Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull Intel TDX support from Borislav Petkov:
 "Intel Trust Domain Extensions (TDX) support.

  This is the Intel version of a confidential computing solution called
  Trust Domain Extensions (TDX). This series adds support to run the
  kernel as part of a TDX guest. It provides similar guest protections
  to AMD's SEV-SNP like guest memory and register state encryption,
  memory integrity protection and a lot more.

  Design-wise, it differs from AMD's solution considerably: it uses a
  software module which runs in a special CPU mode called (Secure
  Arbitration Mode) SEAM. As the name suggests, this module serves as
  sort of an arbiter which the confidential guest calls for services it
  needs during its lifetime.

  Just like AMD's SNP set, this series reworks and streamlines certain
  parts of x86 arch code so that this feature can be properly
  accomodated"

* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  x86/tdx: Fix RETs in TDX asm
  x86/tdx: Annotate a noreturn function
  x86/mm: Fix spacing within memory encryption features message
  x86/kaslr: Fix build warning in KASLR code in boot stub
  Documentation/x86: Document TDX kernel architecture
  ACPICA: Avoid cache flush inside virtual machines
  x86/tdx/ioapic: Add shared bit for IOAPIC base address
  x86/mm: Make DMA memory shared for TD guest
  x86/mm/cpa: Add support for TDX shared memory
  x86/tdx: Make pages shared in ioremap()
  x86/topology: Disable CPU online/offline control for TDX guests
  x86/boot: Avoid #VE during boot for TDX platforms
  x86/boot: Set CR0.NE early and keep it set during the boot
  x86/acpi/x86/boot: Add multiprocessor wake-up support
  x86/boot: Add a trampoline for booting APs via firmware handoff
  x86/tdx: Wire up KVM hypercalls
  x86/tdx: Port I/O: Add early boot support
  x86/tdx: Port I/O: Add runtime hypercalls
  x86/boot: Port I/O: Add decompression-time support for TDX
  x86/boot: Port I/O: Allow to hook up alternative helpers
  ...

Documentation/x86/index.rst

@@ -26,6 +26,7 @@ x86-specific Documentation
    intel_txt
    amd-memory-encryption
    amd_hsmp
+   tdx
    pti
    mds
    microcode

Documentation/x86/tdx.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Intel Trust Domain Extensions (TDX)
+=====================================
+
+Intel's Trust Domain Extensions (TDX) protect confidential guest VMs from
+the host and physical attacks by isolating the guest register state and by
+encrypting the guest memory. In TDX, a special module running in a special
+mode sits between the host and the guest and manages the guest/host
+separation.
+
+Since the host cannot directly access guest registers or memory, much
+normal functionality of a hypervisor must be moved into the guest. This is
+implemented using a Virtualization Exception (#VE) that is handled by the
+guest kernel. A #VE is handled entirely inside the guest kernel, but some
+require the hypervisor to be consulted.
+
+TDX includes new hypercall-like mechanisms for communicating from the
+guest to the hypervisor or the TDX module.
+
+New TDX Exceptions
+==================
+
+TDX guests behave differently from bare-metal and traditional VMX guests.
+In TDX guests, otherwise normal instructions or memory accesses can cause
+#VE or #GP exceptions.
+
+Instructions marked with an '*' conditionally cause exceptions.  The
+details for these instructions are discussed below.
+
+Instruction-based #VE
+---------------------
+
+- Port I/O (INS, OUTS, IN, OUT)
+- HLT
+- MONITOR, MWAIT
+- WBINVD, INVD
+- VMCALL
+- RDMSR*,WRMSR*
+- CPUID*
+
+Instruction-based #GP
+---------------------
+
+- All VMX instructions: INVEPT, INVVPID, VMCLEAR, VMFUNC, VMLAUNCH,
+  VMPTRLD, VMPTRST, VMREAD, VMRESUME, VMWRITE, VMXOFF, VMXON
+- ENCLS, ENCLU
+- GETSEC
+- RSM
+- ENQCMD
+- RDMSR*,WRMSR*
+
+RDMSR/WRMSR Behavior
+--------------------
+
+MSR access behavior falls into three categories:
+
+- #GP generated
+- #VE generated
+- "Just works"
+
+In general, the #GP MSRs should not be used in guests.  Their use likely
+indicates a bug in the guest.  The guest may try to handle the #GP with a
+hypercall but it is unlikely to succeed.
+
+The #VE MSRs are typically able to be handled by the hypervisor.  Guests
+can make a hypercall to the hypervisor to handle the #VE.
+
+The "just works" MSRs do not need any special guest handling.  They might
+be implemented by directly passing through the MSR to the hardware or by
+trapping and handling in the TDX module.  Other than possibly being slow,
+these MSRs appear to function just as they would on bare metal.
+
+CPUID Behavior
+--------------
+
+For some CPUID leaves and sub-leaves, the virtualized bit fields of CPUID
+return values (in guest EAX/EBX/ECX/EDX) are configurable by the
+hypervisor. For such cases, the Intel TDX module architecture defines two
+virtualization types:
+
+- Bit fields for which the hypervisor controls the value seen by the guest
+  TD.
+
+- Bit fields for which the hypervisor configures the value such that the
+  guest TD either sees their native value or a value of 0.  For these bit
+  fields, the hypervisor can mask off the native values, but it can not
+  turn *on* values.
+
+A #VE is generated for CPUID leaves and sub-leaves that the TDX module does
+not know how to handle. The guest kernel may ask the hypervisor for the
+value with a hypercall.
+
+#VE on Memory Accesses
+======================
+
+There are essentially two classes of TDX memory: private and shared.
+Private memory receives full TDX protections.  Its content is protected
+against access from the hypervisor.  Shared memory is expected to be
+shared between guest and hypervisor and does not receive full TDX
+protections.
+
+A TD guest is in control of whether its memory accesses are treated as
+private or shared.  It selects the behavior with a bit in its page table
+entries.  This helps ensure that a guest does not place sensitive
+information in shared memory, exposing it to the untrusted hypervisor.
+
+#VE on Shared Memory
+--------------------
+
+Access to shared mappings can cause a #VE.  The hypervisor ultimately
+controls whether a shared memory access causes a #VE, so the guest must be
+careful to only reference shared pages it can safely handle a #VE.  For
+instance, the guest should be careful not to access shared memory in the
+#VE handler before it reads the #VE info structure (TDG.VP.VEINFO.GET).
+
+Shared mapping content is entirely controlled by the hypervisor. The guest
+should only use shared mappings for communicating with the hypervisor.
+Shared mappings must never be used for sensitive memory content like kernel
+stacks.  A good rule of thumb is that hypervisor-shared memory should be
+treated the same as memory mapped to userspace.  Both the hypervisor and
+userspace are completely untrusted.
+
+MMIO for virtual devices is implemented as shared memory.  The guest must
+be careful not to access device MMIO regions unless it is also prepared to
+handle a #VE.
+
+#VE on Private Pages
+--------------------
+
+An access to private mappings can also cause a #VE.  Since all kernel
+memory is also private memory, the kernel might theoretically need to
+handle a #VE on arbitrary kernel memory accesses.  This is not feasible, so
+TDX guests ensure that all guest memory has been "accepted" before memory
+is used by the kernel.
+
+A modest amount of memory (typically 512M) is pre-accepted by the firmware
+before the kernel runs to ensure that the kernel can start up without
+being subjected to a #VE.
+
+The hypervisor is permitted to unilaterally move accepted pages to a
+"blocked" state. However, if it does this, page access will not generate a
+#VE.  It will, instead, cause a "TD Exit" where the hypervisor is required
+to handle the exception.
+
+Linux #VE handler
+=================
+
+Just like page faults or #GP's, #VE exceptions can be either handled or be
+fatal.  Typically, an unhandled userspace #VE results in a SIGSEGV.
+An unhandled kernel #VE results in an oops.
+
+Handling nested exceptions on x86 is typically nasty business.  A #VE
+could be interrupted by an NMI which triggers another #VE and hilarity
+ensues.  The TDX #VE architecture anticipated this scenario and includes a
+feature to make it slightly less nasty.
+
+During #VE handling, the TDX module ensures that all interrupts (including
+NMIs) are blocked.  The block remains in place until the guest makes a
+TDG.VP.VEINFO.GET TDCALL.  This allows the guest to control when interrupts
+or a new #VE can be delivered.
+
+However, the guest kernel must still be careful to avoid potential
+#VE-triggering actions (discussed above) while this block is in place.
+While the block is in place, any #VE is elevated to a double fault (#DF)
+which is not recoverable.
+
+MMIO handling
+=============
+
+In non-TDX VMs, MMIO is usually implemented by giving a guest access to a
+mapping which will cause a VMEXIT on access, and then the hypervisor
+emulates the access.  That is not possible in TDX guests because VMEXIT
+will expose the register state to the host. TDX guests don't trust the host
+and can't have their state exposed to the host.
+
+In TDX, MMIO regions typically trigger a #VE exception in the guest.  The
+guest #VE handler then emulates the MMIO instruction inside the guest and
+converts it into a controlled TDCALL to the host, rather than exposing
+guest state to the host.
+
+MMIO addresses on x86 are just special physical addresses. They can
+theoretically be accessed with any instruction that accesses memory.
+However, the kernel instruction decoding method is limited. It is only
+designed to decode instructions like those generated by io.h macros.
+
+MMIO access via other means (like structure overlays) may result in an
+oops.
+
+Shared Memory Conversions
+=========================
+
+All TDX guest memory starts out as private at boot.  This memory can not
+be accessed by the hypervisor.  However, some kernel users like device
+drivers might have a need to share data with the hypervisor.  To do this,
+memory must be converted between shared and private.  This can be
+accomplished using some existing memory encryption helpers:
+
+ * set_memory_decrypted() converts a range of pages to shared.
+ * set_memory_encrypted() converts memory back to private.
+
+Device drivers are the primary user of shared memory, but there's no need
+to touch every driver. DMA buffers and ioremap() do the conversions
+automatically.
+
+TDX uses SWIOTLB for most DMA allocations. The SWIOTLB buffer is
+converted to shared on boot.
+
+For coherent DMA allocation, the DMA buffer gets converted on the
+allocation. Check force_dma_unencrypted() for details.
+
+References
+==========
+
+TDX reference material is collected here:
+
+https://www.intel.com/content/www/us/en/developer/articles/technical/intel-trust-domain-extensions.html

arch/x86/Kconfig

@@ -878,6 +878,21 @@ config ACRN_GUEST
 	  IOT with small footprint and real-time features. More details can be
 	  found in https://projectacrn.org/.
 
+config INTEL_TDX_GUEST
+	bool "Intel TDX (Trust Domain Extensions) - Guest Support"
+	depends on X86_64 && CPU_SUP_INTEL
+	depends on X86_X2APIC
+	select ARCH_HAS_CC_PLATFORM
+	select X86_MEM_ENCRYPT
+	select X86_MCE
+	help
+	  Support running as a guest under Intel TDX.  Without this support,
+	  the guest kernel can not boot or run under TDX.
+	  TDX includes memory encryption and integrity capabilities
+	  which protect the confidentiality and integrity of guest
+	  memory contents and CPU state. TDX guests are protected from
+	  some attacks from the VMM.
+
 endif #HYPERVISOR_GUEST
 
 source "arch/x86/Kconfig.cpu"

arch/x86/boot/boot.h

@@ -26,6 +26,7 @@
 #include "bitops.h"
 #include "ctype.h"
 #include "cpuflags.h"
+#include "io.h"
 
 /* Useful macros */
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
@@ -35,44 +36,10 @@ extern struct boot_params boot_params;
 
 #define cpu_relax()	asm volatile("rep; nop")
 
-/* Basic port I/O */
-static inline void outb(u8 v, u16 port)
-{
-	asm volatile("outb %0,%1" : : "a" (v), "dN" (port));
-}
-static inline u8 inb(u16 port)
-{
-	u8 v;
-	asm volatile("inb %1,%0" : "=a" (v) : "dN" (port));
-	return v;
-}
-
-static inline void outw(u16 v, u16 port)
-{
-	asm volatile("outw %0,%1" : : "a" (v), "dN" (port));
-}
-static inline u16 inw(u16 port)
-{
-	u16 v;
-	asm volatile("inw %1,%0" : "=a" (v) : "dN" (port));
-	return v;
-}
-
-static inline void outl(u32 v, u16 port)
-{
-	asm volatile("outl %0,%1" : : "a" (v), "dN" (port));
-}
-static inline u32 inl(u16 port)
-{
-	u32 v;
-	asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
-	return v;
-}
-
 static inline void io_delay(void)
 {
 	const u16 DELAY_PORT = 0x80;
-	asm volatile("outb %%al,%0" : : "dN" (DELAY_PORT));
+	outb(0, DELAY_PORT);
 }
 
 /* These functions are used to reference data in other segments. */

arch/x86/boot/compressed/Makefile

@@ -101,6 +101,7 @@ ifdef CONFIG_X86_64
 endif
 
 vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o
+vmlinux-objs-$(CONFIG_INTEL_TDX_GUEST) += $(obj)/tdx.o $(obj)/tdcall.o
 
 vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
 vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o

arch/x86/boot/compressed/head_64.S

@@ -289,7 +289,7 @@ SYM_FUNC_START(startup_32)
 	pushl	%eax
 
 	/* Enter paged protected Mode, activating Long Mode */
-	movl	$(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */
+	movl	$CR0_STATE, %eax
 	movl	%eax, %cr0
 
 	/* Jump from 32bit compatibility mode into 64bit mode. */
@@ -649,12 +649,28 @@ SYM_CODE_START(trampoline_32bit_src)
 	movl	$MSR_EFER, %ecx
 	rdmsr
 	btsl	$_EFER_LME, %eax
+	/* Avoid writing EFER if no change was made (for TDX guest) */
+	jc	1f
 	wrmsr
-	popl	%edx
+1:	popl	%edx
 	popl	%ecx
 
+#ifdef CONFIG_X86_MCE
+	/*
+	 * Preserve CR4.MCE if the kernel will enable #MC support.
+	 * Clearing MCE may fault in some environments (that also force #MC
+	 * support). Any machine check that occurs before #MC support is fully
+	 * configured will crash the system regardless of the CR4.MCE value set
+	 * here.
+	 */
+	movl	%cr4, %eax
+	andl	$X86_CR4_MCE, %eax
+#else
+	movl	$0, %eax
+#endif
+
 	/* Enable PAE and LA57 (if required) paging modes */
-	movl	$X86_CR4_PAE, %eax
+	orl	$X86_CR4_PAE, %eax
 	testl	%edx, %edx
 	jz	1f
 	orl	$X86_CR4_LA57, %eax
@@ -668,8 +684,9 @@ SYM_CODE_START(trampoline_32bit_src)
 	pushl	$__KERNEL_CS
 	pushl	%eax
 
-	/* Enable paging again */
-	movl	$(X86_CR0_PG | X86_CR0_PE), %eax
+	/* Enable paging again. */
+	movl	%cr0, %eax
+	btsl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 
 	lret

arch/x86/boot/compressed/misc.c

@@ -48,6 +48,8 @@ void *memmove(void *dest, const void *src, size_t n);
  */
 struct boot_params *boot_params;
 
+struct port_io_ops pio_ops;
+
 memptr free_mem_ptr;
 memptr free_mem_end_ptr;
 
@@ -374,6 +376,16 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 	lines = boot_params->screen_info.orig_video_lines;
 	cols = boot_params->screen_info.orig_video_cols;
 
+	init_default_io_ops();
+
+	/*
+	 * Detect TDX guest environment.
+	 *
+	 * It has to be done before console_init() in order to use
+	 * paravirtualized port I/O operations if needed.
+	 */
+	early_tdx_detect();
+
 	console_init();
 
 	/*

arch/x86/boot/compressed/misc.h

@@ -22,17 +22,19 @@
 #include <linux/linkage.h>
 #include <linux/screen_info.h>
 #include <linux/elf.h>
-#include <linux/io.h>
 #include <asm/page.h>
 #include <asm/boot.h>
 #include <asm/bootparam.h>
 #include <asm/desc_defs.h>
 
+#include "tdx.h"
+
 #define BOOT_CTYPE_H
 #include <linux/acpi.h>
 
 #define BOOT_BOOT_H
 #include "../ctype.h"
+#include "../io.h"
 
 #include "efi.h"
 

arch/x86/boot/compressed/pgtable.h

@@ -6,7 +6,7 @@
 #define TRAMPOLINE_32BIT_PGTABLE_OFFSET	0
 
 #define TRAMPOLINE_32BIT_CODE_OFFSET	PAGE_SIZE
-#define TRAMPOLINE_32BIT_CODE_SIZE	0x70
+#define TRAMPOLINE_32BIT_CODE_SIZE	0x80
 
 #define TRAMPOLINE_32BIT_STACK_END	TRAMPOLINE_32BIT_SIZE
 

arch/x86/boot/compressed/tdcall.S

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include "../../coco/tdx/tdcall.S"

arch/x86/boot/compressed/tdx.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include "../cpuflags.h"
+#include "../string.h"
+#include "../io.h"
+#include "error.h"
+
+#include <vdso/limits.h>
+#include <uapi/asm/vmx.h>
+
+#include <asm/shared/tdx.h>
+
+/* Called from __tdx_hypercall() for unrecoverable failure */
+void __tdx_hypercall_failed(void)
+{
+	error("TDVMCALL failed. TDX module bug?");
+}
+
+static inline unsigned int tdx_io_in(int size, u16 port)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = EXIT_REASON_IO_INSTRUCTION,
+		.r12 = size,
+		.r13 = 0,
+		.r14 = port,
+	};
+
+	if (__tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT))
+		return UINT_MAX;
+
+	return args.r11;
+}
+
+static inline void tdx_io_out(int size, u16 port, u32 value)
+{
+	struct tdx_hypercall_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = EXIT_REASON_IO_INSTRUCTION,
+		.r12 = size,
+		.r13 = 1,
+		.r14 = port,
+		.r15 = value,
+	};
+
+	__tdx_hypercall(&args, 0);
+}
+
+static inline u8 tdx_inb(u16 port)
+{
+	return tdx_io_in(1, port);
+}
+
+static inline void tdx_outb(u8 value, u16 port)
+{
+	tdx_io_out(1, port, value);
+}
+
+static inline void tdx_outw(u16 value, u16 port)
+{
+	tdx_io_out(2, port, value);
+}
+
+void early_tdx_detect(void)
+{
+	u32 eax, sig[3];
+
+	cpuid_count(TDX_CPUID_LEAF_ID, 0, &eax, &sig[0], &sig[2],  &sig[1]);
+
+	if (memcmp(TDX_IDENT, sig, sizeof(sig)))
+		return;
+
+	/* Use hypercalls instead of I/O instructions */
+	pio_ops.f_inb  = tdx_inb;
+	pio_ops.f_outb = tdx_outb;
+	pio_ops.f_outw = tdx_outw;
+}

arch/x86/boot/compressed/tdx.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef BOOT_COMPRESSED_TDX_H
+#define BOOT_COMPRESSED_TDX_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_INTEL_TDX_GUEST
+void early_tdx_detect(void);
+#else
+static inline void early_tdx_detect(void) { };
+#endif
+
+#endif /* BOOT_COMPRESSED_TDX_H */

arch/x86/boot/cpuflags.c

@@ -71,8 +71,7 @@ int has_eflag(unsigned long mask)
 # define EBX_REG "=b"
 #endif
 
-static inline void cpuid_count(u32 id, u32 count,
-		u32 *a, u32 *b, u32 *c, u32 *d)
+void cpuid_count(u32 id, u32 count, u32 *a, u32 *b, u32 *c, u32 *d)
 {
 	asm volatile(".ifnc %%ebx,%3 ; movl  %%ebx,%3 ; .endif	\n\t"
 		     "cpuid					\n\t"

arch/x86/boot/cpuflags.h

@@ -17,5 +17,6 @@ extern u32 cpu_vendor[3];
 
 int has_eflag(unsigned long mask);
 void get_cpuflags(void);
+void cpuid_count(u32 id, u32 count, u32 *a, u32 *b, u32 *c, u32 *d);
 
 #endif

arch/x86/boot/io.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef BOOT_IO_H
+#define BOOT_IO_H
+
+#include <asm/shared/io.h>
+
+#undef inb
+#undef inw
+#undef inl
+#undef outb
+#undef outw
+#undef outl
+
+struct port_io_ops {
+	u8	(*f_inb)(u16 port);
+	void	(*f_outb)(u8 v, u16 port);
+	void	(*f_outw)(u16 v, u16 port);
+};
+
+extern struct port_io_ops pio_ops;
+
+/*
+ * Use the normal I/O instructions by default.
+ * TDX guests override these to use hypercalls.
+ */
+static inline void init_default_io_ops(void)
+{
+	pio_ops.f_inb  = __inb;
+	pio_ops.f_outb = __outb;
+	pio_ops.f_outw = __outw;
+}
+
+/*
+ * Redirect port I/O operations via pio_ops callbacks.
+ * TDX guests override these callbacks with TDX-specific helpers.
+ */
+#define inb  pio_ops.f_inb
+#define outb pio_ops.f_outb
+#define outw pio_ops.f_outw
+
+#endif

arch/x86/boot/main.c

@@ -17,6 +17,8 @@
 
 struct boot_params boot_params __attribute__((aligned(16)));
 
+struct port_io_ops pio_ops;
+
 char *HEAP = _end;
 char *heap_end = _end;		/* Default end of heap = no heap */
 
@@ -133,6 +135,8 @@ static void init_heap(void)
 
 void main(void)
 {
+	init_default_io_ops();
+
 	/* First, copy the boot header into the "zeropage" */
 	copy_boot_params();
 

arch/x86/coco/Makefile

@@ -4,3 +4,5 @@ KASAN_SANITIZE_core.o	:= n
 CFLAGS_core.o		+= -fno-stack-protector
 
 obj-y += core.o
+
+obj-$(CONFIG_INTEL_TDX_GUEST)	+= tdx/

arch/x86/coco/core.c

@@ -18,7 +18,15 @@ static u64 cc_mask __ro_after_init;
 
 static bool intel_cc_platform_has(enum cc_attr attr)
 {
+	switch (attr) {
+	case CC_ATTR_GUEST_UNROLL_STRING_IO:
+	case CC_ATTR_HOTPLUG_DISABLED:
+	case CC_ATTR_GUEST_MEM_ENCRYPT:
+	case CC_ATTR_MEM_ENCRYPT:
+		return true;
+	default:
 		return false;
+	}
 }
 
 /*
@@ -90,9 +98,18 @@ EXPORT_SYMBOL_GPL(cc_platform_has);
 
 u64 cc_mkenc(u64 val)
 {
+	/*
+	 * Both AMD and Intel use a bit in the page table to indicate
+	 * encryption status of the page.
+	 *
+	 * - for AMD, bit *set* means the page is encrypted
+	 * - for Intel *clear* means encrypted.
+	 */
 	switch (vendor) {
 	case CC_VENDOR_AMD:
 		return val | cc_mask;
+	case CC_VENDOR_INTEL:
+		return val & ~cc_mask;
 	default:
 		return val;
 	}
@@ -100,9 +117,12 @@ u64 cc_mkenc(u64 val)
 
 u64 cc_mkdec(u64 val)
 {
+	/* See comment in cc_mkenc() */
 	switch (vendor) {
 	case CC_VENDOR_AMD:
 		return val & ~cc_mask;
+	case CC_VENDOR_INTEL:
+		return val | cc_mask;
 	default:
 		return val;
 	}

arch/x86/coco/tdx/Makefile

+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += tdx.o tdcall.o

arch/x86/coco/tdx/tdcall.S

+/* SPDX-License-Identifier: GPL-2.0 */
+#include <asm/asm-offsets.h>
+#include <asm/asm.h>
+#include <asm/frame.h>
+#include <asm/unwind_hints.h>
+
+#include <linux/linkage.h>
+#include <linux/bits.h>
+#include <linux/errno.h>
+
+#include "../../virt/vmx/tdx/tdxcall.S"
+
+/*
+ * Bitmasks of exposed registers (with VMM).
+ */
+#define TDX_R10		BIT(10)
+#define TDX_R11		BIT(11)
+#define TDX_R12		BIT(12)
+#define TDX_R13		BIT(13)
+#define TDX_R14		BIT(14)
+#define TDX_R15		BIT(15)
+
+/*
+ * These registers are clobbered to hold arguments for each
+ * TDVMCALL. They are safe to expose to the VMM.
+ * Each bit in this mask represents a register ID. Bit field
+ * details can be found in TDX GHCI specification, section
+ * titled "TDCALL [TDG.VP.VMCALL] leaf".
+ */
+#define TDVMCALL_EXPOSE_REGS_MASK	( TDX_R10 | TDX_R11 | \
+					  TDX_R12 | TDX_R13 | \
+					  TDX_R14 | TDX_R15 )
+
+/*
+ * __tdx_module_call()  - Used by TDX guests to request services from
+ * the TDX module (does not include VMM services) using TDCALL instruction.
+ *
+ * Transforms function call register arguments into the TDCALL register ABI.
+ * After TDCALL operation, TDX module output is saved in @out (if it is
+ * provided by the user).
+ *
+ *-------------------------------------------------------------------------
+ * TDCALL ABI:
+ *-------------------------------------------------------------------------
+ * Input Registers:
+ *
+ * RAX                 - TDCALL Leaf number.
+ * RCX,RDX,R8-R9       - TDCALL Leaf specific input registers.
+ *
+ * Output Registers:
+ *
+ * RAX                 - TDCALL instruction error code.
+ * RCX,RDX,R8-R11      - TDCALL Leaf specific output registers.
+ *
+ *-------------------------------------------------------------------------
+ *
+ * __tdx_module_call() function ABI:
+ *
+ * @fn  (RDI)          - TDCALL Leaf ID,    moved to RAX
+ * @rcx (RSI)          - Input parameter 1, moved to RCX
+ * @rdx (RDX)          - Input parameter 2, moved to RDX
+ * @r8  (RCX)          - Input parameter 3, moved to R8
+ * @r9  (R8)           - Input parameter 4, moved to R9
+ *
+ * @out (R9)           - struct tdx_module_output pointer
+ *                       stored temporarily in R12 (not
+ *                       shared with the TDX module). It
+ *                       can be NULL.
+ *
+ * Return status of TDCALL via RAX.
+ */
+SYM_FUNC_START(__tdx_module_call)
+	FRAME_BEGIN
+	TDX_MODULE_CALL host=0
+	FRAME_END
+	RET
+SYM_FUNC_END(__tdx_module_call)
+
+/*
+ * __tdx_hypercall() - Make hypercalls to a TDX VMM using TDVMCALL leaf
+ * of TDCALL instruction
+ *
+ * Transforms values in  function call argument struct tdx_hypercall_args @args
+ * into the TDCALL register ABI. After TDCALL operation, VMM output is saved
+ * back in @args.
+ *
+ *-------------------------------------------------------------------------
+ * TD VMCALL ABI:
+ *-------------------------------------------------------------------------
+ *
+ * Input Registers:
+ *
+ * RAX                 - TDCALL instruction leaf number (0 - TDG.VP.VMCALL)
+ * RCX                 - BITMAP which controls which part of TD Guest GPR
+ *                       is passed as-is to the VMM and back.
+ * R10                 - Set 0 to indicate TDCALL follows standard TDX ABI
+ *                       specification. Non zero value indicates vendor
+ *                       specific ABI.
+ * R11                 - VMCALL sub function number
+ * RBX, RBP, RDI, RSI  - Used to pass VMCALL sub function specific arguments.
+ * R8-R9, R12-R15      - Same as above.
+ *
+ * Output Registers:
+ *
+ * RAX                 - TDCALL instruction status (Not related to hypercall
+ *                        output).
+ * R10                 - Hypercall output error code.
+ * R11-R15             - Hypercall sub function specific output values.
+ *
+ *-------------------------------------------------------------------------
+ *
+ * __tdx_hypercall() function ABI:
+ *
+ * @args  (RDI)        - struct tdx_hypercall_args for input and output
+ * @flags (RSI)        - TDX_HCALL_* flags
+ *
+ * On successful completion, return the hypercall error code.
+ */
+SYM_FUNC_START(__tdx_hypercall)
+	FRAME_BEGIN
+
+	/* Save callee-saved GPRs as mandated by the x86_64 ABI */
+	push %r15
+	push %r14
+	push %r13
+	push %r12
+
+	/* Mangle function call ABI into TDCALL ABI: */
+	/* Set TDCALL leaf ID (TDVMCALL (0)) in RAX */
+	xor %eax, %eax
+
+	/* Copy hypercall registers from arg struct: */
+	movq TDX_HYPERCALL_r10(%rdi), %r10
+	movq TDX_HYPERCALL_r11(%rdi), %r11
+	movq TDX_HYPERCALL_r12(%rdi), %r12
+	movq TDX_HYPERCALL_r13(%rdi), %r13
+	movq TDX_HYPERCALL_r14(%rdi), %r14
+	movq TDX_HYPERCALL_r15(%rdi), %r15
+
+	movl $TDVMCALL_EXPOSE_REGS_MASK, %ecx
+
+	/*
+	 * For the idle loop STI needs to be called directly before the TDCALL
+	 * that enters idle (EXIT_REASON_HLT case). STI instruction enables
+	 * interrupts only one instruction later. If there is a window between
+	 * STI and the instruction that emulates the HALT state, there is a
+	 * chance for interrupts to happen in this window, which can delay the
+	 * HLT operation indefinitely. Since this is the not the desired
+	 * result, conditionally call STI before TDCALL.
+	 */
+	testq $TDX_HCALL_ISSUE_STI, %rsi
+	jz .Lskip_sti
+	sti
+.Lskip_sti:
+	tdcall
+
+	/*
+	 * RAX==0 indicates a failure of the TDVMCALL mechanism itself and that
+	 * something has gone horribly wrong with the TDX module.
+	 *
+	 * The return status of the hypercall operation is in a separate
+	 * register (in R10). Hypercall errors are a part of normal operation
+	 * and are handled by callers.
+	 */
+	testq %rax, %rax
+	jne .Lpanic
+
+	/* TDVMCALL leaf return code is in R10 */
+	movq %r10, %rax
+
+	/* Copy hypercall result registers to arg struct if needed */
+	testq $TDX_HCALL_HAS_OUTPUT, %rsi
+	jz .Lout
+
+	movq %r10, TDX_HYPERCALL_r10(%rdi)
+	movq %r11, TDX_HYPERCALL_r11(%rdi)
+	movq %r12, TDX_HYPERCALL_r12(%rdi)
+	movq %r13, TDX_HYPERCALL_r13(%rdi)
+	movq %r14, TDX_HYPERCALL_r14(%rdi)
+	movq %r15, TDX_HYPERCALL_r15(%rdi)
+.Lout:
+	/*
+	 * Zero out registers exposed to the VMM to avoid speculative execution
+	 * with VMM-controlled values. This needs to include all registers
+	 * present in TDVMCALL_EXPOSE_REGS_MASK (except R12-R15). R12-R15
+	 * context will be restored.
+	 */
+	xor %r10d, %r10d
+	xor %r11d, %r11d
+
+	/* Restore callee-saved GPRs as mandated by the x86_64 ABI */
+	pop %r12
+	pop %r13
+	pop %r14
+	pop %r15
+
+	FRAME_END
+
+	RET
+.Lpanic:
+	call __tdx_hypercall_failed
+	/* __tdx_hypercall_failed never returns */
+	REACHABLE
+	jmp .Lpanic
+SYM_FUNC_END(__tdx_hypercall)

arch/x86/include/asm/acenv.h

@@ -13,7 +13,19 @@
 
 /* Asm macros */
 
-#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+/*
+ * ACPI_FLUSH_CPU_CACHE() flushes caches on entering sleep states.
+ * It is required to prevent data loss.
+ *
+ * While running inside virtual machine, the kernel can bypass cache flushing.
+ * Changing sleep state in a virtual machine doesn't affect the host system
+ * sleep state and cannot lead to data loss.
+ */
+#define ACPI_FLUSH_CPU_CACHE()					\
+do {								\
+	if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))	\
+		wbinvd();					\
+} while (0)
 
 int __acpi_acquire_global_lock(unsigned int *lock);
 int __acpi_release_global_lock(unsigned int *lock);

arch/x86/include/asm/apic.h

@@ -328,6 +328,8 @@ struct apic {
 
 	/* wakeup_secondary_cpu */
 	int	(*wakeup_secondary_cpu)(int apicid, unsigned long start_eip);
+	/* wakeup secondary CPU using 64-bit wakeup point */
+	int	(*wakeup_secondary_cpu_64)(int apicid, unsigned long start_eip);
 
 	void	(*inquire_remote_apic)(int apicid);
 
@@ -488,6 +490,11 @@ static inline unsigned int read_apic_id(void)
 	return apic->get_apic_id(reg);
 }
 
+#ifdef CONFIG_X86_64
+typedef int (*wakeup_cpu_handler)(int apicid, unsigned long start_eip);
+extern void acpi_wake_cpu_handler_update(wakeup_cpu_handler handler);
+#endif
+
 extern int default_apic_id_valid(u32 apicid);
 extern int default_acpi_madt_oem_check(char *, char *);
 extern void default_setup_apic_routing(void);

arch/x86/include/asm/cpufeatures.h

@@ -238,6 +238,7 @@
 #define X86_FEATURE_VMW_VMMCALL		( 8*32+19) /* "" VMware prefers VMMCALL hypercall instruction */
 #define X86_FEATURE_PVUNLOCK		( 8*32+20) /* "" PV unlock function */
 #define X86_FEATURE_VCPUPREEMPT		( 8*32+21) /* "" PV vcpu_is_preempted function */
+#define X86_FEATURE_TDX_GUEST		( 8*32+22) /* Intel Trust Domain Extensions Guest */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (EBX), word 9 */
 #define X86_FEATURE_FSGSBASE		( 9*32+ 0) /* RDFSBASE, WRFSBASE, RDGSBASE, WRGSBASE instructions*/

arch/x86/include/asm/disabled-features.h

@@ -68,6 +68,12 @@
 # define DISABLE_SGX	(1 << (X86_FEATURE_SGX & 31))
 #endif
 
+#ifdef CONFIG_INTEL_TDX_GUEST
+# define DISABLE_TDX_GUEST	0
+#else
+# define DISABLE_TDX_GUEST	(1 << (X86_FEATURE_TDX_GUEST & 31))
+#endif
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -79,7 +85,7 @@
 #define DISABLED_MASK5	0
 #define DISABLED_MASK6	0
 #define DISABLED_MASK7	(DISABLE_PTI)
-#define DISABLED_MASK8	0
+#define DISABLED_MASK8	(DISABLE_TDX_GUEST)
 #define DISABLED_MASK9	(DISABLE_SMAP|DISABLE_SGX)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	0

arch/x86/include/asm/idtentry.h

@@ -632,6 +632,10 @@ DECLARE_IDTENTRY_XENCB(X86_TRAP_OTHER,	exc_xen_hypervisor_callback);
 DECLARE_IDTENTRY_RAW(X86_TRAP_OTHER,	exc_xen_unknown_trap);
 #endif
 
+#ifdef CONFIG_INTEL_TDX_GUEST
+DECLARE_IDTENTRY(X86_TRAP_VE,		exc_virtualization_exception);
+#endif
+
 /* Device interrupts common/spurious */
 DECLARE_IDTENTRY_IRQ(X86_TRAP_OTHER,	common_interrupt);
 #ifdef CONFIG_X86_LOCAL_APIC

arch/x86/include/asm/io.h

@@ -44,6 +44,7 @@
 #include <asm/page.h>
 #include <asm/early_ioremap.h>
 #include <asm/pgtable_types.h>
+#include <asm/shared/io.h>
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
@@ -256,37 +257,23 @@ static inline void slow_down_io(void)
 #endif
 
 #define BUILDIO(bwl, bw, type)						\
-static inline void out##bwl(unsigned type value, int port)		\
-{									\
-	asm volatile("out" #bwl " %" #bw "0, %w1"			\
-		     : : "a"(value), "Nd"(port));			\
-}									\
-									\
-static inline unsigned type in##bwl(int port)				\
-{									\
-	unsigned type value;						\
-	asm volatile("in" #bwl " %w1, %" #bw "0"			\
-		     : "=a"(value) : "Nd"(port));			\
-	return value;							\
-}									\
-									\
-static inline void out##bwl##_p(unsigned type value, int port)		\
+static inline void out##bwl##_p(type value, u16 port)			\
 {									\
 	out##bwl(value, port);						\
 	slow_down_io();							\
 }									\
 									\
-static inline unsigned type in##bwl##_p(int port)			\
+static inline type in##bwl##_p(u16 port)				\
 {									\
-	unsigned type value = in##bwl(port);				\
+	type value = in##bwl(port);					\
 	slow_down_io();							\
 	return value;							\
 }									\
 									\
-static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+static inline void outs##bwl(u16 port, const void *addr, unsigned long count) \
 {									\
 	if (cc_platform_has(CC_ATTR_GUEST_UNROLL_STRING_IO)) {		\
-		unsigned type *value = (unsigned type *)addr;		\
+		type *value = (type *)addr;				\
 		while (count) {						\
 			out##bwl(*value, port);				\
 			value++;					\
@@ -299,10 +286,10 @@ static inline void outs##bwl(int port, const void *addr, unsigned long count) \
 	}								\
 }									\
 									\
-static inline void ins##bwl(int port, void *addr, unsigned long count)	\
+static inline void ins##bwl(u16 port, void *addr, unsigned long count)	\
 {									\
 	if (cc_platform_has(CC_ATTR_GUEST_UNROLL_STRING_IO)) {		\
-		unsigned type *value = (unsigned type *)addr;		\
+		type *value = (type *)addr;				\
 		while (count) {						\
 			*value = in##bwl(port);				\
 			value++;					\
@@ -315,13 +302,11 @@ static inline void ins##bwl(int port, void *addr, unsigned long count)	\
 	}								\
 }
 
-BUILDIO(b, b, char)
-BUILDIO(w, w, short)
-BUILDIO(l, , int)
+BUILDIO(b, b, u8)
+BUILDIO(w, w, u16)
+BUILDIO(l,  , u32)
+#undef BUILDIO
 
-#define inb inb
-#define inw inw
-#define inl inl
 #define inb_p inb_p
 #define inw_p inw_p
 #define inl_p inl_p
@@ -329,9 +314,6 @@ BUILDIO(l, , int)
 #define insw insw
 #define insl insl
 
-#define outb outb
-#define outw outw
-#define outl outl
 #define outb_p outb_p
 #define outw_p outw_p
 #define outl_p outl_p

arch/x86/include/asm/kvm_para.h

@@ -7,6 +7,8 @@
 #include <linux/interrupt.h>
 #include <uapi/asm/kvm_para.h>
 
+#include <asm/tdx.h>
+
 #ifdef CONFIG_KVM_GUEST
 bool kvm_check_and_clear_guest_paused(void);
 #else
@@ -32,6 +34,10 @@ static inline bool kvm_check_and_clear_guest_paused(void)
 static inline long kvm_hypercall0(unsigned int nr)
 {
 	long ret;
+
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return tdx_kvm_hypercall(nr, 0, 0, 0, 0);
+
 	asm volatile(KVM_HYPERCALL
 		     : "=a"(ret)
 		     : "a"(nr)
@@ -42,6 +48,10 @@ static inline long kvm_hypercall0(unsigned int nr)
 static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)
 {
 	long ret;
+
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return tdx_kvm_hypercall(nr, p1, 0, 0, 0);
+
 	asm volatile(KVM_HYPERCALL
 		     : "=a"(ret)
 		     : "a"(nr), "b"(p1)
@@ -53,6 +63,10 @@ static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
 				  unsigned long p2)
 {
 	long ret;
+
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return tdx_kvm_hypercall(nr, p1, p2, 0, 0);
+
 	asm volatile(KVM_HYPERCALL
 		     : "=a"(ret)
 		     : "a"(nr), "b"(p1), "c"(p2)
@@ -64,6 +78,10 @@ static inline long kvm_hypercall3(unsigned int nr, unsigned long p1,
 				  unsigned long p2, unsigned long p3)
 {
 	long ret;
+
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return tdx_kvm_hypercall(nr, p1, p2, p3, 0);
+
 	asm volatile(KVM_HYPERCALL
 		     : "=a"(ret)
 		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
@@ -76,6 +94,10 @@ static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
 				  unsigned long p4)
 {
 	long ret;
+
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return tdx_kvm_hypercall(nr, p1, p2, p3, p4);
+
 	asm volatile(KVM_HYPERCALL
 		     : "=a"(ret)
 		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)

arch/x86/include/asm/mem_encrypt.h

@@ -49,9 +49,6 @@ void __init early_set_mem_enc_dec_hypercall(unsigned long vaddr, int npages,
 
 void __init mem_encrypt_free_decrypted_mem(void);
 
-/* Architecture __weak replacement functions */
-void __init mem_encrypt_init(void);
-
 void __init sev_es_init_vc_handling(void);
 
 #define __bss_decrypted __section(".bss..decrypted")
@@ -89,6 +86,9 @@ static inline void mem_encrypt_free_decrypted_mem(void) { }
 
 #endif	/* CONFIG_AMD_MEM_ENCRYPT */
 
+/* Architecture __weak replacement functions */
+void __init mem_encrypt_init(void);
+
 /*
  * The __sme_pa() and __sme_pa_nodebug() macros are meant for use when
  * writing to or comparing values from the cr3 register.  Having the

arch/x86/include/asm/realmode.h

@@ -25,6 +25,7 @@ struct real_mode_header {
 	u32	sev_es_trampoline_start;
 #endif
 #ifdef CONFIG_X86_64
+	u32	trampoline_start64;
 	u32	trampoline_pgd;
 #endif
 	/* ACPI S3 wakeup */

arch/x86/include/asm/shared/io.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_SHARED_IO_H
+#define _ASM_X86_SHARED_IO_H
+
+#include <linux/types.h>
+
+#define BUILDIO(bwl, bw, type)						\
+static inline void __out##bwl(type value, u16 port)			\
+{									\
+	asm volatile("out" #bwl " %" #bw "0, %w1"			\
+		     : : "a"(value), "Nd"(port));			\
+}									\
+									\
+static inline type __in##bwl(u16 port)					\
+{									\
+	type value;							\
+	asm volatile("in" #bwl " %w1, %" #bw "0"			\
+		     : "=a"(value) : "Nd"(port));			\
+	return value;							\
+}
+
+BUILDIO(b, b, u8)
+BUILDIO(w, w, u16)
+BUILDIO(l,  , u32)
+#undef BUILDIO
+
+#define inb __inb
+#define inw __inw
+#define inl __inl
+#define outb __outb
+#define outw __outw
+#define outl __outl
+
+#endif

arch/x86/include/asm/shared/tdx.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_SHARED_TDX_H
+#define _ASM_X86_SHARED_TDX_H
+
+#include <linux/bits.h>
+#include <linux/types.h>
+
+#define TDX_HYPERCALL_STANDARD  0
+
+#define TDX_HCALL_HAS_OUTPUT	BIT(0)
+#define TDX_HCALL_ISSUE_STI	BIT(1)
+
+#define TDX_CPUID_LEAF_ID	0x21
+#define TDX_IDENT		"IntelTDX    "
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Used in __tdx_hypercall() to pass down and get back registers' values of
+ * the TDCALL instruction when requesting services from the VMM.
+ *
+ * This is a software only structure and not part of the TDX module/VMM ABI.
+ */
+struct tdx_hypercall_args {
+	u64 r10;
+	u64 r11;
+	u64 r12;
+	u64 r13;
+	u64 r14;
+	u64 r15;
+};
+
+/* Used to request services from the VMM */
+u64 __tdx_hypercall(struct tdx_hypercall_args *args, unsigned long flags);
+
+/* Called from __tdx_hypercall() for unrecoverable failure */
+void __tdx_hypercall_failed(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_SHARED_TDX_H */

arch/x86/include/asm/tdx.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2021-2022 Intel Corporation */
+#ifndef _ASM_X86_TDX_H
+#define _ASM_X86_TDX_H
+
+#include <linux/init.h>
+#include <linux/bits.h>
+#include <asm/ptrace.h>
+#include <asm/shared/tdx.h>
+
+/*
+ * SW-defined error codes.
+ *
+ * Bits 47:40 == 0xFF indicate Reserved status code class that never used by
+ * TDX module.
+ */
+#define TDX_ERROR			_BITUL(63)
+#define TDX_SW_ERROR			(TDX_ERROR | GENMASK_ULL(47, 40))
+#define TDX_SEAMCALL_VMFAILINVALID	(TDX_SW_ERROR | _UL(0xFFFF0000))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Used to gather the output registers values of the TDCALL and SEAMCALL
+ * instructions when requesting services from the TDX module.
+ *
+ * This is a software only structure and not part of the TDX module/VMM ABI.
+ */
+struct tdx_module_output {
+	u64 rcx;
+	u64 rdx;
+	u64 r8;
+	u64 r9;
+	u64 r10;
+	u64 r11;
+};
+
+/*
+ * Used by the #VE exception handler to gather the #VE exception
+ * info from the TDX module. This is a software only structure
+ * and not part of the TDX module/VMM ABI.
+ */
+struct ve_info {
+	u64 exit_reason;
+	u64 exit_qual;
+	/* Guest Linear (virtual) Address */
+	u64 gla;
+	/* Guest Physical Address */
+	u64 gpa;
+	u32 instr_len;
+	u32 instr_info;
+};
+
+#ifdef CONFIG_INTEL_TDX_GUEST
+
+void __init tdx_early_init(void);
+
+/* Used to communicate with the TDX module */
+u64 __tdx_module_call(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+		      struct tdx_module_output *out);
+
+void tdx_get_ve_info(struct ve_info *ve);
+
+bool tdx_handle_virt_exception(struct pt_regs *regs, struct ve_info *ve);
+
+void tdx_safe_halt(void);
+
+bool tdx_early_handle_ve(struct pt_regs *regs);
+
+#else
+
+static inline void tdx_early_init(void) { };
+static inline void tdx_safe_halt(void) { };
+
+static inline bool tdx_early_handle_ve(struct pt_regs *regs) { return false; }
+
+#endif /* CONFIG_INTEL_TDX_GUEST */
+
+#if defined(CONFIG_KVM_GUEST) && defined(CONFIG_INTEL_TDX_GUEST)
+long tdx_kvm_hypercall(unsigned int nr, unsigned long p1, unsigned long p2,
+		       unsigned long p3, unsigned long p4);
+#else
+static inline long tdx_kvm_hypercall(unsigned int nr, unsigned long p1,
+				     unsigned long p2, unsigned long p3,
+				     unsigned long p4)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_INTEL_TDX_GUEST && CONFIG_KVM_GUEST */
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_TDX_H */

arch/x86/kernel/acpi/boot.c

@@ -65,6 +65,13 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 static bool acpi_support_online_capable;
 #endif
 
+#ifdef CONFIG_X86_64
+/* Physical address of the Multiprocessor Wakeup Structure mailbox */
+static u64 acpi_mp_wake_mailbox_paddr;
+/* Virtual address of the Multiprocessor Wakeup Structure mailbox */
+static struct acpi_madt_multiproc_wakeup_mailbox *acpi_mp_wake_mailbox;
+#endif
+
 #ifdef CONFIG_X86_IO_APIC
 /*
  * Locks related to IOAPIC hotplug
@@ -336,7 +343,60 @@ acpi_parse_lapic_nmi(union acpi_subtable_headers * header, const unsigned long e
 	return 0;
 }
 
-#endif				/*CONFIG_X86_LOCAL_APIC */
+#ifdef CONFIG_X86_64
+static int acpi_wakeup_cpu(int apicid, unsigned long start_ip)
+{
+	/*
+	 * Remap mailbox memory only for the first call to acpi_wakeup_cpu().
+	 *
+	 * Wakeup of secondary CPUs is fully serialized in the core code.
+	 * No need to protect acpi_mp_wake_mailbox from concurrent accesses.
+	 */
+	if (!acpi_mp_wake_mailbox) {
+		acpi_mp_wake_mailbox = memremap(acpi_mp_wake_mailbox_paddr,
+						sizeof(*acpi_mp_wake_mailbox),
+						MEMREMAP_WB);
+	}
+
+	/*
+	 * Mailbox memory is shared between the firmware and OS. Firmware will
+	 * listen on mailbox command address, and once it receives the wakeup
+	 * command, the CPU associated with the given apicid will be booted.
+	 *
+	 * The value of 'apic_id' and 'wakeup_vector' must be visible to the
+	 * firmware before the wakeup command is visible.  smp_store_release()
+	 * ensures ordering and visibility.
+	 */
+	acpi_mp_wake_mailbox->apic_id	    = apicid;
+	acpi_mp_wake_mailbox->wakeup_vector = start_ip;
+	smp_store_release(&acpi_mp_wake_mailbox->command,
+			  ACPI_MP_WAKE_COMMAND_WAKEUP);
+
+	/*
+	 * Wait for the CPU to wake up.
+	 *
+	 * The CPU being woken up is essentially in a spin loop waiting to be
+	 * woken up. It should not take long for it wake up and acknowledge by
+	 * zeroing out ->command.
+	 *
+	 * ACPI specification doesn't provide any guidance on how long kernel
+	 * has to wait for a wake up acknowledgement. It also doesn't provide
+	 * a way to cancel a wake up request if it takes too long.
+	 *
+	 * In TDX environment, the VMM has control over how long it takes to
+	 * wake up secondary. It can postpone scheduling secondary vCPU
+	 * indefinitely. Giving up on wake up request and reporting error opens
+	 * possible attack vector for VMM: it can wake up a secondary CPU when
+	 * kernel doesn't expect it. Wait until positive result of the wake up
+	 * request.
+	 */
+	while (READ_ONCE(acpi_mp_wake_mailbox->command))
+		cpu_relax();
+
+	return 0;
+}
+#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
 #define MP_ISA_BUS		0
@@ -1083,6 +1143,29 @@ static int __init acpi_parse_madt_lapic_entries(void)
 	}
 	return 0;
 }
+
+#ifdef CONFIG_X86_64
+static int __init acpi_parse_mp_wake(union acpi_subtable_headers *header,
+				     const unsigned long end)
+{
+	struct acpi_madt_multiproc_wakeup *mp_wake;
+
+	if (!IS_ENABLED(CONFIG_SMP))
+		return -ENODEV;
+
+	mp_wake = (struct acpi_madt_multiproc_wakeup *)header;
+	if (BAD_MADT_ENTRY(mp_wake, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	acpi_mp_wake_mailbox_paddr = mp_wake->base_address;
+
+	acpi_wake_cpu_handler_update(acpi_wakeup_cpu);
+
+	return 0;
+}
+#endif				/* CONFIG_X86_64 */
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
 #ifdef	CONFIG_X86_IO_APIC
@@ -1278,6 +1361,14 @@ static void __init acpi_process_madt(void)
 
 				smp_found_config = 1;
 			}
+
+#ifdef CONFIG_X86_64
+			/*
+			 * Parse MADT MP Wake entry.
+			 */
+			acpi_table_parse_madt(ACPI_MADT_TYPE_MULTIPROC_WAKEUP,
+					      acpi_parse_mp_wake, 1);
+#endif
 		}
 		if (error == -EINVAL) {
 			/*

arch/x86/kernel/apic/apic.c

@@ -2551,6 +2551,16 @@ u32 x86_msi_msg_get_destid(struct msi_msg *msg, bool extid)
 }
 EXPORT_SYMBOL_GPL(x86_msi_msg_get_destid);
 
+#ifdef CONFIG_X86_64
+void __init acpi_wake_cpu_handler_update(wakeup_cpu_handler handler)
+{
+	struct apic **drv;
+
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++)
+		(*drv)->wakeup_secondary_cpu_64 = handler;
+}
+#endif
+
 /*
  * Override the generic EOI implementation with an optimized version.
  * Only called during early boot when only one CPU is active and with

arch/x86/kernel/apic/io_apic.c

@@ -65,6 +65,7 @@
 #include <asm/irq_remapping.h>
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
+#include <asm/pgtable.h>
 
 #define	for_each_ioapic(idx)		\
 	for ((idx) = 0; (idx) < nr_ioapics; (idx)++)
@@ -2677,6 +2678,19 @@ static struct resource * __init ioapic_setup_resources(void)
 	return res;
 }
 
+static void io_apic_set_fixmap(enum fixed_addresses idx, phys_addr_t phys)
+{
+	pgprot_t flags = FIXMAP_PAGE_NOCACHE;
+
+	/*
+	 * Ensure fixmaps for IOAPIC MMIO respect memory encryption pgprot
+	 * bits, just like normal ioremap():
+	 */
+	flags = pgprot_decrypted(flags);
+
+	__set_fixmap(idx, phys, flags);
+}
+
 void __init io_apic_init_mappings(void)
 {
 	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
@@ -2709,7 +2723,7 @@ void __init io_apic_init_mappings(void)
 				      __func__, PAGE_SIZE, PAGE_SIZE);
 			ioapic_phys = __pa(ioapic_phys);
 		}
-		set_fixmap_nocache(idx, ioapic_phys);
+		io_apic_set_fixmap(idx, ioapic_phys);
 		apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n",
 			__fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK),
 			ioapic_phys);
@@ -2838,7 +2852,7 @@ int mp_register_ioapic(int id, u32 address, u32 gsi_base,
 	ioapics[idx].mp_config.flags = MPC_APIC_USABLE;
 	ioapics[idx].mp_config.apicaddr = address;
 
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	io_apic_set_fixmap(FIX_IO_APIC_BASE_0 + idx, address);
 	if (bad_ioapic_register(idx)) {
 		clear_fixmap(FIX_IO_APIC_BASE_0 + idx);
 		return -ENODEV;

arch/x86/kernel/asm-offsets.c

@@ -18,6 +18,7 @@
 #include <asm/bootparam.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
+#include <asm/tdx.h>
 
 #ifdef CONFIG_XEN
 #include <xen/interface/xen.h>
@@ -65,6 +66,22 @@ static void __used common(void)
 	OFFSET(XEN_vcpu_info_arch_cr2, vcpu_info, arch.cr2);
 #endif
 
+	BLANK();
+	OFFSET(TDX_MODULE_rcx, tdx_module_output, rcx);
+	OFFSET(TDX_MODULE_rdx, tdx_module_output, rdx);
+	OFFSET(TDX_MODULE_r8,  tdx_module_output, r8);
+	OFFSET(TDX_MODULE_r9,  tdx_module_output, r9);
+	OFFSET(TDX_MODULE_r10, tdx_module_output, r10);
+	OFFSET(TDX_MODULE_r11, tdx_module_output, r11);
+
+	BLANK();
+	OFFSET(TDX_HYPERCALL_r10, tdx_hypercall_args, r10);
+	OFFSET(TDX_HYPERCALL_r11, tdx_hypercall_args, r11);
+	OFFSET(TDX_HYPERCALL_r12, tdx_hypercall_args, r12);
+	OFFSET(TDX_HYPERCALL_r13, tdx_hypercall_args, r13);
+	OFFSET(TDX_HYPERCALL_r14, tdx_hypercall_args, r14);
+	OFFSET(TDX_HYPERCALL_r15, tdx_hypercall_args, r15);
+
 	BLANK();
 	OFFSET(BP_scratch, boot_params, scratch);
 	OFFSET(BP_secure_boot, boot_params, secure_boot);

arch/x86/kernel/head64.c

@@ -40,6 +40,7 @@
 #include <asm/extable.h>
 #include <asm/trapnr.h>
 #include <asm/sev.h>
+#include <asm/tdx.h>
 
 /*
  * Manage page tables very early on.
@@ -417,6 +418,9 @@ void __init do_early_exception(struct pt_regs *regs, int trapnr)
 	    trapnr == X86_TRAP_VC && handle_vc_boot_ghcb(regs))
 		return;
 
+	if (trapnr == X86_TRAP_VE && tdx_early_handle_ve(regs))
+		return;
+
 	early_fixup_exception(regs, trapnr);
 }
 
@@ -515,6 +519,9 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 
 	idt_setup_early_handler();
 
+	/* Needed before cc_platform_has() can be used for TDX */
+	tdx_early_init();
+
 	copy_bootdata(__va(real_mode_data));
 
 	/*

arch/x86/kernel/head_64.S

@@ -173,8 +173,22 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	addq	$(init_top_pgt - __START_KERNEL_map), %rax
 1:
 
+#ifdef CONFIG_X86_MCE
+	/*
+	 * Preserve CR4.MCE if the kernel will enable #MC support.
+	 * Clearing MCE may fault in some environments (that also force #MC
+	 * support). Any machine check that occurs before #MC support is fully
+	 * configured will crash the system regardless of the CR4.MCE value set
+	 * here.
+	 */
+	movq	%cr4, %rcx
+	andl	$X86_CR4_MCE, %ecx
+#else
+	movl	$0, %ecx
+#endif
+
 	/* Enable PAE mode, PGE and LA57 */
-	movl	$(X86_CR4_PAE | X86_CR4_PGE), %ecx
+	orl	$(X86_CR4_PAE | X86_CR4_PGE), %ecx
 #ifdef CONFIG_X86_5LEVEL
 	testl	$1, __pgtable_l5_enabled(%rip)
 	jz	1f
@@ -280,13 +294,23 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	/* Setup EFER (Extended Feature Enable Register) */
 	movl	$MSR_EFER, %ecx
 	rdmsr
+	/*
+	 * Preserve current value of EFER for comparison and to skip
+	 * EFER writes if no change was made (for TDX guest)
+	 */
+	movl    %eax, %edx
 	btsl	$_EFER_SCE, %eax	/* Enable System Call */
 	btl	$20,%edi		/* No Execute supported? */
 	jnc     1f
 	btsl	$_EFER_NX, %eax
 	btsq	$_PAGE_BIT_NX,early_pmd_flags(%rip)
-1:	wrmsr				/* Make changes effective */
 
+	/* Avoid writing EFER if no change was made (for TDX guest) */
+1:	cmpl	%edx, %eax
+	je	1f
+	xor	%edx, %edx
+	wrmsr				/* Make changes effective */
+1:
 	/* Setup cr0 */
 	movl	$CR0_STATE, %eax
 	/* Make changes effective */

arch/x86/kernel/idt.c

@@ -69,6 +69,9 @@ static const __initconst struct idt_data early_idts[] = {
 	 */
 	INTG(X86_TRAP_PF,		asm_exc_page_fault),
 #endif
+#ifdef CONFIG_INTEL_TDX_GUEST
+	INTG(X86_TRAP_VE,		asm_exc_virtualization_exception),
+#endif
 };
 
 /*

arch/x86/kernel/process.c

@@ -46,6 +46,7 @@
 #include <asm/proto.h>
 #include <asm/frame.h>
 #include <asm/unwind.h>
+#include <asm/tdx.h>
 
 #include "process.h"
 
@@ -873,6 +874,9 @@ void select_idle_routine(const struct cpuinfo_x86 *c)
 	} else if (prefer_mwait_c1_over_halt(c)) {
 		pr_info("using mwait in idle threads\n");
 		x86_idle = mwait_idle;
+	} else if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {
+		pr_info("using TDX aware idle routine\n");
+		x86_idle = tdx_safe_halt;
 	} else
 		x86_idle = default_idle;
 }

arch/x86/kernel/smpboot.c

@@ -1083,6 +1083,11 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 	unsigned long boot_error = 0;
 	unsigned long timeout;
 
+#ifdef CONFIG_X86_64
+	/* If 64-bit wakeup method exists, use the 64-bit mode trampoline IP */
+	if (apic->wakeup_secondary_cpu_64)
+		start_ip = real_mode_header->trampoline_start64;
+#endif
 	idle->thread.sp = (unsigned long)task_pt_regs(idle);
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
 	initial_code = (unsigned long)start_secondary;
@@ -1124,11 +1129,14 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 
 	/*
 	 * Wake up a CPU in difference cases:
-	 * - Use the method in the APIC driver if it's defined
+	 * - Use a method from the APIC driver if one defined, with wakeup
+	 *   straight to 64-bit mode preferred over wakeup to RM.
 	 * Otherwise,
 	 * - Use an INIT boot APIC message for APs or NMI for BSP.
 	 */
-	if (apic->wakeup_secondary_cpu)
+	if (apic->wakeup_secondary_cpu_64)
+		boot_error = apic->wakeup_secondary_cpu_64(apicid, start_ip);
+	else if (apic->wakeup_secondary_cpu)
 		boot_error = apic->wakeup_secondary_cpu(apicid, start_ip);
 	else
 		boot_error = wakeup_cpu_via_init_nmi(cpu, start_ip, apicid,

arch/x86/kernel/traps.c

@@ -62,6 +62,7 @@
 #include <asm/insn.h>
 #include <asm/insn-eval.h>
 #include <asm/vdso.h>
+#include <asm/tdx.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/x86_init.h>
@@ -686,13 +687,40 @@ static bool try_fixup_enqcmd_gp(void)
 #endif
 }
 
+static bool gp_try_fixup_and_notify(struct pt_regs *regs, int trapnr,
+				    unsigned long error_code, const char *str)
+{
+	if (fixup_exception(regs, trapnr, error_code, 0))
+		return true;
+
+	current->thread.error_code = error_code;
+	current->thread.trap_nr = trapnr;
+
+	/*
+	 * To be potentially processing a kprobe fault and to trust the result
+	 * from kprobe_running(), we have to be non-preemptible.
+	 */
+	if (!preemptible() && kprobe_running() &&
+	    kprobe_fault_handler(regs, trapnr))
+		return true;
+
+	return notify_die(DIE_GPF, str, regs, error_code, trapnr, SIGSEGV) == NOTIFY_STOP;
+}
+
+static void gp_user_force_sig_segv(struct pt_regs *regs, int trapnr,
+				   unsigned long error_code, const char *str)
+{
+	current->thread.error_code = error_code;
+	current->thread.trap_nr = trapnr;
+	show_signal(current, SIGSEGV, "", str, regs, error_code);
+	force_sig(SIGSEGV);
+}
+
 DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 {
 	char desc[sizeof(GPFSTR) + 50 + 2*sizeof(unsigned long) + 1] = GPFSTR;
 	enum kernel_gp_hint hint = GP_NO_HINT;
-	struct task_struct *tsk;
 	unsigned long gp_addr;
-	int ret;
 
 	if (user_mode(regs) && try_fixup_enqcmd_gp())
 		return;
@@ -711,40 +739,18 @@ DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 		return;
 	}
 
-	tsk = current;
-
 	if (user_mode(regs)) {
 		if (fixup_iopl_exception(regs))
 			goto exit;
 
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_nr = X86_TRAP_GP;
-
 		if (fixup_vdso_exception(regs, X86_TRAP_GP, error_code, 0))
 			goto exit;
 
-		show_signal(tsk, SIGSEGV, "", desc, regs, error_code);
-		force_sig(SIGSEGV);
+		gp_user_force_sig_segv(regs, X86_TRAP_GP, error_code, desc);
 		goto exit;
 	}
 
-	if (fixup_exception(regs, X86_TRAP_GP, error_code, 0))
-		goto exit;
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_nr = X86_TRAP_GP;
-
-	/*
-	 * To be potentially processing a kprobe fault and to trust the result
-	 * from kprobe_running(), we have to be non-preemptible.
-	 */
-	if (!preemptible() &&
-	    kprobe_running() &&
-	    kprobe_fault_handler(regs, X86_TRAP_GP))
-		goto exit;
-
-	ret = notify_die(DIE_GPF, desc, regs, error_code, X86_TRAP_GP, SIGSEGV);
-	if (ret == NOTIFY_STOP)
+	if (gp_try_fixup_and_notify(regs, X86_TRAP_GP, error_code, desc))
 		goto exit;
 
 	if (error_code)
@@ -1343,6 +1349,91 @@ DEFINE_IDTENTRY(exc_device_not_available)
 	}
 }
 
+#ifdef CONFIG_INTEL_TDX_GUEST
+
+#define VE_FAULT_STR "VE fault"
+
+static void ve_raise_fault(struct pt_regs *regs, long error_code)
+{
+	if (user_mode(regs)) {
+		gp_user_force_sig_segv(regs, X86_TRAP_VE, error_code, VE_FAULT_STR);
+		return;
+	}
+
+	if (gp_try_fixup_and_notify(regs, X86_TRAP_VE, error_code, VE_FAULT_STR))
+		return;
+
+	die_addr(VE_FAULT_STR, regs, error_code, 0);
+}
+
+/*
+ * Virtualization Exceptions (#VE) are delivered to TDX guests due to
+ * specific guest actions which may happen in either user space or the
+ * kernel:
+ *
+ *  * Specific instructions (WBINVD, for example)
+ *  * Specific MSR accesses
+ *  * Specific CPUID leaf accesses
+ *  * Access to specific guest physical addresses
+ *
+ * In the settings that Linux will run in, virtualization exceptions are
+ * never generated on accesses to normal, TD-private memory that has been
+ * accepted (by BIOS or with tdx_enc_status_changed()).
+ *
+ * Syscall entry code has a critical window where the kernel stack is not
+ * yet set up. Any exception in this window leads to hard to debug issues
+ * and can be exploited for privilege escalation. Exceptions in the NMI
+ * entry code also cause issues. Returning from the exception handler with
+ * IRET will re-enable NMIs and nested NMI will corrupt the NMI stack.
+ *
+ * For these reasons, the kernel avoids #VEs during the syscall gap and
+ * the NMI entry code. Entry code paths do not access TD-shared memory,
+ * MMIO regions, use #VE triggering MSRs, instructions, or CPUID leaves
+ * that might generate #VE. VMM can remove memory from TD at any point,
+ * but access to unaccepted (or missing) private memory leads to VM
+ * termination, not to #VE.
+ *
+ * Similarly to page faults and breakpoints, #VEs are allowed in NMI
+ * handlers once the kernel is ready to deal with nested NMIs.
+ *
+ * During #VE delivery, all interrupts, including NMIs, are blocked until
+ * TDGETVEINFO is called. It prevents #VE nesting until the kernel reads
+ * the VE info.
+ *
+ * If a guest kernel action which would normally cause a #VE occurs in
+ * the interrupt-disabled region before TDGETVEINFO, a #DF (fault
+ * exception) is delivered to the guest which will result in an oops.
+ *
+ * The entry code has been audited carefully for following these expectations.
+ * Changes in the entry code have to be audited for correctness vs. this
+ * aspect. Similarly to #PF, #VE in these places will expose kernel to
+ * privilege escalation or may lead to random crashes.
+ */
+DEFINE_IDTENTRY(exc_virtualization_exception)
+{
+	struct ve_info ve;
+
+	/*
+	 * NMIs/Machine-checks/Interrupts will be in a disabled state
+	 * till TDGETVEINFO TDCALL is executed. This ensures that VE
+	 * info cannot be overwritten by a nested #VE.
+	 */
+	tdx_get_ve_info(&ve);
+
+	cond_local_irq_enable(regs);
+
+	/*
+	 * If tdx_handle_virt_exception() could not process
+	 * it successfully, treat it as #GP(0) and handle it.
+	 */
+	if (!tdx_handle_virt_exception(regs, &ve))
+		ve_raise_fault(regs, 0);
+
+	cond_local_irq_disable(regs);
+}
+
+#endif
+
 #ifdef CONFIG_X86_32
 DEFINE_IDTENTRY_SW(iret_error)
 {

arch/x86/lib/kaslr.c

@@ -11,7 +11,7 @@
 #include <asm/msr.h>
 #include <asm/archrandom.h>
 #include <asm/e820/api.h>
-#include <asm/io.h>
+#include <asm/shared/io.h>
 
 /*
  * When built for the regular kernel, several functions need to be stubbed out

arch/x86/mm/ioremap.c

@@ -242,10 +242,15 @@ __ioremap_caller(resource_size_t phys_addr, unsigned long size,
 	 * If the page being mapped is in memory and SEV is active then
 	 * make sure the memory encryption attribute is enabled in the
 	 * resulting mapping.
+	 * In TDX guests, memory is marked private by default. If encryption
+	 * is not requested (using encrypted), explicitly set decrypt
+	 * attribute in all IOREMAPPED memory.
 	 */
 	prot = PAGE_KERNEL_IO;
 	if ((io_desc.flags & IORES_MAP_ENCRYPTED) || encrypted)
 		prot = pgprot_encrypted(prot);
+	else
+		prot = pgprot_decrypted(prot);
 
 	switch (pcm) {
 	case _PAGE_CACHE_MODE_UC:

arch/x86/mm/mem_encrypt.c

@@ -42,7 +42,14 @@ bool force_dma_unencrypted(struct device *dev)
 
 static void print_mem_encrypt_feature_info(void)
 {
-	pr_info("AMD Memory Encryption Features active:");
+	pr_info("Memory Encryption Features active:");
+
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {
+		pr_cont(" Intel TDX\n");
+		return;
+	}
+
+	pr_cont(" AMD");
 
 	/* Secure Memory Encryption */
 	if (cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT)) {

arch/x86/realmode/rm/header.S

@@ -24,6 +24,7 @@ SYM_DATA_START(real_mode_header)
 	.long	pa_sev_es_trampoline_start
 #endif
 #ifdef CONFIG_X86_64
+	.long	pa_trampoline_start64
 	.long	pa_trampoline_pgd;
 #endif
 	/* ACPI S3 wakeup */

arch/x86/realmode/rm/trampoline_64.S

@@ -70,7 +70,7 @@ SYM_CODE_START(trampoline_start)
 	movw	$__KERNEL_DS, %dx	# Data segment descriptor
 
 	# Enable protected mode
-	movl	$X86_CR0_PE, %eax	# protected mode (PE) bit
+	movl	$(CR0_STATE & ~X86_CR0_PG), %eax
 	movl	%eax, %cr0		# into protected mode
 
 	# flush prefetch and jump to startup_32
@@ -143,13 +143,24 @@ SYM_CODE_START(startup_32)
 	movl	%eax, %cr3
 
 	# Set up EFER
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	/*
+	 * Skip writing to EFER if the register already has desired
+	 * value (to avoid #VE for the TDX guest).
+	 */
+	cmp	pa_tr_efer, %eax
+	jne	.Lwrite_efer
+	cmp	pa_tr_efer + 4, %edx
+	je	.Ldone_efer
+.Lwrite_efer:
 	movl	pa_tr_efer, %eax
 	movl	pa_tr_efer + 4, %edx
-	movl	$MSR_EFER, %ecx
 	wrmsr
 
-	# Enable paging and in turn activate Long Mode
-	movl	$(X86_CR0_PG | X86_CR0_WP | X86_CR0_PE), %eax
+.Ldone_efer:
+	# Enable paging and in turn activate Long Mode.
+	movl	$CR0_STATE, %eax
 	movl	%eax, %cr0
 
 	/*
@@ -161,6 +172,19 @@ SYM_CODE_START(startup_32)
 	ljmpl	$__KERNEL_CS, $pa_startup_64
 SYM_CODE_END(startup_32)
 
+SYM_CODE_START(pa_trampoline_compat)
+	/*
+	 * In compatibility mode.  Prep ESP and DX for startup_32, then disable
+	 * paging and complete the switch to legacy 32-bit mode.
+	 */
+	movl	$rm_stack_end, %esp
+	movw	$__KERNEL_DS, %dx
+
+	movl	$(CR0_STATE & ~X86_CR0_PG), %eax
+	movl	%eax, %cr0
+	ljmpl   $__KERNEL32_CS, $pa_startup_32
+SYM_CODE_END(pa_trampoline_compat)
+
 	.section ".text64","ax"
 	.code64
 	.balign 4
@@ -169,6 +193,20 @@ SYM_CODE_START(startup_64)
 	jmpq	*tr_start(%rip)
 SYM_CODE_END(startup_64)
 
+SYM_CODE_START(trampoline_start64)
+	/*
+	 * APs start here on a direct transfer from 64-bit BIOS with identity
+	 * mapped page tables.  Load the kernel's GDT in order to gear down to
+	 * 32-bit mode (to handle 4-level vs. 5-level paging), and to (re)load
+	 * segment registers.  Load the zero IDT so any fault triggers a
+	 * shutdown instead of jumping back into BIOS.
+	 */
+	lidt	tr_idt(%rip)
+	lgdt	tr_gdt64(%rip)
+
+	ljmpl	*tr_compat(%rip)
+SYM_CODE_END(trampoline_start64)
+
 	.section ".rodata","a"
 	# Duplicate the global descriptor table
 	# so the kernel can live anywhere
@@ -182,6 +220,17 @@ SYM_DATA_START(tr_gdt)
 	.quad	0x00cf93000000ffff	# __KERNEL_DS
 SYM_DATA_END_LABEL(tr_gdt, SYM_L_LOCAL, tr_gdt_end)
 
+SYM_DATA_START(tr_gdt64)
+	.short	tr_gdt_end - tr_gdt - 1	# gdt limit
+	.long	pa_tr_gdt
+	.long	0
+SYM_DATA_END(tr_gdt64)
+
+SYM_DATA_START(tr_compat)
+	.long	pa_trampoline_compat
+	.short	__KERNEL32_CS
+SYM_DATA_END(tr_compat)
+
 	.bss
 	.balign	PAGE_SIZE
 SYM_DATA(trampoline_pgd, .space PAGE_SIZE)

arch/x86/realmode/rm/trampoline_common.S

 /* SPDX-License-Identifier: GPL-2.0 */
 	.section ".rodata","a"
 	.balign	16
-SYM_DATA_LOCAL(tr_idt, .fill 1, 6, 0)
+
+/*
+ * When a bootloader hands off to the kernel in 32-bit mode an
+ * IDT with a 2-byte limit and 4-byte base is needed. When a boot
+ * loader hands off to a kernel 64-bit mode the base address
+ * extends to 8-bytes. Reserve enough space for either scenario.
+ */
+SYM_DATA_START_LOCAL(tr_idt)
+	.short  0
+	.quad   0
+SYM_DATA_END(tr_idt)

arch/x86/realmode/rm/wakemain.c

@@ -62,8 +62,12 @@ static void send_morse(const char *pattern)
 	}
 }
 
+struct port_io_ops pio_ops;
+
 void main(void)
 {
+	init_default_io_ops();
+
 	/* Kill machine if structures are wrong */
 	if (wakeup_header.real_magic != 0x12345678)
 		while (1)

arch/x86/virt/vmx/tdx/tdxcall.S

+/* SPDX-License-Identifier: GPL-2.0 */
+#include <asm/asm-offsets.h>
+#include <asm/tdx.h>
+
+/*
+ * TDCALL and SEAMCALL are supported in Binutils >= 2.36.
+ */
+#define tdcall		.byte 0x66,0x0f,0x01,0xcc
+#define seamcall	.byte 0x66,0x0f,0x01,0xcf
+
+/*
+ * TDX_MODULE_CALL - common helper macro for both
+ *                 TDCALL and SEAMCALL instructions.
+ *
+ * TDCALL   - used by TDX guests to make requests to the
+ *            TDX module and hypercalls to the VMM.
+ * SEAMCALL - used by TDX hosts to make requests to the
+ *            TDX module.
+ */
+.macro TDX_MODULE_CALL host:req
+	/*
+	 * R12 will be used as temporary storage for struct tdx_module_output
+	 * pointer. Since R12-R15 registers are not used by TDCALL/SEAMCALL
+	 * services supported by this function, it can be reused.
+	 */
+
+	/* Callee saved, so preserve it */
+	push %r12
+
+	/*
+	 * Push output pointer to stack.
+	 * After the operation, it will be fetched into R12 register.
+	 */
+	push %r9
+
+	/* Mangle function call ABI into TDCALL/SEAMCALL ABI: */
+	/* Move Leaf ID to RAX */
+	mov %rdi, %rax
+	/* Move input 4 to R9 */
+	mov %r8,  %r9
+	/* Move input 3 to R8 */
+	mov %rcx, %r8
+	/* Move input 1 to RCX */
+	mov %rsi, %rcx
+	/* Leave input param 2 in RDX */
+
+	.if \host
+	seamcall
+	/*
+	 * SEAMCALL instruction is essentially a VMExit from VMX root
+	 * mode to SEAM VMX root mode.  VMfailInvalid (CF=1) indicates
+	 * that the targeted SEAM firmware is not loaded or disabled,
+	 * or P-SEAMLDR is busy with another SEAMCALL.  %rax is not
+	 * changed in this case.
+	 *
+	 * Set %rax to TDX_SEAMCALL_VMFAILINVALID for VMfailInvalid.
+	 * This value will never be used as actual SEAMCALL error code as
+	 * it is from the Reserved status code class.
+	 */
+	jnc .Lno_vmfailinvalid
+	mov $TDX_SEAMCALL_VMFAILINVALID, %rax
+.Lno_vmfailinvalid:
+
+	.else
+	tdcall
+	.endif
+
+	/*
+	 * Fetch output pointer from stack to R12 (It is used
+	 * as temporary storage)
+	 */
+	pop %r12
+
+	/*
+	 * Since this macro can be invoked with NULL as an output pointer,
+	 * check if caller provided an output struct before storing output
+	 * registers.
+	 *
+	 * Update output registers, even if the call failed (RAX != 0).
+	 * Other registers may contain details of the failure.
+	 */
+	test %r12, %r12
+	jz .Lno_output_struct
+
+	/* Copy result registers to output struct: */
+	movq %rcx, TDX_MODULE_rcx(%r12)
+	movq %rdx, TDX_MODULE_rdx(%r12)
+	movq %r8,  TDX_MODULE_r8(%r12)
+	movq %r9,  TDX_MODULE_r9(%r12)
+	movq %r10, TDX_MODULE_r10(%r12)
+	movq %r11, TDX_MODULE_r11(%r12)
+
+.Lno_output_struct:
+	/* Restore the state of R12 register */
+	pop %r12
+.endm

include/linux/cc_platform.h

@@ -80,6 +80,16 @@ enum cc_attr {
 	 * using AMD SEV-SNP features.
 	 */
 	CC_ATTR_GUEST_SEV_SNP,
+
+	/**
+	 * @CC_ATTR_HOTPLUG_DISABLED: Hotplug is not supported or disabled.
+	 *
+	 * The platform/OS is running as a guest/virtual machine does not
+	 * support CPU hotplug feature.
+	 *
+	 * Examples include TDX Guest.
+	 */
+	CC_ATTR_HOTPLUG_DISABLED,
 };
 
 #ifdef CONFIG_ARCH_HAS_CC_PLATFORM

kernel/cpu.c

@@ -35,6 +35,7 @@
 #include <linux/percpu-rwsem.h>
 #include <linux/cpuset.h>
 #include <linux/random.h>
+#include <linux/cc_platform.h>
 
 #include <trace/events/power.h>
 #define CREATE_TRACE_POINTS
@@ -1190,6 +1191,12 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen,
 
 static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target)
 {
+	/*
+	 * If the platform does not support hotplug, report it explicitly to
+	 * differentiate it from a transient offlining failure.
+	 */
+	if (cc_platform_has(CC_ATTR_HOTPLUG_DISABLED))
+		return -EOPNOTSUPP;
 	if (cpu_hotplug_disabled)
 		return -EBUSY;
 	return _cpu_down(cpu, 0, target);