Skip to content

L
linux
Commit 3c3f42d6 authored by Paul Mackerras's avatar Paul Mackerras
Browse files
Options

powerpc: Start merging 64-bit support into powermac files 

Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent e574d238
Hide whitespace changes
Inline Side-by-side
Showing with 128 additions and 143 deletions
arch/powerpc/platforms/powermac/pci.c
View file @ 3c3f42d6
/*
* Support for PCI bridges found on Power Macintoshes.
* At present the "bandit" and "chaos" bridges are supported.
* Fortunately you access configuration space in the same
* way with either bridge.
*
* Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
* Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
......@@ -26,6 +23,10 @@
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#ifdef CONFIG_PPC64
#include <asm/iommu.h>
#include <asm/ppc-pci.h>
#endif
#undef DEBUG
......@@ -160,9 +161,13 @@ static unsigned long macrisc_cfg_access(struct pci_controller* hose,
static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose = bus->sysdata;
struct pci_controller *hose;
unsigned long addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
......@@ -187,9 +192,13 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose = bus->sysdata;
struct pci_controller *hose;
unsigned long addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
......@@ -221,7 +230,7 @@ static struct pci_ops macrisc_pci_ops =
};
/*
* Verifiy that a specific (bus, dev_fn) exists on chaos
* Verify that a specific (bus, dev_fn) exists on chaos
*/
static int
chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
......@@ -274,7 +283,6 @@ static struct pci_ops chaos_pci_ops =
};
#ifdef CONFIG_POWER4
/*
* These versions of U3 HyperTransport config space access ops do not
* implement self-view of the HT host yet
......@@ -342,11 +350,11 @@ static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose = bus->sysdata;
struct pci_controller *hose;
unsigned long addr;
struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
if (np == NULL)
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
......@@ -357,19 +365,19 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
case 0:
break;
case 1:
switch (len) {
case 1:
*val = 0xff; break;
case 2:
*val = 0xffff; break;
default:
*val = 0xfffffffful; break;
}
return PCIBIOS_SUCCESSFUL;
switch (len) {
case 1:
*val = 0xff; break;
case 2:
*val = 0xffff; break;
default:
*val = 0xfffffffful; break;
}
return PCIBIOS_SUCCESSFUL;
default:
return PCIBIOS_DEVICE_NOT_FOUND;
}
}
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
......@@ -391,11 +399,11 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose = bus->sysdata;
struct pci_controller *hose;
unsigned long addr;
struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
if (np == NULL)
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
......@@ -437,15 +445,13 @@ static struct pci_ops u3_ht_pci_ops =
u3_ht_read_config,
u3_ht_write_config
};
#endif /* CONFIG_POWER4 */
/*
* For a bandit bridge, turn on cache coherency if necessary.
* N.B. we could clean this up using the hose ops directly.
*/
static void __init
init_bandit(struct pci_controller *bp)
static void __init init_bandit(struct pci_controller *bp)
{
unsigned int vendev, magic;
int rev;
......@@ -485,8 +491,7 @@ init_bandit(struct pci_controller *bp)
/*
* Tweak the PCI-PCI bridge chip on the blue & white G3s.
*/
static void __init
init_p2pbridge(void)
static void __init init_p2pbridge(void)
{
struct device_node *p2pbridge;
struct pci_controller* hose;
......@@ -526,8 +531,7 @@ init_p2pbridge(void)
* EHCI part of it so it behaves like a pair of OHCI's. This fixup
* code re-enables it ;)
*/
static void __init
fixup_nec_usb2(void)
static void __init fixup_nec_usb2(void)
{
struct device_node *nec;
......@@ -567,77 +571,6 @@ fixup_nec_usb2(void)
}
}
void __init
pmac_find_bridges(void)
{
struct device_node *np, *root;
struct device_node *ht = NULL;
root = of_find_node_by_path("/");
if (root == NULL) {
printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
return;
}
for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
if (np->name == NULL)
continue;
if (strcmp(np->name, "bandit") == 0
|| strcmp(np->name, "chaos") == 0
|| strcmp(np->name, "pci") == 0) {
if (add_bridge(np) == 0)
of_node_get(np);
}
if (strcmp(np->name, "ht") == 0) {
of_node_get(np);
ht = np;
}
}
of_node_put(root);
/* Probe HT last as it relies on the agp resources to be already
* setup
*/
if (ht && add_bridge(ht) != 0)
of_node_put(ht);
init_p2pbridge();
fixup_nec_usb2();
/* We are still having some issues with the Xserve G4, enabling
* some offset between bus number and domains for now when we
* assign all busses should help for now
*/
if (pci_assign_all_busses)
pcibios_assign_bus_offset = 0x10;
#ifdef CONFIG_POWER4
/* There is something wrong with DMA on U3/HT. I haven't figured out
* the details yet, but if I set the cache line size to 128 bytes like
* it should, I'm getting memory corruption caused by devices like
* sungem (even without the MWI bit set, but maybe sungem doesn't
* care). Right now, it appears that setting up a 64 bytes line size
* works properly, 64 bytes beeing the max transfer size of HT, I
* suppose this is related the way HT/PCI are hooked together. I still
* need to dive into more specs though to be really sure of what's
* going on. --BenH.
*
* Ok, apparently, it's just that HT can't do more than 64 bytes
* transactions. MWI seem to be meaningless there as well, it may
* be worth nop'ing out pci_set_mwi too though I haven't done that
* yet.
*
* Note that it's a bit different for whatever is in the AGP slot.
* For now, I don't care, but this can become a real issue, we
* should probably hook pci_set_mwi anyway to make sure it sets
* the real cache line size in there.
*/
if (machine_is_compatible("MacRISC4"))
pci_cache_line_size = 16; /* 64 bytes */
pmac_check_ht_link();
#endif /* CONFIG_POWER4 */
}
#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \
| (((o) & ~3) << 24))
......@@ -703,7 +636,6 @@ setup_chaos(struct pci_controller* hose, struct reg_property* addr)
}
#ifdef CONFIG_POWER4
static void __init setup_u3_agp(struct pci_controller* hose)
{
/* On G5, we move AGP up to high bus number so we don't need
......@@ -715,7 +647,7 @@ static void __init setup_u3_agp(struct pci_controller* hose)
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->first_busno = 0xf0;
hose->first_busno = 0xf0;
hose->last_busno = 0xff;
has_uninorth = 1;
hose->ops = &macrisc_pci_ops;
......@@ -748,7 +680,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
*/
hose->io_base_phys = 0xf4000000;
hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
isa_io_base = (unsigned long) hose->io_base_virt;
isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt;
hose->io_resource.name = np->full_name;
hose->io_resource.start = 0;
hose->io_resource.end = 0x003fffff;
......@@ -794,13 +726,13 @@ static void __init setup_u3_ht(struct pci_controller* hose)
}
/* No, it's not the case, we need a hole */
if (cur == 2) {
/* not enough resources to make a hole, we drop part of the range */
/* not enough resources for a hole, we drop part of the range */
printk(KERN_WARNING "Running out of resources for /ht host !\n");
hose->mem_resources[cur].end = res->start - 1;
continue;
}
cur++;
DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
cur-1, res->start - 1, cur, res->end + 1);
hose->mem_resources[cur].name = np->full_name;
hose->mem_resources[cur].flags = IORESOURCE_MEM;
......@@ -981,7 +913,7 @@ static int __init add_bridge(struct device_node *dev)
if (device_is_compatible(dev, "uni-north")) {
primary = setup_uninorth(hose, addr);
disp_name = "UniNorth";
} else if (strcmp(dev->name, "pci") == 0) {
} else if (strcmp(dev->name, "pci") == 0) {
/* XXX assume this is a mpc106 (grackle) */
setup_grackle(hose);
disp_name = "Grackle (MPC106)";
......@@ -993,7 +925,7 @@ static int __init add_bridge(struct device_node *dev)
disp_name = "Chaos";
primary = 0;
}
printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n",
printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n",
disp_name, addr->address, hose->first_busno, hose->last_busno);
DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
hose, hose->cfg_addr, hose->cfg_data);
......@@ -1036,6 +968,50 @@ pmac_pcibios_fixup(void)
pcibios_fixup_OF_interrupts();
}
void __init pmac_find_bridges(void)
{
struct device_node *np, *root;
struct device_node *ht = NULL;
root = of_find_node_by_path("/");
if (root == NULL) {
printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
return;
}
for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
if (np->name == NULL)
continue;
if (strcmp(np->name, "bandit") == 0
|| strcmp(np->name, "chaos") == 0
|| strcmp(np->name, "pci") == 0) {
if (add_bridge(np) == 0)
of_node_get(np);
}
if (strcmp(np->name, "ht") == 0) {
of_node_get(np);
ht = np;
}
}
of_node_put(root);
/* Probe HT last as it relies on the agp resources to be already
* setup
*/
if (ht && add_bridge(ht) != 0)
of_node_put(ht);
init_p2pbridge();
fixup_nec_usb2();
/* We are still having some issues with the Xserve G4, enabling
* some offset between bus number and domains for now when we
* assign all busses should help for now
*/
if (pci_assign_all_busses)
pcibios_assign_bus_offset = 0x10;
}
int
pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
{
......
arch/powerpc/platforms/powermac/pic.c
View file @ 3c3f42d6
......@@ -25,6 +25,7 @@
#include <linux/sysdev.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/module.h>
#include <asm/sections.h>
#include <asm/io.h>
......@@ -32,12 +33,11 @@
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/time.h>
#include <asm/open_pic.h>
#include <asm/xmon.h>
#include <asm/pmac_feature.h>
#include <asm/mpic.h>
#include "pmac_pic.h"
#include "pmac.h"
/*
* XXX this should be in xmon.h, but putting it there means xmon.h
......@@ -46,6 +46,7 @@
*/
extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
#ifdef CONFIG_PPC32
struct pmac_irq_hw {
unsigned int event;
unsigned int enable;
......@@ -71,6 +72,9 @@ static u32 level_mask[4];
static DEFINE_SPINLOCK(pmac_pic_lock);
/* XXX here for now, should move to arch/powerpc/kernel/irq.c */
int ppc_do_canonicalize_irqs;
EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
#define GATWICK_IRQ_POOL_SIZE 10
static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
......@@ -377,11 +381,6 @@ static int __init enable_second_ohare(void)
return irqctrler->intrs[0].line;
}
static int pmac_u3_cascade(struct pt_regs *regs, void *data)
{
return mpic_get_one_irq((struct mpic *)data, regs);
}
#ifdef CONFIG_XMON
static struct irqaction xmon_action = {
.handler = xmon_irq,
......@@ -397,15 +396,23 @@ static struct irqaction gatwick_cascade_action = {
.mask = CPU_MASK_NONE,
.name = "cascade",
};
#endif /* CONFIG_PPC32 */
static int pmac_u3_cascade(struct pt_regs *regs, void *data)
{
return mpic_get_one_irq((struct mpic *)data, regs);
}
void __init pmac_pic_init(void)
{
int i;
struct device_node *irqctrler = NULL;
struct device_node *irqctrler2 = NULL;
struct device_node *np;
#ifdef CONFIG_PPC32
int i;
unsigned long addr;
int irq_cascade = -1;
#endif
struct mpic *mpic1, *mpic2;
/* We first try to detect Apple's new Core99 chipset, since mac-io
......@@ -455,7 +462,7 @@ void __init pmac_pic_init(void)
mpic_setup_cascade(irqctrler2->intrs[0].line,
pmac_u3_cascade, mpic2);
}
#ifdef CONFIG_XMON
#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
{
struct device_node* pswitch;
int nmi_irq;
......@@ -463,7 +470,7 @@ void __init pmac_pic_init(void)
pswitch = find_devices("programmer-switch");
if (pswitch && pswitch->n_intrs) {
nmi_irq = pswitch->intrs[0].line;
openpic_init_nmi_irq(nmi_irq);
mpic_irq_set_priority(nmi_irq, 9);
setup_irq(nmi_irq, &xmon_action);
}
}
......@@ -472,6 +479,7 @@ void __init pmac_pic_init(void)
}
irqctrler = NULL;
#ifdef CONFIG_PPC32
/* Get the level/edge settings, assume if it's not
* a Grand Central nor an OHare, then it's an Heathrow
* (or Paddington).
......@@ -570,6 +578,7 @@ void __init pmac_pic_init(void)
#ifdef CONFIG_XMON
setup_irq(20, &xmon_action);
#endif /* CONFIG_XMON */
#endif /* CONFIG_PPC32 */
}
#ifdef CONFIG_PM
......@@ -659,9 +668,10 @@ static struct sysdev_driver driver_pmacpic = {
static int __init init_pmacpic_sysfs(void)
{
#ifdef CONFIG_PPC32
if (max_irqs == 0)
return -ENODEV;
#endif
printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
sysdev_class_register(&pmacpic_sysclass);
sysdev_register(&device_pmacpic);
......
arch/powerpc/platforms/powermac/pmac.h
View file @ 3c3f42d6
......@@ -3,19 +3,31 @@
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/irq.h>
/*
* Declaration for the various functions exported by the
* pmac_* files. Mostly for use by pmac_setup
*/
extern void pmac_get_boot_time(struct rtc_time *tm);
extern void pmac_get_rtc_time(struct rtc_time *tm);
extern int pmac_set_rtc_time(struct rtc_time *tm);
extern long pmac_time_init(void);
extern unsigned long pmac_get_rtc_time(void);
extern int pmac_set_rtc_time(unsigned long nowtime);
extern void pmac_read_rtc_time(void);
extern void pmac_calibrate_decr(void);
extern void pmac_pcibios_fixup(void);
extern void pmac_find_bridges(void);
extern unsigned long pmac_ide_get_base(int index);
extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port, int *irq);
extern void pmac_nvram_update(void);
extern unsigned char pmac_nvram_read_byte(int addr);
extern void pmac_nvram_write_byte(int addr, unsigned char val);
extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial);
extern void pmac_pcibios_after_init(void);
extern int of_show_percpuinfo(struct seq_file *m, int i);
extern void pmac_pci_init(void);
extern void pmac_setup_pci_dma(void);
extern void pmac_check_ht_link(void);
......@@ -28,4 +40,9 @@ extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
extern void pmac_nvram_init(void);
extern struct hw_interrupt_type pmac_pic;
void pmac_pic_init(void);
int pmac_get_irq(struct pt_regs *regs);
#endif /* __PMAC_H__ */
arch/powerpc/platforms/powermac/setup.c
View file @ 3c3f42d6
......@@ -73,28 +73,10 @@
#include <asm/of_device.h>
#include <asm/mmu_context.h>
#include "pmac_pic.h"
#include "pmac.h"
#undef SHOW_GATWICK_IRQS
extern long pmac_time_init(void);
extern unsigned long pmac_get_rtc_time(void);
extern int pmac_set_rtc_time(unsigned long nowtime);
extern void pmac_read_rtc_time(void);
extern void pmac_calibrate_decr(void);
extern void pmac_pcibios_fixup(void);
extern void pmac_find_bridges(void);
extern unsigned long pmac_ide_get_base(int index);
extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port, int *irq);
extern void pmac_nvram_update(void);
extern unsigned char pmac_nvram_read_byte(int addr);
extern void pmac_nvram_write_byte(int addr, unsigned char val);
extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial);
extern void pmac_pcibios_after_init(void);
extern int of_show_percpuinfo(struct seq_file *m, int i);
unsigned char drive_info;
int ppc_override_l2cr = 0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7