[PATCH] 2.5.13 - i8xx series chipsets patches

i810-tco: Merge changes of the 2.4 kernel into the i810-tco module. Changes included are:
Support for 82801CA(M) chipset, timer margin needs to be > 3, support for WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT.

drivers/char/i810-tco.c

 /*
- *	i810-tco 0.03:	TCO timer driver for i810 chipsets
+ *	i810-tco 0.04:	TCO timer driver for i8xx chipsets
  *
  *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
  *				http://www.kernelconcepts.de
@@ -17,12 +17,14 @@
  *				developed for
  *                              Jentro AG, Haar/Munich (Germany)
  *
- *	TCO timer driver for i810/i815 chipsets
+ *	TCO timer driver for i8xx chipsets
  *	based on softdog.c by Alan Cox <alan@redhat.com>
  *
- *	The TCO timer is implemented in the 82801AA (82801AB) chip,
- *	see intel documentation from http://developer.intel.com,
- *	order number 290655-003
+ *	The TCO timer is implemented in the following I/O controller hubs:
+ *	(See the intel documentation on http://developer.intel.com.)
+ *	82801AA & 82801AB  chip : document number 290655-003, 290677-004,
+ *	82801BA & 82801BAM chip : document number 290687-002, 298242-005,
+ *	82801CA & 82801CAM chip : document number 290716-001, 290718-001
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -31,6 +33,9 @@
  *  20011214 Matt Domsch <Matt_Domsch@dell.com>
  *	0.03 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
  *	     Didn't add timeout option as i810_margin already exists.
+ *  20020224 Joel Becker, Wim Van Sebroeck
+ *	0.04 Support for 82801CA(M) chipset, timer margin needs to be > 3,
+ *	     add support for WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT.
  */
  
 #include <linux/module.h>
@@ -49,13 +54,13 @@
 #include "i810-tco.h"
 
 
-/* Just in case that the PCI vendor and device IDs are not yet defined */
-#ifndef PCI_DEVICE_ID_INTEL_82801AA_0
-#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
-#endif
+/* Module and version information */
+#define TCO_VERSION "0.04"
+#define TCO_MODULE_NAME "i810 TCO timer"
+#define TCO_DRIVER_NAME   TCO_MODULE_NAME " , " TCO_VERSION
 
 /* Default expire timeout */
-#define TIMER_MARGIN	50	/* steps of 0.6sec, 2<n<64. Default is 30 seconds */
+#define TIMER_MARGIN	50	/* steps of 0.6sec, 3<n<64. Default is 30 seconds */
 
 static unsigned int ACPIBASE;
 static spinlock_t tco_lock;	/* Guards the hardware */
@@ -63,7 +68,7 @@ static spinlock_t tco_lock;	/* Guards the hardware */
 static int i810_margin = TIMER_MARGIN;	/* steps of 0.6sec */
 
 MODULE_PARM (i810_margin, "i");
-MODULE_PARM_DESC(i810_margin, "Watchdog timeout in steps of 0.6sec, 2<n<64. Default = 50 (30 seconds)");
+MODULE_PARM_DESC(i810_margin, "Watchdog timeout in steps of 0.6sec, 3<n<64. Default = 50 (30 seconds)");
 
 
 #ifdef CONFIG_WATCHDOG_NOWAYOUT
@@ -84,7 +89,7 @@ static int timer_alive;
 static int boot_status;
 
 /*
- * Some i810 specific functions
+ * Some TCO specific functions
  */
 
 
@@ -135,7 +140,7 @@ static int tco_timer_settimer (unsigned char tmrval)
 
 	/* from the specs: */
 	/* "Values of 0h-3h are ignored and should not be attempted" */
-	if (tmrval > 0x3f || tmrval < 0x03)
+	if (tmrval > 0x3f || tmrval < 0x04)
 		return -1;
 	
 	spin_lock(&tco_lock);
@@ -226,8 +231,10 @@ static ssize_t i810tco_write (struct file *file, const char *data,
 static int i810tco_ioctl (struct inode *inode, struct file *file,
 			  unsigned int cmd, unsigned long arg)
 {
+	int new_margin, u_margin;
+
 	static struct watchdog_info ident = {
-		0,
+		WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 		0,
 		"i810 TCO timer"
 	};
@@ -247,6 +254,19 @@ static int i810tco_ioctl (struct inode *inode, struct file *file,
 	case WDIOC_KEEPALIVE:
 		tco_timer_reload ();
 		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(u_margin, (int *) arg))
+			return -EFAULT;
+		new_margin = (u_margin * 10 + 5) / 6;
+		if ((new_margin < 4) || (new_margin > 63))
+			return -EINVAL;
+		if (tco_timer_settimer((unsigned char)new_margin))
+		    return -EINVAL;
+		i810_margin = new_margin;
+		tco_timer_reload();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user((int)(i810_margin * 6 / 10), (int *) arg);
 	}
 }
 
@@ -263,6 +283,8 @@ static struct pci_device_id i810tco_pci_tbl[] __initdata = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE (pci, i810tco_pci_tbl);
@@ -297,7 +319,7 @@ static unsigned char i810tco_getdevice (void)
 		ACPIBASE = badr;
 		/* Something's wrong here, ACPIBASE has to be set */
 		if (badr == 0x0001 || badr == 0x0000) {
-			printk (KERN_ERR "i810tco init: failed to get TCOBASE address\n");
+			printk (KERN_ERR TCO_MODULE_NAME " init: failed to get TCOBASE address\n");
 			return 0;
 		}
 		/*
@@ -309,7 +331,7 @@ static unsigned char i810tco_getdevice (void)
 			pci_write_config_byte (i810tco_pci, 0xd4, val1);
 			pci_read_config_byte (i810tco_pci, 0xd4, &val1);
 			if (val1 & 0x02) {
-				printk (KERN_ERR "i810tco init: failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+				printk (KERN_ERR TCO_MODULE_NAME " init: failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
 				return 0;	/* Cannot reset NO_REBOOT bit */
 			}
 		}
@@ -346,22 +368,22 @@ static int __init watchdog_init (void)
 	if (!i810tco_getdevice () || i810tco_pci == NULL)
 		return -ENODEV;
 	if (!request_region (TCOBASE, 0x10, "i810 TCO")) {
-		printk (KERN_ERR
-			"i810 TCO timer: I/O address 0x%04x already in use\n",
+		printk (KERN_ERR TCO_MODULE_NAME
+			": I/O address 0x%04x already in use\n",
 			TCOBASE);
 		return -EIO;
 	}
 	if (misc_register (&i810tco_miscdev) != 0) {
 		release_region (TCOBASE, 0x10);
-		printk (KERN_ERR "i810 TCO timer: cannot register miscdev\n");
+		printk (KERN_ERR TCO_MODULE_NAME ": cannot register miscdev\n");
 		return -EIO;
 	}
 	tco_timer_settimer ((unsigned char) i810_margin);
 	tco_timer_reload ();
 
-	printk (KERN_INFO
-		"i810 TCO timer: V0.03, timer margin: %d sec (0x%04x), nowayout: %d\n",
-		(int) (i810_margin * 6 / 10), TCOBASE, nowayout);
+	printk (KERN_INFO TCO_DRIVER_NAME
+		": timer margin: %d sec (0x%04x)\n",
+		(int) (i810_margin * 6 / 10), TCOBASE);
 	return 0;
 }
 

drivers/char/i810-tco.h

 /*
- *	i810-tco 0.02:	TCO timer driver for i810 chipsets
+ *	i810-tco 0.04:	TCO timer driver for i8xx chipsets
  *
  *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
  *				http://www.kernelconcepts.de
@@ -17,12 +17,14 @@
  *				developed for
  *                              Jentro AG, Haar/Munich (Germany)
  *
- *	TCO timer driver for i810 chipsets
+ *	TCO timer driver for i8xx chipsets
  *	based on softdog.c by Alan Cox <alan@redhat.com>
  *
- *      The TCO timer is implemented in the 82801AA (82801AB) chip,
- *	see intel documentation from http://developer.intel.com,
- *	order number 290655-003
+ *	The TCO timer is implemented in the following I/O controller hubs:
+ *	(See the intel documentation on http://developer.intel.com.)
+ *	82801AA & 82801AB  chip : document number 290655-003, 290677-004,
+ *	82801BA & 82801BAM chip : document number 290687-002, 298242-005,
+ *	82801CA & 82801CAM chip : document number 290716-001, 290718-001
  *
  *	For history see i810-tco.c
  */