+		type = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight_lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel_lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	imx6dl-nit6xlite {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_bt_rfkill: bt_rfkillgrp {
+			fsl,pins = <
+				/* BT wake */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* BT reset */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0b0b0
+				/* BT reg en */
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+				/* BT host wake irq */
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Home Button: J14 pin 5 */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Back Button: J14 pin 7 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				/* Touch IRQ: J7 pin 4 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+				/* tcs2004 IRQ */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+				/* tsc2004 reset */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+			>;
+		};
+
+		pinctrl_j10: j10grp {
+			fsl,pins = <
+				/* Broadcom WiFi module pins */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+
+		pinctrl_j28: j28grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+			>;
+		};
+
+		pinctrl_rtc: rtcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	vqmmc-1-8-v;
+	ocr-limit = <0x180>;     /* 1.65v - 2.1v */
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};