drm/i915: Include register polling in reg_rw traces

We generally omit register polling from the i915_reg_rw tracepoint.
Understandable since polling could generate a lot of noise in the
trace. The downside is that the trace is incomplete. As a compromise
let's trace the final register value observed while polling. That
should be generally sufficient to observe what the code should be
doing next.

I suppose in some cases it might make sense to also trace the initial
register value, and maybe the number of times we polled. But that
would require a separate tracepoint so let's leave it for the future.

The other users of _NOTRACE() are i915_pmu and i2c bitbanging,
which I decided to leave alone.

Next we should do something to claw back the tracepoints for
planes and whatnot which were switched to _FW() a while back.
I guess just new macros for raw_rw+trace. The question is
what to call it?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204211644.21967-1-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drivers/gpu/drm/i915/i915_drv.c

@@ -2543,6 +2543,10 @@ static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv)
 static int vlv_wait_for_pw_status(struct drm_i915_private *dev_priv,
 				  u32 mask, u32 val)
 {
+	i915_reg_t reg = VLV_GTLC_PW_STATUS;
+	u32 reg_value;
+	int ret;
+
 	/* The HW does not like us polling for PW_STATUS frequently, so
 	 * use the sleeping loop rather than risk the busy spin within
 	 * intel_wait_for_register().
@@ -2550,8 +2554,12 @@ static int vlv_wait_for_pw_status(struct drm_i915_private *dev_priv,
 	 * Transitioning between RC6 states should be at most 2ms (see
 	 * valleyview_enable_rps) so use a 3ms timeout.
 	 */
-	return wait_for((I915_READ_NOTRACE(VLV_GTLC_PW_STATUS) & mask) == val,
-			3);
+	ret = wait_for(((reg_value = I915_READ_NOTRACE(reg)) & mask) == val, 3);
+
+	/* just trace the final value */
+	trace_i915_reg_rw(false, reg, reg_value, sizeof(reg_value), true);
+
+	return ret;
 }
 
 int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on)

drivers/gpu/drm/i915/intel_dp.c

@@ -1061,6 +1061,10 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp)
 #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 	done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
 				  msecs_to_jiffies_timeout(10));
+
+	/* just trace the final value */
+	trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
+
 	if (!done)
 		DRM_ERROR("dp aux hw did not signal timeout!\n");
 #undef C
@@ -1227,6 +1231,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
 			break;
 		msleep(1);
 	}
+	/* just trace the final value */
+	trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
 
 	if (try == 3) {
 		static u32 last_status = -1;

drivers/gpu/drm/i915/intel_uncore.c

@@ -1819,6 +1819,9 @@ int __intel_wait_for_register(struct drm_i915_private *dev_priv,
 				 (reg_value & mask) == value,
 				 slow_timeout_ms * 1000, 10, 1000);
 
+	/* just trace the final value */
+	trace_i915_reg_rw(false, reg, reg_value, sizeof(reg_value), true);
+
 	if (out_value)
 		*out_value = reg_value;