Merge branch 'selftests-net-switch-pmtu-sh-to-use-the-internal-ovs-script'

Aaron Conole says:

====================
selftests: net: Switch pmtu.sh to use the internal ovs script.

Currently, if a user wants to run pmtu.sh and cover all the provided test
cases, they need to install the Open vSwitch userspace utilities.  This
dependency is difficult for users as well as CI environments, because the
userspace build and setup may require lots of support and devel packages
to be installed, system setup to be correct, and things like permissions
and selinux policies to be properly configured.

The kernel selftest suite includes an ovs-dpctl.py utility which can
interact with the openvswitch module directly.  This lets developers and
CI environments run without needing too many extra dependencies - just
the pyroute2 python package.

This series enhances the ovs-dpctl utility to provide support for set()
and tunnel() flow specifiers, better ipv6 handling support, and the
ability to add tunnel vports, and LWT interfaces.  Finally, it modifies
the pmtu.sh script to call the ovs-dpctl.py utility rather than the
typical OVS userspace utilities.  The pmtu.sh can still fall back on
the Open vSwitch userspace utilities if the ovs-dpctl.py script can't
be used.
====================

Link: https://patch.msgid.link/20240625172245.233874-1-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tools/testing/selftests/net/config

@@ -74,7 +74,12 @@ CONFIG_NET_SCH_ETF=m
 CONFIG_NET_SCH_NETEM=y
 CONFIG_NET_SCH_PRIO=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NF_CONNTRACK_OVS=y
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GENEVE=m
+CONFIG_OPENVSWITCH_GRE=m
+CONFIG_OPENVSWITCH_VXLAN=m
 CONFIG_PSAMPLE=m
 CONFIG_TCP_MD5SIG=y
 CONFIG_TEST_BLACKHOLE_DEV=m

tools/testing/selftests/net/pmtu.sh

@@ -842,25 +842,97 @@ setup_bridge() {
 	run_cmd ${ns_a} ip link set veth_A-C master br0
 }
 
+setup_ovs_via_internal_utility() {
+	type="${1}"
+	a_addr="${2}"
+	b_addr="${3}"
+	dport="${4}"
+
+	run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 ${type}_a -t ${type} || return 1
+
+	ports=$(python3 ./openvswitch/ovs-dpctl.py show)
+	br0_port=$(echo "$ports" | grep -E "\sovs_br0" | sed -e 's@port @@' | cut -d: -f1 | xargs)
+	type_a_port=$(echo "$ports" | grep ${type}_a | sed -e 's@port @@' | cut -d: -f1 | xargs)
+	veth_a_port=$(echo "$ports" | grep veth_A | sed -e 's@port @@' | cut -d: -f1 | xargs)
+
+	v4_a_tun="${prefix4}.${a_r1}.1"
+	v4_b_tun="${prefix4}.${b_r1}.1"
+
+	v6_a_tun="${prefix6}:${a_r1}::1"
+	v6_b_tun="${prefix6}:${b_r1}::1"
+
+	if [ "${v4_a_tun}" = "${a_addr}" ]; then
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,src=${v4_b_tun},dst=${v4_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \
+		    "set(tunnel(tun_id=1,dst=${v4_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+	else
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0800),ipv4()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x86dd),ipv6()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),tunnel(tun_id=1,ipv6_src=${v6_b_tun},ipv6_dst=${v6_a_tun}),in_port(${type_a_port}),eth(),eth_type(0x0806),arp()" \
+		    "${veth_a_port}"
+		run_cmd python3 ./openvswitch/ovs-dpctl.py add-flow ovs_br0 \
+		    "recirc_id(0),in_port(${veth_a_port}),eth(),eth_type(0x0806),arp(sip=${veth4_c_addr},tip=${tunnel4_b_addr})" \
+		    "set(tunnel(tun_id=1,ipv6_dst=${v6_b_tun},ttl=64,tp_dst=${dport},flags(df|csum))),${type_a_port}"
+	fi
+}
+
+setup_ovs_via_vswitchd() {
+	type="${1}"
+	b_addr="${2}"
+
+	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
+		set interface ${type}_a type=${type} \
+		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
+}
+
 setup_ovs_vxlan_or_geneve() {
 	type="${1}"
 	a_addr="${2}"
 	b_addr="${3}"
+	dport="6081"
 
 	if [ "${type}" = "vxlan" ]; then
+		dport="4789"
 		opts="${opts} ttl 64 dstport 4789"
 		opts_b="local ${b_addr}"
 	fi
 
-	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
-		set interface ${type}_a type=${type} \
-		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
+	setup_ovs_via_internal_utility "${type}" "${a_addr}" "${b_addr}" \
+				       "${dport}" || \
+	    setup_ovs_via_vswitchd "${type}" "${b_addr}" || return 1
 
 	run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1
 
 	run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
 	run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
 
+	run_cmd ip link set ${type}_a up
 	run_cmd ${ns_b} ip link set ${type}_b up
 }
 
@@ -880,8 +952,24 @@ setup_ovs_vxlan6() {
 	setup_ovs_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
 }
 
+setup_ovs_br_internal() {
+	run_cmd python3 ./openvswitch/ovs-dpctl.py add-dp ovs_br0 || \
+		return 1
+}
+
+setup_ovs_br_vswitchd() {
+	run_cmd ovs-vsctl add-br ovs_br0 || return 1
+}
+
+setup_ovs_add_if() {
+	ifname="${1}"
+	run_cmd python3 ./openvswitch/ovs-dpctl.py add-if ovs_br0 \
+		"${ifname}" || \
+		run_cmd ovs-vsctl add-port ovs_br0 "${ifname}"
+}
+
 setup_ovs_bridge() {
-	run_cmd ovs-vsctl add-br ovs_br0 || return $ksft_skip
+	setup_ovs_br_internal || setup_ovs_br_vswitchd || return $ksft_skip
 	run_cmd ip link set ovs_br0 up
 
 	run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
@@ -891,7 +979,7 @@ setup_ovs_bridge() {
 	run_cmd ${ns_c} ip link set veth_C-A up
 	run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A
 	run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A
-	run_cmd ovs-vsctl add-port ovs_br0 veth_A-C
+	setup_ovs_add_if veth_A-C
 
 	# Move veth_A-R1 to init
 	run_cmd ${ns_a} ip link set veth_A-R1 netns 1
@@ -922,6 +1010,18 @@ trace() {
 	sleep 1
 }
 
+cleanup_del_ovs_internal() {
+	# squelch the output of the del-if commands since it can be wordy
+	python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true vxlan_a	>/dev/null	2>&1
+	python3 ./openvswitch/ovs-dpctl.py del-if ovs_br0 -d true geneve_a	>/dev/null	2>&1
+	python3 ./openvswitch/ovs-dpctl.py del-dp ovs_br0			>/dev/null	2>&1
+}
+
+cleanup_del_ovs_vswitchd() {
+	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
+	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
+}
+
 cleanup() {
 	for pid in ${tcpdump_pids}; do
 		kill ${pid}
@@ -942,8 +1042,8 @@ cleanup() {
 
 	ip link del veth_A-C		2>/dev/null
 	ip link del veth_A-R1		2>/dev/null
-	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
-	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
+	cleanup_del_ovs_internal
+	cleanup_del_ovs_vswitchd
 	rm -f "$tmpoutfile"
 }
 
@@ -1397,6 +1497,12 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
 	outer_family=${3}
 	ll_mtu=4000
 
+	if [ "${type}" = "vxlan" ]; then
+		tun_a="vxlan_sys_4789"
+	elif [ "${type}" = "geneve" ]; then
+		tun_a="genev_sys_6081"
+	fi
+
 	if [ ${outer_family} -eq 4 ]; then
 		setup namespaces routing ovs_bridge ovs_${type}4 || return $ksft_skip
 		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
@@ -1407,17 +1513,11 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
 		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
 	fi
 
-	if [ "${type}" = "vxlan" ]; then
-		tun_a="vxlan_sys_4789"
-	elif [ "${type}" = "geneve" ]; then
-		tun_a="genev_sys_6081"
-	fi
-
-	trace ""        "${tun_a}"  "${ns_b}"  ${type}_b \
+	trace ""        ${type}_a    "${ns_b}"  ${type}_b \
 	      ""        veth_A-R1    "${ns_r1}" veth_R1-A \
 	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B \
-	      ""        ovs_br0     ""         veth-A-C  \
-	      "${ns_c}" veth_C-A
+	      ""        ovs_br0      ""         veth-A_C  \
+	      "${ns_c}" veth_C-A     ""         "${tun_a}"
 
 	if [ ${family} -eq 4 ]; then
 		ping=ping
@@ -1436,7 +1536,8 @@ test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
 	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
 	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
 
-	mtu ""        ${tun_a}  $((${ll_mtu} + 1000))
+	mtu ""        ${tun_a}  $((${ll_mtu} + 1000)) 2>/dev/null || \
+		mtu ""        ${type}_a  $((${ll_mtu} + 1000)) 2>/dev/null
 	mtu "${ns_b}" ${type}_b  $((${ll_mtu} + 1000))
 
 	run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1