Commit 3b519e4e authored by Martin Wilck's avatar Martin Wilck Committed by Jesse Barnes

PCI: fix size checks for mmap() on /proc/bus/pci files

The checks for valid mmaps of PCI resources made through /proc/bus/pci files
that were introduced in 9eff02e2 have several
problems:

1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0,
whereas under /sys/bus/pci/devices, the start of the resource corresponds
to offset 0. This may lead to false negatives in pci_mmap_fits(), which
implicitly assumes the /sys/bus/pci/devices layout.

2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads
to false positives, because pci_mmap_fits() doesn't treat empty resources
correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT)
in this case!).

3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus
WARNINGS for the first resources that don't fit until the correct one is found.

On many controllers the first 2-4 BARs are used, and the others are empty.
In this case, an mmap attempt will first fail on the non-empty BARs
(including the "right" BAR because of 1.) and emit bogus WARNINGS because
of 3., and finally succeed on the first empty BAR because of 2.
This is certainly not the intended behaviour.

This patch addresses all 3 issues.
Updated with an enum type for the additional parameter for pci_mmap_fits().

Cc: stable@kernel.org
Signed-off-by: default avatarMartin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 4723d0f2
......@@ -705,17 +705,21 @@ void pci_remove_legacy_files(struct pci_bus *b)
#ifdef HAVE_PCI_MMAP
int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
enum pci_mmap_api mmap_api)
{
unsigned long nr, start, size;
unsigned long nr, start, size, pci_start;
if (pci_resource_len(pdev, resno) == 0)
return 0;
nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
if (start < size && size - start >= nr)
pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
if (start >= pci_start && start < pci_start + size &&
start + nr <= pci_start + size)
return 1;
WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
current->comm, start, start+nr, pci_name(pdev), resno, size);
return 0;
}
......@@ -745,8 +749,14 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
if (!pci_mmap_fits(pdev, i, vma))
if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
pci_name(pdev), i,
pci_resource_start(pdev, i), pci_resource_len(pdev, i));
return -EINVAL;
}
/* pci_mmap_page_range() expects the same kind of entry as coming
* from /proc/bus/pci/ which is a "user visible" value. If this is
......
......@@ -22,8 +22,13 @@ extern void pci_remove_firmware_label_files(struct pci_dev *pdev);
#endif
extern void pci_cleanup_rom(struct pci_dev *dev);
#ifdef HAVE_PCI_MMAP
enum pci_mmap_api {
PCI_MMAP_SYSFS, /* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
PCI_MMAP_PROCFS /* mmap on /proc/bus/pci/<BDF> */
};
extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
struct vm_area_struct *vma);
struct vm_area_struct *vmai,
enum pci_mmap_api mmap_api);
#endif
int pci_probe_reset_function(struct pci_dev *dev);
......
......@@ -257,7 +257,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
/* Make sure the caller is mapping a real resource for this device */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
if (pci_mmap_fits(dev, i, vma))
if (pci_mmap_fits(dev, i, vma, PCI_MMAP_PROCFS))
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment