Commit 3b1d4ed5 authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] Don't drag a platform specific header into generic arch code.

For some platforms it's definitions may conflict.  So that's the one-liner.
The rest is 10 square kilometers of collateral damage fixup this include
used to paper over.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 7c8545e9
......@@ -13,9 +13,9 @@
#include <asm/system.h>
#include <asm/hardirq.h>
#include <asm/hazards.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/smp.h>
#include <asm/mips-boards/maltaint.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <asm/time.h>
......@@ -614,7 +614,7 @@ int setup_irq_smtc(unsigned int irq, struct irqaction * new,
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
unsigned int vpe = current_cpu_data.vpe_id;
vpemask[vpe][irq - MIPSCPU_INT_BASE] = 1;
vpemask[vpe][irq - MIPS_CPU_IRQ_BASE] = 1;
#endif
irq_hwmask[irq] = hwmask;
......@@ -822,7 +822,7 @@ void ipi_decode(struct smtc_ipi *pipi)
switch (type_copy) {
case SMTC_CLOCK_TICK:
irq_enter();
kstat_this_cpu.irqs[MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR]++;
kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + cp0_perfcount_irq]++;
/* Invoke Clock "Interrupt" */
ipi_timer_latch[dest_copy] = 0;
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
......
......@@ -199,11 +199,16 @@ int (*perf_irq)(void) = null_perf_irq;
EXPORT_SYMBOL(null_perf_irq);
EXPORT_SYMBOL(perf_irq);
/*
* Timer interrupt
*/
int cp0_compare_irq;
/*
* Performance counter IRQ or -1 if shared with timer
*/
int mipsxx_perfcount_irq;
EXPORT_SYMBOL(mipsxx_perfcount_irq);
int cp0_perfcount_irq;
EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
/*
* Possibly handle a performance counter interrupt.
......@@ -213,12 +218,12 @@ static inline int handle_perf_irq (int r2)
{
/*
* The performance counter overflow interrupt may be shared with the
* timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
* timer interrupt (cp0_perfcount_irq < 0). If it is and a
* performance counter has overflowed (perf_irq() == IRQ_HANDLED)
* and we can't reliably determine if a counter interrupt has also
* happened (!r2) then don't check for a timer interrupt.
*/
return (mipsxx_perfcount_irq < 0) &&
return (cp0_perfcount_irq < 0) &&
perf_irq() == IRQ_HANDLED &&
!r2;
}
......
......@@ -1350,9 +1350,6 @@ void __init per_cpu_trap_init(void)
if (!secondaryTC) {
#endif /* CONFIG_MIPS_MT_SMTC */
/*
* Interrupt handling.
*/
if (cpu_has_veic || cpu_has_vint) {
write_c0_ebase (ebase);
/* Setting vector spacing enables EI/VI mode */
......@@ -1366,6 +1363,23 @@ void __init per_cpu_trap_init(void)
} else
set_c0_cause(CAUSEF_IV);
}
/*
* Before R2 both interrupt numbers were fixed to 7, so on R2 only:
*
* o read IntCtl.IPTI to determine the timer interrupt
* o read IntCtl.IPPCI to determine the performance counter interrupt
*/
if (cpu_has_mips_r2) {
cp0_compare_irq = (read_c0_intctl () >> 29) & 7;
cp0_perfcount_irq = -1;
} else {
cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
cp0_perfcount_irq = (read_c0_intctl () >> 26) & 7;
if (cp0_perfcount_irq != cp0_compare_irq)
cp0_perfcount_irq = -1;
}
#ifdef CONFIG_MIPS_MT_SMTC
}
#endif /* CONFIG_MIPS_MT_SMTC */
......
......@@ -189,7 +189,7 @@ asmlinkage void plat_irq_dispatch(void)
if (irq == MIPSCPU_INT_ATLAS)
atlas_hw0_irqdispatch();
else if (irq >= 0)
do_IRQ(MIPSCPU_INT_BASE + irq);
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
else
spurious_interrupt();
}
......@@ -261,11 +261,11 @@ void __init arch_init_irq(void)
} else if (cpu_has_vint) {
set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS,
setup_irq_smtc (MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS,
&atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
#else /* Not SMTC */
setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
#endif /* CONFIG_MIPS_MT_SMTC */
} else
setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
}
......@@ -54,7 +54,7 @@
unsigned long cpu_khz;
static int mips_cpu_timer_irq;
extern int mipsxx_perfcount_irq;
extern int cp0_perfcount_irq;
extern void smtc_timer_broadcast(int);
static void mips_timer_dispatch(void)
......@@ -64,7 +64,7 @@ static void mips_timer_dispatch(void)
static void mips_perf_dispatch(void)
{
do_IRQ(mipsxx_perfcount_irq);
do_IRQ(cp0_perfcount_irq);
}
/*
......@@ -82,12 +82,12 @@ static inline int handle_perf_irq (int r2)
{
/*
* The performance counter overflow interrupt may be shared with the
* timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
* timer interrupt (cp0_perfcount_irq < 0). If it is and a
* performance counter has overflowed (perf_irq() == IRQ_HANDLED)
* and we can't reliably determine if a counter interrupt has also
* happened (!r2) then don't check for a timer interrupt.
*/
return (mipsxx_perfcount_irq < 0) &&
return (cp0_perfcount_irq < 0) &&
perf_irq() == IRQ_HANDLED &&
!r2;
}
......@@ -259,42 +259,31 @@ static struct irqaction perf_irqaction = {
void __init plat_perf_setup(struct irqaction *irq)
{
int hwint = 0;
mipsxx_perfcount_irq = -1;
cp0_perfcount_irq = -1;
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_PERFCTR, mips_perf_dispatch);
mipsxx_perfcount_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
cp0_perfcount_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
} else
#endif
if (cpu_has_mips_r2) {
/*
* Read IntCtl.IPPCI to determine the performance
* counter interrupt
*/
hwint = (read_c0_intctl () >> 26) & 7;
if (hwint != MIPSCPU_INT_CPUCTR) {
if (cpu_has_vint)
set_vi_handler (hwint, mips_perf_dispatch);
mipsxx_perfcount_irq = MIPSCPU_INT_BASE + hwint;
}
}
if (mipsxx_perfcount_irq >= 0) {
if (cp0_perfcount_irq >= 0) {
if (cpu_has_vint)
set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc(mipsxx_perfcount_irq, irq, 0x100 << hwint);
setup_irq_smtc(cp0_perfcount_irq, irq,
0x100 << cp0_perfcount_irq);
#else
setup_irq(mipsxx_perfcount_irq, irq);
setup_irq(cp0_perfcount_irq, irq);
#endif /* CONFIG_MIPS_MT_SMTC */
#ifdef CONFIG_SMP
set_irq_handler(mipsxx_perfcount_irq, handle_percpu_irq);
set_irq_handler(cp0_perfcount_irq, handle_percpu_irq);
#endif
}
}
void __init plat_timer_setup(struct irqaction *irq)
{
int hwint = 0;
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
......@@ -303,22 +292,15 @@ void __init plat_timer_setup(struct irqaction *irq)
else
#endif
{
if (cpu_has_mips_r2)
/*
* Read IntCtl.IPTI to determine the timer interrupt
*/
hwint = (read_c0_intctl () >> 29) & 7;
else
hwint = MIPSCPU_INT_CPUCTR;
if (cpu_has_vint)
set_vi_handler (hwint, mips_timer_dispatch);
mips_cpu_timer_irq = MIPSCPU_INT_BASE + hwint;
set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
/* we are using the cpu counter for timer interrupts */
irq->handler = mips_timer_interrupt; /* we use our own handler */
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << hwint);
setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << cp0_compare_irq);
#else
setup_irq(mips_cpu_timer_irq, irq);
#endif /* CONFIG_MIPS_MT_SMTC */
......
......@@ -257,7 +257,7 @@ asmlinkage void plat_irq_dispatch(void)
if (irq == MIPSCPU_INT_I8259A)
malta_hw0_irqdispatch();
else if (irq > 0)
do_IRQ(MIPSCPU_INT_BASE + irq);
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
else
spurious_interrupt();
}
......@@ -326,17 +326,17 @@ void __init arch_init_irq(void)
set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq,
setup_irq_smtc (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq,
(0x100 << MIPSCPU_INT_I8259A));
setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI,
setup_irq_smtc (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
#else /* Not SMTC */
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
#endif /* CONFIG_MIPS_MT_SMTC */
}
else {
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
}
}
......@@ -106,7 +106,7 @@ asmlinkage void plat_irq_dispatch(void)
irq = irq_ffs(pending);
if (irq >= 0)
do_IRQ(MIPSCPU_INT_BASE + irq);
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
else
spurious_interrupt();
}
......
......@@ -68,7 +68,7 @@ static void __init serial_init(void)
#else
s.iobase = SEAD_UART0_REGS_BASE+3;
#endif
s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0;
s.uartclk = SEAD_BASE_BAUD * 16;
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
s.iotype = UPIO_PORT;
......
......@@ -77,7 +77,7 @@ asmlinkage void plat_irq_dispatch(void)
irq = irq_ffs(pending);
if (irq > 0)
do_IRQ(MIPSCPU_INT_BASE + irq);
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
else
spurious_interrupt();
}
......
......@@ -71,8 +71,8 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
int vpflags = dvpe();
write_c0_compare (read_c0_count() - 1);
clear_c0_cause(0x100 << MIPSCPU_INT_CPUCTR);
set_c0_status(0x100 << MIPSCPU_INT_CPUCTR);
clear_c0_cause(0x100 << cp0_compare_irq);
set_c0_status(0x100 << cp0_compare_irq);
irq_enable_hazard();
evpe(vpflags);
......@@ -183,8 +183,8 @@ void __init plat_timer_setup(struct irqaction *irq)
}
else {
if (cpu_has_vint)
set_vi_handler(MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
/* we are using the cpu counter for timer interrupts */
......
......@@ -240,7 +240,7 @@ static int __init mipsnet_probe(struct device *dev)
* TODO: probe for these or load them from PARAM
*/
netdev->base_addr = 0x4200;
netdev->irq = MIPSCPU_INT_BASE + MIPSCPU_INT_MB0 +
netdev->irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB0 +
inl(mipsnet_reg_address(netdev, interruptInfo));
// Get the io region now, get irq on open()
......
......@@ -72,4 +72,13 @@ extern int allocate_irqno(void);
extern void alloc_legacy_irqno(void);
extern void free_irqno(unsigned int irq);
/*
* Before R2 the timer and performance counter interrupts were both fixed to
* IE7. Since R2 their number has to be read from the c0_intctl register.
*/
#define CP0_LEGACY_COMPARE_IRQ 7
extern int cp0_compare_irq;
extern int cp0_perfcount_irq;
#endif /* _ASM_IRQ_H */
......@@ -28,11 +28,6 @@
#include <irq.h>
/*
* Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
*/
#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
......@@ -42,7 +37,6 @@
#define MIPSCPU_INT_MB2 4
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_MB4 6
#define MIPSCPU_INT_CPUCTR 7
/*
* Interrupts 8..39 are used for Atlas interrupt controller interrupts
......
......@@ -32,11 +32,6 @@
*/
#define MALTA_INT_BASE 0
/*
* Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
*/
#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
......@@ -49,7 +44,6 @@
#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
#define MIPSCPU_INT_MB4 6
#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
#define MIPSCPU_INT_CPUCTR 7
/*
* Interrupts 64..127 are used for Soc-it Classic interrupts
......
......@@ -22,14 +22,7 @@
#include <irq.h>
/*
* Interrupts 0..7 are used for SEAD CPU interrupts
*/
#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPSCPU_INT_UART0 2
#define MIPSCPU_INT_UART1 3
#define MIPSCPU_INT_CPUCTR 7
#endif /* !(_MIPS_SEADINT_H) */
......@@ -21,15 +21,11 @@
#define SIM_INT_BASE 0
#define MIPSCPU_INT_MB0 2
#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPS_CPU_TIMER_IRQ 7
#define MIPSCPU_INT_CPUCTR 7
#define MSC01E_INT_BASE 64
#define MIPSCPU_INT_CPUCTR 7
#define MSC01E_INT_CPUCTR 11
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment