Commit 3ac268d5 authored by Florian Fainelli's avatar Florian Fainelli Committed by Marc Zyngier

irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER

Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.

To avoid using of_irq_count() which is not exported towards module,
switch the driver to use the platform_device provided by the irqchip
platform driver code and resolve the number of interrupts using
platform_irq_count().
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-11-f.fainelli@gmail.com
parent 945486bf
......@@ -123,7 +123,9 @@ config BCM7038_L1_IRQ
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config BCM7120_L2_IRQ
bool
tristate "Broadcom STB 7120-style L2 interrupt controller driver"
depends on ARCH_BRCMSTB || BMIPS_GENERIC
default ARCH_BRCMSTB || BMIPS_GENERIC
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
......
......@@ -220,6 +220,7 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
{
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
struct bcm7120_l2_intc_data *data;
struct platform_device *pdev;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
int ret = 0;
......@@ -230,7 +231,13 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
if (!data)
return -ENOMEM;
data->num_parent_irqs = of_irq_count(dn);
pdev = of_find_device_by_node(dn);
if (!pdev) {
ret = -ENODEV;
goto out_free_data;
}
data->num_parent_irqs = platform_irq_count(pdev);
if (data->num_parent_irqs <= 0) {
pr_err("invalid number of parent interrupts\n");
ret = -ENOMEM;
......@@ -329,6 +336,7 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
if (data->map_base[idx])
iounmap(data->map_base[idx]);
}
out_free_data:
kfree(data);
return ret;
}
......@@ -347,8 +355,9 @@ static int __init bcm7120_l2_intc_probe_3380(struct device_node *dn,
"BCM3380 L2");
}
IRQCHIP_DECLARE(bcm7120_l2_intc, "brcm,bcm7120-l2-intc",
bcm7120_l2_intc_probe_7120);
IRQCHIP_DECLARE(bcm3380_l2_intc, "brcm,bcm3380-l2-intc",
bcm7120_l2_intc_probe_3380);
IRQCHIP_PLATFORM_DRIVER_BEGIN(bcm7120_l2)
IRQCHIP_MATCH("brcm,bcm7120-l2-intc", bcm7120_l2_intc_probe_7120)
IRQCHIP_MATCH("brcm,bcm3380-l2-intc", bcm7120_l2_intc_probe_3380)
IRQCHIP_PLATFORM_DRIVER_END(bcm7120_l2)
MODULE_DESCRIPTION("Broadcom STB 7120-style L2 interrupt controller driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment