Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker:
 "Fix for arch/sh build regression with newer binutils, removal of SH5,
  fixes for module exports, and misc cleanup"

* tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
  sh: remove sh5 support
  sh: add missing EXPORT_SYMBOL() for __delay
  sh: Convert ins[bwl]/outs[bwl] macros to inline functions
  sh: Convert iounmap() macros to inline functions
  sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
  sh: configs: Cleanup old Kconfig IO scheduler options
  arch/sh: vmlinux.scr
  sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
  sh: sh4a: Bring back tmu3_device early device

arch/sh/Kconfig

@@ -53,15 +53,6 @@ config SUPERH
 	select HAVE_NMI
 	select NEED_SG_DMA_LENGTH
 	select ARCH_HAS_GIGANTIC_PAGE
-
-	help
-	  The SuperH is a RISC processor targeted for use in embedded systems
-	  and consumer electronics; it was also used in the Sega Dreamcast
-	  gaming console.  The SuperH port has a home page at
-	  <http://www.linux-sh.org/>.
-
-config SUPERH32
-	def_bool "$(ARCH)" = "sh"
 	select ARCH_32BIT_OFF_T
 	select GUP_GET_PTE_LOW_HIGH if X2TLB
 	select HAVE_KPROBES
@@ -79,19 +70,15 @@ config SUPERH32
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 	select SPARSE_IRQ
 	select HAVE_STACKPROTECTOR
-
-config SUPERH64
-	def_bool "$(ARCH)" = "sh64"
-	select HAVE_EXIT_THREAD
-	select KALLSYMS
+	help
+	  The SuperH is a RISC processor targeted for use in embedded systems
+	  and consumer electronics; it was also used in the Sega Dreamcast
+	  gaming console.  The SuperH port has a home page at
+	  <http://www.linux-sh.org/>.
 
 config GENERIC_BUG
 	def_bool y
-	depends on BUG && SUPERH32
-
-config GENERIC_CSUM
-	def_bool y
-	depends on SUPERH64
+	depends on BUG
 
 config GENERIC_HWEIGHT
 	def_bool y
@@ -201,12 +188,6 @@ config CPU_SH4AL_DSP
 	select CPU_SH4A
 	select CPU_HAS_DSP
 
-config CPU_SH5
-	bool
-	select CPU_HAS_FPU
-	select SYS_SUPPORTS_SH_TMU
-	select SYS_SUPPORTS_HUGETLBFS if MMU
-
 config CPU_SHX2
 	bool
 
@@ -226,8 +207,6 @@ config CPU_HAS_PMU
        default y
        bool
 
-if SUPERH32
-
 choice
 	prompt "Processor sub-type selection"
 
@@ -516,27 +495,6 @@ config CPU_SUBTYPE_SH7366
 
 endchoice
 
-endif
-
-if SUPERH64
-
-choice
-	prompt "Processor sub-type selection"
-
-# SH-5 Processor Support
-
-config CPU_SUBTYPE_SH5_101
-	bool "Support SH5-101 processor"
-	select CPU_SH5
-
-config CPU_SUBTYPE_SH5_103
-	bool "Support SH5-103 processor"
-	select CPU_SH5
-
-endchoice
-
-endif
-
 source "arch/sh/mm/Kconfig"
  
 source "arch/sh/Kconfig.cpu"
@@ -590,7 +548,7 @@ source "kernel/Kconfig.hz"
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on SUPERH32 && MMU
+	depends on MMU
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
@@ -608,7 +566,7 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on SUPERH32 && BROKEN_ON_SMP
+	depends on BROKEN_ON_SMP
 	help
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
@@ -622,7 +580,7 @@ config CRASH_DUMP
 
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
-	depends on SUPERH32 && KEXEC && HIBERNATION
+	depends on KEXEC && HIBERNATION
 	help
 	  Jump between original kernel and kexeced kernel and invoke
 	  code via KEXEC
@@ -699,7 +657,7 @@ config HOTPLUG_CPU
 
 config GUSA
 	def_bool y
-	depends on !SMP && SUPERH32
+	depends on !SMP
 	help
 	  This enables support for gUSA (general UserSpace Atomicity).
 	  This is the default implementation for both UP and non-ll/sc

arch/sh/Kconfig.cpu

@@ -13,7 +13,6 @@ config CPU_LITTLE_ENDIAN
 
 config CPU_BIG_ENDIAN
 	bool "Big Endian"
-	depends on !CPU_SH5
 
 endchoice
 
@@ -27,10 +26,6 @@ config SH_FPU
 
 	  This option must be set in order to enable the FPU.
 
-config SH64_FPU_DENORM_FLUSH
-	bool "Flush floating point denorms to zero"
-	depends on SH_FPU && SUPERH64
-
 config SH_FPU_EMU
 	def_bool n
 	prompt "FPU emulation support"
@@ -77,10 +72,6 @@ config SPECULATIVE_EXECUTION
 
 	  If unsure, say N.
 
-config SH64_ID2815_WORKAROUND
-	bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
-	depends on CPU_SUBTYPE_SH5_101
-
 config CPU_HAS_INTEVT
 	bool
 

arch/sh/Kconfig.debug

@@ -5,7 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT
 
 config SH_STANDARD_BIOS
 	bool "Use LinuxSH standard BIOS"
-	depends on SUPERH32
 	help
 	  Say Y here if your target has the gdb-sh-stub
 	  package from www.m17n.org (or any conforming standard LinuxSH BIOS)
@@ -19,7 +18,7 @@ config SH_STANDARD_BIOS
 
 config STACK_DEBUG
 	bool "Check for stack overflows"
-	depends on DEBUG_KERNEL && SUPERH32
+	depends on DEBUG_KERNEL
 	help
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit. Saying Y here will add overhead to
@@ -38,7 +37,7 @@ config 4KSTACKS
 
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
-	depends on DEBUG_KERNEL && SUPERH32 && BROKEN
+	depends on DEBUG_KERNEL && BROKEN
 	help
 	  If you say Y here the kernel will use separate kernel stacks
 	  for handling hard and soft interrupts.  This can help avoid
@@ -46,7 +45,7 @@ config IRQSTACKS
 
 config DUMP_CODE
 	bool "Show disassembly of nearby code in register dumps"
-	depends on DEBUG_KERNEL && SUPERH32
+	depends on DEBUG_KERNEL
 	default y if DEBUG_BUGVERBOSE
 	default n
 	help
@@ -59,7 +58,6 @@ config DUMP_CODE
 config DWARF_UNWINDER
 	bool "Enable the DWARF unwinder for stacktraces"
 	select FRAME_POINTER
-	depends on SUPERH32
 	default n
 	help
 	  Enabling this option will make stacktraces more accurate, at
@@ -77,11 +75,6 @@ config SH_NO_BSS_INIT
 	  For all other cases, say N. If this option seems perplexing, or
 	  you aren't sure, say N.
 
-config SH64_SR_WATCH
-	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
-	depends on SUPERH64
-
 config MCOUNT
 	def_bool y
-	depends on SUPERH32
 	depends on STACK_DEBUG || FUNCTION_TRACER

arch/sh/Makefile

@@ -11,7 +11,7 @@
 #
 ifneq ($(SUBARCH),$(ARCH))
   ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+    CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-)
   endif
 endif
 
@@ -29,12 +29,9 @@ isa-$(CONFIG_CPU_SH3)			:= sh3
 isa-$(CONFIG_CPU_SH4)			:= sh4
 isa-$(CONFIG_CPU_SH4A)			:= sh4a
 isa-$(CONFIG_CPU_SH4AL_DSP)		:= sh4al
-isa-$(CONFIG_CPU_SH5)			:= shmedia
 
-ifeq ($(CONFIG_SUPERH32),y)
 isa-$(CONFIG_SH_DSP)			:= $(isa-y)-dsp
 isa-y					:= $(isa-y)-up
-endif
 
 cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
 cflags-$(CONFIG_CPU_J2)			+= $(call cc-option,-mj2,)
@@ -47,7 +44,6 @@ cflags-$(CONFIG_CPU_SH4)		:= $(call cc-option,-m4,) \
 cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
 					   $(call cc-option,-m4a-nofpu,)
 cflags-$(CONFIG_CPU_SH4AL_DSP)		+= $(call cc-option,-m4al,)
-cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)
 
 ifeq ($(cflags-y),)
 #
@@ -88,7 +84,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 		   -R .stab -R .stabstr -S
 
 # Give the various platforms the opportunity to set default image types
-defaultimage-$(CONFIG_SUPERH32)			:= zImage
+defaultimage-y					:= zImage
 defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
 defaultimage-$(CONFIG_SH_RSK)			:= uImage
 defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
@@ -107,31 +103,22 @@ KBUILD_IMAGE		:= $(boot)/$(defaultimage-y)
 # Choosing incompatible machines durings configuration will result in
 # error messages during linking.
 #
-ifdef CONFIG_SUPERH32
 UTS_MACHINE		:= sh
-BITS			:= 32
 LDFLAGS_vmlinux		+= -e _stext
-else
-UTS_MACHINE		:= sh64
-BITS			:= 64
-LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
-			   --defsym phys_stext_shmedia=phys_stext+1 \
-			   -e phys_stext_shmedia
-endif
 
 ifdef CONFIG_CPU_LITTLE_ENDIAN
-ld-bfd			:= elf32-$(UTS_MACHINE)-linux
+ld-bfd			:= elf32-sh-linux
 LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
 KBUILD_LDFLAGS		+= -EL
 else
-ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
+ld-bfd			:= elf32-shbig-linux
 LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
 KBUILD_LDFLAGS		+= -EB
 endif
 
-export ld-bfd BITS
+export ld-bfd
 
-head-y	:= arch/sh/kernel/head_$(BITS).o
+head-y	:= arch/sh/kernel/head_32.o
 
 core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
@@ -185,7 +172,6 @@ cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
 cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
 cpuincdir-$(CONFIG_CPU_SH4A)	+= cpu-sh4a
 cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
 cpuincdir-y			+= cpu-common	# Must be last
 
 drivers-y			+= arch/sh/drivers/
@@ -206,8 +192,7 @@ ifeq ($(CONFIG_DWARF_UNWINDER),y)
   KBUILD_CFLAGS += -fasynchronous-unwind-tables
 endif
 
-libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
-libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
+libs-y			:= arch/sh/lib/	$(libs-y)
 
 BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
 	       uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \

arch/sh/boot/compressed/Makefile

@@ -8,9 +8,9 @@
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   vmlinux.bin.bz2 vmlinux.bin.lzma \
 		   vmlinux.bin.xz vmlinux.bin.lzo \
-		   head_$(BITS).o misc.o piggy.o
+		   head_32.o misc.o piggy.o
 
-OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
+OBJECTS = $(obj)/head_32.o $(obj)/misc.o $(obj)/cache.o
 
 GCOV_PROFILE := n
 
@@ -39,15 +39,11 @@ LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
 #
 # Pull in the necessary libgcc bits from the in-kernel implementation.
 #
-lib1funcs-$(CONFIG_SUPERH32)	:= ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \
-				   lshrsi3.S
-lib1funcs-obj			:= \
+lib1funcs-y	:= ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S
+lib1funcs-obj   := \
 	$(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
 
 lib1funcs-dir		:= $(srctree)/arch/$(SRCARCH)/lib
-ifeq ($(BITS),64)
-	lib1funcs-dir 	:= $(addsuffix $(BITS), $(lib1funcs-dir))
-endif
 
 KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING
 

arch/sh/boot/compressed/misc.c

@@ -116,11 +116,7 @@ void ftrace_stub(void)
 {
 }
 
-#ifdef CONFIG_SUPERH64
-#define stackalign	8
-#else
 #define stackalign	4
-#endif
 
 #define STACK_SIZE (4096)
 long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
@@ -130,13 +126,9 @@ void decompress_kernel(void)
 {
 	unsigned long output_addr;
 
-#ifdef CONFIG_SUPERH64
-	output_addr = (CONFIG_MEMORY_START + 0x2000);
-#else
 	output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
 #if defined(CONFIG_29BIT)
 	output_addr |= P2SEG;
-#endif
 #endif
 
 	output = (unsigned char *)output_addr;

arch/sh/boot/compressed/vmlinux.scr

 SECTIONS
 {
-  .rodata..compressed : {
+  .rodata..compressed : ALIGN(8) {
 	input_len = .;
 	LONG(input_data_end - input_data) input_data = .;
 	*(.data)

arch/sh/configs/apsh4ad0a_defconfig

@@ -20,7 +20,8 @@ CONFIG_PROFILING=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
 CONFIG_CPU_SUBTYPE_SH7786=y
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y

arch/sh/configs/kfr2r09_defconfig

@@ -10,8 +10,6 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_FLATMEM_MANUAL=y

arch/sh/configs/magicpanelr2_defconfig

@@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000

arch/sh/configs/polaris_defconfig

@@ -12,7 +12,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_CPU_SUBTYPE_SH7709=y
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_FLATMEM_MANUAL=y

arch/sh/configs/r7780mp_defconfig

@@ -12,8 +12,6 @@ CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_FLATMEM_MANUAL=y

arch/sh/configs/r7785rp_defconfig

@@ -15,8 +15,6 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y

arch/sh/configs/rsk7201_defconfig

@@ -15,8 +15,6 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7201=y
 CONFIG_MEMORY_SIZE=0x01000000
 CONFIG_FLATMEM_MANUAL=y

arch/sh/configs/rsk7203_defconfig

@@ -16,8 +16,6 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7203=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000

arch/sh/configs/rsk7264_defconfig

@@ -17,8 +17,6 @@ CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_PROFILING=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7264=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_FLATMEM_MANUAL=y

arch/sh/configs/rsk7269_defconfig

@@ -4,8 +4,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_CPU_SUBTYPE_SH7269=y
 CONFIG_MEMORY_START=0x0c000000

arch/sh/configs/sdk7786_defconfig

@@ -39,7 +39,8 @@ CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_IOSCHED_BFQ=y
+CONFIG_BFQ_GROUP_IOSCHED=y
 CONFIG_CPU_SUBTYPE_SH7786=y
 CONFIG_MEMORY_START=0x40000000
 CONFIG_MEMORY_SIZE=0x20000000

arch/sh/configs/se7206_defconfig

@@ -28,8 +28,6 @@ CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_FLATMEM_MANUAL=y

arch/sh/configs/se7343_defconfig

@@ -11,7 +11,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000

arch/sh/configs/se7619_defconfig

@@ -11,8 +11,6 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_FLATMEM_MANUAL=y
 CONFIG_CPU_BIG_ENDIAN=y

arch/sh/configs/se7705_defconfig

@@ -8,8 +8,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7705=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000

arch/sh/configs/se7712_defconfig

@@ -12,8 +12,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000

arch/sh/configs/se7721_defconfig

@@ -12,8 +12,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7721=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000

arch/sh/configs/se7722_defconfig

@@ -8,8 +8,6 @@ CONFIG_PROFILING=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_NUMA=y

arch/sh/configs/se7780_defconfig

@@ -9,7 +9,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_SH_7780_SOLUTION_ENGINE=y

arch/sh/configs/sh7710voipgw_defconfig

@@ -11,7 +11,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7710=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000

arch/sh/configs/sh7757lcr_defconfig

@@ -36,7 +36,7 @@ CONFIG_IPV6=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y

arch/sh/configs/shmin_defconfig

@@ -12,8 +12,6 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SHMEM is not set
 CONFIG_SLOB=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7706=y
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000

arch/sh/configs/ul2_defconfig

@@ -8,8 +8,6 @@ CONFIG_PROFILING=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_CPU_SUBTYPE_SH7366=y
 CONFIG_MEMORY_SIZE=0x01f00000
 CONFIG_NUMA=y

arch/sh/drivers/pci/Makefile

@@ -10,7 +10,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= pcie-sh7786.o ops-sh7786.o
-obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
 					   pci-dreamcast.o

arch/sh/drivers/pci/ops-sh5.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support functions for the SH5 PCI hardware.
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- */
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include "pci-sh5.h"
-
-static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 *val)
-{
-	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
-	switch (size) {
-		case 1:
-			*val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
-			break;
-		case 2:
-			*val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
-			break;
-		case 4:
-			*val = SH5PCI_READ(PDR);
-			break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-			 int size, u32 val)
-{
-	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
-	switch (size) {
-		case 1:
-			SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
-			break;
-		case 2:
-			SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
-			break;
-		case 4:
-			SH5PCI_WRITE(PDR, val);
-			break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops sh5_pci_ops = {
-	.read		= sh5pci_read,
-	.write		= sh5pci_write,
-};

arch/sh/drivers/pci/pci-sh5.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- *
- * Support functions for the SH5 PCI hardware.
- */
-
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <cpu/irq.h>
-#include <asm/io.h>
-#include "pci-sh5.h"
-
-unsigned long pcicr_virt;
-unsigned long PCI_IO_AREA;
-
-/* Rounds a number UP to the nearest power of two. Used for
- * sizing the PCI window.
- */
-static u32 __init r2p2(u32 num)
-{
-	int i = 31;
-	u32 tmp = num;
-
-	if (num == 0)
-		return 0;
-
-	do {
-		if (tmp & (1 << 31))
-			break;
-		i--;
-		tmp <<= 1;
-	} while (i >= 0);
-
-	tmp = 1 << i;
-	/* If the original number isn't a power of 2, round it up */
-	if (tmp != num)
-		tmp <<= 1;
-
-	return tmp;
-}
-
-static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	unsigned pci_int, pci_air, pci_cir, pci_aint;
-
-	pci_int = SH5PCI_READ(INT);
-	pci_cir = SH5PCI_READ(CIR);
-	pci_air = SH5PCI_READ(AIR);
-
-	if (pci_int) {
-		printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
-		printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
-		printk("PCI AIR -> 0x%x\n", pci_air);
-		printk("PCI CIR -> 0x%x\n", pci_cir);
-		SH5PCI_WRITE(INT, ~0);
-	}
-
-	pci_aint = SH5PCI_READ(AINT);
-	if (pci_aint) {
-		printk("PCI ARB INTERRUPT!\n");
-		printk("PCI AINT -> 0x%x\n", pci_aint);
-		printk("PCI AIR -> 0x%x\n", pci_air);
-		printk("PCI CIR -> 0x%x\n", pci_cir);
-		SH5PCI_WRITE(AINT, ~0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
-{
-	printk("SERR IRQ\n");
-
-	return IRQ_NONE;
-}
-
-static struct resource sh5_pci_resources[2];
-
-static struct pci_channel sh5pci_controller = {
-	.pci_ops		= &sh5_pci_ops,
-	.resources		= sh5_pci_resources,
-	.nr_resources		= ARRAY_SIZE(sh5_pci_resources),
-	.mem_offset		= 0x00000000,
-	.io_offset		= 0x00000000,
-};
-
-static int __init sh5pci_init(void)
-{
-	unsigned long memStart = __pa(memory_start);
-	unsigned long memSize = __pa(memory_end) - memStart;
-	u32 lsr0;
-	u32 uval;
-
-        if (request_irq(IRQ_ERR, pcish5_err_irq,
-                        0, "PCI Error",NULL) < 0) {
-                printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
-                return -EINVAL;
-        }
-
-        if (request_irq(IRQ_SERR, pcish5_serr_irq,
-                        0, "PCI SERR interrupt", NULL) < 0) {
-                printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
-                return -EINVAL;
-        }
-
-	pcicr_virt = (unsigned long)ioremap(SH5PCI_ICR_BASE, 1024);
-	if (!pcicr_virt) {
-		panic("Unable to remap PCICR\n");
-	}
-
-	PCI_IO_AREA = (unsigned long)ioremap(SH5PCI_IO_BASE, 0x10000);
-	if (!PCI_IO_AREA) {
-		panic("Unable to remap PCIIO\n");
-	}
-
-	/* Clear snoop registers */
-        SH5PCI_WRITE(CSCR0, 0);
-        SH5PCI_WRITE(CSCR1, 0);
-
-        /* Switch off interrupts */
-        SH5PCI_WRITE(INTM,  0);
-        SH5PCI_WRITE(AINTM, 0);
-        SH5PCI_WRITE(PINTM, 0);
-
-        /* Set bus active, take it out of reset */
-        uval = SH5PCI_READ(CR);
-
-	/* Set command Register */
-        SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE |
-		     CR_PFCS | CR_BMAM);
-
-	uval=SH5PCI_READ(CR);
-
-        /* Allow it to be a master */
-	/* NB - WE DISABLE I/O ACCESS to stop overlap */
-        /* set WAIT bit to enable stepping, an attempt to improve stability */
-	SH5PCI_WRITE_SHORT(CSR_CMD,
-			    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			    PCI_COMMAND_WAIT);
-
-        /*
-        ** Set translation mapping memory in order to convert the address
-        ** used for the main bus, to the PCI internal address.
-        */
-        SH5PCI_WRITE(MBR,0x40000000);
-
-        /* Always set the max size 512M */
-        SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
-
-        /*
-        ** I/O addresses are mapped at internal PCI specific address
-        ** as is described into the configuration bridge table.
-        ** These are changed to 0, to allow cards that have legacy
-        ** io such as vga to function correctly. We set the SH5 IOBAR to
-        ** 256K, which is a bit big as we can only have 64K of address space
-        */
-
-        SH5PCI_WRITE(IOBR,0x0);
-
-        /* Set up a 256K window. Totally pointless waste  of address space */
-        SH5PCI_WRITE(IOBMR,0);
-
-	/* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec.
-	 * Ideally, we would want to map the I/O region somewhere, but it
-	 * is so big this is not that easy!
-         */
-	SH5PCI_WRITE(CSR_IBAR0,~0);
-	/* Set memory size value */
-        memSize = memory_end - memory_start;
-
-	/* Now we set up the mbars so the PCI bus can see the memory of
-	 * the machine */
-	if (memSize < (1024 * 1024)) {
-                printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n",
-		       memSize);
-                return -EINVAL;
-        }
-
-        /* Set LSR 0 */
-        lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 :
-		((r2p2(memSize) - 0x100000) | 0x1);
-        SH5PCI_WRITE(LSR0, lsr0);
-
-        /* Set MBAR 0 */
-        SH5PCI_WRITE(CSR_MBAR0, memory_start);
-        SH5PCI_WRITE(LAR0, memory_start);
-
-        SH5PCI_WRITE(CSR_MBAR1,0);
-        SH5PCI_WRITE(LAR1,0);
-        SH5PCI_WRITE(LSR1,0);
-
-        /* Enable the PCI interrupts on the device */
-        SH5PCI_WRITE(INTM,  ~0);
-        SH5PCI_WRITE(AINTM, ~0);
-        SH5PCI_WRITE(PINTM, ~0);
-
-	sh5_pci_resources[0].start = PCI_IO_AREA;
-	sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
-
-	sh5_pci_resources[1].start = memStart;
-	sh5_pci_resources[1].end = memStart + memSize;
-
-	return register_pci_controller(&sh5pci_controller);
-}
-arch_initcall(sh5pci_init);

arch/sh/drivers/pci/pci-sh5.h

-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * Definitions for the SH5 PCI hardware.
- */
-#ifndef __PCI_SH5_H
-#define __PCI_SH5_H
-
-/* Product ID */
-#define PCISH5_PID		0x350d
-
-/* vendor ID */
-#define PCISH5_VID		0x1054
-
-/* Configuration types */
-#define ST_TYPE0                0x00    /* Configuration cycle type 0 */
-#define ST_TYPE1                0x01    /* Configuration cycle type 1 */
-
-/* VCR data */
-#define PCISH5_VCR_STATUS      0x00
-#define PCISH5_VCR_VERSION     0x08
-
-/*
-** ICR register offsets and bits
-*/
-#define PCISH5_ICR_CR          0x100   /* PCI control register values */
-#define CR_PBAM                 (1<<12)
-#define CR_PFCS                 (1<<11)
-#define CR_FTO                  (1<<10)
-#define CR_PFE                  (1<<9)
-#define CR_TBS                  (1<<8)
-#define CR_SPUE                 (1<<7)
-#define CR_BMAM                 (1<<6)
-#define CR_HOST                 (1<<5)
-#define CR_CLKEN                (1<<4)
-#define CR_SOCS                 (1<<3)
-#define CR_IOCS                 (1<<2)
-#define CR_RSTCTL               (1<<1)
-#define CR_CFINT                (1<<0)
-#define CR_LOCK_MASK            0xa5000000
-
-#define PCISH5_ICR_INT         0x114   /* Interrupt registert values     */
-#define INT_MADIM               (1<<2)
-
-#define PCISH5_ICR_LSR0        0X104   /* Local space register values    */
-#define PCISH5_ICR_LSR1        0X108   /* Local space register values    */
-#define PCISH5_ICR_LAR0        0x10c   /* Local address register values  */
-#define PCISH5_ICR_LAR1        0x110   /* Local address register values  */
-#define PCISH5_ICR_INTM        0x118   /* Interrupt mask register values                         */
-#define PCISH5_ICR_AIR         0x11c   /* Interrupt error address information register values    */
-#define PCISH5_ICR_CIR         0x120   /* Interrupt error command information register values    */
-#define PCISH5_ICR_AINT        0x130   /* Interrupt error arbiter interrupt register values      */
-#define PCISH5_ICR_AINTM       0x134   /* Interrupt error arbiter interrupt mask register values */
-#define PCISH5_ICR_BMIR        0x138   /* Interrupt error info register of bus master values     */
-#define PCISH5_ICR_PAR         0x1c0   /* Pio address register values                            */
-#define PCISH5_ICR_MBR         0x1c4   /* Memory space bank register values                      */
-#define PCISH5_ICR_IOBR        0x1c8   /* I/O space bank register values                         */
-#define PCISH5_ICR_PINT        0x1cc   /* power management interrupt register values             */
-#define PCISH5_ICR_PINTM       0x1d0   /* power management interrupt mask register values        */
-#define PCISH5_ICR_MBMR        0x1d8   /* memory space bank mask register values                 */
-#define PCISH5_ICR_IOBMR       0x1dc   /* I/O space bank mask register values                    */
-#define PCISH5_ICR_CSCR0       0x210   /* PCI cache snoop control register 0                     */
-#define PCISH5_ICR_CSCR1       0x214   /* PCI cache snoop control register 1                     */
-#define PCISH5_ICR_PDR         0x220   /* Pio data register values                               */
-
-/* These are configs space registers */
-#define PCISH5_ICR_CSR_VID     0x000	/* Vendor id                           */
-#define PCISH5_ICR_CSR_DID     0x002   /* Device id                           */
-#define PCISH5_ICR_CSR_CMD     0x004   /* Command register                    */
-#define PCISH5_ICR_CSR_STATUS  0x006   /* Stautus                             */
-#define PCISH5_ICR_CSR_IBAR0   0x010   /* I/O base address register           */
-#define PCISH5_ICR_CSR_MBAR0   0x014   /* First  Memory base address register */
-#define PCISH5_ICR_CSR_MBAR1   0x018   /* Second Memory base address register */
-
-/* Base address of registers */
-#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
-#define SH5PCI_IO_BASE  (PHYS_PCI_BLOCK + 0x00800000)
-/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG)    */
-
-extern unsigned long pcicr_virt;
-/* Register selection macro */
-#define PCISH5_ICR_REG(x)                ( pcicr_virt + (PCISH5_ICR_##x))
-/* #define PCISH5_VCR_REG(x)                ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
-
-/* Write I/O functions */
-#define SH5PCI_WRITE(reg,val)        __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val)  __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val)   __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
-
-/* Read I/O functions */
-#define SH5PCI_READ(reg)             __raw_readl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg)       __raw_readw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg)        __raw_readb(PCISH5_ICR_REG(reg))
-
-/* Set PCI config bits */
-#define SET_CONFIG_BITS(bus,devfn,where)  ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
-
-/* Set PCI command register */
-#define CONFIG_CMD(bus, devfn, where)            SET_CONFIG_BITS(bus->number,devfn,where)
-
-/* Size converters */
-#define PCISH5_MEM_SIZCONV(x)		  (((x / 0x40000) - 1) << 18)
-#define PCISH5_IO_SIZCONV(x)		  (((x / 0x40000) - 1) << 18)
-
-extern struct pci_ops sh5_pci_ops;
-
-#endif /* __PCI_SH5_H */

arch/sh/include/asm/barrier.h

@@ -6,7 +6,7 @@
 #ifndef __ASM_SH_BARRIER_H
 #define __ASM_SH_BARRIER_H
 
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#if defined(CONFIG_CPU_SH4A)
 #include <asm/cache_insns.h>
 #endif
 
@@ -24,7 +24,7 @@
  * Historically we have only done this type of barrier for the MMUCR, but
  * it's also necessary for the CCR, so we make it generic here instead.
  */
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#if defined(CONFIG_CPU_SH4A)
 #define mb()		__asm__ __volatile__ ("synco": : :"memory")
 #define rmb()		mb()
 #define wmb()		mb()

arch/sh/include/asm/bitops.h

@@ -26,7 +26,6 @@
 #include <asm-generic/bitops/non-atomic.h>
 #endif
 
-#ifdef CONFIG_SUPERH32
 static inline unsigned long ffz(unsigned long word)
 {
 	unsigned long result;
@@ -60,31 +59,6 @@ static inline unsigned long __ffs(unsigned long word)
 		: "t");
 	return result;
 }
-#else
-static inline unsigned long ffz(unsigned long word)
-{
-	unsigned long result, __d2, __d3;
-
-        __asm__("gettr  tr0, %2\n\t"
-                "pta    $+32, tr0\n\t"
-                "andi   %1, 1, %3\n\t"
-                "beq    %3, r63, tr0\n\t"
-                "pta    $+4, tr0\n"
-                "0:\n\t"
-                "shlri.l        %1, 1, %1\n\t"
-                "addi   %0, 1, %0\n\t"
-                "andi   %1, 1, %3\n\t"
-                "beqi   %3, 1, tr0\n"
-                "1:\n\t"
-                "ptabs  %2, tr0\n\t"
-                : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
-                : "0" (0L), "1" (word));
-
-	return result;
-}
-
-#include <asm-generic/bitops/__ffs.h>
-#endif
 
 #include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/ffs.h>

arch/sh/include/asm/bl_bit.h

 /* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BL_BIT_H
-#define __ASM_SH_BL_BIT_H
-
-#ifdef CONFIG_SUPERH32
-# include <asm/bl_bit_32.h>
-#else
-# include <asm/bl_bit_64.h>
-#endif
-
-#endif /* __ASM_SH_BL_BIT_H */
+#include <asm/bl_bit_32.h>

arch/sh/include/asm/bl_bit_64.h

-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#ifndef __ASM_SH_BL_BIT_64_H
-#define __ASM_SH_BL_BIT_64_H
-
-#include <asm/processor.h>
-
-#define SR_BL_LL	0x0000000010000000LL
-
-static inline void set_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-#endif /* __ASM_SH_BL_BIT_64_H */

arch/sh/include/asm/bugs.h

@@ -53,10 +53,6 @@ static void __init check_bugs(void)
 		*p++ = 's';
 		*p++ = 'p';
 		break;
-	case CPU_FAMILY_SH5:
-		*p++ = '6';
-		*p++ = '4';
-		break;
 	case CPU_FAMILY_UNKNOWN:
 		/*
 		 * Specifically use CPU_FAMILY_UNKNOWN rather than

arch/sh/include/asm/cache_insns.h

 /* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CACHE_INSNS_H
-#define __ASM_SH_CACHE_INSNS_H
-
-
-#ifdef CONFIG_SUPERH32
-# include <asm/cache_insns_32.h>
-#else
-# include <asm/cache_insns_64.h>
-#endif
-
-#endif /* __ASM_SH_CACHE_INSNS_H */
+#include <asm/cache_insns_32.h>

arch/sh/include/asm/cache_insns_64.h

-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#ifndef __ASM_SH_CACHE_INSNS_64_H
-#define __ASM_SH_CACHE_INSNS_64_H
-
-#define __icbi(addr)	__asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
-#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
-#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
-#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr))
-
-static inline reg_size_t register_align(void *val)
-{
-	return (unsigned long long)(signed long long)(signed long)val;
-}
-
-#endif /* __ASM_SH_CACHE_INSNS_64_H */

arch/sh/include/asm/checksum.h

 /* SPDX-License-Identifier: GPL-2.0 */
-#ifdef CONFIG_SUPERH32
-# include <asm/checksum_32.h>
-#else
-# include <asm-generic/checksum.h>
-#endif
+#include <asm/checksum_32.h>

arch/sh/include/asm/elf.h

@@ -133,28 +133,6 @@ typedef struct user_fpu_struct elf_fpregset_t;
 
 #define ELF_PLATFORM	(utsname()->machine)
 
-#ifdef __SH5__
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
-       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
-       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
-       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
-       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
-       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
-       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
-       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
-       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
-       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
-       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
-       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
-       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
-       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
-       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
-       _r->sr = SR_FD | SR_MMU; } while (0)
-#else
 #define ELF_PLAT_INIT(_r, load_addr) \
   do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
        _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
@@ -182,7 +160,6 @@ do {									\
 	_r->regs[14]	= 0;						\
 	_r->sr		= SR_FD;					\
 } while (0)
-#endif
 
 #define SET_PERSONALITY(ex) \
 	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))

arch/sh/include/asm/extable.h

@@ -4,8 +4,4 @@
 
 #include <asm-generic/extable.h>
 
-#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
-#define ARCH_HAS_SEARCH_EXTABLE
-#endif
-
 #endif

arch/sh/include/asm/fixmap.h

@@ -83,11 +83,7 @@ extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
  * the start of the fixmap, and leave one page empty
  * at the top of mem..
  */
-#ifdef CONFIG_SUPERH32
 #define FIXADDR_TOP	(P4SEG - PAGE_SIZE)
-#else
-#define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
-#endif
 #define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
 

arch/sh/include/asm/io.h

@@ -115,12 +115,8 @@ static inline void pfx##reads##bwlq(volatile void __iomem *mem,		\
 __BUILD_MEMORY_STRING(__raw_, b, u8)
 __BUILD_MEMORY_STRING(__raw_, w, u16)
 
-#ifdef CONFIG_SUPERH32
 void __raw_writesl(void __iomem *addr, const void *data, int longlen);
 void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-#else
-__BUILD_MEMORY_STRING(__raw_, l, u32)
-#endif
 
 __BUILD_MEMORY_STRING(__raw_, q, u64)
 
@@ -328,7 +324,7 @@ __ioremap_mode(phys_addr_t offset, unsigned long size, pgprot_t prot)
 #else
 #define __ioremap(offset, size, prot)		((void __iomem *)(offset))
 #define __ioremap_mode(offset, size, prot)	((void __iomem *)(offset))
-#define iounmap(addr)				do { } while (0)
+static inline void iounmap(void __iomem *addr) {}
 #endif /* CONFIG_MMU */
 
 static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)

arch/sh/include/asm/io_noioport.h

@@ -53,12 +53,34 @@ static inline void ioport_unmap(void __iomem *addr)
 #define outw_p(x, addr)	outw((x), (addr))
 #define outl_p(x, addr)	outl((x), (addr))
 
-#define insb(a, b, c)	BUG()
-#define insw(a, b, c)	BUG()
-#define insl(a, b, c)	BUG()
+static inline void insb(unsigned long port, void *dst, unsigned long count)
+{
+	BUG();
+}
+
+static inline void insw(unsigned long port, void *dst, unsigned long count)
+{
+	BUG();
+}
+
+static inline void insl(unsigned long port, void *dst, unsigned long count)
+{
+	BUG();
+}
 
-#define outsb(a, b, c)	BUG()
-#define outsw(a, b, c)	BUG()
-#define outsl(a, b, c)	BUG()
+static inline void outsb(unsigned long port, const void *src, unsigned long count)
+{
+	BUG();
+}
+
+static inline void outsw(unsigned long port, const void *src, unsigned long count)
+{
+	BUG();
+}
+
+static inline void outsl(unsigned long port, const void *src, unsigned long count)
+{
+	BUG();
+}
 
 #endif /* __ASM_SH_IO_NOIOPORT_H */

arch/sh/include/asm/irq.h

@@ -66,8 +66,5 @@ extern void irq_finish(unsigned int irq);
 #endif
 
 #include <asm-generic/irq.h>
-#ifdef CONFIG_CPU_SH5
-#include <cpu/irq.h>
-#endif
 
 #endif /* __ASM_SH_IRQ_H */

arch/sh/include/asm/mmu_context.h

@@ -48,11 +48,7 @@
  */
 #define MMU_VPN_MASK	0xfffff000
 
-#if defined(CONFIG_SUPERH32)
 #include <asm/mmu_context_32.h>
-#else
-#include <asm/mmu_context_64.h>
-#endif
 
 /*
  * Get MMU context if needed.
@@ -74,14 +70,6 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
 		 */
 		local_flush_tlb_all();
 
-#ifdef CONFIG_SUPERH64
-		/*
-		 * The SH-5 cache uses the ASIDs, requiring both the I and D
-		 * cache to be flushed when the ASID is exhausted. Weak.
-		 */
-		flush_cache_all();
-#endif
-
 		/*
 		 * Fix version; Note that we avoid version #0
 		 * to distinguish NO_CONTEXT.

arch/sh/include/asm/mmu_context_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_MMU_CONTEXT_64_H
-#define __ASM_SH_MMU_CONTEXT_64_H
-
-/*
- * sh64-specific mmu_context interface.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- */
-#include <cpu/registers.h>
-#include <asm/cacheflush.h>
-
-#define SR_ASID_MASK		0xffffffffff00ffffULL
-#define SR_ASID_SHIFT		16
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	/* Well, at least free TLB entries */
-	flush_tlb_mm(mm);
-}
-
-static inline unsigned long get_asid(void)
-{
-	unsigned long long sr;
-
-	asm volatile ("getcon   " __SR ", %0\n\t"
-		      : "=r" (sr));
-
-	sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
-	return (unsigned long) sr;
-}
-
-/* Set ASID into SR */
-static inline void set_asid(unsigned long asid)
-{
-	unsigned long long sr, pc;
-
-	asm volatile ("getcon	" __SR ", %0" : "=r" (sr));
-
-	sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
-
-	/*
-	 * It is possible that this function may be inlined and so to avoid
-	 * the assembler reporting duplicate symbols we make use of the
-	 * gas trick of generating symbols using numerics and forward
-	 * reference.
-	 */
-	asm volatile ("movi	1, %1\n\t"
-		      "shlli	%1, 28, %1\n\t"
-		      "or	%0, %1, %1\n\t"
-		      "putcon	%1, " __SR "\n\t"
-		      "putcon	%0, " __SSR "\n\t"
-		      "movi	1f, %1\n\t"
-		      "ori	%1, 1 , %1\n\t"
-		      "putcon	%1, " __SPC "\n\t"
-		      "rte\n"
-		      "1:\n\t"
-		      : "=r" (sr), "=r" (pc) : "0" (sr));
-}
-
-/* arch/sh/kernel/cpu/sh5/entry.S */
-extern unsigned long switch_and_save_asid(unsigned long new_asid);
-
-/* No spare register to twiddle, so use a software cache */
-extern pgd_t *mmu_pdtp_cache;
-
-#define set_TTB(pgd)	(mmu_pdtp_cache = (pgd))
-#define get_TTB()	(mmu_pdtp_cache)
-
-#endif /* __ASM_SH_MMU_CONTEXT_64_H */

arch/sh/include/asm/page.h

@@ -35,8 +35,6 @@
 #define HPAGE_SHIFT	22
 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
 #define HPAGE_SHIFT	26
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define HPAGE_SHIFT	29
 #endif
 
 #ifdef CONFIG_HUGETLB_PAGE
@@ -82,18 +80,12 @@ typedef struct { unsigned long long pgd; } pgd_t;
 	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
 #define __pte(x) \
 	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#elif defined(CONFIG_SUPERH32)
+#else
 typedef struct { unsigned long pte_low; } pte_t;
 typedef struct { unsigned long pgprot; } pgprot_t;
 typedef struct { unsigned long pgd; } pgd_t;
 #define pte_val(x)	((x).pte_low)
 #define __pte(x)	((pte_t) { (x) } )
-#else
-typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)	((x).pte_low)
-#define __pte(x)	((pte_t) { (x) } )
 #endif
 
 #define pgd_val(x)	((x).pgd)
@@ -191,15 +183,4 @@ typedef struct page *pgtable_t;
  */
 #define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
 
-#ifdef CONFIG_SUPERH64
-/*
- * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
- * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is guaranteed by
- * virtue of L1_CACHE_BYTES, requiring this to only be special cased
- * for slab caches.
- */
-#define ARCH_SLAB_MINALIGN	8
-#endif
-
 #endif /* __ASM_SH_PAGE_H */

arch/sh/include/asm/pgtable.h

@@ -76,18 +76,10 @@ static inline unsigned long phys_addr_mask(void)
 #define PTE_PHYS_MASK		(phys_addr_mask() & PAGE_MASK)
 #define PTE_FLAGS_MASK		(~(PTE_PHYS_MASK) << PAGE_SHIFT)
 
-#ifdef CONFIG_SUPERH32
 #define VMALLOC_START	(P3SEG)
-#else
-#define VMALLOC_START	(0xf0000000)
-#endif
 #define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
 
-#if defined(CONFIG_SUPERH32)
 #include <asm/pgtable_32.h>
-#else
-#include <asm/pgtable_64.h>
-#endif
 
 /*
  * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
@@ -159,15 +151,6 @@ static inline bool pte_access_permitted(pte_t pte, bool write)
 		prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE);
 	return __pte_access_permitted(pte, prot);
 }
-#elif defined(CONFIG_SUPERH64)
-static inline bool pte_access_permitted(pte_t pte, bool write)
-{
-	u64 prot = _PAGE_PRESENT | _PAGE_USER | _PAGE_READ;
-
-	if (write)
-		prot |= _PAGE_WRITE;
-	return __pte_access_permitted(pte, prot);
-}
 #else
 static inline bool pte_access_permitted(pte_t pte, bool write)
 {

arch/sh/include/asm/pgtable_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PGTABLE_64_H
-#define __ASM_SH_PGTABLE_64_H
-
-/*
- * include/asm-sh/pgtable_64.h
- *
- * This file contains the functions and defines necessary to modify and use
- * the SuperH page table tree.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- * Copyright (C) 2003, 2004  Richard Curnow
- */
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/*
- * Error outputs.
- */
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Table setting routines. Used within arch/mm only.
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
-{
-	unsigned long long x = ((unsigned long long) pteval.pte_low);
-	unsigned long long *xp = (unsigned long long *) pteptr;
-	/*
-	 * Sign-extend based on NPHYS.
-	 */
-	*(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
-}
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * PGD defines. Top level.
- */
-
-/* To find an entry in a generic PGD. */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
-
-/* To find an entry in a kernel PGD. */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-#define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-/* #define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) */
-
-/*
- * PMD level access routines. Same notes as above.
- */
-#define _PMD_EMPTY		0x0
-/* Either the PMD is empty or present, it's not paged out */
-#define pmd_present(pmd_entry)	(pmd_val(pmd_entry) & _PAGE_PRESENT)
-#define pmd_clear(pmd_entry_p)	(set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
-#define pmd_none(pmd_entry)	(pmd_val((pmd_entry)) == _PMD_EMPTY)
-#define pmd_bad(pmd_entry)	((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pmd_page_vaddr(pmd_entry) \
-	((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
-
-#define pmd_page(pmd) \
-	(virt_to_page(pmd_val(pmd)))
-
-/* PMD to PTE dereferencing */
-#define pte_index(address) \
-		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-#define __pte_offset(address)	pte_index(address)
-
-#define pte_offset_kernel(dir, addr) \
-		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
-
-#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
-#define pte_unmap(pte)		do { } while (0)
-
-#ifndef __ASSEMBLY__
-/*
- * PTEL coherent flags.
- * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
- */
-/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
-   positions, to avoid expensive bit shuffling on every refill.  The remaining
-   bits are used for s/w purposes and masked out on each refill.
-
-   Note, the PTE slots are used to hold data of type swp_entry_t when a page is
-   swapped out.  Only the _PAGE_PRESENT flag is significant when the page is
-   swapped out, and it must be placed so that it doesn't overlap either the
-   type or offset fields of swp_entry_t.  For x86, offset is at [31:8] and type
-   at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t.  This
-   scheme doesn't map to SH-5 because bit [0] controls cacheability.  So bit
-   [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
-   into 2 pieces.  That is handled by SWP_ENTRY and SWP_TYPE below. */
-#define _PAGE_WT	0x001  /* CB0: if cacheable, 1->write-thru, 0->write-back */
-#define _PAGE_DEVICE	0x001  /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
-#define _PAGE_CACHABLE	0x002  /* CB1: uncachable/cachable */
-#define _PAGE_PRESENT	0x004  /* software: page referenced */
-#define _PAGE_SIZE0	0x008  /* SZ0-bit : size of page */
-#define _PAGE_SIZE1	0x010  /* SZ1-bit : size of page */
-#define _PAGE_SHARED	0x020  /* software: reflects PTEH's SH */
-#define _PAGE_READ	0x040  /* PR0-bit : read access allowed */
-#define _PAGE_EXECUTE	0x080  /* PR1-bit : execute access allowed */
-#define _PAGE_WRITE	0x100  /* PR2-bit : write access allowed */
-#define _PAGE_USER	0x200  /* PR3-bit : user space access allowed */
-#define _PAGE_DIRTY	0x400  /* software: page accessed in write */
-#define _PAGE_ACCESSED	0x800  /* software: page referenced */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
-
-/*
- * We can use the sign-extended bits in the PTEL to get 32 bits of
- * software flags. This works for now because no implementations uses
- * anything above the PPN field.
- */
-#define _PAGE_WIRED	_PAGE_EXT(0x001) /* software: wire the tlb entry */
-#define _PAGE_SPECIAL	_PAGE_EXT(0x002)
-
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PRESENT | _PAGE_SHARED | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_WIRED)
-
-/* Mask which drops software flags */
-#define _PAGE_FLAGS_HARDWARE_MASK	(NEFF_MASK & ~(_PAGE_CLEAR_FLAGS))
-
-/*
- * HugeTLB support
- */
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define _PAGE_SZHUGE	(_PAGE_SIZE0)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define _PAGE_SZHUGE	(_PAGE_SIZE1)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define _PAGE_SZHUGE	(_PAGE_SIZE0 | _PAGE_SIZE1)
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE	(0)
-#endif
-
-/*
- * Default flags for a Kernel page.
- * This is fundametally also SHARED because the main use of this define
- * (other than for PGD/PMD entries) is for the VMALLOC pool which is
- * contextless.
- *
- * _PAGE_EXECUTE is required for modules
- *
- */
-#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
-			 _PAGE_EXECUTE | \
-			 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
-			 _PAGE_SHARED)
-
-/* Default flags for a User page */
-#define _PAGE_TABLE	(_KERNPG_TABLE | _PAGE_USER)
-
-#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
-			 _PAGE_SPECIAL)
-
-/*
- * We have full permissions (Read/Write/Execute/Shared).
- */
-#define _PAGE_COMMON	(_PAGE_PRESENT | _PAGE_USER | \
-			 _PAGE_CACHABLE | _PAGE_ACCESSED)
-
-#define PAGE_NONE	__pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
-#define PAGE_SHARED	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \
-				 _PAGE_SHARED)
-#define PAGE_EXECREAD	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE)
-
-/*
- * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
- * protection mode for the stack.
- */
-#define PAGE_COPY	PAGE_EXECREAD
-
-#define PAGE_READONLY	__pgprot(_PAGE_COMMON | _PAGE_READ)
-#define PAGE_WRITEONLY	__pgprot(_PAGE_COMMON | _PAGE_WRITE)
-#define PAGE_RWX	__pgprot(_PAGE_COMMON | _PAGE_READ | \
-				 _PAGE_WRITE | _PAGE_EXECUTE)
-#define PAGE_KERNEL	__pgprot(_KERNPG_TABLE)
-
-#define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
-				 _PAGE_EXECUTE | _PAGE_ACCESSED | \
-				 _PAGE_DIRTY | _PAGE_SHARED)
-
-/* Make it a device mapping for maximum safety (e.g. for mapping device
-   registers into user-space via /dev/map).  */
-#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-/*
- * PTE level access routines.
- *
- * Note1:
- * It's the tree walk leaf. This is physical address to be stored.
- *
- * Note 2:
- * Regarding the choice of _PTE_EMPTY:
-
-   We must choose a bit pattern that cannot be valid, whether or not the page
-   is present.  bit[2]==1 => present, bit[2]==0 => swapped out.  If swapped
-   out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
-   left for us to select.  If we force bit[7]==0 when swapped out, we could use
-   the combination bit[7,2]=2'b10 to indicate an empty PTE.  Alternatively, if
-   we force bit[7]==1 when swapped out, we can use all zeroes to indicate
-   empty.  This is convenient, because the page tables get cleared to zero
-   when they are allocated.
-
- */
-#define _PTE_EMPTY	0x0
-#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,xp)	(set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
-#define pte_none(x)	(pte_val(x) == _PTE_EMPTY)
-
-/*
- * Some definitions to translate between mem_map, PTEs, and page
- * addresses:
- */
-
-/*
- * Given a PTE, return the index of the mem_map[] entry corresponding
- * to the page frame the PTE. Get the absolute physical address, make
- * a relative physical address and translate it to an index.
- */
-#define pte_pagenr(x)		(((unsigned long) (pte_val(x)) - \
-				 __MEMORY_START) >> PAGE_SHIFT)
-
-/*
- * Given a PTE, return the "struct page *".
- */
-#define pte_page(x)		(mem_map + pte_pagenr(x))
-
-/*
- * Return number of (down rounded) MB corresponding to x pages.
- */
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
-
-/*
- * The following have defined behavior only work if pte_present() is true.
- */
-static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_write(pte_t pte)  { return pte_val(pte) & _PAGE_WRITE; }
-static inline int pte_special(pte_t pte){ return pte_val(pte) & _PAGE_SPECIAL; }
-
-static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
-static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
-static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkhuge(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
-static inline pte_t pte_mkspecial(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SPECIAL)); return pte; }
-
-/*
- * Conversion functions: convert a page and protection to a page entry.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page,pgprot)							\
-({										\
-	pte_t __pte;								\
-										\
-	set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | 		\
-		__MEMORY_START | pgprot_val((pgprot))));			\
-	__pte;									\
-})
-
-/*
- * This takes a (absolute) physical page address that is used
- * by the remapping functions
- */
-#define mk_pte_phys(physpage, pgprot) \
-({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
-
-/* Encode and decode a swap entry */
-#define __swp_type(x)			(((x).val & 3) + (((x).val >> 1) & 0x3c))
-#define __swp_offset(x)			((x).val >> 8)
-#define __swp_entry(type, offset)	((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-#endif /* !__ASSEMBLY__ */
-
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#endif /* __ASM_SH_PGTABLE_64_H */

arch/sh/include/asm/posix_types.h

 /* SPDX-License-Identifier: GPL-2.0 */
-# ifdef CONFIG_SUPERH32
-#  include <asm/posix_types_32.h>
-# else
-#  include <asm/posix_types_64.h>
-# endif
+#include <asm/posix_types_32.h>

arch/sh/include/asm/processor.h

@@ -39,9 +39,6 @@ enum cpu_type {
 	/* SH4AL-DSP types */
 	CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372,
 
-	/* SH-5 types */
-        CPU_SH5_101, CPU_SH5_103,
-
 	/* Unknown subtype */
 	CPU_SH_NONE
 };
@@ -53,7 +50,6 @@ enum cpu_family {
 	CPU_FAMILY_SH4,
 	CPU_FAMILY_SH4A,
 	CPU_FAMILY_SH4AL_DSP,
-	CPU_FAMILY_SH5,
 	CPU_FAMILY_UNKNOWN,
 };
 
@@ -167,18 +163,12 @@ int vsyscall_init(void);
  */
 #ifdef CONFIG_CPU_SH2A
 extern unsigned int instruction_size(unsigned int insn);
-#elif defined(CONFIG_SUPERH32)
-#define instruction_size(insn)	(2)
 #else
-#define instruction_size(insn)	(4)
+#define instruction_size(insn)	(2)
 #endif
 
 #endif /* __ASSEMBLY__ */
 
-#ifdef CONFIG_SUPERH32
-# include <asm/processor_32.h>
-#else
-# include <asm/processor_64.h>
-#endif
+#include <asm/processor_32.h>
 
 #endif /* __ASM_SH_PROCESSOR_H */

arch/sh/include/asm/processor_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PROCESSOR_64_H
-#define __ASM_SH_PROCESSOR_64_H
-
-/*
- * include/asm-sh/processor_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <cpu/registers.h>
-
-#endif
-
-/*
- * User space process size: 2GB - 4k.
- */
-#define TASK_SIZE	0x7ffff000UL
-
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- *
- * STEP-bit:
- *     Single step bit
- *
- */
-#if defined(CONFIG_SH64_SR_WATCH)
-#define SR_MMU   0x84000000
-#else
-#define SR_MMU   0x80000000
-#endif
-
-#define SR_IMASK 0x000000f0
-#define SR_FD    0x00008000
-#define SR_SSTEP 0x08000000
-
-#ifndef __ASSEMBLY__
-
-/*
- * FPU structure and data : require 8-byte alignment as we need to access it
-   with fld.p, fst.p
- */
-
-struct sh_fpu_hard_struct {
-	unsigned long fp_regs[64];
-	unsigned int fpscr;
-	/* long status; * software status information */
-};
-
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-	unsigned long fp_regs[64];
-	unsigned int fpscr;
-	unsigned char lookahead;
-	unsigned long entry_pc;
-};
-
-union thread_xstate {
-	struct sh_fpu_hard_struct hardfpu;
-	struct sh_fpu_soft_struct softfpu;
-	/*
-	 * The structure definitions only produce 32 bit alignment, yet we need
-	 * to access them using 64 bit load/store as well.
-	 */
-	unsigned long long alignment_dummy;
-};
-
-struct thread_struct {
-	unsigned long sp;
-	unsigned long pc;
-
-	/* Various thread flags, see SH_THREAD_xxx */
-	unsigned long flags;
-
-	/* This stores the address of the pt_regs built during a context
-	   switch, or of the register save area built for a kernel mode
-	   exception.  It is used for backtracing the stack of a sleeping task
-	   or one that traps in kernel mode. */
-        struct pt_regs *kregs;
-	/* This stores the address of the pt_regs constructed on entry from
-	   user mode.  It is a fixed value over the lifetime of a process, or
-	   NULL for a kernel thread. */
-	struct pt_regs *uregs;
-
-	unsigned long address;
-	/* Hardware debugging registers may come here */
-
-	/* floating point info */
-	union thread_xstate *xstate;
-
-	/*
-	 * fpu_counter contains the number of consecutive context switches
-	 * that the FPU is used. If this is over a threshold, the lazy fpu
-	 * saving becomes unlazy to save the trap. This is an unsigned char
-	 * so that after 256 times the counter wraps and the behavior turns
-	 * lazy again; this to deal with bursty apps that only use FPU for
-	 * a short time
-	 */
-	unsigned char fpu_counter;
-};
-
-#define INIT_MMAP \
-{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
-
-#define INIT_THREAD  {				\
-	.sp		= sizeof(init_stack) +	\
-			  (long) &init_stack,	\
-	.pc		= 0,			\
-        .kregs		= &fake_swapper_regs,	\
-	.uregs	        = NULL,			\
-	.address	= 0,			\
-	.flags		= 0,			\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define SR_USER (SR_MMU | SR_FD)
-
-#define start_thread(_regs, new_pc, new_sp)			\
-	_regs->sr = SR_USER;	/* User mode. */		\
-	_regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
-	_regs->pc |= 1;		/* Set SHmedia ! */		\
-	_regs->regs[18] = 0;					\
-	_regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/*
- * FPU lazy state save handling.
- */
-
-static inline void disable_fpu(void)
-{
-	unsigned long long __dummy;
-
-	/* Set FD flag in SR */
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy)
-			     : "r" (SR_FD));
-}
-
-static inline void enable_fpu(void)
-{
-	unsigned long long __dummy;
-
-	/* Clear out FD flag in SR */
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy)
-			     : "r" (~SR_FD));
-}
-
-/* Round to nearest, no exceptions on inexact, overflow, underflow,
-   zero-divide, invalid.  Configure option for whether to flush denorms to
-   zero, or except if a denorm is encountered.  */
-#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
-#define FPSCR_INIT  0x00040000
-#else
-#define FPSCR_INIT  0x00000000
-#endif
-
-#ifdef CONFIG_SH_FPU
-/* Initialise the FP state of a task */
-void fpinit(struct sh_fpu_hard_struct *fpregs);
-#else
-#define fpinit(fpregs)	do { } while (0)
-#endif
-
-extern struct task_struct *last_task_used_math;
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
-
-#endif	/* __ASSEMBLY__ */
-#endif /* __ASM_SH_PROCESSOR_64_H */

arch/sh/include/asm/ptrace_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_PTRACE_64_H
-#define __ASM_SH_PTRACE_64_H
-
-#include <uapi/asm/ptrace_64.h>
-
-
-#define MAX_REG_OFFSET		offsetof(struct pt_regs, tregs[7])
-static inline long regs_return_value(struct pt_regs *regs)
-{
-	return regs->regs[3];
-}
-
-#endif /* __ASM_SH_PTRACE_64_H */

arch/sh/include/asm/string.h

 /* SPDX-License-Identifier: GPL-2.0 */
-#ifdef CONFIG_SUPERH32
-# include <asm/string_32.h>
-#else
-# include <asm/string_64.h>
-#endif
+#include <asm/string_32.h>

arch/sh/include/asm/string_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_STRING_64_H
-#define __ASM_SH_STRING_64_H
-
-#ifdef __KERNEL__
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *dest, const void *src, size_t count);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-
-#define __HAVE_ARCH_STRCPY
-extern char *strcpy(char *__dest, const char *__src);
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_STRING_64_H */

arch/sh/include/asm/switch_to.h

@@ -4,13 +4,4 @@
  * Copyright (C) 2003  Paul Mundt
  * Copyright (C) 2004  Richard Curnow
  */
-#ifndef __ASM_SH_SWITCH_TO_H
-#define __ASM_SH_SWITCH_TO_H
-
-#ifdef CONFIG_SUPERH32
-# include <asm/switch_to_32.h>
-#else
-# include <asm/switch_to_64.h>
-#endif
-
-#endif /* __ASM_SH_SWITCH_TO_H */
+#include <asm/switch_to_32.h>

arch/sh/include/asm/switch_to_64.h

-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#ifndef __ASM_SH_SWITCH_TO_64_H
-#define __ASM_SH_SWITCH_TO_64_H
-
-struct thread_struct;
-struct task_struct;
-
-/*
- *	switch_to() should switch tasks to task nr n, first
- */
-struct task_struct *sh64_switch_to(struct task_struct *prev,
-				   struct thread_struct *prev_thread,
-				   struct task_struct *next,
-				   struct thread_struct *next_thread);
-
-#define switch_to(prev,next,last)				\
-do {								\
-	if (last_task_used_math != next) {			\
-		struct pt_regs *regs = next->thread.uregs;	\
-		if (regs) regs->sr |= SR_FD;			\
-	}							\
-	last = sh64_switch_to(prev, &prev->thread, next,	\
-			      &next->thread);			\
-} while (0)
-
-
-#endif /* __ASM_SH_SWITCH_TO_64_H */

arch/sh/include/asm/syscall.h

@@ -4,10 +4,6 @@
 
 extern const unsigned long sys_call_table[];
 
-#ifdef CONFIG_SUPERH32
-# include <asm/syscall_32.h>
-#else
-# include <asm/syscall_64.h>
-#endif
+#include <asm/syscall_32.h>
 
 #endif /* __ASM_SH_SYSCALL_H */

arch/sh/include/asm/syscall_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALL_64_H
-#define __ASM_SH_SYSCALL_64_H
-
-#include <uapi/linux/audit.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-
-/* The system call number is given by the user in R9 */
-static inline long syscall_get_nr(struct task_struct *task,
-				  struct pt_regs *regs)
-{
-	return (regs->syscall_nr >= 0) ? regs->regs[9] : -1L;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
-				    struct pt_regs *regs)
-{
-	/*
-	 * XXX: This needs some thought. On SH we don't
-	 * save away the original R9 value anywhere.
-	 */
-}
-
-static inline long syscall_get_error(struct task_struct *task,
-				     struct pt_regs *regs)
-{
-	return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
-					    struct pt_regs *regs)
-{
-	return regs->regs[9];
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
-					    struct pt_regs *regs,
-					    int error, long val)
-{
-	if (error)
-		regs->regs[9] = -error;
-	else
-		regs->regs[9] = val;
-}
-
-static inline void syscall_get_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 unsigned long *args)
-{
-	memcpy(args, &regs->regs[2], 6 * sizeof(args[0]));
-}
-
-static inline void syscall_set_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 const unsigned long *args)
-{
-	memcpy(&regs->regs[2], args, 6 * sizeof(args[0]));
-}
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
-	int arch = AUDIT_ARCH_SH;
-
-#ifdef CONFIG_64BIT
-	arch |= __AUDIT_ARCH_64BIT;
-#endif
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	arch |= __AUDIT_ARCH_LE;
-#endif
-
-	return arch;
-}
-#endif /* __ASM_SH_SYSCALL_64_H */

arch/sh/include/asm/syscalls.h

@@ -2,8 +2,6 @@
 #ifndef __ASM_SH_SYSCALLS_H
 #define __ASM_SH_SYSCALLS_H
 
-#ifdef __KERNEL__
-
 asmlinkage int old_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			int fd, unsigned long off);
@@ -11,11 +9,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff);
 
-#ifdef CONFIG_SUPERH32
-# include <asm/syscalls_32.h>
-#else
-# include <asm/syscalls_64.h>
-#endif
+#include <asm/syscalls_32.h>
 
-#endif /* __KERNEL__ */
 #endif /* __ASM_SH_SYSCALLS_H */

arch/sh/include/asm/syscalls_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SYSCALLS_64_H
-#define __ASM_SH_SYSCALLS_64_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-
-struct pt_regs;
-
-/* Misc syscall related bits */
-asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs);
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_SYSCALLS_64_H */

arch/sh/include/asm/thread_info.h

@@ -70,9 +70,7 @@ register unsigned long current_stack_pointer asm("r15") __used;
 static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
-#if defined(CONFIG_SUPERH64)
-	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
-#elif defined(CONFIG_CPU_HAS_SR_RB)
+#if defined(CONFIG_CPU_HAS_SR_RB)
 	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
 #else
 	unsigned long __dummy;

arch/sh/include/asm/tlb.h

@@ -2,10 +2,6 @@
 #ifndef __ASM_SH_TLB_H
 #define __ASM_SH_TLB_H
 
-#ifdef CONFIG_SUPERH64
-# include <asm/tlb_64.h>
-#endif
-
 #ifndef __ASSEMBLY__
 #include <linux/pagemap.h>
 
@@ -14,7 +10,7 @@
 
 #include <asm-generic/tlb.h>
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64)
+#if defined(CONFIG_CPU_SH4)
 extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
 extern void tlb_unwire_entry(void);
 #else

arch/sh/include/asm/tlb_64.h

-/* SPDX-License-Identifier: GPL-2.0
- *
- * include/asm-sh/tlb_64.h
- *
- * Copyright (C) 2003  Paul Mundt
- */
-#ifndef __ASM_SH_TLB_64_H
-#define __ASM_SH_TLB_64_H
-
-/* ITLB defines */
-#define ITLB_FIXED	0x00000000	/* First fixed ITLB, see head.S */
-#define ITLB_LAST_VAR_UNRESTRICTED	0x000003F0	/* Last ITLB */
-
-/* DTLB defines */
-#define DTLB_FIXED	0x00800000	/* First fixed DTLB, see head.S */
-#define DTLB_LAST_VAR_UNRESTRICTED	0x008003F0	/* Last DTLB */
-
-#ifndef __ASSEMBLY__
-
-/**
- * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
- *
- * @tlb:	TLB entry
- */
-#define for_each_dtlb_entry(tlb)		\
-	for (tlb  = cpu_data->dtlb.first;	\
-	     tlb <= cpu_data->dtlb.last;	\
-	     tlb += cpu_data->dtlb.step)
-
-/**
- * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
- *
- * @tlb:	TLB entry
- */
-#define for_each_itlb_entry(tlb)		\
-	for (tlb  = cpu_data->itlb.first;	\
-	     tlb <= cpu_data->itlb.last;	\
-	     tlb += cpu_data->itlb.step)
-
-/**
- * __flush_tlb_slot - Flushes TLB slot @slot.
- *
- * @slot:	Address of TLB slot.
- */
-static inline void __flush_tlb_slot(unsigned long long slot)
-{
-	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
-}
-
-#ifdef CONFIG_MMU
-/* arch/sh64/mm/tlb.c */
-int sh64_tlb_init(void);
-unsigned long long sh64_next_free_dtlb_entry(void);
-unsigned long long sh64_get_wired_dtlb_entry(void);
-int sh64_put_wired_dtlb_entry(unsigned long long entry);
-void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
-			 unsigned long asid, unsigned long paddr);
-void sh64_teardown_tlb_slot(unsigned long long config_addr);
-#else
-#define sh64_tlb_init()					do { } while (0)
-#define sh64_next_free_dtlb_entry()			(0)
-#define sh64_get_wired_dtlb_entry()			(0)
-#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
-#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
-#define sh64_teardown_tlb_slot(addr)			do { } while (0)
-#endif /* CONFIG_MMU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_64_H */

arch/sh/include/asm/traps.h

@@ -4,11 +4,7 @@
 
 #include <linux/compiler.h>
 
-#ifdef CONFIG_SUPERH32
 # include <asm/traps_32.h>
-#else
-# include <asm/traps_64.h>
-#endif
 
 BUILD_TRAP_HANDLER(address_error);
 BUILD_TRAP_HANDLER(debug);

arch/sh/include/asm/traps_64.h

-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#ifndef __ASM_SH_TRAPS_64_H
-#define __ASM_SH_TRAPS_64_H
-
-#include <cpu/registers.h>
-
-extern void phys_stext(void);
-
-#define lookup_exception_vector()		\
-({						\
-	unsigned long _vec;			\
-						\
-	__asm__ __volatile__ (			\
-		"getcon " __EXPEVT ", %0\n\t"	\
-		: "=r" (_vec)			\
-	);					\
-						\
-	_vec;					\
-})
-
-static inline void trigger_address_error(void)
-{
-	phys_stext();
-}
-
-#define BUILD_TRAP_HANDLER(name)	\
-asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
-#define TRAP_HANDLER_DECL
-
-#endif /* __ASM_SH_TRAPS_64_H */

arch/sh/include/asm/types.h

@@ -9,13 +9,8 @@
  */
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_SUPERH32
 typedef u16 insn_size_t;
 typedef u32 reg_size_t;
-#else
-typedef u32 insn_size_t;
-typedef u64 reg_size_t;
-#endif
 
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_SH_TYPES_H */

arch/sh/include/asm/uaccess.h

@@ -96,11 +96,7 @@ struct __large_struct { unsigned long buf[100]; };
 	__pu_err;						\
 })
 
-#ifdef CONFIG_SUPERH32
 # include <asm/uaccess_32.h>
-#else
-# include <asm/uaccess_64.h>
-#endif
 
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 

arch/sh/include/asm/uaccess_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_UACCESS_64_H
-#define __ASM_SH_UACCESS_64_H
-
-/*
- * include/asm-sh/uaccess_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * User space memory access functions
- *
- * Copyright (C) 1999  Niibe Yutaka
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- */
-
-#define __get_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	x = 0;							\
-	switch (size) {						\
-	case 1:							\
-		retval = __get_user_asm_b((void *)&x,		\
-					  (long)ptr);		\
-		break;						\
-	case 2:							\
-		retval = __get_user_asm_w((void *)&x,		\
-					  (long)ptr);		\
-		break;						\
-	case 4:							\
-		retval = __get_user_asm_l((void *)&x,		\
-					  (long)ptr);		\
-		break;						\
-	case 8:							\
-		retval = __get_user_asm_q((void *)&x,		\
-					  (long)ptr);		\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-} while (0)
-
-extern long __get_user_asm_b(void *, long);
-extern long __get_user_asm_w(void *, long);
-extern long __get_user_asm_l(void *, long);
-extern long __get_user_asm_q(void *, long);
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		retval = __put_user_asm_b((void *)&x,		\
-					  (__force long)ptr);	\
-		break;						\
-	case 2:							\
-		retval = __put_user_asm_w((void *)&x,		\
-					  (__force long)ptr);	\
-		break;						\
-	case 4:							\
-		retval = __put_user_asm_l((void *)&x,		\
-					  (__force long)ptr);	\
-		break;						\
-	case 8:							\
-		retval = __put_user_asm_q((void *)&x,		\
-					  (__force long)ptr);	\
-		break;						\
-	default:						\
-		__put_user_unknown();				\
-	}							\
-} while (0)
-
-extern long __put_user_asm_b(void *, long);
-extern long __put_user_asm_w(void *, long);
-extern long __put_user_asm_l(void *, long);
-extern long __put_user_asm_q(void *, long);
-extern void __put_user_unknown(void);
-
-#endif /* __ASM_SH_UACCESS_64_H */

arch/sh/include/asm/unistd.h

 /* SPDX-License-Identifier: GPL-2.0 */
-# ifdef CONFIG_SUPERH32
-#  include <asm/unistd_32.h>
-# else
-#  include <asm/unistd_64.h>
-# endif
+#include <asm/unistd_32.h>
 
 #define NR_syscalls	__NR_syscalls
 

arch/sh/include/asm/user.h

@@ -28,19 +28,12 @@
  *	to write an integer number of pages.
  */
 
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-struct user_fpu_struct {
-	unsigned long fp_regs[32];
-	unsigned int fpscr;
-};
-#else
 struct user_fpu_struct {
 	unsigned long fp_regs[16];
 	unsigned long xfp_regs[16];
 	unsigned long fpscr;
 	unsigned long fpul;
 };
-#endif
 
 struct user {
 	struct pt_regs	regs;			/* entire machine state */

arch/sh/include/asm/vermagic.h

@@ -10,8 +10,6 @@
 #  define MODULE_PROC_FAMILY "SH3LE "
 # elif defined  CONFIG_CPU_SH4
 #  define MODULE_PROC_FAMILY "SH4LE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5LE "
 # else
 #  error unknown processor family
 # endif
@@ -22,8 +20,6 @@
 #  define MODULE_PROC_FAMILY "SH3BE "
 # elif defined  CONFIG_CPU_SH4
 #  define MODULE_PROC_FAMILY "SH4BE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5BE "
 # else
 #  error unknown processor family
 # endif

arch/sh/include/asm/vmlinux.lds.h

@@ -15,12 +15,4 @@
 #define DWARF_EH_FRAME
 #endif
 
-#ifdef CONFIG_SUPERH64
-#define EXTRA_TEXT		\
-	*(.text64)		\
-	*(.text..SHmedia32)
-#else
-#define EXTRA_TEXT
-#endif
-
 #endif /* __ASM_SH_VMLINUX_LDS_H */

arch/sh/include/cpu-sh5/cpu/addrspace.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
-#define __ASM_SH_CPU_SH5_ADDRSPACE_H
-
-#define	PHYS_PERIPHERAL_BLOCK	0x09000000
-#define PHYS_DMAC_BLOCK		0x0e000000
-#define PHYS_PCI_BLOCK		0x60000000
-#define PHYS_EMI_BLOCK		0xff000000
-
-/* No segmentation.. */
-
-#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */

arch/sh/include/cpu-sh5/cpu/cache.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_CACHE_H
-#define __ASM_SH_CPU_SH5_CACHE_H
-
-/*
- * include/asm-sh/cpu-sh5/cache.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- */
-
-#define L1_CACHE_SHIFT		5
-
-/* Valid and Dirty bits */
-#define SH_CACHE_VALID		(1LL<<0)
-#define SH_CACHE_UPDATED	(1LL<<57)
-
-/* Unimplemented compat bits.. */
-#define SH_CACHE_COMBINED	0
-#define SH_CACHE_ASSOC		0
-
-/* Cache flags */
-#define SH_CACHE_MODE_WT	(1LL<<0)
-#define SH_CACHE_MODE_WB	(1LL<<1)
-
-/*
- * Control Registers.
- */
-#define ICCR_BASE	0x01600000	/* Instruction Cache Control Register */
-#define ICCR_REG0	0		/* Register 0 offset */
-#define ICCR_REG1	1		/* Register 1 offset */
-#define ICCR0		ICCR_BASE+ICCR_REG0
-#define ICCR1		ICCR_BASE+ICCR_REG1
-
-#define ICCR0_OFF	0x0		/* Set ICACHE off */
-#define ICCR0_ON	0x1		/* Set ICACHE on */
-#define ICCR0_ICI	0x2		/* Invalidate all in IC */
-
-#define ICCR1_NOLOCK	0x0		/* Set No Locking */
-
-#define OCCR_BASE	0x01E00000	/* Operand Cache Control Register */
-#define OCCR_REG0	0		/* Register 0 offset */
-#define OCCR_REG1	1		/* Register 1 offset */
-#define OCCR0		OCCR_BASE+OCCR_REG0
-#define OCCR1		OCCR_BASE+OCCR_REG1
-
-#define OCCR0_OFF	0x0		/* Set OCACHE off */
-#define OCCR0_ON	0x1		/* Set OCACHE on */
-#define OCCR0_OCI	0x2		/* Invalidate all in OC */
-#define OCCR0_WT	0x4		/* Set OCACHE in WT Mode */
-#define OCCR0_WB	0x0		/* Set OCACHE in WB Mode */
-
-#define OCCR1_NOLOCK	0x0		/* Set No Locking */
-
-/*
- * SH-5
- * A bit of description here, for neff=32.
- *
- *                               |<--- tag  (19 bits) --->|
- * +-----------------------------+-----------------+------+----------+------+
- * |                             |                 | ways |set index |offset|
- * +-----------------------------+-----------------+------+----------+------+
- *                                ^                 2 bits   8 bits   5 bits
- *                                +- Bit 31
- *
- * Cacheline size is based on offset: 5 bits = 32 bytes per line
- * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
- * have a broader space for registers. These are outlined by
- * CACHE_?C_*_STEP below.
- *
- */
-
-/* Instruction cache */
-#define CACHE_IC_ADDRESS_ARRAY 0x01000000
-
-/* Operand Cache */
-#define CACHE_OC_ADDRESS_ARRAY 0x01800000
-
-/* These declarations relate to cache 'synonyms' in the operand cache.  A
-   'synonym' occurs where effective address bits overlap between those used for
-   indexing the cache sets and those passed to the MMU for translation.  In the
-   case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
-
-#define CACHE_OC_N_SYNBITS  1               /* Number of synonym bits */
-#define CACHE_OC_SYN_SHIFT  12
-/* Mask to select synonym bit(s) */
-#define CACHE_OC_SYN_MASK   (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
-
-/*
- * Instruction cache can't be invalidated based on physical addresses.
- * No Instruction Cache defines required, then.
- */
-
-#endif /* __ASM_SH_CPU_SH5_CACHE_H */

arch/sh/include/cpu-sh5/cpu/irq.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_IRQ_H
-#define __ASM_SH_CPU_SH5_IRQ_H
-
-/*
- * include/asm-sh/cpu-sh5/irq.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- */
-
-
-/*
- * Encoded IRQs are not considered worth to be supported.
- * Main reason is that there's no per-encoded-interrupt
- * enable/disable mechanism (as there was in SH3/4).
- * An all enabled/all disabled is worth only if there's
- * a cascaded IC to disable/enable/ack on. Until such
- * IC is available there's no such support.
- *
- * Presumably Encoded IRQs may use extra IRQs beyond 64,
- * below. Some logic must be added to cope with IRQ_IRL?
- * in an exclusive way.
- *
- * Priorities are set at Platform level, when IRQ_IRL0-3
- * are set to 0 Encoding is allowed. Otherwise it's not
- * allowed.
- */
-
-/* Independent IRQs */
-#define IRQ_IRL0	0
-#define IRQ_IRL1	1
-#define IRQ_IRL2	2
-#define IRQ_IRL3	3
-
-#define IRQ_INTA	4
-#define IRQ_INTB	5
-#define IRQ_INTC	6
-#define IRQ_INTD	7
-
-#define IRQ_SERR	12
-#define IRQ_ERR		13
-#define IRQ_PWR3	14
-#define IRQ_PWR2	15
-#define IRQ_PWR1	16
-#define IRQ_PWR0	17
-
-#define IRQ_DMTE0	18
-#define IRQ_DMTE1	19
-#define IRQ_DMTE2	20
-#define IRQ_DMTE3	21
-#define IRQ_DAERR	22
-
-#define IRQ_TUNI0	32
-#define IRQ_TUNI1	33
-#define IRQ_TUNI2	34
-#define IRQ_TICPI2	35
-
-#define IRQ_ATI		36
-#define IRQ_PRI		37
-#define IRQ_CUI		38
-
-#define IRQ_ERI		39
-#define IRQ_RXI		40
-#define IRQ_BRI		41
-#define IRQ_TXI		42
-
-#define IRQ_ITI		63
-
-#define NR_INTC_IRQS	64
-
-#ifdef CONFIG_SH_CAYMAN
-#define NR_EXT_IRQS     32
-#define START_EXT_IRQS  64
-
-/* PCI bus 2 uses encoded external interrupts on the Cayman board */
-#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
-#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
-#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
-#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
-
-#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
-#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
-
-#define IRQ_CFCARD	(START_EXT_IRQS + 7)
-#define IRQ_PCMCIA	(0)
-
-#else
-#define NR_EXT_IRQS	0
-#endif
-
-/* Default IRQs, fixed */
-#define TIMER_IRQ	IRQ_TUNI0
-#define RTC_IRQ		IRQ_CUI
-
-/* Default Priorities, Platform may choose differently */
-#define	NO_PRIORITY	0	/* Disabled */
-#define TIMER_PRIORITY	2
-#define RTC_PRIORITY	TIMER_PRIORITY
-#define SCIF_PRIORITY	3
-#define INTD_PRIORITY	3
-#define	IRL3_PRIORITY	4
-#define INTC_PRIORITY	6
-#define	IRL2_PRIORITY	7
-#define INTB_PRIORITY	9
-#define	IRL1_PRIORITY	10
-#define INTA_PRIORITY	12
-#define	IRL0_PRIORITY	13
-#define TOP_PRIORITY	15
-
-extern int intc_evt_to_irq[(0xE20/0x20)+1];
-extern int platform_int_priority[NR_INTC_IRQS];
-
-#endif /* __ASM_SH_CPU_SH5_IRQ_H */

arch/sh/include/cpu-sh5/cpu/mmu_context.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
-#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
-
-/* Common defines */
-#define TLB_STEP	0x00000010
-#define TLB_PTEH	0x00000000
-#define TLB_PTEL	0x00000008
-
-/* PTEH defines */
-#define PTEH_ASID_SHIFT	2
-#define PTEH_VALID	0x0000000000000001
-#define PTEH_SHARED	0x0000000000000002
-#define PTEH_MATCH_ASID	0x00000000000003ff
-
-#ifndef __ASSEMBLY__
-/* This has to be a common function because the next location to fill
- * information is shared. */
-extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */

arch/sh/include/cpu-sh5/cpu/registers.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
-#define __ASM_SH_CPU_SH5_REGISTERS_H
-
-/*
- * include/asm-sh/cpu-sh5/registers.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004  Richard Curnow
- */
-
-#ifdef __ASSEMBLY__
-/* =====================================================================
-**
-** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
-**	      Assigns symbolic names to control & target registers.
-*/
-
-/*
- * Define some useful aliases for control registers.
- */
-#define SR	cr0
-#define SSR	cr1
-#define PSSR	cr2
-			/* cr3 UNDEFINED */
-#define INTEVT	cr4
-#define EXPEVT	cr5
-#define PEXPEVT	cr6
-#define TRA	cr7
-#define SPC	cr8
-#define PSPC	cr9
-#define RESVEC	cr10
-#define VBR	cr11
-			/* cr12 UNDEFINED */
-#define TEA	cr13
-			/* cr14-cr15 UNDEFINED */
-#define DCR	cr16
-#define KCR0	cr17
-#define KCR1	cr18
-			/* cr19-cr31 UNDEFINED */
-			/* cr32-cr61 RESERVED */
-#define CTC	cr62
-#define USR	cr63
-
-/*
- * ABI dependent registers (general purpose set)
- */
-#define RET	r2
-#define ARG1	r2
-#define ARG2	r3
-#define ARG3	r4
-#define ARG4	r5
-#define ARG5	r6
-#define ARG6	r7
-#define SP	r15
-#define LINK	r18
-#define ZERO	r63
-
-/*
- * Status register defines: used only by assembly sources (and
- * 			    syntax independednt)
- */
-#define SR_RESET_VAL	0x0000000050008000
-#define SR_HARMLESS	0x00000000500080f0	/* Write ignores for most */
-#define SR_ENABLE_FPU	0xffffffffffff7fff	/* AND with this */
-
-#if defined (CONFIG_SH64_SR_WATCH)
-#define SR_ENABLE_MMU	0x0000000084000000	/* OR with this */
-#else
-#define SR_ENABLE_MMU	0x0000000080000000	/* OR with this */
-#endif
-
-#define SR_UNBLOCK_EXC	0xffffffffefffffff	/* AND with this */
-#define SR_BLOCK_EXC	0x0000000010000000	/* OR with this */
-
-#else	/* Not __ASSEMBLY__ syntax */
-
-/*
-** Stringify reg. name
-*/
-#define __str(x)  #x
-
-/* Stringify control register names for use in inline assembly */
-#define __SR __str(SR)
-#define __SSR __str(SSR)
-#define __PSSR __str(PSSR)
-#define __INTEVT __str(INTEVT)
-#define __EXPEVT __str(EXPEVT)
-#define __PEXPEVT __str(PEXPEVT)
-#define __TRA __str(TRA)
-#define __SPC __str(SPC)
-#define __PSPC __str(PSPC)
-#define __RESVEC __str(RESVEC)
-#define __VBR __str(VBR)
-#define __TEA __str(TEA)
-#define __DCR __str(DCR)
-#define __KCR0 __str(KCR0)
-#define __KCR1 __str(KCR1)
-#define __CTC __str(CTC)
-#define __USR __str(USR)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */

arch/sh/include/cpu-sh5/cpu/rtc.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_CPU_SH5_RTC_H
-#define __ASM_SH_CPU_SH5_RTC_H
-
-#define rtc_reg_size		sizeof(u32)
-#define RTC_BIT_INVERTED	0	/* The SH-5 RTC is surprisingly sane! */
-#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH5_RTC_H */

arch/sh/include/uapi/asm/posix_types.h

 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __KERNEL__
-# ifdef __SH5__
-#  include <asm/posix_types_64.h>
-# else
-#  include <asm/posix_types_32.h>
-# endif
-#endif /* __KERNEL__ */
+#include <asm/posix_types_32.h>

arch/sh/include/uapi/asm/posix_types_64.h

-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_POSIX_TYPES_64_H
-#define __ASM_SH_POSIX_TYPES_64_H
-
-typedef unsigned short	__kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-typedef unsigned short	__kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-typedef unsigned short	__kernel_uid_t;
-#define __kernel_uid_t __kernel_uid_t
-typedef unsigned short	__kernel_gid_t;
-#define __kernel_gid_t __kernel_gid_t
-typedef long unsigned int	__kernel_size_t;
-#define __kernel_size_t __kernel_size_t
-typedef int		__kernel_ssize_t;
-#define __kernel_ssize_t __kernel_ssize_t
-typedef int		__kernel_ptrdiff_t;
-#define __kernel_ptrdiff_t __kernel_ptrdiff_t
-
-typedef unsigned short	__kernel_old_uid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-typedef unsigned short	__kernel_old_gid_t;
-#define __kernel_old_gid_t __kernel_old_gid_t
-typedef unsigned short	__kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif /* __ASM_SH_POSIX_TYPES_64_H */

arch/sh/include/uapi/asm/ptrace.h

@@ -25,11 +25,6 @@
 #define PT_DATA_ADDR		248	/* &(struct user)->start_data */
 #define PT_TEXT_LEN		252
 
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-#include <asm/ptrace_64.h>
-#else
 #include <asm/ptrace_32.h>
-#endif
-
 
 #endif /* _UAPI__ASM_SH_PTRACE_H */

arch/sh/include/uapi/asm/ptrace_64.h

-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_SH_PTRACE_64_H
-#define _UAPI__ASM_SH_PTRACE_64_H
-
-struct pt_regs {
-	unsigned long long pc;
-	unsigned long long sr;
-	long long syscall_nr;
-	unsigned long long regs[63];
-	unsigned long long tregs[8];
-	unsigned long long pad[2];
-};
-
-
-#endif /* _UAPI__ASM_SH_PTRACE_64_H */

arch/sh/include/uapi/asm/sigcontext.h

@@ -5,18 +5,6 @@
 struct sigcontext {
 	unsigned long	oldmask;
 
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-	/* CPU registers */
-	unsigned long long sc_regs[63];
-	unsigned long long sc_tregs[8];
-	unsigned long long sc_pc;
-	unsigned long long sc_sr;
-
-	/* FPU registers */
-	unsigned long long sc_fpregs[32];
-	unsigned int sc_fpscr;
-	unsigned int sc_fpvalid;
-#else
 	/* CPU registers */
 	unsigned long sc_regs[16];
 	unsigned long sc_pc;
@@ -32,7 +20,6 @@ struct sigcontext {
 	unsigned int sc_fpscr;
 	unsigned int sc_fpul;
 	unsigned int sc_ownedfp;
-#endif
 };
 
 #endif /* __ASM_SH_SIGCONTEXT_H */

arch/sh/include/uapi/asm/stat.h

@@ -16,66 +16,6 @@ struct __old_kernel_stat {
 	unsigned long  st_ctime;
 };
 
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-struct stat {
-	unsigned short st_dev;
-	unsigned short __pad1;
-	unsigned long st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned short __pad2;
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned short	st_dev;
-	unsigned char	__pad0[10];
-
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned short	st_rdev;
-	unsigned char	__pad3[10];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
-	unsigned long	__pad4;		/* future possible st_blocks high bits */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
-
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-#else
 struct stat {
 	unsigned long  st_dev;
 	unsigned long  st_ino;
@@ -134,6 +74,5 @@ struct stat64 {
 };
 
 #define STAT_HAVE_NSEC 1
-#endif
 
 #endif /* __ASM_SH_STAT_H */

arch/sh/include/uapi/asm/swab.h

@@ -13,14 +13,9 @@
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__asm__(
-#ifdef __SH5__
-		"byterev	%1, %0\n\t"
-		"shari		%0, 32, %0"
-#else
 		"swap.b		%1, %0\n\t"
 		"swap.w		%0, %0\n\t"
 		"swap.b		%0, %0"
-#endif
 		: "=r" (x)
 		: "r" (x));
 
@@ -31,12 +26,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
 	__asm__(
-#ifdef __SH5__
-		"byterev	%1, %0\n\t"
-		"shari		%0, 32, %0"
-#else
 		"swap.b		%1, %0"
-#endif
 		: "=r" (x)
 		:  "r" (x));
 

arch/sh/include/uapi/asm/unistd.h

 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __KERNEL__
-# ifdef __SH5__
-#  include <asm/unistd_64.h>
-# else
-#  include <asm/unistd_32.h>
-# endif
-#endif
+#include <asm/unistd_32.h>

arch/sh/include/uapi/asm/unistd_64.h

-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ASM_SH_UNISTD_64_H
-#define __ASM_SH_UNISTD_64_H
-
-/*
- * include/asm-sh/unistd_64.h
- *
- * This file contains the system call numbers.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2004  Sean McGoogan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-				 /* 17 was sys_break */
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-				 /* 31 was sys_stty */
-				 /* 32 was sys_gtty */
-#define __NR_access		 33
-#define __NR_nice		 34
-				 /* 35 was sys_ftime */
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-				 /* 44 was sys_prof */
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-				 /* 53 was sys_lock */
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-				 /* 56 was sys_mpx */
-#define __NR_setpgid		 57
-				 /* 58 was sys_ulimit */
-				 /* 59 was sys_olduname */
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-				 /* 82 was sys_select */
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-				 /* 98 was sys_profil */
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-				/* 101 was sys_ioperm */
-#define __NR_socketcall		102	/* old implementation of socket systemcall */
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-				/* 110 was sys_iopl */
-#define __NR_vhangup		111
-				/* 112 was sys_idle */
-				/* 113 was sys_vm86old */
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-				/* 127 was sys_create_module */
-#define __NR_init_module	128
-#define __NR_delete_module	129
-				/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-				/* 137 was sys_afs_syscall */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-				/* 166 was sys_vm86 */
-				/* 167 was sys_query_module */
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-				/* 188 reserved for getpmsg */
-				/* 189 reserved for putpmsg */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-
-/* Non-multiplexed socket family */
-#define __NR_socket		220
-#define __NR_bind		221
-#define __NR_connect		222
-#define __NR_listen		223
-#define __NR_accept		224
-#define __NR_getsockname	225
-#define __NR_getpeername	226
-#define __NR_socketpair		227
-#define __NR_send		228
-#define __NR_sendto		229
-#define __NR_recv		230
-#define __NR_recvfrom		231
-#define __NR_shutdown		232
-#define __NR_setsockopt		233
-#define __NR_getsockopt		234
-#define __NR_sendmsg		235
-#define __NR_recvmsg		236
-
-/* Non-multiplexed IPC family */
-#define __NR_semop		237
-#define __NR_semget		238
-#define __NR_semctl		239
-#define __NR_msgsnd		240
-#define __NR_msgrcv		241
-#define __NR_msgget		242
-#define __NR_msgctl		243
-#define __NR_shmat		244
-#define __NR_shmdt		245
-#define __NR_shmget		246
-#define __NR_shmctl		247
-
-#define __NR_getdents64		248
-#define __NR_fcntl64		249
-				/* 250 is reserved for tux */
-				/* 251 is unused */
-#define __NR_gettid		252
-#define __NR_readahead		253
-#define __NR_setxattr		254
-#define __NR_lsetxattr		255
-#define __NR_fsetxattr		256
-#define __NR_getxattr		257
-#define __NR_lgetxattr		258
-#define __NR_fgetxattr		259
-#define __NR_listxattr		260
-#define __NR_llistxattr		261
-#define __NR_flistxattr		262
-#define __NR_removexattr	263
-#define __NR_lremovexattr	264
-#define __NR_fremovexattr	265
-#define __NR_tkill		266
-#define __NR_sendfile64		267
-#define __NR_futex		268
-#define __NR_sched_setaffinity	269
-#define __NR_sched_getaffinity	270
-				/* 271 is reserved for set_thread_area */
-				/* 272 is reserved for get_thread_area */
-#define __NR_io_setup		273
-#define __NR_io_destroy		274
-#define __NR_io_getevents	275
-#define __NR_io_submit		276
-#define __NR_io_cancel		277
-#define __NR_fadvise64		278
-				/* 279 is unused */
-#define __NR_exit_group		280
-
-#define __NR_lookup_dcookie	281
-#define __NR_epoll_create	282
-#define __NR_epoll_ctl		283
-#define __NR_epoll_wait		284
-#define __NR_remap_file_pages	285
-#define __NR_set_tid_address	286
-#define __NR_timer_create	287
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		296
-#define __NR_fstatfs64		297
-#define __NR_tgkill		298
-#define __NR_utimes		299
-#define __NR_fadvise64_64	300
-				/* 301 is reserved for vserver */
-				/* 302 is reserved for mbind */
-				/* 303 is reserved for get_mempolicy */
-				/* 304 is reserved for set_mempolicy */
-#define __NR_mq_open            305
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-				/* 311 is reserved for kexec */
-#define __NR_waitid		312
-#define __NR_add_key		313
-#define __NR_request_key	314
-#define __NR_keyctl		315
-#define __NR_ioprio_set		316
-#define __NR_ioprio_get		317
-#define __NR_inotify_init	318
-#define __NR_inotify_add_watch	319
-#define __NR_inotify_rm_watch	320
-				/* 321 is unused */
-#define __NR_migrate_pages	322
-#define __NR_openat		323
-#define __NR_mkdirat		324
-#define __NR_mknodat		325
-#define __NR_fchownat		326
-#define __NR_futimesat		327
-#define __NR_fstatat64		328
-#define __NR_unlinkat		329
-#define __NR_renameat		330
-#define __NR_linkat		331
-#define __NR_symlinkat		332
-#define __NR_readlinkat		333
-#define __NR_fchmodat		334
-#define __NR_faccessat		335
-#define __NR_pselect6		336
-#define __NR_ppoll		337
-#define __NR_unshare		338
-#define __NR_set_robust_list	339
-#define __NR_get_robust_list	340
-#define __NR_splice		341
-#define __NR_sync_file_range	342
-#define __NR_tee		343
-#define __NR_vmsplice		344
-#define __NR_move_pages		345
-#define __NR_getcpu		346
-#define __NR_epoll_pwait	347
-#define __NR_utimensat		348
-#define __NR_signalfd		349
-#define __NR_timerfd_create	350
-#define __NR_eventfd		351
-#define __NR_fallocate		352
-#define __NR_timerfd_settime	353
-#define __NR_timerfd_gettime	354
-#define __NR_signalfd4		355
-#define __NR_eventfd2		356
-#define __NR_epoll_create1	357
-#define __NR_dup3		358
-#define __NR_pipe2		359
-#define __NR_inotify_init1	360
-#define __NR_preadv		361
-#define __NR_pwritev		362
-#define __NR_rt_tgsigqueueinfo	363
-#define __NR_perf_event_open	364
-#define __NR_recvmmsg		365
-#define __NR_accept4		366
-#define __NR_fanotify_init	367
-#define __NR_fanotify_mark	368
-#define __NR_prlimit64		369
-#define __NR_name_to_handle_at	370
-#define __NR_open_by_handle_at	371
-#define __NR_clock_adjtime	372
-#define __NR_syncfs		373
-#define __NR_sendmmsg		374
-#define __NR_setns		375
-#define __NR_process_vm_readv	376
-#define __NR_process_vm_writev	377
-#define __NR_kcmp		378
-#define __NR_finit_module	379
-#define __NR_sched_getattr	380
-#define __NR_sched_setattr	381
-#define __NR_renameat2		382
-#define __NR_seccomp		383
-#define __NR_getrandom		384
-#define __NR_memfd_create	385
-#define __NR_bpf		386
-#define __NR_execveat		387
-#define __NR_userfaultfd	388
-#define __NR_membarrier		389
-#define __NR_mlock2		390
-#define __NR_copy_file_range	391
-#define __NR_preadv2		392
-#define __NR_pwritev2		393
-
-#ifdef __KERNEL__
-#define __NR_syscalls		394
-#endif
-
-#endif /* __ASM_SH_UNISTD_64_H */

arch/sh/kernel/Makefile

@@ -3,7 +3,7 @@
 # Makefile for the Linux/SuperH kernel.
 #
 
-extra-y	:= head_$(BITS).o vmlinux.lds
+extra-y	:= head_32.o vmlinux.lds
 
 ifdef CONFIG_FUNCTION_TRACER
 # Do not profile debug and lowlevel utilities
@@ -13,26 +13,26 @@ endif
 CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y	:= debugtraps.o dumpstack.o 		\
-	   idle.o io.o irq.o irq_$(BITS).o kdebugfs.o			\
+	   idle.o io.o irq.o irq_32.o kdebugfs.o			\
 	   machvec.o nmi_debug.o process.o				\
-	   process_$(BITS).o ptrace.o ptrace_$(BITS).o			\
+	   process_32.o ptrace.o ptrace_32.o				\
 	   reboot.o return_address.o					\
-	   setup.o signal_$(BITS).o sys_sh.o 				\
-	   syscalls_$(BITS).o time.o topology.o traps.o			\
-	   traps_$(BITS).o unwinder.o
+	   setup.o signal_32.o sys_sh.o 				\
+	   syscalls_32.o time.o topology.o traps.o			\
+	   traps_32.o unwinder.o
 
 ifndef CONFIG_GENERIC_IOMAP
 obj-y				+= iomap.o
 obj-$(CONFIG_HAS_IOPORT_MAP)	+= ioport.o
 endif
 
-obj-$(CONFIG_SUPERH32)		+= sys_sh32.o
+obj-y				+= sys_sh32.o
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
+obj-$(CONFIG_MODULES)		+= sh_ksyms_32.o module.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o

arch/sh/kernel/cpu/Makefile

@@ -7,7 +7,6 @@ obj-$(CONFIG_CPU_SH2)		= sh2/
 obj-$(CONFIG_CPU_SH2A)		= sh2a/
 obj-$(CONFIG_CPU_SH3)		= sh3/
 obj-$(CONFIG_CPU_SH4)		= sh4/
-obj-$(CONFIG_CPU_SH5)		= sh5/
 
 # Special cases for family ancestry.
 

arch/sh/kernel/cpu/init.c

@@ -103,7 +103,7 @@ void __attribute__ ((weak)) l2_cache_init(void)
 /*
  * Generic first-level cache init
  */
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2)
+#if !defined(CONFIG_CPU_J2)
 static void cache_init(void)
 {
 	unsigned long ccr, flags;

arch/sh/kernel/cpu/irq/Makefile

@@ -2,6 +2,5 @@
 #
 # Makefile for the Linux/SuperH CPU-specific IRQ handlers.
 #
-obj-$(CONFIG_SUPERH32)			+= imask.o
-obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o
+obj-y					+= imask.o
 obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o

arch/sh/kernel/cpu/irq/intc-sh5.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/irq/intc-sh5.c
- *
- * Interrupt Controller support for SH5 INTC.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- *
- * Per-interrupt selective. IRLM=0 (Fixed priority) is not
- * supported being useless without a cascaded interrupt
- * controller.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <cpu/irq.h>
-#include <asm/page.h>
-
-/*
- * Maybe the generic Peripheral block could move to a more
- * generic include file. INTC Block will be defined here
- * and only here to make INTC self-contained in a single
- * file.
- */
-#define	INTC_BLOCK_OFFSET	0x01000000
-
-/* Base */
-#define INTC_BASE		PHYS_PERIPHERAL_BLOCK + \
-				INTC_BLOCK_OFFSET
-
-/* Address */
-#define INTC_ICR_SET		(intc_virt + 0x0)
-#define INTC_ICR_CLEAR		(intc_virt + 0x8)
-#define INTC_INTPRI_0		(intc_virt + 0x10)
-#define INTC_INTSRC_0		(intc_virt + 0x50)
-#define INTC_INTSRC_1		(intc_virt + 0x58)
-#define INTC_INTREQ_0		(intc_virt + 0x60)
-#define INTC_INTREQ_1		(intc_virt + 0x68)
-#define INTC_INTENB_0		(intc_virt + 0x70)
-#define INTC_INTENB_1		(intc_virt + 0x78)
-#define INTC_INTDSB_0		(intc_virt + 0x80)
-#define INTC_INTDSB_1		(intc_virt + 0x88)
-
-#define INTC_ICR_IRLM		0x1
-#define	INTC_INTPRI_PREGS	8		/* 8 Priority Registers */
-#define	INTC_INTPRI_PPREG	8		/* 8 Priorities per Register */
-
-
-/*
- * Mapper between the vector ordinal and the IRQ number
- * passed to kernel/device drivers.
- */
-int intc_evt_to_irq[(0xE20/0x20)+1] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x000 - 0x0E0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x100 - 0x1E0 */
-	 0,  0,  0,  0,  0,  1,  0,  0,	/* 0x200 - 0x2E0 */
-	 2,  0,  0,  3,  0,  0,  0, -1,	/* 0x300 - 0x3E0 */
-	32, 33, 34, 35, 36, 37, 38, -1,	/* 0x400 - 0x4E0 */
-	-1, -1, -1, 63, -1, -1, -1, -1,	/* 0x500 - 0x5E0 */
-	-1, -1, 18, 19, 20, 21, 22, -1,	/* 0x600 - 0x6E0 */
-	39, 40, 41, 42, -1, -1, -1, -1,	/* 0x700 - 0x7E0 */
-	 4,  5,  6,  7, -1, -1, -1, -1,	/* 0x800 - 0x8E0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x900 - 0x9E0 */
-	12, 13, 14, 15, 16, 17, -1, -1,	/* 0xA00 - 0xAE0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xB00 - 0xBE0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xC00 - 0xCE0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xD00 - 0xDE0 */
-	-1, -1				/* 0xE00 - 0xE20 */
-};
-
-static unsigned long intc_virt;
-static int irlm;		/* IRL mode */
-
-static void enable_intc_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned long reg;
-	unsigned long bitmask;
-
-	if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
-		printk("Trying to use straight IRL0-3 with an encoding platform.\n");
-
-	if (irq < 32) {
-		reg = INTC_INTENB_0;
-		bitmask = 1 << irq;
-	} else {
-		reg = INTC_INTENB_1;
-		bitmask = 1 << (irq - 32);
-	}
-
-	__raw_writel(bitmask, reg);
-}
-
-static void disable_intc_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned long reg;
-	unsigned long bitmask;
-
-	if (irq < 32) {
-		reg = INTC_INTDSB_0;
-		bitmask = 1 << irq;
-	} else {
-		reg = INTC_INTDSB_1;
-		bitmask = 1 << (irq - 32);
-	}
-
-	__raw_writel(bitmask, reg);
-}
-
-static struct irq_chip intc_irq_type = {
-	.name = "INTC",
-	.irq_enable = enable_intc_irq,
-	.irq_disable = disable_intc_irq,
-};
-
-void __init plat_irq_setup(void)
-{
-	unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
-	unsigned long reg;
-	int i;
-
-	intc_virt = (unsigned long)ioremap(INTC_BASE, 1024);
-	if (!intc_virt) {
-		panic("Unable to remap INTC\n");
-	}
-
-
-	/* Set default: per-line enable/disable, priority driven ack/eoi */
-	for (i = 0; i < NR_INTC_IRQS; i++)
-		irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
-
-
-	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
-	__raw_writel(-1, INTC_INTDSB_0);
-	__raw_writel(-1, INTC_INTDSB_1);
-
-	for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
-		__raw_writel( NO_PRIORITY, reg);
-
-
-#ifdef CONFIG_SH_CAYMAN
-	{
-		unsigned long data;
-
-		/* Set IRLM */
-		/* If all the priorities are set to 'no priority', then
-		 * assume we are using encoded mode.
-		 */
-		irlm = platform_int_priority[IRQ_IRL0] +
-		       platform_int_priority[IRQ_IRL1] +
-		       platform_int_priority[IRQ_IRL2] +
-		       platform_int_priority[IRQ_IRL3];
-		if (irlm == NO_PRIORITY) {
-			/* IRLM = 0 */
-			reg = INTC_ICR_CLEAR;
-			i = IRQ_INTA;
-			printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
-		} else {
-			/* IRLM = 1 */
-			reg = INTC_ICR_SET;
-			i = IRQ_IRL0;
-		}
-		__raw_writel(INTC_ICR_IRLM, reg);
-
-		/* Set interrupt priorities according to platform description */
-		for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
-			data |= platform_int_priority[i] <<
-				((i % INTC_INTPRI_PPREG) * 4);
-			if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
-				/* Upon the 7th, set Priority Register */
-				__raw_writel(data, reg);
-				data = 0;
-				reg += 8;
-			}
-		}
-	}
-#endif
-
-	/*
-	 * And now let interrupts come in.
-	 * sti() is not enough, we need to
-	 * lower priority, too.
-	 */
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "and       %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy0)
-                             : "r" (__dummy1));
-}

arch/sh/kernel/cpu/proc.c

@@ -24,7 +24,6 @@ static const char *cpu_name[] = {
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
 	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
-	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
 	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
 	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
 	[CPU_SH7372]	= "SH7372",	[CPU_SH7734]	= "SH7734",

arch/sh/kernel/cpu/sh4a/setup-sh7786.c

@@ -391,6 +391,7 @@ static struct platform_device *sh7786_early_devices[] __initdata = {
 	&tmu0_device,
 	&tmu1_device,
 	&tmu2_device,
+	&tmu3_device,
 };
 
 static struct platform_device *sh7786_devices[] __initdata = {

arch/sh/kernel/cpu/sh5/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Linux/SuperH SH-5 backends.
-#
-obj-y := entry.o probe.o switchto.o
-
-obj-$(CONFIG_SH_FPU)		+= fpu.o
-obj-$(CONFIG_KALLSYMS)		+= unwind.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SH5)		+= setup-sh5.o
-
-# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SH5)		:= clock-sh5.o
-
-obj-y			+= $(clock-y)

arch/sh/kernel/cpu/sh5/clock-sh5.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/clock-sh5.c
- *
- * SH-5 support for the clock framework
- *
- *  Copyright (C) 2008  Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-
-static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
-
-/* Clock, Power and Reset Controller */
-#define	CPRC_BLOCK_OFF	0x01010000
-#define CPRC_BASE	(PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF)
-
-static unsigned long cprc_base;
-
-static void master_clk_init(struct clk *clk)
-{
-	int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007;
-	clk->rate *= ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_master_clk_ops = {
-	.init		= master_clk_init,
-};
-
-static unsigned long module_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readw(cprc_base) >> 12) & 0x0007;
-	return clk->parent->rate / ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_module_clk_ops = {
-	.recalc		= module_clk_recalc,
-};
-
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readw(cprc_base) >> 3) & 0x0007;
-	return clk->parent->rate / ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_bus_clk_ops = {
-	.recalc		= bus_clk_recalc,
-};
-
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readw(cprc_base) & 0x0007);
-	return clk->parent->rate / ifc_table[idx];
-}
-
-static struct sh_clk_ops sh5_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
-};
-
-static struct sh_clk_ops *sh5_clk_ops[] = {
-	&sh5_master_clk_ops,
-	&sh5_module_clk_ops,
-	&sh5_bus_clk_ops,
-	&sh5_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
-{
-	cprc_base = (unsigned long)ioremap(CPRC_BASE, 1024);
-	BUG_ON(!cprc_base);
-
-	if (idx < ARRAY_SIZE(sh5_clk_ops))
-		*ops = sh5_clk_ops[idx];
-}

arch/sh/kernel/cpu/sh5/entry.S

-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh5/entry.S
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2008  Paul Mundt
- * Copyright (C) 2003, 2004  Richard Curnow
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/sys.h>
-#include <cpu/registers.h>
-#include <asm/processor.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-/*
- * SR fields.
- */
-#define SR_ASID_MASK	0x00ff0000
-#define SR_FD_MASK	0x00008000
-#define SR_SS		0x08000000
-#define SR_BL		0x10000000
-#define SR_MD		0x40000000
-
-/*
- * Event code.
- */
-#define	EVENT_INTERRUPT		0
-#define	EVENT_FAULT_TLB		1
-#define	EVENT_FAULT_NOT_TLB	2
-#define	EVENT_DEBUG		3
-
-/* EXPEVT values */
-#define	RESET_CAUSE		0x20
-#define DEBUGSS_CAUSE		0x980
-
-/*
- * Frame layout. Quad index.
- */
-#define	FRAME_T(x)	FRAME_TBASE+(x*8)
-#define	FRAME_R(x)	FRAME_RBASE+(x*8)
-#define	FRAME_S(x)	FRAME_SBASE+(x*8)
-#define FSPC		0
-#define FSSR		1
-#define FSYSCALL_ID	2
-
-/* Arrange the save frame to be a multiple of 32 bytes long */
-#define FRAME_SBASE	0
-#define FRAME_RBASE	(FRAME_SBASE+(3*8))	/* SYSCALL_ID - SSR - SPC */
-#define FRAME_TBASE	(FRAME_RBASE+(63*8))	/* r0 - r62 */
-#define FRAME_PBASE	(FRAME_TBASE+(8*8))	/* tr0 -tr7 */
-#define	FRAME_SIZE	(FRAME_PBASE+(2*8))	/* pad0-pad1 */
-
-#define FP_FRAME_SIZE	FP_FRAME_BASE+(33*8)	/* dr0 - dr31 + fpscr */
-#define FP_FRAME_BASE	0
-
-#define	SAVED_R2	0*8
-#define	SAVED_R3	1*8
-#define	SAVED_R4	2*8
-#define	SAVED_R5	3*8
-#define	SAVED_R18	4*8
-#define	SAVED_R6	5*8
-#define	SAVED_TR0	6*8
-
-/* These are the registers saved in the TLB path that aren't saved in the first
-   level of the normal one. */
-#define	TLB_SAVED_R25	7*8
-#define	TLB_SAVED_TR1	8*8
-#define	TLB_SAVED_TR2	9*8
-#define	TLB_SAVED_TR3	10*8
-#define	TLB_SAVED_TR4	11*8
-/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
-   breakage otherwise. */
-#define	TLB_SAVED_R0	12*8
-#define	TLB_SAVED_R1	13*8
-
-#define CLI()				\
-	getcon	SR, r6;			\
-	ori	r6, 0xf0, r6;		\
-	putcon	r6, SR;
-
-#define STI()				\
-	getcon	SR, r6;			\
-	andi	r6, ~0xf0, r6;		\
-	putcon	r6, SR;
-
-#ifdef CONFIG_PREEMPTION
-#  define preempt_stop()	CLI()
-#else
-#  define preempt_stop()
-#  define resume_kernel		restore_all
-#endif
-
-	.section	.data, "aw"
-
-#define FAST_TLBMISS_STACK_CACHELINES 4
-#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
-
-/* Register back-up area for all exceptions */
-	.balign	32
-	/* Allow for 16 quadwords to be pushed by fast tlbmiss handling
-	 * register saves etc. */
-	.fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
-/* This is 32 byte aligned by construction */
-/* Register back-up area for all exceptions */
-reg_save_area:
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-
-	.quad	0
-	.quad   0
-
-/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
- * reentrancy. Note this area may be accessed via physical address.
- * Align so this fits a whole single cache line, for ease of purging.
- */
-	.balign 32,0,32
-resvec_save_area:
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-	.balign 32,0,32
-
-/* Jump table of 3rd level handlers  */
-trap_jtable:
-	.long	do_exception_error		/* 0x000 */
-	.long	do_exception_error		/* 0x020 */
-#ifdef CONFIG_MMU
-	.long	tlb_miss_load				/* 0x040 */
-	.long	tlb_miss_store				/* 0x060 */
-#else
-	.long	do_exception_error
-	.long	do_exception_error
-#endif
-	! ARTIFICIAL pseudo-EXPEVT setting
-	.long	do_debug_interrupt		/* 0x080 */
-#ifdef CONFIG_MMU
-	.long	tlb_miss_load				/* 0x0A0 */
-	.long	tlb_miss_store				/* 0x0C0 */
-#else
-	.long	do_exception_error
-	.long	do_exception_error
-#endif
-	.long	do_address_error_load	/* 0x0E0 */
-	.long	do_address_error_store	/* 0x100 */
-#ifdef CONFIG_SH_FPU
-	.long	do_fpu_error		/* 0x120 */
-#else
-	.long	do_exception_error		/* 0x120 */
-#endif
-	.long	do_exception_error		/* 0x140 */
-	.long	system_call				/* 0x160 */
-	.long	do_reserved_inst		/* 0x180 */
-	.long	do_illegal_slot_inst	/* 0x1A0 */
-	.long	do_exception_error		/* 0x1C0 - NMI */
-	.long	do_exception_error		/* 0x1E0 */
-	.rept 15
-		.long do_IRQ		/* 0x200 - 0x3C0 */
-	.endr
-	.long	do_exception_error		/* 0x3E0 */
-	.rept 32
-		.long do_IRQ		/* 0x400 - 0x7E0 */
-	.endr
-	.long	fpu_error_or_IRQA			/* 0x800 */
-	.long	fpu_error_or_IRQB			/* 0x820 */
-	.long	do_IRQ			/* 0x840 */
-	.long	do_IRQ			/* 0x860 */
-	.rept 6
-		.long do_exception_error	/* 0x880 - 0x920 */
-	.endr
-	.long	breakpoint_trap_handler	/* 0x940 */
-	.long	do_exception_error		/* 0x960 */
-	.long	do_single_step		/* 0x980 */
-
-	.rept 3
-		.long do_exception_error	/* 0x9A0 - 0x9E0 */
-	.endr
-	.long	do_IRQ			/* 0xA00 */
-	.long	do_IRQ			/* 0xA20 */
-#ifdef CONFIG_MMU
-	.long	itlb_miss_or_IRQ			/* 0xA40 */
-#else
-	.long	do_IRQ
-#endif
-	.long	do_IRQ			/* 0xA60 */
-	.long	do_IRQ			/* 0xA80 */
-#ifdef CONFIG_MMU
-	.long	itlb_miss_or_IRQ			/* 0xAA0 */
-#else
-	.long	do_IRQ
-#endif
-	.long	do_exception_error		/* 0xAC0 */
-	.long	do_address_error_exec	/* 0xAE0 */
-	.rept 8
-		.long do_exception_error	/* 0xB00 - 0xBE0 */
-	.endr
-	.rept 18
-		.long do_IRQ		/* 0xC00 - 0xE20 */
-	.endr
-
-	.section	.text64, "ax"
-
-/*
- * --- Exception/Interrupt/Event Handling Section
- */
-
-/*
- * VBR and RESVEC blocks.
- *
- * First level handler for VBR-based exceptions.
- *
- * To avoid waste of space, align to the maximum text block size.
- * This is assumed to be at most 128 bytes or 32 instructions.
- * DO NOT EXCEED 32 instructions on the first level handlers !
- *
- * Also note that RESVEC is contained within the VBR block
- * where the room left (1KB - TEXT_SIZE) allows placing
- * the RESVEC block (at most 512B + TEXT_SIZE).
- *
- * So first (and only) level handler for RESVEC-based exceptions.
- *
- * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
- * and interrupt) we are a lot tight with register space until
- * saving onto the stack frame, which is done in handle_exception().
- *
- */
-
-#define	TEXT_SIZE 	128
-#define	BLOCK_SIZE 	1664 		/* Dynamic check, 13*128 */
-
-	.balign TEXT_SIZE
-LVBR_block:
-	.space	256, 0			/* Power-on class handler, */
-					/* not required here       */
-not_a_tlb_miss:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	/* Save original stack pointer into KCR1 */
-	putcon	SP, KCR1
-
-	/* Save other original registers into reg_save_area */
-        movi  reg_save_area, SP
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* Set args for Non-debug, Not a TLB miss class handler */
-	getcon	EXPEVT, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_FAULT_NOT_TLB, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-
-	.balign 256
-	! VBR+0x200
-	nop
-	.balign 256
-	! VBR+0x300
-	nop
-	.balign 256
-	/*
-	 * Instead of the natural .balign 1024 place RESVEC here
-	 * respecting the final 1KB alignment.
-	 */
-	.balign TEXT_SIZE
-	/*
-	 * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
-	 * block making sure the final alignment is correct.
-	 */
-#ifdef CONFIG_MMU
-tlb_miss:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	putcon	SP, KCR1
-	movi	reg_save_area, SP
-	/* SP is guaranteed 32-byte aligned. */
-	st.q	SP, TLB_SAVED_R0 , r0
-	st.q	SP, TLB_SAVED_R1 , r1
-	st.q	SP, SAVED_R2 , r2
-	st.q	SP, SAVED_R3 , r3
-	st.q	SP, SAVED_R4 , r4
-	st.q	SP, SAVED_R5 , r5
-	st.q	SP, SAVED_R6 , r6
-	st.q	SP, SAVED_R18, r18
-
-	/* Save R25 for safety; as/ld may want to use it to achieve the call to
-	 * the code in mm/tlbmiss.c */
-	st.q	SP, TLB_SAVED_R25, r25
-	gettr	tr0, r2
-	gettr	tr1, r3
-	gettr	tr2, r4
-	gettr	tr3, r5
-	gettr	tr4, r18
-	st.q	SP, SAVED_TR0 , r2
-	st.q	SP, TLB_SAVED_TR1 , r3
-	st.q	SP, TLB_SAVED_TR2 , r4
-	st.q	SP, TLB_SAVED_TR3 , r5
-	st.q	SP, TLB_SAVED_TR4 , r18
-
-	pt	do_fast_page_fault, tr0
-	getcon	SSR, r2
-	getcon	EXPEVT, r3
-	getcon	TEA, r4
-	shlri	r2, 30, r2
-	andi	r2, 1, r2	/* r2 = SSR.MD */
-	blink 	tr0, LINK
-
-	pt	fixup_to_invoke_general_handler, tr1
-
-	/* If the fast path handler fixed the fault, just drop through quickly
-	   to the restore code right away to return to the excepting context.
-	   */
-	bnei/u	r2, 0, tr1
-
-fast_tlb_miss_restore:
-	ld.q	SP, SAVED_TR0, r2
-	ld.q	SP, TLB_SAVED_TR1, r3
-	ld.q	SP, TLB_SAVED_TR2, r4
-
-	ld.q	SP, TLB_SAVED_TR3, r5
-	ld.q	SP, TLB_SAVED_TR4, r18
-
-	ptabs	r2, tr0
-	ptabs	r3, tr1
-	ptabs	r4, tr2
-	ptabs	r5, tr3
-	ptabs	r18, tr4
-
-	ld.q	SP, TLB_SAVED_R0, r0
-	ld.q	SP, TLB_SAVED_R1, r1
-	ld.q	SP, SAVED_R2, r2
-	ld.q	SP, SAVED_R3, r3
-	ld.q	SP, SAVED_R4, r4
-	ld.q	SP, SAVED_R5, r5
-	ld.q	SP, SAVED_R6, r6
-	ld.q	SP, SAVED_R18, r18
-	ld.q	SP, TLB_SAVED_R25, r25
-
-	getcon	KCR1, SP
-	rte
-	nop /* for safety, in case the code is run on sh5-101 cut1.x */
-
-fixup_to_invoke_general_handler:
-
-	/* OK, new method.  Restore stuff that's not expected to get saved into
-	   the 'first-level' reg save area, then just fall through to setting
-	   up the registers and calling the second-level handler. */
-
-	/* 2nd level expects r2,3,4,5,6,18,tr0 to be saved.  So we must restore
-	   r25,tr1-4 and save r6 to get into the right state.  */
-
-	ld.q	SP, TLB_SAVED_TR1, r3
-	ld.q	SP, TLB_SAVED_TR2, r4
-	ld.q	SP, TLB_SAVED_TR3, r5
-	ld.q	SP, TLB_SAVED_TR4, r18
-	ld.q	SP, TLB_SAVED_R25, r25
-
-	ld.q	SP, TLB_SAVED_R0, r0
-	ld.q	SP, TLB_SAVED_R1, r1
-
-	ptabs/u	r3, tr1
-	ptabs/u	r4, tr2
-	ptabs/u	r5, tr3
-	ptabs/u	r18, tr4
-
-	/* Set args for Non-debug, TLB miss class handler */
-	getcon	EXPEVT, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_FAULT_TLB, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-#else /* CONFIG_MMU */
-	.balign 256
-#endif
-
-/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
-   DOES END UP AT VBR+0x600 */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	.balign 256
-	/* VBR + 0x600 */
-
-interrupt:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	/* Save original stack pointer into KCR1 */
-	putcon	SP, KCR1
-
-	/* Save other original registers into reg_save_area */
-        movi  reg_save_area, SP
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* Set args for interrupt class handler */
-	getcon	INTEVT, r2
-	movi	ret_from_irq, r3
-	ori	r3, 1, r3
-	movi	EVENT_INTERRUPT, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-	.balign	TEXT_SIZE		/* let's waste the bare minimum */
-
-LVBR_block_end:				/* Marker. Used for total checking */
-
-	.balign 256
-LRESVEC_block:
-	/* Panic handler. Called with MMU off. Possible causes/actions:
-	 * - Reset:		Jump to program start.
-	 * - Single Step:	Turn off Single Step & return.
-	 * - Others:		Call panic handler, passing PC as arg.
-	 *			(this may need to be extended...)
-	 */
-reset_or_panic:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	putcon	SP, DCR
-	/* First save r0-1 and tr0, as we need to use these */
-	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
-	st.q	SP, 0, r0
-	st.q	SP, 8, r1
-	gettr	tr0, r0
-	st.q	SP, 32, r0
-
-	/* Check cause */
-	getcon	EXPEVT, r0
-	movi	RESET_CAUSE, r1
-	sub	r1, r0, r1		/* r1=0 if reset */
-	movi	_stext-CONFIG_PAGE_OFFSET, r0
-	ori	r0, 1, r0
-	ptabs	r0, tr0
-	beqi	r1, 0, tr0		/* Jump to start address if reset */
-
-	getcon	EXPEVT, r0
-	movi	DEBUGSS_CAUSE, r1
-	sub	r1, r0, r1		/* r1=0 if single step */
-	pta	single_step_panic, tr0
-	beqi	r1, 0, tr0		/* jump if single step */
-
-	/* Now jump to where we save the registers. */
-	movi	panic_stash_regs-CONFIG_PAGE_OFFSET, r1
-	ptabs	r1, tr0
-	blink	tr0, r63
-
-single_step_panic:
-	/* We are in a handler with Single Step set. We need to resume the
-	 * handler, by turning on MMU & turning off Single Step. */
-	getcon	SSR, r0
-	movi	SR_MMU, r1
-	or	r0, r1, r0
-	movi	~SR_SS, r1
-	and	r0, r1, r0
-	putcon	r0, SSR
-	/* Restore EXPEVT, as the rte won't do this */
-	getcon	PEXPEVT, r0
-	putcon	r0, EXPEVT
-	/* Restore regs */
-	ld.q	SP, 32, r0
-	ptabs	r0, tr0
-	ld.q	SP, 0, r0
-	ld.q	SP, 8, r1
-	getcon	DCR, SP
-	synco
-	rte
-
-
-	.balign	256
-debug_exception:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	/*
-	 * Single step/software_break_point first level handler.
-	 * Called with MMU off, so the first thing we do is enable it
-	 * by doing an rte with appropriate SSR.
-	 */
-	putcon	SP, DCR
-	/* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
-	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
-
-	/* With the MMU off, we are bypassing the cache, so purge any
-         * data that will be made stale by the following stores.
-         */
-	ocbp	SP, 0
-	synco
-
-	st.q	SP, 0, r0
-	st.q	SP, 8, r1
-	getcon	SPC, r0
-	st.q	SP, 16, r0
-	getcon	SSR, r0
-	st.q	SP, 24, r0
-
-	/* Enable MMU, block exceptions, set priv mode, disable single step */
-	movi	SR_MMU | SR_BL | SR_MD, r1
-	or	r0, r1, r0
-	movi	~SR_SS, r1
-	and	r0, r1, r0
-	putcon	r0, SSR
-	/* Force control to debug_exception_2 when rte is executed */
-	movi	debug_exeception_2, r0
-	ori	r0, 1, r0      /* force SHmedia, just in case */
-	putcon	r0, SPC
-	getcon	DCR, SP
-	synco
-	rte
-debug_exeception_2:
-	/* Restore saved regs */
-	putcon	SP, KCR1
-	movi	resvec_save_area, SP
-	ld.q	SP, 24, r0
-	putcon	r0, SSR
-	ld.q	SP, 16, r0
-	putcon	r0, SPC
-	ld.q	SP, 0, r0
-	ld.q	SP, 8, r1
-
-	/* Save other original registers into reg_save_area */
-        movi  reg_save_area, SP
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* Set args for debug class handler */
-	getcon	EXPEVT, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_DEBUG, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-
-	.balign	256
-debug_interrupt:
-	/* !!! WE COME HERE IN REAL MODE !!! */
-	/* Hook-up debug interrupt to allow various debugging options to be
-	 * hooked into its handler. */
-	/* Save original stack pointer into KCR1 */
-	synco
-	putcon	SP, KCR1
-	movi	resvec_save_area-CONFIG_PAGE_OFFSET, SP
-	ocbp	SP, 0
-	ocbp	SP, 32
-	synco
-
-	/* Save other original registers into reg_save_area thru real addresses */
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* move (spc,ssr)->(pspc,pssr).  The rte will shift
-	   them back again, so that they look like the originals
-	   as far as the real handler code is concerned. */
-	getcon	spc, r6
-	putcon	r6, pspc
-	getcon	ssr, r6
-	putcon	r6, pssr
-
-	! construct useful SR for handle_exception
-	movi	3, r6
-	shlli	r6, 30, r6
-	getcon	sr, r18
-	or	r18, r6, r6
-	putcon	r6, ssr
-
-	! SSR is now the current SR with the MD and MMU bits set
-	! i.e. the rte will switch back to priv mode and put
-	! the mmu back on
-
-	! construct spc
-	movi	handle_exception, r18
-	ori	r18, 1, r18		! for safety (do we need this?)
-	putcon	r18, spc
-
-	/* Set args for Non-debug, Not a TLB miss class handler */
-
-	! EXPEVT==0x80 is unused, so 'steal' this value to put the
-	! debug interrupt handler in the vectoring table
-	movi	0x80, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_FAULT_NOT_TLB, r4
-
-	or	SP, ZERO, r5
-	movi	CONFIG_PAGE_OFFSET, r6
-	add	r6, r5, r5
-	getcon	KCR1, SP
-
-	synco	! for safety
-	rte	! -> handle_exception, switch back to priv mode again
-
-LRESVEC_block_end:			/* Marker. Unused. */
-
-	.balign	TEXT_SIZE
-
-/*
- * Second level handler for VBR-based exceptions. Pre-handler.
- * In common to all stack-frame sensitive handlers.
- *
- * Inputs:
- * (KCR0) Current [current task union]
- * (KCR1) Original SP
- * (r2)   INTEVT/EXPEVT
- * (r3)   appropriate return address
- * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
- * (r5)   Pointer to reg_save_area
- * (SP)   Original SP
- *
- * Available registers:
- * (r6)
- * (r18)
- * (tr0)
- *
- */
-handle_exception:
-	/* Common 2nd level handler. */
-
-	/* First thing we need an appropriate stack pointer */
-	getcon	SSR, r6
-	shlri	r6, 30, r6
-	andi	r6, 1, r6
-	pta	stack_ok, tr0
-	bne	r6, ZERO, tr0		/* Original stack pointer is fine */
-
-	/* Set stack pointer for user fault */
-	getcon	KCR0, SP
-	movi	THREAD_SIZE, r6		/* Point to the end */
-	add	SP, r6, SP
-
-stack_ok:
-
-/* DEBUG : check for underflow/overflow of the kernel stack */
-	pta	no_underflow, tr0
-	getcon  KCR0, r6
-	movi	1024, r18
-	add	r6, r18, r6
-	bge	SP, r6, tr0 	! ? below 1k from bottom of stack : danger zone
-
-/* Just panic to cause a crash. */
-bad_sp:
-	ld.b	r63, 0, r6
-	nop
-
-no_underflow:
-	pta	bad_sp, tr0
-	getcon	kcr0, r6
-	movi	THREAD_SIZE, r18
-	add	r18, r6, r6
-	bgt	SP, r6, tr0	! sp above the stack
-
-	/* Make some room for the BASIC frame. */
-	movi	-(FRAME_SIZE), r6
-	add	SP, r6, SP
-
-/* Could do this with no stalling if we had another spare register, but the
-   code below will be OK. */
-	ld.q	r5, SAVED_R2, r6
-	ld.q	r5, SAVED_R3, r18
-	st.q	SP, FRAME_R(2), r6
-	ld.q	r5, SAVED_R4, r6
-	st.q	SP, FRAME_R(3), r18
-	ld.q	r5, SAVED_R5, r18
-	st.q	SP, FRAME_R(4), r6
-	ld.q	r5, SAVED_R6, r6
-	st.q	SP, FRAME_R(5), r18
-	ld.q	r5, SAVED_R18, r18
-	st.q	SP, FRAME_R(6), r6
-	ld.q	r5, SAVED_TR0, r6
-	st.q	SP, FRAME_R(18), r18
-	st.q	SP, FRAME_T(0), r6
-
-	/* Keep old SP around */
-	getcon	KCR1, r6
-
-	/* Save the rest of the general purpose registers */
-	st.q	SP, FRAME_R(0), r0
-	st.q	SP, FRAME_R(1), r1
-	st.q	SP, FRAME_R(7), r7
-	st.q	SP, FRAME_R(8), r8
-	st.q	SP, FRAME_R(9), r9
-	st.q	SP, FRAME_R(10), r10
-	st.q	SP, FRAME_R(11), r11
-	st.q	SP, FRAME_R(12), r12
-	st.q	SP, FRAME_R(13), r13
-	st.q	SP, FRAME_R(14), r14
-
-	/* SP is somewhere else */
-	st.q	SP, FRAME_R(15), r6
-
-	st.q	SP, FRAME_R(16), r16
-	st.q	SP, FRAME_R(17), r17
-	/* r18 is saved earlier. */
-	st.q	SP, FRAME_R(19), r19
-	st.q	SP, FRAME_R(20), r20
-	st.q	SP, FRAME_R(21), r21
-	st.q	SP, FRAME_R(22), r22
-	st.q	SP, FRAME_R(23), r23
-	st.q	SP, FRAME_R(24), r24
-	st.q	SP, FRAME_R(25), r25
-	st.q	SP, FRAME_R(26), r26
-	st.q	SP, FRAME_R(27), r27
-	st.q	SP, FRAME_R(28), r28
-	st.q	SP, FRAME_R(29), r29
-	st.q	SP, FRAME_R(30), r30
-	st.q	SP, FRAME_R(31), r31
-	st.q	SP, FRAME_R(32), r32
-	st.q	SP, FRAME_R(33), r33
-	st.q	SP, FRAME_R(34), r34
-	st.q	SP, FRAME_R(35), r35
-	st.q	SP, FRAME_R(36), r36
-	st.q	SP, FRAME_R(37), r37
-	st.q	SP, FRAME_R(38), r38
-	st.q	SP, FRAME_R(39), r39
-	st.q	SP, FRAME_R(40), r40
-	st.q	SP, FRAME_R(41), r41
-	st.q	SP, FRAME_R(42), r42
-	st.q	SP, FRAME_R(43), r43
-	st.q	SP, FRAME_R(44), r44
-	st.q	SP, FRAME_R(45), r45
-	st.q	SP, FRAME_R(46), r46
-	st.q	SP, FRAME_R(47), r47
-	st.q	SP, FRAME_R(48), r48
-	st.q	SP, FRAME_R(49), r49
-	st.q	SP, FRAME_R(50), r50
-	st.q	SP, FRAME_R(51), r51
-	st.q	SP, FRAME_R(52), r52
-	st.q	SP, FRAME_R(53), r53
-	st.q	SP, FRAME_R(54), r54
-	st.q	SP, FRAME_R(55), r55
-	st.q	SP, FRAME_R(56), r56
-	st.q	SP, FRAME_R(57), r57
-	st.q	SP, FRAME_R(58), r58
-	st.q	SP, FRAME_R(59), r59
-	st.q	SP, FRAME_R(60), r60
-	st.q	SP, FRAME_R(61), r61
-	st.q	SP, FRAME_R(62), r62
-
-	/*
-	 * Save the S* registers.
-	 */
-	getcon	SSR, r61
-	st.q	SP, FRAME_S(FSSR), r61
-	getcon	SPC, r62
-	st.q	SP, FRAME_S(FSPC), r62
-	movi	-1, r62			/* Reset syscall_nr */
-	st.q	SP, FRAME_S(FSYSCALL_ID), r62
-
-	/* Save the rest of the target registers */
-	gettr	tr1, r6
-	st.q	SP, FRAME_T(1), r6
-	gettr	tr2, r6
-	st.q	SP, FRAME_T(2), r6
-	gettr	tr3, r6
-	st.q	SP, FRAME_T(3), r6
-	gettr	tr4, r6
-	st.q	SP, FRAME_T(4), r6
-	gettr	tr5, r6
-	st.q	SP, FRAME_T(5), r6
-	gettr	tr6, r6
-	st.q	SP, FRAME_T(6), r6
-	gettr	tr7, r6
-	st.q	SP, FRAME_T(7), r6
-
-	! setup FP so that unwinder can wind back through nested kernel mode
-	! exceptions
-	add	SP, ZERO, r14
-
-	/* For syscall and debug race condition, get TRA now */
-	getcon	TRA, r5
-
-	/* We are in a safe position to turn SR.BL off, but set IMASK=0xf
-	 * Also set FD, to catch FPU usage in the kernel.
-	 *
-	 * benedict.gaster@superh.com 29/07/2002
-	 *
-	 * On all SH5-101 revisions it is unsafe to raise the IMASK and at the
-	 * same time change BL from 1->0, as any pending interrupt of a level
-	 * higher than he previous value of IMASK will leak through and be
-	 * taken unexpectedly.
-	 *
-	 * To avoid this we raise the IMASK and then issue another PUTCON to
-	 * enable interrupts.
-         */
-	getcon	SR, r6
-	movi	SR_IMASK | SR_FD, r7
-	or	r6, r7, r6
-	putcon	r6, SR
-	movi	SR_UNBLOCK_EXC, r7
-	and	r6, r7, r6
-	putcon	r6, SR
-
-
-	/* Now call the appropriate 3rd level handler */
-	or	r3, ZERO, LINK
-	movi	trap_jtable, r3
-	shlri	r2, 3, r2
-	ldx.l	r2, r3, r3
-	shlri	r2, 2, r2
-	ptabs	r3, tr0
-	or	SP, ZERO, r3
-	blink	tr0, ZERO
-
-/*
- * Second level handler for VBR-based exceptions. Post-handlers.
- *
- * Post-handlers for interrupts (ret_from_irq), exceptions
- * (ret_from_exception) and common reentrance doors (restore_all
- * to get back to the original context, ret_from_syscall loop to
- * check kernel exiting).
- *
- * ret_with_reschedule and work_notifysig are an inner lables of
- * the ret_from_syscall loop.
- *
- * In common to all stack-frame sensitive handlers.
- *
- * Inputs:
- * (SP)   struct pt_regs *, original register's frame pointer (basic)
- *
- */
-	.global ret_from_irq
-ret_from_irq:
-	ld.q	SP, FRAME_S(FSSR), r6
-	shlri	r6, 30, r6
-	andi	r6, 1, r6
-	pta	resume_kernel, tr0
-	bne	r6, ZERO, tr0		/* no further checks */
-	STI()
-	pta	ret_with_reschedule, tr0
-	blink	tr0, ZERO		/* Do not check softirqs */
-
-	.global ret_from_exception
-ret_from_exception:
-	preempt_stop()
-
-	ld.q	SP, FRAME_S(FSSR), r6
-	shlri	r6, 30, r6
-	andi	r6, 1, r6
-	pta	resume_kernel, tr0
-	bne	r6, ZERO, tr0		/* no further checks */
-
-	/* Check softirqs */
-
-#ifdef CONFIG_PREEMPTION
-	pta   ret_from_syscall, tr0
-	blink   tr0, ZERO
-
-resume_kernel:
-	CLI()
-
-	pta	restore_all, tr0
-
-	getcon	KCR0, r6
-	ld.l	r6, TI_PRE_COUNT, r7
-	beq/u	r7, ZERO, tr0
-
-need_resched:
-	ld.l	r6, TI_FLAGS, r7
-	movi	(1 << TIF_NEED_RESCHED), r8
-	and	r8, r7, r8
-	bne	r8, ZERO, tr0
-
-	getcon	SR, r7
-	andi	r7, 0xf0, r7
-	bne	r7, ZERO, tr0
-
-	movi	preempt_schedule_irq, r7
-	ori	r7, 1, r7
-	ptabs	r7, tr1
-	blink	tr1, LINK
-
-	pta	need_resched, tr1
-	blink	tr1, ZERO
-#endif
-
-	.global ret_from_syscall
-ret_from_syscall:
-
-ret_with_reschedule:
-	getcon	KCR0, r6		! r6 contains current_thread_info
-	ld.l	r6, TI_FLAGS, r7	! r7 contains current_thread_info->flags
-
-	movi	_TIF_NEED_RESCHED, r8
-	and	r8, r7, r8
-	pta	work_resched, tr0
-	bne	r8, ZERO, tr0
-
-	pta	restore_all, tr1
-
-	movi	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8
-	and	r8, r7, r8
-	pta	work_notifysig, tr0
-	bne	r8, ZERO, tr0
-
-	blink	tr1, ZERO
-
-work_resched:
-	pta	ret_from_syscall, tr0
-	gettr	tr0, LINK
-	movi	schedule, r6
-	ptabs	r6, tr0
-	blink	tr0, ZERO		/* Call schedule(), return on top */
-
-work_notifysig:
-	gettr	tr1, LINK
-
-	movi	do_notify_resume, r6
-	ptabs	r6, tr0
-	or	SP, ZERO, r2
-	or	r7, ZERO, r3
-	blink	tr0, LINK	    /* Call do_notify_resume(regs, current_thread_info->flags), return here */
-
-restore_all:
-	/* Do prefetches */
-
-	ld.q	SP, FRAME_T(0), r6
-	ld.q	SP, FRAME_T(1), r7
-	ld.q	SP, FRAME_T(2), r8
-	ld.q	SP, FRAME_T(3), r9
-	ptabs	r6, tr0
-	ptabs	r7, tr1
-	ptabs	r8, tr2
-	ptabs	r9, tr3
-	ld.q	SP, FRAME_T(4), r6
-	ld.q	SP, FRAME_T(5), r7
-	ld.q	SP, FRAME_T(6), r8
-	ld.q	SP, FRAME_T(7), r9
-	ptabs	r6, tr4
-	ptabs	r7, tr5
-	ptabs	r8, tr6
-	ptabs	r9, tr7
-
-	ld.q	SP, FRAME_R(0), r0
-	ld.q	SP, FRAME_R(1), r1
-	ld.q	SP, FRAME_R(2), r2
-	ld.q	SP, FRAME_R(3), r3
-	ld.q	SP, FRAME_R(4), r4
-	ld.q	SP, FRAME_R(5), r5
-	ld.q	SP, FRAME_R(6), r6
-	ld.q	SP, FRAME_R(7), r7
-	ld.q	SP, FRAME_R(8), r8
-	ld.q	SP, FRAME_R(9), r9
-	ld.q	SP, FRAME_R(10), r10
-	ld.q	SP, FRAME_R(11), r11
-	ld.q	SP, FRAME_R(12), r12
-	ld.q	SP, FRAME_R(13), r13
-	ld.q	SP, FRAME_R(14), r14
-
-	ld.q	SP, FRAME_R(16), r16
-	ld.q	SP, FRAME_R(17), r17
-	ld.q	SP, FRAME_R(18), r18
-	ld.q	SP, FRAME_R(19), r19
-	ld.q	SP, FRAME_R(20), r20
-	ld.q	SP, FRAME_R(21), r21
-	ld.q	SP, FRAME_R(22), r22
-	ld.q	SP, FRAME_R(23), r23
-	ld.q	SP, FRAME_R(24), r24
-	ld.q	SP, FRAME_R(25), r25
-	ld.q	SP, FRAME_R(26), r26
-	ld.q	SP, FRAME_R(27), r27
-	ld.q	SP, FRAME_R(28), r28
-	ld.q	SP, FRAME_R(29), r29
-	ld.q	SP, FRAME_R(30), r30
-	ld.q	SP, FRAME_R(31), r31
-	ld.q	SP, FRAME_R(32), r32
-	ld.q	SP, FRAME_R(33), r33
-	ld.q	SP, FRAME_R(34), r34
-	ld.q	SP, FRAME_R(35), r35
-	ld.q	SP, FRAME_R(36), r36
-	ld.q	SP, FRAME_R(37), r37
-	ld.q	SP, FRAME_R(38), r38
-	ld.q	SP, FRAME_R(39), r39
-	ld.q	SP, FRAME_R(40), r40
-	ld.q	SP, FRAME_R(41), r41
-	ld.q	SP, FRAME_R(42), r42
-	ld.q	SP, FRAME_R(43), r43
-	ld.q	SP, FRAME_R(44), r44
-	ld.q	SP, FRAME_R(45), r45
-	ld.q	SP, FRAME_R(46), r46
-	ld.q	SP, FRAME_R(47), r47
-	ld.q	SP, FRAME_R(48), r48
-	ld.q	SP, FRAME_R(49), r49
-	ld.q	SP, FRAME_R(50), r50
-	ld.q	SP, FRAME_R(51), r51
-	ld.q	SP, FRAME_R(52), r52
-	ld.q	SP, FRAME_R(53), r53
-	ld.q	SP, FRAME_R(54), r54
-	ld.q	SP, FRAME_R(55), r55
-	ld.q	SP, FRAME_R(56), r56
-	ld.q	SP, FRAME_R(57), r57
-	ld.q	SP, FRAME_R(58), r58
-
-	getcon	SR, r59
-	movi	SR_BLOCK_EXC, r60
-	or	r59, r60, r59
-	putcon	r59, SR			/* SR.BL = 1, keep nesting out */
-	ld.q	SP, FRAME_S(FSSR), r61
-	ld.q	SP, FRAME_S(FSPC), r62
-	movi	SR_ASID_MASK, r60
-	and	r59, r60, r59
-	andc	r61, r60, r61		/* Clear out older ASID */
-	or	r59, r61, r61		/* Retain current ASID */
-	putcon	r61, SSR
-	putcon	r62, SPC
-
-	/* Ignore FSYSCALL_ID */
-
-	ld.q	SP, FRAME_R(59), r59
-	ld.q	SP, FRAME_R(60), r60
-	ld.q	SP, FRAME_R(61), r61
-	ld.q	SP, FRAME_R(62), r62
-
-	/* Last touch */
-	ld.q	SP, FRAME_R(15), SP
-	rte
-	nop
-
-/*
- * Third level handlers for VBR-based exceptions. Adapting args to
- * and/or deflecting to fourth level handlers.
- *
- * Fourth level handlers interface.
- * Most are C-coded handlers directly pointed by the trap_jtable.
- * (Third = Fourth level)
- * Inputs:
- * (r2)   fault/interrupt code, entry number (e.g. NMI = 14,
- *	  IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
- * (r3)   struct pt_regs *, original register's frame pointer
- * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
- * (r5)   TRA control register (for syscall/debug benefit only)
- * (LINK) return address
- * (SP)   = r3
- *
- * Kernel TLB fault handlers will get a slightly different interface.
- * (r2)   struct pt_regs *, original register's frame pointer
- * (r3)   page fault error code (see asm/thread_info.h)
- * (r4)   Effective Address of fault
- * (LINK) return address
- * (SP)   = r2
- *
- * fpu_error_or_IRQ? is a helper to deflect to the right cause.
- *
- */
-#ifdef CONFIG_MMU
-tlb_miss_load:
-	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3		/* Read */
-	getcon	TEA, r4
-	pta	call_do_page_fault, tr0
-	beq	ZERO, ZERO, tr0
-
-tlb_miss_store:
-	or	SP, ZERO, r2
-	movi	FAULT_CODE_WRITE, r3		/* Write */
-	getcon	TEA, r4
-	pta	call_do_page_fault, tr0
-	beq	ZERO, ZERO, tr0
-
-itlb_miss_or_IRQ:
-	pta	its_IRQ, tr0
-	beqi/u	r4, EVENT_INTERRUPT, tr0
-
-	/* ITLB miss */
-	or	SP, ZERO, r2
-	movi	FAULT_CODE_ITLB, r3
-	getcon	TEA, r4
-	/* Fall through */
-
-call_do_page_fault:
-	movi	do_page_fault, r6
-        ptabs	r6, tr0
-        blink	tr0, ZERO
-#endif /* CONFIG_MMU */
-
-fpu_error_or_IRQA:
-	pta	its_IRQ, tr0
-	beqi/l	r4, EVENT_INTERRUPT, tr0
-#ifdef CONFIG_SH_FPU
-	movi	fpu_state_restore_trap_handler, r6
-#else
-	movi	do_exception_error, r6
-#endif
-	ptabs	r6, tr0
-	blink	tr0, ZERO
-
-fpu_error_or_IRQB:
-	pta	its_IRQ, tr0
-	beqi/l	r4, EVENT_INTERRUPT, tr0
-#ifdef CONFIG_SH_FPU
-	movi	fpu_state_restore_trap_handler, r6
-#else
-	movi	do_exception_error, r6
-#endif
-	ptabs	r6, tr0
-	blink	tr0, ZERO
-
-its_IRQ:
-	movi	do_IRQ, r6
-	ptabs	r6, tr0
-	blink	tr0, ZERO
-
-/*
- * system_call/unknown_trap third level handler:
- *
- * Inputs:
- * (r2)   fault/interrupt code, entry number (TRAP = 11)
- * (r3)   struct pt_regs *, original register's frame pointer
- * (r4)   Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
- * (r5)   TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
- * (SP)   = r3
- * (LINK) return address: ret_from_exception
- * (*r3)  Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
- *
- * Outputs:
- * (*r3)  Syscall reply (Saved r2)
- * (LINK) In case of syscall only it can be scrapped.
- *        Common second level post handler will be ret_from_syscall.
- *        Common (non-trace) exit point to that is syscall_ret (saving
- *        result to r2). Common bad exit point is syscall_bad (returning
- *        ENOSYS then saved to r2).
- *
- */
-
-unknown_trap:
-	/* Unknown Trap or User Trace */
-	movi	do_unknown_trapa, r6
-	ptabs	r6, tr0
-        ld.q    r3, FRAME_R(9), r2	/* r2 = #arg << 16 | syscall # */
-        andi    r2, 0x1ff, r2		/* r2 = syscall # */
-	blink	tr0, LINK
-
-	pta	syscall_ret, tr0
-	blink	tr0, ZERO
-
-        /* New syscall implementation*/
-system_call:
-	pta	unknown_trap, tr0
-        or      r5, ZERO, r4            /* TRA (=r5) -> r4 */
-        shlri   r4, 20, r4
-	bnei	r4, 1, tr0		/* unknown_trap if not 0x1yzzzz */
-
-        /* It's a system call */
-	st.q    r3, FRAME_S(FSYSCALL_ID), r5 	/* ID (0x1yzzzz) -> stack */
-	andi    r5, 0x1ff, r5			/* syscall # -> r5	  */
-
-	STI()
-
-	pta	syscall_allowed, tr0
-	movi	NR_syscalls - 1, r4	/* Last valid */
-	bgeu/l	r4, r5, tr0
-
-syscall_bad:
-	/* Return ENOSYS ! */
-	movi	-(ENOSYS), r2		/* Fall-through */
-
-	.global syscall_ret
-syscall_ret:
-	st.q	SP, FRAME_R(9), r2	/* Expecting SP back to BASIC frame */
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2		/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO
-
-
-/*  A different return path for ret_from_fork, because we now need
- *  to call schedule_tail with the later kernels. Because prev is
- *  loaded into r2 by switch_to() means we can just call it straight  away
- */
-
-.global	ret_from_fork
-ret_from_fork:
-
-	movi	schedule_tail,r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	blink	tr0, LINK
-
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2		/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO
-
-.global	ret_from_kernel_thread
-ret_from_kernel_thread:
-
-	movi	schedule_tail,r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	blink	tr0, LINK
-
-	ld.q	SP, FRAME_R(2), r2
-	ld.q	SP, FRAME_R(3), r3
-	ptabs	r3, tr0
-	blink	tr0, LINK
-
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2		/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO
-
-syscall_allowed:
-	/* Use LINK to deflect the exit point, default is syscall_ret */
-	pta	syscall_ret, tr0
-	gettr	tr0, LINK
-	pta	syscall_notrace, tr0
-
-	getcon	KCR0, r2
-	ld.l	r2, TI_FLAGS, r4
-	movi	_TIF_WORK_SYSCALL_MASK, r6
-	and	r6, r4, r6
-	beq/l	r6, ZERO, tr0
-
-	/* Trace it by calling syscall_trace before and after */
-	movi	do_syscall_trace_enter, r4
-	or	SP, ZERO, r2
-	ptabs	r4, tr0
-	blink	tr0, LINK
-
-	/* Save the retval */
-	st.q	SP, FRAME_R(2), r2
-
-	/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
-	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
-	andi	r5, 0x1ff, r5
-
-	pta	syscall_ret_trace, tr0
-	gettr	tr0, LINK
-
-syscall_notrace:
-	/* Now point to the appropriate 4th level syscall handler */
-	movi	sys_call_table, r4
-	shlli	r5, 2, r5
-	ldx.l	r4, r5, r5
-	ptabs	r5, tr0
-
-	/* Prepare original args */
-	ld.q	SP, FRAME_R(2), r2
-	ld.q	SP, FRAME_R(3), r3
-	ld.q	SP, FRAME_R(4), r4
-	ld.q	SP, FRAME_R(5), r5
-	ld.q	SP, FRAME_R(6), r6
-	ld.q	SP, FRAME_R(7), r7
-
-	/* And now the trick for those syscalls requiring regs * ! */
-	or	SP, ZERO, r8
-
-	/* Call it */
-	blink	tr0, ZERO	/* LINK is already properly set */
-
-syscall_ret_trace:
-	/* We get back here only if under trace */
-	st.q	SP, FRAME_R(9), r2	/* Save return value */
-
-	movi	do_syscall_trace_leave, LINK
-	or	SP, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, LINK
-
-	/* This needs to be done after any syscall tracing */
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2	/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO		/* Resume normal return sequence */
-
-/*
- * --- Switch to running under a particular ASID and return the previous ASID value
- * --- The caller is assumed to have done a cli before calling this.
- *
- * Input r2 : new ASID
- * Output r2 : old ASID
- */
-
-	.global switch_and_save_asid
-switch_and_save_asid:
-	getcon	sr, r0
-	movi	255, r4
-	shlli 	r4, 16, r4	/* r4 = mask to select ASID */
-	and	r0, r4, r3	/* r3 = shifted old ASID */
-	andi	r2, 255, r2	/* mask down new ASID */
-	shlli	r2, 16, r2	/* align new ASID against SR.ASID */
-	andc	r0, r4, r0	/* efface old ASID from SR */
-	or	r0, r2, r0	/* insert the new ASID */
-	putcon	r0, ssr
-	movi	1f, r0
-	putcon	r0, spc
-	rte
-	nop
-1:
-	ptabs	LINK, tr0
-	shlri	r3, 16, r2	/* r2 = old ASID */
-	blink tr0, r63
-
-	.global	route_to_panic_handler
-route_to_panic_handler:
-	/* Switch to real mode, goto panic_handler, don't return.  Useful for
-	   last-chance debugging, e.g. if no output wants to go to the console.
-	   */
-
-	movi	panic_handler - CONFIG_PAGE_OFFSET, r1
-	ptabs	r1, tr0
-	pta	1f, tr1
-	gettr	tr1, r0
-	putcon	r0, spc
-	getcon	sr, r0
-	movi	1, r1
-	shlli	r1, 31, r1
-	andc	r0, r1, r0
-	putcon	r0, ssr
-	rte
-	nop
-1:	/* Now in real mode */
-	blink tr0, r63
-	nop
-
-	.global peek_real_address_q
-peek_real_address_q:
-	/* Two args:
-	   r2 : real mode address to peek
-	   r2(out) : result quadword
-
-	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to ioremap the debug
-	   module, and to avoid the need to ioremap the watchpoint
-	   controller in a way that identity maps sufficient bits to avoid the
-	   SH5-101 cut2 silicon defect).
-
-	   This code is not performance critical
-	*/
-
-	add.l	r2, r63, r2	/* sign extend address */
-	getcon	sr, r0		/* r0 = saved original SR */
-	movi	1, r1
-	shlli	r1, 28, r1
-	or	r0, r1, r1	/* r0 with block bit set */
-	putcon	r1, sr		/* now in critical section */
-	movi	1, r36
-	shlli	r36, 31, r36
-	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
-
-	putcon	r1, ssr
-	movi	.peek0 - CONFIG_PAGE_OFFSET, r36 /* real mode target address */
-	movi	1f, r37		/* virtual mode return addr */
-	putcon	r36, spc
-
-	synco
-	rte
-	nop
-
-.peek0:	/* come here in real mode, don't touch caches!!
-           still in critical section (sr.bl==1) */
-	putcon	r0, ssr
-	putcon	r37, spc
-	/* Here's the actual peek.  If the address is bad, all bets are now off
-	 * what will happen (handlers invoked in real-mode = bad news) */
-	ld.q	r2, 0, r2
-	synco
-	rte	/* Back to virtual mode */
-	nop
-
-1:
-	ptabs	LINK, tr0
-	blink	tr0, r63
-
-	.global poke_real_address_q
-poke_real_address_q:
-	/* Two args:
-	   r2 : real mode address to poke
-	   r3 : quadword value to write.
-
-	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to ioremap the debug
-	   module, and to avoid the need to ioremap the watchpoint
-	   controller in a way that identity maps sufficient bits to avoid the
-	   SH5-101 cut2 silicon defect).
-
-	   This code is not performance critical
-	*/
-
-	add.l	r2, r63, r2	/* sign extend address */
-	getcon	sr, r0		/* r0 = saved original SR */
-	movi	1, r1
-	shlli	r1, 28, r1
-	or	r0, r1, r1	/* r0 with block bit set */
-	putcon	r1, sr		/* now in critical section */
-	movi	1, r36
-	shlli	r36, 31, r36
-	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
-
-	putcon	r1, ssr
-	movi	.poke0-CONFIG_PAGE_OFFSET, r36 /* real mode target address */
-	movi	1f, r37		/* virtual mode return addr */
-	putcon	r36, spc
-
-	synco
-	rte
-	nop
-
-.poke0:	/* come here in real mode, don't touch caches!!
-           still in critical section (sr.bl==1) */
-	putcon	r0, ssr
-	putcon	r37, spc
-	/* Here's the actual poke.  If the address is bad, all bets are now off
-	 * what will happen (handlers invoked in real-mode = bad news) */
-	st.q	r2, 0, r3
-	synco
-	rte	/* Back to virtual mode */
-	nop
-
-1:
-	ptabs	LINK, tr0
-	blink	tr0, r63
-
-#ifdef CONFIG_MMU
-/*
- * --- User Access Handling Section
- */
-
-/*
- * User Access support. It all moved to non inlined Assembler
- * functions in here.
- *
- * __kernel_size_t __copy_user(void *__to, const void *__from,
- *			       __kernel_size_t __n)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  size in bytes
- *
- * Ouputs:
- * (*r2) target data
- * (r2)  non-copied bytes
- *
- * If a fault occurs on the user pointer, bail out early and return the
- * number of bytes not copied in r2.
- * Strategy : for large blocks, call a real memcpy function which can
- * move >1 byte at a time using unaligned ld/st instructions, and can
- * manipulate the cache using prefetch + alloco to improve the speed
- * further.  If a fault occurs in that function, just revert to the
- * byte-by-byte approach used for small blocks; this is rare so the
- * performance hit for that case does not matter.
- *
- * For small blocks it's not worth the overhead of setting up and calling
- * the memcpy routine; do the copy a byte at a time.
- *
- */
-	.global	__copy_user
-__copy_user:
-	pta	__copy_user_byte_by_byte, tr1
-	movi	16, r0 ! this value is a best guess, should tune it by benchmarking
-	bge/u	r0, r4, tr1
-	pta copy_user_memcpy, tr0
-	addi	SP, -32, SP
-	/* Save arguments in case we have to fix-up unhandled page fault */
-	st.q	SP, 0, r2
-	st.q	SP, 8, r3
-	st.q	SP, 16, r4
-	st.q	SP, 24, r35 ! r35 is callee-save
-	/* Save LINK in a register to reduce RTS time later (otherwise
-	   ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
-	ori	LINK, 0, r35
-	blink	tr0, LINK
-
-	/* Copy completed normally if we get back here */
-	ptabs	r35, tr0
-	ld.q	SP, 24, r35
-	/* don't restore r2-r4, pointless */
-	/* set result=r2 to zero as the copy must have succeeded. */
-	or	r63, r63, r2
-	addi	SP, 32, SP
-	blink	tr0, r63 ! RTS
-
-	.global __copy_user_fixup
-__copy_user_fixup:
-	/* Restore stack frame */
-	ori	r35, 0, LINK
-	ld.q	SP, 24, r35
-	ld.q	SP, 16, r4
-	ld.q	SP,  8, r3
-	ld.q	SP,  0, r2
-	addi	SP, 32, SP
-	/* Fall through to original code, in the 'same' state we entered with */
-
-/* The slow byte-by-byte method is used if the fast copy traps due to a bad
-   user address.  In that rare case, the speed drop can be tolerated. */
-__copy_user_byte_by_byte:
-	pta	___copy_user_exit, tr1
-	pta	___copy_user1, tr0
-	beq/u	r4, r63, tr1	/* early exit for zero length copy */
-	sub	r2, r3, r0
-	addi	r0, -1, r0
-
-___copy_user1:
-	ld.b	r3, 0, r5		/* Fault address 1 */
-
-	/* Could rewrite this to use just 1 add, but the second comes 'free'
-	   due to load latency */
-	addi	r3, 1, r3
-	addi	r4, -1, r4		/* No real fixup required */
-___copy_user2:
-	stx.b	r3, r0, r5		/* Fault address 2 */
-	bne     r4, ZERO, tr0
-
-___copy_user_exit:
-	or	r4, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  size in bytes
- *
- * Ouputs:
- * (*r2) zero-ed target data
- * (r2)  non-zero-ed bytes
- */
-	.global	__clear_user
-__clear_user:
-	pta	___clear_user_exit, tr1
-	pta	___clear_user1, tr0
-	beq/u	r3, r63, tr1
-
-___clear_user1:
-	st.b	r2, 0, ZERO		/* Fault address */
-	addi	r2, 1, r2
-	addi	r3, -1, r3		/* No real fixup required */
-	bne     r3, ZERO, tr0
-
-___clear_user_exit:
-	or	r3, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-#endif /* CONFIG_MMU */
-
-/*
- * extern long __get_user_asm_?(void *val, long addr)
- *
- * Inputs:
- * (r2)  dest address
- * (r3)  source address (in User Space)
- *
- * Ouputs:
- * (r2)  -EFAULT (faulting)
- *       0 	 (not faulting)
- */
-	.global	__get_user_asm_b
-__get_user_asm_b:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_b1:
-	ld.b	r3, 0, r5		/* r5 = data */
-	st.b	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_b_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__get_user_asm_w
-__get_user_asm_w:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_w1:
-	ld.w	r3, 0, r5		/* r5 = data */
-	st.w	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_w_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__get_user_asm_l
-__get_user_asm_l:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_l1:
-	ld.l	r3, 0, r5		/* r5 = data */
-	st.l	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_l_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__get_user_asm_q
-__get_user_asm_q:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_q1:
-	ld.q	r3, 0, r5		/* r5 = data */
-	st.q	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_q_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __put_user_asm_?(void *pval, long addr)
- *
- * Inputs:
- * (r2)  kernel pointer to value
- * (r3)  dest address (in User Space)
- *
- * Ouputs:
- * (r2)  -EFAULT (faulting)
- *       0 	 (not faulting)
- */
-	.global	__put_user_asm_b
-__put_user_asm_b:
-	ld.b	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_b1:
-	st.b	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_b_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__put_user_asm_w
-__put_user_asm_w:
-	ld.w	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_w1:
-	st.w	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_w_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__put_user_asm_l
-__put_user_asm_l:
-	ld.l	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_l1:
-	st.l	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_l_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__put_user_asm_q
-__put_user_asm_q:
-	ld.q	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_q1:
-	st.q	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_q_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-panic_stash_regs:
-	/* The idea is : when we get an unhandled panic, we dump the registers
-	   to a known memory location, the just sit in a tight loop.
-	   This allows the human to look at the memory region through the GDB
-	   session (assuming the debug module's SHwy initiator isn't locked up
-	   or anything), to hopefully analyze the cause of the panic. */
-
-	/* On entry, former r15 (SP) is in DCR
-	   former r0  is at resvec_saved_area + 0
-	   former r1  is at resvec_saved_area + 8
-	   former tr0 is at resvec_saved_area + 32
-	   DCR is the only register whose value is lost altogether.
-	*/
-
-	movi	0xffffffff80000000, r0 ! phy of dump area
-	ld.q	SP, 0x000, r1	! former r0
-	st.q	r0,  0x000, r1
-	ld.q	SP, 0x008, r1	! former r1
-	st.q	r0,  0x008, r1
-	st.q	r0,  0x010, r2
-	st.q	r0,  0x018, r3
-	st.q	r0,  0x020, r4
-	st.q	r0,  0x028, r5
-	st.q	r0,  0x030, r6
-	st.q	r0,  0x038, r7
-	st.q	r0,  0x040, r8
-	st.q	r0,  0x048, r9
-	st.q	r0,  0x050, r10
-	st.q	r0,  0x058, r11
-	st.q	r0,  0x060, r12
-	st.q	r0,  0x068, r13
-	st.q	r0,  0x070, r14
-	getcon	dcr, r14
-	st.q	r0,  0x078, r14
-	st.q	r0,  0x080, r16
-	st.q	r0,  0x088, r17
-	st.q	r0,  0x090, r18
-	st.q	r0,  0x098, r19
-	st.q	r0,  0x0a0, r20
-	st.q	r0,  0x0a8, r21
-	st.q	r0,  0x0b0, r22
-	st.q	r0,  0x0b8, r23
-	st.q	r0,  0x0c0, r24
-	st.q	r0,  0x0c8, r25
-	st.q	r0,  0x0d0, r26
-	st.q	r0,  0x0d8, r27
-	st.q	r0,  0x0e0, r28
-	st.q	r0,  0x0e8, r29
-	st.q	r0,  0x0f0, r30
-	st.q	r0,  0x0f8, r31
-	st.q	r0,  0x100, r32
-	st.q	r0,  0x108, r33
-	st.q	r0,  0x110, r34
-	st.q	r0,  0x118, r35
-	st.q	r0,  0x120, r36
-	st.q	r0,  0x128, r37
-	st.q	r0,  0x130, r38
-	st.q	r0,  0x138, r39
-	st.q	r0,  0x140, r40
-	st.q	r0,  0x148, r41
-	st.q	r0,  0x150, r42
-	st.q	r0,  0x158, r43
-	st.q	r0,  0x160, r44
-	st.q	r0,  0x168, r45
-	st.q	r0,  0x170, r46
-	st.q	r0,  0x178, r47
-	st.q	r0,  0x180, r48
-	st.q	r0,  0x188, r49
-	st.q	r0,  0x190, r50
-	st.q	r0,  0x198, r51
-	st.q	r0,  0x1a0, r52
-	st.q	r0,  0x1a8, r53
-	st.q	r0,  0x1b0, r54
-	st.q	r0,  0x1b8, r55
-	st.q	r0,  0x1c0, r56
-	st.q	r0,  0x1c8, r57
-	st.q	r0,  0x1d0, r58
-	st.q	r0,  0x1d8, r59
-	st.q	r0,  0x1e0, r60
-	st.q	r0,  0x1e8, r61
-	st.q	r0,  0x1f0, r62
-	st.q	r0,  0x1f8, r63	! bogus, but for consistency's sake...
-
-	ld.q	SP, 0x020, r1  ! former tr0
-	st.q	r0,  0x200, r1
-	gettr	tr1, r1
-	st.q	r0,  0x208, r1
-	gettr	tr2, r1
-	st.q	r0,  0x210, r1
-	gettr	tr3, r1
-	st.q	r0,  0x218, r1
-	gettr	tr4, r1
-	st.q	r0,  0x220, r1
-	gettr	tr5, r1
-	st.q	r0,  0x228, r1
-	gettr	tr6, r1
-	st.q	r0,  0x230, r1
-	gettr	tr7, r1
-	st.q	r0,  0x238, r1
-
-	getcon	sr,  r1
-	getcon	ssr,  r2
-	getcon	pssr,  r3
-	getcon	spc,  r4
-	getcon	pspc,  r5
-	getcon	intevt,  r6
-	getcon	expevt,  r7
-	getcon	pexpevt,  r8
-	getcon	tra,  r9
-	getcon	tea,  r10
-	getcon	kcr0, r11
-	getcon	kcr1, r12
-	getcon	vbr,  r13
-	getcon	resvec,  r14
-
-	st.q	r0,  0x240, r1
-	st.q	r0,  0x248, r2
-	st.q	r0,  0x250, r3
-	st.q	r0,  0x258, r4
-	st.q	r0,  0x260, r5
-	st.q	r0,  0x268, r6
-	st.q	r0,  0x270, r7
-	st.q	r0,  0x278, r8
-	st.q	r0,  0x280, r9
-	st.q	r0,  0x288, r10
-	st.q	r0,  0x290, r11
-	st.q	r0,  0x298, r12
-	st.q	r0,  0x2a0, r13
-	st.q	r0,  0x2a8, r14
-
-	getcon	SPC,r2
-	getcon	SSR,r3
-	getcon	EXPEVT,r4
-	/* Prepare to jump to C - physical address */
-	movi	panic_handler-CONFIG_PAGE_OFFSET, r1
-	ori	r1, 1, r1
-	ptabs   r1, tr0
-	getcon	DCR, SP
-	blink	tr0, ZERO
-	nop
-	nop
-	nop
-	nop
-
-
-
-
-/*
- * --- Signal Handling Section
- */
-
-/*
- * extern long long _sa_default_rt_restorer
- * extern long long _sa_default_restorer
- *
- *		 or, better,
- *
- * extern void _sa_default_rt_restorer(void)
- * extern void _sa_default_restorer(void)
- *
- * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
- * from user space. Copied into user space by signal management.
- * Both must be quad aligned and 2 quad long (4 instructions).
- *
- */
-	.balign 8
-	.global sa_default_rt_restorer
-sa_default_rt_restorer:
-	movi	0x10, r9
-	shori	__NR_rt_sigreturn, r9
-	trapa	r9
-	nop
-
-	.balign 8
-	.global sa_default_restorer
-sa_default_restorer:
-	movi	0x10, r9
-	shori	__NR_sigreturn, r9
-	trapa	r9
-	nop
-
-/*
- * --- __ex_table Section
- */
-
-/*
- * User Access Exception Table.
- */
-	.section	__ex_table,  "a"
-
-	.global asm_uaccess_start	/* Just a marker */
-asm_uaccess_start:
-
-#ifdef CONFIG_MMU
-	.long	___copy_user1, ___copy_user_exit
-	.long	___copy_user2, ___copy_user_exit
-	.long	___clear_user1, ___clear_user_exit
-#endif
-	.long	___get_user_asm_b1, ___get_user_asm_b_exit
-	.long	___get_user_asm_w1, ___get_user_asm_w_exit
-	.long	___get_user_asm_l1, ___get_user_asm_l_exit
-	.long	___get_user_asm_q1, ___get_user_asm_q_exit
-	.long	___put_user_asm_b1, ___put_user_asm_b_exit
-	.long	___put_user_asm_w1, ___put_user_asm_w_exit
-	.long	___put_user_asm_l1, ___put_user_asm_l_exit
-	.long	___put_user_asm_q1, ___put_user_asm_q_exit
-
-	.global asm_uaccess_end		/* Just a marker */
-asm_uaccess_end:
-
-
-
-
-/*
- * --- .init.text Section
- */
-
-	__INIT
-
-/*
- * void trap_init (void)
- *
- */
-	.global	trap_init
-trap_init:
-	addi	SP, -24, SP			/* Room to save r28/r29/r30 */
-	st.q	SP, 0, r28
-	st.q	SP, 8, r29
-	st.q	SP, 16, r30
-
-	/* Set VBR and RESVEC */
-	movi	LVBR_block, r19
-	andi	r19, -4, r19			/* reset MMUOFF + reserved */
-	/* For RESVEC exceptions we force the MMU off, which means we need the
-	   physical address. */
-	movi	LRESVEC_block-CONFIG_PAGE_OFFSET, r20
-	andi	r20, -4, r20			/* reset reserved */
-	ori	r20, 1, r20			/* set MMUOFF */
-	putcon	r19, VBR
-	putcon	r20, RESVEC
-
-	/* Sanity check */
-	movi	LVBR_block_end, r21
-	andi	r21, -4, r21
-	movi	BLOCK_SIZE, r29			/* r29 = expected size */
-	or	r19, ZERO, r30
-	add	r19, r29, r19
-
-	/*
-	 * Ugly, but better loop forever now than crash afterwards.
-	 * We should print a message, but if we touch LVBR or
-	 * LRESVEC blocks we should not be surprised if we get stuck
-	 * in trap_init().
-	 */
-	pta	trap_init_loop, tr1
-	gettr	tr1, r28			/* r28 = trap_init_loop */
-	sub	r21, r30, r30			/* r30 = actual size */
-
-	/*
-	 * VBR/RESVEC handlers overlap by being bigger than
-	 * allowed. Very bad. Just loop forever.
-	 * (r28) panic/loop address
-	 * (r29) expected size
-	 * (r30) actual size
-	 */
-trap_init_loop:
-	bne	r19, r21, tr1
-
-	/* Now that exception vectors are set up reset SR.BL */
-	getcon 	SR, r22
-	movi	SR_UNBLOCK_EXC, r23
-	and	r22, r23, r22
-	putcon	r22, SR
-
-	addi	SP, 24, SP
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-

arch/sh/kernel/cpu/sh5/fpu.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/fpu.c
- *
- * Copyright (C) 2001  Manuela Cirronis, Paolo Alberelli
- * Copyright (C) 2002  STMicroelectronics Limited
- *   Author : Stuart Menefy
- *
- * Started from SH4 version:
- *   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
- */
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <asm/processor.h>
-
-void save_fpu(struct task_struct *tsk)
-{
-	asm volatile("fst.p     %0, (0*8), fp0\n\t"
-		     "fst.p     %0, (1*8), fp2\n\t"
-		     "fst.p     %0, (2*8), fp4\n\t"
-		     "fst.p     %0, (3*8), fp6\n\t"
-		     "fst.p     %0, (4*8), fp8\n\t"
-		     "fst.p     %0, (5*8), fp10\n\t"
-		     "fst.p     %0, (6*8), fp12\n\t"
-		     "fst.p     %0, (7*8), fp14\n\t"
-		     "fst.p     %0, (8*8), fp16\n\t"
-		     "fst.p     %0, (9*8), fp18\n\t"
-		     "fst.p     %0, (10*8), fp20\n\t"
-		     "fst.p     %0, (11*8), fp22\n\t"
-		     "fst.p     %0, (12*8), fp24\n\t"
-		     "fst.p     %0, (13*8), fp26\n\t"
-		     "fst.p     %0, (14*8), fp28\n\t"
-		     "fst.p     %0, (15*8), fp30\n\t"
-		     "fst.p     %0, (16*8), fp32\n\t"
-		     "fst.p     %0, (17*8), fp34\n\t"
-		     "fst.p     %0, (18*8), fp36\n\t"
-		     "fst.p     %0, (19*8), fp38\n\t"
-		     "fst.p     %0, (20*8), fp40\n\t"
-		     "fst.p     %0, (21*8), fp42\n\t"
-		     "fst.p     %0, (22*8), fp44\n\t"
-		     "fst.p     %0, (23*8), fp46\n\t"
-		     "fst.p     %0, (24*8), fp48\n\t"
-		     "fst.p     %0, (25*8), fp50\n\t"
-		     "fst.p     %0, (26*8), fp52\n\t"
-		     "fst.p     %0, (27*8), fp54\n\t"
-		     "fst.p     %0, (28*8), fp56\n\t"
-		     "fst.p     %0, (29*8), fp58\n\t"
-		     "fst.p     %0, (30*8), fp60\n\t"
-		     "fst.p     %0, (31*8), fp62\n\t"
-
-		     "fgetscr   fr63\n\t"
-		     "fst.s     %0, (32*8), fr63\n\t"
-		: /* no output */
-		: "r" (&tsk->thread.xstate->hardfpu)
-		: "memory");
-}
-
-void restore_fpu(struct task_struct *tsk)
-{
-	asm volatile("fld.p     %0, (0*8), fp0\n\t"
-		     "fld.p     %0, (1*8), fp2\n\t"
-		     "fld.p     %0, (2*8), fp4\n\t"
-		     "fld.p     %0, (3*8), fp6\n\t"
-		     "fld.p     %0, (4*8), fp8\n\t"
-		     "fld.p     %0, (5*8), fp10\n\t"
-		     "fld.p     %0, (6*8), fp12\n\t"
-		     "fld.p     %0, (7*8), fp14\n\t"
-		     "fld.p     %0, (8*8), fp16\n\t"
-		     "fld.p     %0, (9*8), fp18\n\t"
-		     "fld.p     %0, (10*8), fp20\n\t"
-		     "fld.p     %0, (11*8), fp22\n\t"
-		     "fld.p     %0, (12*8), fp24\n\t"
-		     "fld.p     %0, (13*8), fp26\n\t"
-		     "fld.p     %0, (14*8), fp28\n\t"
-		     "fld.p     %0, (15*8), fp30\n\t"
-		     "fld.p     %0, (16*8), fp32\n\t"
-		     "fld.p     %0, (17*8), fp34\n\t"
-		     "fld.p     %0, (18*8), fp36\n\t"
-		     "fld.p     %0, (19*8), fp38\n\t"
-		     "fld.p     %0, (20*8), fp40\n\t"
-		     "fld.p     %0, (21*8), fp42\n\t"
-		     "fld.p     %0, (22*8), fp44\n\t"
-		     "fld.p     %0, (23*8), fp46\n\t"
-		     "fld.p     %0, (24*8), fp48\n\t"
-		     "fld.p     %0, (25*8), fp50\n\t"
-		     "fld.p     %0, (26*8), fp52\n\t"
-		     "fld.p     %0, (27*8), fp54\n\t"
-		     "fld.p     %0, (28*8), fp56\n\t"
-		     "fld.p     %0, (29*8), fp58\n\t"
-		     "fld.p     %0, (30*8), fp60\n\t"
-
-		     "fld.s     %0, (32*8), fr63\n\t"
-		     "fputscr   fr63\n\t"
-
-		     "fld.p     %0, (31*8), fp62\n\t"
-		: /* no output */
-		: "r" (&tsk->thread.xstate->hardfpu)
-		: "memory");
-}
-
-asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs)
-{
-	regs->pc += 4;
-
-	force_sig(SIGFPE);
-}

arch/sh/kernel/cpu/sh5/probe.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/probe.c
- *
- * CPU Subtype Probing for SH-5.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/tlb.h>
-
-void cpu_probe(void)
-{
-	unsigned long long cir;
-
-	/*
-	 * Do peeks in real mode to avoid having to set up a mapping for
-	 * the WPC registers. On SH5-101 cut2, such a mapping would be
-	 * exposed to an address translation erratum which would make it
-	 * hard to set up correctly.
-	 */
-	cir = peek_real_address_q(0x0d000008);
-	if ((cir & 0xffff) == 0x5103)
-		boot_cpu_data.type = CPU_SH5_103;
-	else if (((cir >> 32) & 0xffff) == 0x51e2)
-		/* CPU.VCR aliased at CIR address on SH5-101 */
-		boot_cpu_data.type = CPU_SH5_101;
-
-	boot_cpu_data.family = CPU_FAMILY_SH5;
-
-	/*
-	 * First, setup some sane values for the I-cache.
-	 */
-	boot_cpu_data.icache.ways		= 4;
-	boot_cpu_data.icache.sets		= 256;
-	boot_cpu_data.icache.linesz		= L1_CACHE_BYTES;
-	boot_cpu_data.icache.way_incr		= (1 << 13);
-	boot_cpu_data.icache.entry_shift	= 5;
-	boot_cpu_data.icache.way_size		= boot_cpu_data.icache.sets *
-						  boot_cpu_data.icache.linesz;
-	boot_cpu_data.icache.entry_mask		= 0x1fe0;
-	boot_cpu_data.icache.flags		= 0;
-
-	/*
-	 * Next, setup some sane values for the D-cache.
-	 *
-	 * On the SH5, these are pretty consistent with the I-cache settings,
-	 * so we just copy over the existing definitions.. these can be fixed
-	 * up later, especially if we add runtime CPU probing.
-	 *
-	 * Though in the meantime it saves us from having to duplicate all of
-	 * the above definitions..
-	 */
-	boot_cpu_data.dcache		= boot_cpu_data.icache;
-
-	/*
-	 * Setup any cache-related flags here
-	 */
-#if defined(CONFIG_CACHE_WRITETHROUGH)
-	set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags));
-#elif defined(CONFIG_CACHE_WRITEBACK)
-	set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
-#endif
-
-	/* Setup some I/D TLB defaults */
-	sh64_tlb_init();
-}

arch/sh/kernel/cpu/sh5/setup-sh5.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH5-101/SH5-103 CPU Setup
- *
- *  Copyright (C) 2009  Paul Mundt
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/sh_timer.h>
-#include <asm/addrspace.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
-	.flags		= UPF_IOREMAP,
-	.scscr		= SCSCR_REIE,
-	.type		= PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
-	DEFINE_RES_MEM(PHYS_PERIPHERAL_BLOCK + 0x01030000, 0x100),
-	DEFINE_RES_IRQ(39),
-	DEFINE_RES_IRQ(40),
-	DEFINE_RES_IRQ(42),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.resource	= scif0_resources,
-	.num_resources	= ARRAY_SIZE(scif0_resources),
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= PHYS_PERIPHERAL_BLOCK + 0x01040000,
-		.end	= PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		/* Period IRQ */
-		.start	= IRQ_PRI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= IRQ_CUI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
-		.start	= IRQ_ATI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "sh-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-	.resource	= rtc_resources,
-};
-
-#define	TMU_BLOCK_OFF	0x01020000
-#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(TMU_BASE, 0x30),
-	DEFINE_RES_IRQ(IRQ_TUNI0),
-	DEFINE_RES_IRQ(IRQ_TUNI1),
-	DEFINE_RES_IRQ(IRQ_TUNI2),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh5_early_devices[] __initdata = {
-	&scif0_device,
-	&tmu0_device,
-};
-
-static struct platform_device *sh5_devices[] __initdata = {
-	&rtc_device,
-};
-
-static int __init sh5_devices_setup(void)
-{
-	int ret;
-
-	ret = platform_add_devices(sh5_early_devices,
-				   ARRAY_SIZE(sh5_early_devices));
-	if (unlikely(ret != 0))
-		return ret;
-
-	return platform_add_devices(sh5_devices,
-				    ARRAY_SIZE(sh5_devices));
-}
-arch_initcall(sh5_devices_setup);
-
-void __init plat_early_device_setup(void)
-{
-	sh_early_platform_add_devices(sh5_early_devices,
-				   ARRAY_SIZE(sh5_early_devices));
-}

arch/sh/kernel/cpu/sh5/switchto.S

-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/cpu/sh5/switchto.S
- *
- * sh64 context switch
- *
- * Copyright (C) 2004  Richard Curnow
-*/
-
-	.section .text..SHmedia32,"ax"
-	.little
-
-	.balign 32
-
-	.type sh64_switch_to,@function
-	.global sh64_switch_to
-	.global __sh64_switch_to_end
-sh64_switch_to:
-
-/* Incoming args
-   r2 - prev
-   r3 - &prev->thread
-   r4 - next
-   r5 - &next->thread
-
-   Outgoing results
-   r2 - last (=prev) : this just stays in r2 throughout
-
-   Want to create a full (struct pt_regs) on the stack to allow backtracing
-   functions to work.  However, we only need to populate the callee-save
-   register slots in this structure; since we're a function our ancestors must
-   have themselves preserved all caller saved state in the stack.  This saves
-   some wasted effort since we won't need to look at the values.
-
-   In particular, all caller-save registers are immediately available for
-   scratch use.
-
-*/
-
-#define FRAME_SIZE (76*8 + 8)
-
-	movi	FRAME_SIZE, r0
-	sub.l	r15, r0, r15
-	! Do normal-style register save to support backtrace
-
-	st.l	r15,   0, r18	! save link reg
-	st.l	r15,   4, r14	! save fp
-	add.l	r15, r63, r14	! setup frame pointer
-
-	! hopefully this looks normal to the backtrace now.
-
-	addi.l	r15,   8, r1    ! base of pt_regs
-	addi.l	r1,   24, r0    ! base of pt_regs.regs
-	addi.l	r0, (63*8), r8	! base of pt_regs.trregs
-
-	/* Note : to be fixed?
-	   struct pt_regs is really designed for holding the state on entry
-	   to an exception, i.e. pc,sr,regs etc.  However, for the context
-	   switch state, some of this is not required.  But the unwinder takes
-	   struct pt_regs * as an arg so we have to build this structure
-	   to allow unwinding switched tasks in show_state() */
-
-	st.q	r0, ( 9*8), r9
-	st.q	r0, (10*8), r10
-	st.q	r0, (11*8), r11
-	st.q	r0, (12*8), r12
-	st.q	r0, (13*8), r13
-	st.q	r0, (14*8), r14 ! for unwind, want to look as though we took a trap at
-	! the point where the process is left in suspended animation, i.e. current
-	! fp here, not the saved one.
-	st.q	r0, (16*8), r16
-
-	st.q	r0, (24*8), r24
-	st.q	r0, (25*8), r25
-	st.q	r0, (26*8), r26
-	st.q	r0, (27*8), r27
-	st.q	r0, (28*8), r28
-	st.q	r0, (29*8), r29
-	st.q	r0, (30*8), r30
-	st.q	r0, (31*8), r31
-	st.q	r0, (32*8), r32
-	st.q	r0, (33*8), r33
-	st.q	r0, (34*8), r34
-	st.q	r0, (35*8), r35
-
-	st.q	r0, (44*8), r44
-	st.q	r0, (45*8), r45
-	st.q	r0, (46*8), r46
-	st.q	r0, (47*8), r47
-	st.q	r0, (48*8), r48
-	st.q	r0, (49*8), r49
-	st.q	r0, (50*8), r50
-	st.q	r0, (51*8), r51
-	st.q	r0, (52*8), r52
-	st.q	r0, (53*8), r53
-	st.q	r0, (54*8), r54
-	st.q	r0, (55*8), r55
-	st.q	r0, (56*8), r56
-	st.q	r0, (57*8), r57
-	st.q	r0, (58*8), r58
-	st.q	r0, (59*8), r59
-
-	! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency)
-	! Use a local label to avoid creating a symbol that will confuse the !
-	! backtrace
-	pta	.Lsave_pc, tr0
-
-	gettr	tr5, r45
-	gettr	tr6, r46
-	gettr	tr7, r47
-	st.q	r8, (5*8), r45
-	st.q	r8, (6*8), r46
-	st.q	r8, (7*8), r47
-
-	! Now switch context
-	gettr	tr0, r9
-	st.l	r3, 0, r15	! prev->thread.sp
-	st.l	r3, 8, r1	! prev->thread.kregs
-	st.l	r3, 4, r9	! prev->thread.pc
-	st.q	r1, 0, r9	! save prev->thread.pc into pt_regs->pc
-
-	! Load PC for next task (init value or save_pc later)
-	ld.l	r5, 4, r18	! next->thread.pc
-	! Switch stacks
-	ld.l	r5, 0, r15	! next->thread.sp
-	ptabs	r18, tr0
-
-	! Update current
-	ld.l	r4, 4, r9	! next->thread_info (2nd element of next task_struct)
-	putcon	r9, kcr0	! current = next->thread_info
-
-	! go to save_pc for a reschedule, or the initial thread.pc for a new process
-	blink	tr0, r63
-
-	! Restore (when we come back to a previously saved task)
-.Lsave_pc:
-	addi.l	r15, 32, r0	! r0 = next's regs
-	addi.l	r0, (63*8), r8	! r8 = next's tr_regs
-
-	ld.q	r8, (5*8), r45
-	ld.q	r8, (6*8), r46
-	ld.q	r8, (7*8), r47
-	ptabs	r45, tr5
-	ptabs	r46, tr6
-	ptabs	r47, tr7
-
-	ld.q	r0, ( 9*8), r9
-	ld.q	r0, (10*8), r10
-	ld.q	r0, (11*8), r11
-	ld.q	r0, (12*8), r12
-	ld.q	r0, (13*8), r13
-	ld.q	r0, (14*8), r14
-	ld.q	r0, (16*8), r16
-
-	ld.q	r0, (24*8), r24
-	ld.q	r0, (25*8), r25
-	ld.q	r0, (26*8), r26
-	ld.q	r0, (27*8), r27
-	ld.q	r0, (28*8), r28
-	ld.q	r0, (29*8), r29
-	ld.q	r0, (30*8), r30
-	ld.q	r0, (31*8), r31
-	ld.q	r0, (32*8), r32
-	ld.q	r0, (33*8), r33
-	ld.q	r0, (34*8), r34
-	ld.q	r0, (35*8), r35
-
-	ld.q	r0, (44*8), r44
-	ld.q	r0, (45*8), r45
-	ld.q	r0, (46*8), r46
-	ld.q	r0, (47*8), r47
-	ld.q	r0, (48*8), r48
-	ld.q	r0, (49*8), r49
-	ld.q	r0, (50*8), r50
-	ld.q	r0, (51*8), r51
-	ld.q	r0, (52*8), r52
-	ld.q	r0, (53*8), r53
-	ld.q	r0, (54*8), r54
-	ld.q	r0, (55*8), r55
-	ld.q	r0, (56*8), r56
-	ld.q	r0, (57*8), r57
-	ld.q	r0, (58*8), r58
-	ld.q	r0, (59*8), r59
-
-	! epilogue
-	ld.l	r15, 0, r18
-	ld.l	r15, 4, r14
-	ptabs	r18, tr0
-	movi	FRAME_SIZE, r0
-	add	r15, r0, r15
-	blink	tr0, r63
-__sh64_switch_to_end:
-.LFE1:
-	.size	sh64_switch_to,.LFE1-sh64_switch_to
-

arch/sh/kernel/cpu/sh5/unwind.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh5/unwind.c
- *
- * Copyright (C) 2004  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#include <linux/kallsyms.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/unwinder.h>
-#include <asm/stacktrace.h>
-
-static u8 regcache[63];
-
-/*
- * Finding the previous stack frame isn't horribly straightforward as it is
- * on some other platforms. In the sh64 case, we don't have "linked" stack
- * frames, so we need to do a bit of work to determine the previous frame,
- * and in turn, the previous r14/r18 pair.
- *
- * There are generally a few cases which determine where we can find out
- * the r14/r18 values. In the general case, this can be determined by poking
- * around the prologue of the symbol PC is in (note that we absolutely must
- * have frame pointer support as well as the kernel symbol table mapped,
- * otherwise we can't even get this far).
- *
- * In other cases, such as the interrupt/exception path, we can poke around
- * the sp/fp.
- *
- * Notably, this entire approach is somewhat error prone, and in the event
- * that the previous frame cannot be determined, that's all we can do.
- * Either way, this still leaves us with a more correct backtrace then what
- * we would be able to come up with by walking the stack (which is garbage
- * for anything beyond the first frame).
- *						-- PFM.
- */
-static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
-		      unsigned long *pprev_fp, unsigned long *pprev_pc,
-		      struct pt_regs *regs)
-{
-	const char *sym;
-	char namebuf[128];
-	unsigned long offset;
-	unsigned long prologue = 0;
-	unsigned long fp_displacement = 0;
-	unsigned long fp_prev = 0;
-	unsigned long offset_r14 = 0, offset_r18 = 0;
-	int i, found_prologue_end = 0;
-
-	sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf);
-	if (!sym)
-		return -EINVAL;
-
-	prologue = pc - offset;
-	if (!prologue)
-		return -EINVAL;
-
-	/* Validate fp, to avoid risk of dereferencing a bad pointer later.
-	   Assume 128Mb since that's the amount of RAM on a Cayman.  Modify
-	   when there is an SH-5 board with more. */
-	if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) ||
-	    (fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) ||
-	    ((fp & 7) != 0)) {
-		return -EINVAL;
-	}
-
-	/*
-	 * Depth to walk, depth is completely arbitrary.
-	 */
-	for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) {
-		unsigned long op;
-		u8 major, minor;
-		u8 src, dest, disp;
-
-		op = *(unsigned long *)prologue;
-
-		major = (op >> 26) & 0x3f;
-		src   = (op >> 20) & 0x3f;
-		minor = (op >> 16) & 0xf;
-		disp  = (op >> 10) & 0x3f;
-		dest  = (op >>  4) & 0x3f;
-
-		/*
-		 * Stack frame creation happens in a number of ways.. in the
-		 * general case when the stack frame is less than 511 bytes,
-		 * it's generally created by an addi or addi.l:
-		 *
-		 *	addi/addi.l r15, -FRAME_SIZE, r15
-		 *
-		 * in the event that the frame size is bigger than this, it's
-		 * typically created using a movi/sub pair as follows:
-		 *
-		 *	movi	FRAME_SIZE, rX
-		 *	sub	r15, rX, r15
-		 */
-
-		switch (major) {
-		case (0x00 >> 2):
-			switch (minor) {
-			case 0x8: /* add.l */
-			case 0x9: /* add */
-				/* Look for r15, r63, r14 */
-				if (src == 15 && disp == 63 && dest == 14)
-					found_prologue_end = 1;
-
-				break;
-			case 0xa: /* sub.l */
-			case 0xb: /* sub */
-				if (src != 15 || dest != 15)
-					continue;
-
-				fp_displacement -= regcache[disp];
-				fp_prev = fp - fp_displacement;
-				break;
-			}
-			break;
-		case (0xa8 >> 2): /* st.l */
-			if (src != 15)
-				continue;
-
-			switch (dest) {
-			case 14:
-				if (offset_r14 || fp_displacement == 0)
-					continue;
-
-				offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
-				offset_r14 *= sizeof(unsigned long);
-				offset_r14 += fp_displacement;
-				break;
-			case 18:
-				if (offset_r18 || fp_displacement == 0)
-					continue;
-
-				offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
-				offset_r18 *= sizeof(unsigned long);
-				offset_r18 += fp_displacement;
-				break;
-			}
-
-			break;
-		case (0xcc >> 2): /* movi */
-			if (dest >= 63) {
-				printk(KERN_NOTICE "%s: Invalid dest reg %d "
-				       "specified in movi handler. Failed "
-				       "opcode was 0x%lx: ", __func__,
-				       dest, op);
-
-				continue;
-			}
-
-			/* Sign extend */
-			regcache[dest] =
-				sign_extend64((((u64)op >> 10) & 0xffff), 9);
-			break;
-		case (0xd0 >> 2): /* addi */
-		case (0xd4 >> 2): /* addi.l */
-			/* Look for r15, -FRAME_SIZE, r15 */
-			if (src != 15 || dest != 15)
-				continue;
-
-			/* Sign extended frame size.. */
-			fp_displacement +=
-				(u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54);
-			fp_prev = fp - fp_displacement;
-			break;
-		}
-
-		if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev)
-			break;
-	}
-
-	if (offset_r14 == 0 || fp_prev == 0) {
-		if (!offset_r14)
-			pr_debug("Unable to find r14 offset\n");
-		if (!fp_prev)
-			pr_debug("Unable to find previous fp\n");
-
-		return -EINVAL;
-	}
-
-	/* For innermost leaf function, there might not be a offset_r18 */
-	if (!*pprev_pc && (offset_r18 == 0))
-		return -EINVAL;
-
-	*pprev_fp = *(unsigned long *)(fp_prev + offset_r14);
-
-	if (offset_r18)
-		*pprev_pc = *(unsigned long *)(fp_prev + offset_r18);
-
-	*pprev_pc &= ~1;
-
-	return 0;
-}
-
-/*
- * Don't put this on the stack since we'll want to call in to
- * sh64_unwinder_dump() when we're close to underflowing the stack
- * anyway.
- */
-static struct pt_regs here_regs;
-
-extern const char syscall_ret;
-extern const char ret_from_syscall;
-extern const char ret_from_exception;
-extern const char ret_from_irq;
-
-static void sh64_unwind_inner(const struct stacktrace_ops *ops,
-			      void *data, struct pt_regs *regs);
-
-static inline void unwind_nested(const struct stacktrace_ops *ops, void *data,
-				 unsigned long pc, unsigned long fp)
-{
-	if ((fp >= __MEMORY_START) &&
-	    ((fp & 7) == 0))
-		sh64_unwind_inner(ops, data, (struct pt_regs *)fp);
-}
-
-static void sh64_unwind_inner(const struct stacktrace_ops *ops,
-			      void *data, struct pt_regs *regs)
-{
-	unsigned long pc, fp;
-	int ofs = 0;
-	int first_pass;
-
-	pc = regs->pc & ~1;
-	fp = regs->regs[14];
-
-	first_pass = 1;
-	for (;;) {
-		int cond;
-		unsigned long next_fp, next_pc;
-
-		if (pc == ((unsigned long)&syscall_ret & ~1)) {
-			printk("SYSCALL\n");
-			unwind_nested(ops, data, pc, fp);
-			return;
-		}
-
-		if (pc == ((unsigned long)&ret_from_syscall & ~1)) {
-			printk("SYSCALL (PREEMPTED)\n");
-			unwind_nested(ops, data, pc, fp);
-			return;
-		}
-
-		/* In this case, the PC is discovered by lookup_prev_stack_frame but
-		   it has 4 taken off it to look like the 'caller' */
-		if (pc == ((unsigned long)&ret_from_exception & ~1)) {
-			printk("EXCEPTION\n");
-			unwind_nested(ops, data, pc, fp);
-			return;
-		}
-
-		if (pc == ((unsigned long)&ret_from_irq & ~1)) {
-			printk("IRQ\n");
-			unwind_nested(ops, data, pc, fp);
-			return;
-		}
-
-		cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) &&
-			((pc & 3) == 0) && ((fp & 7) == 0));
-
-		pc -= ofs;
-
-		ops->address(data, pc, 1);
-
-		if (first_pass) {
-			/* If the innermost frame is a leaf function, it's
-			 * possible that r18 is never saved out to the stack.
-			 */
-			next_pc = regs->regs[18];
-		} else {
-			next_pc = 0;
-		}
-
-		if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) {
-			ofs = sizeof(unsigned long);
-			pc = next_pc & ~1;
-			fp = next_fp;
-		} else {
-			printk("Unable to lookup previous stack frame\n");
-			break;
-		}
-		first_pass = 0;
-	}
-
-	printk("\n");
-}
-
-static void sh64_unwinder_dump(struct task_struct *task,
-			       struct pt_regs *regs,
-			       unsigned long *sp,
-			       const struct stacktrace_ops *ops,
-			       void *data)
-{
-	if (!regs) {
-		/*
-		 * Fetch current regs if we have no other saved state to back
-		 * trace from.
-		 */
-		regs = &here_regs;
-
-		__asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14]));
-		__asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15]));
-		__asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18]));
-
-		__asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0]));
-		__asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1]));
-		__asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2]));
-		__asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3]));
-		__asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4]));
-		__asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5]));
-		__asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6]));
-		__asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7]));
-
-		__asm__ __volatile__ (
-			"pta 0f, tr0\n\t"
-			"blink tr0, %0\n\t"
-			"0: nop"
-			: "=r" (regs->pc)
-		);
-	}
-
-	sh64_unwind_inner(ops, data, regs);
-}
-
-static struct unwinder sh64_unwinder = {
-	.name	= "sh64-unwinder",
-	.dump	= sh64_unwinder_dump,
-	.rating	= 150,
-};
-
-static int __init sh64_unwinder_init(void)
-{
-	return unwinder_register(&sh64_unwinder);
-}
-early_initcall(sh64_unwinder_init);

arch/sh/kernel/head_64.S

-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/head_64.S
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- */
-
-#include <linux/init.h>
-
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/tlb.h>
-#include <cpu/registers.h>
-#include <cpu/mmu_context.h>
-#include <asm/thread_info.h>
-
-/*
- * MMU defines: TLB boundaries.
- */
-
-#define MMUIR_FIRST	ITLB_FIXED
-#define MMUIR_END	ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP
-#define MMUIR_STEP	TLB_STEP
-
-#define MMUDR_FIRST	DTLB_FIXED
-#define MMUDR_END	DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP
-#define MMUDR_STEP	TLB_STEP
-
-/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */
-#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1))
-#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb"
-#endif
-
-/*
- * MMU defines: Fixed TLBs.
- */
-/* Deal safely with the case where the base of RAM is not 512Mb aligned */
-
-#define ALIGN_512M_MASK (0xffffffffe0000000)
-#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK)
-#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK)
-
-#define MMUIR_TEXT_H	(0x0000000000000003 | ALIGNED_EFFECTIVE)
-			/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-
-#define MMUIR_TEXT_L	(0x000000000000009a | ALIGNED_PHYSICAL)
-			/* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */
-
-#define MMUDR_CACHED_H	0x0000000000000003 | ALIGNED_EFFECTIVE
-			/* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */
-#define MMUDR_CACHED_L	0x000000000000015a | ALIGNED_PHYSICAL
-			/* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */
-
-#ifdef CONFIG_CACHE_OFF
-#define	ICCR0_INIT_VAL	ICCR0_OFF			/* ICACHE off */
-#else
-#define	ICCR0_INIT_VAL	ICCR0_ON | ICCR0_ICI		/* ICE + ICI */
-#endif
-#define	ICCR1_INIT_VAL	ICCR1_NOLOCK			/* No locking */
-
-#if defined (CONFIG_CACHE_OFF)
-#define	OCCR0_INIT_VAL	OCCR0_OFF			   /* D-cache: off  */
-#elif defined (CONFIG_CACHE_WRITETHROUGH)
-#define	OCCR0_INIT_VAL	OCCR0_ON | OCCR0_OCI | OCCR0_WT	   /* D-cache: on,   */
-							   /* WT, invalidate */
-#elif defined (CONFIG_CACHE_WRITEBACK)
-#define	OCCR0_INIT_VAL	OCCR0_ON | OCCR0_OCI | OCCR0_WB	   /* D-cache: on,   */
-							   /* WB, invalidate */
-#else
-#error preprocessor flag CONFIG_CACHE_... not recognized!
-#endif
-
-#define	OCCR1_INIT_VAL	OCCR1_NOLOCK			   /* No locking     */
-
-	.section	.empty_zero_page, "aw"
-	.global empty_zero_page
-
-empty_zero_page:
-	.long	1		/* MOUNT_ROOT_RDONLY */
-	.long	0		/* RAMDISK_FLAGS */
-	.long	0x0200		/* ORIG_ROOT_DEV */
-	.long	1		/* LOADER_TYPE */
-	.long	0x00800000	/* INITRD_START */
-	.long	0x00800000	/* INITRD_SIZE */
-	.long	0
-
-	.text
-	.balign 4096,0,4096
-
-	.section	.data, "aw"
-	.balign	PAGE_SIZE
-
-	.section	.data, "aw"
-	.balign	PAGE_SIZE
-
-	.global mmu_pdtp_cache
-mmu_pdtp_cache:
-	.space PAGE_SIZE, 0
-
-	.global	fpu_in_use
-fpu_in_use:	.quad	0
-
-
-	__HEAD
-	.balign L1_CACHE_BYTES
-/*
- * Condition at the entry of __stext:
- * . Reset state:
- *   . SR.FD    = 1		(FPU disabled)
- *   . SR.BL    = 1		(Exceptions disabled)
- *   . SR.MD    = 1		(Privileged Mode)
- *   . SR.MMU   = 0		(MMU Disabled)
- *   . SR.CD    = 0		(CTC User Visible)
- *   . SR.IMASK = Undefined	(Interrupt Mask)
- *
- * Operations supposed to be performed by __stext:
- * . prevent speculative fetch onto device memory while MMU is off
- * . reflect as much as possible SH5 ABI (r15, r26, r27, r18)
- * . first, save CPU state and set it to something harmless
- * . any CPU detection and/or endianness settings (?)
- * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD
- * . set initial TLB entries for cached and uncached regions
- *   (no fine granularity paging)
- * . set initial cache state
- * . enable MMU and caches
- * . set CPU to a consistent state
- *   . registers (including stack pointer and current/KCR0)
- *   . NOT expecting to set Exception handling nor VBR/RESVEC/DCR
- *     at this stage. This is all to later Linux initialization steps.
- *   . initialize FPU
- * . clear BSS
- * . jump into start_kernel()
- * . be prepared to hopeless start_kernel() returns.
- *
- */
-	.global _stext
-_stext:
-	/*
-	 * Prevent speculative fetch on device memory due to
-	 * uninitialized target registers.
-	 */
-	ptabs/u	ZERO, tr0
-	ptabs/u	ZERO, tr1
-	ptabs/u	ZERO, tr2
-	ptabs/u	ZERO, tr3
-	ptabs/u	ZERO, tr4
-	ptabs/u	ZERO, tr5
-	ptabs/u	ZERO, tr6
-	ptabs/u	ZERO, tr7
-	synci
-
-	/*
-	 * Read/Set CPU state. After this block:
-	 * r29 = Initial SR
-	 */
-	getcon	SR, r29
-	movi	SR_HARMLESS, r20
-	putcon	r20, SR
-
-	/*
-	 * Initialize EMI/LMI. To Be Done.
-	 */
-
-	/*
-	 * CPU detection and/or endianness settings (?). To Be Done.
-	 * Pure PIC code here, please ! Just save state into r30.
-         * After this block:
-	 * r30 = CPU type/Platform Endianness
-	 */
-
-	/*
-	 * Set initial TLB entries for cached and uncached regions.
-	 * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't !
-	 */
-	/* Clear ITLBs */
-	pta	clear_ITLB, tr1
-	movi	MMUIR_FIRST, r21
-	movi	MMUIR_END, r22
-clear_ITLB:
-	putcfg	r21, 0, ZERO		/* Clear MMUIR[n].PTEH.V */
-	addi	r21, MMUIR_STEP, r21
-        bne	r21, r22, tr1
-
-	/* Clear DTLBs */
-	pta	clear_DTLB, tr1
-	movi	MMUDR_FIRST, r21
-	movi	MMUDR_END, r22
-clear_DTLB:
-	putcfg	r21, 0, ZERO		/* Clear MMUDR[n].PTEH.V */
-	addi	r21, MMUDR_STEP, r21
-        bne	r21, r22, tr1
-
-	/* Map one big (512Mb) page for ITLB */
-	movi	MMUIR_FIRST, r21
-	movi	MMUIR_TEXT_L, r22	/* PTEL first */
-	add.l	r22, r63, r22		/* Sign extend */
-	putcfg	r21, 1, r22		/* Set MMUIR[0].PTEL */
-	movi	MMUIR_TEXT_H, r22	/* PTEH last */
-	add.l	r22, r63, r22		/* Sign extend */
-	putcfg	r21, 0, r22		/* Set MMUIR[0].PTEH */
-
-	/* Map one big CACHED (512Mb) page for DTLB */
-	movi	MMUDR_FIRST, r21
-	movi	MMUDR_CACHED_L, r22	/* PTEL first */
-	add.l	r22, r63, r22		/* Sign extend */
-	putcfg	r21, 1, r22		/* Set MMUDR[0].PTEL */
-	movi	MMUDR_CACHED_H, r22	/* PTEH last */
-	add.l	r22, r63, r22		/* Sign extend */
-	putcfg	r21, 0, r22		/* Set MMUDR[0].PTEH */
-
-	/*
-	 * Setup a DTLB translation for SCIF phys.
-	 */
-	addi    r21, MMUDR_STEP, r21
-	movi    0x0a03, r22	/* SCIF phys */
-	shori   0x0148, r22
-	putcfg  r21, 1, r22	/* PTEL first */
-	movi    0xfa03, r22	/* 0xfa030000, fixed SCIF virt */
-	shori   0x0003, r22
-	putcfg  r21, 0, r22	/* PTEH last */
-
-	/*
-	 * Set cache behaviours.
-	 */
-	/* ICache */
-	movi	ICCR_BASE, r21
-	movi	ICCR0_INIT_VAL, r22
-	movi	ICCR1_INIT_VAL, r23
-	putcfg	r21, ICCR_REG0, r22
-	putcfg	r21, ICCR_REG1, r23
-
-	/* OCache */
-	movi	OCCR_BASE, r21
-	movi	OCCR0_INIT_VAL, r22
-	movi	OCCR1_INIT_VAL, r23
-	putcfg	r21, OCCR_REG0, r22
-	putcfg	r21, OCCR_REG1, r23
-
-
-	/*
-	 * Enable Caches and MMU. Do the first non-PIC jump.
-         * Now head.S global variables, constants and externs
-	 * can be used.
-	 */
-	getcon	SR, r21
-	movi	SR_ENABLE_MMU, r22
-	or	r21, r22, r21
-	putcon	r21, SSR
-	movi	hyperspace, r22
-	ori	r22, 1, r22	    /* Make it SHmedia, not required but..*/
-	putcon	r22, SPC
-	synco
-	rte			    /* And now go into the hyperspace ... */
-hyperspace:			    /* ... that's the next instruction !  */
-
-	/*
-	 * Set CPU to a consistent state.
-	 * r31 = FPU support flag
-	 * tr0/tr7 in use. Others give a chance to loop somewhere safe
-	 */
-	movi	start_kernel, r32
-	ori	r32, 1, r32
-
-	ptabs	r32, tr0		    /* r32 = _start_kernel address        */
-	pta/u	hopeless, tr1
-	pta/u	hopeless, tr2
-	pta/u	hopeless, tr3
-	pta/u	hopeless, tr4
-	pta/u	hopeless, tr5
-	pta/u	hopeless, tr6
-	pta/u	hopeless, tr7
-	gettr	tr1, r28			/* r28 = hopeless address */
-
-	/* Set initial stack pointer */
-	movi	init_thread_union, SP
-	putcon	SP, KCR0		/* Set current to init_task */
-	movi	THREAD_SIZE, r22	/* Point to the end */
-	add	SP, r22, SP
-
-	/*
-	 * Initialize FPU.
-	 * Keep FPU flag in r31. After this block:
-	 * r31 = FPU flag
-	 */
-	movi fpu_in_use, r31	/* Temporary */
-
-#ifdef CONFIG_SH_FPU
-	getcon	SR, r21
-	movi	SR_ENABLE_FPU, r22
-	and	r21, r22, r22
-	putcon	r22, SR			/* Try to enable */
-	getcon	SR, r22
-	xor	r21, r22, r21
-	shlri	r21, 15, r21		/* Supposedly 0/1 */
-	st.q	r31, 0 , r21		/* Set fpu_in_use */
-#else
-	movi	0, r21
-	st.q	r31, 0 , r21		/* Set fpu_in_use */
-#endif
-	or	r21, ZERO, r31		/* Set FPU flag at last */
-
-#ifndef CONFIG_SH_NO_BSS_INIT
-/* Don't clear BSS if running on slow platforms such as an RTL simulation,
-   remote memory via SHdebug link, etc.  For these the memory can be guaranteed
-   to be all zero on boot anyway. */
-	/*
-	 * Clear bss
-	 */
-	pta	clear_quad, tr1
-	movi	__bss_start, r22
-	movi	_end, r23
-clear_quad:
-	st.q	r22, 0, ZERO
-	addi	r22, 8, r22
-	bne	r22, r23, tr1		/* Both quad aligned, see vmlinux.lds.S */
-#endif
-	pta/u	hopeless, tr1
-
-	/* Say bye to head.S but be prepared to wrongly get back ... */
-	blink	tr0, LINK
-
-	/* If we ever get back here through LINK/tr1-tr7 */
-	pta/u	hopeless, tr7
-
-hopeless:
-	/*
-	 * Something's badly wrong here. Loop endlessly,
-         * there's nothing more we can do about it.
-	 *
-	 * Note on hopeless: it can be jumped into invariably
-	 * before or after jumping into hyperspace. The only
-	 * requirement is to be PIC called (PTA) before and
-	 * any way (PTA/PTABS) after. According to Virtual
-	 * to Physical mapping a simulator/emulator can easily
-	 * tell where we came here from just looking at hopeless
-	 * (PC) address.
-	 *
-	 * For debugging purposes:
-	 * (r28) hopeless/loop address
-	 * (r29) Original SR
-	 * (r30) CPU type/Platform endianness
-	 * (r31) FPU Support
-	 * (r32) _start_kernel address
-	 */
-	blink	tr7, ZERO

arch/sh/kernel/irq_64.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * SHmedia irqflags support
- *
- * Copyright (C) 2006 - 2009 Paul Mundt
- */
-#include <linux/irqflags.h>
-#include <linux/module.h>
-#include <cpu/registers.h>
-
-void notrace arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long long __dummy;
-
-	if (flags == ARCH_IRQ_DISABLED) {
-		__asm__ __volatile__ (
-			"getcon	" __SR ", %0\n\t"
-			"or	%0, %1, %0\n\t"
-			"putcon	%0, " __SR "\n\t"
-			: "=&r" (__dummy)
-			: "r" (ARCH_IRQ_DISABLED)
-		);
-	} else {
-		__asm__ __volatile__ (
-			"getcon	" __SR ", %0\n\t"
-			"and	%0, %1, %0\n\t"
-			"putcon	%0, " __SR "\n\t"
-			: "=&r" (__dummy)
-			: "r" (~ARCH_IRQ_DISABLED)
-		);
-	}
-}
-EXPORT_SYMBOL(arch_local_irq_restore);
-
-unsigned long notrace arch_local_save_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %0\n\t"
-		"and	%0, %1, %0"
-		: "=&r" (flags)
-		: "r" (ARCH_IRQ_DISABLED)
-	);
-
-	return flags;
-}
-EXPORT_SYMBOL(arch_local_save_flags);

arch/sh/kernel/module.c

@@ -46,15 +46,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 			+ ELF32_R_SYM(rel[i].r_info);
 		relocation = sym->st_value + rel[i].r_addend;
 
-#ifdef CONFIG_SUPERH64
-		/* For text addresses, bit2 of the st_other field indicates
-		 * whether the symbol is SHmedia (1) or SHcompact (0).  If
-		 * SHmedia, the LSB of the symbol needs to be asserted
-		 * for the CPU to be in SHmedia mode when it starts executing
-		 * the branch target. */
-		relocation |= !!(sym->st_other & 4);
-#endif
-
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 		case R_SH_NONE:
 			break;

arch/sh/kernel/process.c

@@ -23,9 +23,7 @@ EXPORT_SYMBOL(__stack_chk_guard);
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-#ifdef CONFIG_SUPERH32
 	unlazy_fpu(src, task_pt_regs(src));
-#endif
 	*dst = *src;
 
 	if (src->thread.xstate) {

arch/sh/kernel/process_64.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/process_64.c
- *
- * This file handles the architecture-dependent parts of process handling..
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- *
- * Started from SH3/4 version:
- *   Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
- *
- *   In turn started from i386 version:
- *     Copyright (C) 1995  Linus Torvalds
- */
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/ptrace.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <asm/syscalls.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/mmu_context.h>
-#include <asm/fpu.h>
-#include <asm/switch_to.h>
-
-struct task_struct *last_task_used_math = NULL;
-struct pt_regs fake_swapper_regs = { 0, };
-
-void show_regs(struct pt_regs *regs)
-{
-	unsigned long long ah, al, bh, bl, ch, cl;
-
-	printk("\n");
-	show_regs_print_info(KERN_DEFAULT);
-
-	ah = (regs->pc) >> 32;
-	al = (regs->pc) & 0xffffffff;
-	bh = (regs->regs[18]) >> 32;
-	bl = (regs->regs[18]) & 0xffffffff;
-	ch = (regs->regs[15]) >> 32;
-	cl = (regs->regs[15]) & 0xffffffff;
-	printk("PC  : %08Lx%08Lx LINK: %08Lx%08Lx SP  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->sr) >> 32;
-	al = (regs->sr) & 0xffffffff;
-        asm volatile ("getcon   " __TEA ", %0" : "=r" (bh));
-        asm volatile ("getcon   " __TEA ", %0" : "=r" (bl));
-	bh = (bh) >> 32;
-	bl = (bl) & 0xffffffff;
-        asm volatile ("getcon   " __KCR0 ", %0" : "=r" (ch));
-        asm volatile ("getcon   " __KCR0 ", %0" : "=r" (cl));
-	ch = (ch) >> 32;
-	cl = (cl) & 0xffffffff;
-	printk("SR  : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[0]) >> 32;
-	al = (regs->regs[0]) & 0xffffffff;
-	bh = (regs->regs[1]) >> 32;
-	bl = (regs->regs[1]) & 0xffffffff;
-	ch = (regs->regs[2]) >> 32;
-	cl = (regs->regs[2]) & 0xffffffff;
-	printk("R0  : %08Lx%08Lx R1  : %08Lx%08Lx R2  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[3]) >> 32;
-	al = (regs->regs[3]) & 0xffffffff;
-	bh = (regs->regs[4]) >> 32;
-	bl = (regs->regs[4]) & 0xffffffff;
-	ch = (regs->regs[5]) >> 32;
-	cl = (regs->regs[5]) & 0xffffffff;
-	printk("R3  : %08Lx%08Lx R4  : %08Lx%08Lx R5  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[6]) >> 32;
-	al = (regs->regs[6]) & 0xffffffff;
-	bh = (regs->regs[7]) >> 32;
-	bl = (regs->regs[7]) & 0xffffffff;
-	ch = (regs->regs[8]) >> 32;
-	cl = (regs->regs[8]) & 0xffffffff;
-	printk("R6  : %08Lx%08Lx R7  : %08Lx%08Lx R8  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[9]) >> 32;
-	al = (regs->regs[9]) & 0xffffffff;
-	bh = (regs->regs[10]) >> 32;
-	bl = (regs->regs[10]) & 0xffffffff;
-	ch = (regs->regs[11]) >> 32;
-	cl = (regs->regs[11]) & 0xffffffff;
-	printk("R9  : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[12]) >> 32;
-	al = (regs->regs[12]) & 0xffffffff;
-	bh = (regs->regs[13]) >> 32;
-	bl = (regs->regs[13]) & 0xffffffff;
-	ch = (regs->regs[14]) >> 32;
-	cl = (regs->regs[14]) & 0xffffffff;
-	printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[16]) >> 32;
-	al = (regs->regs[16]) & 0xffffffff;
-	bh = (regs->regs[17]) >> 32;
-	bl = (regs->regs[17]) & 0xffffffff;
-	ch = (regs->regs[19]) >> 32;
-	cl = (regs->regs[19]) & 0xffffffff;
-	printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[20]) >> 32;
-	al = (regs->regs[20]) & 0xffffffff;
-	bh = (regs->regs[21]) >> 32;
-	bl = (regs->regs[21]) & 0xffffffff;
-	ch = (regs->regs[22]) >> 32;
-	cl = (regs->regs[22]) & 0xffffffff;
-	printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[23]) >> 32;
-	al = (regs->regs[23]) & 0xffffffff;
-	bh = (regs->regs[24]) >> 32;
-	bl = (regs->regs[24]) & 0xffffffff;
-	ch = (regs->regs[25]) >> 32;
-	cl = (regs->regs[25]) & 0xffffffff;
-	printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[26]) >> 32;
-	al = (regs->regs[26]) & 0xffffffff;
-	bh = (regs->regs[27]) >> 32;
-	bl = (regs->regs[27]) & 0xffffffff;
-	ch = (regs->regs[28]) >> 32;
-	cl = (regs->regs[28]) & 0xffffffff;
-	printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[29]) >> 32;
-	al = (regs->regs[29]) & 0xffffffff;
-	bh = (regs->regs[30]) >> 32;
-	bl = (regs->regs[30]) & 0xffffffff;
-	ch = (regs->regs[31]) >> 32;
-	cl = (regs->regs[31]) & 0xffffffff;
-	printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[32]) >> 32;
-	al = (regs->regs[32]) & 0xffffffff;
-	bh = (regs->regs[33]) >> 32;
-	bl = (regs->regs[33]) & 0xffffffff;
-	ch = (regs->regs[34]) >> 32;
-	cl = (regs->regs[34]) & 0xffffffff;
-	printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[35]) >> 32;
-	al = (regs->regs[35]) & 0xffffffff;
-	bh = (regs->regs[36]) >> 32;
-	bl = (regs->regs[36]) & 0xffffffff;
-	ch = (regs->regs[37]) >> 32;
-	cl = (regs->regs[37]) & 0xffffffff;
-	printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[38]) >> 32;
-	al = (regs->regs[38]) & 0xffffffff;
-	bh = (regs->regs[39]) >> 32;
-	bl = (regs->regs[39]) & 0xffffffff;
-	ch = (regs->regs[40]) >> 32;
-	cl = (regs->regs[40]) & 0xffffffff;
-	printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[41]) >> 32;
-	al = (regs->regs[41]) & 0xffffffff;
-	bh = (regs->regs[42]) >> 32;
-	bl = (regs->regs[42]) & 0xffffffff;
-	ch = (regs->regs[43]) >> 32;
-	cl = (regs->regs[43]) & 0xffffffff;
-	printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[44]) >> 32;
-	al = (regs->regs[44]) & 0xffffffff;
-	bh = (regs->regs[45]) >> 32;
-	bl = (regs->regs[45]) & 0xffffffff;
-	ch = (regs->regs[46]) >> 32;
-	cl = (regs->regs[46]) & 0xffffffff;
-	printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[47]) >> 32;
-	al = (regs->regs[47]) & 0xffffffff;
-	bh = (regs->regs[48]) >> 32;
-	bl = (regs->regs[48]) & 0xffffffff;
-	ch = (regs->regs[49]) >> 32;
-	cl = (regs->regs[49]) & 0xffffffff;
-	printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[50]) >> 32;
-	al = (regs->regs[50]) & 0xffffffff;
-	bh = (regs->regs[51]) >> 32;
-	bl = (regs->regs[51]) & 0xffffffff;
-	ch = (regs->regs[52]) >> 32;
-	cl = (regs->regs[52]) & 0xffffffff;
-	printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[53]) >> 32;
-	al = (regs->regs[53]) & 0xffffffff;
-	bh = (regs->regs[54]) >> 32;
-	bl = (regs->regs[54]) & 0xffffffff;
-	ch = (regs->regs[55]) >> 32;
-	cl = (regs->regs[55]) & 0xffffffff;
-	printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[56]) >> 32;
-	al = (regs->regs[56]) & 0xffffffff;
-	bh = (regs->regs[57]) >> 32;
-	bl = (regs->regs[57]) & 0xffffffff;
-	ch = (regs->regs[58]) >> 32;
-	cl = (regs->regs[58]) & 0xffffffff;
-	printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[59]) >> 32;
-	al = (regs->regs[59]) & 0xffffffff;
-	bh = (regs->regs[60]) >> 32;
-	bl = (regs->regs[60]) & 0xffffffff;
-	ch = (regs->regs[61]) >> 32;
-	cl = (regs->regs[61]) & 0xffffffff;
-	printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->regs[62]) >> 32;
-	al = (regs->regs[62]) & 0xffffffff;
-	bh = (regs->tregs[0]) >> 32;
-	bl = (regs->tregs[0]) & 0xffffffff;
-	ch = (regs->tregs[1]) >> 32;
-	cl = (regs->tregs[1]) & 0xffffffff;
-	printk("R62 : %08Lx%08Lx T0  : %08Lx%08Lx T1  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->tregs[2]) >> 32;
-	al = (regs->tregs[2]) & 0xffffffff;
-	bh = (regs->tregs[3]) >> 32;
-	bl = (regs->tregs[3]) & 0xffffffff;
-	ch = (regs->tregs[4]) >> 32;
-	cl = (regs->tregs[4]) & 0xffffffff;
-	printk("T2  : %08Lx%08Lx T3  : %08Lx%08Lx T4  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	ah = (regs->tregs[5]) >> 32;
-	al = (regs->tregs[5]) & 0xffffffff;
-	bh = (regs->tregs[6]) >> 32;
-	bl = (regs->tregs[6]) & 0xffffffff;
-	ch = (regs->tregs[7]) >> 32;
-	cl = (regs->tregs[7]) & 0xffffffff;
-	printk("T5  : %08Lx%08Lx T6  : %08Lx%08Lx T7  : %08Lx%08Lx\n",
-	       ah, al, bh, bl, ch, cl);
-
-	/*
-	 * If we're in kernel mode, dump the stack too..
-	 */
-	if (!user_mode(regs)) {
-		void show_stack(struct task_struct *tsk, unsigned long *sp);
-		unsigned long sp = regs->regs[15] & 0xffffffff;
-		struct task_struct *tsk = get_current();
-
-		tsk->thread.kregs = regs;
-
-		show_stack(tsk, (unsigned long *)sp);
-	}
-}
-
-/*
- * Free current thread data structures etc..
- */
-void exit_thread(struct task_struct *tsk)
-{
-	/*
-	 * See arch/sparc/kernel/process.c for the precedent for doing
-	 * this -- RPC.
-	 *
-	 * The SH-5 FPU save/restore approach relies on
-	 * last_task_used_math pointing to a live task_struct.  When
-	 * another task tries to use the FPU for the 1st time, the FPUDIS
-	 * trap handling (see arch/sh/kernel/cpu/sh5/fpu.c) will save the
-	 * existing FPU state to the FP regs field within
-	 * last_task_used_math before re-loading the new task's FPU state
-	 * (or initialising it if the FPU has been used before).  So if
-	 * last_task_used_math is stale, and its page has already been
-	 * re-allocated for another use, the consequences are rather
-	 * grim. Unless we null it here, there is no other path through
-	 * which it would get safely nulled.
-	 */
-#ifdef CONFIG_SH_FPU
-	if (last_task_used_math == tsk)
-		last_task_used_math = NULL;
-#endif
-}
-
-void flush_thread(void)
-{
-
-	/* Called by fs/exec.c (setup_new_exec) to remove traces of a
-	 * previously running executable. */
-#ifdef CONFIG_SH_FPU
-	if (last_task_used_math == current) {
-		last_task_used_math = NULL;
-	}
-	/* Force FPU state to be reinitialised after exec */
-	clear_used_math();
-#endif
-
-	/* if we are a kernel thread, about to change to user thread,
-         * update kreg
-         */
-	if(current->thread.kregs==&fake_swapper_regs) {
-          current->thread.kregs =
-             ((struct pt_regs *)(THREAD_SIZE + (unsigned long) current) - 1);
-	  current->thread.uregs = current->thread.kregs;
-	}
-}
-
-void release_thread(struct task_struct *dead_task)
-{
-	/* do nothing */
-}
-
-/* Fill in the fpu structure for a core dump.. */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
-{
-#ifdef CONFIG_SH_FPU
-	int fpvalid;
-	struct task_struct *tsk = current;
-
-	fpvalid = !!tsk_used_math(tsk);
-	if (fpvalid) {
-		if (current == last_task_used_math) {
-			enable_fpu();
-			save_fpu(tsk);
-			disable_fpu();
-			last_task_used_math = 0;
-			regs->sr |= SR_FD;
-		}
-
-		memcpy(fpu, &tsk->thread.xstate->hardfpu, sizeof(*fpu));
-	}
-
-	return fpvalid;
-#else
-	return 0; /* Task didn't use the fpu at all. */
-#endif
-}
-EXPORT_SYMBOL(dump_fpu);
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long arg, struct task_struct *p)
-{
-	struct pt_regs *childregs;
-
-#ifdef CONFIG_SH_FPU
-	/* can't happen for a kernel thread */
-	if (last_task_used_math == current) {
-		enable_fpu();
-		save_fpu(current);
-		disable_fpu();
-		last_task_used_math = NULL;
-		current_pt_regs()->sr |= SR_FD;
-	}
-#endif
-	/* Copy from sh version */
-	childregs = (struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1;
-	p->thread.sp = (unsigned long) childregs;
-
-	if (unlikely(p->flags & PF_KTHREAD)) {
-		memset(childregs, 0, sizeof(struct pt_regs));
-		childregs->regs[2] = (unsigned long)arg;
-		childregs->regs[3] = (unsigned long)usp;
-		childregs->sr = (1 << 30); /* not user_mode */
-		childregs->sr |= SR_FD; /* Invalidate FPU flag */
-		p->thread.pc = (unsigned long) ret_from_kernel_thread;
-		return 0;
-	}
-	*childregs = *current_pt_regs();
-
-	/*
-	 * Sign extend the edited stack.
-	 * Note that thread.pc and thread.pc will stay
-	 * 32-bit wide and context switch must take care
-	 * of NEFF sign extension.
-	 */
-	if (usp)
-		childregs->regs[15] = neff_sign_extend(usp);
-	p->thread.uregs = childregs;
-
-	childregs->regs[9] = 0; /* Set return value for child */
-	childregs->sr |= SR_FD; /* Invalidate FPU flag */
-
-	p->thread.pc = (unsigned long) ret_from_fork;
-
-	return 0;
-}
-
-#ifdef CONFIG_FRAME_POINTER
-static int in_sh64_switch_to(unsigned long pc)
-{
-	extern char __sh64_switch_to_end;
-	/* For a sleeping task, the PC is somewhere in the middle of the function,
-	   so we don't have to worry about masking the LSB off */
-	return (pc >= (unsigned long) sh64_switch_to) &&
-	       (pc < (unsigned long) &__sh64_switch_to_end);
-}
-#endif
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long pc;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	/*
-	 * The same comment as on the Alpha applies here, too ...
-	 */
-	pc = thread_saved_pc(p);
-
-#ifdef CONFIG_FRAME_POINTER
-	if (in_sh64_switch_to(pc)) {
-		unsigned long schedule_fp;
-		unsigned long sh64_switch_to_fp;
-		unsigned long schedule_caller_pc;
-
-		sh64_switch_to_fp = (long) p->thread.sp;
-		/* r14 is saved at offset 4 in the sh64_switch_to frame */
-		schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4);
-
-		/* and the caller of 'schedule' is (currently!) saved at offset 24
-		   in the frame of schedule (from disasm) */
-		schedule_caller_pc = *(unsigned long *) (long)(schedule_fp + 24);
-		return schedule_caller_pc;
-	}
-#endif
-	return pc;
-}

arch/sh/kernel/ptrace_64.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/ptrace_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2008  Paul Mundt
- *
- * Started from SH3/4 version:
- *   SuperH version:   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
- *
- *   Original x86 implementation:
- *	By Ross Biro 1/23/92
- *	edited by Linus Torvalds
- */
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/regset.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/mmu_context.h>
-#include <asm/syscalls.h>
-#include <asm/fpu.h>
-#include <asm/traps.h>
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-/* This mask defines the bits of the SR which the user is not allowed to
-   change, which are everything except S, Q, M, PR, SZ, FR. */
-#define SR_MASK      (0xffff8cfd)
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * This routine will get a word from the user area in the process kernel stack.
- */
-static inline int get_stack_long(struct task_struct *task, int offset)
-{
-	unsigned char *stack;
-
-	stack = (unsigned char *)(task->thread.uregs);
-	stack += offset;
-	return (*((int *)stack));
-}
-
-static inline unsigned long
-get_fpu_long(struct task_struct *task, unsigned long addr)
-{
-	unsigned long tmp;
-	struct pt_regs *regs;
-	regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
-
-	if (!tsk_used_math(task)) {
-		if (addr == offsetof(struct user_fpu_struct, fpscr)) {
-			tmp = FPSCR_INIT;
-		} else {
-			tmp = 0xffffffffUL; /* matches initial value in fpu.c */
-		}
-		return tmp;
-	}
-
-	if (last_task_used_math == task) {
-		enable_fpu();
-		save_fpu(task);
-		disable_fpu();
-		last_task_used_math = 0;
-		regs->sr |= SR_FD;
-	}
-
-	tmp = ((long *)task->thread.xstate)[addr / sizeof(unsigned long)];
-	return tmp;
-}
-
-/*
- * This routine will put a word into the user area in the process kernel stack.
- */
-static inline int put_stack_long(struct task_struct *task, int offset,
-				 unsigned long data)
-{
-	unsigned char *stack;
-
-	stack = (unsigned char *)(task->thread.uregs);
-	stack += offset;
-	*(unsigned long *) stack = data;
-	return 0;
-}
-
-static inline int
-put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
-{
-	struct pt_regs *regs;
-
-	regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
-
-	if (!tsk_used_math(task)) {
-		init_fpu(task);
-	} else if (last_task_used_math == task) {
-		enable_fpu();
-		save_fpu(task);
-		disable_fpu();
-		last_task_used_math = 0;
-		regs->sr |= SR_FD;
-	}
-
-	((long *)task->thread.xstate)[addr / sizeof(unsigned long)] = data;
-	return 0;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
-	struct pt_regs *regs = child->thread.uregs;
-
-	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
-
-	set_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
-	struct pt_regs *regs = child->thread.uregs;
-
-	regs->sr &= ~SR_SSTEP;
-
-	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-static int genregs_get(struct task_struct *target,
-		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       void *kbuf, void __user *ubuf)
-{
-	const struct pt_regs *regs = task_pt_regs(target);
-	int ret;
-
-	/* PC, SR, SYSCALL */
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &regs->pc,
-				  0, 3 * sizeof(unsigned long long));
-
-	/* R1 -> R63 */
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  regs->regs,
-					  offsetof(struct pt_regs, regs[0]),
-					  63 * sizeof(unsigned long long));
-	/* TR0 -> TR7 */
-	if (!ret)
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  regs->tregs,
-					  offsetof(struct pt_regs, tregs[0]),
-					  8 * sizeof(unsigned long long));
-
-	if (!ret)
-		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-					       sizeof(struct pt_regs), -1);
-
-	return ret;
-}
-
-static int genregs_set(struct task_struct *target,
-		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       const void *kbuf, const void __user *ubuf)
-{
-	struct pt_regs *regs = task_pt_regs(target);
-	int ret;
-
-	/* PC, SR, SYSCALL */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs->pc,
-				 0, 3 * sizeof(unsigned long long));
-
-	/* R1 -> R63 */
-	if (!ret && count > 0)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 regs->regs,
-					 offsetof(struct pt_regs, regs[0]),
-					 63 * sizeof(unsigned long long));
-
-	/* TR0 -> TR7 */
-	if (!ret && count > 0)
-		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 regs->tregs,
-					 offsetof(struct pt_regs, tregs[0]),
-					 8 * sizeof(unsigned long long));
-
-	if (!ret)
-		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-						sizeof(struct pt_regs), -1);
-
-	return ret;
-}
-
-#ifdef CONFIG_SH_FPU
-int fpregs_get(struct task_struct *target,
-	       const struct user_regset *regset,
-	       unsigned int pos, unsigned int count,
-	       void *kbuf, void __user *ubuf)
-{
-	int ret;
-
-	ret = init_fpu(target);
-	if (ret)
-		return ret;
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.xstate->hardfpu, 0, -1);
-}
-
-static int fpregs_set(struct task_struct *target,
-		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-
-	ret = init_fpu(target);
-	if (ret)
-		return ret;
-
-	set_stopped_child_used_math(target);
-
-	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.xstate->hardfpu, 0, -1);
-}
-
-static int fpregs_active(struct task_struct *target,
-			 const struct user_regset *regset)
-{
-	return tsk_used_math(target) ? regset->n : 0;
-}
-#endif
-
-const struct pt_regs_offset regoffset_table[] = {
-	REG_OFFSET_NAME(pc),
-	REG_OFFSET_NAME(sr),
-	REG_OFFSET_NAME(syscall_nr),
-	REGS_OFFSET_NAME(0),
-	REGS_OFFSET_NAME(1),
-	REGS_OFFSET_NAME(2),
-	REGS_OFFSET_NAME(3),
-	REGS_OFFSET_NAME(4),
-	REGS_OFFSET_NAME(5),
-	REGS_OFFSET_NAME(6),
-	REGS_OFFSET_NAME(7),
-	REGS_OFFSET_NAME(8),
-	REGS_OFFSET_NAME(9),
-	REGS_OFFSET_NAME(10),
-	REGS_OFFSET_NAME(11),
-	REGS_OFFSET_NAME(12),
-	REGS_OFFSET_NAME(13),
-	REGS_OFFSET_NAME(14),
-	REGS_OFFSET_NAME(15),
-	REGS_OFFSET_NAME(16),
-	REGS_OFFSET_NAME(17),
-	REGS_OFFSET_NAME(18),
-	REGS_OFFSET_NAME(19),
-	REGS_OFFSET_NAME(20),
-	REGS_OFFSET_NAME(21),
-	REGS_OFFSET_NAME(22),
-	REGS_OFFSET_NAME(23),
-	REGS_OFFSET_NAME(24),
-	REGS_OFFSET_NAME(25),
-	REGS_OFFSET_NAME(26),
-	REGS_OFFSET_NAME(27),
-	REGS_OFFSET_NAME(28),
-	REGS_OFFSET_NAME(29),
-	REGS_OFFSET_NAME(30),
-	REGS_OFFSET_NAME(31),
-	REGS_OFFSET_NAME(32),
-	REGS_OFFSET_NAME(33),
-	REGS_OFFSET_NAME(34),
-	REGS_OFFSET_NAME(35),
-	REGS_OFFSET_NAME(36),
-	REGS_OFFSET_NAME(37),
-	REGS_OFFSET_NAME(38),
-	REGS_OFFSET_NAME(39),
-	REGS_OFFSET_NAME(40),
-	REGS_OFFSET_NAME(41),
-	REGS_OFFSET_NAME(42),
-	REGS_OFFSET_NAME(43),
-	REGS_OFFSET_NAME(44),
-	REGS_OFFSET_NAME(45),
-	REGS_OFFSET_NAME(46),
-	REGS_OFFSET_NAME(47),
-	REGS_OFFSET_NAME(48),
-	REGS_OFFSET_NAME(49),
-	REGS_OFFSET_NAME(50),
-	REGS_OFFSET_NAME(51),
-	REGS_OFFSET_NAME(52),
-	REGS_OFFSET_NAME(53),
-	REGS_OFFSET_NAME(54),
-	REGS_OFFSET_NAME(55),
-	REGS_OFFSET_NAME(56),
-	REGS_OFFSET_NAME(57),
-	REGS_OFFSET_NAME(58),
-	REGS_OFFSET_NAME(59),
-	REGS_OFFSET_NAME(60),
-	REGS_OFFSET_NAME(61),
-	REGS_OFFSET_NAME(62),
-	REGS_OFFSET_NAME(63),
-	TREGS_OFFSET_NAME(0),
-	TREGS_OFFSET_NAME(1),
-	TREGS_OFFSET_NAME(2),
-	TREGS_OFFSET_NAME(3),
-	TREGS_OFFSET_NAME(4),
-	TREGS_OFFSET_NAME(5),
-	TREGS_OFFSET_NAME(6),
-	TREGS_OFFSET_NAME(7),
-	REG_OFFSET_END,
-};
-
-/*
- * These are our native regset flavours.
- */
-enum sh_regset {
-	REGSET_GENERAL,
-#ifdef CONFIG_SH_FPU
-	REGSET_FPU,
-#endif
-};
-
-static const struct user_regset sh_regsets[] = {
-	/*
-	 * Format is:
-	 *	PC, SR, SYSCALL,
-	 *	R1 --> R63,
-	 *	TR0 --> TR7,
-	 */
-	[REGSET_GENERAL] = {
-		.core_note_type	= NT_PRSTATUS,
-		.n		= ELF_NGREG,
-		.size		= sizeof(long long),
-		.align		= sizeof(long long),
-		.get		= genregs_get,
-		.set		= genregs_set,
-	},
-
-#ifdef CONFIG_SH_FPU
-	[REGSET_FPU] = {
-		.core_note_type	= NT_PRFPREG,
-		.n		= sizeof(struct user_fpu_struct) /
-				  sizeof(long long),
-		.size		= sizeof(long long),
-		.align		= sizeof(long long),
-		.get		= fpregs_get,
-		.set		= fpregs_set,
-		.active		= fpregs_active,
-	},
-#endif
-};
-
-static const struct user_regset_view user_sh64_native_view = {
-	.name		= "sh64",
-	.e_machine	= EM_SH,
-	.regsets	= sh_regsets,
-	.n		= ARRAY_SIZE(sh_regsets),
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
-	return &user_sh64_native_view;
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long tmp;
-
-		ret = -EIO;
-		if ((addr & 3) || addr < 0)
-			break;
-
-		if (addr < sizeof(struct pt_regs))
-			tmp = get_stack_long(child, addr);
-		else if ((addr >= offsetof(struct user, fpu)) &&
-			 (addr <  offsetof(struct user, u_fpvalid))) {
-			unsigned long index;
-			ret = init_fpu(child);
-			if (ret)
-				break;
-			index = addr - offsetof(struct user, fpu);
-			tmp = get_fpu_long(child, index);
-		} else if (addr == offsetof(struct user, u_fpvalid)) {
-			tmp = !!tsk_used_math(child);
-		} else {
-			break;
-		}
-		ret = put_user(tmp, datap);
-		break;
-	}
-
-	case PTRACE_POKEUSR:
-                /* write the word at location addr in the USER area. We must
-                   disallow any changes to certain SR bits or u_fpvalid, since
-                   this could crash the kernel or result in a security
-                   loophole. */
-		ret = -EIO;
-		if ((addr & 3) || addr < 0)
-			break;
-
-		if (addr < sizeof(struct pt_regs)) {
-			/* Ignore change of top 32 bits of SR */
-			if (addr == offsetof (struct pt_regs, sr)+4)
-			{
-				ret = 0;
-				break;
-			}
-			/* If lower 32 bits of SR, ignore non-user bits */
-			if (addr == offsetof (struct pt_regs, sr))
-			{
-				long cursr = get_stack_long(child, addr);
-				data &= ~(SR_MASK);
-				data |= (cursr & SR_MASK);
-			}
-			ret = put_stack_long(child, addr, data);
-		}
-		else if ((addr >= offsetof(struct user, fpu)) &&
-			 (addr <  offsetof(struct user, u_fpvalid))) {
-			unsigned long index;
-			ret = init_fpu(child);
-			if (ret)
-				break;
-			index = addr - offsetof(struct user, fpu);
-			ret = put_fpu_long(child, index, data);
-		}
-		break;
-
-	case PTRACE_GETREGS:
-		return copy_regset_to_user(child, &user_sh64_native_view,
-					   REGSET_GENERAL,
-					   0, sizeof(struct pt_regs),
-					   datap);
-	case PTRACE_SETREGS:
-		return copy_regset_from_user(child, &user_sh64_native_view,
-					     REGSET_GENERAL,
-					     0, sizeof(struct pt_regs),
-					     datap);
-#ifdef CONFIG_SH_FPU
-	case PTRACE_GETFPREGS:
-		return copy_regset_to_user(child, &user_sh64_native_view,
-					   REGSET_FPU,
-					   0, sizeof(struct user_fpu_struct),
-					   datap);
-	case PTRACE_SETFPREGS:
-		return copy_regset_from_user(child, &user_sh64_native_view,
-					     REGSET_FPU,
-					     0, sizeof(struct user_fpu_struct),
-					     datap);
-#endif
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-}
-
-asmlinkage int sh64_ptrace(long request, long pid,
-			   unsigned long addr, unsigned long data)
-{
-#define WPC_DBRMODE 0x0d104008
-	static unsigned long first_call;
-
-	if (!test_and_set_bit(0, &first_call)) {
-		/* Set WPC.DBRMODE to 0.  This makes all debug events get
-		 * delivered through RESVEC, i.e. into the handlers in entry.S.
-		 * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE
-		 * would normally be left set to 1, which makes debug events get
-		 * delivered through DBRVEC, i.e. into the remote gdb's
-		 * handlers.  This prevents ptrace getting them, and confuses
-		 * the remote gdb.) */
-		printk("DBRMODE set to 0 to permit native debugging\n");
-		poke_real_address_q(WPC_DBRMODE, 0);
-	}
-
-	return sys_ptrace(request, pid, addr, data);
-}
-
-asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
-{
-	long long ret = 0;
-
-	secure_computing_strict(regs->regs[9]);
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs))
-		/*
-		 * Tracing decided this syscall should not happen.
-		 * We'll return a bogus call number to get an ENOSYS
-		 * error, but leave the original number in regs->regs[0].
-		 */
-		ret = -1LL;
-
-	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_enter(regs, regs->regs[9]);
-
-	audit_syscall_entry(regs->regs[1], regs->regs[2], regs->regs[3],
-			    regs->regs[4], regs->regs[5]);
-
-	return ret ?: regs->regs[9];
-}
-
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
-{
-	int step;
-
-	audit_syscall_exit(regs);
-
-	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_exit(regs, regs->regs[9]);
-
-	step = test_thread_flag(TIF_SINGLESTEP);
-	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(regs, step);
-}
-
-/* Called with interrupts disabled */
-asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs)
-{
-	/* This is called after a single step exception (DEBUGSS).
-	   There is no need to change the PC, as it is a post-execution
-	   exception, as entry.S does not do anything to the PC for DEBUGSS.
-	   We need to clear the Single Step setting in SR to avoid
-	   continually stepping. */
-	local_irq_enable();
-	regs->sr &= ~SR_SSTEP;
-	force_sig(SIGTRAP);
-}
-
-/* Called with interrupts disabled */
-BUILD_TRAP_HANDLER(breakpoint)
-{
-	TRAP_HANDLER_DECL;
-
-	/* We need to forward step the PC, to counteract the backstep done
-	   in signal.c. */
-	local_irq_enable();
-	force_sig(SIGTRAP);
-	regs->pc += 4;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
-	user_disable_single_step(child);
-}

arch/sh/kernel/reboot.c

@@ -4,9 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 #include <linux/module.h>
-#ifdef CONFIG_SUPERH32
 #include <asm/watchdog.h>
-#endif
 #include <asm/addrspace.h>
 #include <asm/reboot.h>
 #include <asm/tlbflush.h>
@@ -15,13 +13,11 @@
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-#ifdef CONFIG_SUPERH32
 static void watchdog_trigger_immediate(void)
 {
 	sh_wdt_write_cnt(0xFF);
 	sh_wdt_write_csr(0xC2);
 }
-#endif
 
 static void native_machine_restart(char * __unused)
 {
@@ -33,10 +29,8 @@ static void native_machine_restart(char * __unused)
 	/* Address error with SR.BL=1 first. */
 	trigger_address_error();
 
-#ifdef CONFIG_SUPERH32
 	/* If that fails or is unsupported, go for the watchdog next. */
 	watchdog_trigger_immediate();
-#endif
 
 	/*
 	 * Give up and sleep.

arch/sh/kernel/sh_ksyms_32.c

@@ -38,6 +38,13 @@ DECLARE_EXPORT(__ashlsi3);
 DECLARE_EXPORT(__lshrsi3_r0);
 DECLARE_EXPORT(__ashrsi3_r0);
 DECLARE_EXPORT(__ashlsi3_r0);
+
+DECLARE_EXPORT(__ashiftrt_r4_0);
+DECLARE_EXPORT(__ashiftrt_r4_1);
+DECLARE_EXPORT(__ashiftrt_r4_2);
+DECLARE_EXPORT(__ashiftrt_r4_3);
+DECLARE_EXPORT(__ashiftrt_r4_4);
+DECLARE_EXPORT(__ashiftrt_r4_5);
 DECLARE_EXPORT(__ashiftrt_r4_6);
 DECLARE_EXPORT(__ashiftrt_r4_7);
 DECLARE_EXPORT(__ashiftrt_r4_8);
@@ -48,13 +55,23 @@ DECLARE_EXPORT(__ashiftrt_r4_12);
 DECLARE_EXPORT(__ashiftrt_r4_13);
 DECLARE_EXPORT(__ashiftrt_r4_14);
 DECLARE_EXPORT(__ashiftrt_r4_15);
+DECLARE_EXPORT(__ashiftrt_r4_16);
+DECLARE_EXPORT(__ashiftrt_r4_17);
+DECLARE_EXPORT(__ashiftrt_r4_18);
+DECLARE_EXPORT(__ashiftrt_r4_19);
 DECLARE_EXPORT(__ashiftrt_r4_20);
 DECLARE_EXPORT(__ashiftrt_r4_21);
 DECLARE_EXPORT(__ashiftrt_r4_22);
 DECLARE_EXPORT(__ashiftrt_r4_23);
 DECLARE_EXPORT(__ashiftrt_r4_24);
+DECLARE_EXPORT(__ashiftrt_r4_25);
+DECLARE_EXPORT(__ashiftrt_r4_26);
 DECLARE_EXPORT(__ashiftrt_r4_27);
+DECLARE_EXPORT(__ashiftrt_r4_28);
+DECLARE_EXPORT(__ashiftrt_r4_29);
 DECLARE_EXPORT(__ashiftrt_r4_30);
+DECLARE_EXPORT(__ashiftrt_r4_31);
+DECLARE_EXPORT(__ashiftrt_r4_32);
 DECLARE_EXPORT(__movstr);
 DECLARE_EXPORT(__movstrSI8);
 DECLARE_EXPORT(__movstrSI12);

arch/sh/kernel/sh_ksyms_64.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/sh_ksyms_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- */
-#include <linux/rwsem.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/sched.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/screen_info.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/irq.h>
-
-EXPORT_SYMBOL(__put_user_asm_b);
-EXPORT_SYMBOL(__put_user_asm_w);
-EXPORT_SYMBOL(__put_user_asm_l);
-EXPORT_SYMBOL(__put_user_asm_q);
-EXPORT_SYMBOL(__get_user_asm_b);
-EXPORT_SYMBOL(__get_user_asm_w);
-EXPORT_SYMBOL(__get_user_asm_l);
-EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcpy);
-
-/* Ugh.  These come in from libgcc.a at link time. */
-#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
-
-DECLARE_EXPORT(__sdivsi3);
-DECLARE_EXPORT(__sdivsi3_1);
-DECLARE_EXPORT(__sdivsi3_2);
-DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__div_table);

arch/sh/kernel/signal_64.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/signal_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2008  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- */
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/tracehook.h>
-#include <asm/ucontext.h>
-#include <linux/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
-#include <asm/fpu.h>
-
-#define REG_RET 9
-#define REG_ARG1 2
-#define REG_ARG2 3
-#define REG_ARG3 4
-#define REG_SP 15
-#define REG_PR 18
-#define REF_REG_RET regs->regs[REG_RET]
-#define REF_REG_SP regs->regs[REG_SP]
-#define DEREF_REG_PR regs->regs[REG_PR]
-
-#define DEBUG_SIG 0
-
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs);
-
-static inline void
-handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa)
-{
-	/* If we're not from a syscall, bail out */
-	if (regs->syscall_nr < 0)
-		return;
-
-	/* check for system call restart.. */
-	switch (regs->regs[REG_RET]) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-		no_system_call_restart:
-			regs->regs[REG_RET] = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(sa->sa_flags & SA_RESTART))
-				goto no_system_call_restart;
-		/* fallthrough */
-		case -ERESTARTNOINTR:
-			/* Decode syscall # */
-			regs->regs[REG_RET] = regs->syscall_nr;
-			regs->pc -= 4;
-			break;
-	}
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs)
-{
-	struct ksignal ksig;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (get_signal(&ksig)) {
-		handle_syscall_restart(regs, &ksig.ka.sa);
-
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(&ksig, regs);
-		return;
-	}
-
-	/* Did we come from a system call? */
-	if (regs->syscall_nr >= 0) {
-		/* Restart the system call - no handlers present */
-		switch (regs->regs[REG_RET]) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			/* Decode Syscall # */
-			regs->regs[REG_RET] = regs->syscall_nr;
-			regs->pc -= 4;
-			break;
-
-		case -ERESTART_RESTARTBLOCK:
-			regs->regs[REG_RET] = __NR_restart_syscall;
-			regs->pc -= 4;
-			break;
-		}
-	}
-
-	/* No signal to deliver -- put the saved sigmask back */
-	restore_saved_sigmask();
-}
-
-/*
- * Do a signal return; undo the signal stack.
- */
-struct sigframe {
-	struct sigcontext sc;
-	unsigned long extramask[_NSIG_WORDS-1];
-	long long retcode[2];
-};
-
-struct rt_sigframe {
-	struct siginfo __user *pinfo;
-	void *puc;
-	struct siginfo info;
-	struct ucontext uc;
-	long long retcode[2];
-};
-
-#ifdef CONFIG_SH_FPU
-static inline int
-restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
-	int err = 0;
-	int fpvalid;
-
-	err |= __get_user (fpvalid, &sc->sc_fpvalid);
-	conditional_used_math(fpvalid);
-	if (! fpvalid)
-		return err;
-
-	if (current == last_task_used_math) {
-		last_task_used_math = NULL;
-		regs->sr |= SR_FD;
-	}
-
-	err |= __copy_from_user(&current->thread.xstate->hardfpu, &sc->sc_fpregs[0],
-				(sizeof(long long) * 32) + (sizeof(int) * 1));
-
-	return err;
-}
-
-static inline int
-setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
-	int err = 0;
-	int fpvalid;
-
-	fpvalid = !!used_math();
-	err |= __put_user(fpvalid, &sc->sc_fpvalid);
-	if (! fpvalid)
-		return err;
-
-	if (current == last_task_used_math) {
-		enable_fpu();
-		save_fpu(current);
-		disable_fpu();
-		last_task_used_math = NULL;
-		regs->sr |= SR_FD;
-	}
-
-	err |= __copy_to_user(&sc->sc_fpregs[0], &current->thread.xstate->hardfpu,
-			      (sizeof(long long) * 32) + (sizeof(int) * 1));
-	clear_used_math();
-
-	return err;
-}
-#else
-static inline int
-restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
-	return 0;
-}
-static inline int
-setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
-{
-	return 0;
-}
-#endif
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p)
-{
-	unsigned int err = 0;
-        unsigned long long current_sr, new_sr;
-#define SR_MASK 0xffff8cfd
-
-#define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
-
-	COPY(regs[0]);	COPY(regs[1]);	COPY(regs[2]);	COPY(regs[3]);
-	COPY(regs[4]);	COPY(regs[5]);	COPY(regs[6]);	COPY(regs[7]);
-	COPY(regs[8]);	COPY(regs[9]);  COPY(regs[10]);	COPY(regs[11]);
-	COPY(regs[12]);	COPY(regs[13]);	COPY(regs[14]);	COPY(regs[15]);
-	COPY(regs[16]);	COPY(regs[17]);	COPY(regs[18]);	COPY(regs[19]);
-	COPY(regs[20]);	COPY(regs[21]);	COPY(regs[22]);	COPY(regs[23]);
-	COPY(regs[24]);	COPY(regs[25]);	COPY(regs[26]);	COPY(regs[27]);
-	COPY(regs[28]);	COPY(regs[29]);	COPY(regs[30]);	COPY(regs[31]);
-	COPY(regs[32]);	COPY(regs[33]);	COPY(regs[34]);	COPY(regs[35]);
-	COPY(regs[36]);	COPY(regs[37]);	COPY(regs[38]);	COPY(regs[39]);
-	COPY(regs[40]);	COPY(regs[41]);	COPY(regs[42]);	COPY(regs[43]);
-	COPY(regs[44]);	COPY(regs[45]);	COPY(regs[46]);	COPY(regs[47]);
-	COPY(regs[48]);	COPY(regs[49]);	COPY(regs[50]);	COPY(regs[51]);
-	COPY(regs[52]);	COPY(regs[53]);	COPY(regs[54]);	COPY(regs[55]);
-	COPY(regs[56]);	COPY(regs[57]);	COPY(regs[58]);	COPY(regs[59]);
-	COPY(regs[60]);	COPY(regs[61]);	COPY(regs[62]);
-	COPY(tregs[0]);	COPY(tregs[1]);	COPY(tregs[2]);	COPY(tregs[3]);
-	COPY(tregs[4]);	COPY(tregs[5]);	COPY(tregs[6]);	COPY(tregs[7]);
-
-        /* Prevent the signal handler manipulating SR in a way that can
-           crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be
-           modified */
-        current_sr = regs->sr;
-        err |= __get_user(new_sr, &sc->sc_sr);
-        regs->sr &= SR_MASK;
-        regs->sr |= (new_sr & ~SR_MASK);
-
-	COPY(pc);
-
-#undef COPY
-
-	/* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr
-	 * has been restored above.) */
-	err |= restore_sigcontext_fpu(regs, sc);
-
-	regs->syscall_nr = -1;		/* disable syscall checks */
-	err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]);
-	return err;
-}
-
-asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3,
-				   unsigned long r4, unsigned long r5,
-				   unsigned long r6, unsigned long r7,
-				   struct pt_regs * regs)
-{
-	struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP;
-	sigset_t set;
-	long long ret;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-				    sizeof(frame->extramask))))
-		goto badframe;
-
-	set_current_blocked(&set);
-
-	if (restore_sigcontext(regs, &frame->sc, &ret))
-		goto badframe;
-	regs->pc -= 4;
-
-	return (int) ret;
-
-badframe:
-	force_sig(SIGSEGV);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
-				unsigned long r4, unsigned long r5,
-				unsigned long r6, unsigned long r7,
-				struct pt_regs * regs)
-{
-	struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
-	sigset_t set;
-	long long ret;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	set_current_blocked(&set);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret))
-		goto badframe;
-	regs->pc -= 4;
-
-	if (restore_altstack(&frame->uc.uc_stack))
-		goto badframe;
-
-	return (int) ret;
-
-badframe:
-	force_sig(SIGSEGV);
-	return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
-		 unsigned long mask)
-{
-	int err = 0;
-
-	/* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */
-	err |= setup_sigcontext_fpu(regs, sc);
-
-#define COPY(x)		err |= __put_user(regs->x, &sc->sc_##x)
-
-	COPY(regs[0]);	COPY(regs[1]);	COPY(regs[2]);	COPY(regs[3]);
-	COPY(regs[4]);	COPY(regs[5]);	COPY(regs[6]);	COPY(regs[7]);
-	COPY(regs[8]);	COPY(regs[9]);	COPY(regs[10]);	COPY(regs[11]);
-	COPY(regs[12]);	COPY(regs[13]);	COPY(regs[14]);	COPY(regs[15]);
-	COPY(regs[16]);	COPY(regs[17]);	COPY(regs[18]);	COPY(regs[19]);
-	COPY(regs[20]);	COPY(regs[21]);	COPY(regs[22]);	COPY(regs[23]);
-	COPY(regs[24]);	COPY(regs[25]);	COPY(regs[26]);	COPY(regs[27]);
-	COPY(regs[28]);	COPY(regs[29]);	COPY(regs[30]);	COPY(regs[31]);
-	COPY(regs[32]);	COPY(regs[33]);	COPY(regs[34]);	COPY(regs[35]);
-	COPY(regs[36]);	COPY(regs[37]);	COPY(regs[38]);	COPY(regs[39]);
-	COPY(regs[40]);	COPY(regs[41]);	COPY(regs[42]);	COPY(regs[43]);
-	COPY(regs[44]);	COPY(regs[45]);	COPY(regs[46]);	COPY(regs[47]);
-	COPY(regs[48]);	COPY(regs[49]);	COPY(regs[50]);	COPY(regs[51]);
-	COPY(regs[52]);	COPY(regs[53]);	COPY(regs[54]);	COPY(regs[55]);
-	COPY(regs[56]);	COPY(regs[57]);	COPY(regs[58]);	COPY(regs[59]);
-	COPY(regs[60]);	COPY(regs[61]);	COPY(regs[62]);
-	COPY(tregs[0]);	COPY(tregs[1]);	COPY(tregs[2]);	COPY(tregs[3]);
-	COPY(tregs[4]);	COPY(tregs[5]);	COPY(tregs[6]);	COPY(tregs[7]);
-	COPY(sr);	COPY(pc);
-
-#undef COPY
-
-	err |= __put_user(mask, &sc->oldmask);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
-{
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	return (void __user *)((sp - frame_size) & -8ul);
-}
-
-void sa_default_restorer(void);		/* See comments below */
-void sa_default_rt_restorer(void);	/* See comments below */
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe __user *frame;
-	int err = 0, sig = ksig->sig;
-	int signal;
-
-	frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame));
-
-	if (!access_ok(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	/* Give up earlier as i386, in case */
-	if (err)
-		return -EFAULT;
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask)); }
-
-	/* Give up earlier as i386, in case */
-	if (err)
-		return -EFAULT;
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
-		/*
-		 * On SH5 all edited pointers are subject to NEFF
-		 */
-		DEREF_REG_PR = neff_sign_extend((unsigned long)
-			ksig->ka->sa.sa_restorer | 0x1);
-	} else {
-		/*
-		 * Different approach on SH5.
-	         * . Endianness independent asm code gets placed in entry.S .
-		 *   This is limited to four ASM instructions corresponding
-		 *   to two long longs in size.
-		 * . err checking is done on the else branch only
-		 * . flush_icache_range() is called upon __put_user() only
-		 * . all edited pointers are subject to NEFF
-		 * . being code, linker turns ShMedia bit on, always
-		 *   dereference index -1.
-		 */
-		DEREF_REG_PR = neff_sign_extend((unsigned long)
-			frame->retcode | 0x01);
-
-		if (__copy_to_user(frame->retcode,
-			(void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0)
-			return -EFAULT;
-
-		/* Cohere the trampoline with the I-cache. */
-		flush_cache_sigtramp(DEREF_REG_PR-1);
-	}
-
-	/*
-	 * Set up registers for signal handler.
-	 * All edited pointers are subject to NEFF.
-	 */
-	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
-	regs->regs[REG_ARG1] = sig; /* Arg for signal handler */
-
-        /* FIXME:
-           The glibc profiling support for SH-5 needs to be passed a sigcontext
-           so it can retrieve the PC.  At some point during 2003 the glibc
-           support was changed to receive the sigcontext through the 2nd
-           argument, but there are still versions of libc.so in use that use
-           the 3rd argument.  Until libc.so is stabilised, pass the sigcontext
-           through both 2nd and 3rd arguments.
-        */
-
-	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
-	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
-
-	regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler);
-
-	/* Broken %016Lx */
-	pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
-		 sig, current->comm, current->pid, frame,
-		 regs->pc >> 32, regs->pc & 0xffffffff,
-		 DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
-
-	return 0;
-}
-
-static int setup_rt_frame(struct ksignal *kig, sigset_t *set,
-			  struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	int err = 0, sig = ksig->sig;
-
-	frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame));
-
-	if (!access_ok(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
-	/* Give up earlier as i386, in case */
-	if (err)
-		return -EFAULT;
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __save_altstack(&frame->uc.uc_stack, regs->regs[REG_SP]);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext,
-			        regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Give up earlier as i386, in case */
-	if (err)
-		return -EFAULT;
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
-		/*
-		 * On SH5 all edited pointers are subject to NEFF
-		 */
-		DEREF_REG_PR = neff_sign_extend((unsigned long)
-			ksig->ka.sa.sa_restorer | 0x1);
-	} else {
-		/*
-		 * Different approach on SH5.
-	         * . Endianness independent asm code gets placed in entry.S .
-		 *   This is limited to four ASM instructions corresponding
-		 *   to two long longs in size.
-		 * . err checking is done on the else branch only
-		 * . flush_icache_range() is called upon __put_user() only
-		 * . all edited pointers are subject to NEFF
-		 * . being code, linker turns ShMedia bit on, always
-		 *   dereference index -1.
-		 */
-		DEREF_REG_PR = neff_sign_extend((unsigned long)
-			frame->retcode | 0x01);
-
-		if (__copy_to_user(frame->retcode,
-			(void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0)
-			return -EFAULT;
-
-		/* Cohere the trampoline with the I-cache. */
-		flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
-	}
-
-	/*
-	 * Set up registers for signal handler.
-	 * All edited pointers are subject to NEFF.
-	 */
-	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
-	regs->regs[REG_ARG1] = sig; /* Arg for signal handler */
-	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
-	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
-	regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler);
-
-	pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n",
-		 sig, current->comm, current->pid, frame,
-		 regs->pc >> 32, regs->pc & 0xffffffff,
-		 DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff);
-
-	return 0;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(struct ksignal *ksig, struct pt_regs *regs)
-{
-	sigset_t *oldset = sigmask_to_save();
-	int ret;
-
-	/* Set up the stack frame */
-	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(ksig, oldset, regs);
-	else
-		ret = setup_frame(ksig, oldset, regs);
-
-	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
-{
-	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs);
-
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-}

arch/sh/kernel/syscalls_64.S

-/* SPDX-License-Identifier: GPL-2.0
- *
- * arch/sh/kernel/syscalls_64.S
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2007  Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- */
-
-#include <linux/sys.h>
-
-	.section .data, "aw"
-	.balign 32
-
-/*
- * System calls jump table
- */
-	.globl  sys_call_table
-sys_call_table:
-	.long sys_restart_syscall	/* 0  -  old "setup()" system call  */
-	.long sys_exit
-	.long sys_fork
-	.long sys_read
-	.long sys_write
-	.long sys_open			/* 5 */
-	.long sys_close
-	.long sys_waitpid
-	.long sys_creat
-	.long sys_link
-	.long sys_unlink		/* 10 */
-	.long sys_execve
-	.long sys_chdir
-	.long sys_time
-	.long sys_mknod
-	.long sys_chmod			/* 15 */
-	.long sys_lchown16
-	.long sys_ni_syscall	/* old break syscall holder */
-	.long sys_stat
-	.long sys_lseek
-	.long sys_getpid		/* 20 */
-	.long sys_mount
-	.long sys_oldumount
-	.long sys_setuid16
-	.long sys_getuid16
-	.long sys_stime			/* 25 */
-	.long sh64_ptrace
-	.long sys_alarm
-	.long sys_fstat
-	.long sys_pause
-	.long sys_utime			/* 30 */
-	.long sys_ni_syscall	/* old stty syscall holder */
-	.long sys_ni_syscall	/* old gtty syscall holder */
-	.long sys_access
-	.long sys_nice
-	.long sys_ni_syscall		/* 35 */ /* old ftime syscall holder */
-	.long sys_sync
-	.long sys_kill
-	.long sys_rename
-	.long sys_mkdir
-	.long sys_rmdir			/* 40 */
-	.long sys_dup
-	.long sys_pipe
-	.long sys_times
-	.long sys_ni_syscall	/* old prof syscall holder */
-	.long sys_brk			/* 45 */
-	.long sys_setgid16
-	.long sys_getgid16
-	.long sys_signal
-	.long sys_geteuid16
-	.long sys_getegid16		/* 50 */
-	.long sys_acct
-	.long sys_umount		/* recycled never used phys( */
-	.long sys_ni_syscall	/* old lock syscall holder */
-	.long sys_ioctl
-	.long sys_fcntl			/* 55 */
-	.long sys_ni_syscall	/* old mpx syscall holder */
-	.long sys_setpgid
-	.long sys_ni_syscall	/* old ulimit syscall holder */
-	.long sys_ni_syscall	/* sys_olduname */
-	.long sys_umask			/* 60 */
-	.long sys_chroot
-	.long sys_ustat
-	.long sys_dup2
-	.long sys_getppid
-	.long sys_getpgrp		/* 65 */
-	.long sys_setsid
-	.long sys_sigaction
-	.long sys_sgetmask
-	.long sys_ssetmask
-	.long sys_setreuid16		/* 70 */
-	.long sys_setregid16
-	.long sys_sigsuspend
-	.long sys_sigpending
-	.long sys_sethostname
-	.long sys_setrlimit		/* 75 */
-	.long sys_old_getrlimit
-	.long sys_getrusage
-	.long sys_gettimeofday
-	.long sys_settimeofday
-	.long sys_getgroups16		/* 80 */
-	.long sys_setgroups16
-	.long sys_ni_syscall	/* sys_oldselect */
-	.long sys_symlink
-	.long sys_lstat
-	.long sys_readlink		/* 85 */
-	.long sys_uselib
-	.long sys_swapon
-	.long sys_reboot
-	.long sys_old_readdir
-	.long old_mmap			/* 90 */
-	.long sys_munmap
-	.long sys_truncate
-	.long sys_ftruncate
-	.long sys_fchmod
-	.long sys_fchown16		/* 95 */
-	.long sys_getpriority
-	.long sys_setpriority
-	.long sys_ni_syscall	/* old profil syscall holder */
-	.long sys_statfs
-	.long sys_fstatfs		/* 100 */
-	.long sys_ni_syscall	/* ioperm */
-	.long sys_socketcall	/* Obsolete implementation of socket syscall */
-	.long sys_syslog
-	.long sys_setitimer
-	.long sys_getitimer		/* 105 */
-	.long sys_newstat
-	.long sys_newlstat
-	.long sys_newfstat
-	.long sys_uname
-	.long sys_ni_syscall		/* 110 */ /* iopl */
-	.long sys_vhangup
-	.long sys_ni_syscall	/* idle */
-	.long sys_ni_syscall	/* vm86old */
-	.long sys_wait4
-	.long sys_swapoff		/* 115 */
-	.long sys_sysinfo
-	.long sys_ipc		/* Obsolete ipc syscall implementation */
-	.long sys_fsync
-	.long sys_sigreturn
-	.long sys_clone			/* 120 */
-	.long sys_setdomainname
-	.long sys_newuname
-	.long sys_cacheflush	/* x86: sys_modify_ldt */
-	.long sys_adjtimex
-	.long sys_mprotect		/* 125 */
-	.long sys_sigprocmask
-	.long sys_ni_syscall		/* old "create_module" */
-	.long sys_init_module
-	.long sys_delete_module
-	.long sys_ni_syscall		/* 130: old "get_kernel_syms" */
-	.long sys_quotactl
-	.long sys_getpgid
-	.long sys_fchdir
-	.long sys_bdflush
-	.long sys_sysfs			/* 135 */
-	.long sys_personality
-	.long sys_ni_syscall	/* for afs_syscall */
-	.long sys_setfsuid16
-	.long sys_setfsgid16
-	.long sys_llseek		/* 140 */
-	.long sys_getdents
-	.long sys_select
-	.long sys_flock
-	.long sys_msync
-	.long sys_readv			/* 145 */
-	.long sys_writev
-	.long sys_getsid
-	.long sys_fdatasync
-	.long sys_sysctl
-	.long sys_mlock			/* 150 */
-	.long sys_munlock
-	.long sys_mlockall
-	.long sys_munlockall
-	.long sys_sched_setparam
-	.long sys_sched_getparam	/* 155 */
-	.long sys_sched_setscheduler
-	.long sys_sched_getscheduler
-	.long sys_sched_yield
-	.long sys_sched_get_priority_max
-	.long sys_sched_get_priority_min  /* 160 */
-	.long sys_sched_rr_get_interval
-	.long sys_nanosleep
-	.long sys_mremap
-	.long sys_setresuid16
-	.long sys_getresuid16		/* 165 */
-	.long sys_ni_syscall	/* vm86 */
-	.long sys_ni_syscall	/* old "query_module" */
-	.long sys_poll
-	.long sys_ni_syscall	/* was nfsservctl */
-	.long sys_setresgid16		/* 170 */
-	.long sys_getresgid16
-	.long sys_prctl
-	.long sys_rt_sigreturn
-	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask	/* 175 */
-	.long sys_rt_sigpending
-	.long sys_rt_sigtimedwait
-	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend
-	.long sys_pread64		/* 180 */
-	.long sys_pwrite64
-	.long sys_chown16
-	.long sys_getcwd
-	.long sys_capget
-	.long sys_capset		/* 185 */
-	.long sys_sigaltstack
-	.long sys_sendfile
-	.long sys_ni_syscall	/* getpmsg */
-	.long sys_ni_syscall	/* putpmsg */
-	.long sys_vfork			/* 190 */
-	.long sys_getrlimit
-	.long sys_mmap2
-	.long sys_truncate64
-	.long sys_ftruncate64
-	.long sys_stat64		/* 195 */
-	.long sys_lstat64
-	.long sys_fstat64
-	.long sys_lchown
-	.long sys_getuid
-	.long sys_getgid		/* 200 */
-	.long sys_geteuid
-	.long sys_getegid
-	.long sys_setreuid
-	.long sys_setregid
-	.long sys_getgroups		/* 205 */
-	.long sys_setgroups
-	.long sys_fchown
-	.long sys_setresuid
-	.long sys_getresuid
-	.long sys_setresgid		/* 210 */
-	.long sys_getresgid
-	.long sys_chown
-	.long sys_setuid
-	.long sys_setgid
-	.long sys_setfsuid		/* 215 */
-	.long sys_setfsgid
-	.long sys_pivot_root
-	.long sys_mincore
-	.long sys_madvise
-	/* Broken-out socket family (maintain backwards compatibility in syscall
-	   numbering with 2.4) */
-	.long sys_socket		/* 220 */
-	.long sys_bind
-	.long sys_connect
-	.long sys_listen
-	.long sys_accept
-	.long sys_getsockname		/* 225 */
-	.long sys_getpeername
-	.long sys_socketpair
-	.long sys_send
-	.long sys_sendto
-	.long sys_recv			/* 230*/
-	.long sys_recvfrom
-	.long sys_shutdown
-	.long sys_setsockopt
-	.long sys_getsockopt
-	.long sys_sendmsg		/* 235 */
-	.long sys_recvmsg
-	/* Broken-out IPC family (maintain backwards compatibility in syscall
-	   numbering with 2.4) */
-	.long sys_semop
-	.long sys_semget
-	.long sys_semctl
-	.long sys_msgsnd		/* 240 */
-	.long sys_msgrcv
-	.long sys_msgget
-	.long sys_msgctl
-	.long sys_shmat
-	.long sys_shmdt			/* 245 */
-	.long sys_shmget
-	.long sys_shmctl
-	/* Rest of syscalls listed in 2.4 i386 unistd.h */
-	.long sys_getdents64
-	.long sys_fcntl64
-	.long sys_ni_syscall		/* 250 reserved for TUX */
-	.long sys_ni_syscall		/* Reserved for Security */
-	.long sys_gettid
-	.long sys_readahead
-	.long sys_setxattr
-	.long sys_lsetxattr		/* 255 */
-	.long sys_fsetxattr
-	.long sys_getxattr
-	.long sys_lgetxattr
-	.long sys_fgetxattr
-	.long sys_listxattr		/* 260 */
-	.long sys_llistxattr
-	.long sys_flistxattr
-	.long sys_removexattr
-	.long sys_lremovexattr
-	.long sys_fremovexattr  	/* 265 */
-	.long sys_tkill
-	.long sys_sendfile64
-	.long sys_futex
-	.long sys_sched_setaffinity
-	.long sys_sched_getaffinity	/* 270 */
-	.long sys_ni_syscall		/* reserved for set_thread_area */
-	.long sys_ni_syscall		/* reserved for get_thread_area */
-	.long sys_io_setup
-	.long sys_io_destroy
-	.long sys_io_getevents		/* 275 */
-	.long sys_io_submit
-	.long sys_io_cancel
-	.long sys_fadvise64
-	.long sys_ni_syscall
-	.long sys_exit_group		/* 280 */
-	/* Rest of new 2.6 syscalls */
-	.long sys_lookup_dcookie
-	.long sys_epoll_create
-	.long sys_epoll_ctl
-	.long sys_epoll_wait
- 	.long sys_remap_file_pages	/* 285 */
- 	.long sys_set_tid_address
- 	.long sys_timer_create
- 	.long sys_timer_settime
- 	.long sys_timer_gettime
- 	.long sys_timer_getoverrun	/* 290 */
- 	.long sys_timer_delete
- 	.long sys_clock_settime
- 	.long sys_clock_gettime
- 	.long sys_clock_getres
- 	.long sys_clock_nanosleep	/* 295 */
-	.long sys_statfs64
-	.long sys_fstatfs64
-	.long sys_tgkill
-	.long sys_utimes
- 	.long sys_fadvise64_64		/* 300 */
-	.long sys_ni_syscall	/* Reserved for vserver */
-	.long sys_ni_syscall	/* Reserved for mbind */
-	.long sys_ni_syscall	/* get_mempolicy */
-	.long sys_ni_syscall	/* set_mempolicy */
-	.long sys_mq_open		/* 305 */
-	.long sys_mq_unlink
-	.long sys_mq_timedsend
-	.long sys_mq_timedreceive
-	.long sys_mq_notify
-	.long sys_mq_getsetattr		/* 310 */
-	.long sys_ni_syscall	/* Reserved for kexec */
-	.long sys_waitid
-	.long sys_add_key
-	.long sys_request_key
-	.long sys_keyctl		/* 315 */
-	.long sys_ioprio_set
-	.long sys_ioprio_get
-	.long sys_inotify_init
-	.long sys_inotify_add_watch
-	.long sys_inotify_rm_watch	/* 320 */
-	.long sys_ni_syscall
-	.long sys_migrate_pages
-	.long sys_openat
-	.long sys_mkdirat
-	.long sys_mknodat		/* 325 */
-	.long sys_fchownat
-	.long sys_futimesat
-	.long sys_fstatat64
-	.long sys_unlinkat
-	.long sys_renameat		/* 330 */
-	.long sys_linkat
-	.long sys_symlinkat
-	.long sys_readlinkat
-	.long sys_fchmodat
-	.long sys_faccessat		/* 335 */
-	.long sys_pselect6
-	.long sys_ppoll
-	.long sys_unshare
-	.long sys_set_robust_list
-	.long sys_get_robust_list	/* 340 */
-	.long sys_splice
-	.long sys_sync_file_range
-	.long sys_tee
-	.long sys_vmsplice
-	.long sys_move_pages		/* 345 */
-	.long sys_getcpu
-	.long sys_epoll_pwait
-	.long sys_utimensat
-	.long sys_signalfd
-	.long sys_timerfd_create	/* 350 */
-	.long sys_eventfd
-	.long sys_fallocate
-	.long sys_timerfd_settime
-	.long sys_timerfd_gettime
-	.long sys_signalfd4		/* 355 */
-	.long sys_eventfd2
-	.long sys_epoll_create1
-	.long sys_dup3
-	.long sys_pipe2
-	.long sys_inotify_init1		/* 360 */
-	.long sys_preadv
-	.long sys_pwritev
-	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_event_open
-	.long sys_recvmmsg		/* 365 */
-	.long sys_accept4
-	.long sys_fanotify_init
-	.long sys_fanotify_mark
-	.long sys_prlimit64
-	.long sys_name_to_handle_at	/* 370 */
-	.long sys_open_by_handle_at
-	.long sys_clock_adjtime
-	.long sys_syncfs
-	.long sys_sendmmsg
-	.long sys_setns			/* 375 */
-	.long sys_process_vm_readv
-	.long sys_process_vm_writev
-	.long sys_kcmp
-	.long sys_finit_module
-	.long sys_sched_getattr		/* 380 */
-	.long sys_sched_setattr
-	.long sys_renameat2
-	.long sys_seccomp
-	.long sys_getrandom
-	.long sys_memfd_create		/* 385 */
-	.long sys_bpf
-	.long sys_execveat
-	.long sys_userfaultfd
-	.long sys_membarrier
-	.long sys_mlock2		/* 390 */
-	.long sys_copy_file_range
-	.long sys_preadv2
-	.long sys_pwritev2

arch/sh/kernel/traps_64.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/traps_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- * Copyright (C) 2003, 2004  Richard Curnow
- */
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/kallsyms.h>
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/module.h>
-#include <linux/perf_event.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/alignment.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/fpu.h>
-
-static int read_opcode(reg_size_t pc, insn_size_t *result_opcode, int from_user_mode)
-{
-	int get_user_error;
-	unsigned long aligned_pc;
-	insn_size_t opcode;
-
-	if ((pc & 3) == 1) {
-		/* SHmedia */
-		aligned_pc = pc & ~3;
-		if (from_user_mode) {
-			if (!access_ok(aligned_pc, sizeof(insn_size_t))) {
-				get_user_error = -EFAULT;
-			} else {
-				get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
-				*result_opcode = opcode;
-			}
-			return get_user_error;
-		} else {
-			/* If the fault was in the kernel, we can either read
-			 * this directly, or if not, we fault.
-			*/
-			*result_opcode = *(insn_size_t *)aligned_pc;
-			return 0;
-		}
-	} else if ((pc & 1) == 0) {
-		/* SHcompact */
-		/* TODO : provide handling for this.  We don't really support
-		   user-mode SHcompact yet, and for a kernel fault, this would
-		   have to come from a module built for SHcompact.  */
-		return -EFAULT;
-	} else {
-		/* misaligned */
-		return -EFAULT;
-	}
-}
-
-static int address_is_sign_extended(__u64 a)
-{
-	__u64 b;
-#if (NEFF == 32)
-	b = (__u64)(__s64)(__s32)(a & 0xffffffffUL);
-	return (b == a) ? 1 : 0;
-#else
-#error "Sign extend check only works for NEFF==32"
-#endif
-}
-
-/* return -1 for fault, 0 for OK */
-static int generate_and_check_address(struct pt_regs *regs,
-				      insn_size_t opcode,
-				      int displacement_not_indexed,
-				      int width_shift,
-				      __u64 *address)
-{
-	__u64 base_address, addr;
-	int basereg;
-
-	switch (1 << width_shift) {
-	case 1: inc_unaligned_byte_access(); break;
-	case 2: inc_unaligned_word_access(); break;
-	case 4: inc_unaligned_dword_access(); break;
-	case 8: inc_unaligned_multi_access(); break;
-	}
-
-	basereg = (opcode >> 20) & 0x3f;
-	base_address = regs->regs[basereg];
-	if (displacement_not_indexed) {
-		__s64 displacement;
-		displacement = (opcode >> 10) & 0x3ff;
-		displacement = sign_extend64(displacement, 9);
-		addr = (__u64)((__s64)base_address + (displacement << width_shift));
-	} else {
-		__u64 offset;
-		int offsetreg;
-		offsetreg = (opcode >> 10) & 0x3f;
-		offset = regs->regs[offsetreg];
-		addr = base_address + offset;
-	}
-
-	/* Check sign extended */
-	if (!address_is_sign_extended(addr))
-		return -1;
-
-	/* Check accessible.  For misaligned access in the kernel, assume the
-	   address is always accessible (and if not, just fault when the
-	   load/store gets done.) */
-	if (user_mode(regs)) {
-		inc_unaligned_user_access();
-
-		if (addr >= TASK_SIZE)
-			return -1;
-	} else
-		inc_unaligned_kernel_access();
-
-	*address = addr;
-
-	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, addr);
-	unaligned_fixups_notify(current, opcode, regs);
-
-	return 0;
-}
-
-static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
-{
-	unsigned short x;
-	unsigned char *p, *q;
-	p = (unsigned char *) (int) address;
-	q = (unsigned char *) &x;
-	q[0] = p[0];
-	q[1] = p[1];
-
-	if (do_sign_extend) {
-		*result = (__u64)(__s64) *(short *) &x;
-	} else {
-		*result = (__u64) x;
-	}
-}
-
-static void misaligned_kernel_word_store(__u64 address, __u64 value)
-{
-	unsigned short x;
-	unsigned char *p, *q;
-	p = (unsigned char *) (int) address;
-	q = (unsigned char *) &x;
-
-	x = (__u16) value;
-	p[0] = q[0];
-	p[1] = q[1];
-}
-
-static int misaligned_load(struct pt_regs *regs,
-			   insn_size_t opcode,
-			   int displacement_not_indexed,
-			   int width_shift,
-			   int do_sign_extend)
-{
-	/* Return -1 for a fault, 0 for OK */
-	int error;
-	int destreg;
-	__u64 address;
-
-	error = generate_and_check_address(regs, opcode,
-			displacement_not_indexed, width_shift, &address);
-	if (error < 0)
-		return error;
-
-	destreg = (opcode >> 4) & 0x3f;
-	if (user_mode(regs)) {
-		__u64 buffer;
-
-		if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
-			return -1;
-		}
-
-		if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
-			return -1; /* fault */
-		}
-		switch (width_shift) {
-		case 1:
-			if (do_sign_extend) {
-				regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer;
-			} else {
-				regs->regs[destreg] = (__u64) *(__u16 *) &buffer;
-			}
-			break;
-		case 2:
-			regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer;
-			break;
-		case 3:
-			regs->regs[destreg] = buffer;
-			break;
-		default:
-			printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
-				width_shift, (unsigned long) regs->pc);
-			break;
-		}
-	} else {
-		/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
-		__u64 lo, hi;
-
-		switch (width_shift) {
-		case 1:
-			misaligned_kernel_word_load(address, do_sign_extend, &regs->regs[destreg]);
-			break;
-		case 2:
-			asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address));
-			asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address));
-			regs->regs[destreg] = lo | hi;
-			break;
-		case 3:
-			asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address));
-			asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address));
-			regs->regs[destreg] = lo | hi;
-			break;
-
-		default:
-			printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n",
-				width_shift, (unsigned long) regs->pc);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int misaligned_store(struct pt_regs *regs,
-			    insn_size_t opcode,
-			    int displacement_not_indexed,
-			    int width_shift)
-{
-	/* Return -1 for a fault, 0 for OK */
-	int error;
-	int srcreg;
-	__u64 address;
-
-	error = generate_and_check_address(regs, opcode,
-			displacement_not_indexed, width_shift, &address);
-	if (error < 0)
-		return error;
-
-	srcreg = (opcode >> 4) & 0x3f;
-	if (user_mode(regs)) {
-		__u64 buffer;
-
-		if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
-			return -1;
-		}
-
-		switch (width_shift) {
-		case 1:
-			*(__u16 *) &buffer = (__u16) regs->regs[srcreg];
-			break;
-		case 2:
-			*(__u32 *) &buffer = (__u32) regs->regs[srcreg];
-			break;
-		case 3:
-			buffer = regs->regs[srcreg];
-			break;
-		default:
-			printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
-				width_shift, (unsigned long) regs->pc);
-			break;
-		}
-
-		if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
-			return -1; /* fault */
-		}
-	} else {
-		/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
-		__u64 val = regs->regs[srcreg];
-
-		switch (width_shift) {
-		case 1:
-			misaligned_kernel_word_store(address, val);
-			break;
-		case 2:
-			asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address));
-			asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address));
-			break;
-		case 3:
-			asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address));
-			asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address));
-			break;
-
-		default:
-			printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n",
-				width_shift, (unsigned long) regs->pc);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/* Never need to fix up misaligned FPU accesses within the kernel since that's a real
-   error. */
-static int misaligned_fpu_load(struct pt_regs *regs,
-			   insn_size_t opcode,
-			   int displacement_not_indexed,
-			   int width_shift,
-			   int do_paired_load)
-{
-	/* Return -1 for a fault, 0 for OK */
-	int error;
-	int destreg;
-	__u64 address;
-
-	error = generate_and_check_address(regs, opcode,
-			displacement_not_indexed, width_shift, &address);
-	if (error < 0)
-		return error;
-
-	destreg = (opcode >> 4) & 0x3f;
-	if (user_mode(regs)) {
-		__u64 buffer;
-		__u32 buflo, bufhi;
-
-		if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
-			return -1;
-		}
-
-		if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) {
-			return -1; /* fault */
-		}
-		/* 'current' may be the current owner of the FPU state, so
-		   context switch the registers into memory so they can be
-		   indexed by register number. */
-		if (last_task_used_math == current) {
-			enable_fpu();
-			save_fpu(current);
-			disable_fpu();
-			last_task_used_math = NULL;
-			regs->sr |= SR_FD;
-		}
-
-		buflo = *(__u32*) &buffer;
-		bufhi = *(1 + (__u32*) &buffer);
-
-		switch (width_shift) {
-		case 2:
-			current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
-			break;
-		case 3:
-			if (do_paired_load) {
-				current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
-				current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
-			} else {
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-				current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi;
-				current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo;
-#else
-				current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
-				current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
-#endif
-			}
-			break;
-		default:
-			printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n",
-				width_shift, (unsigned long) regs->pc);
-			break;
-		}
-		return 0;
-	} else {
-		die ("Misaligned FPU load inside kernel", regs, 0);
-		return -1;
-	}
-}
-
-static int misaligned_fpu_store(struct pt_regs *regs,
-			   insn_size_t opcode,
-			   int displacement_not_indexed,
-			   int width_shift,
-			   int do_paired_load)
-{
-	/* Return -1 for a fault, 0 for OK */
-	int error;
-	int srcreg;
-	__u64 address;
-
-	error = generate_and_check_address(regs, opcode,
-			displacement_not_indexed, width_shift, &address);
-	if (error < 0)
-		return error;
-
-	srcreg = (opcode >> 4) & 0x3f;
-	if (user_mode(regs)) {
-		__u64 buffer;
-		/* Initialise these to NaNs. */
-		__u32 buflo=0xffffffffUL, bufhi=0xffffffffUL;
-
-		if (!access_ok((unsigned long) address, 1UL<<width_shift)) {
-			return -1;
-		}
-
-		/* 'current' may be the current owner of the FPU state, so
-		   context switch the registers into memory so they can be
-		   indexed by register number. */
-		if (last_task_used_math == current) {
-			enable_fpu();
-			save_fpu(current);
-			disable_fpu();
-			last_task_used_math = NULL;
-			regs->sr |= SR_FD;
-		}
-
-		switch (width_shift) {
-		case 2:
-			buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
-			break;
-		case 3:
-			if (do_paired_load) {
-				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
-				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
-			} else {
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg];
-				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
-#else
-				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
-				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
-#endif
-			}
-			break;
-		default:
-			printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n",
-				width_shift, (unsigned long) regs->pc);
-			break;
-		}
-
-		*(__u32*) &buffer = buflo;
-		*(1 + (__u32*) &buffer) = bufhi;
-		if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
-			return -1; /* fault */
-		}
-		return 0;
-	} else {
-		die ("Misaligned FPU load inside kernel", regs, 0);
-		return -1;
-	}
-}
-
-static int misaligned_fixup(struct pt_regs *regs)
-{
-	insn_size_t opcode;
-	int error;
-	int major, minor;
-	unsigned int user_action;
-
-	user_action = unaligned_user_action();
-	if (!(user_action & UM_FIXUP))
-		return -1;
-
-	error = read_opcode(regs->pc, &opcode, user_mode(regs));
-	if (error < 0) {
-		return error;
-	}
-	major = (opcode >> 26) & 0x3f;
-	minor = (opcode >> 16) & 0xf;
-
-	switch (major) {
-		case (0x84>>2): /* LD.W */
-			error = misaligned_load(regs, opcode, 1, 1, 1);
-			break;
-		case (0xb0>>2): /* LD.UW */
-			error = misaligned_load(regs, opcode, 1, 1, 0);
-			break;
-		case (0x88>>2): /* LD.L */
-			error = misaligned_load(regs, opcode, 1, 2, 1);
-			break;
-		case (0x8c>>2): /* LD.Q */
-			error = misaligned_load(regs, opcode, 1, 3, 0);
-			break;
-
-		case (0xa4>>2): /* ST.W */
-			error = misaligned_store(regs, opcode, 1, 1);
-			break;
-		case (0xa8>>2): /* ST.L */
-			error = misaligned_store(regs, opcode, 1, 2);
-			break;
-		case (0xac>>2): /* ST.Q */
-			error = misaligned_store(regs, opcode, 1, 3);
-			break;
-
-		case (0x40>>2): /* indexed loads */
-			switch (minor) {
-				case 0x1: /* LDX.W */
-					error = misaligned_load(regs, opcode, 0, 1, 1);
-					break;
-				case 0x5: /* LDX.UW */
-					error = misaligned_load(regs, opcode, 0, 1, 0);
-					break;
-				case 0x2: /* LDX.L */
-					error = misaligned_load(regs, opcode, 0, 2, 1);
-					break;
-				case 0x3: /* LDX.Q */
-					error = misaligned_load(regs, opcode, 0, 3, 0);
-					break;
-				default:
-					error = -1;
-					break;
-			}
-			break;
-
-		case (0x60>>2): /* indexed stores */
-			switch (minor) {
-				case 0x1: /* STX.W */
-					error = misaligned_store(regs, opcode, 0, 1);
-					break;
-				case 0x2: /* STX.L */
-					error = misaligned_store(regs, opcode, 0, 2);
-					break;
-				case 0x3: /* STX.Q */
-					error = misaligned_store(regs, opcode, 0, 3);
-					break;
-				default:
-					error = -1;
-					break;
-			}
-			break;
-
-		case (0x94>>2): /* FLD.S */
-			error = misaligned_fpu_load(regs, opcode, 1, 2, 0);
-			break;
-		case (0x98>>2): /* FLD.P */
-			error = misaligned_fpu_load(regs, opcode, 1, 3, 1);
-			break;
-		case (0x9c>>2): /* FLD.D */
-			error = misaligned_fpu_load(regs, opcode, 1, 3, 0);
-			break;
-		case (0x1c>>2): /* floating indexed loads */
-			switch (minor) {
-			case 0x8: /* FLDX.S */
-				error = misaligned_fpu_load(regs, opcode, 0, 2, 0);
-				break;
-			case 0xd: /* FLDX.P */
-				error = misaligned_fpu_load(regs, opcode, 0, 3, 1);
-				break;
-			case 0x9: /* FLDX.D */
-				error = misaligned_fpu_load(regs, opcode, 0, 3, 0);
-				break;
-			default:
-				error = -1;
-				break;
-			}
-			break;
-		case (0xb4>>2): /* FLD.S */
-			error = misaligned_fpu_store(regs, opcode, 1, 2, 0);
-			break;
-		case (0xb8>>2): /* FLD.P */
-			error = misaligned_fpu_store(regs, opcode, 1, 3, 1);
-			break;
-		case (0xbc>>2): /* FLD.D */
-			error = misaligned_fpu_store(regs, opcode, 1, 3, 0);
-			break;
-		case (0x3c>>2): /* floating indexed stores */
-			switch (minor) {
-			case 0x8: /* FSTX.S */
-				error = misaligned_fpu_store(regs, opcode, 0, 2, 0);
-				break;
-			case 0xd: /* FSTX.P */
-				error = misaligned_fpu_store(regs, opcode, 0, 3, 1);
-				break;
-			case 0x9: /* FSTX.D */
-				error = misaligned_fpu_store(regs, opcode, 0, 3, 0);
-				break;
-			default:
-				error = -1;
-				break;
-			}
-			break;
-
-		default:
-			/* Fault */
-			error = -1;
-			break;
-	}
-
-	if (error < 0) {
-		return error;
-	} else {
-		regs->pc += 4; /* Skip the instruction that's just been emulated */
-		return 0;
-	}
-}
-
-static void do_unhandled_exception(int signr, char *str, unsigned long error,
-				   struct pt_regs *regs)
-{
-	if (user_mode(regs))
-		force_sig(signr);
-
-	die_if_no_fixup(str, regs, error);
-}
-
-#define DO_ERROR(signr, str, name) \
-asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \
-{ \
-	do_unhandled_exception(signr, str, error_code, regs); \
-}
-
-DO_ERROR(SIGILL,  "illegal slot instruction", illegal_slot_inst)
-DO_ERROR(SIGSEGV, "address error (exec)", address_error_exec)
-
-#if defined(CONFIG_SH64_ID2815_WORKAROUND)
-
-#define OPCODE_INVALID      0
-#define OPCODE_USER_VALID   1
-#define OPCODE_PRIV_VALID   2
-
-/* getcon/putcon - requires checking which control register is referenced. */
-#define OPCODE_CTRL_REG     3
-
-/* Table of valid opcodes for SHmedia mode.
-   Form a 10-bit value by concatenating the major/minor opcodes i.e.
-   opcode[31:26,20:16].  The 6 MSBs of this value index into the following
-   array.  The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to
-   LSBs==4'b0000 etc). */
-static unsigned long shmedia_opcode_table[64] = {
-	0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015,
-	0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000,
-	0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000,
-	0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000,
-	0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
-	0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
-	0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,
-	0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000
-};
-
-/* Workaround SH5-101 cut2 silicon defect #2815 :
-   in some situations, inter-mode branches from SHcompact -> SHmedia
-   which should take ITLBMISS or EXECPROT exceptions at the target
-   falsely take RESINST at the target instead. */
-void do_reserved_inst(unsigned long error_code, struct pt_regs *regs)
-{
-	insn_size_t opcode = 0x6ff4fff0; /* guaranteed reserved opcode */
-	unsigned long pc, aligned_pc;
-	unsigned long index, shift;
-	unsigned long major, minor, combined;
-	unsigned long reserved_field;
-	int opcode_state;
-	int get_user_error;
-	int signr = SIGILL;
-	char *exception_name = "reserved_instruction";
-
-	pc = regs->pc;
-
-	/* SHcompact is not handled */
-	if (unlikely((pc & 3) == 0))
-		goto out;
-
-	/* SHmedia : check for defect.  This requires executable vmas
-	   to be readable too. */
-	aligned_pc = pc & ~3;
-	if (!access_ok(aligned_pc, sizeof(insn_size_t)))
-		get_user_error = -EFAULT;
-	else
-		get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc);
-
-	if (get_user_error < 0) {
-		/*
-		 * Error trying to read opcode.  This typically means a
-		 * real fault, not a RESINST any more.  So change the
-		 * codes.
-		 */
-		exception_name = "address error (exec)";
-		signr = SIGSEGV;
-		goto out;
-	}
-
-	/* These bits are currently reserved as zero in all valid opcodes */
-	reserved_field = opcode & 0xf;
-	if (unlikely(reserved_field))
-		goto out;	/* invalid opcode */
-
-	major = (opcode >> 26) & 0x3f;
-	minor = (opcode >> 16) & 0xf;
-	combined = (major << 4) | minor;
-	index = major;
-	shift = minor << 1;
-	opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3;
-	switch (opcode_state) {
-	case OPCODE_INVALID:
-		/* Trap. */
-		break;
-	case OPCODE_USER_VALID:
-		/*
-		 * Restart the instruction: the branch to the instruction
-		 * will now be from an RTE not from SHcompact so the
-		 * silicon defect won't be triggered.
-		 */
-		return;
-	case OPCODE_PRIV_VALID:
-		if (!user_mode(regs)) {
-			/*
-			 * Should only ever get here if a module has
-			 * SHcompact code inside it. If so, the same fix
-			 * up is needed.
-			 */
-			return; /* same reason */
-		}
-
-		/*
-		 * Otherwise, user mode trying to execute a privileged
-		 * instruction - fall through to trap.
-		 */
-		break;
-	case OPCODE_CTRL_REG:
-		/* If in privileged mode, return as above. */
-		if (!user_mode(regs))
-			return;
-
-		/* In user mode ... */
-		if (combined == 0x9f) { /* GETCON */
-			unsigned long regno = (opcode >> 20) & 0x3f;
-
-			if (regno >= 62)
-				return;
-
-			/* reserved/privileged control register => trap */
-		} else if (combined == 0x1bf) { /* PUTCON */
-			unsigned long regno = (opcode >> 4) & 0x3f;
-
-			if (regno >= 62)
-				return;
-
-			/* reserved/privileged control register => trap */
-		}
-
-		break;
-	default:
-		/* Fall through to trap. */
-		break;
-	}
-
-out:
-	do_unhandled_exception(signr, exception_name, error_code, regs);
-}
-
-#else /* CONFIG_SH64_ID2815_WORKAROUND */
-
-/* If the workaround isn't needed, this is just a straightforward reserved
-   instruction */
-DO_ERROR(SIGILL, "reserved instruction", reserved_inst)
-
-#endif /* CONFIG_SH64_ID2815_WORKAROUND */
-
-/* Called with interrupts disabled */
-asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
-{
-	die_if_kernel("exception", regs, ex);
-}
-
-asmlinkage int do_unknown_trapa(unsigned long scId, struct pt_regs *regs)
-{
-	/* Syscall debug */
-	printk("System call ID error: [0x1#args:8 #syscall:16  0x%lx]\n", scId);
-
-	die_if_kernel("unknown trapa", regs, scId);
-
-	return -ENOSYS;
-}
-
-/* Implement misaligned load/store handling for kernel (and optionally for user
-   mode too).  Limitation : only SHmedia mode code is handled - there is no
-   handling at all for misaligned accesses occurring in SHcompact code yet. */
-
-asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs)
-{
-	if (misaligned_fixup(regs) < 0)
-		do_unhandled_exception(SIGSEGV, "address error(load)",
-				       error_code, regs);
-}
-
-asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs)
-{
-	if (misaligned_fixup(regs) < 0)
-		do_unhandled_exception(SIGSEGV, "address error(store)",
-				error_code, regs);
-}
-
-asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs)
-{
-	u64 peek_real_address_q(u64 addr);
-	u64 poke_real_address_q(u64 addr, u64 val);
-	unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010;
-	unsigned long long exp_cause;
-	/* It's not worth ioremapping the debug module registers for the amount
-	   of access we make to them - just go direct to their physical
-	   addresses. */
-	exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY);
-	if (exp_cause & ~4)
-		printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n",
-			(unsigned long)(exp_cause & 0xffffffff));
-	show_state();
-	/* Clear all DEBUGINT causes */
-	poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
-}
-
-void per_cpu_trap_init(void)
-{
-	/* Nothing to do for now, VBR initialization later. */
-}

arch/sh/kernel/vmlinux.lds.S

@@ -3,14 +3,7 @@
  * ld script to make SuperH Linux kernel
  * Written by Niibe Yutaka and Paul Mundt
  */
-#ifdef CONFIG_SUPERH64
-#define LOAD_OFFSET	PAGE_OFFSET
-OUTPUT_ARCH(sh:sh5)
-#else
-#define LOAD_OFFSET	0
 OUTPUT_ARCH(sh)
-#endif
-
 #include <asm/thread_info.h>
 #include <asm/cache.h>
 #include <asm/vmlinux.lds.h>
@@ -28,14 +21,13 @@ SECTIONS
 
 	_text = .;		/* Text and read-only data */
 
-	.empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) {
+	.empty_zero_page : AT(ADDR(.empty_zero_page)) {
 		*(.empty_zero_page)
 	} = 0
 
-	.text : AT(ADDR(.text) - LOAD_OFFSET) {
+	.text : AT(ADDR(.text)) {
 		HEAD_TEXT
 		TEXT_TEXT
-		EXTRA_TEXT
 		SCHED_TEXT
 		CPUIDLE_TEXT
 		LOCK_TEXT
@@ -62,7 +54,7 @@ SECTIONS
 	INIT_DATA_SECTION(16)
 
 	. = ALIGN(4);
-	.machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
+	.machvec.init : AT(ADDR(.machvec.init)) {
 		__machvec_start = .;
 		*(.machvec.init)
 		__machvec_end = .;
@@ -74,8 +66,8 @@ SECTIONS
 	 * .exit.text is discarded at runtime, not link time, to deal with
 	 * references from __bug_table
 	 */
-	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT }
-	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
+	.exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
+	.exit.data : AT(ADDR(.exit.data)) { EXIT_DATA }
 
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;

arch/sh/lib/delay.c

@@ -29,6 +29,7 @@ void __delay(unsigned long loops)
 		: "0" (loops)
 		: "t");
 }
+EXPORT_SYMBOL(__delay);
 
 inline void __const_udelay(unsigned long xloops)
 {

arch/sh/lib64/Makefile

-#
-# Makefile for the SH-5 specific library files..
-#
-# Copyright (C) 2000, 2001  Paolo Alberelli
-# Copyright (C) 2003 - 2008  Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-# Panic should really be compiled as PIC
-lib-y  := udelay.o panic.o memcpy.o memset.o \
-	  copy_user_memcpy.o copy_page.o strcpy.o strlen.o
-
-# Extracted from libgcc
-lib-y	+= udivsi3.o udivdi3.o sdivsi3.o

arch/sh/lib64/copy_page.S

-/*
-   Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
-
-   This file is subject to the terms and conditions of the GNU General Public
-   License.  See the file "COPYING" in the main directory of this archive
-   for more details.
-
-   Tight version of mempy for the case of just copying a page.
-   Prefetch strategy empirically optimised against RTL simulations
-   of SH5-101 cut2 eval chip with Cayman board DDR memory.
-
-   Parameters:
-   r2 : destination effective address (start of page)
-   r3 : source effective address (start of page)
-
-   Always copies 4096 bytes.
-
-   Points to review.
-   * Currently the prefetch is 4 lines ahead and the alloco is 2 lines ahead.
-     It seems like the prefetch needs to be at at least 4 lines ahead to get
-     the data into the cache in time, and the allocos contend with outstanding
-     prefetches for the same cache set, so it's better to have the numbers
-     different.
-   */
-
-	.section .text..SHmedia32,"ax"
-	.little
-
-	.balign 8
-	.global copy_page
-copy_page:
-
-	/* Copy 4096 bytes worth of data from r3 to r2.
-	   Do prefetches 4 lines ahead.
-	   Do alloco 2 lines ahead */
-
-	pta 1f, tr1
-	pta 2f, tr2
-	pta 3f, tr3
-	ptabs r18, tr0
-
-#if 0
-	/* TAKum03020 */
-	ld.q r3, 0x00, r63
-	ld.q r3, 0x20, r63
-	ld.q r3, 0x40, r63
-	ld.q r3, 0x60, r63
-#endif
-	alloco r2, 0x00
-	synco		! TAKum03020
-	alloco r2, 0x20
-	synco		! TAKum03020
-
-	movi 3968, r6
-	add  r2, r6, r6
-	addi r6, 64, r7
-	addi r7, 64, r8
-	sub r3, r2, r60
-	addi r60, 8, r61
-	addi r61, 8, r62
-	addi r62, 8, r23
-	addi r60, 0x80, r22
-
-/* Minimal code size.  The extra branches inside the loop don't cost much
-   because they overlap with the time spent waiting for prefetches to
-   complete. */
-1:
-#if 0
-	/* TAKum03020 */
-	bge/u r2, r6, tr2  ! skip prefetch for last 4 lines
-	ldx.q r2, r22, r63 ! prefetch 4 lines hence
-#endif
-2:
-	bge/u r2, r7, tr3  ! skip alloco for last 2 lines
-	alloco r2, 0x40    ! alloc destination line 2 lines ahead
-	synco		! TAKum03020
-3:
-	ldx.q r2, r60, r36
-	ldx.q r2, r61, r37
-	ldx.q r2, r62, r38
-	ldx.q r2, r23, r39
-	st.q  r2,   0, r36
-	st.q  r2,   8, r37
-	st.q  r2,  16, r38
-	st.q  r2,  24, r39
-	addi r2, 32, r2
-	bgt/l r8, r2, tr1
-
-	blink tr0, r63	   ! return

arch/sh/lib64/copy_user_memcpy.S

-! SPDX-License-Identifier: GPL-2.0
-!
-! Fast SH memcpy
-!
-! by Toshiyasu Morita (tm@netcom.com)
-! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
-! SH5 code Copyright 2002 SuperH Ltd.
-!
-! Entry: ARG0: destination pointer
-!        ARG1: source pointer
-!        ARG2: byte count
-!
-! Exit:  RESULT: destination pointer
-!        any other registers in the range r0-r7: trashed
-!
-! Notes: Usually one wants to do small reads and write a longword, but
-!        unfortunately it is difficult in some cases to concatanate bytes
-!        into a longword on the SH, so this does a longword read and small
-!        writes.
-!
-! This implementation makes two assumptions about how it is called:
-!
-! 1.: If the byte count is nonzero, the address of the last byte to be
-!     copied is unsigned greater than the address of the first byte to
-!     be copied.  This could be easily swapped for a signed comparison,
-!     but the algorithm used needs some comparison.
-!
-! 2.: When there are two or three bytes in the last word of an 11-or-more
-!     bytes memory chunk to b copied, the rest of the word can be read
-!     without side effects.
-!     This could be easily changed by increasing the minimum size of
-!     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
-!     however, this would cost a few extra cyles on average.
-!     For SHmedia, the assumption is that any quadword can be read in its
-!     enirety if at least one byte is included in the copy.
-
-/* Imported into Linux kernel by Richard Curnow.  This is used to implement the
-   __copy_user function in the general case, so it has to be a distinct
-   function from intra-kernel memcpy to allow for exception fix-ups in the
-   event that the user pointer is bad somewhere in the copy (e.g. due to
-   running off the end of the vma).
-
-   Note, this algorithm will be slightly wasteful in the case where the source
-   and destination pointers are equally aligned, because the stlo/sthi pairs
-   could then be merged back into single stores.  If there are a lot of cache
-   misses, this is probably offset by the stall lengths on the preloads.
-
-*/
-
-/* NOTE : Prefetches removed and allocos guarded by synco to avoid TAKum03020
- * erratum.  The first two prefetches are nop-ed out to avoid upsetting the
- * instruction counts used in the jump address calculation.
- * */
-
-	.section .text..SHmedia32,"ax"
-	.little
-	.balign 32
-	.global copy_user_memcpy
-	.global copy_user_memcpy_end
-copy_user_memcpy:
-
-#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
-#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
-#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
-#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
-
-	nop ! ld.b r3,0,r63 ! TAKum03020
-	pta/l Large,tr0
-	movi 25,r0
-	bgeu/u r4,r0,tr0
-	nsb r4,r0
-	shlli r0,5,r0
-	movi (L1-L0+63*32 + 1) & 0xffff,r1
-	sub r1, r0, r0
-L0:	ptrel r0,tr0
-	add r2,r4,r5
-	ptabs r18,tr1
-	add r3,r4,r6
-	blink tr0,r63
-
-/* Rearranged to make cut2 safe */
-	.balign 8
-L4_7:	/* 4..7 byte memcpy cntd. */
-	stlo.l r2, 0, r0
-	or r6, r7, r6
-	sthi.l r5, -1, r6
-	stlo.l r5, -4, r6
-	blink tr1,r63
-
-	.balign 8
-L1:	/* 0 byte memcpy */
-	nop
-	blink tr1,r63
-	nop
-	nop
-	nop
-	nop
-
-L2_3:	/* 2 or 3 byte memcpy cntd. */
-	st.b r5,-1,r6
-	blink tr1,r63
-
-	/* 1 byte memcpy */
-	ld.b r3,0,r0
-	st.b r2,0,r0
-	blink tr1,r63
-
-L8_15:	/* 8..15 byte memcpy cntd. */
-	stlo.q r2, 0, r0
-	or r6, r7, r6
-	sthi.q r5, -1, r6
-	stlo.q r5, -8, r6
-	blink tr1,r63
-
-	/* 2 or 3 byte memcpy */
-	ld.b r3,0,r0
-	nop ! ld.b r2,0,r63 ! TAKum03020
-	ld.b r3,1,r1
-	st.b r2,0,r0
-	pta/l L2_3,tr0
-	ld.b r6,-1,r6
-	st.b r2,1,r1
-	blink tr0, r63
-
-	/* 4 .. 7 byte memcpy */
-	LDUAL (r3, 0, r0, r1)
-	pta L4_7, tr0
-	ldlo.l r6, -4, r7
-	or r0, r1, r0
-	sthi.l r2, 3, r0
-	ldhi.l r6, -1, r6
-	blink tr0, r63
-
-	/* 8 .. 15 byte memcpy */
-	LDUAQ (r3, 0, r0, r1)
-	pta L8_15, tr0
-	ldlo.q r6, -8, r7
-	or r0, r1, r0
-	sthi.q r2, 7, r0
-	ldhi.q r6, -1, r6
-	blink tr0, r63
-
-	/* 16 .. 24 byte memcpy */
-	LDUAQ (r3, 0, r0, r1)
-	LDUAQ (r3, 8, r8, r9)
-	or r0, r1, r0
-	sthi.q r2, 7, r0
-	or r8, r9, r8
-	sthi.q r2, 15, r8
-	ldlo.q r6, -8, r7
-	ldhi.q r6, -1, r6
-	stlo.q r2, 8, r8
-	stlo.q r2, 0, r0
-	or r6, r7, r6
-	sthi.q r5, -1, r6
-	stlo.q r5, -8, r6
-	blink tr1,r63
-
-Large:
-	! ld.b r2, 0, r63 ! TAKum03020
-	pta/l  Loop_ua, tr1
-	ori r3, -8, r7
-	sub r2, r7, r22
-	sub r3, r2, r6
-	add r2, r4, r5
-	ldlo.q r3, 0, r0
-	addi r5, -16, r5
-	movi 64+8, r27 ! could subtract r7 from that.
-	stlo.q r2, 0, r0
-	sthi.q r2, 7, r0
-	ldx.q r22, r6, r0
-	bgtu/l r27, r4, tr1
-
-	addi r5, -48, r27
-	pta/l Loop_line, tr0
-	addi r6, 64, r36
-	addi r6, -24, r19
-	addi r6, -16, r20
-	addi r6, -8, r21
-
-Loop_line:
-	! ldx.q r22, r36, r63 ! TAKum03020
-	alloco r22, 32
-	synco
-	addi r22, 32, r22
-	ldx.q r22, r19, r23
-	sthi.q r22, -25, r0
-	ldx.q r22, r20, r24
-	ldx.q r22, r21, r25
-	stlo.q r22, -32, r0
-	ldx.q r22, r6,  r0
-	sthi.q r22, -17, r23
-	sthi.q r22,  -9, r24
-	sthi.q r22,  -1, r25
-	stlo.q r22, -24, r23
-	stlo.q r22, -16, r24
-	stlo.q r22,  -8, r25
-	bgeu r27, r22, tr0
-
-Loop_ua:
-	addi r22, 8, r22
-	sthi.q r22, -1, r0
-	stlo.q r22, -8, r0
-	ldx.q r22, r6, r0
-	bgtu/l r5, r22, tr1
-
-	add r3, r4, r7
-	ldlo.q r7, -8, r1
-	sthi.q r22, 7, r0
-	ldhi.q r7, -1, r7
-	ptabs r18,tr1
-	stlo.q r22, 0, r0
-	or r1, r7, r1
-	sthi.q r5, 15, r1
-	stlo.q r5, 8, r1
-	blink tr1, r63
-copy_user_memcpy_end:
-	nop

arch/sh/lib64/memcpy.S

-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-!
-! Fast SH memcpy
-!
-! by Toshiyasu Morita (tm@netcom.com)
-! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
-! SH5 code Copyright 2002 SuperH Ltd.
-!
-! Entry: ARG0: destination pointer
-!        ARG1: source pointer
-!        ARG2: byte count
-!
-! Exit:  RESULT: destination pointer
-!        any other registers in the range r0-r7: trashed
-!
-! Notes: Usually one wants to do small reads and write a longword, but
-!        unfortunately it is difficult in some cases to concatanate bytes
-!        into a longword on the SH, so this does a longword read and small
-!        writes.
-!
-! This implementation makes two assumptions about how it is called:
-!
-! 1.: If the byte count is nonzero, the address of the last byte to be
-!     copied is unsigned greater than the address of the first byte to
-!     be copied.  This could be easily swapped for a signed comparison,
-!     but the algorithm used needs some comparison.
-!
-! 2.: When there are two or three bytes in the last word of an 11-or-more
-!     bytes memory chunk to b copied, the rest of the word can be read
-!     without side effects.
-!     This could be easily changed by increasing the minimum size of
-!     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
-!     however, this would cost a few extra cyles on average.
-!     For SHmedia, the assumption is that any quadword can be read in its
-!     enirety if at least one byte is included in the copy.
-!
-
-	.section .text..SHmedia32,"ax"
-	.globl	memcpy
-	.type	memcpy, @function
-	.align	5
-
-memcpy:
-
-#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
-#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
-#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
-#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
-
-	ld.b r3,0,r63
-	pta/l Large,tr0
-	movi 25,r0
-	bgeu/u r4,r0,tr0
-	nsb r4,r0
-	shlli r0,5,r0
-	movi (L1-L0+63*32 + 1) & 0xffff,r1
-	sub r1, r0, r0
-L0:	ptrel r0,tr0
-	add r2,r4,r5
-	ptabs r18,tr1
-	add r3,r4,r6
-	blink tr0,r63
-	
-/* Rearranged to make cut2 safe */
-	.balign 8
-L4_7:	/* 4..7 byte memcpy cntd. */
-	stlo.l r2, 0, r0
-	or r6, r7, r6
-	sthi.l r5, -1, r6
-	stlo.l r5, -4, r6
-	blink tr1,r63
-
-	.balign 8
-L1:	/* 0 byte memcpy */
-	nop
-	blink tr1,r63
-	nop
-	nop
-	nop
-	nop
-
-L2_3:	/* 2 or 3 byte memcpy cntd. */
-	st.b r5,-1,r6
-	blink tr1,r63
-
-	/* 1 byte memcpy */
-	ld.b r3,0,r0
-	st.b r2,0,r0
-	blink tr1,r63
-
-L8_15:	/* 8..15 byte memcpy cntd. */
-	stlo.q r2, 0, r0
-	or r6, r7, r6
-	sthi.q r5, -1, r6
-	stlo.q r5, -8, r6
-	blink tr1,r63
-	
-	/* 2 or 3 byte memcpy */
-	ld.b r3,0,r0
-	ld.b r2,0,r63
-	ld.b r3,1,r1
-	st.b r2,0,r0
-	pta/l L2_3,tr0
-	ld.b r6,-1,r6
-	st.b r2,1,r1
-	blink tr0, r63
-
-	/* 4 .. 7 byte memcpy */
-	LDUAL (r3, 0, r0, r1)
-	pta L4_7, tr0
-	ldlo.l r6, -4, r7
-	or r0, r1, r0
-	sthi.l r2, 3, r0
-	ldhi.l r6, -1, r6
-	blink tr0, r63
-
-	/* 8 .. 15 byte memcpy */
-	LDUAQ (r3, 0, r0, r1)
-	pta L8_15, tr0
-	ldlo.q r6, -8, r7
-	or r0, r1, r0
-	sthi.q r2, 7, r0
-	ldhi.q r6, -1, r6
-	blink tr0, r63
-
-	/* 16 .. 24 byte memcpy */
-	LDUAQ (r3, 0, r0, r1)
-	LDUAQ (r3, 8, r8, r9)
-	or r0, r1, r0
-	sthi.q r2, 7, r0
-	or r8, r9, r8
-	sthi.q r2, 15, r8
-	ldlo.q r6, -8, r7
-	ldhi.q r6, -1, r6
-	stlo.q r2, 8, r8
-	stlo.q r2, 0, r0
-	or r6, r7, r6
-	sthi.q r5, -1, r6
-	stlo.q r5, -8, r6
-	blink tr1,r63
-
-Large:
-	ld.b r2, 0, r63
-	pta/l  Loop_ua, tr1
-	ori r3, -8, r7
-	sub r2, r7, r22
-	sub r3, r2, r6
-	add r2, r4, r5
-	ldlo.q r3, 0, r0
-	addi r5, -16, r5
-	movi 64+8, r27 // could subtract r7 from that.
-	stlo.q r2, 0, r0
-	sthi.q r2, 7, r0
-	ldx.q r22, r6, r0
-	bgtu/l r27, r4, tr1
-
-	addi r5, -48, r27
-	pta/l Loop_line, tr0
-	addi r6, 64, r36
-	addi r6, -24, r19
-	addi r6, -16, r20
-	addi r6, -8, r21
-
-Loop_line:
-	ldx.q r22, r36, r63
-	alloco r22, 32
-	addi r22, 32, r22
-	ldx.q r22, r19, r23
-	sthi.q r22, -25, r0
-	ldx.q r22, r20, r24
-	ldx.q r22, r21, r25
-	stlo.q r22, -32, r0
-	ldx.q r22, r6,  r0
-	sthi.q r22, -17, r23
-	sthi.q r22,  -9, r24
-	sthi.q r22,  -1, r25
-	stlo.q r22, -24, r23
-	stlo.q r22, -16, r24
-	stlo.q r22,  -8, r25
-	bgeu r27, r22, tr0
-
-Loop_ua:
-	addi r22, 8, r22
-	sthi.q r22, -1, r0
-	stlo.q r22, -8, r0
-	ldx.q r22, r6, r0
-	bgtu/l r5, r22, tr1
-
-	add r3, r4, r7
-	ldlo.q r7, -8, r1
-	sthi.q r22, 7, r0
-	ldhi.q r7, -1, r7
-	ptabs r18,tr1
-	stlo.q r22, 0, r0
-	or r1, r7, r1
-	sthi.q r5, 15, r1
-	stlo.q r5, 8, r1
-	blink tr1, r63
-
-	.size memcpy,.-memcpy

arch/sh/lib64/memset.S

-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-!
-! Fast SH memset
-!
-! by Toshiyasu Morita (tm@netcom.com)
-!
-! SH5 code by J"orn Rennecke (joern.rennecke@superh.com)
-! Copyright 2002 SuperH Ltd.
-!
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define SHHI shlld
-#define SHLO shlrd
-#else
-#define SHHI shlrd
-#define SHLO shlld
-#endif
-
-	.section .text..SHmedia32,"ax"
-	.globl	memset
-	.type	memset, @function
-
-	.align 5
-
-memset:
-	pta/l multiquad, tr0
-	andi r2, 7, r22
-	ptabs r18, tr2
-	mshflo.b r3,r3,r3
-	add r4, r22, r23
-	mperm.w r3, r63, r3	// Fill pattern now in every byte of r3
-
-	movi 8, r9
-	bgtu/u r23, r9, tr0 // multiquad
-
-	beqi/u r4, 0, tr2       // Return with size 0 - ensures no mem accesses
-	ldlo.q r2, 0, r7
-	shlli r4, 2, r4
-	movi -1, r8
-	SHHI r8, r4, r8
-	SHHI r8, r4, r8
-	mcmv r7, r8, r3
-	stlo.q r2, 0, r3
-	blink tr2, r63
-
-multiquad:
-	pta/l lastquad, tr0
-	stlo.q r2, 0, r3
-	shlri r23, 3, r24
-	add r2, r4, r5
-	beqi/u r24, 1, tr0 // lastquad
-	pta/l loop, tr1
-	sub r2, r22, r25
-	andi r5, -8, r20   // calculate end address and
-	addi r20, -7*8, r8 // loop end address; This might overflow, so we need
-	                   // to use a different test before we start the loop
-	bge/u r24, r9, tr1 // loop
-	st.q r25, 8, r3
-	st.q r20, -8, r3
-	shlri r24, 1, r24
-	beqi/u r24, 1, tr0 // lastquad
-	st.q r25, 16, r3
-	st.q r20, -16, r3
-	beqi/u r24, 2, tr0 // lastquad
-	st.q r25, 24, r3
-	st.q r20, -24, r3
-lastquad:
-	sthi.q r5, -1, r3
-	blink tr2,r63
-
-loop:
-!!!	alloco r25, 32	// QQQ comment out for short-term fix to SHUK #3895.
-			// QQQ commenting out is locically correct, but sub-optimal
-			// QQQ Sean McGoogan - 4th April 2003.
-	st.q r25, 8, r3
-	st.q r25, 16, r3
-	st.q r25, 24, r3
-	st.q r25, 32, r3
-	addi r25, 32, r25
-	bgeu/l r8, r25, tr1 // loop
-
-	st.q r20, -40, r3
-	st.q r20, -32, r3
-	st.q r20, -24, r3
-	st.q r20, -16, r3
-	st.q r20, -8, r3
-	sthi.q r5, -1, r3
-	blink tr2,r63
-
-	.size	memset,.-memset

arch/sh/lib64/panic.c

-/*
- * Copyright (C) 2003  Richard Curnow, SuperH UK Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-void
-panic_handler(unsigned long panicPC, unsigned long panicSSR,
-	      unsigned long panicEXPEVT)
-{
-	/* Never return from the panic handler */
-	for (;;) ;
-}

arch/sh/lib64/sdivsi3.S

-/* SPDX-License-Identifier: GPL-2.0 */
-	.global	__sdivsi3
-	.global	__sdivsi3_1
-	.global	__sdivsi3_2
-	.section	.text..SHmedia32,"ax"
-	.align	2
-
-	/* inputs: r4,r5 */
-	/* clobbered: r1,r18,r19,r20,r21,r25,tr0 */
-	/* result in r0 */
-__sdivsi3:
-__sdivsi3_1:
-	ptb __div_table,tr0
-	gettr tr0,r20
-
-__sdivsi3_2:
-	nsb r5, r1
-	shlld r5, r1, r25    /* normalize; [-2 ..1, 1..2) in s2.62 */
-	shari r25, 58, r21   /* extract 5(6) bit index (s2.4 with hole -1..1) */
-	/* bubble */
-	ldx.ub r20, r21, r19 /* u0.8 */
-	shari r25, 32, r25   /* normalize to s2.30 */
-	shlli r21, 1, r21
-	muls.l r25, r19, r19 /* s2.38 */
-	ldx.w r20, r21, r21  /* s2.14 */
-	ptabs r18, tr0
-	shari r19, 24, r19   /* truncate to s2.14 */
-	sub r21, r19, r19    /* some 11 bit inverse in s1.14 */
-	muls.l r19, r19, r21 /* u0.28 */
-	sub r63, r1, r1
-	addi r1, 92, r1
-	muls.l r25, r21, r18 /* s2.58 */
-	shlli r19, 45, r19   /* multiply by two and convert to s2.58 */
-	/* bubble */
-	sub r19, r18, r18
-	shari r18, 28, r18   /* some 22 bit inverse in s1.30 */
-	muls.l r18, r25, r0  /* s2.60 */
-	muls.l r18, r4, r25 /* s32.30 */
-	/* bubble */
-	shari r0, 16, r19   /* s-16.44 */
-	muls.l r19, r18, r19 /* s-16.74 */
-	shari r25, 63, r0
-	shari r4, 14, r18   /* s19.-14 */
-	shari r19, 30, r19   /* s-16.44 */
-	muls.l r19, r18, r19 /* s15.30 */
-	xor r21, r0, r21    /* You could also use the constant 1 << 27. */
-	add r21, r25, r21
-	sub r21, r19, r21
-	shard r21, r1, r21
-	sub r21, r0, r0
-	blink tr0, r63
-	
-/* This table has been generated by divtab.c .
-Defects for bias -330:
-   Max defect: 6.081536e-07 at -1.000000e+00
-   Min defect: 2.849516e-08 at 1.030651e+00
-   Max 2nd step defect: 9.606539e-12 at -1.000000e+00
-   Min 2nd step defect: 0.000000e+00 at 0.000000e+00
-   Defect at 1: 1.238659e-07
-   Defect at -2: 1.061708e-07 */
-
-	.balign 2
-	.type	__div_table,@object
-	.size	__div_table,128
-/* negative division constants */
-	.word	-16638
-	.word	-17135
-	.word	-17737
-	.word	-18433
-	.word	-19103
-	.word	-19751
-	.word	-20583
-	.word	-21383
-	.word	-22343
-	.word	-23353
-	.word	-24407
-	.word	-25582
-	.word	-26863
-	.word	-28382
-	.word	-29965
-	.word	-31800
-/* negative division factors */
-	.byte	66
-	.byte	70
-	.byte	75
-	.byte	81
-	.byte	87
-	.byte	93
-	.byte	101
-	.byte	109
-	.byte	119
-	.byte	130
-	.byte	142
-	.byte	156
-	.byte	172
-	.byte	192
-	.byte	214
-	.byte	241
-	.skip 16
-	.global	__div_table
-__div_table:
-	.skip 16
-/* positive division factors */
-	.byte	241
-	.byte	214
-	.byte	192
-	.byte	172
-	.byte	156
-	.byte	142
-	.byte	130
-	.byte	119
-	.byte	109
-	.byte	101
-	.byte	93
-	.byte	87
-	.byte	81
-	.byte	75
-	.byte	70
-	.byte	66
-/* positive division constants */
-	.word	31801
-	.word	29966
-	.word	28383
-	.word	26864
-	.word	25583
-	.word	24408
-	.word	23354
-	.word	22344
-	.word	21384
-	.word	20584
-	.word	19752
-	.word	19104
-	.word	18434
-	.word	17738
-	.word	17136
-	.word	16639

arch/sh/lib64/strcpy.S

-/* SPDX-License-Identifier: GPL-2.0 */
-/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
-/* Modified by SuperH, Inc. September 2003 */
-! Entry: arg0: destination
-!        arg1: source
-! Exit:  result: destination
-!
-! SH5 code Copyright 2002 SuperH Ltd.
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define SHHI shlld
-#define SHLO shlrd
-#else
-#define SHHI shlrd
-#define SHLO shlld
-#endif
-
-	.section .text..SHmedia32,"ax"
-	.globl	strcpy
-	.type	strcpy, @function
-	.align 5
-
-strcpy:
-
-	pta/l shortstring,tr1
-	ldlo.q r3,0,r4
-	ptabs r18,tr4
-	shlli r3,3,r7
-	addi r2, 8, r0
-	mcmpeq.b r4,r63,r6
-	SHHI r6,r7,r6
-	bnei/u r6,0,tr1 // shortstring
-	pta/l no_lddst, tr2
-	ori r3,-8,r23
-	sub r2, r23, r0
-	sub r3, r2, r21
-	addi r21, 8, r20
-	ldx.q r0, r21, r5
-	pta/l loop, tr0
-	ori r2,-8,r22
-	mcmpeq.b r5, r63, r6
-	bgt/u r22, r23, tr2 // no_lddst
-
-	// r22 < r23 :  Need to do a load from the destination.
-	// r22 == r23 : Doesn't actually need to load from destination,
-	//              but still can be handled here.
-	ldlo.q r2, 0, r9
-	movi -1, r8
-	SHLO r8, r7, r8
-	mcmv r4, r8, r9
-	stlo.q r2, 0, r9
-	beqi/l r6, 0, tr0 // loop
-
-	add r5, r63, r4
-	addi r0, 8, r0
-	blink tr1, r63 // shortstring
-no_lddst:
-	// r22 > r23: note that for r22 == r23 the sthi.q would clobber
-	//            bytes before the destination region.
-	stlo.q r2, 0, r4
-	SHHI r4, r7, r4
-	sthi.q r0, -1, r4
-	beqi/l r6, 0, tr0 // loop
-
-	add r5, r63, r4
-	addi r0, 8, r0
-shortstring:
-#if __BYTE_ORDER != __LITTLE_ENDIAN
-	pta/l shortstring2,tr1
-	byterev r4,r4
-#endif
-shortstring2:
-	st.b r0,-8,r4
-	andi r4,0xff,r5
-	shlri r4,8,r4
-	addi r0,1,r0
-	bnei/l r5,0,tr1
-	blink tr4,r63 // return
-	
-	.balign 8
-loop:
-	stlo.q r0, 0, r5
-	ldx.q r0, r20, r4
-	addi r0, 16, r0
-	sthi.q r0, -9, r5
-	mcmpeq.b r4, r63, r6
-	bnei/u r6, 0, tr1 // shortstring
-	ldx.q r0, r21, r5
-	stlo.q r0, -8, r4
-	sthi.q r0, -1, r4
-	mcmpeq.b r5, r63, r6
-	beqi/l r6, 0, tr0 // loop
-
-	add r5, r63, r4
-	addi r0, 8, r0
-	blink tr1, r63 // shortstring
-
-	.size	strcpy,.-strcpy

arch/sh/lib64/strlen.S

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Simplistic strlen() implementation for SHmedia.
- *
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- */
-
-	.section .text..SHmedia32,"ax"
-	.globl	strlen
-	.type	strlen,@function
-
-	.balign 16
-strlen:
-	ptabs	r18, tr4
-
-	/*
-	 * Note: We could easily deal with the NULL case here with a simple
-	 * sanity check, though it seems that the behavior we want is to fault
-	 * in the event that r2 == NULL, so we don't bother.
-	 */
-/*	beqi    r2, 0, tr4 */	! Sanity check
-
-	movi	-1, r0
-	pta/l	loop, tr0
-loop:
-	ld.b	r2, 0, r1
-	addi	r2, 1, r2
-	addi	r0, 1, r0
-	bnei/l	r1, 0, tr0
-
-	or	r0, r63, r2
-	blink	tr4, r63
-
-	.size	strlen,.-strlen

arch/sh/lib64/udelay.c

-/*
- * arch/sh/lib64/udelay.c
- *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/sched.h>
-#include <asm/param.h>
-
-/*
- * Use only for very small delays (< 1 msec).
- *
- * The active part of our cycle counter is only 32-bits wide, and
- * we're treating the difference between two marks as signed.  On
- * a 1GHz box, that's about 2 seconds.
- */
-
-void __delay(unsigned long loops)
-{
-	long long dummy;
-	__asm__ __volatile__("gettr	tr0, %1\n\t"
-			     "pta	$+4, tr0\n\t"
-			     "addi	%0, -1, %0\n\t"
-			     "bne	%0, r63, tr0\n\t"
-			     "ptabs	%1, tr0\n\t":"=r"(loops),
-			     "=r"(dummy)
-			     :"0"(loops));
-}
-
-void __const_udelay(unsigned long xloops)
-{
-	__delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
-}
-
-void __udelay(unsigned long usecs)
-{
-	__const_udelay(usecs * 0x000010c6);  /* 2**32 / 1000000 */
-}
-
-void __ndelay(unsigned long nsecs)
-{
-	__const_udelay(nsecs * 0x00000005);
-}

arch/sh/lib64/udivdi3.S

-/* SPDX-License-Identifier: GPL-2.0 */
-	.section	.text..SHmedia32,"ax"
-	.align	2
-	.global	__udivdi3
-__udivdi3:
-	shlri r3,1,r4
-	nsb r4,r22
-	shlld r3,r22,r6
-	shlri r6,49,r5
-	movi 0xffffffffffffbaf1,r21 /* .l shift count 17.  */
-	sub r21,r5,r1
-	mmulfx.w r1,r1,r4
-	mshflo.w r1,r63,r1
-	sub r63,r22,r20 // r63 == 64 % 64
-	mmulfx.w r5,r4,r4
-	pta large_divisor,tr0
-	addi r20,32,r9
-	msub.w r1,r4,r1
-	madd.w r1,r1,r1
-	mmulfx.w r1,r1,r4
-	shlri r6,32,r7
-	bgt/u r9,r63,tr0 // large_divisor
-	mmulfx.w r5,r4,r4
-	shlri r2,32+14,r19
-	addi r22,-31,r0
-	msub.w r1,r4,r1
-
-	mulu.l r1,r7,r4
-	addi r1,-3,r5
-	mulu.l r5,r19,r5
-	sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2
-	shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as
-	                 the case may be, %0000000000000000 000.11111111111, still */
-	muls.l r1,r4,r4 /* leaving at least one sign bit.  */
-	mulu.l r5,r3,r8
-	mshalds.l r1,r21,r1
-	shari r4,26,r4
-	shlld r8,r0,r8
-	add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5)
-	sub r2,r8,r2
-	/* Can do second step of 64 : 32 div now, using r1 and the rest in r2.  */
-
-	shlri r2,22,r21
-	mulu.l r21,r1,r21
-	shlld r5,r0,r8
-	addi r20,30-22,r0
-	shlrd r21,r0,r21
-	mulu.l r21,r3,r5
-	add r8,r21,r8
-	mcmpgt.l r21,r63,r21 // See Note 1
-	addi r20,30,r0
-	mshfhi.l r63,r21,r21
-	sub r2,r5,r2
-	andc r2,r21,r2
-
-	/* small divisor: need a third divide step */
-	mulu.l r2,r1,r7
-	ptabs r18,tr0
-	addi r2,1,r2
-	shlrd r7,r0,r7
-	mulu.l r7,r3,r5
-	add r8,r7,r8
-	sub r2,r3,r2
-	cmpgt r2,r5,r5
-	add r8,r5,r2
-	/* could test r3 here to check for divide by zero.  */
-	blink tr0,r63
-
-large_divisor:
-	mmulfx.w r5,r4,r4
-	shlrd r2,r9,r25
-	shlri r25,32,r8
-	msub.w r1,r4,r1
-
-	mulu.l r1,r7,r4
-	addi r1,-3,r5
-	mulu.l r5,r8,r5
-	sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2
-	shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as
-	                 the case may be, %0000000000000000 000.11111111111, still */
-	muls.l r1,r4,r4 /* leaving at least one sign bit.  */
-	shlri r5,14-1,r8
-	mulu.l r8,r7,r5
-	mshalds.l r1,r21,r1
-	shari r4,26,r4
-	add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5)
-	sub r25,r5,r25
-	/* Can do second step of 64 : 32 div now, using r1 and the rest in r25.  */
-
-	shlri r25,22,r21
-	mulu.l r21,r1,r21
-	pta no_lo_adj,tr0
-	addi r22,32,r0
-	shlri r21,40,r21
-	mulu.l r21,r7,r5
-	add r8,r21,r8
-	shlld r2,r0,r2
-	sub r25,r5,r25
-	bgtu/u r7,r25,tr0 // no_lo_adj
-	addi r8,1,r8
-	sub r25,r7,r25
-no_lo_adj:
-	mextr4 r2,r25,r2
-
-	/* large_divisor: only needs a few adjustments.  */
-	mulu.l r8,r6,r5
-	ptabs r18,tr0
-	/* bubble */
-	cmpgtu r5,r2,r5
-	sub r8,r5,r2
-	blink tr0,r63
-	
-/* Note 1: To shift the result of the second divide stage so that the result
-   always fits into 32 bits, yet we still reduce the rest sufficiently
-   would require a lot of instructions to do the shifts just right.  Using
-   the full 64 bit shift result to multiply with the divisor would require
-   four extra instructions for the upper 32 bits (shift / mulu / shift / sub).
-   Fortunately, if the upper 32 bits of the shift result are nonzero, we
-   know that the rest after taking this partial result into account will
-   fit into 32 bits.  So we just clear the upper 32 bits of the rest if the
-   upper 32 bits of the partial result are nonzero.  */

arch/sh/lib64/udivsi3.S

-/* SPDX-License-Identifier: GPL-2.0 */
-	.global	__udivsi3
-	.section	.text..SHmedia32,"ax"
-	.align	2
-
-/*
-   inputs: r4,r5
-   clobbered: r18,r19,r20,r21,r22,r25,tr0
-   result in r0.
- */
-__udivsi3:
-	addz.l r5,r63,r22
-	nsb r22,r0
-	shlld r22,r0,r25
-	shlri r25,48,r25
-	movi 0xffffffffffffbb0c,r20 /* shift count eqiv 76 */
-	sub r20,r25,r21
-	mmulfx.w r21,r21,r19
-	mshflo.w r21,r63,r21
-	ptabs r18,tr0
-	mmulfx.w r25,r19,r19
-	sub r20,r0,r0
-	/* bubble */
-	msub.w r21,r19,r19
-
-	/*
-	 * It would be nice for scheduling to do this add to r21 before
-	 * the msub.w, but we need a different value for r19 to keep
-	 * errors under control.
-	 */
-	addi r19,-2,r21
-	mulu.l r4,r21,r18
-	mmulfx.w r19,r19,r19
-	shlli r21,15,r21
-	shlrd r18,r0,r18
-	mulu.l r18,r22,r20
-	mmacnfx.wl r25,r19,r21
-	/* bubble */
-	sub r4,r20,r25
-
-	mulu.l r25,r21,r19
-	addi r0,14,r0
-	/* bubble */
-	shlrd r19,r0,r19
-	mulu.l r19,r22,r20
-	add r18,r19,r18
-	/* bubble */
-	sub.l r25,r20,r25
-
-	mulu.l r25,r21,r19
-	addz.l r25,r63,r25
-	sub r25,r22,r25
-	shlrd r19,r0,r19
-	mulu.l r19,r22,r20
-	addi r25,1,r25
-	add r18,r19,r18
-
-	cmpgt r25,r20,r25
-	add.l r18,r25,r0
-	blink tr0,r63

arch/sh/mm/Kconfig

@@ -15,8 +15,7 @@ config MMU
 
 config PAGE_OFFSET
 	hex
-	default "0x80000000" if MMU && SUPERH32
-	default "0x20000000" if MMU && SUPERH64
+	default "0x80000000" if MMU
 	default "0x00000000"
 
 config FORCE_MAX_ZONEORDER
@@ -72,12 +71,11 @@ config MEMORY_SIZE
 
 config 29BIT
 	def_bool !32BIT
-	depends on SUPERH32
 	select UNCACHED_MAPPING
 
 config 32BIT
 	bool
-	default y if CPU_SH5 || !MMU
+	default !MMU
 
 config PMB
 	bool "Support 32-bit physical addressing through PMB"
@@ -152,7 +150,7 @@ config ARCH_MEMORY_PROBE
 
 config IOREMAP_FIXED
        def_bool y
-       depends on X2TLB || SUPERH64
+       depends on X2TLB
 
 config UNCACHED_MAPPING
 	bool
@@ -184,7 +182,7 @@ config PAGE_SIZE_16KB
 
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on !MMU || CPU_SH4 || CPU_SH5
+	depends on !MMU || CPU_SH4
 	help
 	  This enables support for 64kB pages, possible on all SH-4
 	  CPUs and later.
@@ -216,10 +214,6 @@ config HUGETLB_PAGE_SIZE_64MB
 	bool "64MB"
 	depends on X2TLB
 
-config HUGETLB_PAGE_SIZE_512MB
-	bool "512MB"
-	depends on CPU_SH5
-
 endchoice
 
 config SCHED_MC
@@ -242,7 +236,7 @@ config SH7705_CACHE_32KB
 
 choice
 	prompt "Cache mode"
-	default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
+	default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
 	default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
 
 config CACHE_WRITEBACK

arch/sh/mm/Makefile

@@ -10,15 +10,14 @@ cacheops-$(CONFIG_CPU_SUBTYPE_SH7619)	:= cache-sh2.o
 cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
 cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
 cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
 cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 cacheops-$(CONFIG_CPU_SHX3)		+= cache-shx3.o
 
 obj-y			+= $(cacheops-y)
 
 mmu-y			:= nommu.o extable_32.o
-mmu-$(CONFIG_MMU)	:= extable_$(BITS).o fault.o ioremap.o kmap.o \
-			   pgtable.o tlbex_$(BITS).o tlbflush_$(BITS).o
+mmu-$(CONFIG_MMU)	:= extable_32.o fault.o ioremap.o kmap.o \
+			   pgtable.o tlbex_32.o tlbflush_32.o
 
 obj-y			+= $(mmu-y)
 
@@ -31,7 +30,6 @@ ifdef CONFIG_MMU
 debugfs-$(CONFIG_CPU_SH4)	+= tlb-debugfs.o
 tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
 tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o tlb-urb.o
-tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
 tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o tlb-urb.o
 obj-y				+= $(tlb-y)
 endif
@@ -46,29 +44,4 @@ obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
 
 GCOV_PROFILE_pmb.o := n
 
-# Special flags for tlbex_64.o.  This puts restrictions on the number of
-# caller-save registers that the compiler can target when building this file.
-# This is required because the code is called from a context in entry.S where
-# very few registers have been saved in the exception handler (for speed
-# reasons).
-# The caller save registers that have been saved and which can be used are
-# r2,r3,r4,r5 : argument passing
-# r15, r18 : SP and LINK
-# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
-#         use of them, so it's probably beneficial to performance to save them
-#         and have them available for it.
-#
-# The resources not listed below are callee save, i.e. the compiler is free to
-# use any of them and will spill them to the stack itself.
-
-CFLAGS_tlbex_64.o += -ffixed-r7 \
-	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
-	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
-	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
-	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
-	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
-	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
-	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
-	-fomit-frame-pointer
-
 ccflags-y := -Werror

arch/sh/mm/cache-sh5.c

-/*
- * arch/sh/mm/cache-sh5.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2002  Benedict Gaster
- * Copyright (C) 2003  Richard Curnow
- * Copyright (C) 2003 - 2008  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <asm/tlb.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/pgalloc.h>
-#include <linux/uaccess.h>
-#include <asm/mmu_context.h>
-
-extern void __weak sh4__flush_region_init(void);
-
-/* Wired TLB entry for the D-cache */
-static unsigned long long dtlb_cache_slot;
-
-/*
- * The following group of functions deal with mapping and unmapping a
- * temporary page into a DTLB slot that has been set aside for exclusive
- * use.
- */
-static inline void
-sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid,
-			   unsigned long paddr)
-{
-	local_irq_disable();
-	sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
-}
-
-static inline void sh64_teardown_dtlb_cache_slot(void)
-{
-	sh64_teardown_tlb_slot(dtlb_cache_slot);
-	local_irq_enable();
-}
-
-static inline void sh64_icache_inv_all(void)
-{
-	unsigned long long addr, flag, data;
-	unsigned long flags;
-
-	addr = ICCR0;
-	flag = ICCR0_ICI;
-	data = 0;
-
-	/* Make this a critical section for safety (probably not strictly necessary.) */
-	local_irq_save(flags);
-
-	/* Without %1 it gets unexplicably wrong */
-	__asm__ __volatile__ (
-		"getcfg	%3, 0, %0\n\t"
-		"or	%0, %2, %0\n\t"
-		"putcfg	%3, 0, %0\n\t"
-		"synci"
-		: "=&r" (data)
-		: "0" (data), "r" (flag), "r" (addr));
-
-	local_irq_restore(flags);
-}
-
-static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
-{
-	/* Invalidate range of addresses [start,end] from the I-cache, where
-	 * the addresses lie in the kernel superpage. */
-
-	unsigned long long ullend, addr, aligned_start;
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) end;
-
-	while (addr <= ullend) {
-		__asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-
-static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr)
-{
-	/* If we get called, we know that vma->vm_flags contains VM_EXEC.
-	   Also, eaddr is page-aligned. */
-	unsigned int cpu = smp_processor_id();
-	unsigned long long addr, end_addr;
-	unsigned long flags = 0;
-	unsigned long running_asid, vma_asid;
-	addr = eaddr;
-	end_addr = addr + PAGE_SIZE;
-
-	/* Check whether we can use the current ASID for the I-cache
-	   invalidation.  For example, if we're called via
-	   access_process_vm->flush_cache_page->here, (e.g. when reading from
-	   /proc), 'running_asid' will be that of the reader, not of the
-	   victim.
-
-	   Also, note the risk that we might get pre-empted between the ASID
-	   compare and blocking IRQs, and before we regain control, the
-	   pid->ASID mapping changes.  However, the whole cache will get
-	   invalidated when the mapping is renewed, so the worst that can
-	   happen is that the loop below ends up invalidating somebody else's
-	   cache entries.
-	*/
-
-	running_asid = get_asid();
-	vma_asid = cpu_asid(cpu, vma->vm_mm);
-	if (running_asid != vma_asid) {
-		local_irq_save(flags);
-		switch_and_save_asid(vma_asid);
-	}
-	while (addr < end_addr) {
-		/* Worth unrolling a little */
-		__asm__ __volatile__("icbi %0,  0" : : "r" (addr));
-		__asm__ __volatile__("icbi %0, 32" : : "r" (addr));
-		__asm__ __volatile__("icbi %0, 64" : : "r" (addr));
-		__asm__ __volatile__("icbi %0, 96" : : "r" (addr));
-		addr += 128;
-	}
-	if (running_asid != vma_asid) {
-		switch_and_save_asid(running_asid);
-		local_irq_restore(flags);
-	}
-}
-
-static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
-			  unsigned long start, unsigned long end)
-{
-	/* Used for invalidating big chunks of I-cache, i.e. assume the range
-	   is whole pages.  If 'start' or 'end' is not page aligned, the code
-	   is conservative and invalidates to the ends of the enclosing pages.
-	   This is functionally OK, just a performance loss. */
-
-	/* See the comments below in sh64_dcache_purge_user_range() regarding
-	   the choice of algorithm.  However, for the I-cache option (2) isn't
-	   available because there are no physical tags so aliases can't be
-	   resolved.  The icbi instruction has to be used through the user
-	   mapping.   Because icbi is cheaper than ocbp on a cache hit, it
-	   would be cheaper to use the selective code for a large range than is
-	   possible with the D-cache.  Just assume 64 for now as a working
-	   figure.
-	   */
-	int n_pages;
-
-	if (!mm)
-		return;
-
-	n_pages = ((end - start) >> PAGE_SHIFT);
-	if (n_pages >= 64) {
-		sh64_icache_inv_all();
-	} else {
-		unsigned long aligned_start;
-		unsigned long eaddr;
-		unsigned long after_last_page_start;
-		unsigned long mm_asid, current_asid;
-		unsigned long flags = 0;
-
-		mm_asid = cpu_asid(smp_processor_id(), mm);
-		current_asid = get_asid();
-
-		if (mm_asid != current_asid) {
-			/* Switch ASID and run the invalidate loop under cli */
-			local_irq_save(flags);
-			switch_and_save_asid(mm_asid);
-		}
-
-		aligned_start = start & PAGE_MASK;
-		after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
-
-		while (aligned_start < after_last_page_start) {
-			struct vm_area_struct *vma;
-			unsigned long vma_end;
-			vma = find_vma(mm, aligned_start);
-			if (!vma || (aligned_start <= vma->vm_end)) {
-				/* Avoid getting stuck in an error condition */
-				aligned_start += PAGE_SIZE;
-				continue;
-			}
-			vma_end = vma->vm_end;
-			if (vma->vm_flags & VM_EXEC) {
-				/* Executable */
-				eaddr = aligned_start;
-				while (eaddr < vma_end) {
-					sh64_icache_inv_user_page(vma, eaddr);
-					eaddr += PAGE_SIZE;
-				}
-			}
-			aligned_start = vma->vm_end; /* Skip to start of next region */
-		}
-
-		if (mm_asid != current_asid) {
-			switch_and_save_asid(current_asid);
-			local_irq_restore(flags);
-		}
-	}
-}
-
-static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
-{
-	/* The icbi instruction never raises ITLBMISS.  i.e. if there's not a
-	   cache hit on the virtual tag the instruction ends there, without a
-	   TLB lookup. */
-
-	unsigned long long aligned_start;
-	unsigned long long ull_end;
-	unsigned long long addr;
-
-	ull_end = end;
-
-	/* Just invalidate over the range using the natural addresses.  TLB
-	   miss handling will be OK (TBC).  Since it's for the current process,
-	   either we're already in the right ASID context, or the ASIDs have
-	   been recycled since we were last active in which case we might just
-	   invalidate another processes I-cache entries : no worries, just a
-	   performance drop for him. */
-	aligned_start = L1_CACHE_ALIGN(start);
-	addr = aligned_start;
-	while (addr < ull_end) {
-		__asm__ __volatile__ ("icbi %0, 0" : : "r" (addr));
-		__asm__ __volatile__ ("nop");
-		__asm__ __volatile__ ("nop");
-		addr += L1_CACHE_BYTES;
-	}
-}
-
-/* Buffer used as the target of alloco instructions to purge data from cache
-   sets by natural eviction. -- RPC */
-#define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
-static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, };
-
-static inline void sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
-{
-	/* Purge all ways in a particular block of sets, specified by the base
-	   set number and number of sets.  Can handle wrap-around, if that's
-	   needed.  */
-
-	int dummy_buffer_base_set;
-	unsigned long long eaddr, eaddr0, eaddr1;
-	int j;
-	int set_offset;
-
-	dummy_buffer_base_set = ((int)&dummy_alloco_area &
-				 cpu_data->dcache.entry_mask) >>
-				 cpu_data->dcache.entry_shift;
-	set_offset = sets_to_purge_base - dummy_buffer_base_set;
-
-	for (j = 0; j < n_sets; j++, set_offset++) {
-		set_offset &= (cpu_data->dcache.sets - 1);
-		eaddr0 = (unsigned long long)dummy_alloco_area +
-			(set_offset << cpu_data->dcache.entry_shift);
-
-		/*
-		 * Do one alloco which hits the required set per cache
-		 * way.  For write-back mode, this will purge the #ways
-		 * resident lines.  There's little point unrolling this
-		 * loop because the allocos stall more if they're too
-		 * close together.
-		 */
-		eaddr1 = eaddr0 + cpu_data->dcache.way_size *
-				  cpu_data->dcache.ways;
-
-		for (eaddr = eaddr0; eaddr < eaddr1;
-		     eaddr += cpu_data->dcache.way_size) {
-			__asm__ __volatile__ ("alloco %0, 0" : : "r" (eaddr));
-			__asm__ __volatile__ ("synco"); /* TAKum03020 */
-		}
-
-		eaddr1 = eaddr0 + cpu_data->dcache.way_size *
-				  cpu_data->dcache.ways;
-
-		for (eaddr = eaddr0; eaddr < eaddr1;
-		     eaddr += cpu_data->dcache.way_size) {
-			/*
-			 * Load from each address.  Required because
-			 * alloco is a NOP if the cache is write-through.
-			 */
-			if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
-				__raw_readb((unsigned long)eaddr);
-		}
-	}
-
-	/*
-	 * Don't use OCBI to invalidate the lines.  That costs cycles
-	 * directly.  If the dummy block is just left resident, it will
-	 * naturally get evicted as required.
-	 */
-}
-
-/*
- * Purge the entire contents of the dcache.  The most efficient way to
- * achieve this is to use alloco instructions on a region of unused
- * memory equal in size to the cache, thereby causing the current
- * contents to be discarded by natural eviction.  The alternative, namely
- * reading every tag, setting up a mapping for the corresponding page and
- * doing an OCBP for the line, would be much more expensive.
- */
-static void sh64_dcache_purge_all(void)
-{
-
-	sh64_dcache_purge_sets(0, cpu_data->dcache.sets);
-}
-
-
-/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for
-   anything else in the kernel */
-#define MAGIC_PAGE0_START 0xffffffffec000000ULL
-
-/* Purge the physical page 'paddr' from the cache.  It's known that any
- * cache lines requiring attention have the same page colour as the the
- * address 'eaddr'.
- *
- * This relies on the fact that the D-cache matches on physical tags when
- * no virtual tag matches.  So we create an alias for the original page
- * and purge through that.  (Alternatively, we could have done this by
- * switching ASID to match the original mapping and purged through that,
- * but that involves ASID switching cost + probably a TLBMISS + refill
- * anyway.)
- */
-static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr,
-					        unsigned long eaddr)
-{
-	unsigned long long magic_page_start;
-	unsigned long long magic_eaddr, magic_eaddr_end;
-
-	magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK);
-
-	/* As long as the kernel is not pre-emptible, this doesn't need to be
-	   under cli/sti. */
-	sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr);
-
-	magic_eaddr = magic_page_start;
-	magic_eaddr_end = magic_eaddr + PAGE_SIZE;
-
-	while (magic_eaddr < magic_eaddr_end) {
-		/* Little point in unrolling this loop - the OCBPs are blocking
-		   and won't go any quicker (i.e. the loop overhead is parallel
-		   to part of the OCBP execution.) */
-		__asm__ __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr));
-		magic_eaddr += L1_CACHE_BYTES;
-	}
-
-	sh64_teardown_dtlb_cache_slot();
-}
-
-/*
- * Purge a page given its physical start address, by creating a temporary
- * 1 page mapping and purging across that.  Even if we know the virtual
- * address (& vma or mm) of the page, the method here is more elegant
- * because it avoids issues of coping with page faults on the purge
- * instructions (i.e. no special-case code required in the critical path
- * in the TLB miss handling).
- */
-static void sh64_dcache_purge_phy_page(unsigned long paddr)
-{
-	unsigned long long eaddr_start, eaddr, eaddr_end;
-	int i;
-
-	/* As long as the kernel is not pre-emptible, this doesn't need to be
-	   under cli/sti. */
-	eaddr_start = MAGIC_PAGE0_START;
-	for (i = 0; i < (1 << CACHE_OC_N_SYNBITS); i++) {
-		sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr);
-
-		eaddr = eaddr_start;
-		eaddr_end = eaddr + PAGE_SIZE;
-		while (eaddr < eaddr_end) {
-			__asm__ __volatile__ ("ocbp %0, 0" : : "r" (eaddr));
-			eaddr += L1_CACHE_BYTES;
-		}
-
-		sh64_teardown_dtlb_cache_slot();
-		eaddr_start += PAGE_SIZE;
-	}
-}
-
-static void sh64_dcache_purge_user_pages(struct mm_struct *mm,
-				unsigned long addr, unsigned long end)
-{
-	pgd_t *pgd;
-	p4d_t *p4d;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	pte_t entry;
-	spinlock_t *ptl;
-	unsigned long paddr;
-
-	if (!mm)
-		return; /* No way to find physical address of page */
-
-	pgd = pgd_offset(mm, addr);
-	if (pgd_bad(*pgd))
-		return;
-
-	p4d = p4d_offset(pgd, addr);
-	if (p4d_none(*p4d) || p4d_bad(*p4d))
-		return;
-
-	pud = pud_offset(p4d, addr);
-	if (pud_none(*pud) || pud_bad(*pud))
-		return;
-
-	pmd = pmd_offset(pud, addr);
-	if (pmd_none(*pmd) || pmd_bad(*pmd))
-		return;
-
-	pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-	do {
-		entry = *pte;
-		if (pte_none(entry) || !pte_present(entry))
-			continue;
-		paddr = pte_val(entry) & PAGE_MASK;
-		sh64_dcache_purge_coloured_phy_page(paddr, addr);
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-	pte_unmap_unlock(pte - 1, ptl);
-}
-
-/*
- * There are at least 5 choices for the implementation of this, with
- * pros (+), cons(-), comments(*):
- *
- * 1. ocbp each line in the range through the original user's ASID
- *    + no lines spuriously evicted
- *    - tlbmiss handling (must either handle faults on demand => extra
- *	special-case code in tlbmiss critical path), or map the page in
- *	advance (=> flush_tlb_range in advance to avoid multiple hits)
- *    - ASID switching
- *    - expensive for large ranges
- *
- * 2. temporarily map each page in the range to a special effective
- *    address and ocbp through the temporary mapping; relies on the
- *    fact that SH-5 OCB* always do TLB lookup and match on ptags (they
- *    never look at the etags)
- *    + no spurious evictions
- *    - expensive for large ranges
- *    * surely cheaper than (1)
- *
- * 3. walk all the lines in the cache, check the tags, if a match
- *    occurs create a page mapping to ocbp the line through
- *    + no spurious evictions
- *    - tag inspection overhead
- *    - (especially for small ranges)
- *    - potential cost of setting up/tearing down page mapping for
- *	every line that matches the range
- *    * cost partly independent of range size
- *
- * 4. walk all the lines in the cache, check the tags, if a match
- *    occurs use 4 * alloco to purge the line (+3 other probably
- *    innocent victims) by natural eviction
- *    + no tlb mapping overheads
- *    - spurious evictions
- *    - tag inspection overhead
- *
- * 5. implement like flush_cache_all
- *    + no tag inspection overhead
- *    - spurious evictions
- *    - bad for small ranges
- *
- * (1) can be ruled out as more expensive than (2).  (2) appears best
- * for small ranges.  The choice between (3), (4) and (5) for large
- * ranges and the range size for the large/small boundary need
- * benchmarking to determine.
- *
- * For now use approach (2) for small ranges and (5) for large ones.
- */
-static void sh64_dcache_purge_user_range(struct mm_struct *mm,
-			  unsigned long start, unsigned long end)
-{
-	int n_pages = ((end - start) >> PAGE_SHIFT);
-
-	if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) {
-		sh64_dcache_purge_all();
-	} else {
-		/* Small range, covered by a single page table page */
-		start &= PAGE_MASK;	/* should already be so */
-		end = PAGE_ALIGN(end);	/* should already be so */
-		sh64_dcache_purge_user_pages(mm, start, end);
-	}
-}
-
-/*
- * Invalidate the entire contents of both caches, after writing back to
- * memory any dirty data from the D-cache.
- */
-static void sh5_flush_cache_all(void *unused)
-{
-	sh64_dcache_purge_all();
-	sh64_icache_inv_all();
-}
-
-/*
- * Invalidate an entire user-address space from both caches, after
- * writing back dirty data (e.g. for shared mmap etc).
- *
- * This could be coded selectively by inspecting all the tags then
- * doing 4*alloco on any set containing a match (as for
- * flush_cache_range), but fork/exit/execve (where this is called from)
- * are expensive anyway.
- *
- * Have to do a purge here, despite the comments re I-cache below.
- * There could be odd-coloured dirty data associated with the mm still
- * in the cache - if this gets written out through natural eviction
- * after the kernel has reused the page there will be chaos.
- *
- * The mm being torn down won't ever be active again, so any Icache
- * lines tagged with its ASID won't be visible for the rest of the
- * lifetime of this ASID cycle.  Before the ASID gets reused, there
- * will be a flush_cache_all.  Hence we don't need to touch the
- * I-cache.  This is similar to the lack of action needed in
- * flush_tlb_mm - see fault.c.
- */
-static void sh5_flush_cache_mm(void *unused)
-{
-	sh64_dcache_purge_all();
-}
-
-/*
- * Invalidate (from both caches) the range [start,end) of virtual
- * addresses from the user address space specified by mm, after writing
- * back any dirty data.
- *
- * Note, 'end' is 1 byte beyond the end of the range to flush.
- */
-static void sh5_flush_cache_range(void *args)
-{
-	struct flusher_data *data = args;
-	struct vm_area_struct *vma;
-	unsigned long start, end;
-
-	vma = data->vma;
-	start = data->addr1;
-	end = data->addr2;
-
-	sh64_dcache_purge_user_range(vma->vm_mm, start, end);
-	sh64_icache_inv_user_page_range(vma->vm_mm, start, end);
-}
-
-/*
- * Invalidate any entries in either cache for the vma within the user
- * address space vma->vm_mm for the page starting at virtual address
- * 'eaddr'.   This seems to be used primarily in breaking COW.  Note,
- * the I-cache must be searched too in case the page in question is
- * both writable and being executed from (e.g. stack trampolines.)
- *
- * Note, this is called with pte lock held.
- */
-static void sh5_flush_cache_page(void *args)
-{
-	struct flusher_data *data = args;
-	struct vm_area_struct *vma;
-	unsigned long eaddr, pfn;
-
-	vma = data->vma;
-	eaddr = data->addr1;
-	pfn = data->addr2;
-
-	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
-
-	if (vma->vm_flags & VM_EXEC)
-		sh64_icache_inv_user_page(vma, eaddr);
-}
-
-static void sh5_flush_dcache_page(void *page)
-{
-	sh64_dcache_purge_phy_page(page_to_phys((struct page *)page));
-	wmb();
-}
-
-/*
- * Flush the range [start,end] of kernel virtual address space from
- * the I-cache.  The corresponding range must be purged from the
- * D-cache also because the SH-5 doesn't have cache snooping between
- * the caches.  The addresses will be visible through the superpage
- * mapping, therefore it's guaranteed that there no cache entries for
- * the range in cache sets of the wrong colour.
- */
-static void sh5_flush_icache_range(void *args)
-{
-	struct flusher_data *data = args;
-	unsigned long start, end;
-
-	start = data->addr1;
-	end = data->addr2;
-
-	__flush_purge_region((void *)start, end);
-	wmb();
-	sh64_icache_inv_kernel_range(start, end);
-}
-
-/*
- * For the address range [start,end), write back the data from the
- * D-cache and invalidate the corresponding region of the I-cache for the
- * current process.  Used to flush signal trampolines on the stack to
- * make them executable.
- */
-static void sh5_flush_cache_sigtramp(void *vaddr)
-{
-	unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES;
-
-	__flush_wback_region(vaddr, L1_CACHE_BYTES);
-	wmb();
-	sh64_icache_inv_current_user_range((unsigned long)vaddr, end);
-}
-
-void __init sh5_cache_init(void)
-{
-	local_flush_cache_all		= sh5_flush_cache_all;
-	local_flush_cache_mm		= sh5_flush_cache_mm;
-	local_flush_cache_dup_mm	= sh5_flush_cache_mm;
-	local_flush_cache_page		= sh5_flush_cache_page;
-	local_flush_cache_range		= sh5_flush_cache_range;
-	local_flush_dcache_page		= sh5_flush_dcache_page;
-	local_flush_icache_range	= sh5_flush_icache_range;
-	local_flush_cache_sigtramp	= sh5_flush_cache_sigtramp;
-
-	/* Reserve a slot for dcache colouring in the DTLB */
-	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
-
-	sh4__flush_region_init();
-}

arch/sh/mm/cache.c

@@ -355,12 +355,6 @@ void __init cpu_cache_init(void)
 		}
 	}
 
-	if (boot_cpu_data.family == CPU_FAMILY_SH5) {
-		extern void __weak sh5_cache_init(void);
-
-		sh5_cache_init();
-	}
-
 skip:
 	emit_cache_params();
 }

arch/sh/mm/extable_64.c

-/*
- * arch/sh/mm/extable_64.c
- *
- * Copyright (C) 2003 Richard Curnow
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * Cloned from the 2.5 SH version..
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/bsearch.h>
-#include <linux/rwsem.h>
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-extern unsigned long copy_user_memcpy, copy_user_memcpy_end;
-extern void __copy_user_fixup(void);
-
-static const struct exception_table_entry __copy_user_fixup_ex = {
-	.fixup = (unsigned long)&__copy_user_fixup,
-};
-
-/*
- * Some functions that may trap due to a bad user-mode address have too
- * many loads and stores in them to make it at all practical to label
- * each one and put them all in the main exception table.
- *
- * In particular, the fast memcpy routine is like this.  It's fix-up is
- * just to fall back to a slow byte-at-a-time copy, which is handled the
- * conventional way.  So it's functionally OK to just handle any trap
- * occurring in the fast memcpy with that fixup.
- */
-static const struct exception_table_entry *check_exception_ranges(unsigned long addr)
-{
-	if ((addr >= (unsigned long)&copy_user_memcpy) &&
-	    (addr <= (unsigned long)&copy_user_memcpy_end))
-		return &__copy_user_fixup_ex;
-
-	return NULL;
-}
-
-static int cmp_ex_search(const void *key, const void *elt)
-{
-	const struct exception_table_entry *_elt = elt;
-	unsigned long _key = *(unsigned long *)key;
-
-	/* avoid overflow */
-	if (_key > _elt->insn)
-		return 1;
-	if (_key < _elt->insn)
-		return -1;
-	return 0;
-}
-
-/* Simple binary search */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *base,
-		 const size_t num,
-		 unsigned long value)
-{
-	const struct exception_table_entry *mid;
-
-	mid = check_exception_ranges(value);
-	if (mid)
-		return mid;
-
-	return bsearch(&value, base, num,
-		       sizeof(struct exception_table_entry), cmp_ex_search);
-}
-
-int fixup_exception(struct pt_regs *regs)
-{
-	const struct exception_table_entry *fixup;
-
-	fixup = search_exception_tables(regs->pc);
-	if (fixup) {
-		regs->pc = fixup->fixup;
-		return 1;
-	}
-
-	return 0;
-}

arch/sh/mm/tlb-sh5.c

-/*
- * arch/sh/mm/tlb-sh5.c
- *
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- * Copyright (C) 2003  Richard Curnow <richard.curnow@superh.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/tlb.h>
-#include <asm/mmu_context.h>
-
-/**
- * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
- */
-int sh64_tlb_init(void)
-{
-	/* Assign some sane DTLB defaults */
-	cpu_data->dtlb.entries	= 64;
-	cpu_data->dtlb.step	= 0x10;
-
-	cpu_data->dtlb.first	= DTLB_FIXED | cpu_data->dtlb.step;
-	cpu_data->dtlb.next	= cpu_data->dtlb.first;
-
-	cpu_data->dtlb.last	= DTLB_FIXED |
-				  ((cpu_data->dtlb.entries - 1) *
-				   cpu_data->dtlb.step);
-
-	/* And again for the ITLB */
-	cpu_data->itlb.entries	= 64;
-	cpu_data->itlb.step	= 0x10;
-
-	cpu_data->itlb.first	= ITLB_FIXED | cpu_data->itlb.step;
-	cpu_data->itlb.next	= cpu_data->itlb.first;
-	cpu_data->itlb.last	= ITLB_FIXED |
-				  ((cpu_data->itlb.entries - 1) *
-				   cpu_data->itlb.step);
-
-	return 0;
-}
-
-/**
- * sh64_next_free_dtlb_entry - Find the next available DTLB entry
- */
-unsigned long long sh64_next_free_dtlb_entry(void)
-{
-	return cpu_data->dtlb.next;
-}
-
-/**
- * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
- */
-unsigned long long sh64_get_wired_dtlb_entry(void)
-{
-	unsigned long long entry = sh64_next_free_dtlb_entry();
-
-	cpu_data->dtlb.first += cpu_data->dtlb.step;
-	cpu_data->dtlb.next  += cpu_data->dtlb.step;
-
-	return entry;
-}
-
-/**
- * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
- *
- * @entry:	Address of TLB slot.
- *
- * Works like a stack, last one to allocate must be first one to free.
- */
-int sh64_put_wired_dtlb_entry(unsigned long long entry)
-{
-	__flush_tlb_slot(entry);
-
-	/*
-	 * We don't do any particularly useful tracking of wired entries,
-	 * so this approach works like a stack .. last one to be allocated
-	 * has to be the first one to be freed.
-	 *
-	 * We could potentially load wired entries into a list and work on
-	 * rebalancing the list periodically (which also entails moving the
-	 * contents of a TLB entry) .. though I have a feeling that this is
-	 * more trouble than it's worth.
-	 */
-
-	/*
-	 * Entry must be valid .. we don't want any ITLB addresses!
-	 */
-	if (entry <= DTLB_FIXED)
-		return -EINVAL;
-
-	/*
-	 * Next, check if we're within range to be freed. (ie, must be the
-	 * entry beneath the first 'free' entry!
-	 */
-	if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step))
-		return -EINVAL;
-
-	/* If we are, then bring this entry back into the list */
-	cpu_data->dtlb.first	-= cpu_data->dtlb.step;
-	cpu_data->dtlb.next	= entry;
-
-	return 0;
-}
-
-/**
- * sh64_setup_tlb_slot - Load up a translation in a wired slot.
- *
- * @config_addr:	Address of TLB slot.
- * @eaddr:		Virtual address.
- * @asid:		Address Space Identifier.
- * @paddr:		Physical address.
- *
- * Load up a virtual<->physical translation for @eaddr<->@paddr in the
- * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
- */
-void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
-			 unsigned long asid, unsigned long paddr)
-{
-	unsigned long long pteh, ptel;
-
-	pteh = neff_sign_extend(eaddr);
-	pteh &= PAGE_MASK;
-	pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
-	ptel = neff_sign_extend(paddr);
-	ptel &= PAGE_MASK;
-	ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
-
-	asm volatile("putcfg %0, 1, %1\n\t"
-			"putcfg %0, 0, %2\n"
-			: : "r" (config_addr), "r" (ptel), "r" (pteh));
-}
-
-/**
- * sh64_teardown_tlb_slot - Teardown a translation.
- *
- * @config_addr:	Address of TLB slot.
- *
- * Teardown any existing mapping in the TLB slot @config_addr.
- */
-void sh64_teardown_tlb_slot(unsigned long long config_addr)
-	__attribute__ ((alias("__flush_tlb_slot")));
-
-static int dtlb_entry;
-static unsigned long long dtlb_entries[64];
-
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
-	unsigned long long entry;
-	unsigned long paddr, flags;
-
-	BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
-
-	local_irq_save(flags);
-
-	entry = sh64_get_wired_dtlb_entry();
-	dtlb_entries[dtlb_entry++] = entry;
-
-	paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
-	paddr &= ~PAGE_MASK;
-
-	sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
-
-	local_irq_restore(flags);
-}
-
-void tlb_unwire_entry(void)
-{
-	unsigned long long entry;
-	unsigned long flags;
-
-	BUG_ON(!dtlb_entry);
-
-	local_irq_save(flags);
-	entry = dtlb_entries[dtlb_entry--];
-
-	sh64_teardown_tlb_slot(entry);
-	sh64_put_wired_dtlb_entry(entry);
-
-	local_irq_restore(flags);
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-	unsigned long long ptel;
-	unsigned long long pteh=0;
-	struct tlb_info *tlbp;
-	unsigned long long next;
-	unsigned int fault_code = get_thread_fault_code();
-
-	/* Get PTEL first */
-	ptel = pte.pte_low;
-
-	/*
-	 * Set PTEH register
-	 */
-	pteh = neff_sign_extend(address & MMU_VPN_MASK);
-
-	/* Set the ASID. */
-	pteh |= get_asid() << PTEH_ASID_SHIFT;
-	pteh |= PTEH_VALID;
-
-	/* Set PTEL register, set_pte has performed the sign extension */
-	ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-
-	if (fault_code & FAULT_CODE_ITLB)
-		tlbp = &cpu_data->itlb;
-	else
-		tlbp = &cpu_data->dtlb;
-
-	next = tlbp->next;
-	__flush_tlb_slot(next);
-	asm volatile ("putcfg %0,1,%2\n\n\t"
-		      "putcfg %0,0,%1\n"
-		      :  : "r" (next), "r" (pteh), "r" (ptel) );
-
-	next += TLB_STEP;
-	if (next > tlbp->last)
-		next = tlbp->first;
-	tlbp->next = next;
-}

arch/sh/mm/tlbex_64.c

-/*
- * The SH64 TLB miss.
- *
- * Original code from fault.c
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * Fast PTE->TLB refill path
- * Copyright (C) 2003 Richard.Curnow@superh.com
- *
- * IMPORTANT NOTES :
- * The do_fast_page_fault function is called from a context in entry.S
- * where very few registers have been saved.  In particular, the code in
- * this file must be compiled not to use ANY caller-save registers that
- * are not part of the restricted save set.  Also, it means that code in
- * this file must not make calls to functions elsewhere in the kernel, or
- * else the excepting context will see corruption in its caller-save
- * registers.  Plus, the entry.S save area is non-reentrant, so this code
- * has to run with SR.BL==1, i.e. no interrupts taken inside it and panic
- * on any exception.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kprobes.h>
-#include <asm/tlb.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-
-static int handle_tlbmiss(unsigned long long protection_flags,
-			  unsigned long address)
-{
-	pgd_t *pgd;
-	p4d_t *p4d;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	pte_t entry;
-
-	if (is_vmalloc_addr((void *)address)) {
-		pgd = pgd_offset_k(address);
-	} else {
-		if (unlikely(address >= TASK_SIZE || !current->mm))
-			return 1;
-
-		pgd = pgd_offset(current->mm, address);
-	}
-
-	p4d = p4d_offset(pgd, address);
-	if (p4d_none(*p4d) || !p4d_present(*p4d))
-		return 1;
-
-	pud = pud_offset(p4d, address);
-	if (pud_none(*pud) || !pud_present(*pud))
-		return 1;
-
-	pmd = pmd_offset(pud, address);
-	if (pmd_none(*pmd) || !pmd_present(*pmd))
-		return 1;
-
-	pte = pte_offset_kernel(pmd, address);
-	entry = *pte;
-	if (pte_none(entry) || !pte_present(entry))
-		return 1;
-
-	/*
-	 * If the page doesn't have sufficient protection bits set to
-	 * service the kind of fault being handled, there's not much
-	 * point doing the TLB refill.  Punt the fault to the general
-	 * handler.
-	 */
-	if ((pte_val(entry) & protection_flags) != protection_flags)
-		return 1;
-
-	update_mmu_cache(NULL, address, pte);
-
-	return 0;
-}
-
-/*
- * Put all this information into one structure so that everything is just
- * arithmetic relative to a single base address.  This reduces the number
- * of movi/shori pairs needed just to load addresses of static data.
- */
-struct expevt_lookup {
-	unsigned short protection_flags[8];
-	unsigned char  is_text_access[8];
-	unsigned char  is_write_access[8];
-};
-
-#define PRU (1<<9)
-#define PRW (1<<8)
-#define PRX (1<<7)
-#define PRR (1<<6)
-
-/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether
-   the fault happened in user mode or privileged mode. */
-static struct expevt_lookup expevt_lookup_table = {
-	.protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW},
-	.is_text_access   = {1,   1,   0, 0, 0,   0,   0,   0}
-};
-
-static inline unsigned int
-expevt_to_fault_code(unsigned long expevt)
-{
-	if (expevt == 0xa40)
-		return FAULT_CODE_ITLB;
-	else if (expevt == 0x060)
-		return FAULT_CODE_WRITE;
-
-	return 0;
-}
-
-/*
-   This routine handles page faults that can be serviced just by refilling a
-   TLB entry from an existing page table entry.  (This case represents a very
-   large majority of page faults.) Return 1 if the fault was successfully
-   handled.  Return 0 if the fault could not be handled.  (This leads into the
-   general fault handling in fault.c which deals with mapping file-backed
-   pages, stack growth, segmentation faults, swapping etc etc)
- */
-asmlinkage int __kprobes
-do_fast_page_fault(unsigned long long ssr_md, unsigned long long expevt,
-		   unsigned long address)
-{
-	unsigned long long protection_flags;
-	unsigned long long index;
-	unsigned long long expevt4;
-	unsigned int fault_code;
-
-	/* The next few lines implement a way of hashing EXPEVT into a
-	 * small array index which can be used to lookup parameters
-	 * specific to the type of TLBMISS being handled.
-	 *
-	 * Note:
-	 *	ITLBMISS has EXPEVT==0xa40
-	 *	RTLBMISS has EXPEVT==0x040
-	 *	WTLBMISS has EXPEVT==0x060
-	 */
-	expevt4 = (expevt >> 4);
-	/* TODO : xor ssr_md into this expression too. Then we can check
-	 * that PRU is set when it needs to be. */
-	index = expevt4 ^ (expevt4 >> 5);
-	index &= 7;
-
-	fault_code = expevt_to_fault_code(expevt);
-
-	protection_flags = expevt_lookup_table.protection_flags[index];
-
-	if (expevt_lookup_table.is_text_access[index])
-		fault_code |= FAULT_CODE_ITLB;
-	if (!ssr_md)
-		fault_code |= FAULT_CODE_USER;
-
-	set_thread_fault_code(fault_code);
-
-	return handle_tlbmiss(protection_flags, address);
-}

arch/sh/mm/tlbflush_64.c

-/*
- * arch/sh/mm/tlb-flush_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 - 2012 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/signal.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/perf_event.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/tlb.h>
-#include <linux/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
-	unsigned long long match, pteh=0, lpage;
-	unsigned long tlb;
-
-	/*
-	 * Sign-extend based on neff.
-	 */
-	lpage = neff_sign_extend(page);
-	match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
-	match |= lpage;
-
-	for_each_itlb_entry(tlb) {
-		asm volatile ("getcfg	%1, 0, %0"
-			      : "=r" (pteh)
-			      : "r" (tlb) );
-
-		if (pteh == match) {
-			__flush_tlb_slot(tlb);
-			break;
-		}
-	}
-
-	for_each_dtlb_entry(tlb) {
-		asm volatile ("getcfg	%1, 0, %0"
-			      : "=r" (pteh)
-			      : "r" (tlb) );
-
-		if (pteh == match) {
-			__flush_tlb_slot(tlb);
-			break;
-		}
-
-	}
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
-	unsigned long flags;
-
-	if (vma->vm_mm) {
-		page &= PAGE_MASK;
-		local_irq_save(flags);
-		local_flush_tlb_one(get_asid(), page);
-		local_irq_restore(flags);
-	}
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-			   unsigned long end)
-{
-	unsigned long flags;
-	unsigned long long match, pteh=0, pteh_epn, pteh_low;
-	unsigned long tlb;
-	unsigned int cpu = smp_processor_id();
-	struct mm_struct *mm;
-
-	mm = vma->vm_mm;
-	if (cpu_context(cpu, mm) == NO_CONTEXT)
-		return;
-
-	local_irq_save(flags);
-
-	start &= PAGE_MASK;
-	end &= PAGE_MASK;
-
-	match = (cpu_asid(cpu, mm) << PTEH_ASID_SHIFT) | PTEH_VALID;
-
-	/* Flush ITLB */
-	for_each_itlb_entry(tlb) {
-		asm volatile ("getcfg	%1, 0, %0"
-			      : "=r" (pteh)
-			      : "r" (tlb) );
-
-		pteh_epn = pteh & PAGE_MASK;
-		pteh_low = pteh & ~PAGE_MASK;
-
-		if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
-			__flush_tlb_slot(tlb);
-	}
-
-	/* Flush DTLB */
-	for_each_dtlb_entry(tlb) {
-		asm volatile ("getcfg	%1, 0, %0"
-			      : "=r" (pteh)
-			      : "r" (tlb) );
-
-		pteh_epn = pteh & PAGE_MASK;
-		pteh_low = pteh & ~PAGE_MASK;
-
-		if (pteh_low == match && pteh_epn >= start && pteh_epn <= end)
-			__flush_tlb_slot(tlb);
-	}
-
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	unsigned long flags;
-	unsigned int cpu = smp_processor_id();
-
-	if (cpu_context(cpu, mm) == NO_CONTEXT)
-		return;
-
-	local_irq_save(flags);
-
-	cpu_context(cpu, mm) = NO_CONTEXT;
-	if (mm == current->mm)
-		activate_context(mm, cpu);
-
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_all(void)
-{
-	/* Invalidate all, including shared pages, excluding fixed TLBs */
-	unsigned long flags, tlb;
-
-	local_irq_save(flags);
-
-	/* Flush each ITLB entry */
-	for_each_itlb_entry(tlb)
-		__flush_tlb_slot(tlb);
-
-	/* Flush each DTLB entry */
-	for_each_dtlb_entry(tlb)
-		__flush_tlb_slot(tlb);
-
-	local_irq_restore(flags);
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-        /* FIXME: Optimize this later.. */
-        flush_tlb_all();
-}
-
-void __flush_tlb_global(void)
-{
-	flush_tlb_all();
-}

drivers/rtc/Kconfig

@@ -1516,7 +1516,7 @@ config RTC_DRV_GENERIC
 	tristate "Generic RTC support"
 	# Please consider writing a new RTC driver instead of using the generic
 	# RTC abstraction
-	depends on PARISC || M68K || PPC || SUPERH32 || COMPILE_TEST
+	depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
 	help
 	  Say Y or M here to enable RTC support on systems using the generic
 	  RTC abstraction. If you do not know what you are doing, you should

fs/Kconfig.binfmt

@@ -45,7 +45,7 @@ config ARCH_USE_GNU_PROPERTY
 config BINFMT_ELF_FDPIC
 	bool "Kernel support for FDPIC ELF binaries"
 	default y if !BINFMT_ELF
-	depends on (ARM || (SUPERH32 && !MMU) || C6X)
+	depends on (ARM || (SUPERH && !MMU) || C6X)
 	select ELFCORE
 	help
 	  ELF FDPIC binaries are based on ELF, but allow the individual load

scripts/headers_install.sh

@@ -81,9 +81,6 @@ arch/ia64/include/uapi/asm/cmpxchg.h:CONFIG_IA64_DEBUG_CMPXCHG
 arch/m68k/include/uapi/asm/ptrace.h:CONFIG_COLDFIRE
 arch/nios2/include/uapi/asm/swab.h:CONFIG_NIOS2_CI_SWAB_NO
 arch/nios2/include/uapi/asm/swab.h:CONFIG_NIOS2_CI_SWAB_SUPPORT
-arch/sh/include/uapi/asm/ptrace.h:CONFIG_CPU_SH5
-arch/sh/include/uapi/asm/sigcontext.h:CONFIG_CPU_SH5
-arch/sh/include/uapi/asm/stat.h:CONFIG_CPU_SH5
 arch/x86/include/uapi/asm/auxvec.h:CONFIG_IA32_EMULATION
 arch/x86/include/uapi/asm/auxvec.h:CONFIG_X86_64
 arch/x86/include/uapi/asm/mman.h:CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS

tools/arch/sh/include/asm/barrier.h

@@ -22,7 +22,7 @@
  * Historically we have only done this type of barrier for the MMUCR, but
  * it's also necessary for the CCR, so we make it generic here instead.
  */
-#if defined(__SH4A__) || defined(__SH5__)
+#if defined(__SH4A__)
 #define mb()		__asm__ __volatile__ ("synco": : :"memory")
 #define rmb()		mb()
 #define wmb()		mb()