Commit 3bda2e5d authored by Guangbin Huang's avatar Guangbin Huang Committed by David S. Miller

net: hns3: fix pause config problem after autoneg disabled

If a TP port is configured by follow steps:
1.ethtool -s ethx autoneg off speed 100 duplex full
2.ethtool -A ethx rx on tx on
3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
4.ethtool -s ethx autoneg off speed 100 duplex full

In step 3, driver will set rx&tx pause parameters of hardware to off as
pause parameters negotiated with link partner are off.

After step 4, the "ethtool -a ethx" command shows both rx and tx pause
parameters are on. However, pause parameters of hardware are still off
and port has no flow control function actually.

To fix this problem, if autoneg is disabled, driver uses its saved
parameters to restore pause of hardware. If the speed is not changed in
this case, there is no link state changed for phy, it will cause the pause
parameter is not taken effect, so we need to force phy to go down and up.

Fixes: aacbe27e ("net: hns3: modify how pause options is displayed")
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 440ffcdd
......@@ -568,6 +568,7 @@ struct hnae3_ae_ops {
u32 *auto_neg, u32 *rx_en, u32 *tx_en);
int (*set_pauseparam)(struct hnae3_handle *handle,
u32 auto_neg, u32 rx_en, u32 tx_en);
int (*restore_pauseparam)(struct hnae3_handle *handle);
int (*set_autoneg)(struct hnae3_handle *handle, bool enable);
int (*get_autoneg)(struct hnae3_handle *handle);
......
......@@ -824,6 +824,26 @@ static int hns3_check_ksettings_param(const struct net_device *netdev,
return 0;
}
static int hns3_set_phy_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
struct hnae3_handle *handle = hns3_get_handle(netdev);
const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
int ret;
if (cmd->base.speed == SPEED_1000 &&
cmd->base.autoneg == AUTONEG_DISABLE)
return -EINVAL;
if (cmd->base.autoneg == AUTONEG_DISABLE && ops->restore_pauseparam) {
ret = ops->restore_pauseparam(handle);
if (ret)
return ret;
}
return phy_ethtool_ksettings_set(netdev->phydev, cmd);
}
static int hns3_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
......@@ -842,16 +862,11 @@ static int hns3_set_link_ksettings(struct net_device *netdev,
cmd->base.autoneg, cmd->base.speed, cmd->base.duplex);
/* Only support ksettings_set for netdev with phy attached for now */
if (netdev->phydev) {
if (cmd->base.speed == SPEED_1000 &&
cmd->base.autoneg == AUTONEG_DISABLE)
return -EINVAL;
return phy_ethtool_ksettings_set(netdev->phydev, cmd);
} else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) &&
ops->set_phy_link_ksettings) {
if (netdev->phydev)
return hns3_set_phy_link_ksettings(netdev, cmd);
else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) &&
ops->set_phy_link_ksettings)
return ops->set_phy_link_ksettings(handle, cmd);
}
if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2)
return -EOPNOTSUPP;
......
......@@ -11021,6 +11021,35 @@ static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg,
return -EOPNOTSUPP;
}
static int hclge_restore_pauseparam(struct hnae3_handle *handle)
{
struct hclge_vport *vport = hclge_get_vport(handle);
struct hclge_dev *hdev = vport->back;
u32 auto_neg, rx_pause, tx_pause;
int ret;
hclge_get_pauseparam(handle, &auto_neg, &rx_pause, &tx_pause);
/* when autoneg is disabled, the pause setting of phy has no effect
* unless the link goes down.
*/
ret = phy_suspend(hdev->hw.mac.phydev);
if (ret)
return ret;
phy_set_asym_pause(hdev->hw.mac.phydev, rx_pause, tx_pause);
ret = phy_resume(hdev->hw.mac.phydev);
if (ret)
return ret;
ret = hclge_mac_pause_setup_hw(hdev);
if (ret)
dev_err(&hdev->pdev->dev,
"restore pauseparam error, ret = %d.\n", ret);
return ret;
}
static void hclge_get_ksettings_an_result(struct hnae3_handle *handle,
u8 *auto_neg, u32 *speed, u8 *duplex)
{
......@@ -12984,6 +13013,7 @@ static const struct hnae3_ae_ops hclge_ops = {
.halt_autoneg = hclge_halt_autoneg,
.get_pauseparam = hclge_get_pauseparam,
.set_pauseparam = hclge_set_pauseparam,
.restore_pauseparam = hclge_restore_pauseparam,
.set_mtu = hclge_set_mtu,
.reset_queue = hclge_reset_tqp,
.get_stats = hclge_get_stats,
......
......@@ -1435,7 +1435,7 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc)
return 0;
}
static int hclge_mac_pause_setup_hw(struct hclge_dev *hdev)
int hclge_mac_pause_setup_hw(struct hclge_dev *hdev)
{
bool tx_en, rx_en;
......
......@@ -244,6 +244,7 @@ int hclge_tm_get_pri_weight(struct hclge_dev *hdev, u8 pri_id, u8 *weight);
int hclge_tm_get_pri_shaper(struct hclge_dev *hdev, u8 pri_id,
enum hclge_opcode_type cmd,
struct hclge_tm_shaper_para *para);
int hclge_mac_pause_setup_hw(struct hclge_dev *hdev);
int hclge_tm_get_q_to_qs_map(struct hclge_dev *hdev, u16 q_id, u16 *qset_id);
int hclge_tm_get_q_to_tc(struct hclge_dev *hdev, u16 q_id, u8 *tc_id);
int hclge_tm_get_pg_to_pri_map(struct hclge_dev *hdev, u8 pg_id,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment