Merge tag 'omap-for-v6.6/fixes-signed' of...

Merge tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps and ti-sysc

Fixes for several ti-sysc interconnect target module driver issues for
external abort on non-linefetch, am35x soc match, and uart module quirks
handling needed for devices to work and to allow device wake-up to work.

Fixes for droid4 boot time errors and warnings as noticed after boot doing
dmesg -lerr,warn. Let's also cut down the debug uart noise by using
overrun-throttle-ms, and downgrade the u-boot version warnings to
debug statements to further reduce the boot time noise with warnings.

* tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up
  ARM: omap2+: Downgrade u-boot version warnings to debug statements
  ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone
  ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot
  ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4
  bus: ti-sysc: Fix missing AM35xx SoC matching
  bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()

Link: https://lore.kernel.org/r/pull-1695715881-95183@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi

@@ -614,12 +614,12 @@ &rng_target {
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 &timer9 {
 	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
+	assigned-clock-parents = <&sys_32k_ck>;
 };
 
 /*
@@ -640,6 +640,7 @@ &uart1 {
 &uart3 {
 	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x17c>;
+	overrun-throttle-ms = <500>;
 };
 
 &uart4 {

arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi

@@ -12,8 +12,7 @@ cpu_thermal: cpu-thermal {
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;
 
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap>;
 
 	cpu_trips: trips {
 		cpu_alert0: cpu_alert {

arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi

@@ -12,7 +12,10 @@ cpu_thermal: cpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
 	polling-delay = <1000>; /* milliseconds */
 
-			/* sensor       ID */
+	/*
+	 * See 44xx files for single sensor addressing, omap5 and dra7 need
+	 * also sensor ID for addressing.
+	 */
 	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {

arch/arm/boot/dts/ti/omap/omap443x.dtsi

@@ -69,6 +69,7 @@ abb_iva: regulator-abb-iva {
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <0 20000>;
 };
 

arch/arm/boot/dts/ti/omap/omap4460.dtsi

@@ -79,6 +79,7 @@ abb_iva: regulator-abb-iva {
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <348 (-9301)>;
 };
 

arch/arm/mach-omap2/pm44xx.c

@@ -99,7 +99,7 @@ static int omap4_pm_suspend(void)
 		 * possible causes.
 		 * http://www.spinics.net/lists/arm-kernel/msg218641.html
 		 */
-		pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
+		pr_debug("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
 	} else {
 		pr_info("Successfully put all powerdomains to target state\n");
 	}
@@ -257,7 +257,7 @@ int __init omap4_pm_init(void)
 	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
 	 */
 	if (cpu_is_omap44xx())
-		pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
+		pr_debug("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {

drivers/bus/ti-sysc.c

@@ -38,6 +38,7 @@ enum sysc_soc {
 	SOC_2420,
 	SOC_2430,
 	SOC_3430,
+	SOC_AM35,
 	SOC_3630,
 	SOC_4430,
 	SOC_4460,
@@ -1097,6 +1098,11 @@ static int sysc_enable_module(struct device *dev)
 	if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE |
 				 SYSC_QUIRK_SWSUP_SIDLE_ACT)) {
 		best_mode = SYSC_IDLE_NO;
+
+		/* Clear WAKEUP */
+		if (regbits->enwkup_shift >= 0 &&
+		    ddata->cfg.sysc_val & BIT(regbits->enwkup_shift))
+			reg &= ~BIT(regbits->enwkup_shift);
 	} else {
 		best_mode = fls(ddata->cfg.sidlemodes) - 1;
 		if (best_mode > SYSC_IDLE_MASK) {
@@ -1224,6 +1230,13 @@ static int sysc_disable_module(struct device *dev)
 		}
 	}
 
+	if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) {
+		/* Set WAKEUP */
+		if (regbits->enwkup_shift >= 0 &&
+		    ddata->cfg.sysc_val & BIT(regbits->enwkup_shift))
+			reg |= BIT(regbits->enwkup_shift);
+	}
+
 	reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift);
 	reg |= best_mode << regbits->sidle_shift;
 	if (regbits->autoidle_shift >= 0 &&
@@ -1518,16 +1531,16 @@ struct sysc_revision_quirk {
 static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* These drivers need to be fixed to not use pm_runtime_irq_safe() */
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 
 	/* Quirks that need to be set based on the module address */
 	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@@ -1862,7 +1875,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 		dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n",
 			 __func__, val, irq_mask);
 
-	if (sysc_soc->soc == SOC_3430) {
+	if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) {
 		/* Clear DSS_SDI_CONTROL */
 		sysc_write(ddata, 0x44, 0);
 
@@ -2150,8 +2163,7 @@ static int sysc_reset(struct sysc *ddata)
 	}
 
 	if (ddata->cfg.srst_udelay)
-		usleep_range(ddata->cfg.srst_udelay,
-			     ddata->cfg.srst_udelay * 2);
+		fsleep(ddata->cfg.srst_udelay);
 
 	if (ddata->post_reset_quirk)
 		ddata->post_reset_quirk(ddata);
@@ -3025,6 +3037,7 @@ static void ti_sysc_idle(struct work_struct *work)
 static const struct soc_device_attribute sysc_soc_match[] = {
 	SOC_FLAG("OMAP242*", SOC_2420),
 	SOC_FLAG("OMAP243*", SOC_2430),
+	SOC_FLAG("AM35*", SOC_AM35),
 	SOC_FLAG("OMAP3[45]*", SOC_3430),
 	SOC_FLAG("OMAP3[67]*", SOC_3630),
 	SOC_FLAG("OMAP443*", SOC_4430),
@@ -3229,7 +3242,7 @@ static int sysc_check_active_timer(struct sysc *ddata)
 	 * can be dropped if we stop supporting old beagleboard revisions
 	 * A to B4 at some point.
 	 */
-	if (sysc_soc->soc == SOC_3430)
+	if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35)
 		error = -ENXIO;
 	else
 		error = -EBUSY;