Merge tag 'soundwire-5.13-rc1' of...

Merge tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.13-rc1

Updates for v5.13-rc1 are:

Core:
 - Ability to add quirks for masters
 - static checker cleanup for bus code

Drivers:
 - DMI quirks for Intel controllers
 - static checker cleanup for drivers
 - add auto enumeration support qcom controller

* tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits)
  soundwire: intel_init: test link->cdns
  soundwire: qcom: handle return correctly in qcom_swrm_transport_params
  soundwire: qcom: cleanup internal port config indexing
  soundwire: qcom: wait for fifo space to be available before read/write
  soundwire: qcom: add static port map support
  soundwire: qcom: update port map allocation bit mask
  soundwire: add static port mapping support
  soundwire: stream: fix memory leak in stream config error path
  soundwire: qcom: use signed variable for error return
  soundwire: qcom: wait for enumeration to be complete in probe
  soundwire: qcom: add auto enumeration support
  soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add
  soundwire: qcom: add support to new interrupts
  soundwire: qcom: update register read/write routine
  soundwire: qcom: start the clock during initialization
  soundwire: qcom: set continue execution flag for ignored commands
  soundwire: qcom: add support to missing transport params
  dt-bindings: soundwire: qcom: clarify data port bus parameters
  soundwire: cadence: only prepare attached devices on clock stop
  soundwire: generic_allocation: fix confusion between group and packing
  ...

Documentation/devicetree/bindings/soundwire/qcom,sdw.txt

@@ -54,6 +54,8 @@ board specific bus parameters.
 	Value type: <prop-encoded-array>
 	Definition: should specify payload transport window offset1 of each
 		    data port. Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-offset2:
@@ -61,6 +63,8 @@ board specific bus parameters.
 	Value type: <prop-encoded-array>
 	Definition: should specify payload transport window offset2 of each
 		    data port. Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-sinterval-low:
@@ -69,12 +73,16 @@ board specific bus parameters.
 	Definition: should be sample interval low of each data port.
 		    Out ports followed by In ports. Used for Sample Interval
 		    calculation.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-word-length:
 	Usage: optional
 	Value type: <prop-encoded-array>
 	Definition: should be size of payload channel sample.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-block-pack-mode:
@@ -84,6 +92,8 @@ board specific bus parameters.
 		    0 to indicate Blocks are per Channel
 		    1 to indicate Blocks are per Port.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-block-group-count:
@@ -92,6 +102,8 @@ board specific bus parameters.
 	Definition: should be in range 1 to 4 to indicate how many sample
 		    intervals are combined into a payload.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-lane-control:
@@ -100,6 +112,8 @@ board specific bus parameters.
 	Definition: should be in range 0 to 7 to identify which	data lane
 		    the data port uses.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-hstart:
@@ -109,6 +123,8 @@ board specific bus parameters.
 		    SoundWire Frame, i.e. left edge of the Transport sub-frame
 		    for each port. Values between 0 and 15 are valid.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,ports-hstop:
@@ -118,6 +134,8 @@ board specific bus parameters.
 		    SoundWire Frame, i.e. the right edge of the Transport
 		    sub-frame for each port. Values between 0 and 15 are valid.
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 - qcom,dports-type:
@@ -128,6 +146,8 @@ board specific bus parameters.
 		    1 for simple ports
 		    2 for full port
 		    Out ports followed by In ports.
+		    Value of 0xFF indicates that this option is not implemented
+		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
 Note:

drivers/soundwire/Makefile

@@ -20,7 +20,7 @@ soundwire-cadence-y := cadence_master.o
 obj-$(CONFIG_SOUNDWIRE_CADENCE) += soundwire-cadence.o
 
 #Intel driver
-soundwire-intel-y :=	intel.o intel_init.o
+soundwire-intel-y :=	intel.o intel_init.o dmi-quirks.o
 obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o
 
 #Qualcomm driver

drivers/soundwire/bus.c

@@ -44,13 +44,13 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	}
 
 	ret = sdw_get_id(bus);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(parent, "Failed to get bus id\n");
 		return ret;
 	}
 
 	ret = sdw_master_device_add(bus, parent, fwnode);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(parent, "Failed to add master device at link %d\n",
 			bus->link_id);
 		return ret;
@@ -121,7 +121,7 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	else
 		ret = -ENOTSUPP; /* No ACPI/DT so error out */
 
-	if (ret) {
+	if (ret < 0) {
 		dev_err(bus->dev, "Finding slaves failed:%d\n", ret);
 		return ret;
 	}
@@ -422,7 +422,7 @@ sdw_bread_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_READ, &buf);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ret = sdw_transfer(bus, &msg);
@@ -440,7 +440,7 @@ sdw_bwrite_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_WRITE, &value);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return sdw_transfer(bus, &msg);
@@ -454,7 +454,7 @@ int sdw_bread_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_READ, &buf);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ret = sdw_transfer_unlocked(bus, &msg);
@@ -472,7 +472,7 @@ int sdw_bwrite_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 val
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_WRITE, &value);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return sdw_transfer_unlocked(bus, &msg);
@@ -593,7 +593,7 @@ EXPORT_SYMBOL(sdw_write);
 /* called with bus_lock held */
 static struct sdw_slave *sdw_get_slave(struct sdw_bus *bus, int i)
 {
-	struct sdw_slave *slave = NULL;
+	struct sdw_slave *slave;
 
 	list_for_each_entry(slave, &bus->slaves, node) {
 		if (slave->dev_num == i)
@@ -603,7 +603,7 @@ static struct sdw_slave *sdw_get_slave(struct sdw_bus *bus, int i)
 	return NULL;
 }
 
-static int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id)
+int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id)
 {
 	if (slave->id.mfg_id != id.mfg_id ||
 	    slave->id.part_id != id.part_id ||
@@ -614,6 +614,7 @@ static int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id)
 
 	return 0;
 }
+EXPORT_SYMBOL(sdw_compare_devid);
 
 /* called with bus_lock held */
 static int sdw_get_device_num(struct sdw_slave *slave)
@@ -698,6 +699,7 @@ void sdw_extract_slave_id(struct sdw_bus *bus,
 		"SDW Slave class_id 0x%02x, mfg_id 0x%04x, part_id 0x%04x, unique_id 0x%x, version 0x%x\n",
 		id->class_id, id->mfg_id, id->part_id, id->unique_id, id->sdw_version);
 }
+EXPORT_SYMBOL(sdw_extract_slave_id);
 
 static int sdw_program_device_num(struct sdw_bus *bus)
 {
@@ -705,7 +707,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
 	struct sdw_slave *slave, *_s;
 	struct sdw_slave_id id;
 	struct sdw_msg msg;
-	bool found = false;
+	bool found;
 	int count = 0, ret;
 	u64 addr;
 
@@ -737,6 +739,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
 
 		sdw_extract_slave_id(bus, addr, &id);
 
+		found = false;
 		/* Now compare with entries */
 		list_for_each_entry_safe(slave, _s, &bus->slaves, node) {
 			if (sdw_compare_devid(slave, id) == 0) {
@@ -749,7 +752,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
 				 * dev_num
 				 */
 				ret = sdw_assign_device_num(slave);
-				if (ret) {
+				if (ret < 0) {
 					dev_err(bus->dev,
 						"Assign dev_num failed:%d\n",
 						ret);
@@ -875,14 +878,18 @@ static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave,
 		if (wake_en)
 			val |= SDW_SCP_SYSTEMCTRL_WAKE_UP_EN;
 	} else {
-		val = sdw_read_no_pm(slave, SDW_SCP_SYSTEMCTRL);
-
+		ret = sdw_read_no_pm(slave, SDW_SCP_SYSTEMCTRL);
+		if (ret < 0) {
+			dev_err(&slave->dev, "SDW_SCP_SYSTEMCTRL read failed:%d\n", ret);
+			return ret;
+		}
+		val = ret;
 		val &= ~(SDW_SCP_SYSTEMCTRL_CLK_STP_PREP);
 	}
 
 	ret = sdw_write_no_pm(slave, SDW_SCP_SYSTEMCTRL, val);
 
-	if (ret != 0)
+	if (ret < 0)
 		dev_err(&slave->dev,
 			"Clock Stop prepare failed for slave: %d", ret);
 
@@ -895,10 +902,14 @@ static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num)
 	int val;
 
 	do {
-		val = sdw_bread_no_pm(bus, dev_num, SDW_SCP_STAT) &
-			SDW_SCP_STAT_CLK_STP_NF;
+		val = sdw_bread_no_pm(bus, dev_num, SDW_SCP_STAT);
+		if (val < 0) {
+			dev_err(bus->dev, "SDW_SCP_STAT bread failed:%d\n", val);
+			return val;
+		}
+		val &= SDW_SCP_STAT_CLK_STP_NF;
 		if (!val) {
-			dev_info(bus->dev, "clock stop prep/de-prep done slave:%d",
+			dev_dbg(bus->dev, "clock stop prep/de-prep done slave:%d",
 				dev_num);
 			return 0;
 		}
@@ -1253,6 +1264,7 @@ static int sdw_slave_set_frequency(struct sdw_slave *slave)
 static int sdw_initialize_slave(struct sdw_slave *slave)
 {
 	struct sdw_slave_prop *prop = &slave->prop;
+	int status;
 	int ret;
 	u8 val;
 
@@ -1260,6 +1272,44 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
 	if (ret < 0)
 		return ret;
 
+	if (slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH) {
+		/* Clear bus clash interrupt before enabling interrupt mask */
+		status = sdw_read_no_pm(slave, SDW_SCP_INT1);
+		if (status < 0) {
+			dev_err(&slave->dev,
+				"SDW_SCP_INT1 (BUS_CLASH) read failed:%d\n", status);
+			return status;
+		}
+		if (status & SDW_SCP_INT1_BUS_CLASH) {
+			dev_warn(&slave->dev, "Bus clash detected before INT mask is enabled\n");
+			ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_BUS_CLASH);
+			if (ret < 0) {
+				dev_err(&slave->dev,
+					"SDW_SCP_INT1 (BUS_CLASH) write failed:%d\n", ret);
+				return ret;
+			}
+		}
+	}
+	if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) &&
+	    !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) {
+		/* Clear parity interrupt before enabling interrupt mask */
+		status = sdw_read_no_pm(slave, SDW_SCP_INT1);
+		if (status < 0) {
+			dev_err(&slave->dev,
+				"SDW_SCP_INT1 (PARITY) read failed:%d\n", status);
+			return status;
+		}
+		if (status & SDW_SCP_INT1_PARITY) {
+			dev_warn(&slave->dev, "PARITY error detected before INT mask is enabled\n");
+			ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_PARITY);
+			if (ret < 0) {
+				dev_err(&slave->dev,
+					"SDW_SCP_INT1 (PARITY) write failed:%d\n", ret);
+				return ret;
+			}
+		}
+	}
+
 	/*
 	 * Set SCP_INT1_MASK register, typically bus clash and
 	 * implementation-defined interrupt mask. The Parity detection
@@ -1589,7 +1639,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 		ret = sdw_read_no_pm(slave, SDW_SCP_INT1);
 		if (ret < 0) {
 			dev_err(&slave->dev,
-				"SDW_SCP_INT1 read failed:%d\n", ret);
+				"SDW_SCP_INT1 recheck read failed:%d\n", ret);
 			goto io_err;
 		}
 		_buf = ret;
@@ -1597,7 +1647,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 		ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, _buf2);
 		if (ret < 0) {
 			dev_err(&slave->dev,
-				"SDW_SCP_INT2/3 read failed:%d\n", ret);
+				"SDW_SCP_INT2/3 recheck read failed:%d\n", ret);
 			goto io_err;
 		}
 
@@ -1605,7 +1655,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 			ret = sdw_read_no_pm(slave, SDW_DP0_INT);
 			if (ret < 0) {
 				dev_err(&slave->dev,
-					"SDW_DP0_INT read failed:%d\n", ret);
+					"SDW_DP0_INT recheck read failed:%d\n", ret);
 				goto io_err;
 			}
 			sdca_cascade = ret & SDW_DP0_SDCA_CASCADE;
@@ -1701,7 +1751,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 	if (status[0] == SDW_SLAVE_ATTACHED) {
 		dev_dbg(bus->dev, "Slave attached, programming device number\n");
 		ret = sdw_program_device_num(bus);
-		if (ret)
+		if (ret < 0)
 			dev_err(bus->dev, "Slave attach failed: %d\n", ret);
 		/*
 		 * programming a device number will have side effects,
@@ -1735,7 +1785,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 
 		case SDW_SLAVE_ALERT:
 			ret = sdw_handle_slave_alerts(slave);
-			if (ret)
+			if (ret < 0)
 				dev_err(&slave->dev,
 					"Slave %d alert handling failed: %d\n",
 					i, ret);
@@ -1754,7 +1804,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 			attached_initializing = true;
 
 			ret = sdw_initialize_slave(slave);
-			if (ret)
+			if (ret < 0)
 				dev_err(&slave->dev,
 					"Slave %d initialization failed: %d\n",
 					i, ret);
@@ -1768,7 +1818,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 		}
 
 		ret = sdw_update_slave_status(slave, status[i]);
-		if (ret)
+		if (ret < 0)
 			dev_err(&slave->dev,
 				"Update Slave status failed:%d\n", ret);
 		if (attached_initializing) {

drivers/soundwire/bus.h

@@ -7,6 +7,8 @@
 #define DEFAULT_BANK_SWITCH_TIMEOUT 3000
 #define DEFAULT_PROBE_TIMEOUT       2000
 
+u64 sdw_dmi_override_adr(struct sdw_bus *bus, u64 addr);
+
 #if IS_ENABLED(CONFIG_ACPI)
 int sdw_acpi_find_slaves(struct sdw_bus *bus);
 #else

drivers/soundwire/bus_type.c

@@ -82,6 +82,7 @@ static int sdw_drv_probe(struct device *dev)
 	struct sdw_slave *slave = dev_to_sdw_dev(dev);
 	struct sdw_driver *drv = drv_to_sdw_driver(dev->driver);
 	const struct sdw_device_id *id;
+	const char *name;
 	int ret;
 
 	/*
@@ -108,7 +109,10 @@ static int sdw_drv_probe(struct device *dev)
 
 	ret = drv->probe(slave, id);
 	if (ret) {
-		dev_err(dev, "Probe of %s failed: %d\n", drv->name, ret);
+		name = drv->name;
+		if (!name)
+			name = drv->driver.name;
+		dev_err(dev, "Probe of %s failed: %d\n", name, ret);
 		dev_pm_domain_detach(dev, false);
 		return ret;
 	}
@@ -174,11 +178,16 @@ static void sdw_drv_shutdown(struct device *dev)
  */
 int __sdw_register_driver(struct sdw_driver *drv, struct module *owner)
 {
+	const char *name;
+
 	drv->driver.bus = &sdw_bus_type;
 
 	if (!drv->probe) {
-		pr_err("driver %s didn't provide SDW probe routine\n",
-		       drv->name);
+		name = drv->name;
+		if (!name)
+			name = drv->driver.name;
+
+		pr_err("driver %s didn't provide SDW probe routine\n", name);
 		return -EINVAL;
 	}
 

drivers/soundwire/cadence_master.c

@@ -905,7 +905,7 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id)
 EXPORT_SYMBOL(sdw_cdns_irq);
 
 /**
- * To update slave status in a work since we will need to handle
+ * cdns_update_slave_status_work - update slave status in a work since we will need to handle
  * other interrupts eg. CDNS_MCP_INT_RX_WL during the update slave
  * process.
  * @work: cdns worker thread
@@ -968,7 +968,7 @@ int sdw_cdns_exit_reset(struct sdw_cdns *cdns)
 EXPORT_SYMBOL(sdw_cdns_exit_reset);
 
 /**
- * sdw_cdns_enable_slave_interrupt() - Enable SDW slave interrupts
+ * cdns_enable_slave_interrupts() - Enable SDW slave interrupts
  * @cdns: Cadence instance
  * @state: boolean for true/false
  */
@@ -1450,11 +1450,13 @@ int sdw_cdns_clock_stop(struct sdw_cdns *cdns, bool block_wake)
 	}
 
 	/* Prepare slaves for clock stop */
+	if (slave_present) {
 		ret = sdw_bus_prep_clk_stop(&cdns->bus);
-	if (ret < 0) {
-		dev_err(cdns->dev, "prepare clock stop failed %d", ret);
+		if (ret < 0 && ret != -ENODATA) {
+			dev_err(cdns->dev, "prepare clock stop failed %d\n", ret);
 			return ret;
 		}
+	}
 
 	/*
 	 * Enter clock stop mode and only report errors if there are
@@ -1462,7 +1464,7 @@ int sdw_cdns_clock_stop(struct sdw_cdns *cdns, bool block_wake)
 	 */
 	ret = sdw_bus_clk_stop(&cdns->bus);
 	if (ret < 0 && slave_present && ret != -ENODATA) {
-		dev_err(cdns->dev, "bus clock stop failed %d", ret);
+		dev_err(cdns->dev, "bus clock stop failed %d\n", ret);
 		return ret;
 	}
 

drivers/soundwire/dmi-quirks.c

+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// Copyright(c) 2021 Intel Corporation.
+
+/*
+ * Soundwire DMI quirks
+ */
+
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/soundwire/sdw.h>
+#include "bus.h"
+
+struct adr_remap {
+	u64 adr;
+	u64 remapped_adr;
+};
+
+/*
+ * HP Spectre 360 Convertible devices do not expose the correct _ADR
+ * in the DSDT.
+ * Remap the bad _ADR values to the ones reported by hardware
+ */
+static const struct adr_remap hp_spectre_360[] = {
+	{
+		0x000010025D070100,
+		0x000020025D071100
+	},
+	{
+		0x000110025d070100,
+		0x000120025D130800
+	},
+	{}
+};
+
+/*
+ * The initial version of the Dell SKU 0A3E did not expose the devices
+ * on the correct links.
+ */
+static const struct adr_remap dell_sku_0A3E[] = {
+	/* rt715 on link0 */
+	{
+		0x00020025d071100,
+		0x00021025d071500
+	},
+	/* rt711 on link1 */
+	{
+		0x000120025d130800,
+		0x000120025d071100,
+	},
+	/* rt1308 on link2 */
+	{
+		0x000220025d071500,
+		0x000220025d130800
+	},
+	{}
+};
+
+static const struct dmi_system_id adr_remap_quirk_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible"),
+		},
+		.driver_data = (void *)hp_spectre_360,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0A3E")
+		},
+		.driver_data = (void *)dell_sku_0A3E,
+	},
+	{}
+};
+
+u64 sdw_dmi_override_adr(struct sdw_bus *bus, u64 addr)
+{
+	const struct dmi_system_id *dmi_id;
+
+	/* check if any address remap quirk applies */
+	dmi_id = dmi_first_match(adr_remap_quirk_table);
+	if (dmi_id) {
+		struct adr_remap *map = dmi_id->driver_data;
+
+		for (map = dmi_id->driver_data; map->adr; map++) {
+			if (map->adr == addr) {
+				dev_dbg(bus->dev, "remapped _ADR 0x%llx as 0x%llx\n",
+					addr, map->remapped_adr);
+				addr = map->remapped_adr;
+				break;
+			}
+		}
+	}
+
+	return addr;
+}

drivers/soundwire/generic_bandwidth_allocation.c

@@ -62,7 +62,7 @@ static void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt,
 					      sample_int, port_bo, port_bo >> 8,
 					      t_data->hstart,
 					      t_data->hstop,
-					      (SDW_BLK_GRP_CNT_1 * ch), 0x0);
+					      SDW_BLK_PKG_PER_PORT, 0x0);
 
 			sdw_fill_port_params(&p_rt->port_params,
 					     p_rt->num, bps,
@@ -95,7 +95,7 @@ static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt,
 	struct sdw_bus *bus = m_rt->bus;
 	struct sdw_bus_params *b_params = &bus->params;
 	int sample_int, hstart = 0;
-	unsigned int rate, bps, ch, no_ch;
+	unsigned int rate, bps, ch;
 
 	rate = m_rt->stream->params.rate;
 	bps = m_rt->stream->params.bps;
@@ -110,12 +110,11 @@ static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt,
 	t_data.hstart = hstart;
 
 	list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
-		no_ch = sdw_ch_mask_to_ch(p_rt->ch_mask);
 
 		sdw_fill_xport_params(&p_rt->transport_params, p_rt->num,
 				      false, SDW_BLK_GRP_CNT_1, sample_int,
 				      port_bo, port_bo >> 8, hstart, hstop,
-				      (SDW_BLK_GRP_CNT_1 * no_ch), 0x0);
+				      SDW_BLK_PKG_PER_PORT, 0x0);
 
 		sdw_fill_port_params(&p_rt->port_params,
 				     p_rt->num, bps,
@@ -143,7 +142,7 @@ static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt,
 static void _sdw_compute_port_params(struct sdw_bus *bus,
 				     struct sdw_group_params *params, int count)
 {
-	struct sdw_master_runtime *m_rt = NULL;
+	struct sdw_master_runtime *m_rt;
 	int hstop = bus->params.col - 1;
 	int block_offset, port_bo, i;
 
@@ -169,7 +168,7 @@ static int sdw_compute_group_params(struct sdw_bus *bus,
 				    struct sdw_group_params *params,
 				    int *rates, int count)
 {
-	struct sdw_master_runtime *m_rt = NULL;
+	struct sdw_master_runtime *m_rt;
 	int sel_col = bus->params.col;
 	unsigned int rate, bps, ch;
 	int i, column_needed = 0;
@@ -406,14 +405,14 @@ int sdw_compute_params(struct sdw_bus *bus)
 	/* Computes clock frequency, frame shape and frame frequency */
 	ret = sdw_compute_bus_params(bus);
 	if (ret < 0) {
-		dev_err(bus->dev, "Compute bus params failed: %d", ret);
+		dev_err(bus->dev, "Compute bus params failed: %d\n", ret);
 		return ret;
 	}
 
 	/* Compute transport and port params */
 	ret = sdw_compute_port_params(bus);
 	if (ret < 0) {
-		dev_err(bus->dev, "Compute transport params failed: %d", ret);
+		dev_err(bus->dev, "Compute transport params failed: %d\n", ret);
 		return ret;
 	}
 

drivers/soundwire/intel.c

@@ -561,8 +561,6 @@ static int intel_link_power_down(struct sdw_intel *sdw)
 		ret = intel_clear_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
 	}
 
-	link_control = intel_readl(shim, SDW_SHIM_LCTL);
-
 	mutex_unlock(sdw->link_res->shim_lock);
 
 	if (ret < 0) {
@@ -997,7 +995,7 @@ static int intel_prepare(struct snd_pcm_substream *substream,
 
 	dma = snd_soc_dai_get_dma_data(dai, substream);
 	if (!dma) {
-		dev_err(dai->dev, "failed to get dma data in %s",
+		dev_err(dai->dev, "failed to get dma data in %s\n",
 			__func__);
 		return -EIO;
 	}
@@ -1061,7 +1059,7 @@ intel_hw_free(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
 
 	ret = intel_free_stream(sdw, substream, dai, sdw->instance);
 	if (ret < 0) {
-		dev_err(dai->dev, "intel_free_stream: failed %d", ret);
+		dev_err(dai->dev, "intel_free_stream: failed %d\n", ret);
 		return ret;
 	}
 
@@ -1286,6 +1284,9 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
 	if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
 		prop->hw_disabled = true;
 
+	prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH |
+		SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY;
+
 	return 0;
 }
 
@@ -1302,6 +1303,7 @@ static int intel_prop_read(struct sdw_bus *bus)
 
 static struct sdw_master_ops sdw_intel_ops = {
 	.read_prop = sdw_master_read_prop,
+	.override_adr = sdw_dmi_override_adr,
 	.xfer_msg = cdns_xfer_msg,
 	.xfer_msg_defer = cdns_xfer_msg_defer,
 	.reset_page_addr = cdns_reset_page_addr,
@@ -1630,7 +1632,7 @@ static int __maybe_unused intel_suspend(struct device *dev)
 
 	ret = intel_link_power_down(sdw);
 	if (ret) {
-		dev_err(dev, "Link power down failed: %d", ret);
+		dev_err(dev, "Link power down failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1665,7 +1667,7 @@ static int __maybe_unused intel_suspend_runtime(struct device *dev)
 
 		ret = intel_link_power_down(sdw);
 		if (ret) {
-			dev_err(dev, "Link power down failed: %d", ret);
+			dev_err(dev, "Link power down failed: %d\n", ret);
 			return ret;
 		}
 
@@ -1689,7 +1691,7 @@ static int __maybe_unused intel_suspend_runtime(struct device *dev)
 
 		ret = intel_link_power_down(sdw);
 		if (ret) {
-			dev_err(dev, "Link power down failed: %d", ret);
+			dev_err(dev, "Link power down failed: %d\n", ret);
 			return ret;
 		}
 
@@ -1738,7 +1740,7 @@ static int __maybe_unused intel_resume(struct device *dev)
 
 	ret = intel_init(sdw);
 	if (ret) {
-		dev_err(dev, "%s failed: %d", __func__, ret);
+		dev_err(dev, "%s failed: %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -1822,7 +1824,7 @@ static int __maybe_unused intel_resume_runtime(struct device *dev)
 	if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) {
 		ret = intel_init(sdw);
 		if (ret) {
-			dev_err(dev, "%s failed: %d", __func__, ret);
+			dev_err(dev, "%s failed: %d\n", __func__, ret);
 			return ret;
 		}
 
@@ -1867,7 +1869,7 @@ static int __maybe_unused intel_resume_runtime(struct device *dev)
 	} else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) {
 		ret = intel_init(sdw);
 		if (ret) {
-			dev_err(dev, "%s failed: %d", __func__, ret);
+			dev_err(dev, "%s failed: %d\n", __func__, ret);
 			return ret;
 		}
 
@@ -1945,7 +1947,7 @@ static int __maybe_unused intel_resume_runtime(struct device *dev)
 
 		ret = intel_init(sdw);
 		if (ret) {
-			dev_err(dev, "%s failed: %d", __func__, ret);
+			dev_err(dev, "%s failed: %d\n", __func__, ret);
 			return ret;
 		}
 

drivers/soundwire/intel_init.c

@@ -178,6 +178,15 @@ static struct sdw_intel_ctx
 		link->pdev = pdev;
 		link->cdns = platform_get_drvdata(pdev);
 
+		if (!link->cdns) {
+			dev_err(&adev->dev, "failed to get link->cdns\n");
+			/*
+			 * 1 will be subtracted from i in the err label, but we need to call
+			 * intel_link_dev_unregister for this ldev, so plus 1 now
+			 */
+			i++;
+			goto err;
+		}
 		list_add_tail(&link->list, &ctx->link_list);
 		bus = &link->cdns->bus;
 		/* Calculate number of slaves */

drivers/soundwire/slave.c

@@ -88,6 +88,7 @@ int sdw_slave_add(struct sdw_bus *bus,
 
 	return ret;
 }
+EXPORT_SYMBOL(sdw_slave_add);
 
 #if IS_ENABLED(CONFIG_ACPI)
 
@@ -95,7 +96,7 @@ static bool find_slave(struct sdw_bus *bus,
 		       struct acpi_device *adev,
 		       struct sdw_slave_id *id)
 {
-	unsigned long long addr;
+	u64 addr;
 	unsigned int link_id;
 	acpi_status status;
 
@@ -108,6 +109,12 @@ static bool find_slave(struct sdw_bus *bus,
 		return false;
 	}
 
+	if (bus->ops->override_adr)
+		addr = bus->ops->override_adr(bus, addr);
+
+	if (!addr)
+		return false;
+
 	/* Extract link id from ADR, Bit 51 to 48 (included) */
 	link_id = SDW_DISCO_LINK_ID(addr);
 

drivers/soundwire/stream.c

@@ -261,7 +261,7 @@ static int sdw_program_master_port_params(struct sdw_bus *bus,
  */
 static int sdw_program_port_params(struct sdw_master_runtime *m_rt)
 {
-	struct sdw_slave_runtime *s_rt = NULL;
+	struct sdw_slave_runtime *s_rt;
 	struct sdw_bus *bus = m_rt->bus;
 	struct sdw_port_runtime *p_rt;
 	int ret = 0;
@@ -1375,8 +1375,16 @@ int sdw_stream_add_slave(struct sdw_slave *slave,
 	}
 
 	ret = sdw_config_stream(&slave->dev, stream, stream_config, true);
-	if (ret)
+	if (ret) {
+		/*
+		 * sdw_release_master_stream will release s_rt in slave_rt_list in
+		 * stream_error case, but s_rt is only added to slave_rt_list
+		 * when sdw_config_stream is successful, so free s_rt explicitly
+		 * when sdw_config_stream is failed.
+		 */
+		kfree(s_rt);
 		goto stream_error;
+	}
 
 	list_add_tail(&s_rt->m_rt_node, &m_rt->slave_rt_list);
 
@@ -1449,7 +1457,7 @@ struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
 static void sdw_acquire_bus_lock(struct sdw_stream_runtime *stream)
 {
 	struct sdw_master_runtime *m_rt;
-	struct sdw_bus *bus = NULL;
+	struct sdw_bus *bus;
 
 	/* Iterate for all Master(s) in Master list */
 	list_for_each_entry(m_rt, &stream->master_list, stream_node) {
@@ -1470,8 +1478,8 @@ static void sdw_acquire_bus_lock(struct sdw_stream_runtime *stream)
  */
 static void sdw_release_bus_lock(struct sdw_stream_runtime *stream)
 {
-	struct sdw_master_runtime *m_rt = NULL;
-	struct sdw_bus *bus = NULL;
+	struct sdw_master_runtime *m_rt;
+	struct sdw_bus *bus;
 
 	/* Iterate for all Master(s) in Master list */
 	list_for_each_entry_reverse(m_rt, &stream->master_list, stream_node) {
@@ -1513,7 +1521,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream,
 		if (bus->compute_params) {
 			ret = bus->compute_params(bus);
 			if (ret < 0) {
-				dev_err(bus->dev, "Compute params failed: %d",
+				dev_err(bus->dev, "Compute params failed: %d\n",
 					ret);
 				return ret;
 			}
@@ -1791,7 +1799,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 		if (bus->compute_params) {
 			ret = bus->compute_params(bus);
 			if (ret < 0) {
-				dev_err(bus->dev, "Compute params failed: %d",
+				dev_err(bus->dev, "Compute params failed: %d\n",
 					ret);
 				return ret;
 			}
@@ -1855,7 +1863,7 @@ static int set_stream(struct snd_pcm_substream *substream,
 	for_each_rtd_dais(rtd, i, dai) {
 		ret = snd_soc_dai_set_sdw_stream(dai, sdw_stream, substream->stream);
 		if (ret < 0) {
-			dev_err(rtd->dev, "failed to set stream pointer on dai %s", dai->name);
+			dev_err(rtd->dev, "failed to set stream pointer on dai %s\n", dai->name);
 			break;
 		}
 	}
@@ -1888,7 +1896,7 @@ int sdw_startup_stream(void *sdw_substream)
 
 	sdw_stream = sdw_alloc_stream(name);
 	if (!sdw_stream) {
-		dev_err(rtd->dev, "alloc stream failed for substream DAI %s", substream->name);
+		dev_err(rtd->dev, "alloc stream failed for substream DAI %s\n", substream->name);
 		ret = -ENOMEM;
 		goto error;
 	}
@@ -1927,7 +1935,7 @@ void sdw_shutdown_stream(void *sdw_substream)
 	sdw_stream = snd_soc_dai_get_sdw_stream(dai, substream->stream);
 
 	if (IS_ERR(sdw_stream)) {
-		dev_err(rtd->dev, "no stream found for DAI %s", dai->name);
+		dev_err(rtd->dev, "no stream found for DAI %s\n", dai->name);
 		return;
 	}
 

include/linux/soundwire/sdw.h

@@ -125,6 +125,12 @@ enum sdw_dpn_grouping {
 	SDW_BLK_GRP_CNT_4 = 3,
 };
 
+/* block packing mode enum */
+enum sdw_dpn_pkg_mode {
+	SDW_BLK_PKG_PER_PORT = 0,
+	SDW_BLK_PKG_PER_CHANNEL = 1
+};
+
 /**
  * enum sdw_stream_type: data stream type
  *
@@ -405,6 +411,7 @@ struct sdw_slave_prop {
  * command
  * @mclk_freq: clock reference passed to SoundWire Master, in Hz.
  * @hw_disabled: if true, the Master is not functional, typically due to pin-mux
+ * @quirks: bitmask identifying optional behavior beyond the scope of the MIPI specification
  */
 struct sdw_master_prop {
 	u32 revision;
@@ -421,8 +428,29 @@ struct sdw_master_prop {
 	u32 err_threshold;
 	u32 mclk_freq;
 	bool hw_disabled;
+	u64 quirks;
 };
 
+/* Definitions for Master quirks */
+
+/*
+ * In a number of platforms bus clashes are reported after a hardware
+ * reset but without any explanations or evidence of a real problem.
+ * The following quirk will discard all initial bus clash interrupts
+ * but will leave the detection on should real bus clashes happen
+ */
+#define SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH	BIT(0)
+
+/*
+ * Some Slave devices have known issues with incorrect parity errors
+ * reported after a hardware reset. However during integration unexplained
+ * parity errors can be reported by Slave devices, possibly due to electrical
+ * issues at the Master level.
+ * The following quirk will discard all initial parity errors but will leave
+ * the detection on should real parity errors happen.
+ */
+#define SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY	BIT(1)
+
 int sdw_master_read_prop(struct sdw_bus *bus);
 int sdw_slave_read_prop(struct sdw_slave *slave);
 
@@ -614,6 +642,7 @@ struct sdw_slave_ops {
  * @debugfs: Slave debugfs
  * @node: node for bus list
  * @port_ready: Port ready completion flag for each Slave port
+ * @m_port_map: static Master port map for each Slave port
  * @dev_num: Current Device Number, values can be 0 or dev_num_sticky
  * @dev_num_sticky: one-time static Device Number assigned by Bus
  * @probed: boolean tracking driver state
@@ -645,6 +674,7 @@ struct sdw_slave {
 #endif
 	struct list_head node;
 	struct completion port_ready[SDW_MAX_PORTS];
+	unsigned int m_port_map[SDW_MAX_PORTS];
 	enum sdw_clk_stop_mode curr_clk_stop_mode;
 	u16 dev_num;
 	u16 dev_num_sticky;
@@ -804,6 +834,7 @@ struct sdw_defer {
 /**
  * struct sdw_master_ops - Master driver ops
  * @read_prop: Read Master properties
+ * @override_adr: Override value read from firmware (quirk for buggy firmware)
  * @xfer_msg: Transfer message callback
  * @xfer_msg_defer: Defer version of transfer message callback
  * @reset_page_addr: Reset the SCP page address registers
@@ -813,7 +844,8 @@ struct sdw_defer {
  */
 struct sdw_master_ops {
 	int (*read_prop)(struct sdw_bus *bus);
-
+	u64 (*override_adr)
+			(struct sdw_bus *bus, u64 addr);
 	enum sdw_command_response (*xfer_msg)
 			(struct sdw_bus *bus, struct sdw_msg *msg);
 	enum sdw_command_response (*xfer_msg_defer)
@@ -1009,5 +1041,7 @@ int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_read_no_pm(struct sdw_slave *slave, u32 addr);
 int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
 int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id);
+void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
 
 #endif /* __SOUNDWIRE_H */