Skip to content

L
linux
Commit 3af11cbb authored by Renze Nicolai's avatar Renze Nicolai Committed by Andrew Jeffery
Browse files
Options

ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC 

Restructure GPIO table to fit maximum line length.

Fix mistakes found while working on OpenBMC userland configuration and
based on probing the board.

Schematic for this board is not available. Because of this the choice
was made to use a descriptive method for naming the GPIOs.

 - Push-pull outputs start with output-*
 - Open-drain outputs start with control-*
 - LED outputs start with led-*
 - Inputs start with input-*
 - Button inputs start with button-*
 - Active low signals end with *-n
Signed-off-by: default avatarRenze Nicolai <renze@rnplus.nl>
Signed-off-by: default avatarAndrew Jeffery <andrew@codeconstruct.com.au>
parent e0e5ed99
Hide whitespace changes
Inline Side-by-side
Showing with 37 additions and 58 deletions
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
View file @ 3af11cbb
......@@ -79,64 +79,43 @@ iio-hwmon {
&gpio {
status = "okay";
gpio-line-names =
/*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
/*A4-A7*/ "", "", "", "",
/*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
/*B4-B7*/ "", "", "", "",
/*C0-C3*/ "", "", "", "",
/*C4-C7*/ "", "", "control-locatorbutton", "",
/*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
/*D4-D7*/ "", "", "", "",
/*E0-E3*/ "", "", "", "",
/*E4-E7*/ "", "", "", "",
/*F0-F3*/ "", "", "", "",
/*F4-F7*/ "", "", "", "",
/*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
/*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
/*H0-H3*/ "", "", "", "",
/*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
/*I0-I3*/ "", "", "", "",
/*I4-I7*/ "", "", "", "",
/*J0-J3*/ "output-bmc-ready", "", "", "",
/*J4-J7*/ "", "", "", "",
/*K0-K3*/ "", "", "", "",
/*K4-K7*/ "", "", "", "",
/*L0-L3*/ "", "", "", "",
/*L4-L7*/ "", "", "", "",
/*M0-M3*/ "", "", "", "",
/*M4-M7*/ "", "", "", "",
/*N0-N3*/ "", "", "", "",
/*N4-N7*/ "", "", "", "",
/*O0-O3*/ "", "", "", "",
/*O4-O7*/ "", "", "", "",
/*P0-P3*/ "", "", "", "",
/*P4-P7*/ "", "", "", "",
/*Q0-Q3*/ "", "", "", "",
/*Q4-Q7*/ "", "", "", "",
/*R0-R3*/ "", "", "", "",
/*R4-R7*/ "", "", "", "",
/*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
/*S4-S7*/ "", "", "", "",
/*T0-T3*/ "", "", "", "",
/*T4-T7*/ "", "", "", "",
/*U0-U3*/ "", "", "", "",
/*U4-U7*/ "", "", "", "",
/*V0-V3*/ "", "", "", "",
/*V4-V7*/ "", "", "", "",
/*W0-W3*/ "", "", "", "",
/*W4-W7*/ "", "", "", "",
/*X0-X3*/ "", "", "", "",
/*X4-X7*/ "", "", "", "",
/*Y0-Y3*/ "", "", "", "",
/*Y4-Y7*/ "", "", "", "",
/*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
/*Z4-Z7*/ "", "", "", "",
/*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
/*AA4-AC7*/ "", "", "", "",
/*AB0-AB3*/ "", "", "", "",
/*AB4-AC7*/ "", "", "", "",
/*AC0-AC3*/ "", "", "", "",
/*AC4-AC7*/ "", "", "", "";
/* A */ "input-locatorled-n", "", "", "", "", "", "", "",
/* B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
/* C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
/* D */ "button-power-n", "control-power-n", "button-reset-n",
"control-reset-n", "", "", "", "",
/* E */ "", "", "", "", "", "", "", "",
/* F */ "", "", "", "", "", "", "", "",
/* G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
"input-id2-n", "input-aux-smb-alert-n", "",
"input-psu-smb-alert-n", "",
/* H */ "", "", "", "", "input-mfg-mode-n", "",
"led-heartbeat-n", "input-case-open-n",
/* I */ "", "", "", "", "", "", "", "",
/* J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
/* K */ "", "", "", "", "", "", "", "",
/* L */ "", "", "", "", "", "", "", "",
/* M */ "", "", "", "", "", "", "", "",
/* N */ "", "", "", "", "", "", "", "",
/* O */ "", "", "", "", "", "", "", "",
/* P */ "", "", "", "", "", "", "", "",
/* Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
"input-pcie-wake-n",
/* R */ "", "", "", "", "", "", "", "",
/* S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
/* T */ "", "", "", "", "", "", "", "",
/* U */ "", "", "", "", "", "", "", "",
/* V */ "", "", "", "", "", "", "", "",
/* W */ "", "", "", "", "", "", "", "",
/* X */ "", "", "", "", "", "", "", "",
/* Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
"", "",
/* Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
"", "",
/* AA */ "input-cpu1-thermtrip-latch-n", "",
"input-cpu1-prochot-n", "", "", "", "", "",
/* AB */ "", "input-power-good", "", "", "", "", "", "",
/* AC */ "", "", "", "", "", "", "", "";
};
&fmc {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7